X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=package%2Fbase-files%2Ffiles%2Fbin%2Fconfig_generate;h=a8311fc595babdfeddd6d84ecf21799d0bd4c9f2;hp=9a3b30065d8a2b36aa0be3f21d9b517fe6878a08;hb=7f1359c14e60009a511f74a2f62d34b96deba417;hpb=c118e5edf4301dc303024603dd34d369d9926d6d

diff --git a/package/base-files/files/bin/config_generate b/package/base-files/files/bin/config_generate
index 9a3b30065d..a8311fc595 100755
--- a/package/base-files/files/bin/config_generate
+++ b/package/base-files/files/bin/config_generate
@@ -4,170 +4,431 @@ CFG=/etc/board.json
 
 . /usr/share/libubox/jshn.sh
 
-[ -f $CFG ] || exit 1
+[ -s $CFG ] || /bin/board_detect || exit 1
+[ -s /etc/config/network -a -s /etc/config/system ] && exit 0
 
 generate_static_network() {
-	uci -q batch <<EOF
-delete network.loopback
-set network.loopback='interface'
-set network.loopback.ifname='lo'
-set network.loopback.proto='static'
-set network.loopback.ipaddr='127.0.0.1'
-set network.loopback.netmask='255.0.0.0'
-delete network.globals
-set network.globals='globals'
-set network.globals.ula_prefix='auto'
-EOF
+	uci -q batch <<-EOF
+		delete network.loopback
+		set network.loopback='interface'
+		set network.loopback.ifname='lo'
+		set network.loopback.proto='static'
+		set network.loopback.ipaddr='127.0.0.1'
+		set network.loopback.netmask='255.0.0.0'
+		delete network.globals
+		set network.globals='globals'
+		set network.globals.ula_prefix='auto'
+	EOF
+
+	if json_is_a dsl object; then
+		json_select dsl
+			if json_is_a atmbridge object; then
+				json_select atmbridge
+					local vpi vci encaps payload
+					json_get_vars vpi vci encaps payload
+					uci -q batch <<-EOF
+						delete network.atm
+						set network.atm='atm-bridge'
+						set network.atm.vpi='$vpi'
+						set network.atm.vci='$vci'
+						set network.atm.encaps='$encaps'
+						set network.atm.payload='$payload'
+					EOF
+				json_select ..
+			fi
+
+			if json_is_a modem object; then
+				json_select modem
+					local type annex firmware tone xfer_mode
+					json_get_vars type annex firmware tone xfer_mode
+					uci -q batch <<-EOF
+						delete network.dsl
+						set network.dsl='dsl'
+						set network.dsl.annex='$annex'
+						set network.dsl.firmware='$firmware'
+						set network.dsl.tone='$tone'
+						set network.dsl.xfer_mode='$xfer_mode'
+					EOF
+				json_select ..
+			fi
+		json_select ..
+	fi
 }
 
-next_vlan=3
+addr_offset=2
 generate_network() {
-	local vlan
+	local ifname macaddr protocol type ipaddr netmask
 
 	json_select network
-	json_select $1
-	json_get_vars ifname create_vlan macaddr
-	json_select ..
+		json_select "$1"
+			json_get_vars ifname macaddr protocol ipaddr netmask
+		json_select ..
 	json_select ..
 
