X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=package%2Fkernel%2Flinux%2Fmodules%2Fusb.mk;h=fafa9a021e10c3f965f0325e99db3375fa45c4ab;hp=fc47568dbc646a81665e83b7af655ec294bda671;hb=11945174cf182a526158f0831b7153fff4d3ec6b;hpb=63442803af9930234523a20bea89c4f3d46fee56

diff --git a/package/kernel/linux/modules/usb.mk b/package/kernel/linux/modules/usb.mk
index fc47568dbc..fafa9a021e 100644
--- a/package/kernel/linux/modules/usb.mk
+++ b/package/kernel/linux/modules/usb.mk
@@ -18,8 +18,7 @@ define KernelPackage/usb-core
   KCONFIG:=CONFIG_USB CONFIG_XPS_USB_HCD_XILINX=n CONFIG_USB_FHCI_HCD=n
   FILES:= \
 	$(LINUX_DIR)/drivers/usb/core/usbcore.ko \
-	$(LINUX_DIR)/drivers/usb/usb-common.ko@lt3.16 \
-	$(LINUX_DIR)/drivers/usb/common/usb-common.ko@ge3.16
+	$(LINUX_DIR)/drivers/usb/common/usb-common.ko
   AUTOLOAD:=$(call AutoLoad,20,usb-common usbcore,1)
   $(call AddDepends/nls)
 endef
@@ -37,85 +36,31 @@ define AddDepends/usb
 endef
 
 
-define KernelPackage/usb-musb-hdrc
-  TITLE:=Support for Mentor Graphics silicon dual role USB
-  KCONFIG:= \
-	CONFIG_USB_MUSB_HDRC \
-	CONFIG_USB_INVENTRA_DMA=n \
-	CONFIG_USB_TI_CPPI41_DMA=n \
-	CONFIG_MUSB_PIO_ONLY=y \
-	CONFIG_USB_MUSB_DUAL_ROLE=y \
-	CONFIG_USB_MUSB_GADGET=n \
-	CONFIG_USB_MUSB_HOST=n \
-	CONFIG_USB_MUSB_DEBUG=y
-  DEPENDS:= \
-	@(TARGET_omap||TARGET_omap24xx) +kmod-usb-gadget \
-	+TARGET_omap24xx:kmod-usb-musb-tusb6010
-  FILES:=$(LINUX_DIR)/drivers/usb/musb/musb_hdrc.ko
-  AUTOLOAD:=$(call AutoLoad,46,musb_hdrc)
+define KernelPackage/usb-ledtrig-usbport
+  TITLE:=LED trigger for USB ports
+  KCONFIG:=CONFIG_USB_LEDS_TRIGGER_USBPORT
+  DEPENDS:=@!LINUX_3_18
+  FILES:=$(LINUX_DIR)/drivers/usb/core/ledtrig-usbport.ko
+  AUTOLOAD:=$(call AutoLoad,50,ledtrig-usbport)
   $(call AddDepends/usb)
 endef
 
-define KernelPackage/usb-musb-hdrc/description
-  Kernel support for Mentor Graphics silicon dual role USB device.
+define KernelPackage/usb-ledtrig-usbport/description
+  This driver allows LEDs to be controlled by USB events. Enabling this
+  trigger allows specifying list of USB ports that should turn on LED
+  when some USB device gets connected.
+  If possible it should be prefered over similar ledtrig-usbdev.
 endef
 
-$(eval $(call KernelPackage,usb-musb-hdrc))
-
-
-define KernelPackage/usb-musb-platformglue
-  TITLE:=MUSB platform glue layer
-  KCONFIG:= \
-	CONFIG_USB_MUSB_TUSB6010=n \
-	CONFIG_USB_MUSB_OMAP2PLUS=n \
-	CONFIG_USB_MUSB_AM35X=n \
-	CONFIG_USB_MUSB_DSPS \
-	CONFIG_USB_MUSB_UX500=n
-  DEPENDS:=@TARGET_omap +kmod-usb-phy-nop +kmod-usb-musb-hdrc +kmod-usb-phy-am335x
-  FILES:= \
-	$(LINUX_DIR)/drivers/usb/musb/musb_dsps.ko \
-	$(LINUX_DIR)/drivers/usb/musb/musb_am335x.ko
-  AUTOLOAD:=$(call AutoLoad,45,phy-omap-control musb_dsps musb_am335x)
-  $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-musb-platformglue/description
-  MUSB platform glue modules
-endef
-
-$(eval $(call KernelPackage,usb-musb-platformglue))
-
-
-define KernelPackage/usb-musb-tusb6010
-  TITLE:=Support for TUSB 6010
-  KCONFIG:=CONFIG_USB_MUSB_TUSB6010
-  DEPENDS:=@TARGET_omap24xx
-  $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-musb-tusb6010/description
-  TUSB6010 support
-endef
-
-$(eval $(call KernelPackage,usb-musb-tusb6010))
+$(eval $(call KernelPackage,usb-ledtrig-usbport))
 
 
 define KernelPackage/usb-phy-nop
   TITLE:=Support for USB NOP transceiver
   KCONFIG:=CONFIG_NOP_USB_XCEIV
   HIDDEN:=1
-ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/phy/phy-generic.ko),)
   FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-generic.ko
-  AUTOLOAD:=$(call AutoLoad,43,phy-generic)
-else
-ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/phy/phy-nop.ko),)
-  FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-nop.ko
-  AUTOLOAD:=$(call AutoLoad,43,phy-nop)
-else
-  FILES:=$(LINUX_DIR)/drivers/usb/otg/nop-usb-xceiv.ko
-  AUTOLOAD:=$(call AutoLoad,43,nop-usb-xceiv)
-endif
-endif
+  AUTOLOAD:=$(call AutoLoad,21,phy-generic,1)
   $(call AddDepends/usb)
 endef
 
@@ -126,101 +71,51 @@ endef
 $(eval $(call KernelPackage,usb-phy-nop))
 
