VMLINUX:=$(IMG_PREFIX)-vmlinux
UIMAGE:=$(IMG_PREFIX)-uImage
-ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
define Image/Build/Initramfs
$(call Image/Build/Profile/$(PROFILE),initramfs)
endef
-endif
-ifeq ($(CONFIG_SOC_RT288X),y)
-define kernel_entry
--a 0x88000000 -e 0x88000000
+DEVICE_VARS += DTS
+
+loadaddr-y := 0x80000000
+loadaddr-$(CONFIG_TARGET_ramips_rt288x) := 0x88000000
+loadaddr-$(CONFIG_TARGET_ramips_mt7621) := 0x80001000
+
+KERNEL_LOADADDR := $(loadaddr-y)
+
+KERNEL_DTB = kernel-bin | patch-dtb | lzma
+define Device/Default
+ KERNEL := $(KERNEL_DTB) | uImage lzma
+ IMAGES := sysupgrade.bin
+ IMAGE_SIZE := $(ralink_default_fw_size_8M)
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | check-size $$$$(IMAGE_SIZE) | pad-rootfs
endef
-else
-define kernel_entry
--a 0x80000000 -e 0x80000000
+
+define Build/patch-dtb
+ $(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $@.dtb ../dts/$(DTS).dts
+ $(STAGING_DIR_HOST)/bin/patch-dtb $@ $@.dtb
+endef
+
+define Build/trx
+ $(STAGING_DIR_HOST)/bin/trx \
+ -o $@ \
+ -m $(IMAGE_SIZE) \
+ -f $(word 1,$^) \
+ -a 4 -f $(word 2,$^)
+endef
+
+define Build/seama
+ $(STAGING_DIR_HOST)/bin/seama -i $@ $(1)
+ mv $@.seama $@
+endef
+
+define Build/seama-seal
+ $(call Build/seama,-s $@.seama $(1))
+endef
+
+define Build/relocate-kernel
+ ( \
+ dd if=$(KDIR)/relocate/loader.bin bs=32 conv=sync && \
+ perl -e '@s = stat("$@"); print pack("V", @s[7])' && \
+ cat $@ \
+ ) > $@.new
+ mv $@.new $@
endef
-endif
define MkCombineduImage
$(call PatchKernelLzma,$(2),$(3))
#
# The real magic happens inside these templates
#
-
+# $(1), compression method
+# $(2), filename of image data
+# $(3), output filename
define MkImage
$(eval imagename=$(if $(4),$(4),MIPS OpenWrt Linux-$(LINUX_VERSION)))
- -mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\
+ -mkimage -A mips -O linux -T kernel -C $(1) -a $(loadaddr-y) -e $(loadaddr-y) \
-n "$(imagename)" \
-d $(2) $(3)
endef
fi
endef
+define MkImageTpl/squashfs
+ $(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-$(if $(4),$(4),sysupgrade).bin)
+ $(STAGING_DIR_HOST)/bin/mktplinkfw2 -V "ver. 2.0" -B "$(2)" -j \
+ -o $(KDIR)/$(output_name) \
+ -k $(KDIR)/vmlinux-$(1)$(4).bin.lzma \
+ -r $(KDIR)/root.$(1)
+ $(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name)
+endef
+
+define MkImageTpl/initramfs
+ $(eval output_name=$(IMG_PREFIX)-$(2)-$(1).bin)
+ $(STAGING_DIR_HOST)/bin/mktplinkfw2 -V "ver. 2.0" -B "$(2)" -c \
+ -o $(KDIR)/$(output_name) \
+ -k $(KDIR)/vmlinux-$(1).bin.lzma
+ $(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name)
+endef
+
+# $(1), lowercase board name like "mt7620a_v22sg"
+# $(2), DTS filename without .dts extension
+# $(3), optional filename suffix, e.g. "-initramfs"
define PatchKernelLzmaDtb
cp $(KDIR)/vmlinux$(3) $(KDIR)/vmlinux-$(1)$(3)
$(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(KDIR)/$(2).dtb ../dts/$(2).dts
$(call CompressLzma,$(KDIR)/vmlinux-$(1)$(3),$(KDIR)/vmlinux-$(1)$(3).bin.lzma)
endef
+# $(1), lowercase board name
+# $(2), DTS filename without .dts extension
+# $(3), ih_name field of uImage header
+# $(4), optional filename suffix, e.g. "-initramfs"
define MkImageLzmaDtb
$(call PatchKernelLzmaDtb,$(1),$(2),$(4))
$(call MkImage,lzma,$(KDIR)/vmlinux-$(1)$(4).bin.lzma,$(KDIR)/vmlinux-$(1)$(4).uImage,$(3))
endef
+# $(1), Rootfs type, e.g. squashfs
+# $(2), lowercase board name
+# $(3), DTS filename without .dts extension
+# $(4), maximum size of sysupgrade image
+# $(5), uImage header's ih_name field
define BuildFirmware/OF
$(call MkImageLzmaDtb,$(2),$(3),$(5))
$(call MkImageSysupgrade/$(1),$(1),$(2),$(4),$(6))
endef
+define BuildFirmware/OF/tplink
+ $(call PatchKernelLzmaDtb,$(1),$(2),$(4))
+ $(call MkImageTpl/$(1),$(1),$(2),$(4),$(5))
+endef
+
+define BuildFirmware/OF/tplink/initramfs
+ $(call PatchKernelLzmaDtb,$(2),$(3),-initramfs)
