export PATH=$(TARGET_PATH):/sbin
+GRUB2_MODULES = biosdisk boot chain configfile ext2 linux ls part_msdos reboot serial vga
+GRUB2_MODULES_ISO = biosdisk boot chain configfile iso9660 linux ls part_msdos reboot serial vga
GRUB_TERMINALS =
GRUB_SERIAL_CONFIG =
GRUB_TERMINAL_CONFIG =
GRUB_CONSOLE_CMDLINE =
+GRUB_ROOT = hd0,msdos1
-ifneq ($(CONFIG_X86_GRUB_CONSOLE),)
+USE_ATKBD = generic 64
+
+ifneq ($(strip $(foreach subtarget,$(USE_ATKBD),$(CONFIG_TARGET_x86_$(subtarget)))),)
+ GRUB2_MODULES += at_keyboard
+ GRUB2_MODULES_ISO += at_keyboard
+endif
+
+ifneq ($(CONFIG_GRUB_CONSOLE),)
GRUB_CONSOLE_CMDLINE += console=tty0
GRUB_TERMINALS += console
endif
-ifneq ($(CONFIG_X86_GRUB_SERIAL),)
- GRUB_CONSOLE_CMDLINE += console=$(call qstrip,$(CONFIG_X86_GRUB_SERIAL)),$(CONFIG_X86_GRUB_BAUDRATE)n8
- GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_X86_GRUB_BAUDRATE) --word=8 --parity=no --stop=1
+GRUB_SERIAL:=$(call qstrip,$(CONFIG_GRUB_SERIAL))
+
+ifneq ($(GRUB_SERIAL),)
+ GRUB_CONSOLE_CMDLINE += console=$(GRUB_SERIAL),$(CONFIG_GRUB_BAUDRATE)n8$(if $(CONFIG_GRUB_FLOWCONTROL),r,)
+ GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_GRUB_BAUDRATE) --word=8 --parity=no --stop=1 --rtscts=$(if $(CONFIG_GRUB_FLOWCONTROL),on,off)
GRUB_TERMINALS += serial
endif
ifneq ($(GRUB_TERMINALS),)
- GRUB_TERMINAL_CONFIG := terminal --timeout=2 $(GRUB_TERMINALS)
+ GRUB_TERMINAL_CONFIG := terminal_input $(GRUB_TERMINALS); terminal_output $(GRUB_TERMINALS)
endif
+SIGNATURE:=$(shell perl -e 'printf("%08x", rand(0xFFFFFFFF))')
ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
+ROOTPART:=$(if $(ROOTPART),$(ROOTPART),PARTUUID=$(SIGNATURE)-02)
+
+GRUB_TIMEOUT:=$(call qstrip,$(CONFIG_GRUB_TIMEOUT))
+GRUB_TITLE:=$(call qstrip,$(CONFIG_GRUB_TITLE))
-GRUB_TIMEOUT:=$(call qstrip,$(CONFIG_X86_GRUB_TIMEOUT))
+ifneq ($(CONFIG_TARGET_x86_xen_domu),)
+ GRUB_ROOT = xen/xvda,msdos1
+endif
-ifneq ($(CONFIG_X86_GRUB_IMAGES),)
+ifneq ($(CONFIG_GRUB_IMAGES),)
- BOOTOPTS:=$(call qstrip,$(CONFIG_X86_GRUB_BOOTOPTS))
+ BOOTOPTS:=$(call qstrip,$(CONFIG_GRUB_BOOTOPTS))
define Image/cmdline/ext4
root=$(ROOTPART) rootfstype=ext4 rootwait
endef
-
- define Image/cmdline/jffs2-64k
- block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootwait
- endef
-
- define Image/cmdline/jffs2-128k
- block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootwait
- endef
define Image/cmdline/squashfs
- block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs rootwait
+ root=$(ROOTPART) rootfstype=squashfs rootwait
endef
- define Image/Build/grub
+ define Image/Build/grub2
# left here because the image builder doesnt need these
- $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub
- $(CP) \
- $(KDIR)/stage1 \
- $(KDIR)/stage2 \
- $(KDIR)/e2fs_stage1_5 \
- $(KDIR)/root.grub/boot/grub/
+ $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub $(KDIR)/grub2
$(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
+ grub-mkimage \
+ -p /boot/grub \
+ -d $(STAGING_DIR_HOST)/lib/grub/i386-pc \
+ -o $(KDIR)/grub2/core.img \
+ -O i386-pc \
+ -c ./grub-early.cfg \
+ $(GRUB2_MODULES)
+ $(CP) $(STAGING_DIR_HOST)/lib/grub/i386-pc/*.img $(KDIR)/grub2/
+ echo '(hd0) $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img' > $(KDIR)/grub2/device.map
sed \
-e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
-e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
-e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
-e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
- ./menu.lst > $(KDIR)/root.grub/boot/grub/menu.lst
