ralink: various i2c fixes
[openwrt/openwrt.git] / target / linux / ramips / patches-3.14 / 0052-i2c-MIPS-adds-ralink-I2C-driver.patch
index 3522bda..a3b0311 100644 (file)
@@ -13,8 +13,10 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
  create mode 100644 drivers/i2c/busses/i2c-ralink.c
 
---- /dev/null
-+++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+Index: linux-3.14.18/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+===================================================================
+--- /dev/null  1970-01-01 00:00:00.000000000 +0000
++++ linux-3.14.18/Documentation/devicetree/bindings/i2c/i2c-ralink.txt 2014-10-06 14:28:14.296590159 +0200
 @@ -0,0 +1,27 @@
 +I2C for Ralink platforms
 +
@@ -43,9 +45,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +              };
 +      };
 +};
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -659,6 +659,10 @@ config I2C_RIIC
+Index: linux-3.14.18/drivers/i2c/busses/Kconfig
+===================================================================
+--- linux-3.14.18.orig/drivers/i2c/busses/Kconfig      2014-09-06 01:34:59.000000000 +0200
++++ linux-3.14.18/drivers/i2c/busses/Kconfig   2014-10-06 14:28:14.296590159 +0200
+@@ -659,6 +659,10 @@
          This driver can also be built as a module.  If so, the module
          will be called i2c-riic.
  
@@ -56,9 +60,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  config HAVE_S3C2410_I2C
        bool
        help
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -63,6 +63,7 @@ obj-$(CONFIG_I2C_PNX)                += i2c-pnx.o
+Index: linux-3.14.18/drivers/i2c/busses/Makefile
+===================================================================
+--- linux-3.14.18.orig/drivers/i2c/busses/Makefile     2014-09-06 01:34:59.000000000 +0200
++++ linux-3.14.18/drivers/i2c/busses/Makefile  2014-10-06 14:28:14.296590159 +0200
+@@ -63,6 +63,7 @@
  obj-$(CONFIG_I2C_PUV3)                += i2c-puv3.o
  obj-$(CONFIG_I2C_PXA)         += i2c-pxa.o
  obj-$(CONFIG_I2C_PXA_PCI)     += i2c-pxa-pci.o
@@ -66,14 +72,19 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  obj-$(CONFIG_I2C_RIIC)                += i2c-riic.o
  obj-$(CONFIG_I2C_S3C2410)     += i2c-s3c2410.o
  obj-$(CONFIG_I2C_S6000)               += i2c-s6000.o
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-ralink.c
-@@ -0,0 +1,271 @@
+Index: linux-3.14.18/drivers/i2c/busses/i2c-ralink.c
+===================================================================
+--- /dev/null  1970-01-01 00:00:00.000000000 +0000
++++ linux-3.14.18/drivers/i2c/busses/i2c-ralink.c      2014-10-06 15:53:32.416500362 +0200
+@@ -0,0 +1,298 @@
 +/*
 + * drivers/i2c/busses/i2c-ralink.c
 + *
 + * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
 + *
++ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
++ * (C) 2014 Sittisak <sittisaks@hotmail.com>
++ *
 + * This software is licensed under the terms of the GNU General Public
 + * License version 2, as published by the Free Software Foundation, and
 + * may be copied, distributed, and modified under those terms.
@@ -96,6 +107,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#include <linux/platform_device.h>
 +#include <linux/i2c.h>
 +#include <linux/io.h>
++#include <linux/of_i2c.h>
 +#include <linux/err.h>
 +
 +#include <asm/mach-ralink/ralink_regs.h>
@@ -119,7 +131,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#define I2C_DEVADLEN_7                (6 << 2)
 +#define I2C_ADDRDIS           BIT(1)
 +
-+#define I2C_RETRY             0x400
++#define I2C_RETRY             0x1000
 +
 +#define CLKDIV_VALUE          200 // clock rate is 40M, 40M / (200*2) = 100k (standard i2c bus rate).
 +//#define CLKDIV_VALUE                50 // clock rate is 40M, 40M / (50*2) = 400k (fast i2c bus rate).
