X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=package%2Fnetwork%2Futils%2Fuqmi%2Ffiles%2Flib%2Fnetifd%2Fproto%2Fqmi.sh;h=f6e964fb20b24b95db68cceb9488fafa3023b46f;hp=05b92425ad67c85a601896e9dad3f205beb53ab0;hb=f171a86d064ac3fcfff05d286becae87c2e26b5f;hpb=2e2748b05307b2abba00f0dd5dc2aaaab18d5057

diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
index 05b92425ad..f6e964fb20 100755
--- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
+++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
@@ -21,16 +21,21 @@ proto_qmi_init_config() {
 	proto_config_add_int profile
 	proto_config_add_boolean dhcpv6
 	proto_config_add_boolean autoconnect
+	proto_config_add_int plmn
+	proto_config_add_int timeout
 	proto_config_add_defaults
 }
 
 proto_qmi_setup() {
 	local interface="$1"
-
-	local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect $PROTO_DEFAULT_OPTIONS
+	local dataformat connstat
+	local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn timeout $PROTO_DEFAULT_OPTIONS
+	local ip4table ip6table
 	local cid_4 pdh_4 cid_6 pdh_6
 	local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
-	json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect $PROTO_DEFAULT_OPTIONS
+	json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn ip4table ip6table timeout $PROTO_DEFAULT_OPTIONS
+
+	[ "$timeout" = "" ] && timeout="10"
 
 	[ "$metric" = "" ] && metric="0"
 
@@ -42,6 +47,10 @@ proto_qmi_setup() {
 		proto_set_available "$interface" 0
 		return 1
 	}
+
+	[ -n "$delay" ] && sleep "$delay"
+
+	device="$(readlink -f $device)"
 	[ -c "$device" ] || {
 		echo "The specified control device does not exist"
 		proto_notify_error "$interface" NO_DEVICE
@@ -59,14 +68,21 @@ proto_qmi_setup() {
 		return 1
 	}
 
-	[ -n "$delay" ] && sleep "$delay"
-
 	while uqmi -s -d "$device" --get-pin-status | grep '"UIM uninitialized"' > /dev/null; do
-		sleep 1;
+		[ -e "$device" ] || return 1
+		if [ "$uninitialized_timeout" -lt "$timeout" ]; then
+			let uninitialized_timeout++
+			sleep 1;
+		else
+			echo "SIM not initialized"
+			proto_notify_error "$interface" SIM_NOT_INITIALIZED
+			proto_block_restart "$interface"
+			return 1
+		fi
 	done
 
 	[ -n "$pincode" ] && {
-		uqmi -s -d "$device" --verify-pin1 "$pincode" || {
+		uqmi -s -d "$device" --verify-pin1 "$pincode" > /dev/null || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" > /dev/null || {
 			echo "Unable to verify PIN"
 			proto_notify_error "$interface" PIN_FAILED
 			proto_block_restart "$interface"
@@ -74,19 +90,66 @@ proto_qmi_setup() {
 		}
 	}
 
-	uqmi -s -d "$device" --set-data-format 802.3
-	uqmi -s -d "$device" --wda-set-data-format 802.3
+	[ -n "$plmn" ] && {
+		local mcc mnc
+		if [ "$plmn" = 0 ]; then
+			mcc=0
+			mnc=0
+			echo "Setting PLMN to auto"
+		else
+			mcc=${plmn:0:3}
+			mnc=${plmn:3}
+			echo "Setting PLMN to $plmn"
+		fi
+		uqmi -s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev/null 2>&1 || {
+			echo "Unable to set PLMN"
+			proto_notify_error "$interface" PLMN_FAILED
+			proto_block_restart "$interface"
+			return 1
+		}
+	}
+
+	# Cleanup current state if any
+	uqmi -s -d "$device" --stop-network 0xffffffff --autoconnect > /dev/null 2>&1
+
+	# Set IP format
+	uqmi -s -d "$device" --set-data-format 802.3 > /dev/null 2>&1
+	uqmi -s -d "$device" --wda-set-data-format 802.3 > /dev/null 2>&1
+	dataformat="$(uqmi -s -d "$device" --wda-get-data-format)"
+
+	if [ "$dataformat" = '"raw-ip"' ]; then
+
+		[ -f /sys/class/net/$ifname/qmi/raw_ip ] || {
+			echo "Device only supports raw-ip mode but is missing this required driver attribute: /sys/class/net/$ifname/qmi/raw_ip"
+			return 1
+		}
+
+		echo "Device does not support 802.3 mode. Informing driver of raw-ip only for $ifname .."
+		echo "Y" > /sys/class/net/$ifname/qmi/raw_ip
+	fi
+
+	uqmi -s -d "$device" --sync > /dev/null 2>&1
 
 	echo "Waiting for network registration"
+	local registration_timeout=0
 	while uqmi -s -d "$device" --get-serving-system | grep '"searching"' > /dev/null; do
-		sleep 5;
+		[ -e "$device" ] || return 1
+		if [ "$registration_timeout" -lt "$timeout" ]; then
+			let registration_timeout++
+			sleep 1;
+		else
+			echo "Network registration failed"
+			proto_notify_error "$interface" NETWORK_REGISTRATION_FAILED
+			proto_block_restart "$interface"
+			return 1
+		fi
 	done
 
-	[ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes"
+	[ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" > /dev/null 2>&1
 
 	echo "Starting network $interface"
 