- PADDING="$(CONFIG_TARGET_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_x86.sh \
+ -e 's#@ROOT@#$(GRUB_ROOT)#g' \
+ -e 's#@TITLE@#$(GRUB_TITLE)#g' \
+ ./grub.cfg > $(KDIR)/root.grub/boot/grub/grub.cfg
+ PADDING="$(CONFIG_TARGET_IMAGES_PAD)" SIGNATURE="$(SIGNATURE)" PATH="$(TARGET_PATH)" $(SCRIPT_DIR)/gen_image_generic.sh \
$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
$(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.grub \
- $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1)
- $(call Image/Build/grub/$(1))
- endef
-
- define Image/Prepare/grub
- # for the image builder
- $(CP) \
- $(STAGING_DIR)/usr/lib/grub/i386-openwrt/stage1 \
- $(STAGING_DIR)/usr/lib/grub/i386-openwrt/stage2 \
- $(STAGING_DIR)/usr/lib/grub/i386-openwrt/stage2_eltorito \
- $(STAGING_DIR)/usr/lib/grub/i386-openwrt/e2fs_stage1_5 \
- $(KDIR)/
- endef
-
-endif
-
-ROOTDELAY=10
-
-ifneq ($(CONFIG_OLPC_BOOTSCRIPT_IMAGES),)
-
- define Image/cmdline/ext4
- root=$(ROOTPART) rootfstype=ext4 rootwait
- endef
-
- define Image/cmdline/jffs2-64k
- block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootdelay=$(ROOTDELAY)
- endef
-
- define Image/cmdline/jffs2-128k
- block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootdelay=$(ROOTDELAY)
+ $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1) \
+ 256
+ grub-bios-setup \
+ --device-map="$(KDIR)/grub2/device.map" \
+ -d "$(KDIR)/grub2" \
+ -r "hd0,msdos1" \
+ "$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img"
endef
-
- define Image/cmdline/squashfs
- block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs rootdelay=$(ROOTDELAY)
- endef
-
- define Image/Build/bootscript
- # left here because the image builder doesnt need these
- $(INSTALL_DIR) $(KDIR)/root.bootscript/boot
- $(CP) $(KDIR)/bzImage $(KDIR)/root.bootscript/boot/vmlinuz
- sed -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
- ./olpc.fth > $(KDIR)/root.bootscript/boot/olpc.fth
- PADDING="$(CONFIG_TARGET_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_olpc.sh \
- $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
- $(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.bootscript \
- $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1)
- endef
-
endif
define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+ dd if=/dev/zero bs=128k count=1 >> $(KDIR)/root.squashfs
endef
-define Image/Build/iso
- $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub
- $(CP) \
- $(KDIR)/stage2_eltorito \
- $(KDIR)/root.grub/boot/grub/
+define Image/Build/iso
+ $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub $(KDIR)/grub2
+ $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
+ grub-mkimage \
+ -p /boot/grub \
+ -d $(STAGING_DIR_HOST)/lib/grub/i386-pc \
+ -o $(KDIR)/grub2/eltorito.img \
+ -O i386-pc \
+ -c ./grub-early.cfg \
+ $(GRUB2_MODULES_ISO)
+ cat \
+ $(STAGING_DIR_HOST)/lib/grub/i386-pc/cdboot.img \
+ $(KDIR)/grub2/eltorito.img \
+ > $(KDIR)/root.grub/boot/grub/eltorito.img
sed \
-e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
-e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
- -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
- -e 's#(hd0,0)#(cd)#g' \
- ./menu.lst > $(KDIR)/root.grub/boot/grub/menu.lst
- $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
- mkisofs -R -b boot/grub/stage2_eltorito -no-emul-boot -boot-load-size 4 -boot-info-table \
- -o $(KDIR)/root.iso $(KDIR)/root.grub
-endef
-
-ifneq ($(CONFIG_X86_VDI_IMAGES),)
+ -e 's#@CMDLINE@#root=/dev/sr0 rootfstype=iso9660 rootwait $(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
