X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=package%2Fkernel%2Fmac80211%2Ffiles%2Flib%2Fnetifd%2Fwireless%2Fmac80211.sh;h=e9389e34477b9cf4f90c4c61994c121abdaaebaf;hp=9526300379194e5e8347ef4e575e883124e8ede3;hb=dd3214f95d3557fc4c8dc794620149f4e3f4d2e8;hpb=a0cc6803c8c78dba5bdc0f2b6b6c5031f3c08132 diff --git a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh index 9526300379..e9389e3447 100644 --- a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh +++ b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh @@ -14,6 +14,10 @@ MP_CONFIG_INT="mesh_retry_timeout mesh_confirm_timeout mesh_holding_timeout mesh MP_CONFIG_BOOL="mesh_auto_open_plinks mesh_fwding" MP_CONFIG_STRING="mesh_power_mode" +iw() { + command iw $@ || logger -t mac80211 "Failed command: iw $@" +} + drv_mac80211_init_device_config() { hostapd_common_add_device_config @@ -21,8 +25,9 @@ drv_mac80211_init_device_config() { config_add_string hwmode config_add_int beacon_int chanbw frag rts config_add_int rxantenna txantenna antenna_gain txpower distance - config_add_boolean noscan + config_add_boolean noscan ht_coex config_add_array ht_capab + config_add_array channels config_add_boolean \ rxldpc \ short_gi_80 \ @@ -55,6 +60,7 @@ drv_mac80211_init_iface_config() { config_add_int maxassoc config_add_int max_listen_int config_add_int dtim_period + config_add_int start_disabled # mesh config_add_string mesh_id @@ -88,8 +94,9 @@ mac80211_hostapd_setup_base() { json_select config [ "$auto_channel" -gt 0 ] && channel=acs_survey + [ "$auto_channel" -gt 0 ] && json_get_values channel_list channels - json_get_vars noscan + json_get_vars noscan ht_coex json_get_values ht_capab_list ht_capab ieee80211n=1 @@ -126,6 +133,9 @@ mac80211_hostapd_setup_base() { [ -n "$ieee80211n" ] && { append base_cfg "ieee80211n=1" "$N" + set_default ht_coex 0 + append base_cfg "ht_coex=$ht_coex" "$N" + json_get_vars \ ldpc:1 \ greenfield:0 \ @@ -214,7 +224,6 @@ mac80211_hostapd_setup_base() { vht_max_a_mpdu_len_exp:7 \ vht_max_mpdu:11454 \ rx_stbc:4 \ - tx_stbc:4 \ vht_link_adapt:3 \ vht160:2 @@ -226,13 +235,13 @@ mac80211_hostapd_setup_base() { cap_rx_stbc=$((($vht_cap >> 8) & 7)) [ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc" - ht_cap_mask="$(( ($vht_cap & ~(0x700)) | ($cap_rx_stbc << 8) ))" + vht_cap="$(( ($vht_cap & ~(0x700)) | ($cap_rx_stbc << 8) ))" mac80211_add_capabilities vht_capab $vht_cap \ RXLDPC:0x10::$rxldpc \ SHORT-GI-80:0x20::$short_gi_80 \ SHORT-GI-160:0x40::$short_gi_160 \ - TX-STBC-2BY1:0x80::$tx_stbc \ + TX-STBC-2BY1:0x80::$tx_stbc_2by1 \ SU-BEAMFORMER:0x800::$su_beamformer \ SU-BEAMFORMEE:0x1000::$su_beamformee \ MU-BEAMFORMER:0x80000::$mu_beamformer \ @@ -241,10 +250,10 @@ mac80211_hostapd_setup_base() { HTC-VHT:0x400000::$htc_vht \ RX-ANTENNA-PATTERN:0x10000000::$rx_antenna_pattern \ TX-ANTENNA-PATTERN:0x20000000::$tx_antenna_pattern \ - RX-STBC1:0x700:0x100:1 \ - RX-STBC12:0x700:0x200:1 \ - RX-STBC123:0x700:0x300:1 \ - RX-STBC1234:0x700:0x400:1 \ + RX-STBC-1:0x700:0x100:1 \ + RX-STBC-12:0x700:0x200:1 \ + RX-STBC-123:0x700:0x300:1 \ + RX-STBC-1234:0x700:0x400:1 \ # supported Channel widths vht160_hw=0 @@ -263,7 +272,7 @@ mac80211_hostapd_setup_base() { vht_max_mpdu_hw=11454 [ "$vht_max_mpdu_hw" != 3895 ] && \ vht_capab="$vht_capab[MAX-MPDU-$vht_max_mpdu_hw]" - + # maximum A-MPDU length exponent vht_max_a_mpdu_len_exp_hw=0 [ "$(($vht_cap & 58720256))" -ge 8388608 -a 1 -le "$vht_max_a_mpdu_len_exp" ] && \ @@ -297,6 +306,7 @@ mac80211_hostapd_setup_base() { hostapd_prepare_device_config "$hostapd_conf_file" nl80211 cat >> "$hostapd_conf_file" <> /var/run/hostapd-$phy.conf </dev/null); do + case "$(readlink -f /sys/class/ieee80211/$phy/device)" in + *$path) return 0;; + esac done } [ -n "$macaddr" ] && { @@ -405,6 +415,34 @@ mac80211_check_ap() { has_ap=1 } +mac80211_iw_interface_add() { + local phy="$1" + local ifname="$2" + local type="$3" + local wdsflag="$4" + local rc + + iw phy "$phy" interface add "$ifname" type "$type" $wdsflag + rc="$?" + + [ "$rc" = 233 ] && { + # Device might have just been deleted, give the kernel some time to finish cleaning it up + sleep 1 + + iw phy "$phy" interface add "$ifname" type "$type" $wdsflag + rc="$?" + } + + [ "$rc" = 233 ] && { + # Device might not support virtual interfaces, so the interface never got deleted in the first place. + # Check if the interface already exists, and avoid failing in this case. + ip link show dev "$ifname" >/dev/null 2>/dev/null && rc=0 + } + + [ "$rc" != 0 ] && wireless_setup_failed INTERFACE_CREATION_FAILED + return $rc +} + mac80211_prepare_vif() { json_select config @@ -431,7 +469,7 @@ mac80211_prepare_vif() { # It is far easier to delete and create the desired interface case "$mode" in adhoc) - iw phy "$phy" interface add "$ifname" type adhoc + mac80211_iw_interface_add "$phy" "$ifname" adhoc || return ;; ap) # Hostapd will handle recreating the interface and @@ -445,26 +483,21 @@ mac80211_prepare_vif() { mac80211_hostapd_setup_bss "$phy" "$ifname" "$macaddr" "$type" || return [ -n "$hostapd_ctrl" ] || { - iw phy "$phy" interface add "$ifname" type managed + mac80211_iw_interface_add "$phy" "$ifname" __ap || return hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd/$ifname}" } ;; mesh) - json_get_vars key mesh_id - if [ -n "$key" ]; then - iw phy "$phy" interface add "$ifname" type mp - else - iw phy "$phy" interface add "$ifname" type mp mesh_id "$mesh_id" - fi + mac80211_iw_interface_add "$phy" "$ifname" mp || return ;; monitor) - iw phy "$phy" interface add "$ifname" type monitor + mac80211_iw_interface_add "$phy" "$ifname" monitor || return ;; sta) local wdsflag= staidx="$(($staidx + 1))" [ "$wds" -gt 0 ] && wdsflag="4addr on" - iw phy "$phy" interface add "$ifname" type managed $wdsflag + mac80211_iw_interface_add "$phy" "$ifname" managed "$wdsflag" || return [ "$powersave" -gt 0 ] && powersave="on" || powersave="off" iw "$ifname" set power_save "$powersave" ;; @@ -481,7 +514,7 @@ mac80211_prepare_vif() { # All interfaces must have unique mac addresses # which can either be explicitly set in the device # section, or automatically generated - ifconfig "$ifname" hw ether "$macaddr" + ip link set dev "$ifname" address "$macaddr" fi json_select .. @@ -489,14 +522,24 @@ mac80211_prepare_vif() { mac80211_setup_supplicant() { wpa_supplicant_prepare_interface "$ifname" nl80211 || return 1 - wpa_supplicant_add_network "$ifname" + if [ "$mode" = "sta" ]; then + wpa_supplicant_add_network "$ifname" + else + wpa_supplicant_add_network "$ifname" "$freq" "$htmode" "$noscan" + fi wpa_supplicant_run "$ifname" ${hostapd_ctrl:+-H $hostapd_ctrl} } +mac80211_setup_supplicant_noctl() { + wpa_supplicant_prepare_interface "$ifname" nl80211 || return 1 + wpa_supplicant_add_network "$ifname" "$freq" "$htmode" "$noscan" + wpa_supplicant_run "$ifname" +} + mac80211_setup_adhoc_htmode() { case "$htmode" in VHT20|HT20) ibss_htmode=HT20;; - HT40*|VHT40|VHT80|VHT160) + HT40*|VHT40|VHT160) case "$hwmode" in a) case "$(( ($channel / 4) % 2 ))" in @@ -520,6 +563,12 @@ mac80211_setup_adhoc_htmode() { esac [ "$auto_channel" -gt 0 ] && ibss_htmode="HT40+" ;; + VHT80) + ibss_htmode="80MHZ" + ;; + NONE|NOHT) + ibss_htmode="NOHT" + ;; *) ibss_htmode="" ;; esac @@ -559,12 +608,57 @@ mac80211_setup_adhoc() { [ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate" iw dev "$ifname" ibss join "$ssid" $freq $ibss_htmode fixed-freq $bssid \ - ${beacon_int:+beacon-interval $beacon_int} \ + beacon-interval $beacon_int \ ${brstr:+basic-rates $brstr} \ ${mcval:+mcast-rate $mcval} \ ${keyspec:+keys $keyspec} } +mac80211_setup_mesh() { + json_get_vars ssid mesh_id mcast_rate + + mcval= + [ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate" + [ -n "$mesh_id" ] && ssid="$mesh_id" + + case "$htmode" in + VHT20|HT20) mesh_htmode=HT20;; + HT40*|VHT40) + case "$hwmode" in + a) + case "$(( ($channel / 4) % 2 ))" in + 1) mesh_htmode="HT40+" ;; + 0) mesh_htmode="HT40-";; + esac + ;; + *) + case "$htmode" in + HT40+) mesh_htmode="HT40+";; + HT40-) mesh_htmode="HT40-";; + *) + if [ "$channel" -lt 7 ]; then + mesh_htmode="HT40+" + else + mesh_htmode="HT40-" + fi + ;; + esac + ;; + esac + ;; + VHT80) + mesh_htmode="80Mhz" + ;; + VHT160) + mesh_htmode="160Mhz" + ;; + *) mesh_htmode="NOHT" ;; + esac + iw dev "$ifname" mesh join "$ssid" freq $freq $mesh_htmode \ + ${mcval:+mcast-rate $mcval} \ + beacon-interval $beacon_int +} + mac80211_setup_vif() { local name="$1" local failed @@ -577,7 +671,7 @@ mac80211_setup_vif() { json_get_vars mode json_get_var vif_txpower txpower - ifconfig "$ifname" up || { + ip link set dev "$ifname" up || { wireless_setup_vif_failed IFUP_ERROR json_select .. return @@ -588,29 +682,24 @@ mac80211_setup_vif() { case "$mode" in mesh) + wireless_vif_parse_encryption + freq="$(get_freq "$phy" "$channel")" + if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ] || chan_is_dfs "$phy" "$channel"; then + mac80211_setup_supplicant || failed=1 + else + mac80211_setup_mesh + fi for var in $MP_CONFIG_INT $MP_CONFIG_BOOL $MP_CONFIG_STRING; do json_get_var mp_val "$var" [ -n "$mp_val" ] && iw dev "$ifname" set mesh_param "$var" "$mp_val" done - - # authsae - json_get_vars key - if [ -n "$key" ]; then - if [ -e "/lib/wifi/authsae.sh" ]; then - . /lib/wifi/authsae.sh - authsae_start_interface || failed=1 - else - wireless_setup_vif_failed AUTHSAE_NOT_INSTALLED - json_select .. - return - fi - fi ;; adhoc) wireless_vif_parse_encryption mac80211_setup_adhoc_htmode if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ]; then - mac80211_setup_supplicant || failed=1 + freq="$(get_freq "$phy" "$channel")" + mac80211_setup_supplicant_noctl || failed=1 else mac80211_setup_adhoc fi @@ -630,11 +719,18 @@ get_freq() { iw "$phy" info | grep -E -m1 "(\* ${chan:-....} MHz${chan:+|\\[$chan\\]})" | grep MHz | awk '{print $2}' } +chan_is_dfs() { + local phy="$1" + local chan="$2" + iw "$phy" info | grep -E -m1 "(\* ${chan:-....} MHz${chan:+|\\[$chan\\]})" | grep -q "MHz.*radar detection" + return $! +} + mac80211_interface_cleanup() { local phy="$1" for wdev in $(list_phy_interfaces "$phy"); do - ifconfig "$wdev" down 2>/dev/null + ip link set dev "$wdev" down 2>/dev/null iw dev "$wdev" del done } @@ -650,7 +746,7 @@ drv_mac80211_setup() { country chanbw distance \ txpower antenna_gain \ rxantenna txantenna \ - frag rts beacon_int htmode + frag rts beacon_int:100 htmode json_get_values basic_rate_list basic_rate json_select .. @@ -685,11 +781,14 @@ drv_mac80211_setup() { done } - set_default rxantenna all - set_default txantenna all + set_default rxantenna 0xffffffff + set_default txantenna 0xffffffff set_default distance 0 set_default antenna_gain 0 + [ "$txantenna" = "all" ] && txantenna=0xffffffff + [ "$rxantenna" = "all" ] && rxantenna=0xffffffff + iw phy "$phy" set antenna $txantenna $rxantenna >/dev/null 2>&1 iw phy "$phy" set antenna_gain $antenna_gain iw phy "$phy" set distance "$distance" @@ -708,7 +807,7 @@ drv_mac80211_setup() { for_each_interface "ap" mac80211_prepare_vif [ -n "$hostapd_ctrl" ] && { - /usr/sbin/hostapd -P /var/run/wifi-$phy.pid -B "$hostapd_conf_file" + /usr/sbin/hostapd -s -P /var/run/wifi-$phy.pid -B "$hostapd_conf_file" ret="$?" wireless_add_process "$(cat /var/run/wifi-$phy.pid)" "/usr/sbin/hostapd" 1 [ "$ret" != 0 ] && {