X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=package%2Fbase-files%2Ffiles%2Fbin%2Fconfig_generate;h=f9b4e5ca9ef790c07a3b715f676ec4705f7168f1;hp=7e0e2acd3b2a30d62ddd110df562465ee6da238b;hb=b0ac825884e7bfe3f68385109df3234e37022c71;hpb=80f767d09390e69baeeca3f039e2b44bad4c6913

diff --git a/package/base-files/files/bin/config_generate b/package/base-files/files/bin/config_generate
index 7e0e2acd3b..f9b4e5ca9e 100755
--- a/package/base-files/files/bin/config_generate
+++ b/package/base-files/files/bin/config_generate
@@ -4,7 +4,8 @@ CFG=/etc/board.json
 
 . /usr/share/libubox/jshn.sh
 
-[ -f $CFG ] || exit 1
+[ -s $CFG ] || /bin/board_detect || exit 1
+[ -s /etc/config/network -a -s /etc/config/system ] && exit 0
 
 generate_static_network() {
 	uci -q batch <<-EOF
@@ -18,14 +19,49 @@ generate_static_network() {
 		set network.globals='globals'
 		set network.globals.ula_prefix='auto'
 	EOF
+
+	if json_is_a dsl object; then
+		json_select dsl
+			if json_is_a atmbridge object; then
+				json_select atmbridge
+					local vpi vci encaps payload
+					json_get_vars vpi vci encaps payload
+					uci -q batch <<-EOF
+						delete network.atm
+						set network.atm='atm-bridge'
+						set network.atm.vpi='$vpi'
+						set network.atm.vci='$vci'
+						set network.atm.encaps='$encaps'
+						set network.atm.payload='$payload'
+					EOF
+				json_select ..
+			fi
+
+			if json_is_a modem object; then
+				json_select modem
+					local type annex firmware tone xfer_mode
+					json_get_vars type annex firmware tone xfer_mode
+					uci -q batch <<-EOF
+						delete network.dsl
+						set network.dsl='dsl'
+						set network.dsl.annex='$annex'
+						set network.dsl.firmware='$firmware'
+						set network.dsl.tone='$tone'
+						set network.dsl.xfer_mode='$xfer_mode'
+					EOF
+				json_select ..
+			fi
+		json_select ..
+	fi
 }
 
+addr_offset=2
 generate_network() {
-	local ifname macaddr type
+	local ifname macaddr protocol type ipaddr netmask
 
 	json_select network
 		json_select "$1"
-			json_get_vars ifname macaddr
+			json_get_vars ifname macaddr protocol ipaddr netmask
 		json_select ..
 	json_select ..
 
@@ -42,26 +78,59 @@ generate_network() {
 		set network.$1.type='$type'
 		set network.$1.ifname='$ifname'
 		set network.$1.proto='none'
-		set network.$1.macaddr='$macaddr'
 	EOF
 
-	case "$1" in
-		lan)
+	[ -n "$macaddr" ] && uci -q batch <<-EOF
+		delete network.$1_dev
+		set network.$1_dev='device'
+		set network.$1_dev.name='$ifname'
+		set network.$1_dev.macaddr='$macaddr'
+	EOF
+
+	case "$protocol" in
+		static)
+			local ipad
+			case "$1" in
+				lan) ipad=${ipaddr:-"192.168.1.1"} ;;
+				*) ipad=${ipaddr:-"192.168.$((addr_offset++)).1"} ;;
+			esac
+
+			netm=${netmask:-"255.255.255.0"}
+
 			uci -q batch <<-EOF
 				set network.$1.proto='static'
-				set network.$1.ipaddr='192.168.1.1'
-				set network.$1.netmask='255.255.255.0'
+				set network.$1.ipaddr='$ipad'
+				set network.$1.netmask='$netm'
 				set network.$1.ip6assign='60'
 			EOF
 		;;
-		wan)
+
+		dhcp)
+			# fixup IPv6 slave interface if parent is a bridge
+			[ "$type" = "bridge" ] && ifname="br-$1"
+
 			uci -q batch <<-EOF
 				set network.$1.proto='dhcp'
-				delete network.wan6
-				set network.wan6='interface'
-				set network.wan6.type='$type'
-				set network.wan6.ifname='$ifname'
-				set network.wan6.proto='dhcpv6'
+				delete network.${1}6
+				set network.${1}6='interface'
+				set network.${1}6.ifname='$ifname'
+				set network.${1}6.proto='dhcpv6'
+			EOF
+		;;
+
+		pppoe)
+			# fixup IPv6 slave interface
+			ifname="pppoe-$1"
+
+			uci -q batch <<-EOF
+				set network.$1.proto='pppoe'
+				set network.$1.username='username'
+				set network.$1.password='password'
+				set network.$1.ipv6='auto'
+				delete network.${1}6
+				set network.${1}6='interface'
+				set network.${1}6.ifname='$ifname'
+				set network.${1}6.proto='dhcpv6'
 			EOF
 		;;
 	esac
@@ -75,55 +144,59 @@ generate_switch_vlans_ports() {
 	# autogenerate vlans
 	#
 
