X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=package%2Fnetwork%2Futils%2Fiw%2Fpatches%2F001-nl80211_h_sync.patch;h=97cf82793d9b17f4e90e837d7ed7f52f191e405b;hp=bd2cb59b723020ca22a42ecb92b63f954a76993e;hb=e6cadb215cba051464eaeba8040d8c82d524b088;hpb=67dc023f87699e56457a3ba4a97da60605042bd7 diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index bd2cb59b72..97cf82793d 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -1,46 +1,96 @@ --- a/nl80211.h +++ b/nl80211.h -@@ -657,9 +657,7 @@ - * is used during CSA period. - * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this - * command may be used with the corresponding cookie to cancel the wait -- * time if it is known that it is no longer necessary. This command is -- * also sent as an event whenever the driver has completed the off-channel -- * wait time. -+ * time if it is known that it is no longer necessary. - * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. - * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame - * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies -@@ -2358,8 +2356,8 @@ enum nl80211_commands { +@@ -52,6 +52,11 @@ + #define NL80211_MULTICAST_GROUP_NAN "nan" + #define NL80211_MULTICAST_GROUP_TESTMODE "testmode" + ++#define NL80211_EDMG_BW_CONFIG_MIN 4 ++#define NL80211_EDMG_BW_CONFIG_MAX 15 ++#define NL80211_EDMG_CHANNELS_MIN 1 ++#define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */ ++ + /** + * DOC: Station handling * - * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support. +@@ -2361,6 +2366,16 @@ enum nl80211_commands { + * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection + * functionality. * -- * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection -- * functionality. ++ * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz ++ * channel(s) that are allowed to be used for EDMG transmissions. ++ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute) ++ * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes ++ * the allowed channel bandwidth configurations. (u8 attribute) ++ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. ++ * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. - * ++ * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined -@@ -2818,7 +2816,7 @@ enum nl80211_attrs { + * @__NL80211_ATTR_AFTER_LAST: internal use +@@ -2820,6 +2835,11 @@ enum nl80211_attrs { - NL80211_ATTR_TWT_RESPONDER, + NL80211_ATTR_HE_OBSS_PD, -- NL80211_ATTR_HE_OBSS_PD, ++ NL80211_ATTR_WIPHY_EDMG_CHANNELS, ++ NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, ++ + NL80211_ATTR_WIPHY_ANTENNA_GAIN, - ++ /* add attributes here, update the policy in nl80211.c */ -@@ -3843,6 +3841,8 @@ enum nl80211_user_reg_hint_type { + __NL80211_ATTR_AFTER_LAST, +@@ -3201,6 +3221,8 @@ enum nl80211_sta_bss_param { + * sent to the station (u64, usec) + * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16) + * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station ++ * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds) ++ * of STA's association + * @__NL80211_STA_INFO_AFTER_LAST: internal + * @NL80211_STA_INFO_MAX: highest possible station info attribute + */ +@@ -3247,6 +3269,7 @@ enum nl80211_sta_info { + NL80211_STA_INFO_TX_DURATION, + NL80211_STA_INFO_AIRTIME_WEIGHT, + NL80211_STA_INFO_AIRTIME_LINK_METRIC, ++ NL80211_STA_INFO_ASSOC_AT_BOOTTIME, + + /* keep last */ + __NL80211_STA_INFO_AFTER_LAST, +@@ -3428,6 +3451,12 @@ enum nl80211_band_iftype_attr { + * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE + * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using + * attributes from &enum nl80211_band_iftype_attr ++ * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz ++ * channel(s) that are allowed to be used for EDMG transmissions. ++ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. ++ * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes ++ * the allowed channel bandwidth configurations. ++ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. + * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined + * @__NL80211_BAND_ATTR_AFTER_LAST: internal use + */ +@@ -3445,6 +3474,9 @@ enum nl80211_band_attr { + NL80211_BAND_ATTR_VHT_CAPA, + NL80211_BAND_ATTR_IFTYPE_DATA, + ++ NL80211_BAND_ATTR_EDMG_CHANNELS, ++ NL80211_BAND_ATTR_EDMG_BW_CONFIG, ++ + /* keep last */ + __NL80211_BAND_ATTR_AFTER_LAST, + NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 +@@ -3843,6 +3875,8 @@ enum nl80211_user_reg_hint_type { * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan * (on this channel or globally) * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment + * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent -+ * receiving local BSS data ++ * receiving frames destined to the local BSS * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number * currently defined * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use -@@ -3859,6 +3859,7 @@ enum nl80211_survey_info { +@@ -3859,6 +3893,7 @@ enum nl80211_survey_info { NL80211_SURVEY_INFO_TIME_TX, NL80211_SURVEY_INFO_TIME_SCAN, NL80211_SURVEY_INFO_PAD, @@ -48,30 +98,19 @@ /* keep last */ __NL80211_SURVEY_INFO_AFTER_LAST, -@@ -6495,26 +6496,4 @@ enum nl80211_peer_measurement_ftm_resp { - NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1 - }; +@@ -4543,6 +4578,7 @@ enum nl80211_txrate_gi { + * @NL80211_BAND_2GHZ: 2.4 GHz ISM band + * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) + * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) ++ * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) + * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace + * since newer kernel versions may support more bands + */ +@@ -4550,6 +4586,7 @@ enum nl80211_band { + NL80211_BAND_2GHZ, + NL80211_BAND_5GHZ, + NL80211_BAND_60GHZ, ++ NL80211_BAND_6GHZ, --/** -- * enum nl80211_obss_pd_attributes - OBSS packet detection attributes -- * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid -- * -- * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset. -- * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset. -- * -- * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal -- * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute. -- */ --enum nl80211_obss_pd_attributes { -- __NL80211_HE_OBSS_PD_ATTR_INVALID, -- -- NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET, -- NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET, -- -- /* keep last */ -- __NL80211_HE_OBSS_PD_ATTR_LAST, -- NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, --}; -- -- - #endif /* __LINUX_NL80211_H */ + NUM_NL80211_BANDS, + };