X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=package%2Fkernel%2Flinux%2Fmodules%2Fother.mk;h=c521405040009c4cfd2e9b8eedbcacda8b8228d4;hp=e4b2064dc469e8a043809fec81f7015e2b88bedd;hb=31abe083311e03d767854ffaf53158afa7097025;hpb=344fde35e3331dd999b38298b4743dce9a88583d

diff --git a/package/kernel/linux/modules/other.mk b/package/kernel/linux/modules/other.mk
index e4b2064dc4..c521405040 100644
--- a/package/kernel/linux/modules/other.mk
+++ b/package/kernel/linux/modules/other.mk
@@ -30,33 +30,22 @@ $(eval $(call KernelPackage,6lowpan))
 define KernelPackage/bluetooth
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Bluetooth support
-  DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +!LINUX_3_18:kmod-crypto-cmac +!LINUX_3_18:kmod-regmap
+  DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +!LINUX_3_18:kmod-crypto-cmac +!LINUX_3_18:kmod-regmap +!(LINUX_3_18||LINUX_4_9):kmod-crypto-ecdh
   KCONFIG:= \
-	CONFIG_BLUEZ \
-	CONFIG_BLUEZ_L2CAP \
-	CONFIG_BLUEZ_SCO \
-	CONFIG_BLUEZ_RFCOMM \
-	CONFIG_BLUEZ_BNEP \
-	CONFIG_BLUEZ_HCIUART \
-	CONFIG_BLUEZ_HCIUSB \
-	CONFIG_BLUEZ_HIDP \
 	CONFIG_BT \
 	CONFIG_BT_BREDR=y \
 	CONFIG_BT_DEBUGFS=n \
-	CONFIG_BT_L2CAP=y \
 	CONFIG_BT_LE=y \
-	CONFIG_BT_SCO=y \
 	CONFIG_BT_RFCOMM \
 	CONFIG_BT_BNEP \
 	CONFIG_BT_HCIBTUSB \
 	CONFIG_BT_HCIBTUSB_BCM=n \
-	CONFIG_BT_HCIUSB \
 	CONFIG_BT_HCIUART \
 	CONFIG_BT_HCIUART_BCM=n \
 	CONFIG_BT_HCIUART_INTEL=n \
 	CONFIG_BT_HCIUART_H4 \
-	CONFIG_BT_HIDP \
-	CONFIG_HID_SUPPORT=y
+	CONFIG_BT_HCIUART_NOKIA=n \
+	CONFIG_BT_HIDP
   $(call AddDepends/rfkill)
   FILES:= \
 	$(LINUX_DIR)/net/bluetooth/bluetooth.ko \
@@ -114,12 +103,37 @@ endef
 $(eval $(call KernelPackage,bluetooth_6lowpan))
 
 
+define KernelPackage/btmrvl
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Marvell Bluetooth Kernel Module support
+  DEPENDS:=+kmod-mmc +kmod-bluetooth +mwifiex-sdio-firmware
+  KCONFIG:= \
+	CONFIG_BT_MRVL \
+	CONFIG_BT_MRVL_SDIO
+  $(call AddDepends/bluetooth)
+  FILES:= \
+	$(LINUX_DIR)/drivers/bluetooth/btmrvl.ko \
+	$(LINUX_DIR)/drivers/bluetooth/btmrvl_sdio.ko
+  AUTOLOAD:=$(call AutoProbe,btmrvl btmrvl_sdio)
+endef
+
+define KernelPackage/btmrvl/description
+ Kernel support for Marvell SDIO Bluetooth Module
+endef
+
+$(eval $(call KernelPackage,btmrvl))
+
+
 define KernelPackage/dma-buf
   SUBMENU:=$(OTHER_MENU)
   TITLE:=DMA shared buffer support
   HIDDEN:=1
   KCONFIG:=CONFIG_DMA_SHARED_BUFFER
-  FILES:=$(LINUX_DIR)/drivers/dma-buf/dma-shared-buffer.ko
+  ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"")
+    ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI)),"")
+      FILES:=$(LINUX_DIR)/drivers/dma-buf/dma-shared-buffer.ko
+    endif
+  endif
   AUTOLOAD:=$(call AutoLoad,20,dma-shared-buffer)
 endef
 $(eval $(call KernelPackage,dma-buf))
@@ -158,7 +172,7 @@ define KernelPackage/eeprom-at24
   SUBMENU:=$(OTHER_MENU)
   TITLE:=EEPROM AT24 support
   KCONFIG:=CONFIG_EEPROM_AT24
-  DEPENDS:=+kmod-i2c-core +kmod-nvmem
+  DEPENDS:=+kmod-i2c-core +kmod-nvmem +LINUX_4_19:kmod-regmap
   FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
   AUTOLOAD:=$(call AutoProbe,at24)
 endef
@@ -205,10 +219,14 @@ $(eval $(call KernelPackage,gpio-dev))
 define KernelPackage/gpio-mcp23s08
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Microchip MCP23xxx I/O expander
-  DEPENDS:=@GPIO_SUPPORT +PACKAGE_kmod-i2c-core:kmod-i2c-core
-  KCONFIG:=CONFIG_GPIO_MCP23S08
-  FILES:=$(LINUX_DIR)/drivers/gpio/gpio-mcp23s08.ko
-  AUTOLOAD:=$(call AutoLoad,40,gpio-mcp23s08)
+  DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +!(LINUX_3_18||LINUX_4_9):kmod-regmap
+  KCONFIG:= \
+	CONFIG_GPIO_MCP23S08 \
+	CONFIG_PINCTRL_MCP23S08
+  FILES:= \
+	$(LINUX_DIR)/drivers/gpio/gpio-mcp23s08.ko@lt4.13 \
+	$(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08.ko@ge4.13
+  AUTOLOAD:=$(call AutoLoad,40,gpio-mcp23s08@lt4.13 pinctrl-mcp23s08@ge4.13)
 endef
 
