X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Fbrcm63xx%2Fimage%2FMakefile;h=705515c88b1653b2d7549e70fb5fbdad8cf786ae;hp=303003c79372cf5ca2f114372aabd68f28a63613;hb=aa572fccb55a392323c8f708233ba1bb2f2181e3;hpb=b0ffeb0021a1a853bca7df80445652ef909f601f

diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
old mode 100644
new mode 100755
index 303003c793..705515c88b
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -1,4 +1,4 @@
-# 
+#
 # Copyright (C) 2006-2011 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
@@ -31,6 +31,8 @@ define Image/LimitName16
 $(shell expr substr "$(1)" 1 16)
 endef
 
+TARGET_DTBS:=
+
 define Image/Build/CFE
 	# Generate the tagged image
 	$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
@@ -60,6 +62,15 @@ define Image/Build/CFEHW553
 		--block-size 0x20000 --image-offset $(4)
 endef
 
+define Image/Build/CFEHW556
+	# Generate the tagged image
+	$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+	--output $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin \
+	--boardid $(2) --chipid $(3) --entry $(LOADADDR) \
+	--load-addr $(LOADADDR) --tag-version 8 --rsa-signature "$(5)" \
+	--image-offset $(4) --info1 "$(6)" --block-size 0x20000
+endef
+
 define Image/Build/CFEAGPF
 	# Generate the tagged image
 	$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
@@ -102,6 +113,20 @@ define Image/Build/SPW303V
 	rm -f $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp
 endef
 
+define Image/Build/ZyXEL
+	# Generate the tagged image
+	$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+		--output $(BIN_DIR)/openwrt-$(5)-$(1).tmp \
+		--boardid $(2) --chipid $(4) --entry $(KERNEL_ENTRY) \
+		--load-addr $(LOADADDR) --rsa-signature "$(6)" \
+		--info1 "+$(call Image/LimitName16,$(3))" --info2 $(1) \
+		$(7) $(8) $(9) $(10)
+	# Fix up header
+	$(STAGING_DIR_HOST)/bin/zyxbcm -i $(BIN_DIR)/openwrt-$(5)-$(1).tmp \
+		-o $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin
+	rm -f $(BIN_DIR)/openwrt-$(5)-$(1).tmp
+endef
+
 define Image/Build/CFEOLD
 	$(TOPDIR)/scripts/brcmImage.pl -t -p	\
 		-b $(2) -c $(3)			\
@@ -110,41 +135,88 @@ define Image/Build/CFEOLD
 		-o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
 endef
 
+define Image/Build/HCS
+	$(STAGING_DIR_HOST)/bin/hcsmakeimage --magic_byte=$(3) \
+		--rev_maj=$(4) --rev_min=$(5) --input_file=$(6) \
+		--output_file=$(BIN_DIR)/openwrt-$(2)-$(1).bin
+endef
+
 define Build/Clean
 	$(MAKE) -C lzma-loader clean
 endef
 
-define Image/Prepare
+define Image/PrepareLoader
 	# Standard LZMA kernel
-	cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+	$(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux$(1) $(KDIR)/vmlinux$(1).lzma
+
+	# Build the LZMA loader
+	rm -rf $(KDIR)/lzma-loader
+	$(MAKE) -C lzma-loader \
+		$(LOADER_MAKEOPTS) \
+		BUILD_DIR="$(KDIR)" \
+		TARGET_DIR="$(BIN_DIR)" \
+		LOADER_DATA="$(KDIR)/vmlinux$(1).lzma" \
+		LOADER=$(IMG_PREFIX)-loader$(1).elf \
+		LZMA_TEXT_START=0x80a00000 \
+		compile loader.elf
 
+	rm -f $(KDIR)/vmlinux$(1).lzma
+endef
+
+define Image/PrepareLoaderDTB
+	# append dtb to vmlinux, then build a standard LZMA loader
+	cat $(KDIR)/vmlinux$(1) $(DTS_DIR)/$(2).dtb > $(KDIR)/vmlinux$(1)-$(2)
+	$(call Image/PrepareLoader,$(1)-$(2))
+endef
+
+define Image/PrepareCFELzmaKernel
 	# CFE is a LZMA nazi! It took me hours to find out the parameters!
 	# Also I think lzma has a bug cause it generates different output depending on
 	# if you use stdin / stdout or not. Use files instead of stdio here, cause
 	# otherwise CFE will complain and not boot the image.
-	$(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
+	$(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux$(1) $(KDIR)/vmlinux$(1).lzma.tmp
 
