X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=package%2Fnetwork%2Futils%2Fuqmi%2Ffiles%2Flib%2Fnetifd%2Fproto%2Fqmi.sh;h=f7b5f27ef67891654685898ed4d09b39e9e7cd5c;hp=9a534d4b96d7b1f82b63f6c0497834001230ee73;hb=0c9d06b5b243334123eafaf2e26a15ec2757767e;hpb=7488be701029a86259dcd297a3c665eb65bdac6e

diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
index 9a534d4b96..f7b5f27ef6 100755
--- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
+++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
@@ -22,16 +22,20 @@ proto_qmi_init_config() {
 	proto_config_add_boolean dhcpv6
 	proto_config_add_boolean autoconnect
 	proto_config_add_int plmn
+	proto_config_add_int timeout
 	proto_config_add_defaults
 }
 
 proto_qmi_setup() {
 	local interface="$1"
-	local dataformat
-	local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn $PROTO_DEFAULT_OPTIONS
+	local dataformat connstat
+	local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn timeout $PROTO_DEFAULT_OPTIONS
+	local ip4table ip6table
 	local cid_4 pdh_4 cid_6 pdh_6
 	local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
-	json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn $PROTO_DEFAULT_OPTIONS
+	json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn ip4table ip6table timeout $PROTO_DEFAULT_OPTIONS
+
+	[ "$timeout" = "" ] && timeout="10"
 
 	[ "$metric" = "" ] && metric="0"
 
@@ -44,6 +48,8 @@ proto_qmi_setup() {
 		return 1
 	}
 
+	[ -n "$delay" ] && sleep "$delay"
+
 	device="$(readlink -f $device)"
 	[ -c "$device" ] || {
 		echo "The specified control device does not exist"
@@ -62,21 +68,76 @@ proto_qmi_setup() {
 		return 1
 	}
 
-	[ -n "$delay" ] && sleep "$delay"
-
 	while uqmi -s -d "$device" --get-pin-status | grep '"UIM uninitialized"' > /dev/null; do
 		[ -e "$device" ] || return 1
-		sleep 1;
-	done
-
-	[ -n "$pincode" ] && {
-		uqmi -s -d "$device" --verify-pin1 "$pincode" || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" || {
-			echo "Unable to verify PIN"
-			proto_notify_error "$interface" PIN_FAILED
+		if [ "$uninitialized_timeout" -lt "$timeout" ]; then
+			let uninitialized_timeout++
+			sleep 1;
+		else
+			echo "SIM not initialized"
+			proto_notify_error "$interface" SIM_NOT_INITIALIZED
 			proto_block_restart "$interface"
 			return 1
+		fi
+	done
+
+	if uqmi -s -d "$device" --get-pin-status | grep '"Not supported"' > /dev/null; then
+		[ -n "$pincode" ] && {
+			uqmi -s -d "$device" --verify-pin1 "$pincode" > /dev/null || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" > /dev/null || {
+				echo "Unable to verify PIN"
+				proto_notify_error "$interface" PIN_FAILED
+				proto_block_restart "$interface"
+				return 1
+			}
 		}
-	}
+	else
+		. /usr/share/libubox/jshn.sh
+		json_load "$(uqmi -s -d "$device" --get-pin-status)"
+		json_get_var pin1_status pin1_status
+		json_get_var pin1_verify_tries pin1_verify_tries
+
+		case "$pin1_status" in
+			disabled)
+				echo "PIN verification is disabled"
+				;;
+			blocked)
+				echo "SIM locked PUK required"
+				proto_notify_error "$interface" PUK_NEEDED
+				proto_block_restart "$interface"
+				return 1
+				;;
+			not_verified)
+				[ "$pin1_verify_tries" -lt "3" ] && {
+					echo "PIN verify count value is $pin1_verify_tries this is below the limit of 3"
+					proto_notify_error "$interface" PIN_TRIES_BELOW_LIMIT
+					proto_block_restart "$interface"
+					return 1
+				}
+				if [ -n "$pincode" ]; then
+					uqmi -s -d "$device" --verify-pin1 "$pincode" > /dev/null 2>&1 || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" > /dev/null 2>&1 || {
+						echo "Unable to verify PIN"
+						proto_notify_error "$interface" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					}
+				else
+					echo "PIN not specified but required"
+					proto_notify_error "$interface" PIN_NOT_SPECIFIED
+					proto_block_restart "$interface"
+					return 1
+				fi
+				;;
+			verified)
+				echo "PIN already verified"
+				;;
+			*)
+				echo "PIN status failed ($pin1_status)"
+				proto_notify_error "$interface" PIN_STATUS_FAILED
+				proto_block_restart "$interface"
+				return 1
+			;;
+		esac
+	fi
 