+ $(call MkImageTpl/$(1),$(1),$(2),$(4),$(5))
+endef
+
+# $(1), squashfs/initramfs
+# $(2), lowercase board name
+# $(3), DTS filename without .dts extension
+# $(4), ih_name field of uImage header
define BuildFirmware/OF/initramfs
$(call MkImageLzmaDtb,$(2),$(3),$(4),-initramfs)
$(CP) $(KDIR)/vmlinux-$(2)-initramfs.uImage $(call imgname,$(1),$(2))-uImage.bin
# $(2) = lowercase board name
# $(3) = dts file
ralink_default_fw_size_4M=3866624
-BuildFirmware/Default4M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_4M))
-BuildFirmware/Default4M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+BuildFirmware/Default4M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_4M),$(4))
+BuildFirmware/Default4M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
# Build images for default ralink layout for 8MB flash
# kernel + roots = 0x7b0000
# $(1) = squashfs/initramfs
# $(2) = lowercase board name
# $(3) = dts file
+# $(4) = uImage header name field
ralink_default_fw_size_8M=8060928
BuildFirmware/Default8M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M),$(4))
BuildFirmware/Default8M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
+BuildFirmware/Tplink/squashfs=$(call BuildFirmware/OF/tplink,$(1),$(2),$(3),$(4))
+BuildFirmware/Tplink/initramfs=$(call BuildFirmware/OF/tplink/initramfs,$(1),$(2),$(3),$(4))
+
+ralink_default_fw_size_16M=16121856
+BuildFirmware/Default16M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_16M),$(4))
+BuildFirmware/Default16M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
# Build images for a custom sized flash layout
# $(1) = squashfs/initramfs
# build Seama header images
define BuildFirmware/Seama/squashfs
- $(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M))
+ $(call MkImageLzmaDtb,$(2),$(3),$(5))
+ $(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-sysupgrade.bin)
cat $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/root.$(1) > $(KDIR)/img_$(2).$(1).tmp
- if [ `stat -c%s "$(KDIR)/img_$(2).$(1).tmp"` -gt 8060864 ]; then \
+ if [ `stat -c%s "$(KDIR)/img_$(2).$(1).tmp"` -gt $$$$(($(5) - 64)) ]; then \
echo "Warning: $(KDIR)/img_$(2).$(1).tmp is too big" >&2; \
else \
dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=64k conv=sync; \
-s $(call imgname,$(1),$(2))-factory.bin \
-m "signature=$(4)" \
-i $(KDIR)/vmlinux-$(2).tmp.seama; \
+ dd if=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=1 count=`expr \`stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma.padded\` - 64` of=$(KDIR)/vmlinux-$(2)-sysupgrade.tmp; \
+ $(STAGING_DIR_HOST)/bin/seama \
+ -i $(KDIR)/vmlinux-$(2)-sysupgrade.tmp \
+ -m "dev=/dev/mtdblock/2" -m "type=firmware"; \
+ ( \
+ dd if=$(KDIR)/vmlinux-$(2)-sysupgrade.tmp.seama; \
+ dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
+ ) > $(BIN_DIR)/$(output_name); \
fi
endef
BuildFirmware/Seama/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
endef
BuildFirmware/dap1350/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+# Sign Poray images
+define BuildFirmware/Poray4M/squashfs
+ $(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3))
+ if [ -e "$(call sysupname,$(1),$(2))" ]; then \
+ mkporayfw -B $(3) -F 4M \
+ -f $(call sysupname,$(1),$(2)) \
+ -o $(call imgname,$(1),$(2))-factory.bin; \
+ fi
+endef
+BuildFirmware/Poray4M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+
+define BuildFirmware/Poray8M/squashfs
+ $(call BuildFirmware/Default8M/$(1),$(1),$(2),$(3))
+ if [ -e "$(call sysupname,$(1),$(2))" ]; then \
+ mkporayfw -B $(3) -F 8M \
+ -f $(call sysupname,$(1),$(2)) \
+ -o $(call imgname,$(1),$(2))-factory.bin; \
+ fi
+endef
+BuildFirmware/Poray8M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+
+define BuildFirmware/PorayDualSize/squashfs
+ $(call BuildFirmware/DefaultDualSize/$(1),$(1),$(2),$(3))
+ if [ -e "$(call sysupname,$(1),$(2)-4M)" ]; then \
+ mkporayfw -B $(3) -F 4M \
