ramips: remove DT pcie nodes for GL-MT300A/N

[openwrt/openwrt.git] / target / linux / ramips / dts / GL-MT300N.dts

diff --git a/target/linux/ramips/dts/GL-MT300N.dts b/target/linux/ramips/dts/GL-MT300N.dts
index 82db37eecd0d0976024394e249f4eb279f22bf60..7334bc7a2e96c6d54f9b1eca66d165d964321f29 100644 (file)
--- a/target/linux/ramips/dts/GL-MT300N.dts
+++ b/target/linux/ramips/dts/GL-MT300N.dts
@@ -1,112 +1,17 @@
 /dts-v1/;
 
-/include/ "mt7620n.dtsi"
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "GL-MT300N", "ralink,mt7620n-soc";
+       compatible = "GL-MT300N", "ralink,mt7620a-soc";
        model = "GL-MT300N";
 
        chosen {
                bootargs = "console=ttyS0,115200";
        };
 
-       palmbus@10000000 {
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
-               gpio1: gpio@638 {
-                       status = "okay";
-               };
-
-               gpio2: gpio@660 {
-                       status = "okay";
-               };
-               
-               gpio3: gpio@688 {
-                     status = "okay";
-                };
-
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "w25q128";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "w25q128";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0xf80000>;
-                               };
-
-                               partition@ff0000 {
-                                       label = "art";
-                                       reg = <0xff0000 0x10000>;
-                               };
-                       };
-               };
-       };
-
-       ehci@101c0000 {
-               status = "okay";
-       };
-
-       ohci@101c1000 {
-               status = "okay";
-       };
-
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x4000>;
-               ralink,port-map = "wllll";
-       };
-
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
-
-       pcie@10140000 {
-               status = "okay";
-
-               pcie-bridge {
-                       mt76@0,0 {
-                               reg = <0x0000 0 0 0 0>;
-                               device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 0x8000>;
-                               mediatek,2ghz = <0>;
-                       };
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "wled","ephy","i2c";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
 
@@ -135,19 +40,101 @@
                reset {
                        label = "reset";
                        gpios = <&gpio0 1 1>;
-                       linux,code = <0x198>;
+                       linux,code = <KEY_RESTART>;
                };
 
                BTN_0 {
                        label = "BTN_0";
                        gpios = <&gpio2 2 1>;
-                       linux,code = <0x100>;
+                       linux,code = <BTN_0>;
                };
 
            BTN_1 {
                        label = "BTN_1";
                        gpios = <&gpio2 3 1>;
-                       linux,code = <0x101>;
+                       linux,code = <BTN_1>;
+               };
+       };
+};
+
+&gpio0 {
+       status = "okay";
+};
+
+&gpio1 {
+       status = "okay";
+};
+
+&gpio2 {
+       status = "okay";
+};
+               
+&gpio3 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "w25q128";
+               reg = <0>;
+               linux,modalias = "m25p80", "w25q128";
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0xf80000>;
+               };
+
+               partition@ff0000 {
+                       label = "art";
+                       reg = <0xff0000 0x10000>;
+               };
+       };
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4000>;
+       ralink,port-map = "wllll";
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "wled","ephy","i2c";
+                       ralink,function = "gpio";
                };
        };
 };