 define KernelPackage/gpio-mcp23s08/description
@@ -221,9 +239,9 @@ $(eval $(call KernelPackage,gpio-mcp23s08))
 define KernelPackage/gpio-nxp-74hc164
   SUBMENU:=$(OTHER_MENU)
   TITLE:=NXP 74HC164 GPIO expander support
-  KCONFIG:=CONFIG_GPIO_NXP_74HC164
-  FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
-  AUTOLOAD:=$(call AutoProbe,nxp_74hc164)
+  KCONFIG:=CONFIG_GPIO_74X164
+  FILES:=$(LINUX_DIR)/drivers/gpio/gpio-74x164.ko
+  AUTOLOAD:=$(call AutoProbe,gpio-74x164)
 endef
 
 define KernelPackage/gpio-nxp-74hc164/description
@@ -263,84 +281,54 @@ endef
 
 $(eval $(call KernelPackage,gpio-pcf857x))
 
-define KernelPackage/iio-core
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=Industrial IO core
-  KCONFIG:= \
-	CONFIG_IIO \
-	CONFIG_IIO_BUFFER=y \
-	CONFIG_IIO_KFIFO_BUF \
-	CONFIG_IIO_TRIGGER=y \
-	CONFIG_IIO_TRIGGERED_BUFFER
-  FILES:= \
-	$(LINUX_DIR)/drivers/iio/industrialio.ko \
-	$(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/industrialio-triggered-buffer.ko@lt4.4) \
-	$(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/buffer/industrialio-triggered-buffer.ko@ge4.4) \
-	$(LINUX_DIR)/drivers/iio/kfifo_buf.ko@lt4.4 \
-	$(LINUX_DIR)/drivers/iio/buffer/kfifo_buf.ko@ge4.4
-  AUTOLOAD:=$(call AutoLoad,55,industrialio kfifo_buf industrialio-triggered-buffer)
-endef
-
-define KernelPackage/iio-core/description
- The industrial I/O subsystem provides a unified framework for
- drivers for many different types of embedded sensors using a
- number of different physical interfaces (i2c, spi, etc)
-endef
 
-$(eval $(call KernelPackage,iio-core))
-
-
-define KernelPackage/iio-ad799x
+define KernelPackage/ppdev
   SUBMENU:=$(OTHER_MENU)
-  DEPENDS:=kmod-i2c-core kmod-iio-core
-  TITLE:=Analog Devices AD799x ADC driver
+  TITLE:=Parallel port support
   KCONFIG:= \
-	CONFIG_AD799X_RING_BUFFER=y \
-	CONFIG_AD799X
-  FILES:=$(LINUX_DIR)/drivers/iio/adc/ad799x.ko
-  AUTOLOAD:=$(call AutoLoad,56,ad799x)
-endef
-
-define KernelPackage/iio-ad799x/description
- support for Analog Devices:
- ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
- i2c analog to digital converters (ADC).
+	CONFIG_PARPORT \
+	CONFIG_PPDEV
+  FILES:= \
+	$(LINUX_DIR)/drivers/parport/parport.ko \
+	$(LINUX_DIR)/drivers/char/ppdev.ko
+  AUTOLOAD:=$(call AutoLoad,50,parport ppdev)
 endef
 
-$(eval $(call KernelPackage,iio-ad799x))
+$(eval $(call KernelPackage,ppdev))
 