 	# Strip out the length, CFE doesn't like this
-	dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
-	dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
-	rm -f $(KDIR)/vmlinux.lzma.tmp
+	dd if=$(KDIR)/vmlinux$(1).lzma.tmp of=$(KDIR)/vmlinux$(1).lzma.cfe bs=5 count=1
+	dd if=$(KDIR)/vmlinux$(1).lzma.tmp of=$(KDIR)/vmlinux$(1).lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
+	rm -f $(KDIR)/vmlinux$(1).lzma.tmp
+endef
 
-	# Build the LZMA loader
-	rm -f $(KDIR)/loader.gz
-	$(MAKE) -C lzma-loader \
-		BUILD_DIR="$(KDIR)" \
-		TARGET="$(KDIR)" \
-		clean install
+define Image/PrepareCFELzmaKernelDTB
+	# compile the dts (the dtb will be later reused for the lzma loader)
+	$(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(DTS_DIR)/$(1).dtb ../dts/$(1).dts
+	cat $(KDIR)/vmlinux $(DTS_DIR)/$(1).dtb > $(KDIR)/vmlinux-$(1)
+	$(call Image/PrepareCFELzmaKernel,-$(1))
+endef
+
+define Image/Prepare
+	$(call Image/PrepareCFELzmaKernel,)
 
-	echo -ne "\\x00" >> $(KDIR)/loader.gz
+	$(foreach board,$(sort $(TARGET_DTBS)), $(call Image/PrepareCFELzmaKernelDTB,$(board)))
+
+ ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+	$(call Image/PrepareLoader,-initramfs)
+	$(foreach board,$(sort $(TARGET_DTBS)), $(call Image/PrepareLoaderDTB,-initramfs,$(board)))
+ endif
 	rm -f $(KDIR)/fs_mark
 	touch $(KDIR)/fs_mark
 	$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
 endef
 
+define Image/Build/Initramfs
+	# Netgear CVG834G
+	$(call Image/Build/HCS,initramfs,cvg834g,a020,0001,0022,$(KDIR)/vmlinux-initramfs)
+endef
+
 define Image/Build
 	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
 	# Various routers
+	$(call Image/Build/CFE,$(1),96328avng,6328,96328avng-4M-flash-generic,,--pad 2)
+	$(call Image/Build/CFE,$(1),96328avng,6328,96328avng-8M-flash-generic,,--pad 4)
+	$(call Image/Build/CFE,$(1),96328avng,6328,96328avng-16M-flash-generic,,--pad 8)
+	$(call Image/Build/CFE,$(1),963281TAN,6328,963281TAN-4M-flash-generic,,--pad 2)
+	$(call Image/Build/CFE,$(1),963281TAN,6328,963281TAN-8M-flash-generic,,--pad 4)
+	$(call Image/Build/CFE,$(1),963281TAN,6328,963281TAN-16M-flash-generic,,--pad 8)
 	$(call Image/Build/CFE,$(1),96345GW2,6345,96345GW2-generic)
 	$(call Image/Build/CFE,$(1),96345GW2,6345,96348GW2-bc221,,--layoutver 5)
 	$(call Image/Build/CFE,$(1),96345GW2,6345,92345GW2-rev,OpenWRT-$(REVISION))
@@ -155,12 +227,18 @@ define Image/Build
 	$(call Image/Build/CFE,$(1),6338W,6338,6338W-generic,,)
 	$(call Image/Build/CFE,$(1),96348GW-11,6348,96348GW-11-generic)
 	$(call Image/Build/CFE,$(1),96348GW-10,6348,96348GW-10-generic)
+	$(call Image/Build/CFE,$(1),96348A-122,6348,96348A-122-generic)
 	$(call Image/Build/CFE,$(1),96358VW,6358,96358VW-generic)
 	$(call Image/Build/CFE,$(1),96358VW2,6358,96358VW2-generic)
-
 	$(call Image/Build/CFE,$(1),96368MVNgr,6368,96368MVNgr-generic)
 	$(call Image/Build/CFE,$(1),96368MVWG,6368,96368MVWG-generic)
 