 
-define KernelPackage/usb-phy-am335x
-  TITLE:=Support for AM335x USB PHY
-  KCONFIG:= \
-	CONFIG_AM335X_PHY_USB \
-	CONFIG_AM335X_CONTROL_USB
-  DEPENDS:=@TARGET_omap +kmod-usb-phy-nop
-  FILES:= \
-	$(LINUX_DIR)/drivers/usb/phy/phy-am335x.ko \
-	$(LINUX_DIR)/drivers/usb/phy/phy-am335x-control.ko
-  AUTOLOAD:=$(call AutoLoad,44,phy-am335x)
-  $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-am335x/description
-  Support for AM335x USB PHY
-endef
-
-$(eval $(call KernelPackage,usb-phy-am335x))
-
-
-define KernelPackage/usb-phy-omap-usb2
-  TITLE:=Support for OMAP2 USB PHY
-  KCONFIG:= \
-	CONFIG_OMAP_USB2 \
-	CONFIG_OMAP_CONTROL_USB
-  DEPENDS:=@TARGET_omap
+define KernelPackage/usb-phy-qcom-dwc3
+  TITLE:=DWC3 USB QCOM PHY driver
+  DEPENDS:=@TARGET_ipq40xx||@TARGET_ipq806x +kmod-usb-dwc3-of-simple
+  KCONFIG:= CONFIG_PHY_QCOM_DWC3
   FILES:= \
-	$(LINUX_DIR)/drivers/phy/phy-omap-usb2.ko \
-	$(LINUX_DIR)/drivers/usb/phy/phy-omap-control.ko
-  AUTOLOAD:=$(call AutoLoad,45,phy-omap-control phy-omap-usb2)
+    $(LINUX_DIR)/drivers/phy/phy-qcom-dwc3.ko@lt4.13 \
+    $(LINUX_DIR)/drivers/phy/qualcomm/phy-qcom-dwc3.ko@ge4.13
+  AUTOLOAD:=$(call AutoLoad,45,phy-qcom-dwc3,1)
   $(call AddDepends/usb)
 endef
 
-define KernelPackage/usb-phy-omap-usb2/description
-  Support for AM335x USB PHY
+define KernelPackage/usb-phy-qcom-dwc3/description
+ This driver provides support for the integrated DesignWare
+ USB3 IP Core within the QCOM SoCs.
 endef
 
-$(eval $(call KernelPackage,usb-phy-omap-usb2))
+$(eval $(call KernelPackage,usb-phy-qcom-dwc3))
 
 
-define KernelPackage/usb-phy-omap-usb3
-  TITLE:=Support for OMAP USB3 PHY
-  KCONFIG:=CONFIG_OMAP_USB3
-  DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2
-  FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-omap-usb3.ko
-  AUTOLOAD:=$(call AutoLoad,45,phy-omap-usb3)
-  $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-omap-usb3/description
-  Support for OMAP USB3 PHY
-endef
-
-$(eval $(call KernelPackage,usb-phy-omap-usb3))
-
-
-define KernelPackage/usb-phy-twl4030
-  TITLE:=Support for TWL4030 OTG PHY
-  KCONFIG:=CONFIG_TWL4030_USB
-  DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2 +kmod-usb-musb-hdrc
-  FILES:=$(LINUX_DIR)/drivers/phy/phy-twl4030-usb.ko
-  AUTOLOAD:=$(call AutoLoad,45,phy-twl4030-usb)
-  $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-twl4030/description
-  Support for TWL4030/TWL5030/TPS659x0 OTG PHY
-endef
-
-$(eval $(call KernelPackage,usb-phy-twl4030))
-
-
-define KernelPackage/usb-phy-twl6030
-  TITLE:=Support for TWL6030 OTG PHY
-  KCONFIG:=CONFIG_TWL6030_USB
-  DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2 +kmod-usb-musb-hdrc
-  FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-twl6030-usb.ko
-  AUTOLOAD:=$(call AutoLoad,45,phy-twl6030-usb)
+define KernelPackage/phy-ath79-usb
+  TITLE:=Support for ATH79 USB PHY
+  KCONFIG:=CONFIG_PHY_AR7100_USB \
+	CONFIG_PHY_AR7200_USB
+  DEPENDS:=@TARGET_ath79
+  HIDDEN:=1
+  FILES:=$(LINUX_DIR)/drivers/phy/phy-ar7100-usb.ko \
+	$(LINUX_DIR)/drivers/phy/phy-ar7200-usb.ko
+  AUTOLOAD:=$(call AutoLoad,21,phy-ar7100-usb phy-ar7200-usb,1)
   $(call AddDepends/usb)
 endef
 
-define KernelPackage/usb-phy-twl6030/description
-  Support for TWL6030 OTG PHY
+define KernelPackage/phy-ath79-usb/description
+  Support for ATH79 USB transceiver
 endef
 
-$(eval $(call KernelPackage,usb-phy-twl6030))
+$(eval $(call KernelPackage,phy-ath79-usb))
 
 
 define KernelPackage/usb-gadget
   TITLE:=USB Gadget support
   KCONFIG:=CONFIG_USB_GADGET
+  HIDDEN:=1
   FILES:=\
-	$(LINUX_DIR)/drivers/usb/gadget/udc-core.ko@lt3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/udc/udc-core.ko@ge3.18
-  AUTOLOAD:=$(call AutoLoad,45,udc-core)
+	$(LINUX_DIR)/drivers/usb/gadget/udc/udc-core.ko
+  AUTOLOAD:=$(call AutoLoad,21,udc-core,1)
   DEPENDS:=@USB_GADGET_SUPPORT
   $(call AddDepends/usb)
 endef
@@ -235,6 +130,7 @@ define KernelPackage/usb-lib-composite
   TITLE:=USB lib composite
   KCONFIG:=CONFIG_USB_LIBCOMPOSITE
   DEPENDS:=+kmod-usb-gadget +kmod-fs-configfs
+  HIDDEN:=1
   FILES:=$(LINUX_DIR)/drivers/usb/gadget/libcomposite.ko
   AUTOLOAD:=$(call AutoLoad,50,libcomposite)
   $(call AddDepends/usb)
@@ -246,71 +142,106 @@ endef
 
 $(eval $(call KernelPackage,usb-lib-composite))
 