-	json_get_keys roles roles
-	json_select roles
+	if json_is_a roles array; then
+		json_get_keys roles roles
+		json_select roles
 
-	for role in $roles; do
-		json_select "$role"
-			json_get_vars ports
-		json_select ..
+		for role in $roles; do
+			json_select "$role"
+				json_get_vars ports
+			json_select ..
 
-		uci -q batch <<-EOF
-			add network switch_vlan
-			set network.@switch_vlan[-1].device='$switch'
-			set network.@switch_vlan[-1].vlan='$role'
-			set network.@switch_vlan[-1].ports='$ports'
-		EOF
-	done
+			uci -q batch <<-EOF
+				add network switch_vlan
+				set network.@switch_vlan[-1].device='$switch'
+				set network.@switch_vlan[-1].vlan='$role'
+				set network.@switch_vlan[-1].ports='$ports'
+			EOF
+		done
 
-	json_select ..
+		json_select ..
+	fi
 
 
 	#
 	# write port specific settings
 	#
 
-	json_get_keys ports ports
-	json_select ports
-
-	for port in $ports; do
-		json_select "$port"
-			json_get_vars num
-
-			if json_is_a attr object; then
-				json_get_keys attr attr
-				json_select attr
-					uci -q batch <<-EOF
-						add network switch_port
-						set network.@switch_port[-1].device='$switch'
-						set network.@switch_port[-1].port=$num
-					EOF
+	if json_is_a ports array; then
+		json_get_keys ports ports
+		json_select ports
+
+		for port in $ports; do
+			json_select "$port"
+				json_get_vars num
+
+				if json_is_a attr object; then
+					json_get_keys attr attr
+					json_select attr
+						uci -q batch <<-EOF
+							add network switch_port
+							set network.@switch_port[-1].device='$switch'
+							set network.@switch_port[-1].port=$num
+						EOF
+
+						for attr in $attr; do
+							json_get_var val "$attr"
+							uci -q set network.@switch_port[-1].$attr="$val"
+						done
+					json_select ..
+				fi
+			json_select ..
+		done
 
-					for attr in $attr; do
-						json_get_var val "$attr"
-						uci -q set network.@switch_port[-1].$attr="$val"
-					done
-				json_select ..
-			fi
 		json_select ..
-	done
-
-	json_select ..
+	fi
 }
 
