ramips: fix Youku-YK1 support

[openwrt/openwrt.git] / target / linux / ramips / dts / YOUKU-YK1.dts

diff --git a/target/linux/ramips/dts/YOUKU-YK1.dts b/target/linux/ramips/dts/YOUKU-YK1.dts
index 12c1d01caa5181046ccf1481621cd637e75104d1..8a0e0819ecf0b88d13d701493dadd0d314608846 100644 (file)
--- a/target/linux/ramips/dts/YOUKU-YK1.dts
+++ b/target/linux/ramips/dts/YOUKU-YK1.dts
@@ -1,115 +1,31 @@
 /dts-v1/;
 
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "YOUKU-YK1", "ralink,mt7620a-soc";
+       compatible = "youku,yk1", "ralink,mt7620a-soc";
        model = "YOUKU YK1";
 
-       palmbus@10000000 {
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
-               gpio1: gpio@638 {
-                       status = "okay";
-               };
-
-               gpio2: gpio@660 {
-                       status = "okay";
-               };
-
-               gpio3: gpio@688 {
-                       status = "okay";
-               };
-
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "w25q256";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "w25q256";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x1fb0000>;
-                               };
-                       };
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       default {
-                               ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
-       ethernet@10100000 {
-               pinctrl-names = "default";
-               pinctrl-0 = <&ephy_pins>;
-               mtd-mac-address = <&factory 0x4>;
-               mediatek,portmap = "llllw";
-       };
-
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
-
-       sdhci@b0130000 {
-               status = "okay";
-       };
-
-       ehci@101c0000 {
-               status = "okay";
-       };
-
-       ohci@101c1000 {
-               status = "okay";
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
                wan {
                        label = "youku-yk1:blue:wan";
-                       gpios = <&gpio2 4 1>;
+                       gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                };
                air {
                        label = "youku-yk1:blue:air";
-                       gpios = <&gpio3 0 1>;
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
                usb {
                        label = "youku-yk1:blue:usb";
-                       gpios = <&gpio1 11 1>;
+                       gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
                };
                power {
                        label = "youku-yk1:blue:power";
-                       gpios = <&gpio1 5 1>;
+                       gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -120,8 +36,90 @@
                poll-interval = <20>;
                reset {
                        label = "reset";
-                       gpios = <&gpio0 1 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+};
+
+&gpio0 {
+       status = "okay";
+};
+
+&gpio1 {
+       status = "okay";
+};
+
+&gpio2 {
+       status = "okay";
+};
+
+&gpio3 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x1fb0000>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               default {
+                       ralink,group = "i2c", "rgmii1", "ephy", "wled";
+                       ralink,function = "gpio";
                };
        };
 };
+
+&ethernet {
+       pinctrl-names = "default";
+       mtd-mac-address = <&factory 0x4>;
+       mediatek,portmap = "llllw";
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&sdhci {
+       status = "okay";
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};