+define KernelPackage/usb-gadget-hid
+  TITLE:=USB HID Gadget Support
+  KCONFIG:=CONFIG_USB_G_HID
+  DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
+  FILES:= \
+	  $(LINUX_DIR)/drivers/usb/gadget/legacy/g_hid.ko \
+	  $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_hid.ko
+  AUTOLOAD:=$(call AutoLoad,52,usb_f_hid)
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-gadget-hid/description
+  Kernel support for USB HID Gadget.
+endef
+
+$(eval $(call KernelPackage,usb-gadget-hid))
 
-define KernelPackage/usb-eth-gadget
+define KernelPackage/usb-gadget-ehci-debug
+  TITLE:=USB EHCI debug port Gadget support
+  KCONFIG:=\
+	CONFIG_USB_G_DBGP \
+	CONFIG_USB_G_DBGP_SERIAL=y \
+	CONFIG_USB_G_DBGP_PRINTK=n
+  DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite +kmod-usb-gadget-serial
+  FILES:=$(LINUX_DIR)/drivers/usb/gadget/legacy/g_dbgp.ko
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-gadget-ehci-debug/description
+  Kernel support for USB EHCI debug port Gadget.
+endef
+
+$(eval $(call KernelPackage,usb-gadget-ehci-debug))
+
+define KernelPackage/usb-gadget-eth
   TITLE:=USB Ethernet Gadget support
   KCONFIG:= \
 	CONFIG_USB_ETH \
 	CONFIG_USB_ETH_RNDIS=y \
 	CONFIG_USB_ETH_EEM=n
   DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
-ifeq ($(CONFIG_LINUX_3_10),)
   FILES:= \
-	$(LINUX_DIR)/drivers/usb/gadget/function/u_ether.ko@ge3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm.ko@ge3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm_subset.ko@ge3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_rndis.ko@ge3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/legacy/g_ether.ko@ge3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/u_ether.ko@lt3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/u_rndis.ko@lt3.14 \
-	$(LINUX_DIR)/drivers/usb/gadget/usb_f_ecm.ko@lt3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/usb_f_ecm_subset.ko@lt3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/usb_f_rndis.ko@lt3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/g_ether.ko@lt3.18
-  AUTOLOAD:=$(call AutoLoad,52,usb_f_ecm g_ether)
-else
-  FILES:=$(LINUX_DIR)/drivers/usb/gadget/g_ether.ko
-  AUTOLOAD:=$(call AutoLoad,52,g_ether)
-endif
+	$(LINUX_DIR)/drivers/usb/gadget/function/u_ether.ko \
+	$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm.ko \
+	$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm_subset.ko \
+	$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_rndis.ko \
+	$(LINUX_DIR)/drivers/usb/gadget/legacy/g_ether.ko
+  AUTOLOAD:=$(call AutoLoad,52,usb_f_ecm)
   $(call AddDepends/usb)
 endef
 
-define KernelPackage/usb-eth-gadget/description
+define KernelPackage/usb-gadget-eth/description
  Kernel support for USB Ethernet Gadget
 endef
 
-$(eval $(call KernelPackage,usb-eth-gadget))
+$(eval $(call KernelPackage,usb-gadget-eth))
 
 
-define KernelPackage/usb-serial-gadget
+define KernelPackage/usb-gadget-serial
   TITLE:=USB Serial Gadget support
   KCONFIG:=CONFIG_USB_G_SERIAL
   DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
   FILES:= \
-	$(LINUX_DIR)/drivers/usb/gadget/function/u_serial.ko@ge3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_acm.ko@ge3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_obex.ko@ge3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_serial.ko@ge3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/legacy/g_serial.ko@ge3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/u_serial.ko@lt3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/usb_f_acm.ko@lt3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/usb_f_obex.ko@lt3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/usb_f_serial.ko@lt3.18 \
-	$(LINUX_DIR)/drivers/usb/gadget/g_serial.ko@lt3.18
-  AUTOLOAD:=$(call AutoLoad,52,usb_f_acm g_serial)
+	$(LINUX_DIR)/drivers/usb/gadget/function/u_serial.ko \
+	$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_acm.ko \
+	$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_obex.ko \
+	$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_serial.ko \
+	$(LINUX_DIR)/drivers/usb/gadget/legacy/g_serial.ko
+  AUTOLOAD:=$(call AutoLoad,52,usb_f_acm)
   $(call AddDepends/usb)
 endef
 
-define KernelPackage/usb-serial-gadget/description
+define KernelPackage/usb-gadget-serial/description
   Kernel support for USB Serial Gadget.
 endef
 
-$(eval $(call KernelPackage,usb-serial-gadget))
+$(eval $(call KernelPackage,usb-gadget-serial))
+
+define KernelPackage/usb-gadget-mass-storage
+  TITLE:=USB Mass Storage support
+  KCONFIG:=CONFIG_USB_MASS_STORAGE
+  DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
+  FILES:= \
+	$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_mass_storage.ko \
+	$(LINUX_DIR)/drivers/usb/gadget/legacy/g_mass_storage.ko
+  AUTOLOAD:=$(call AutoLoad,52,usb_f_mass_storage)
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-gadget-mass-storage/description
+  Kernel support for USB Gadget Mass Storage
+endef
+
+$(eval $(call KernelPackage,usb-gadget-mass-storage))
 
 
 define KernelPackage/usb-uhci
   TITLE:=Support for UHCI controllers
   KCONFIG:= \
+	CONFIG_USB_PCI=y \
 	CONFIG_USB_UHCI_ALT \
 	CONFIG_USB_UHCI_HCD
   FILES:=$(LINUX_DIR)/drivers/usb/host/uhci-hcd.ko
@@ -327,7 +258,10 @@ $(eval $(call KernelPackage,usb-uhci,1))
 
