ramips: DTS rework

[openwrt/openwrt.git] / target / linux / ramips / dts / MT7620a.dts

diff --git a/target/linux/ramips/dts/MT7620a.dts b/target/linux/ramips/dts/MT7620a.dts
index d3553349fcff18c5358f523f2c0b5d8b69da45c9..debe52e7f396711f7c073102d9c7ebf786561813 100644 (file)
--- a/target/linux/ramips/dts/MT7620a.dts
+++ b/target/linux/ramips/dts/MT7620a.dts
@@ -6,122 +6,120 @@
        compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
        model = "Ralink MT7620a + MT7610e evaluation board";
 
-       palmbus@10000000 {
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "en25q64";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x7b0000>;
-                               };
-                       };
+       gpio-keys-polled {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               s2 {
+                       label = "S2";
+                       gpios = <&gpio0 1 1>;
+                       linux,code = <0x100>;
                };
-       };
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "uartf";
-                               ralink,function = "gpio";
-                       };
+               s3 {
+                       label = "S3";
+                       gpios = <&gpio0 2 1>;
+                       linux,code = <0x101>;
                };
        };
+};
 
-       ethernet@10100000 {
-               status = "okay";
-               pinctrl-names = "default";
-               pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-               mediatek,portmap = "llllw";
+&spi0 {
+       status = "okay";
 
-               port@4 {
-                       status = "okay";
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy4>;
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0 0>;
+               linux,modalias = "m25p80", "en25q64";
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
                };
 
-               port@5 {
-                       status = "okay";
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy5>;
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
                };
 
-               mdio-bus {
-                       status = "okay";
-
-                       phy4: ethernet-phy@4 {
-                               reg = <4>;
-                               phy-mode = "rgmii";
-                       };
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
 
-                       phy5: ethernet-phy@5 {
-                               reg = <5>;
-                               phy-mode = "rgmii";
-                       };
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x7b0000>;
                };
        };
+};
 
-       gsw@10110000 {
-               mediatek,port4 = "gmac";
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "uartf";
+                       ralink,function = "gpio";
+               };
        };
+};
+
+&ethernet {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+       mediatek,portmap = "llllw";
 
-       sdhci@10130000 {
+       port@4 {
                status = "okay";
+               phy-mode = "rgmii";
+               phy-handle = <&phy4>;
        };
 
-       pcie@10140000 {
+       port@5 {
                status = "okay";
+               phy-mode = "rgmii";
+               phy-handle = <&phy5>;
        };
 
-       gpio-keys-polled {
-               compatible = "gpio-keys";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
+       mdio-bus {
+               status = "okay";
 
-               s2 {
-                       label = "S2";
-                       gpios = <&gpio0 1 1>;
-                       linux,code = <0x100>;
+               phy4: ethernet-phy@4 {
+                       reg = <4>;
+                       phy-mode = "rgmii";
                };
 
-               s3 {
-                       label = "S3";
-                       gpios = <&gpio0 2 1>;
-                       linux,code = <0x101>;
+               phy5: ethernet-phy@5 {
+                       reg = <5>;
+                       phy-mode = "rgmii";
                };
        };
+};
 
-       ehci@101c0000 {
-               status = "okay";
-       };
+&gsw {
+       mediatek,port4 = "gmac";
+};
 
-       ohci@101c1000 {
-               status = "okay";
-       };
+&sdhci {
+       status = "okay";
+};
+
+&pcie {
+       status = "okay";
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
 };