 
-define KernelPackage/iio-dht11
+define KernelPackage/parport-pc
   SUBMENU:=$(OTHER_MENU)
-  DEPENDS:=kmod-iio-core @GPIO_SUPPORT @USES_DEVICETREE
-  TITLE:=DHT11 (and compatible) humidity and temperature sensors
+  TITLE:=Parallel port interface (PC-style) support
+  DEPENDS:=+kmod-ppdev
   KCONFIG:= \
-	CONFIG_DHT11
-  FILES:=$(LINUX_DIR)/drivers/iio/humidity/dht11.ko
-  AUTOLOAD:=$(call AutoLoad,56,dht11)
-endef
-
-define KernelPackage/iio-dht11/description
- support for DHT11 and DHT22 digitial humidity and temperature sensors
- attached at GPIO lines. You will need a custom device tree file to
- specify the GPIO line to use.
+	CONFIG_KS0108=n \
+	CONFIG_PARPORT_PC \
+	CONFIG_PARPORT_1284=y \
+	CONFIG_PARPORT_PC_FIFO=y \
+	CONFIG_PARPORT_PC_PCMCIA=n \
+	CONFIG_PARPORT_PC_SUPERIO=y \
+	CONFIG_PARPORT_SERIAL=n \
+	CONFIG_PARIDE=n \
+	CONFIG_SCSI_IMM=n \
+	CONFIG_SCSI_PPA=n
+  FILES:= \
+	$(LINUX_DIR)/drivers/parport/parport_pc.ko
+  AUTOLOAD:=$(call AutoLoad,51,parport_pc)
 endef
 
-$(eval $(call KernelPackage,iio-dht11))
+$(eval $(call KernelPackage,parport-pc))
 
 
 define KernelPackage/lp
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Parallel port and line printer support
+  TITLE:=Parallel port line printer device support
+  DEPENDS:=+kmod-ppdev
   KCONFIG:= \
-	CONFIG_PARPORT \
-	CONFIG_PRINTER \
-	CONFIG_PPDEV
+	CONFIG_PRINTER
   FILES:= \
-	$(LINUX_DIR)/drivers/parport/parport.ko \
-	$(LINUX_DIR)/drivers/char/lp.ko \
-	$(LINUX_DIR)/drivers/char/ppdev.ko
-  AUTOLOAD:=$(call AutoLoad,50,parport lp ppdev)
+	$(LINUX_DIR)/drivers/char/lp.ko
+  AUTOLOAD:=$(call AutoLoad,52,lp)
 endef
 
 $(eval $(call KernelPackage,lp))
@@ -361,7 +349,8 @@ define KernelPackage/mmc
 	CONFIG_SDIO_UART=n
   FILES:= \
 	$(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
-	$(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
+	$(LINUX_DIR)/drivers/mmc/card/mmc_block.ko@lt4.10 \
+	$(LINUX_DIR)/drivers/mmc/core/mmc_block.ko@ge4.10
   AUTOLOAD:=$(call AutoProbe,mmc_core mmc_block,1)
 endef
 
@@ -418,7 +407,8 @@ $(eval $(call KernelPackage,rfkill))
 define KernelPackage/softdog
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Software watchdog driver
-  KCONFIG:=CONFIG_SOFT_WATCHDOG
+  KCONFIG:=CONFIG_SOFT_WATCHDOG \
+  	CONFIG_SOFT_WATCHDOG_PRETIMEOUT=n
   FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
   AUTOLOAD:=$(call AutoLoad,50,softdog,1)
 endef
@@ -486,7 +476,7 @@ define KernelPackage/rtc-ds1307
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Dallas/Maxim DS1307 (and compatible) RTC support
   DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
-  DEPENDS:=+kmod-i2c-core
+  DEPENDS:=+kmod-i2c-core +LINUX_4_14:kmod-regmap
   KCONFIG:=CONFIG_RTC_DRV_DS1307 \
 	CONFIG_RTC_CLASS=y
   FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1307.ko
@@ -648,6 +638,36 @@ endef
 $(eval $(call KernelPackage,mtdtests))
 
 
+define KernelPackage/mtdoops
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Log panic/oops to an MTD buffer
+  KCONFIG:=CONFIG_MTD_OOPS
+  FILES:=$(LINUX_DIR)/drivers/mtd/mtdoops.ko
+endef
+
+define KernelPackage/mtdoops/description
+ Kernel modules for Log panic/oops to an MTD buffer
+endef
+
+$(eval $(call KernelPackage,mtdoops))
+
+
+define KernelPackage/mtdram
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Test MTD driver using RAM
+  KCONFIG:=CONFIG_MTD_MTDRAM \
+    CONFIG_MTDRAM_TOTAL_SIZE=4096 \
+    CONFIG_MTDRAM_ERASE_SIZE=128
+  FILES:=$(LINUX_DIR)/drivers/mtd/devices/mtdram.ko
+endef
+
+define KernelPackage/mtdram/description
+  Test MTD driver using RAM
+endef
+
+$(eval $(call KernelPackage,mtdram))
+
+
 define KernelPackage/serial-8250
   SUBMENU:=$(OTHER_MENU)
   TITLE:=8250 UARTs
@@ -674,6 +694,22 @@ endef
 $(eval $(call KernelPackage,serial-8250))
 