 define KernelPackage/usb-ohci
   TITLE:=Support for OHCI controllers
-  DEPENDS:=+TARGET_brcm47xx:kmod-usb-brcm47xx
+  DEPENDS:= \
+	+TARGET_bcm53xx:kmod-usb-bcma \
+	+TARGET_brcm47xx:kmod-usb-bcma \
+	+TARGET_brcm47xx:kmod-usb-ssb
   KCONFIG:= \
 	CONFIG_USB_OHCI \
 	CONFIG_USB_OHCI_HCD \
@@ -337,11 +271,13 @@ define KernelPackage/usb-ohci
 	CONFIG_USB_OCTEON_OHCI=y \
 	CONFIG_USB_OHCI_HCD_OMAP3=y \
 	CONFIG_USB_OHCI_HCD_PLATFORM=y
-  FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko
-ifeq ($(CONFIG_LINUX_3_10),)
-  FILES+=$(LINUX_DIR)/drivers/usb/host/ohci-platform.ko
-endif
-  AUTOLOAD:=$(call AutoLoad,50,ohci-hcd ohci-platform,1)
+  FILES:= \
+	$(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko \
+	$(LINUX_DIR)/drivers/usb/host/ohci-platform.ko
+  ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ohci-at91.ko),)
+    FILES+=$(LINUX_DIR)/drivers/usb/host/ohci-at91.ko
+  endif
+  AUTOLOAD:=$(call AutoLoad,50,ohci-hcd ohci-platform ohci-at91,1)
   $(call AddDepends/usb)
 endef
 
@@ -355,74 +291,95 @@ $(eval $(call KernelPackage,usb-ohci,1))
 define KernelPackage/usb-ohci-pci
   TITLE:=Support for PCI OHCI controllers
   DEPENDS:=@PCI_SUPPORT +kmod-usb-ohci
-  KCONFIG:=CONFIG_USB_OHCI_HCD_PCI
+  KCONFIG:= \
+	CONFIG_USB_PCI=y \
+	CONFIG_USB_OHCI_HCD_PCI
   FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-pci.ko
   AUTOLOAD:=$(call AutoLoad,51,ohci-pci,1)
   $(call AddDepends/usb)
 endef
 
-define KernelPackage/usb2-pci/description
+define KernelPackage/usb-ohci-pci/description
  Kernel support for PCI OHCI controllers
 endef
 
 $(eval $(call KernelPackage,usb-ohci-pci))
 
 
-define KernelPackage/usb2-fsl
-  TITLE:=Support for Freescale USB2 controllers
-  DEPENDS:=@TARGET_mpc85xx
-  KCONFIG:=\
-	CONFIG_USB_FSL_MPH_DR_OF \
-  	CONFIG_USB_EHCI_FSL=y
-  FILES:=$(LINUX_DIR)/drivers/usb/host/fsl-mph-dr-of.ko
-  AUTOLOAD:=$(call AutoLoad,39,fsl-mph-dr-of,1)
+define KernelPackage/usb-bcma
+  TITLE:=Support for BCMA USB controllers
+  DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx||TARGET_bcm53xx
+  HIDDEN:=1
+  KCONFIG:=CONFIG_USB_HCD_BCMA
+  FILES:= \
+	$(if $(CONFIG_USB_HCD_BCMA),$(LINUX_DIR)/drivers/usb/host/bcma-hcd.ko)
+  AUTOLOAD:=$(call AutoLoad,19,$(if $(CONFIG_USB_HCD_BCMA),bcma-hcd),1)
   $(call AddDepends/usb)
 endef
+$(eval $(call KernelPackage,usb-bcma))
 
-define KernelPackage/usb2-fsl/description
- Kernel support for Freescale USB2 (EHCI) controllers
+define KernelPackage/usb-fotg210
+  TITLE:=Support for FOTG210 USB host controllers
+  DEPENDS:=@USB_SUPPORT @TARGET_gemini
+  KCONFIG:=CONFIG_USB_FOTG210_HCD
+  FILES:= \
+	$(if $(CONFIG_USB_FOTG210_HCD),$(LINUX_DIR)/drivers/usb/host/fotg210-hcd.ko)
+  AUTOLOAD:=$(call AutoLoad,50,fotg210-hcd,1)
+  $(call AddDepends/usb)
 endef
+$(eval $(call KernelPackage,usb-fotg210))
 
-$(eval $(call KernelPackage,usb2-fsl))
-
-
-define KernelPackage/usb2-omap
-  TITLE:=Support for USB2 for OMAP
-  DEPENDS:=@TARGET_omap +kmod-usb-phy-nop +kmod-usb-phy-am335x +kmod-usb2
-  KCONFIG:=CONFIG_USB_EHCI_HCD_OMAP
-  FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-omap.ko
-  AUTOLOAD:=$(call AutoLoad,39,ehci-omap)
+define KernelPackage/usb-ssb
+  TITLE:=Support for SSB USB controllers
+  DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx
+  HIDDEN:=1
+  KCONFIG:=CONFIG_USB_HCD_SSB
+  FILES:= \
+	$(if $(CONFIG_USB_HCD_SSB),$(LINUX_DIR)/drivers/usb/host/ssb-hcd.ko)
+  AUTOLOAD:=$(call AutoLoad,19,$(if $(CONFIG_USB_HCD_SSB),ssb-hcd),1)
   $(call AddDepends/usb)
 endef
+$(eval $(call KernelPackage,usb-ssb))
 
-define KernelPackage/usb2-omap/description
- Kernel support for OMAP USB2 (EHCI) controllers
+define KernelPackage/usb-ehci
+  TITLE:=EHCI controller support
+  HIDDEN:=1
+  KCONFIG:= \
+	CONFIG_USB_EHCI_HCD
+  FILES:= \
+	$(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko
+  AUTOLOAD:=$(call AutoLoad,35,ehci-hcd,1)
+  $(call AddDepends/usb)
 endef
-
-$(eval $(call KernelPackage,usb2-omap))
-
+$(eval $(call KernelPackage,usb-ehci))
 
