ramips: add support for Netgear R6020

[openwrt/openwrt.git] / target / linux / ramips / mt76x8 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index bdb5e5867b86d1a87f670c712e97a01a62a4f712..e3d18b5fba58ede2553fd2a3071d309c188dd04e 100755 (executable)
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -17,6 +17,7 @@ ramips_setup_interfaces()
        ravpower,rp-wd009|\
        tama,w06|\
        tplink,re200-v2|\
+       tplink,re220-v2|\
        tplink,re305-v1|\
        tplink,tl-mr3020-v3|\
        tplink,tl-wr802n-v4|\
@@ -94,6 +95,7 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
                ;;
+       netgear,r6020|\
        netgear,r6080|\
        netgear,r6120)
                ucidef_add_switch "switch0" \
@@ -144,11 +146,13 @@ ramips_setup_macs()
                wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
                lan_mac=$wan_mac
                ;;
-       cudy,wr1000)
+       cudy,wr1000|\
+       wavlink,wl-wn577a2)
                wan_mac=$(mtd_get_mac_binary factory 0x2e)
                label_mac=$(mtd_get_mac_binary factory 0x4)
                ;;
        duzun,dm06|\
+       netgear,r6020|\
        netgear,r6080|\
        netgear,r6120|\
        wrtnode,wrtnode2p|\
@@ -188,10 +192,6 @@ ramips_setup_macs()
        wiznet,wizfi630s)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x28)" 1)
                ;;
-       wavlink,wl-wn577a2)
-               wan_mac=$(mtd_get_mac_binary factory 0x2e)
-               label_mac=$(mtd_get_mac_binary factory 0x4)
-               ;;
        skylab,skw92a|\
        totolink,lr1200)
                wan_mac=$(mtd_get_mac_binary factory 0x2e)