+	# ADB P.DG A4001N
+	$(call Image/Build/CFE,$(1),96328dg2x2,6328,A4001N,,--pad 4)
+	# ADB P.DG A4001N1
+	$(call Image/Build/CFE,$(1),963281T_TEF,6328,A4001N1,,--pad 8)
+	# Asmax AR 1004g
+	$(call Image/Build/CFEFIXUP,$(1),96348GW-10,AR1004G,6348,AR1004G)
 	# BT Voyager V210_BTR
 	$(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5)
 	# BT Voyager V210_ROI, V210_WB
@@ -185,8 +263,29 @@ define Image/Build
 	$(call Image/Build/CFEFIXUP,$(1),96348GW,GW6200,6348,GW6200,$(shell printf '\x99'))
 	# Neufbox4
 	$(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
+	# Zyxel P870HW-51a v2
+	$(call Image/Build/ZyXEL,$(1),96368VVW,P870HW-51a_v2,6368,P870HW-51a_v2,ZyXEL,--signature "ZyXEL_0001")
+
+	# Neufbox6
+	$(call Image/Build/CFE,$(1),NB6-SER-r0,6362,NEUFBOX6,OpenWRT-$(REVISION))
+
+	# Sagem F@ST2504n
+	$(call Image/Build/CFE,$(1),F@ST2504n,6362,F@ST2504n,OpenWRT-$(REVISION))
+
+	# Comtrend 6373
+	$(call Image/Build/CFE,$(1),CT6373-1,6358,CT6373)
 	# Comtrend 536, 5621
 	$(call Image/Build/CFEFIXUP,$(1),96348GW-11,CT536_CT5621,6348,CT536_CT5621)
+	# Comtrend AR-5381u
+	$(call Image/Build/CFE,$(1),96328A-1241N,6328,AR-5381u,,--pad 8)
+	# Comtrend AR-5387un
+	$(call Image/Build/CFE,$(1),96328A-1441N1,6328,AR-5387un,,--pad 8)
+	# Comtrend VR-3025u
+	$(call Image/Build/CFE,$(1),96368M-1541N,6368,VR-3025u,,--pad 16)
+	# Comtrend VR-3025un
+	$(call Image/Build/CFE,$(1),96368M-1341N,6368,VR-3025un,,--pad 4)
+	# Comtrend WAP-5813n
+	$(call Image/Build/CFE,$(1),96369R-1231N,6368,WAP-5813n,,--pad 4)
 	# Davolink DV201AMR
 	$(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
 	# USR 9108
@@ -203,8 +302,11 @@ define Image/Build
 	$(call Image/Build/CFEFIXUP,$(1),96358GW,AW4139,6358,DSL274XB-C2)
 	# D-Link DSL-2740B/DSL-2741B, rev C3
 	$(call Image/Build/CFE,$(1),AW4139,6358,DSL274XB-C3)
+	# D-Link DSL-2740B/DSL-2741B, rev F1
+	$(call Image/Build/CFE,$(1),AW4339U,6328,DSL274XB-F1-EU,,--signature2="4.06.01.EUF1" --pad 4)
+	$(call Image/Build/CFE,$(1),AW4339U,6328,DSL274XB-F1-AU,,--signature2="4.06.01.AUF1" --pad 4)
 	# D-Link DVA-G3810BN/TL
-	$(call Image/Build/CFE,$(1),96358GW,6358,DVAG3810BN)
+	$(call Image/Build/CFEFIXUP,$(1),96358VW,DVAG3810BN,6358,DVAG3810BN)
 
 	# TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
 	$(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)
@@ -214,6 +316,12 @@ define Image/Build
 	# Sagem F@ST2404
 	$(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404-cfe)
 	$(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404,OpenWRT-$(REVISION))
+	# Sagem F@ST2604
+	$(call Image/Build/CFE,$(1),F@ST2604,6348,F@ST2604-cfe)
+	$(call Image/Build/CFE,$(1),F@ST2604,6348,F@ST2604,OpenWRT-$(REVISION))
+	# Sagem F@ST2704V2
+	$(call Image/Build/CFE,$(1),F@ST2704V2,6328,F@ST2704V2-cfe)
+	$(call Image/Build/CFE,$(1),F@ST2704V2,6328,F@ST2704V2,OpenWRT-$(REVISION))
 	# Inventel Livebox
 	$(call Image/Build/RedBoot,livebox)
 	# Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
@@ -236,11 +344,24 @@ define Image/Build
 	# T-Com Speedport W 500V
 	$(call Image/Build/CFEFIXUP,$(1),96348GW,SPW500V,6348,SPW500V)
 
+	# Huawei HW520
+	$(call Image/Build/CFE,$(1),HW6358GW_B,6358,HW520,EchoLife_HG520v)
+
 	#HW553
 	$(call Image/Build/CFEHW553,$(1),HW553,6358,0x20000,HW553)
 
+	#HW556
+	$(call Image/Build/CFEHW556,$(1),HW556,6358,0x20000,EchoLife_HG556a,OpenWRT-$(REVISION))
+
 	# T-Com Speedport W 303V Typ B
 	$(call Image/Build/SPW303V,$(1),96358-502V,6358,SPW303V)
+
+	# Netgear CVG834G
+	$(call Image/Build/HCS,$(1),cvg834g,a020,0001,0022,$(KDIR)/vmlinux)
+
+  ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+	$(call Image/Build/Initramfs)
+  endif
 endef
 
 $(eval $(call BuildImage))