 	[ -n "$ifname" ] || return
-	[ "$create_vlan" -eq 1 ] && case $1 in
-	lan) vlan=1;;
-	wan) vlan=2;;
-	*)
-		vlan=$next_vlan
-		next_vlan=$((next_vlan + 1))
-		;;
+
+	# force bridge for multi-interface devices (and lan)
+	case "$1:$ifname" in
+		*\ * | lan:*) type="bridge" ;;
 	esac
-	[ -n "$vlan" ] && ifname=${ifname}.${vlan}
-	uci -q batch <<EOF
-delete network.$1
-set network.$1='interface'
-set network.$1.ifname='$ifname'
-set network.$1.force_link=1
-set network.$1.proto='none'
-set network.$1.macaddr='$macaddr'
-EOF
-
-	case $1 in
-	lan) uci -q batch <<EOF
-set network.$1.type='bridge'
-set network.$1.proto='static'
-set network.$1.ipaddr='192.168.1.1'
-set network.$1.netmask='255.255.255.0'
-set network.$1.ip6assign='60'
-EOF
+
+	uci -q batch <<-EOF
+		delete network.$1
+		set network.$1='interface'
+		set network.$1.type='$type'
+		set network.$1.ifname='$ifname'
+		set network.$1.proto='none'
+	EOF
+
+	[ -n "$macaddr" ] && uci -q batch <<-EOF
+		delete network.$1_dev
+		set network.$1_dev='device'
+		set network.$1_dev.name='$ifname'
+		set network.$1_dev.macaddr='$macaddr'
+	EOF
+
+	case "$protocol" in
+		static)
+			local ipad
+			case "$1" in
+				lan) ipad=${ipaddr:-"192.168.1.1"} ;;
+				*) ipad=${ipaddr:-"192.168.$((addr_offset++)).1"} ;;
+			esac
+
+			netm=${netmask:-"255.255.255.0"}
+
+			uci -q batch <<-EOF
+				set network.$1.proto='static'
+				set network.$1.ipaddr='$ipad'
+				set network.$1.netmask='$netm'
+				set network.$1.ip6assign='60'
+			EOF
+		;;
+
+		dhcp)
+			# fixup IPv6 slave interface if parent is a bridge
+			[ "$type" = "bridge" ] && ifname="br-$1"
+
+			uci -q batch <<-EOF
+				set network.$1.proto='dhcp'
+				delete network.${1}6
+				set network.${1}6='interface'
+				set network.${1}6.ifname='$ifname'
+				set network.${1}6.proto='dhcpv6'
+			EOF
 		;;
-	wan) uci -q batch <<EOF
-set network.$1.proto='dhcp'
-delete network.wan6
-set network.wan6='interface'
-set network.wan6.ifname='$ifname'
-set network.wan6.proto='dhcpv6'
-EOF
+
+		pppoe)
+			uci -q batch <<-EOF
+				set network.$1.proto='pppoe'
+				set network.$1.username='username'
+				set network.$1.password='password'
+				set network.$1.ipv6='1'
+				delete network.${1}6
+				set network.${1}6='interface'
+				set network.${1}6.ifname='@${1}'
+				set network.${1}6.proto='dhcpv6'
+			EOF
 		;;
 	esac
 }
 
-generate_switch_vlan() {
-	local device=$1
-	local vlan=$2
-	local cpu_port=$3
+generate_switch_vlans_ports() {
+	local switch="$1"
+	local port ports role roles num attr val
 
-	case $vlan in
-	lan)	vlan=1;;
-	wan)	vlan=2;;
-	*)	vlan=${vlan##vlan};;
-	esac
+	#
+	# autogenerate vlans
+	#
 
-	json_select vlans
-	json_select $2
-	json_get_values ports
-	json_select ..
-	json_select ..
+	if json_is_a roles array; then
+		json_get_keys roles roles
+		json_select roles
+
+		for role in $roles; do
+			json_select "$role"
+				json_get_vars ports
+			json_select ..
+
+			uci -q batch <<-EOF
+				add network switch_vlan
+				set network.@switch_vlan[-1].device='$switch'
+				set network.@switch_vlan[-1].vlan='$role'
+				set network.@switch_vlan[-1].ports='$ports'
+			EOF
+		done
+
+		json_select ..
+	fi
+
+
+	#
+	# write port specific settings
+	#
+
+	if json_is_a ports array; then
+		json_get_keys ports ports
+		json_select ports
+
+		for port in $ports; do
+			json_select "$port"
+				json_get_vars num
 
-	uci -q batch <<EOF
-add network switch_vlan
-set network.@switch_vlan[-1].device='$device'
-set network.@switch_vlan[-1].vlan='$vlan'
-set network.@switch_vlan[-1].ports='$ports ${cpu_port}t'
-EOF
+				if json_is_a attr object; then
+					json_get_keys attr attr
+					json_select attr
+						uci -q batch <<-EOF
+							add network switch_port
+							set network.@switch_port[-1].device='$switch'
+							set network.@switch_port[-1].port=$num
+						EOF
+
+						for attr in $attr; do
+							json_get_var val "$attr"
+							uci -q set network.@switch_port[-1].$attr="$val"
+						done
+					json_select ..
+				fi
+			json_select ..
+		done
+
+		json_select ..
+	fi
 }
 
 generate_switch() {
-	local key=$1
+	local key="$1"
 	local vlans
 
 	json_select switch
-	json_select $key
+	json_select "$key"
 	json_get_vars enable reset blinkrate cpu_port
 
