ramips: add support for Loewe WMDR-143N

[openwrt/openwrt.git] / target / linux / ramips / rt288x / config-4.4

diff --git a/target/linux/ramips/rt288x/config-4.4 b/target/linux/ramips/rt288x/config-4.4
index 94e4cdde5376ac4fe503687ee91b26402d5f5fe6..3690a4780683d8d2fdef946ba57cb8ef1267f9cf 100644 (file)
--- a/target/linux/ramips/rt288x/config-4.4
+++ b/target/linux/ramips/rt288x/config-4.4
@@ -119,8 +119,8 @@ CONFIG_MIPS_CMDLINE_FROM_DTB=y
 CONFIG_MIPS_L1_CACHE_SHIFT=4
 CONFIG_MIPS_L1_CACHE_SHIFT_4=y
 # CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_NO_APPENDED_DTB=y
-# CONFIG_MIPS_RAW_APPENDED_DTB is not set
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
 CONFIG_MIPS_SPRAM=y
 CONFIG_MODULES_USE_ELF_REL=y
 # CONFIG_MTD_CFI_INTELEXT is not set
@@ -141,6 +141,7 @@ CONFIG_NET_VENDOR_MEDIATEK=y
 # CONFIG_NO_IOPORT_MAP is not set
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
 CONFIG_OF_EARLY_FLATTREE=y
 CONFIG_OF_FLATTREE=y
 CONFIG_OF_GPIO=y
@@ -148,7 +149,10 @@ CONFIG_OF_IRQ=y
 CONFIG_OF_MDIO=y
 CONFIG_OF_MTD=y
 CONFIG_OF_NET=y
-# CONFIG_PCI is not set
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PGTABLE_LEVELS=2
 CONFIG_PHYLIB=y
@@ -160,7 +164,6 @@ CONFIG_RALINK=y
 CONFIG_RALINK_WDT=y
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RESET_CONTROLLER=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set
@@ -186,6 +189,14 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_MIPS16=y
 CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_USB=m
+CONFIG_USB_COMMON=m
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_HCD_PLATFORM=m
+CONFIG_USB_EHCI_PCI=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PCI=m
+CONFIG_USB_OHCI_HCD_PLATFORM=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USE_OF=y
 CONFIG_WATCHDOG_CORE=y