 define KernelPackage/usb2
   TITLE:=Support for USB2 controllers
   DEPENDS:=\
-	+TARGET_brcm47xx:kmod-usb-brcm47xx \
-	+TARGET_mpc85xx:kmod-usb2-fsl
+	+TARGET_brcm47xx:kmod-usb-bcma \
+	+TARGET_brcm47xx:kmod-usb-ssb \
+	+TARGET_bcm53xx:kmod-usb-bcma \
+	+TARGET_bcm53xx:kmod-phy-bcm-ns-usb2 \
+	+TARGET_ath79:kmod-phy-ath79-usb \
+	+kmod-usb-ehci
   KCONFIG:=\
-	CONFIG_USB_EHCI_HCD \
-	CONFIG_USB_EHCI_ATH79=y \
+	CONFIG_USB_EHCI_HCD_PLATFORM \
 	CONFIG_USB_EHCI_BCM63XX=y \
 	CONFIG_USB_IMX21_HCD=y \
 	CONFIG_USB_EHCI_MXC=y \
 	CONFIG_USB_OCTEON_EHCI=y \
 	CONFIG_USB_EHCI_HCD_ORION=y \
-	CONFIG_USB_EHCI_HCD_PLATFORM=y
+	CONFIG_USB_EHCI_HCD_AT91=y \
+	CONFIG_USB_EHCI_FSL
   FILES:= \
-	$(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko \
 	$(LINUX_DIR)/drivers/usb/host/ehci-platform.ko
   ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-orion.ko),)
     FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-orion.ko
   endif
-  AUTOLOAD:=$(call AutoLoad,40,ehci-hcd ehci-platform ehci-orion,1)
+  ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-atmel.ko),)
+    FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-atmel.ko
+  endif
+  AUTOLOAD:=$(call AutoLoad,40,ehci-hcd ehci-platform ehci-orion ehci-atmel,1)
   $(call AddDepends/usb)
 endef
 
@@ -436,7 +393,9 @@ $(eval $(call KernelPackage,usb2))
 define KernelPackage/usb2-pci
   TITLE:=Support for PCI USB2 controllers
   DEPENDS:=@PCI_SUPPORT +kmod-usb2
-  KCONFIG:=CONFIG_USB_EHCI_PCI
+  KCONFIG:= \
+	CONFIG_USB_PCI=y \
+	CONFIG_USB_EHCI_PCI
   FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-pci.ko
   AUTOLOAD:=$(call AutoLoad,42,ehci-pci,1)
   $(call AddDepends/usb)
@@ -451,18 +410,20 @@ $(eval $(call KernelPackage,usb2-pci))
 
 define KernelPackage/usb-dwc2
   TITLE:=DWC2 USB controller driver
-  DEPENDS:=@!LINUX_3_10 +(TARGET_brcm2708||TARGET_at91||TARGET_brcm63xx||TARGET_mxs):kmod-usb-gadget
+  DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget
   KCONFIG:= \
+	CONFIG_USB_PCI=y \
 	CONFIG_USB_DWC2 \
 	CONFIG_USB_DWC2_PCI \
 	CONFIG_USB_DWC2_PLATFORM \
 	CONFIG_USB_DWC2_DEBUG=n \
 	CONFIG_USB_DWC2_VERBOSE=n \
-	CONFIG_USB_DWC2_TRACK_MISSED_SOFS=n
+	CONFIG_USB_DWC2_TRACK_MISSED_SOFS=n \
+	CONFIG_USB_DWC2_DEBUG_PERIODIC=n
   FILES:= \
 	$(LINUX_DIR)/drivers/usb/dwc2/dwc2.ko \
-	$(LINUX_DIR)/drivers/usb/dwc2/dwc2_platform.ko
-  AUTOLOAD:=$(call AutoLoad,54,dwc2 dwc2_platform,1)
+	$(LINUX_DIR)/drivers/usb/dwc2/dwc2_platform.ko@lt4.3
+  AUTOLOAD:=$(call AutoLoad,54,dwc2 dwc2_platform@lt4.3,1)
   $(call AddDepends/usb)
 endef
 
@@ -474,22 +435,44 @@ endef
 $(eval $(call KernelPackage,usb-dwc2))
 
 
-define KernelPackage/usb2-oxnas
-  TITLE:=OXNAS USB controller driver
-  DEPENDS:=@TARGET_oxnas +kmod-usb2
-  KCONFIG:=CONFIG_USB_EHCI_OXNAS
-  FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-oxnas.ko
-  AUTOLOAD:=$(call AutoLoad,55,ehci-oxnas,1)
+define KernelPackage/usb-dwc3
+  TITLE:=DWC3 USB controller driver
+  KCONFIG:= \
+	CONFIG_USB_DWC3 \
+	CONFIG_USB_DWC3_HOST=y \
+	CONFIG_USB_DWC3_GADGET=n \
+	CONFIG_USB_DWC3_DUAL_ROLE=n \
+	CONFIG_USB_DWC3_DEBUG=n \
+	CONFIG_USB_DWC3_VERBOSE=n
+  FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3.ko
+  AUTOLOAD:=$(call AutoLoad,54,dwc3,1)
   $(call AddDepends/usb)
 endef
 
-define KernelPackage/usb2-oxnas/description
- This driver provides USB Device Controller support for the
- EHCI USB host built-in to the PLXTECH NAS782x SoC
+define KernelPackage/usb-dwc3/description
+ This driver provides support for the Dual Role SuperSpeed
+ USB Controller based on the Synopsys DesignWare USB3 IP Core
+endef
+
+$(eval $(call KernelPackage,usb-dwc3))
+
+
+define KernelPackage/usb-dwc3-of-simple
+  TITLE:=DWC3 USB simple OF driver
+  DEPENDS:=@TARGET_ipq40xx||@TARGET_ipq806x +kmod-usb-dwc3
+  KCONFIG:= CONFIG_USB_DWC3_OF_SIMPLE
+  FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-of-simple.ko
+  AUTOLOAD:=$(call AutoLoad,53,dwc3-of-simple,1)
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-dwc3-of-simple/description
+ This driver provides generic platform glue for the integrated DesignWare
+ USB3 IP Core.
 endef
 
-$(eval $(call KernelPackage,usb2-oxnas))
 
