fi
endef
+# The OEM webinterface expects an kernel with initramfs which has the uImage
+# header field ih_name.
+# We don't wan't to set the header name field for the kernel include in the
+# sysupgrade image as well, as this image shouldn't be accepted by the OEM
+# webinterface. It will soft-brick the board.
+define Build/wr1201-factory-header
+ mkimage -A $(LINUX_KARCH) \
+ -O linux -T kernel \
+ -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
+ -n 'WR1201_8_128' -d $@ $@.new
+ mv $@.new $@
+endef
+
define Build/ubnt-erx-factory-image
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
echo '21001:6' > $(1).compat; \
define Device/11acnas
DTS := 11ACNAS
IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ UIMAGE_NAME := 11AC-NAS-Router(0.0.0)
DEVICE_TITLE := WeVO 11AC NAS Router
- DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
endef
TARGET_DEVICES += 11acnas
+define Device/alfa-network_quad-e4g
+ DTS := QUAD-E4G
+ IMAGE_SIZE := 16064k
+ DEVICE_TITLE := ALFA Network Quad-E4G
+ DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 \
+ uboot-envtools
+endef
+TARGET_DEVICES += alfa-network_quad-e4g
+
+define Device/asus_rt-ac57u
+ DTS := RT-AC57U
+ DEVICE_TITLE := ASUS RT-AC57U
+ IMAGE_SIZE := 16064k
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+endef
+TARGET_DEVICES += asus_rt-ac57u
+
define Device/dir-860l-b1
+ $(Device/seama)
DTS := DIR-860L-B1
BLOCKSIZE := 64k
- IMAGES += factory.bin
- KERNEL := kernel-bin | patch-dtb | relocate-kernel | lzma | uImage lzma
+ SEAMA_SIGNATURE := wrgac13_dlink.2013gui_dir860lb
+ KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
IMAGE_SIZE := $(ralink_default_fw_size_16M)
- IMAGE/sysupgrade.bin := \
- append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs | \
- seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
- pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := \
- append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
- append-rootfs | pad-rootfs -x 64 | \
- seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
- seama-seal -m "signature=wrgac13_dlink.2013gui_dir860lb" | \
- check-size $$$$(IMAGE_SIZE)
DEVICE_TITLE := D-Link DIR-860L B1
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
endef
endef
TARGET_DEVICES += mediatek_ap-mt7621a-v60
+define Device/xzwifi_creativebox-v1
+ DTS := CreativeBox-v1
+ IMAGE_SIZE := $(ralink_default_fw_size_32M)
+ DEVICE_TITLE := CreativeBox v1
+ DEVICE_PACKAGES := \
+ kmod-ata-core kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
+ kmod-usb3
+endef
+TARGET_DEVICES += xzwifi_creativebox-v1
+
define Device/elecom_wrc-1167ghbk2-s
DTS := WRC-1167GHBK2-S
IMAGE_SIZE := 15488k
endef
TARGET_DEVICES += firewrt
+define Device/gehua_ghl-r-001
+ DTS := GHL-R-001
+ IMAGE_SIZE := $(ralink_default_fw_size_32M)
+ DEVICE_TITLE := GeHua GHL-R-001
+ DEVICE_PACKAGES := \
+ kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+endef
+TARGET_DEVICES += gehua_ghl-r-001
+
define Device/gnubee_gb-pc1
DTS := GB-PC1
DEVICE_TITLE := GnuBee Personal Cloud One
endef
TARGET_DEVICES += k2p
-define Device/mir3g
+define Device/xiaomi_mir3p
+ DTS := MIR3P
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE:= 4096k
+ UBINIZE_OPTS := -E 5
+ IMAGE_SIZE := $(ralink_default_fw_size_32M)
+ DEVICE_TITLE := Xiaomi Mi Router 3 Pro
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
+ DEVICE_PACKAGES := \
+ kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic uboot-envtools
+endef