+ -f $(call sysupname,$(1),$(2)-4M) \
+ -o $(call imgname,$(1),$(2)-4M)-factory.bin; \
+ fi
+ if [ -e "$(call sysupname,$(1),$(2)-8M)" ]; then \
+ mkporayfw -B $(3) -F 8M \
+ -f $(call sysupname,$(1),$(2)-8M) \
+ -o $(call imgname,$(1),$(2)-8M)-factory.bin; \
+ fi
+endef
+BuildFirmware/PorayDualSize/initramfs=$(call BuildFirmware/DefaultDualSize/initramfs,$(1),$(2),$(3))
+
+define BuildFirmware/Gemtek/squashfs
+ $(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3))
+ if [ -e "$(call sysupname,$(1),$(2))" ]; then \
+ mkheader_gemtek "$(call sysupname,$(1),$(2))" \
+ "$(call imgname,$(1),$(2))-factory.bin" $(2) || \
+ rm -f "$(call imgname,$(1),$(2))-factory.bin"; \
+ fi
+endef
+BuildFirmware/Gemtek/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+
+# Airlink101 AR670W -- LZMA without uImage header
+define BuildFirmware/AR670W/squashfs
+ $(call PatchKernelLzmaDtb,$(2),$(3),$(5))
+
+ $(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-$(if $(4),$(4),sysupgrade).bin)
+ $(eval factory_name=$(IMG_PREFIX)-$(2)-$(1)-factory.bin)
+
+ ( dd if=$(KDIR)/vmlinux-$(2).bin.lzma bs=65536 \
+ conv=sync; dd if=$(KDIR)/root.$(1) ) > $(KDIR)/$(output_name)
+
+ $(call prepare_generic_squashfs,$(KDIR)/$(output_name))
+
+ if [ `stat -c%s "$(KDIR)/$(output_name)"` \
+ -gt $(ralink_default_fw_size_4M) ]; then \
+ echo "Warning: $(KDIR)/$(output_name) is too big" >&2; \
+ else \
+ mkwrgimg -i $(KDIR)/$(output_name) \
+ -d "/dev/mtdblock/2" \
+ -s "wrgn16a_airlink_ar670w" \
+ -o $(BIN_DIR)/$(factory_name); \
+ $(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name); \
+ fi
+endef
+
#
# RT288X Profiles
#
+Image/Build/Profile/AR670W=$(call BuildFirmware/AR670W/$(1),$(1),ar670w,AR670W)
+
+Image/Build/Profile/AR725W=$(call BuildFirmware/Gemtek/$(1),$(1),ar725w,AR725W)
+
# 0x790000
belkin_f5d8235v1_mtd_size=7929856
Image/Build/Profile/F5D8235V1=$(call BuildFirmware/CustomFlash/$(1),$(1),f5d8235v1,F5D8235_V1,$(belkin_f5d8235v1_mtd_size))
Image/Build/Profile/WLITX4AG300N=$(call BuildFirmware/Default4M/$(1),$(1),wli-tx4-ag300n,WLI-TX4-AG300N)
+Image/Build/Profile/WZRAGL300NH=$(call BuildFirmware/Default4M/$(1),$(1),wzr-agl300nh,WZR-AGL300NH)
+
ifeq ($(SUBTARGET),rt288x)
define Image/Build/Profile/Default
+ $(call Image/Build/Profile/AR670W,$(1))
+ $(call Image/Build/Profile/AR725W,$(1))
$(call Image/Build/Profile/F5D8235V1,$(1))
$(call Image/Build/Profile/RTN15,$(1))
$(call Image/Build/Profile/V11STFE,$(1))
$(call Image/Build/Profile/WLITX4AG300N,$(1))
+ $(call Image/Build/Profile/WZRAGL300NH,$(1))
endef
endif
# RT305X Profiles
#
+Image/Build/Profile/DIR610A1=$(call BuildFirmware/Seama/$(1),$(1),dir-610-a1,DIR-610-A1,wrgn59_dlob.hans_dir610,$(ralink_default_fw_size_4M))
+
edimax_3g6200n_mtd_size=3735552
Image/Build/Profile/3G6200N=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200n,3G-6200N,$(edimax_3g6200n_mtd_size),CSYS,3G62,0x50000,0xc0000)
Image/Build/Profile/3G300M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),3g300m,3G300M,$(ralink_default_fw_size_4M),3G150M_SPI Kernel Image,factory)
+Image/Build/Profile/A5-V11=$(call BuildFirmware/Poray4M/$(1),$(1),a5-v11,A5-V11)
+
Image/Build/Profile/AIR3GII=$(call BuildFirmware/Default4M/$(1),$(1),air3gii,AIR3GII)
define BuildFirmware/UIMAGE_8M
endef
Image/Build/Profile/ASL26555=$(call BuildFirmware/ASL26555/$(1),$(1),asl26555,ASL26555)
+Image/Build/Profile/AWM002EVB=$(call BuildFirmware/DefaultDualSize/$(1),$(1),awm002-evb,AWM002-EVB)
+Image/Build/Profile/AWM003EVB=$(call BuildFirmware/Default8M/$(1),$(1),awm003-evb,AWM003-EVB)
+Image/Build/Profile/AWAPN2403=$(call BuildFirmware/Default4M/$(1),$(1),awmapn2403,AWAPN2403)
+
Image/Build/Profile/BC2=$(call BuildFirmware/Default8M/$(1),$(1),bc2,BC2)
broadway_mtd_size=7929856
define BuildFirmware/DIR615H1/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),dir-615-h1,DIR-615-H1)