+$(eval $(call KernelPackage,usb-dwc3-of-simple))
 
 define KernelPackage/usb-acm
   TITLE:=Support for modems/isdn controllers
@@ -526,21 +509,14 @@ define KernelPackage/usb-audio
   TITLE:=Support for USB audio devices
   KCONFIG:= \
 	CONFIG_USB_AUDIO \
+	CONFIG_SND_USB=y \
 	CONFIG_SND_USB_AUDIO
   $(call AddDepends/usb)
   $(call AddDepends/sound)
-# For Linux 2.6.35+
-ifneq ($(wildcard $(LINUX_DIR)/sound/usb/snd-usbmidi-lib.ko),)
   FILES:= \
 	$(LINUX_DIR)/sound/usb/snd-usbmidi-lib.ko \
 	$(LINUX_DIR)/sound/usb/snd-usb-audio.ko
   AUTOLOAD:=$(call AutoProbe,snd-usbmidi-lib snd-usb-audio)
-else
-  FILES:= \
-	$(LINUX_DIR)/sound/usb/snd-usb-lib.ko \
-	$(LINUX_DIR)/sound/usb/snd-usb-audio.ko
-  AUTOLOAD:=$(call AutoProbe,snd-usb-lib snd-usb-audio)
-endif
 endef
 
 define KernelPackage/usb-audio/description
@@ -616,6 +592,38 @@ endef
 $(eval $(call KernelPackage,usb-serial-ch341))
 
 
+define KernelPackage/usb-serial-edgeport
+  TITLE:=Support for Digi Edgeport devices
+  KCONFIG:=CONFIG_USB_SERIAL_EDGEPORT
+  FILES:=$(LINUX_DIR)/drivers/usb/serial/io_edgeport.ko
+  AUTOLOAD:=$(call AutoProbe,io_edgeport)
+  $(call AddDepends/usb-serial)
+  DEPENDS+=+edgeport-firmware
+endef
+
+define KernelPackage/usb-serial-edgeport/description
+ Kernel support for Inside Out Networks (Digi)
+	Edgeport/4
+	Rapidport/4
+	Edgeport/4t
+	Edgeport/2
+	Edgeport/4i
+	Edgeport/2i
+	Edgeport/421
+	Edgeport/21
+	Edgeport/8
+	Edgeport/8 Dual
+	Edgeport/2D8
+	Edgeport/4D8
+	Edgeport/8i
+	Edgeport/2 DIN
+	Edgeport/4 DIN
+	Edgeport/16 Dual
+endef
+
+$(eval $(call KernelPackage,usb-serial-edgeport))
+
+
 define KernelPackage/usb-serial-ftdi
   TITLE:=Support for FTDI devices
   KCONFIG:=CONFIG_USB_SERIAL_FTDI_SIO
@@ -646,6 +654,34 @@ endef
 $(eval $(call KernelPackage,usb-serial-garmin))
 
 
+define KernelPackage/usb-serial-simple
+  TITLE:=USB Serial Simple (Motorola phone)
+  KCONFIG:=CONFIG_USB_SERIAL_SIMPLE
+  FILES:=$(LINUX_DIR)/drivers/usb/serial/usb-serial-simple.ko
+  AUTOLOAD:=$(call AutoProbe,usb-serial-simple)
+  $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-simple/description
+  Kernel support for "very simple devices".
+
+Specifically, it supports:
+	- Suunto ANT+ USB device.
+	- Medtronic CareLink USB device (3.18)
+	- Fundamental Software dongle.
+	- Google USB serial devices (3.19)
+	- HP4x calculators
+	- a number of Motorola phones
+	- Novatel Wireless GPS receivers (3.18)
+	- Siemens USB/MPI adapter.
+	- ViVOtech ViVOpay USB device.
+	- Infineon Modem Flashloader USB interface
+	- ZIO Motherboard USB serial interface
+endef
+
+$(eval $(call KernelPackage,usb-serial-simple))
+
+
 define KernelPackage/usb-serial-ti-usb
   TITLE:=Support for TI USB 3410/5052
   KCONFIG:=CONFIG_USB_SERIAL_TI
@@ -702,6 +738,21 @@ endef
 $(eval $(call KernelPackage,usb-serial-mos7720))
 
 
+define KernelPackage/usb-serial-mos7840
+  TITLE:=Support for Moschip MOS7840 devices
+  KCONFIG:=CONFIG_USB_SERIAL_MOS7840
+  FILES:=$(LINUX_DIR)/drivers/usb/serial/mos7840.ko
+  AUTOLOAD:=$(call AutoProbe,mos7840)
+  $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-mos7840/description
+ Kernel support for Moschip MOS7840 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-mos7840))
+
+
 define KernelPackage/usb-serial-pl2303
   TITLE:=Support for Prolific PL2303 devices
   KCONFIG:=CONFIG_USB_SERIAL_PL2303
@@ -777,21 +828,6 @@ endef
 $(eval $(call KernelPackage,usb-serial-sierrawireless))
 
 
-define KernelPackage/usb-serial-motorola-phone
-  TITLE:=Support for Motorola usb phone
-  KCONFIG:=CONFIG_USB_SERIAL_MOTOROLA
-  FILES:=$(LINUX_DIR)/drivers/usb/serial/moto_modem.ko
-  AUTOLOAD:=$(call AutoProbe,moto_modem)
-  $(call AddDepends/usb-serial)
-endef
-
-define KernelPackage/usb-serial-motorola-phone/description
- Kernel support for Motorola usb phone
-endef
-
-$(eval $(call KernelPackage,usb-serial-motorola-phone))
-
-
 define KernelPackage/usb-serial-visor
   TITLE:=Support for Handspring Visor devices
   KCONFIG:=CONFIG_USB_SERIAL_VISOR
@@ -956,6 +992,25 @@ endef
 $(eval $(call KernelPackage,usb-storage-extras))
 
 
+define KernelPackage/usb-storage-uas
+  SUBMENU:=$(USB_MENU)
+  TITLE:=USB Attached SCSI (UASP) support
+  DEPENDS:=+kmod-usb-storage
+  KCONFIG:=CONFIG_USB_UAS
+  FILES:=$(LINUX_DIR)/drivers/usb/storage/uas.ko
+  AUTOLOAD:=$(call AutoProbe,uas,1)
+endef
+
+define KernelPackage/usb-storage-uas/description
+ Say Y here if you want to include support for
+ USB Attached SCSI (UAS/UASP), a higher
+ performance protocol available on many
+ newer USB 3.0 storage devices
+endef
+
+$(eval $(call KernelPackage,usb-storage-uas))
+
+
 define KernelPackage/usb-atm
   TITLE:=Support for ATM on USB bus
   DEPENDS:=+kmod-atm
@@ -1027,7 +1082,7 @@ define KernelPackage/usb-net
   TITLE:=Kernel modules for USB-to-Ethernet convertors
   DEPENDS:=+kmod-mii
   KCONFIG:=CONFIG_USB_USBNET \
-	CONFIG_USB_NET_DRIVERS@ge3.18
+	CONFIG_USB_NET_DRIVERS
   AUTOLOAD:=$(call AutoProbe,usbnet)
   FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/usbnet.ko
   $(call AddDepends/usb)
@@ -1232,6 +1287,51 @@ endef
 $(eval $(call KernelPackage,usb-net-qmi-wwan))
 