-	[ -n "$cpu_port" ] || return
+	uci -q batch <<-EOF
+		add network switch
+		set network.@switch[-1].name='$key'
+		set network.@switch[-1].reset='$reset'
+		set network.@switch[-1].enable_vlan='$enable'
+		set network.@switch[-1].blinkrate='$blinkrate'
+	EOF
 
-	uci -q batch <<EOF
-add network switch
-set network.@switch[-1].name='$key'
-set network.@switch[-1].reset='$reset'
-set network.@switch[-1].enable_vlan='$enable'
-set network.@switch[-1].blinkrate='$blinkrate'
-EOF
+	generate_switch_vlans_ports "$1"
 
-	json_get_keys vlans vlans
-	for vlan in $vlans; do generate_switch_vlan $1 $vlan $cpu_port; done
 	json_select ..
 	json_select ..
 }
 
+
+generate_static_system() {
+	uci -q batch <<-EOF
+		delete system.@system[0]
+		add system system
+		set system.@system[-1].hostname='LEDE'
+		set system.@system[-1].timezone='UTC'
+		set system.@system[-1].ttylogin='0'
+		set system.@system[-1].log_size='64'
+		set system.@system[-1].urandom_seed='0'
+
+		delete system.ntp
+		set system.ntp='timeserver'
+		set system.ntp.enabled='1'
+		set system.ntp.enable_server='0'
+		add_list system.ntp.server='0.lede.pool.ntp.org'
+		add_list system.ntp.server='1.lede.pool.ntp.org'
+		add_list system.ntp.server='2.lede.pool.ntp.org'
+		add_list system.ntp.server='3.lede.pool.ntp.org'
+	EOF
+
+	if json_is_a system object; then
+		json_select system
+			local hostname
+			if json_get_var hostname hostname; then
+				uci -q set "system.@system[-1].hostname=$hostname"
+			fi
+
+			if json_is_a ntpserver array; then
+				local keys key
+				json_get_keys keys ntpserver
+				json_select ntpserver
+					uci -q delete "system.ntp.server"
+
+					for key in $keys; do
+						local server
+						if json_get_var server "$key"; then
+							uci -q add_list "system.ntp.server=$server"
+						fi
+					done
+				json_select ..
+			fi
+		json_select ..
+	fi
+}
+
+generate_rssimon() {
+	local key="$1"
+	local cfg="rssid_$key"
+	local refresh threshold
+
+	json_select rssimon
+	json_select "$key"
+	json_get_vars refresh threshold
+	json_select ..
+	json_select ..
+
+	uci -q batch <<-EOF
+		delete system.$cfg
+		set system.$cfg='rssid'
+		set system.$cfg.dev='$key'
+		set system.$cfg.refresh='$refresh'
+		set system.$cfg.threshold='$threshold'
+	EOF
+}
+
 generate_led() {
-	local key=$1
+	local key="$1"
 	local cfg="led_$key"
 