+TARGET_DEVICES += xiaomi_mir3p
+
+define Device/xiaomi_mir3g
DTS := MIR3G
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 4096k
- KERNEL := $(KERNEL_DTB) | uImage lzma
IMAGE_SIZE := 32768k
UBINIZE_OPTS := -E 5
- IMAGES := sysupgrade.tar kernel1.bin rootfs0.bin
+ IMAGES += kernel1.bin rootfs0.bin
IMAGE/kernel1.bin := append-kernel
IMAGE/rootfs0.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
- IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_TITLE := Xiaomi Mi Router 3G
SUPPORTED_DEVICES += R3G
+ SUPPORTED_DEVICES += mir3g
DEVICE_PACKAGES := \
kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic \
uboot-envtools
endef
-TARGET_DEVICES += mir3g
+TARGET_DEVICES += xiaomi_mir3g
define Device/mt7621
DTS := MT7621
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 4096k
- KERNEL := $(KERNEL_DTB) | uImage lzma
IMAGE_SIZE := 28672k
UBINIZE_OPTS := -E 5
- IMAGES := sysupgrade.tar kernel.bin rootfs.bin
- IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+ SERCOMM_HWID := AYA
+ SERCOMM_HWVER := A001
+ SERCOMM_SWVER := 0x0086
+ IMAGES += factory.img kernel.bin rootfs.bin
+ IMAGE/factory.img := pad-extra 2048k | append-kernel | pad-to 6144k | append-ubi | \
+ pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | zip R6220.bin | sercom-seal
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/kernel.bin := append-kernel
IMAGE/rootfs.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
DEVICE_TITLE := Netgear R6220
endef
TARGET_DEVICES += r6220
-define Device/rb750gr3
- DTS := RB750Gr3
- IMAGE_SIZE := $(ralink_default_fw_size_16M)
- DEVICE_TITLE := MikroTik RB750Gr3
- DEVICE_PACKAGES := kmod-usb3 uboot-envtools
+define Device/netgear_ex6150
+ DTS := EX6150
+ DEVICE_TITLE := Netgear EX6150
+ DEVICE_PACKAGES := kmod-mt76x2 wpad-basic
+ NETGEAR_BOARD_ID := U12H318T00_NETGEAR
+ IMAGE_SIZE := 14848k
+ IMAGES += factory.chk
+ IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | netgear-chk
endef
-TARGET_DEVICES += rb750gr3
+TARGET_DEVICES += netgear_ex6150
+
+define Device/netgear_r6350
+ DTS := R6350
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 40960k
+ UBINIZE_OPTS := -E 5
+ IMAGES += kernel.bin rootfs.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/kernel.bin := append-kernel
+ IMAGE/rootfs.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
+ DEVICE_TITLE := Netgear R6350
+ DEVICE_PACKAGES := \
+ kmod-mt7603 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+endef
+TARGET_DEVICES += netgear_r6350
define Device/MikroTik
BLOCKSIZE := 64k
DEVICE_PACKAGES := kmod-usb3
LOADER_TYPE := elf
PLATFORM := mt7621
- KERNEL := kernel-bin | patch-dtb | lzma | loader-kernel
+ KERNEL := $(KERNEL_DTB) | loader-kernel
IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
+define Device/mikrotik_rb750gr3
+ $(Device/MikroTik)
+ DTS := RB750Gr3
+ DEVICE_TITLE := MikroTik RouterBOARD RB750Gr3
+ DEVICE_PACKAGES += kmod-gpio-beeper
+endef
+TARGET_DEVICES += mikrotik_rb750gr3
+
define Device/mikrotik_rbm33g
$(Device/MikroTik)
DTS := RBM33G
endef
TARGET_DEVICES += mikrotik_rbm11g
+define Device/mtc_wr1201
+ DTS := WR1201
+ IMAGE_SIZE := 16000k
+ DEVICE_TITLE := MTC Wireless Router WR1201
+ KERNEL_INITRAMFS := $(KERNEL_DTB) | wr1201-factory-header
+ DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
+ kmod-usb-ledtrig-usbport wpad-basic
+endef
+TARGET_DEVICES += mtc_wr1201
+
define Device/re350-v1
DTS := RE350
DEVICE_TITLE := TP-LINK RE350 v1
TPLINK_HEADER_VERSION := 1
