X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=README;h=55ca92af65f8f591ff528bf86c4b5133825ebc07;hp=2bba6fa6f6c8190e659145770d3d5cfeb01b45b9;hb=d020ae79ab65a291e53a52a94985b4ab42a30541;hpb=60c1f0f64d23003a19a07d6b9638542130f6641d

diff --git a/README b/README
index 2bba6fa6f6..55ca92af65 100644
--- a/README
+++ b/README
@@ -1,24 +1,34 @@
-This is the buildsystem for the OpenWrt Linux distribution
+  _______                     ________        __
+ |       |.-----.-----.-----.|  |  |  |.----.|  |_
+ |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
+ |_______||   __|_____|__|__||________||__|  |____|
+          |__| W I R E L E S S   F R E E D O M
+ -----------------------------------------------------
 
-Please use "make menuconfig" to configure your appreciated
-configuration for the toolchain and firmware.
+This is the buildsystem for the OpenWrt Linux distribution.
 
-You need to have installed gcc, binutils, patch, bzip2, flex, bison,
-make, gettext, pkg-config, unzip, libz-dev and libc headers.
+To build your own firmware you need a Linux, BSD or MacOSX system (case
+sensitive filesystem required). Cygwin is unsupported because of the lack
+of a case sensitive file system.
 
-Simply running 'make' will build your firmware.
-It will download all sources, build the cross-compile toolchain, 
-the kernel and all choosen applications.
+You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
+unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
 
-You can use scripts/flash.sh for remotely updating your embedded system
-via tftp.
+1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
+defined in feeds.conf / feeds.conf.default
 
-The buildroot system is documented in docs/buildroot-documentation.html.
+2. Run "./scripts/feeds install -a" to install symlinks for all obtained
+packages into package/feeds/
 
-Building your own firmware you need to have access to a Linux system.
+3. Run "make menuconfig" to select your preferred configuration for the
+toolchain, target system & firmware packages.
+
+4. Run "make" to build your firmware. This will download all sources, build
+the cross-compile toolchain and then cross-compile the Linux kernel & all
+chosen applications for your target system.
 
 Sunshine!
-	Your OpenWrt Project
-	http://openwrt.org
+	Your OpenWrt Community
+	http://www.openwrt.org