- -mkdir615h1 -e $(call sysupname,$(1),dir-615-h1) \
- -o $(call imgname,$(1),dir-615-h1)-factory.bin
+ -mksenaofw -e $(call sysupname,$(1),dir-615-h1) \
+ -o $(call imgname,$(1),dir-615-h1)-factory.bin \
+ -r 0x218 -p 0x30 -t 3
endef
BuildFirmware/DIR615H1/initramfs=$(call BuildFirmware/OF/initramfs,$(1),dir-615-h1,DIR-615-H1)
Image/Build/Profile/DIR615H1=$(call BuildFirmware/DIR615H1/$(1),$(1))
Image/Build/Profile/DAP1350WW=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350WW,DAP-1350,RT3052-AP-DAP1350WW-3)
+define BuildFirmware/DCS930/squashfs
+ $(call BuildFirmware/Default4M/squashfs,squashfs,$(2),$(3))
+ dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/image.$(2).combined bs=1048512 count=1 conv=sync
+ cat $(KDIR)/root.squashfs >> $(KDIR)/image.$(2).combined
+ $(call MkImage,lzma,$(KDIR)/image.$(2).combined,$(KDIR)/image.$(2))
+ $(call prepare_generic_squashfs,$(KDIR)/image.$(2))
+ if [ `stat -c%s "$(KDIR)/image.$(2)"` -gt $(ralink_default_fw_size_4M) ]; then \
+ echo "Warning: $(KDIR)/image.$(2) is too big" >&2; \
+ else \
+ dd if=$(KDIR)/image.$(2) of=$(KDIR)/dcs.tmp bs=64K count=5 conv=sync ;\
+ cat $(KDIR)/image.$(2) >> $(KDIR)/dcs.tmp ; \
+ dd if=$(KDIR)/dcs.tmp of=$(call imgname,$(1),$(2))-factory.bin bs=4096k count=1 conv=sync ;\
+ $(STAGING_DIR_HOST)/bin/mkdcs932 $(call imgname,$(1),$(2))-factory.bin ; \
+ fi
+endef
+BuildFirmware/DCS930/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+Image/Build/Profile/DCS930=$(call BuildFirmware/DCS930/$(1),$(1),dcs-930,DCS-930)
+
Image/Build/Profile/ESR-9753=$(call BuildFirmware/Default4M/$(1),$(1),esr-9753,ESR-9753)
Image/Build/Profile/HW550-3G=$(call BuildFirmware/Default8M/$(1),$(1),hw550-3g,HW550-3G)
Image/Build/Profile/RT-N13U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n13u,RT-N13U)
+#Image/Build/Profile/HG255D=$(call BuildFirmware/Default16M/$(1),$(1),hg255d,HG255D)
+
Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freestation5,FREESTATION5)
+Image/Build/Profile/IP2202=$(call BuildFirmware/Default8M/$(1),$(1),ip2202,IP2202)
+
+BuildFirmware/HLKRM04/squashfs=$(call BuildFirmware/Default4M/squashfs,$(1),$(2),$(3),$(4))
+define BuildFirmware/HLKRM04/initramfs
+ $(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
+ mkhilinkfw -e -i$(call imgname,$(1),$(2))-uImage.bin -o $(call imgname,$(1),$(2))-factory.bin;
+endef
+Image/Build/Profile/HLKRM04=$(call BuildFirmware/HLKRM04/$(1),$(1),hlk-rm04,HLKRM04,HLK-RM02)
+
+Image/Build/Profile/HT-TM02=$(call BuildFirmware/Default8M/$(1),$(1),ht-tm02,HT-TM02)
+
+Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3)
+
+Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
+
Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
# Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI
+Image/Build/Profile/3G150B=$(call BuildFirmware/Default4M/$(1),$(1),3g150b,3G150B,Linux Kernel Image)
+
+Image/Build/Profile/MR102N=$(call BuildFirmware/Default8M/$(1),$(1),mr-102n,MR-102N)
+
+Image/Build/Profile/MPRA1=$(call BuildFirmware/Default4M/$(1),$(1),mpr-a1,MPRA1,Linux Kernel Image)
Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image)
+Image/Build/Profile/DIR-300-B7=$(call BuildFirmware/Default4M/$(1),$(1),dir-300-b7,DIR-300-B7)
+Image/Build/Profile/DIR-320-B1=$(call BuildFirmware/Default8M/$(1),$(1),dir-320-b1,DIR-320-B1)
+
Image/Build/Profile/NBG-419N=$(call BuildFirmware/Default4M/$(1),$(1),nbg-419n,NBG-419N)
Image/Build/Profile/MZKW300NH2=$(call BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000)
+Image/Build/Profile/NCS601W=$(call BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)
+
nw718_mtd_size=3801088
Image/Build/Profile/NW718=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)
+Image/Build/Profile/M2M=$(call BuildFirmware/Default8M/$(1),$(1),m2m,M2M,Linux Kernel Image)
+
Image/Build/Profile/OMNI-EMB=$(call BuildFirmware/Default8M/$(1),$(1),omni-emb,OMNI-EMB)