IMAGE_SIZE := 6016k
KERNEL := $(KERNEL_DTB) | tplink-v1-header -e -O
- IMAGES := sysupgrade.bin factory.bin
+ IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
endef
TARGET_DEVICES += sk-wb8
+define Device/telco-electronics_x1
+ DTS := Telco-Electronics-X1
+ IMAGE_SIZE := 16064k
+ DEVICE_TITLE := Telco Electronics X1
+ DEVICE_PACKAGES := kmod-usb3 kmod-mt76 wpad-basic
+endef
+TARGET_DEVICES += telco-electronics_x1
+
define Device/timecloud
DTS := Timecloud
DEVICE_TITLE := Thunder Timecloud
endef
TARGET_DEVICES += timecloud
-define Device/u7621-06-256M-16M
- DTS := U7621-06-256M-16M
- IMAGE_SIZE := 16064k
- DEVICE_TITLE := UniElec U7621-06 (256M RAM/16M flash)
- DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3
-endef
-TARGET_DEVICES += u7621-06-256M-16M
-
define Device/ubnt-erx
DTS := UBNT-ERX
FILESYSTEMS := squashfs
KERNEL_SIZE := 3145728
- KERNEL := $(KERNEL_DTB) | uImage lzma
- IMAGES := sysupgrade.tar
KERNEL_INITRAMFS := $$(KERNEL) | ubnt-erx-factory-image $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.tar
- IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_TITLE := Ubiquiti EdgeRouter X
endef
TARGET_DEVICES += ubnt-erx
endef
TARGET_DEVICES += ubnt-erx-sfp
+define Device/unielec_u7621-06-256m-16m
+ DTS := U7621-06-256M-16M
+ IMAGE_SIZE := 16064k
+ DEVICE_TITLE := UniElec U7621-06 (256M RAM/16M flash)
+ DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3
+ SUPPORTED_DEVICES += u7621-06-256M-16M
+endef
+TARGET_DEVICES += unielec_u7621-06-256m-16m
+
+define Device/unielec_u7621-06-512m-64m
+ DTS := U7621-06-512M-64M
+ IMAGE_SIZE := 65216k
+ DEVICE_TITLE := UniElec U7621-06 (512M RAM/64M flash)
+ DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3
+endef
+TARGET_DEVICES += unielec_u7621-06-512m-64m
+
define Device/vr500
DTS := VR500
IMAGE_SIZE := 66453504
define Device/w2914nsv2
DTS := W2914NSV2
IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ UIMAGE_NAME := W2914NS-V2(0.0.0)
DEVICE_TITLE := WeVO W2914NS v2
DEVICE_PACKAGES := \
kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
define Device/wndr3700v5
DTS := WNDR3700V5
- IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ BLOCKSIZE := 64k
+ IMAGE_SIZE := 15232k
+ SERCOMM_HWID := AYB
+ SERCOMM_HWVER := A001
+ SERCOMM_SWVER := 0x1054
+ IMAGES += factory.img
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.img := pad-extra 320k | $$(IMAGE/default) | pad-to $$$$(BLOCKSIZE) | \
+ sercom-footer | pad-to 128 | zip WNDR3700v5.bin | sercom-seal
DEVICE_TITLE := Netgear WNDR3700v5
- DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 wpad-basic
+ DEVICE_PACKAGES := \
+ kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
endef
TARGET_DEVICES += wndr3700v5
endef
TARGET_DEVICES += youhua_wr1200js
+define Device/youku_yk-l2
+ DTS := YOUKU-YK2
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := Youku YK-L2
+ DEVICE_PACKAGES := \
+ kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+endef
+TARGET_DEVICES += youku_yk-l2
+
define Device/wsr-1166
DTS := WSR-1166
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
endef
TARGET_DEVICES += zbt-wg3526-32M
-
-# FIXME: is this still needed?
-define Image/Prepare
-#define Build/Compile
- rm -rf $(KDIR)/relocate
- $(CP) ../../generic/image/relocate $(KDIR)
- $(MAKE) -C $(KDIR)/relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS)
- $(CP) $(KDIR)/relocate/loader.bin $(KDIR)/loader.bin
-endef
projects / openwrt / openwrt.git / blobdiff