 
+define KernelPackage/usb-net-rtl8150
+  TITLE:=Kernel module for USB-to-Ethernet Realtek convertors
+  KCONFIG:=CONFIG_USB_RTL8150
+  FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/rtl8150.ko
+  AUTOLOAD:=$(call AutoProbe,rtl8150)
+  $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-rtl8150/description
+ Kernel module for USB-to-Ethernet Realtek 8150 convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-rtl8150))
+
+
+define KernelPackage/usb-net-rtl8152
+  TITLE:=Kernel module for USB-to-Ethernet Realtek convertors
+  KCONFIG:=CONFIG_USB_RTL8152
+  FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/r8152.ko
+  AUTOLOAD:=$(call AutoProbe,r8152)
+  $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-rtl8152/description
+ Kernel module for USB-to-Ethernet Realtek 8152 USB2.0/3.0 convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-rtl8152))
+
+
+define KernelPackage/usb-net-sr9700
+  TITLE:=Support for CoreChip SR9700 ethernet devices
+  KCONFIG:=CONFIG_USB_NET_SR9700
+  FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/sr9700.ko
+  AUTOLOAD:=$(call AutoProbe,sr9700)
+  $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-sr9700/description
+ Kernel module for CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices
+endef
+
+$(eval $(call KernelPackage,usb-net-sr9700))
+
+
 define KernelPackage/usb-net-rndis
   TITLE:=Support for RNDIS connections
   KCONFIG:=CONFIG_USB_NET_RNDIS_HOST
@@ -1284,7 +1384,7 @@ define KernelPackage/usb-net-huawei-cdc-ncm
   KCONFIG:=CONFIG_USB_NET_HUAWEI_CDC_NCM
   FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/huawei_cdc_ncm.ko
   AUTOLOAD:=$(call AutoProbe,huawei_cdc_ncm)
-  $(call AddDepends/usb-net,+kmod-usb-net-cdc-ncm +kmod-usb-wdm @!LINUX_3_10)
+  $(call AddDepends/usb-net,+kmod-usb-net-cdc-ncm +kmod-usb-wdm)
 endef
 
 define KernelPackage/usb-net-huawei-cdc-ncm/description
@@ -1338,6 +1438,19 @@ endef
 
 $(eval $(call KernelPackage,usb-net-kalmia))
 
+define KernelPackage/usb-net-pl
+  TITLE:=Prolific PL-2301/2302/25A1 based cables
+  KCONFIG:=CONFIG_USB_NET_PLUSB
+  FILES:=$(LINUX_DIR)/drivers/net/usb/plusb.ko
+  AUTOLOAD:=$(call AutoProbe,plusb)
+  $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-pl/description
+ Kernel support for Prolific PL-2301/2302/25A1 based cables
+endef
+
+$(eval $(call KernelPackage,usb-net-pl))
 
 define KernelPackage/usb-hid
   TITLE:=Support for USB Human Input Devices
@@ -1407,9 +1520,7 @@ define KernelPackage/usbip
   KCONFIG:= \
 	CONFIG_USBIP_CORE \
 	CONFIG_USBIP_DEBUG=n
-  FILES:= \
-	$(LINUX_DIR)/drivers/staging/usbip/usbip-core.ko@lt3.17 \
-	$(LINUX_DIR)/drivers/usb/usbip/usbip-core.ko@ge3.17
+  FILES:=$(LINUX_DIR)/drivers/usb/usbip/usbip-core.ko
   AUTOLOAD:=$(call AutoProbe,usbip-core)
   $(call AddDepends/usb)
 endef
@@ -1421,9 +1532,7 @@ define KernelPackage/usbip-client
   TITLE := USB-over-IP client driver
   DEPENDS := +kmod-usbip
   KCONFIG := CONFIG_USBIP_VHCI_HCD
-  FILES := \
-	$(LINUX_DIR)/drivers/staging/usbip/vhci-hcd.ko@lt3.17 \
-	$(LINUX_DIR)/drivers/usb/usbip/vhci-hcd.ko@ge3.17
+  FILES :=$(LINUX_DIR)/drivers/usb/usbip/vhci-hcd.ko
   AUTOLOAD := $(call AutoProbe,vhci-hcd)
   $(call AddDepends/usb)
 endef
@@ -1436,9 +1545,7 @@ $(call KernelPackage/usbip/Default)
   TITLE := USB-over-IP host driver
   DEPENDS := +kmod-usbip
   KCONFIG := CONFIG_USBIP_HOST
-  FILES := \
-	$(LINUX_DIR)/drivers/staging/usbip/usbip-host.ko@lt3.17 \
-	$(LINUX_DIR)/drivers/usb/usbip/usbip-host.ko@ge3.17
+  FILES :=$(LINUX_DIR)/drivers/usb/usbip/usbip-host.ko
   AUTOLOAD := $(call AutoProbe,usbip-host)
   $(call AddDepends/usb)
 endef
@@ -1446,44 +1553,53 @@ endef
 $(eval $(call KernelPackage,usbip-server))
 