+Image/Build/Profile/OMNI-PLUG=$(call BuildFirmware/Default8M/$(1),$(1),omni-plug,OMNI-PLUG)
+
Image/Build/Profile/PSR-680W=$(call BuildFirmware/Default4M/$(1),$(1),psr-680w,PSR-680W)
Image/Build/Profile/PWH2004=$(call BuildFirmware/Default8M/$(1),$(1),pwh2004,PWH2004)
+Image/Build/Profile/PX4885=$(call BuildFirmware/DefaultDualSize/$(1),$(1),px4885,PX4885)
+
Image/Build/Profile/RTG32B1=$(call BuildFirmware/Default4M/$(1),$(1),rt-g32-b1,RT-G32-B1)
Image/Build/Profile/RTN10PLUS=$(call BuildFirmware/Default4M/$(1),$(1),rt-n10-plus,RT-N10-PLUS)
+Image/Build/Profile/RUT5XX=$(call BuildFirmware/Default8M/$(1),$(1),rut5xx,RUT5XX)
+
Image/Build/Profile/SL-R7205=$(call BuildFirmware/Default4M/$(1),$(1),sl-r7205,SL-R7205)
Image/Build/Profile/V22RW-2X2=$(call BuildFirmware/Default4M/$(1),$(1),v22rw-2x2,V22RW-2X2)
+Image/Build/Profile/VOCORE=$(call BuildFirmware/Default8M/$(1),$(1),vocore,VOCORE)
+
Image/Build/Profile/W150M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),w150m,W150M,$(ralink_default_fw_size_4M),W150M Kernel Image,factory)
Image/Build/Profile/W306R_V20=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),w306r-v20,W306R_V20,$(ralink_default_fw_size_4M),linkn Kernel Image,factory)
$(call BuildFirmware/Default4M/$(1),$(1),whr-g300n,WHR-G300N)
# the following line has a bad argument 3 ... the old Makefile was already broken
$(call BuildFirmware/Buffalo,$(1),whr-g300n,whr-g300n)
- ( \
- echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
- dd bs=512 count=1 conv=sync; \
- dd if=$(call sysupname,$(1),whr-g300n); \
- ) > $(KDIR)/whr-g300n-tftp.tmp
- buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
- -o $(call imgname,$(1),whr-g300n)-tftp.bin
+ if [ -e "$(call sysupname,$(1),$(2))" ]; then \
+ ( \
+ echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
+ dd bs=512 count=1 conv=sync; \
+ dd if=$(call sysupname,$(1),whr-g300n); \
+ ) > $(KDIR)/whr-g300n-tftp.tmp && \
+ buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
+ -o $(call imgname,$(1),whr-g300n)-tftp.bin; \
+ fi
endef
BuildFirmware/WHRG300N/initramfs=$(call BuildFirmware/OF/initramfs,$(1),whr-g300n,WHR-G300N)
Image/Build/Profile/WHRG300N=$(call BuildFirmware/WHRG300N/$(1),$(1))
+Image/Build/Profile/WIZARD8800=$(call BuildFirmware/Default8M/$(1),$(1),wizard-8800,WIZARD8800,Linux Kernel Image)
+
Image/Build/Profile/WL_330N=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n,WL_330N)
Image/Build/Profile/WL_330N3G=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n3g,WL_330N3G)
Image/Build/Profile/WR512-3GN=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wr512-3ng,WR512-3GN)
+Image/Build/Profile/WT1520=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt1520,WT1520)
+
Image/Build/Profile/UR-326N4G=$(call BuildFirmware/Default4M/$(1),$(1),ur-326n4g,UR-326N4G)
Image/Build/Profile/UR-336UN=$(call BuildFirmware/Default8M/$(1),$(1),ur-336un,UR-336UN)
Image/Build/Profile/WR6202=$(call BuildFirmware/Default8M/$(1),$(1),wr6202,WR6202)
+Image/Build/Profile/X5=$(call BuildFirmware/Poray8M/$(1),$(1),x5,X5)
+
+Image/Build/Profile/X8=$(call BuildFirmware/Poray8M/$(1),$(1),x8,X8)
+
Image/Build/Profile/XDXRN502J=$(call BuildFirmware/Default4M/$(1),$(1),xdxrn502j,XDXRN502J)
ifeq ($(SUBTARGET),rt305x)
define Image/Build/Profile/Default
$(call Image/Build/Profile/3G6200N,$(1))
$(call Image/Build/Profile/3G6200NL,$(1))
+ $(call Image/Build/Profile/3G150B,$(1))
$(call Image/Build/Profile/3G300M,$(1))
+ $(call Image/Build/Profile/A5-11,$(1))
$(call Image/Build/Profile/AIR3GII,$(1))
$(call Image/Build/Profile/ALL02393G,$(1))
$(call Image/Build/Profile/ALL0256N,$(1))
$(call Image/Build/Profile/ALL5003,$(1))
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
$(call Image/Build/Profile/ASL26555,$(1))
+ $(call Image/Build/Profile/AWM002EVB,$(1))
+ $(call Image/Build/Profile/AWAPN2403,$(1))
$(call Image/Build/Profile/BC2,$(1))