 	json_select led
-	json_select $key
-	json_get_vars name sysfs type trigger device interface default
+	json_select "$key"
+	json_get_vars name sysfs type trigger default
+
+	uci -q batch <<-EOF
+		delete system.$cfg
+		set system.$cfg='led'
+		set system.$cfg.name='$name'
+		set system.$cfg.sysfs='$sysfs'
+		set system.$cfg.trigger='$trigger'
+		set system.$cfg.default='$default'
+	EOF
+
+	case "$type" in
+		gpio)
+			local gpio inverted
+			json_get_vars gpio inverted
+			uci -q batch <<-EOF
+				set system.$cfg.trigger='gpio'
+				set system.$cfg.gpio='$gpio'
+				set system.$cfg.inverted='$inverted'
+			EOF
+		;;
+
+		netdev)
+			local device mode
+			json_get_vars device mode
+			uci -q batch <<-EOF
+				set system.$cfg.trigger='netdev'
+				set system.$cfg.mode='$mode'
+				set system.$cfg.dev='$device'
+			EOF
+		;;
+
+		usb)
+			local device
+			json_get_vars device
+			uci -q batch <<-EOF
+				set system.$cfg.trigger='usbdev'
+				set system.$cfg.interval='50'
+				set system.$cfg.dev='$device'
+			EOF
+		;;
+
+		usbport)
+			local ports port
+			json_get_values ports ports
+			uci set system.$cfg.trigger='usbport'
+			for port in $ports; do
+				uci add_list system.$cfg.port=$port
+			done
+		;;
+
+		rssi)
+			local iface minq maxq offset factor
+			json_get_vars iface minq maxq offset factor
+			uci -q batch <<-EOF
+				set system.$cfg.trigger='rssi'
+				set system.$cfg.iface='rssid_$iface'
+				set system.$cfg.minq='$minq'
+				set system.$cfg.maxq='$maxq'
+				set system.$cfg.offset='$offset'
+				set system.$cfg.factor='$factor'
+			EOF
+		;;
+
+		switch)
+			local port_mask speed_mask
+			json_get_vars port_mask speed_mask
+			uci -q batch <<-EOF
+				set system.$cfg.port_mask='$port_mask'
+				set system.$cfg.speed_mask='$speed_mask'
+			EOF
+		;;
+
+		portstate)
+			local port_state
+			json_get_vars port_state
+			uci -q batch <<-EOF
+				set system.$cfg.port_state='$port_state'
+			EOF
+		;;
+
+		timer|oneshot)
+			local delayon delayoff
+			json_get_vars delayon delayoff
+			uci -q batch <<-EOF
+				set system.$cfg.trigger='$type'
+				set system.$cfg.delayon='$delayon'
+				set system.$cfg.delayoff='$delayoff'
+			EOF
+		;;
+	esac
+
 	json_select ..
 	json_select ..
+}
 
-	uci -q batch <<EOF
-delete system.$cfg
-set system.$cfg='led'
-set system.$cfg.name='$name'
-set system.$cfg.sysfs='$sysfs'
-set system.$cfg.dev='$device'
-set system.$cfg.trigger='$trigger'
-set system.$cfg.port_mask='$port_mask'
-set system.$cfg.default='$default'
-EOF
-	case $type in
-	netdev)
-		uci -q batch <<EOF
-set system.$cfg.trigger='netdev'
-set system.$cfg.mode='link tx rx'
-EOF
-	;;
-
-	usb)
-		uci -q batch <<EOF
-set system.$cfg.trigger='usbdev'
-set system.$cfg.interval='50'
-EOF
-	;;
+generate_gpioswitch() {
+	local cfg="$1"
 
-	esac
+	json_select gpioswitch
+		json_select "$cfg"
+			local name pin default
+			json_get_vars name pin default
+			uci -q batch <<-EOF
+				delete system.$cfg
+				set system.$cfg='gpio_switch'
+				set system.$cfg.name='$name'
+				set system.$cfg.gpio_pin='$pin'
+				set system.$cfg.value='$default'
+			EOF
+		json_select ..
+	json_select ..
 }
 
 json_init
 json_load "$(cat ${CFG})"
 
-generate_static_network
+if [ ! -s /etc/config/network ]; then
+	touch /etc/config/network
+	generate_static_network
+
+	json_get_keys keys network
+	for key in $keys; do generate_network $key; done
+
+	json_get_keys keys switch
+	for key in $keys; do generate_switch $key; done
+fi
 
-json_get_keys keys network
-for key in $keys; do generate_network $key; done
+if [ ! -s /etc/config/system ]; then
+	touch /etc/config/system
+	generate_static_system
 
-json_get_keys keys switch
-for key in $keys; do generate_switch $key; done
+	json_get_keys keys rssimon
+	for key in $keys; do generate_rssimon $key; done
 
-json_get_keys keys led
-for key in $keys; do generate_led $key; done
+	json_get_keys keys gpioswitch
+	for key in $keys; do generate_gpioswitch $key; done
 
+	json_get_keys keys led
+	for key in $keys; do generate_led $key; done
+fi
 uci commit