@@ -141,6 +153,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +      return ioread32(membase + reg);
 +}
 +
++static inline int rt_i2c_get_ack(void)
++{
++        return (rt_i2c_r32(REG_STATUS_REG) & I2C_ACKERR) ? -EIO : 0;
++}
++
 +static inline int rt_i2c_wait_rx_done(void)
 +{
 +      int retries = I2C_RETRY;
@@ -150,7 +167,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +                      break;
 +      } while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_DATARDY));
 +
-+      return (retries < 0);
++      return (retries < 0) ? -ETIMEDOUT : 0;
 +}
 +
 +static inline int rt_i2c_wait_idle(void)
@@ -174,7 +191,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +                      break;
 +      } while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_SDOEMPTY));
 +
-+      return (retries < 0);
++      return (retries < 0) ? -ETIMEDOUT : 0;
 +}
 +
 +static int rt_i2c_handle_msg(struct i2c_adapter *a, struct i2c_msg* msg)
@@ -182,7 +199,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +      int i = 0, j = 0, pos = 0;
 +      int nblock = msg->len / READ_BLOCK;
 +        int rem = msg->len % READ_BLOCK;
-+
++      int ret = 0;
++      /*printk("i2c handle msg len:%d\n",msg->len);*/
 +      if (msg->flags & I2C_M_TEN) {
 +              printk("10 bits addr not supported\n");
 +              return -EINVAL;
@@ -190,36 +208,51 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 +      if (msg->flags & I2C_M_RD) {
 +              for (i = 0; i < nblock; i++) {
-+                      rt_i2c_wait_idle();
++                      if (rt_i2c_wait_idle()) {
++                                  printk("i2c-read line busy\n");
++                          return -ETIMEDOUT;
++                      }
 +                      rt_i2c_w32(READ_BLOCK - 1, REG_BYTECNT_REG);
 +                      rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
 +                      for (j = 0; j < READ_BLOCK; j++) {
-+                              if (rt_i2c_wait_rx_done())
-+                                      return -1;
++                              if (rt_i2c_wait_rx_done()<0) ret = rt_i2c_wait_rx_done();
++                                if (rt_i2c_get_ack()<0)      ret = rt_i2c_get_ack();
 +                              msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
 +                      }
 +              }
 +
-+              rt_i2c_wait_idle();
++              if (rt_i2c_wait_idle()) {
++                      printk("i2c-read line busy\n");
++                      return -ETIMEDOUT;
++              }
++              if (rem){
 +              rt_i2c_w32(rem - 1, REG_BYTECNT_REG);
 +              rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
++              }
 +              for (i = 0; i < rem; i++) {
-+                      if (rt_i2c_wait_rx_done())
-+                              return -1;
++                      if (rt_i2c_wait_rx_done()<0) ret = rt_i2c_wait_rx_done();
++                        if (rt_i2c_get_ack()     <0) ret = rt_i2c_get_ack();
++
 +                      msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
 +              }
 +      } else {
-+              rt_i2c_wait_idle();
++              if (rt_i2c_wait_idle()) {
++                      printk("i2c-write line busy\n");
++                      return -ETIMEDOUT;
++              }
 +              rt_i2c_w32(msg->len - 1, REG_BYTECNT_REG);
 +              for (i = 0; i < msg->len; i++) {
 +                      rt_i2c_w32(msg->buf[i], REG_DATAOUT_REG);
 +                      rt_i2c_w32(WRITE_CMD, REG_STARTXFR_REG);
-+                      if (rt_i2c_wait_tx_done())
-+                              return -1;
++
++                      if (rt_i2c_wait_tx_done()<0) ret = rt_i2c_wait_tx_done();
++                        if (rt_i2c_get_ack()<0)      ret = rt_i2c_get_ack();
++
++
 +              }
 +      }
 +
-+      return 0;
++      return ret;
 +}
 +
 +static int rt_i2c_master_xfer(struct i2c_adapter *a, struct i2c_msg *m, int n)
@@ -228,8 +261,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +      int ret = 0;
 +
 +      if (rt_i2c_wait_idle()) {
-+              printk("i2c transfer failed\n");
-+              return 0;
++              printk("i2c-master_xfer line busy\n");
++              return -ETIMEDOUT;
 +      }
 +
 +      device_reset(a->dev.parent);
@@ -238,12 +271,12 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +      rt_i2c_w32(I2C_DEVADLEN_7 | I2C_ADDRDIS, REG_CONFIG_REG);
 +      rt_i2c_w32(CLKDIV_VALUE, REG_CLKDIV_REG);
 +
-+      for (i = 0; i < n && !ret; i++)
++      for (i = 0; i < n && !ret; i++) {
 +              ret = rt_i2c_handle_msg(a, &m[i]);
 +
-+      if (ret) {
-+              printk("i2c transfer failed\n");
-+              return 0;
++              if (ret < 0) {
++                      return ret;
++              }
 +      }
 +
 +      return n;
@@ -292,6 +325,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +      if (ret)
 +              return ret;
 +
++      of_i2c_register_devices(adapter);
++
 +      platform_set_drvdata(pdev, adapter);
 +
 +      dev_info(&pdev->dev, "loaded\n");