 
-define KernelPackage/usb-chipidea-imx
-  TITLE:=Support for ChipIdea controllers
-  DEPENDS:=@TARGET_imx6||TARGET_mxs +kmod-usb2 +USB_GADGET_SUPPORT:kmod-usb-gadget
-  KCONFIG:=\
+define KernelPackage/usb-chipidea
+  TITLE:=Host and device support for Chipidea controllers
+  DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget @TARGET_ar71xx||TARGET_ath79 +kmod-usb-ehci +kmod-usb-phy-nop
+  KCONFIG:= \
+	CONFIG_EXTCON \
 	CONFIG_USB_CHIPIDEA \
 	CONFIG_USB_CHIPIDEA_HOST=y \
 	CONFIG_USB_CHIPIDEA_UDC=y \
 	CONFIG_USB_CHIPIDEA_DEBUG=y
-  FILES:=\
+  FILES:= \
+	$(LINUX_DIR)/drivers/extcon/extcon.ko@lt4.9 \
+	$(LINUX_DIR)/drivers/extcon/extcon-core.ko@ge4.9 \
 	$(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc.ko \
-	$(if $(CONFIG_OF),$(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc_imx.ko) \
-	$(if $(CONFIG_OF),$(LINUX_DIR)/drivers/usb/chipidea/usbmisc_imx.ko)
-  AUTOLOAD:=$(call AutoLoad,51,ci_hdrc $(if $(CONFIG_OF),ci_hdrc_imx usbmisc_imx),1)
+	$(LINUX_DIR)/drivers/usb/common/ulpi.ko@ge4.18
+  AUTOLOAD:=$(call AutoLoad,39,ci_hdrc,1)
   $(call AddDepends/usb)
 endef
 
-define KernelPackage/usb-chipidea-imx/description
- Kernel support for USB ChipIdea controllers
+define KernelPackage/usb-chipidea/description
+ Kernel support for USB Chipidea controllers
 endef
 
-$(eval $(call KernelPackage,usb-chipidea-imx,1))
+$(eval $(call KernelPackage,usb-chipidea))
 
 
-define KernelPackage/usb-mxs-phy
-  TITLE:=Support for Freescale MXS USB PHY
-  DEPENDS:=@TARGET_imx6||TARGET_mxs +TARGET_mxs:kmod-usb-chipidea-imx
-  KCONFIG:=CONFIG_USB_MXS_PHY
-  FILES:=\
-	$(LINUX_DIR)/drivers/usb/phy/phy-mxs-usb.ko
-  AUTOLOAD:=$(call AutoLoad,52,phy-mxs-usb,1)
+define KernelPackage/usb-chipidea2
+  TITLE:=Host and device support for Chipidea2 controllers
+  DEPENDS:=+kmod-usb-chipidea
+  KCONFIG:= \
+	CONFIG_EXTCON \
+	CONFIG_USB_CHIPIDEA \
+	CONFIG_USB_CHIPIDEA_HOST=y \
+	CONFIG_USB_CHIPIDEA_UDC=y \
+	CONFIG_USB_CHIPIDEA_DEBUG=y
+  FILES:= \
+	$(LINUX_DIR)/drivers/extcon/extcon.ko@lt4.9 \
+	$(LINUX_DIR)/drivers/extcon/extcon-core.ko@ge4.9 \
+	$(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc_usb2.ko
+  AUTOLOAD:=$(call AutoLoad,39,ci_hdrc_usb2,1)
   $(call AddDepends/usb)
 endef
 
-define KernelPackage/usb-mxs-phy/description
- Kernel support for Freescale MXS USB PHY
+define KernelPackage/usb-chipidea2/description
+ Kernel support for USB Chipidea controllers
 endef
 
-$(eval $(call KernelPackage,usb-mxs-phy,1))
+$(eval $(call KernelPackage,usb-chipidea2))
 
 
 define KernelPackage/usbmon
@@ -1500,17 +1616,25 @@ endef
 
 $(eval $(call KernelPackage,usbmon))
 
-XHCI_FILES := $(wildcard $(patsubst %,$(LINUX_DIR)/drivers/usb/host/%.ko,xhci-hcd xhci-pci xhci-plat-hcd))
+XHCI_MODULES := xhci-hcd xhci-pci xhci-plat-hcd
+ifdef CONFIG_TARGET_ramips_mt7621
+  XHCI_MODULES += xhci-mtk
+endif
+XHCI_FILES := $(wildcard $(patsubst %,$(LINUX_DIR)/drivers/usb/host/%.ko,$(XHCI_MODULES)))
 XHCI_AUTOLOAD := $(patsubst $(LINUX_DIR)/drivers/usb/host/%.ko,%,$(XHCI_FILES))
 
 define KernelPackage/usb3
   TITLE:=Support for USB3 controllers
-  DEPENDS:=+TARGET_omap:kmod-usb-phy-omap-usb3
+  DEPENDS:= \
+	+TARGET_bcm53xx:kmod-usb-bcma \
+	+TARGET_bcm53xx:kmod-phy-bcm-ns-usb3
   KCONFIG:= \
+	CONFIG_USB_PCI=y \
 	CONFIG_USB_XHCI_HCD \
 	CONFIG_USB_XHCI_PCI \
 	CONFIG_USB_XHCI_PLATFORM \
 	CONFIG_USB_XHCI_MVEBU=y \
+	CONFIG_USB_XHCI_MTK \
 	CONFIG_USB_XHCI_HCD_DEBUGGING=n
   FILES:= \
 	$(XHCI_FILES)
@@ -1523,3 +1647,38 @@ define KernelPackage/usb3/description
 endef
 
 $(eval $(call KernelPackage,usb3))
+
+
+define KernelPackage/usb-net2280
+  TITLE:=Support for NetChip 228x PCI USB peripheral controller
+  KCONFIG:= \
+	CONFIG_USB_PCI=y \
+	CONFIG_USB_NET2280
+  DEPENDS:=@PCI_SUPPORT +kmod-usb-gadget
+  FILES:=$(LINUX_DIR)/drivers/usb/gadget/udc/net2280.ko
+  AUTOLOAD:=$(call AutoLoad,46,net2280)
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-net2280/description
+  Kernel support for NetChip 228x / PLX USB338x PCI USB peripheral controller.
+endef
+
+$(eval $(call KernelPackage,usb-net2280))
+
+define KernelPackage/chaoskey
+  SUBMENU:=$(USB_MENU)
+  TITLE:=Chaoskey hardware RNG support
+  DEPENDS:=+kmod-random-core
+  KCONFIG:=CONFIG_USB_CHAOSKEY
+  FILES:=$(LINUX_DIR)/drivers/usb/misc/chaoskey.ko
+  AUTOLOAD:=$(call AutoProbe,chaoskey)
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/chaoskey/description
+  Kernel module for chaoskey, USB attached true random number generator
+endef
+
+$(eval $(call KernelPackage,chaoskey))
+