+ -e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
+ -e 's#@TITLE@#$(GRUB_TITLE)#g' \
+ ./grub-iso.cfg > $(KDIR)/root.grub/boot/grub/grub.cfg
+ mkisofs -R -b boot/grub/eltorito.img -no-emul-boot -boot-info-table \
+ -o $(KDIR)/root.iso $(KDIR)/root.grub $(TARGET_DIR)
+endef
+
+ifneq ($(CONFIG_VDI_IMAGES),)
define Image/Build/vdi
- # left here because the image builder doesnt need these
- ifeq ($(1),ext4)
- rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi || true
- qemu-img convert -f raw -O vdi \
- $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
- $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
- # XXX: VBoxManage insists on setting perms to 0600
- chmod 0644 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
- endif
+ rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi || true
+ qemu-img convert -f raw -O vdi \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
+ # XXX: VBoxManage insists on setting perms to 0600
+ chmod 0644 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
endef
endif
-ifneq ($(CONFIG_X86_VMDK_IMAGES),)
+ifneq ($(CONFIG_VMDK_IMAGES),)
define Image/Build/vmdk
- # left here because the image builder doesnt need these
- ifeq ($(1),ext4)
- rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk || true
- qemu-img convert -f raw -O vmdk \
- $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
- $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk
- endif
+ rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk || true
+ qemu-img convert -f raw -O vmdk \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk
endef
endif
define Image/Build/gzip
- gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img
- gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
+ gzip -f9n $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img
+ gzip -f9n $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
endef
ifneq ($(CONFIG_TARGET_IMAGES_GZIP),)
define Image/Build/gzip/ext4
$(call Image/Build/gzip,ext4)
endef
- ifneq ($(CONFIG_TARGET_IMAGES_PAD),)
- define Image/Build/gzip/squashfs
+ define Image/Build/gzip/squashfs
$(call Image/Build/gzip,squashfs)
- endef
- define Image/Build/gzip/jffs2-64k
- $(call Image/Build/gzip,jffs2-64k)
- endef
- define Image/Build/gzip/jffs2-128k
- $(call Image/Build/gzip,jffs2-128k)
- endef
- endif
+ endef
endif
define Image/BuildKernel
$(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
- ifneq ($(CONFIG_X86_ETHERBOOT_IMAGES),)
- rm -f $(BIN_DIR)/$(IMG_PREFIX)-etherboot
- $(STAGING_DIR_HOST)/bin/mkelfImage \
- --append=$(CONFIG_X86_ETHERBOOT_BOOTOPTS) \
- $(KDIR)/bzImage \
- $(BIN_DIR)/$(IMG_PREFIX)-etherboot
- endif
endef
define Image/Prepare
- $(CP) $(LINUX_DIR)/arch/x86/boot/bzImage $(KDIR)/bzImage
- $(call Image/Prepare/bootscript)
- $(call Image/Prepare/grub)
+ $(call Image/Prepare/grub2)
+endef
+
+define Image/Build/Initramfs
+ $(CP) $(KDIR)/bzImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-ramfs.bzImage
endef
define Image/Build
$(call Image/Build/$(1))
- $(call Image/Build/bootscript,$(1))
ifneq ($(1),iso)
- $(call Image/Build/grub,$(1))
+ $(call Image/Build/grub2,$(1))
$(call Image/Build/vdi,$(1))
$(call Image/Build/vmdk,$(1))
- endif
$(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
+ else
+ $(CP) $(KDIR)/root.iso $(BIN_DIR)/$(IMG_PREFIX).iso
+ endif
$(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
$(call Image/Build/gzip/$(1))
+ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+ $(call Image/Build/Initramfs)
+endif
endef
$(eval $(call BuildImage))
projects / openwrt / openwrt.git / blobdiff