 generate_switch() {
@@ -148,6 +221,52 @@ generate_switch() {
 	json_select ..
 }
 
+
+generate_static_system() {
+	uci -q batch <<-EOF
+		delete system.@system[0]
+		add system system
+		set system.@system[-1].hostname='lede'
+		set system.@system[-1].timezone='UTC'
+		set system.@system[-1].ttylogin='0'
+		set system.@system[-1].log_size='64'
+		set system.@system[-1].urandom_seed='0'
+
+		delete system.ntp
+		set system.ntp='timeserver'
+		set system.ntp.enabled='1'
+		set system.ntp.enable_server='0'
+		add_list system.ntp.server='0.lede.pool.ntp.org'
+		add_list system.ntp.server='1.lede.pool.ntp.org'
+		add_list system.ntp.server='2.lede.pool.ntp.org'
+		add_list system.ntp.server='3.lede.pool.ntp.org'
+	EOF
+
+	if json_is_a system object; then
+		json_select system
+			local hostname
+			if json_get_var hostname hostname; then
+				uci -q set "system.@system[-1].hostname=$hostname"
+			fi
+
+			if json_is_a ntpserver array; then
+				local keys key
+				json_get_keys keys ntpserver
+				json_select ntpserver
+					uci -q delete "system.ntp.server"
+
+					for key in $keys; do
+						local server
+						if json_get_var server "$key"; then
+							uci -q add_list "system.ntp.server=$server"
+						fi
+					done
+				json_select ..
+			fi
+		json_select ..
+	fi
+}
+
 generate_rssimon() {
 	local key="$1"
 	local cfg="rssid_$key"
@@ -197,11 +316,11 @@ generate_led() {
 		;;
 
 		netdev)
-			local device
-			json_get_vars device
+			local device mode
+			json_get_vars device mode
 			uci -q batch <<-EOF
 				set system.$cfg.trigger='netdev'
-				set system.$cfg.mode='link tx rx'
+				set system.$cfg.mode='$mode'
 				set system.$cfg.dev='$device'
 			EOF
 		;;
@@ -216,6 +335,15 @@ generate_led() {
 			EOF
 		;;
 
+		usbport)
+			local ports port
+			json_get_values ports ports
+			uci set system.$cfg.trigger='usbport'
+			for port in $ports; do
+				uci add_list system.$cfg.port=$port
+			done
+		;;
+
 		rssi)
 			local iface minq maxq offset factor
 			json_get_vars iface minq maxq offset factor
@@ -230,10 +358,29 @@ generate_led() {
 		;;
 
 		switch)
-			local port_mask
-			json_get_vars port_mask
+			local port_mask speed_mask
+			json_get_vars port_mask speed_mask
 			uci -q batch <<-EOF
 				set system.$cfg.port_mask='$port_mask'
+				set system.$cfg.speed_mask='$speed_mask'
+			EOF
+		;;
+
+		portstate)
+			local port_state
+			json_get_vars port_state
+			uci -q batch <<-EOF
+				set system.$cfg.port_state='$port_state'
+			EOF
+		;;
+
+		timer|oneshot)
+			local delayon delayoff
+			json_get_vars delayon delayoff
+			uci -q batch <<-EOF
+				set system.$cfg.trigger='$type'
+				set system.$cfg.delayon='$delayon'
+				set system.$cfg.delayoff='$delayoff'
 			EOF
 		;;
 	esac
@@ -242,21 +389,49 @@ generate_led() {
 	json_select ..
 }
 
+generate_gpioswitch() {
+	local cfg="$1"
+
+	json_select gpioswitch
+		json_select "$cfg"
+			local name pin default
+			json_get_vars name pin default
+			uci -q batch <<-EOF
+				delete system.$cfg
+				set system.$cfg='gpio_switch'
+				set system.$cfg.name='$name'
+				set system.$cfg.gpio_pin='$pin'
+				set system.$cfg.value='$default'
+			EOF
+		json_select ..
+	json_select ..
+}
+
 json_init
 json_load "$(cat ${CFG})"
 
-generate_static_network
+if [ ! -s /etc/config/network ]; then
+	touch /etc/config/network
+	generate_static_network
+
+	json_get_keys keys network
+	for key in $keys; do generate_network $key; done
 
-json_get_keys keys network
-for key in $keys; do generate_network $key; done
+	json_get_keys keys switch
+	for key in $keys; do generate_switch $key; done
+fi
 
-json_get_keys keys switch
-for key in $keys; do generate_switch $key; done
+if [ ! -s /etc/config/system ]; then
+	touch /etc/config/system
+	generate_static_system
 
-json_get_keys keys rssimon
-for key in $keys; do generate_rssimon $key; done
+	json_get_keys keys rssimon
+	for key in $keys; do generate_rssimon $key; done
 
-json_get_keys keys led
-for key in $keys; do generate_led $key; done
+	json_get_keys keys gpioswitch
+	for key in $keys; do generate_gpioswitch $key; done
 
+	json_get_keys keys led
+	for key in $keys; do generate_led $key; done
+fi
 uci commit