 	[ -n "$plmn" ] && {
 		local mcc mnc
@@ -89,7 +150,7 @@ proto_qmi_setup() {
 			mnc=${plmn:3}
 			echo "Setting PLMN to $plmn"
 		fi
-		uqmi -s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" || {
+		uqmi -s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev/null 2>&1 || {
 			echo "Unable to set PLMN"
 			proto_notify_error "$interface" PLMN_FAILED
 			proto_block_restart "$interface"
@@ -97,8 +158,12 @@ proto_qmi_setup() {
 		}
 	}
 
-	uqmi -s -d "$device" --set-data-format 802.3
-	uqmi -s -d "$device" --wda-set-data-format 802.3
+	# Cleanup current state if any
+	uqmi -s -d "$device" --stop-network 0xffffffff --autoconnect > /dev/null 2>&1
+
+	# Set IP format
+	uqmi -s -d "$device" --set-data-format 802.3 > /dev/null 2>&1
+	uqmi -s -d "$device" --wda-set-data-format 802.3 > /dev/null 2>&1
 	dataformat="$(uqmi -s -d "$device" --wda-get-data-format)"
 
 	if [ "$dataformat" = '"raw-ip"' ]; then
@@ -112,15 +177,24 @@ proto_qmi_setup() {
 		echo "Y" > /sys/class/net/$ifname/qmi/raw_ip
 	fi
 
-	uqmi -s -d "$device" --sync
+	uqmi -s -d "$device" --sync > /dev/null 2>&1
 
 	echo "Waiting for network registration"
+	local registration_timeout=0
 	while uqmi -s -d "$device" --get-serving-system | grep '"searching"' > /dev/null; do
 		[ -e "$device" ] || return 1
-		sleep 5;
+		if [ "$registration_timeout" -lt "$timeout" ]; then
+			let registration_timeout++
+			sleep 1;
+		else
+			echo "Network registration failed"
+			proto_notify_error "$interface" NETWORK_REGISTRATION_FAILED
+			proto_block_restart "$interface"
+			return 1
+		fi
 	done
 
-	[ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes"
+	[ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" > /dev/null 2>&1
 
 	echo "Starting network $interface"
 
@@ -136,18 +210,13 @@ proto_qmi_setup() {
 
 	[ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
 		cid_4=$(uqmi -s -d "$device" --get-client-id wds)
-		[ $? -ne 0 ] && {
+		if ! [ "$cid_4" -eq "$cid_4" ] 2> /dev/null; then
 			echo "Unable to obtain client ID"
 			proto_notify_error "$interface" NO_CID
 			return 1
-		}
-
-		uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null
+		fi
 