$(call Image/Build/Profile/BROADWAY,$(1))
$(call Image/Build/Profile/CARAMBOLA,$(1))
$(call Image/Build/Profile/D105,$(1))
$(call Image/Build/Profile/DIR-300-B1,$(1))
$(call Image/Build/Profile/DIR-600-B1,$(1))
+ $(call Image/Build/Profile/DIR-300-B7,$(1))
+ $(call Image/Build/Profile/DIR-320-B1,$(1))
$(call Image/Build/Profile/DIR-600-B2,$(1))
+ $(call Image/Build/Profile/DIR610A1,$(1))
$(call Image/Build/Profile/DIR-615-D,$(1))
$(call Image/Build/Profile/DIR-620-A1,$(1))
$(call Image/Build/Profile/DIR-620-D1,$(1))
$(call Image/Build/Profile/DIR615H1,$(1))
$(call Image/Build/Profile/DAP1350,$(1))
$(call Image/Build/Profile/DAP1350WW,$(1))
+ $(call Image/Build/Profile/DCS930,$(1))
$(call Image/Build/Profile/ESR-9753,$(1))
$(call Image/Build/Profile/F7C027,$(1))
$(call Image/Build/Profile/F5D8235V2,$(1))
$(call Image/Build/Profile/FONERA20N,$(1))
$(call Image/Build/Profile/FREESTATION5,$(1))
+# $(call Image/Build/Profile/HG255D,$(1))
+ $(call Image/Build/Profile/HLKRM04,$(1))
+ $(call Image/Build/Profile/HT-TM02,$(1))
$(call Image/Build/Profile/HW550-3G,$(1))
+ $(call Image/Build/Profile/IP2202,$(1))
+ $(call Image/Build/Profile/M2M,$(1))
+ $(call Image/Build/Profile/M3,$(1))
+ $(call Image/Build/Profile/M4,$(1))
$(call Image/Build/Profile/MOFI3500-3GN,$(1))
+ $(call Image/Build/Profile/MR102N,$(1))
+ $(call Image/Build/Profile/MPRA1,$(1))
$(call Image/Build/Profile/MPRA2,$(1))
$(call Image/Build/Profile/MZKW300NH2,$(1))
$(call Image/Build/Profile/NBG-419N,$(1))
+ $(call Image/Build/Profile/NCS601W,$(1))
$(call Image/Build/Profile/NW718,$(1))
$(call Image/Build/Profile/OMNI-EMB,$(1))
+ $(call Image/Build/Profile/OMNI-PLUG,$(1))
$(call Image/Build/Profile/PSR-680W,$(1))
$(call Image/Build/Profile/PWH2004,$(1))
+ $(call Image/Build/Profile/PX4885,$(1))
$(call Image/Build/Profile/RTG32B1,$(1))
$(call Image/Build/Profile/RTN10PLUS,$(1))
$(call Image/Build/Profile/RT-N13U,$(1))
+ $(call Image/Build/Profile/RUT5XX,$(1))
$(call Image/Build/Profile/SL-R7205,$(1))
$(call Image/Build/Profile/UR-326N4G,$(1))
$(call Image/Build/Profile/V22RW-2X2,$(1))
+ $(call Image/Build/Profile/VOCORE,$(1))
$(call Image/Build/Profile/W150M,$(1))
$(call Image/Build/Profile/W306R_V20,$(1))
$(call Image/Build/Profile/W502U,$(1))
$(call Image/Build/Profile/WCR150GN,$(1))
$(call Image/Build/Profile/WHRG300N,$(1))
+ $(call Image/Build/Profile/WIZARD8800,$(1))
$(call Image/Build/Profile/WL_330N,$(1))
$(call Image/Build/Profile/WL_330N3G,$(1))
$(call Image/Build/Profile/WL341V3,$(1))
$(call Image/Build/Profile/WNCE2001,$(1))
$(call Image/Build/Profile/WR512-3GN,$(1))
$(call Image/Build/Profile/WR6202,$(1))
+ $(call Image/Build/Profile/WT1520,$(1))
+ $(call Image/Build/Profile/X5,$(1))
+ $(call Image/Build/Profile/X8,$(1))
$(call Image/Build/Profile/XDXRN502J,$(1))
endef
endif
#
# RT3662/RT3883 Profiles
#
-Image/Build/Profile/DIR645=$(call BuildFirmware/Seama/$(1),$(1),dir-645,DIR-645,wrgn39_dlob.hans_dir645)
+
+# $(1) = squashfs/initramfs
+# $(2) = lowercase board name
+# $(3) = dts file
+# $(4) = kernel size
+# $(5) = rootfs size
+# $(6) = signature
+# $(7) = model
+# $(8) = flash address
+# $(9) = start address
+define BuildFirmware/EdimaxCombined/squashfs
+ $(call PatchKernelLzmaDtb,$(2),$(3))
+ $(call MkImage,lzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).bin.uImage)
+ if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.uImage"` -gt `expr $(4) - 20` ]; then \
+ echo "Warning: $(KDIR)/vmlinux-$(2).bin.uImage is too big" >&2; \
+ exit 1; \
+ else if [ `stat -c%s "$(KDIR)/root.$(1)"` -gt $(5) ]; then \
+ echo "Warning: $(KDIR)/root.$(1) is too big" >&2; \
+ exit 1; \
+ else \
+ ( dd if=$(KDIR)/vmlinux-$(2).bin.uImage bs=`expr $(4) - 20` conv=sync ; dd if=$(KDIR)/root.$(1) ) > $(KDIR)/vmlinux-$(2).bin.uImage.combined ; \
+ fi ; fi
+ mkedimaximg -i "$(KDIR)/vmlinux-$(2).bin.uImage.combined" \
