X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=README;h=55ca92af65f8f591ff528bf86c4b5133825ebc07;hp=6d2b27fb3e8a5660344f4232c78dcd96e9a7cd3f;hb=22fdaa06b7c9c5cd75de7a05152691016f5c2c39;hpb=4828e8ff2315da37b2c05ed8598587c2e5684f1f

diff --git a/README b/README
index 6d2b27fb3e..55ca92af65 100644
--- a/README
+++ b/README
@@ -1,34 +1,34 @@
-This is the buildsystem for the OpenWrt Linux distribution.
-
-Please use "make menuconfig" to configure your appreciated
-configuration for the toolchain and firmware.
+  _______                     ________        __
+ |       |.-----.-----.-----.|  |  |  |.----.|  |_
+ |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
+ |_______||   __|_____|__|__||________||__|  |____|
+          |__| W I R E L E S S   F R E E D O M
+ -----------------------------------------------------
 
-You need to have installed gcc, binutils, patch, bzip2, flex,
-make, gettext, pkg-config, unzip, libz-dev and libc headers.
-
-Run "./scripts/feeds update" to get the latest package definitions
-defined in feeds.conf / feeds.conf.default respectively
-and "./scripts/feeds install" to install symlinks into "package/feeds/*".
+This is the buildsystem for the OpenWrt Linux distribution.
 
-Use "make menuconfig" to configure your image.
+To build your own firmware you need a Linux, BSD or MacOSX system (case
+sensitive filesystem required). Cygwin is unsupported because of the lack
+of a case sensitive file system.
 
-Simply running "make" will build your firmware.
-It will download all sources, build the cross-compile toolchain, 
-the kernel and all choosen applications.
+You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
+unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
 
-You can use "scripts/flashing/flash.sh" for remotely updating your embedded
-system via tftp.
+1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
+defined in feeds.conf / feeds.conf.default
 
-The OpenWrt system is documented in docs/. You will need a LaTeX distribution
-and the tex4ht package to build the documentation. Type "make -C docs/" to build it.
+2. Run "./scripts/feeds install -a" to install symlinks for all obtained
+packages into package/feeds/
 
-To build your own firmware you need to have access to a Linux, BSD or MacOSX system
-(case-sensitive filesystem required). Cygwin will not be supported because of
-the lack of case sensitiveness in the file system.
+3. Run "make menuconfig" to select your preferred configuration for the
+toolchain, target system & firmware packages.
 
+4. Run "make" to build your firmware. This will download all sources, build
+the cross-compile toolchain and then cross-compile the Linux kernel & all
+chosen applications for your target system.
 
 Sunshine!
-	Your OpenWrt Project
-	http://openwrt.org
+	Your OpenWrt Community
+	http://www.openwrt.org