 
+define KernelPackage/serial-8250-exar
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Exar 8250 UARTs
+  KCONFIG:= CONFIG_SERIAL_8250_EXAR
+  FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250_exar.ko
+  AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_exar)
+  DEPENDS:=+kmod-serial-8250
+endef
+
+define KernelPackage/serial-8250-exar/description
+ Kernel module for Exar serial ports
+endef
+
+$(eval $(call KernelPackage,serial-8250-exar))
+
+
 define KernelPackage/regmap
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Generic register map support
@@ -684,11 +720,15 @@ define KernelPackage/regmap
 	   CONFIG_REGMAP_I2C \
 	   CONFIG_SPI=y
   FILES:= \
-	$(LINUX_DIR)/drivers/base/regmap/regmap-core.ko \
 	$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko \
 	$(LINUX_DIR)/drivers/base/regmap/regmap-mmio.ko \
 	$(if $(CONFIG_SPI),$(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko)
   AUTOLOAD:=$(call AutoLoad,21,regmap-core regmap-i2c regmap-mmio regmap-spi)
+  ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"")
+   ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI)),"")
+    FILES += $(LINUX_DIR)/drivers/base/regmap/regmap-core.ko
+   endif
+  endif
 endef
 
 define KernelPackage/regmap/description
@@ -722,6 +762,7 @@ define KernelPackage/zram
 	CONFIG_ZRAM \
 	CONFIG_ZRAM_DEBUG=n \
 	CONFIG_PGTABLE_MAPPING=n \
+	CONFIG_ZRAM_WRITEBACK=n \
 	CONFIG_ZSMALLOC_STAT=n \
 	CONFIG_ZRAM_LZ4_COMPRESS=y
   FILES:= \
@@ -854,6 +895,22 @@ endef
 
 $(eval $(call KernelPackage,random-omap))
 
+define KernelPackage/random-tpm
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Hardware Random Number Generator TPM support
+  KCONFIG:=CONFIG_HW_RANDOM_TPM
+  FILES:=$(LINUX_DIR)/drivers/char/hw_random/tpm-rng.ko
+  DEPENDS:= +kmod-random-core +kmod-tpm @!LINUX_4_19
+  AUTOLOAD:=$(call AutoProbe,tpm-rng)
+endef
+
+define KernelPackage/random-tpm/description
+ Kernel module for the Random Number Generator
+ in the Trusted Platform Module.
+endef
+
+$(eval $(call KernelPackage,random-tpm))
+
 define KernelPackage/thermal
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Generic Thermal sysfs driver
@@ -866,6 +923,7 @@ define KernelPackage/thermal
 	CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y \
 	CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=n \
 	CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=n \
+	CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 \
 	CONFIG_THERMAL_GOV_FAIR_SHARE=n \
 	CONFIG_THERMAL_GOV_STEP_WISE=y \
 	CONFIG_THERMAL_GOV_USER_SPACE=n \
@@ -922,7 +980,7 @@ $(eval $(call KernelPackage,echo))
 define KernelPackage/bmp085
   SUBMENU:=$(OTHER_MENU)
   TITLE:=BMP085/BMP18x pressure sensor
-  DEPENDS:= +kmod-regmap @!LINUX_3_18 @!LINUX_4_1
+  DEPENDS:= +kmod-regmap @!LINUX_3_18
   KCONFIG:= CONFIG_BMP085
   FILES:= $(LINUX_DIR)/drivers/misc/bmp085.ko
 endef
@@ -1061,3 +1119,21 @@ define KernelPackage/itco-wdt/description
 endef
 
 $(eval $(call KernelPackage,itco-wdt))
+
+
+define KernelPackage/it87-wdt
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=ITE IT87 Watchdog Timer
+  KCONFIG:=CONFIG_IT87_WDT
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/it87_wdt.ko
+  AUTOLOAD:=$(call AutoLoad,50,it87-wdt,1)
+  MODPARAMS.it87-wdt:= \
+	nogameport=1 \
+	nocir=1
+endef
+
+define KernelPackage/it87-wdt/description
+  Kernel module for ITE IT87 Watchdog Timer
+endef
+
+$(eval $(call KernelPackage,it87-wdt))