-		# try to clear previous autoconnect state
-		uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
-			--stop-network 0xffffffff \
-			--autoconnect > /dev/null
+		uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null 2>&1
 
 		pdh_4=$(uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
 			--start-network \
@@ -157,9 +226,20 @@ proto_qmi_setup() {
 			${username:+--username $username} \
 			${password:+--password $password} \
 			${autoconnect:+--autoconnect})
-		[ $? -ne 0 ] && {
+
+		# pdh_4 is a numeric value on success
+		if ! [ "$pdh_4" -eq "$pdh_4" ] 2> /dev/null; then
 			echo "Unable to connect IPv4"
-			uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds
+			uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds > /dev/null 2>&1
+			proto_notify_error "$interface" CALL_FAILED
+			return 1
+		fi
+
+		# Check data connection state
+		connstat=$(uqmi -s -d "$device" --get-data-status)
+		[ "$connstat" == '"connected"' ] || {
+			echo "No data link!"
+			uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds > /dev/null 2>&1
 			proto_notify_error "$interface" CALL_FAILED
 			return 1
 		}
@@ -167,18 +247,13 @@ proto_qmi_setup() {
 
 	[ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
 		cid_6=$(uqmi -s -d "$device" --get-client-id wds)
-		[ $? -ne 0 ] && {
+		if ! [ "$cid_6" -eq "$cid_6" ] 2> /dev/null; then
 			echo "Unable to obtain client ID"
 			proto_notify_error "$interface" NO_CID
 			return 1
-		}
-
-		uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null
+		fi
 
-		# try to clear previous autoconnect state
-		uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
-			--stop-network 0xffffffff \
-			--autoconnect > /dev/null
+		uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null 2>&1
 
 		pdh_6=$(uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
 			--start-network \
@@ -188,9 +263,20 @@ proto_qmi_setup() {
 			${username:+--username $username} \
 			${password:+--password $password} \
 			${autoconnect:+--autoconnect})
-		[ $? -ne 0 ] && {
+
+		# pdh_6 is a numeric value on success
+		if ! [ "$pdh_6" -eq "$pdh_6" ] 2> /dev/null; then
 			echo "Unable to connect IPv6"
-			uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds
+			uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds > /dev/null 2>&1
+			proto_notify_error "$interface" CALL_FAILED
+			return 1
+		fi
+
+		# Check data connection state
+		connstat=$(uqmi -s -d "$device" --get-data-status)
+		[ "$connstat" == '"connected"' ] || {
+			echo "No data link!"
+			uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds > /dev/null 2>&1
 			proto_notify_error "$interface" CALL_FAILED
 			return 1
 		}
@@ -236,6 +322,7 @@ proto_qmi_setup() {
 			json_add_string name "${interface}_6"
 			json_add_string ifname "@$interface"
 			json_add_string proto "dhcpv6"
+			[ -n "$ip6table" ] && json_add_string ip6table "$ip6table"
 			proto_add_dynamic_defaults
 			# RFC 7278: Extend an IPv6 /64 Prefix to LAN
 			json_add_string extendprefix 1
@@ -249,6 +336,7 @@ proto_qmi_setup() {
 		json_add_string name "${interface}_4"
 		json_add_string ifname "@$interface"
 		json_add_string proto "dhcp"
+		[ -n "$ip4table" ] && json_add_string ip4table "$ip4table"
 		proto_add_dynamic_defaults
 		json_close_object
 		ubus call network add_dynamic "$(json_dump)"
@@ -263,10 +351,15 @@ qmi_wds_stop() {
 
 	uqmi -s -d "$device" --set-client-id wds,"$cid" \
 		--stop-network 0xffffffff \
-		--autoconnect > /dev/null
+		--autoconnect > /dev/null 2>&1
+
+	[ -n "$pdh" ] && {
+		uqmi -s -d "$device" --set-client-id wds,"$cid" \
+			--stop-network "$pdh" > /dev/null 2>&1
+	}
 
-	[ -n "$pdh" ] && uqmi -s -d "$device" --set-client-id wds,"$cid" --stop-network "$pdh"
-	uqmi -s -d "$device" --set-client-id wds,"$cid" --release-client-id wds
+	uqmi -s -d "$device" --set-client-id wds,"$cid" \
+		--release-client-id wds > /dev/null 2>&1
 }
 
 proto_qmi_teardown() {