-	pdptype=`echo "$pdptype" | awk '{print tolower($0)}'`
+	pdptype=$(echo "$pdptype" | awk '{print tolower($0)}')
 	[ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype="ip"
 
 	if [ "$pdptype" = "ip" ]; then
@@ -97,62 +160,74 @@ proto_qmi_setup() {
 	fi
 
 	[ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
-		cid_4=`uqmi -s -d "$device" --get-client-id wds`
-		[ $? -ne 0 ] && {
+		cid_4=$(uqmi -s -d "$device" --get-client-id wds)
+		if ! [ "$cid_4" -eq "$cid_4" ] 2> /dev/null; then
 			echo "Unable to obtain client ID"
 			proto_notify_error "$interface" NO_CID
 			return 1
-		}
-
-		uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null
+		fi
 
-		# try to clear previous autoconnect state
-		uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
-			--stop-network 0xffffffff \
-			--autoconnect > /dev/null
+		uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null 2>&1
 
-		pdh_4=`uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
+		pdh_4=$(uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
 			--start-network \
 			${apn:+--apn $apn} \
 			${profile:+--profile $profile} \
 			${auth:+--auth-type $auth} \
 			${username:+--username $username} \
 			${password:+--password $password} \
-			${autoconnect:+--autoconnect}`
-		[ $? -ne 0 ] && {
+			${autoconnect:+--autoconnect})
+
+		# pdh_4 is a numeric value on success
+		if ! [ "$pdh_4" -eq "$pdh_4" ] 2> /dev/null; then
 			echo "Unable to connect IPv4"
-			uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds
+			uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds > /dev/null 2>&1
+			proto_notify_error "$interface" CALL_FAILED
+			return 1
+		fi
+
+		# Check data connection state
+		connstat=$(uqmi -s -d "$device" --get-data-status)
+		[ "$connstat" == '"connected"' ] || {
+			echo "No data link!"
+			uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds > /dev/null 2>&1
 			proto_notify_error "$interface" CALL_FAILED
 			return 1
 		}
 	}
 
 	[ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
-		cid_6=`uqmi -s -d "$device" --get-client-id wds`
-		[ $? -ne 0 ] && {
+		cid_6=$(uqmi -s -d "$device" --get-client-id wds)
+		if ! [ "$cid_6" -eq "$cid_6" ] 2> /dev/null; then
 			echo "Unable to obtain client ID"
 			proto_notify_error "$interface" NO_CID
 			return 1
-		}
-
-		uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null
+		fi
 
-		# try to clear previous autoconnect state
-		uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
-			--stop-network 0xffffffff \
-			--autoconnect > /dev/null
+		uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null 2>&1
 
-		pdh_6=`uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
+		pdh_6=$(uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
 			--start-network \
 			${apn:+--apn $apn} \
 			${profile:+--profile $profile} \
 			${auth:+--auth-type $auth} \
 			${username:+--username $username} \
 			${password:+--password $password} \
-			${autoconnect:+--autoconnect}`
-		[ $? -ne 0 ] && {
+			${autoconnect:+--autoconnect})
+
+		# pdh_6 is a numeric value on success
+		if ! [ "$pdh_6" -eq "$pdh_6" ] 2> /dev/null; then
 			echo "Unable to connect IPv6"
-			uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds
+			uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds > /dev/null 2>&1
+			proto_notify_error "$interface" CALL_FAILED
+			return 1
+		fi
+
+		# Check data connection state
+		connstat=$(uqmi -s -d "$device" --get-data-status)
+		[ "$connstat" == '"connected"' ] || {
+			echo "No data link!"
+			uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds > /dev/null 2>&1
 			proto_notify_error "$interface" CALL_FAILED
 			return 1
 		}
@@ -198,6 +273,7 @@ proto_qmi_setup() {
 			json_add_string name "${interface}_6"
 			json_add_string ifname "@$interface"
 			json_add_string proto "dhcpv6"
+			[ -n "$ip6table" ] && json_add_string ip6table "$ip6table"
 			proto_add_dynamic_defaults
 			# RFC 7278: Extend an IPv6 /64 Prefix to LAN
 			json_add_string extendprefix 1
@@ -211,6 +287,7 @@ proto_qmi_setup() {
 		json_add_string name "${interface}_4"
 		json_add_string ifname "@$interface"
 		json_add_string proto "dhcp"
+		[ -n "$ip4table" ] && json_add_string ip4table "$ip4table"
 		proto_add_dynamic_defaults
 		json_close_object
 		ubus call network add_dynamic "$(json_dump)"
@@ -225,10 +302,15 @@ qmi_wds_stop() {
 
 	uqmi -s -d "$device" --set-client-id wds,"$cid" \
 		--stop-network 0xffffffff \
-		--autoconnect > /dev/null
+		--autoconnect > /dev/null 2>&1
 
-	[ -n "$pdh" ] && uqmi -s -d "$device" --set-client-id wds,"$cid" --stop-network "$pdh"
-	uqmi -s -d "$device" --set-client-id wds,"$cid" --release-client-id wds
+	[ -n "$pdh" ] && {
+		uqmi -s -d "$device" --set-client-id wds,"$cid" \
+			--stop-network "$pdh" > /dev/null 2>&1
+	}
+
+	uqmi -s -d "$device" --set-client-id wds,"$cid" \
+		--release-client-id wds > /dev/null 2>&1
 }
 
 proto_qmi_teardown() {