ramips: DTS rework

[openwrt/openwrt.git] / target / linux / ramips / dts / E1700.dts

diff --git a/target/linux/ramips/dts/E1700.dts b/target/linux/ramips/dts/E1700.dts
index fafe25d0a7d171c86fc678c9d7d9dc1c9e71f6e9..ed1f178f1617000f2cd4bd64443ab03d98f10dea 100644 (file)
--- a/target/linux/ramips/dts/E1700.dts
+++ b/target/linux/ramips/dts/E1700.dts
@@ -16,109 +16,6 @@
        compatible = "linksys,e1700", "ralink,mt7620a-soc";
        model = "Linksys E1700";
 
-       palmbus@10000000 {
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "mx25l6405d";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "config";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x7b0000>;
-                               };
-                       };
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
-       ethernet@10100000 {
-               status = "okay";
-               mtd-mac-address = <&factory 0x28>;
-               pinctrl-names = "default";
-               pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
-               port@5 {
-                       status = "okay";
-                       mediatek,fixed-link = <1000 1 1 1>;
-                       phy-mode = "rgmii";
-               };
-
-               mdio-bus {
-                       status = "okay";
-
-                       phy0: ethernet-phy@0 {
-                               reg = <0>;
-                               phy-mode = "rgmii";
-                       };
-
-                       phy1: ethernet-phy@1 {
-                               reg = <1>;
-                               phy-mode = "rgmii";
-                       };
-
-                       phy2: ethernet-phy@2 {
-                               reg = <2>;
-                               phy-mode = "rgmii";
-                       };
-
-                       phy3: ethernet-phy@3 {
-                               reg = <3>;
-                               phy-mode = "rgmii";
-                       };
-
-                       phy4: ethernet-phy@4 {
-                               reg = <4>;
-                               phy-mode = "rgmii";
-                       };
-
-                       phy1f: ethernet-phy@1f {
-                               reg = <0x1f>;
-                               phy-mode = "rgmii";
-                       };
-               };
-       };
-
-       gsw@10110000 {
-               mediatek,port4 = "gmac";
-               mediatek,mt7530 = <1>;
-       };
-
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
@@ -152,3 +49,104 @@
                };
        };
 };
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0 0>;
+               linux,modalias = "m25p80", "mx25l6405d";
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "config";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x7b0000>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "uartf";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       status = "okay";
+       mtd-mac-address = <&factory 0x28>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+       port@5 {
+               status = "okay";
+               mediatek,fixed-link = <1000 1 1 1>;
+               phy-mode = "rgmii";
+       };
+
+       mdio-bus {
+               status = "okay";
+
+               phy0: ethernet-phy@0 {
+                       reg = <0>;
+                       phy-mode = "rgmii";
+               };
+
+               phy1: ethernet-phy@1 {
+                       reg = <1>;
+                       phy-mode = "rgmii";
+               };
+
+               phy2: ethernet-phy@2 {
+                       reg = <2>;
+                       phy-mode = "rgmii";
+               };
+
+               phy3: ethernet-phy@3 {
+                       reg = <3>;
+                       phy-mode = "rgmii";
+               };
+
+               phy4: ethernet-phy@4 {
+                       reg = <4>;
+                       phy-mode = "rgmii";
+               };
+
+               phy1f: ethernet-phy@1f {
+                       reg = <0x1f>;
+                       phy-mode = "rgmii";
+               };
+       };
+};
+
+&gsw {
+       mediatek,port4 = "gmac";
+       mediatek,mt7530 = <1>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};