+ -o $(call imgname,$(1),$(2)).bin \
+ -s $(6) -m $(7) -f $(8) -S $(9)
+endef
+
+Image/Build/Profile/CYSWR1100=$(call BuildFirmware/Seama/$(1),$(1),cy-swr1100,CY-SWR1100,wrgnd10_samsung_ss815,$(ralink_default_fw_size_8M))
+
+Image/Build/Profile/DIR645=$(call BuildFirmware/Seama/$(1),$(1),dir-645,DIR-645,wrgn39_dlob.hans_dir645,$(ralink_default_fw_size_8M))
omniembhpm_mtd_size=16449536
Image/Build/Profile/OMNIEMBHPM=$(call BuildFirmware/CustomFlash/$(1),$(1),omni-emb-hpm,OMNI-EMB-HPM,$(omniembhpm_mtd_size))
-Image/Build/Profile/RTN56U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n56u,RTN56U)
+define BuildFirmware/RTN56U/squashfs
+ $(call BuildFirmware/Default8M/$(1),$(1),rt-n56u,RTN56U)
+ -mkrtn56uimg -s $(call sysupname,$(1),rt-n56u)
+ -cp $(call sysupname,$(1),rt-n56u) $(call imgname,$(1),rt-n56u)-factory.bin
+ -mkrtn56uimg -f $(call imgname,$(1),rt-n56u)-factory.bin
+endef
+Image/Build/Profile/RTN56U=$(call BuildFirmware/RTN56U/$(1),$(1),rt-n56u,RTN56U)
Image/Build/Profile/TEW691GR=$(call BuildFirmware/UMedia/$(1),$(1),tew-691gr,TEW-691GR,0x026910)
-#Image/Build/Profile/TEW692GR=$(call BuildFirmware/UMedia/$(1),$(1),tew-692gr,TEW-692GR,0x026920)
+Image/Build/Profile/TEW692GR=$(call BuildFirmware/UMedia/$(1),$(1),tew-692gr,TEW-692GR,0x026920)
+
+kernel_size_BR6475ND:=2097152
+rootfs_size_BR6475ND:=5832704
+Image/Build/Profile/BR6475ND=$(call BuildFirmware/EdimaxCombined/$(1),$(1),br-6475nd,BR-6475ND,$(kernel_size_BR6475ND),$(rootfs_size_BR6475ND),CSYS,RN54,0x70000,0x01100000)
ifeq ($(SUBTARGET),rt3883)
define Image/Build/Profile/Default
+ $(call Image/Build/Profile/CYSWR1100,$(1))
$(call Image/Build/Profile/DIR645,$(1))
$(call Image/Build/Profile/OMNIEMBHPM,$(1))
$(call Image/Build/Profile/RTN56U,$(1))
+ $(call Image/Build/Profile/BR6475ND,$(1))
$(call Image/Build/Profile/TEW691GR,$(1))
$(call Image/Build/Profile/TEW692GR,$(1))
endef
# MT7620A Profiles
#
+Image/Build/Profile/E1700=$(call BuildFirmware/UMedia/$(1),$(1),e1700,E1700,0x013326)
Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7620a)
-
-ifeq ($(SUBTARGET),mt7620a)
+Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e)
+Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530)
+Image/Build/Profile/MT7620a_V22SG=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_v22sg,MT7620a_V22SG)
+br100_mtd_size=8126464
+Image/Build/Profile/AIBR100=$(call BuildFirmware/CustomFlash/$(1),$(1),ai-br100,AIBR100,$(br100_mtd_size),Ai-BR)
+Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53)
+whr_300hp2_mtd_size=7012352
+Image/Build/Profile/WHR300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size))
+Image/Build/Profile/WHR600D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-600d,WHR-600D,$(whr_300hp2_mtd_size))
+whr_1166d_mtd_size=15400960
+Image/Build/Profile/WHR1166D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-1166d,WHR-1166D,$(whr_1166hd_mtd_size))
+dlink810l_mtd_size=6881280
+Image/Build/Profile/CF-WR800N=$(call BuildFirmware/Default8M/$(1),$(1),cf-wr800n,CF-WR800N)
+Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
+na930_mtd_size=20971520
+Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
+Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
+Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1,Y1)
+Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1s,Y1S)
+Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221)
+Image/Build/Profile/MLWG2=$(call BuildFirmware/Default16M/$(1),$(1),mlwg2,MLWG2)
+Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
+Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
+Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
+Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
+Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020)
+Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),xiaomi-miwifi-mini,XIAOMI-MIWIFI-MINI)
+Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
+Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
+Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
+microwrt_mtd_size=16515072
+Image/Build/Profile/MicroWRT=$(call BuildFirmware/CustomFlash/$(1),$(1),microwrt,MicroWRT,$(microwrt_mtd_size))
+
+
+ifeq ($(SUBTARGET),mt7620)
define Image/Build/Profile/Default
+ $(call Image/Build/Profile/E1700,$(1))
$(call Image/Build/Profile/MT7620a,$(1))
+ $(call Image/Build/Profile/MT7620a_MT7610e,$(1))
+ $(call Image/Build/Profile/MT7620a_MT7530,$(1))
+ $(call Image/Build/Profile/MT7620a_V22SG,$(1))
+ $(call Image/Build/Profile/AIBR100,$(1))
+ $(call Image/Build/Profile/CF-WR800N,$(1))
+ $(call Image/Build/Profile/RP-N53,$(1))
+ $(call Image/Build/Profile/DIR-810L,$(1))
+ $(call Image/Build/Profile/WHR300HP2,$(1))
+ $(call Image/Build/Profile/WHR600D,$(1))
+ $(call Image/Build/Profile/WHR1166D,$(1))
+ $(call Image/Build/Profile/MZK-750DHP,$(1))
+ $(call Image/Build/Profile/NA930,$(1))
+ $(call Image/Build/Profile/Y1,$(1))
+ $(call Image/Build/Profile/Y1S,$(1))
+ $(call Image/Build/Profile/MLW221,$(1))
+ $(call Image/Build/Profile/MLWG2,$(1))
+ $(call Image/Build/Profile/WMR300,$(1))
+ $(call Image/Build/Profile/RT-N14U,$(1))
+ $(call Image/Build/Profile/WR8305RT,$(1))
+ $(call Image/Build/Profile/WRTNODE,$(1))
+ $(call Image/Build/Profile/WT3020,$(1))
+ $(call Image/Build/Profile/XIAOMI-MIWIFI-MINI,$(1))
+ $(call Image/Build/Profile/ZTE-Q7,$(1))
+ $(call Image/Build/Profile/ZBT-WA05,$(1))
+ $(call Image/Build/Profile/ArcherC20i,$(1))
+ $(call Image/Build/Profile/MicroWRT,$(1))
endef
endif
+#
+# MT7621 Profiles
+#
+
+ifeq ($(SUBTARGET),mt7621)
+ TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt
+endif
+
+define Device/mt7621
+ DTS := MT7621
+ IMAGE_SIZE := $(ralink_default_fw_size_4M)
+endef
+
+define Device/wsr-600
+ DTS := WSR-600
+endef
+
+define Device/wsr-1166
+ DTS := WSR-1166
+ IMAGE/sysupgrade.bin := trx | pad-rootfs
+endef
+
+define Device/dir-860l-b1
+ DTS := DIR-860L-B1
+ IMAGES += factory.bin
+ KERNEL := kernel-bin | patch-dtb | relocate-kernel | lzma | uImage lzma
+ IMAGE/sysupgrade.bin := \
+ append-kernel | pad-offset 65536 64 | append-rootfs | \
+ seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
+ pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin := \
+ append-kernel | pad-offset 65536 64 | append-rootfs | pad-rootfs -x 64 | \
+ seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
+ check-size $$$$(IMAGE_SIZE) | \
+ seama-seal -m "signature=wrgac13_dlink.2013gui_dir860lb"
+endef
+define Device/firewrt
+ DTS := FIREWRT
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+
+#
+# MT7628 Profiles
#
-# Generic Targets
+
+Image/Build/Profile/MT7628=$(call BuildFirmware/Default4M/$(1),$(1),mt7628,MT7628)
+
+ifeq ($(SUBTARGET),mt7628)
+define Image/Build/Profile/Default
+ $(call Image/Build/Profile/MT7628,$(1))
+endef
+endif
+
+ifndef TARGET_DEVICES
+#
+# Generic Targets - only needed for legacy image building code
#
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
$(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+endef
+
+define Image/BuildKernel/Initramfs
cp $(KDIR)/vmlinux-initramfs.elf $(BIN_DIR)/$(VMLINUX)-initramfs.elf
cp $(KDIR)/vmlinux-initramfs $(BIN_DIR)/$(VMLINUX)-initramfs.bin
$(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma)
$(call MkImage,lzma,$(KDIR)/vmlinux-initramfs.bin.lzma,$(KDIR)/uImage-initramfs.lzma)
cp $(KDIR)/uImage-initramfs.lzma $(BIN_DIR)/$(UIMAGE)-initramfs.bin
-endif
$(call Image/Build/Initramfs)
endef
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
$(call Image/Build/Profile/$(PROFILE),$(1))
endef
+endif
+
+ifeq ($(SUBTARGET),mt7621)
+define Build/Compile
+ rm -rf $(KDIR)/relocate
+ $(CP) ../../generic/image/relocate $(KDIR)
+ $(MAKE) -C $(KDIR)/relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS)
+endef
+endif
$(eval $(call BuildImage))