X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Fipq40xx%2Fbase-files%2Fetc%2Fhotplug.d%2Ffirmware%2F11-ath10k-caldata;h=8b6abc4ff7a08e3099cd036410afd7d3bfd2684a;hp=1e64b93a46cb1fc82052d964b78a9d0d894881b5;hb=102c8c55f217606cdbdc9a449667e034676b3e75;hpb=819e7946b0964725dab50c92797f49cf4053d955

diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 1e64b93a46..8b6abc4ff7 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,95 +1,8 @@
 #!/bin/sh
 
-# xor multiple hex values of the same length
-xor() {
-	local val
-	local ret="0x$1"
-	local retlen=${#1}
-
-	shift
-	while [ -n "$1" ]; do
-		val="0x$1"
-		ret=$((ret ^ val))
-		shift
-	done
-
-	printf "%0${retlen}x" "$ret"
-}
-
-ath10kcal_die() {
-	echo "ath10cal: " "$*"
-	exit 1
-}
-
-ath10kcal_extract() {
-	local part=$1
-	local offset=$2
-	local count=$3
-	local mtd
-
-	mtd=$(find_mtd_chardev $part)
-	[ -n "$mtd" ] || \
-		ath10kcal_die "no mtd device found for partition $part"
-
-	dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-		ath10kcal_die "failed to extract calibration data from $mtd"
-}
-
-ath10kcal_ubi_extract() {
-	local part=$1
-	local offset=$2
-	local count=$3
-	local ubidev
-	local ubi
-
-	. /lib/upgrade/nand.sh
-
-	ubidev=$(nand_find_ubi $CI_UBIPART)
-	ubi=$(nand_find_volume $ubidev $part)
-	[ -n "$ubi" ] || \
-		ath10kcal_die "no UBI volume found for $part"
-
-	dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-		ath10kcal_die "failed to extract from $ubi"
-}
-
-ath10kcal_patch_mac_crc() {
-	local mac=$1
-	local mac_offset=6
-	local chksum_offset=2
-	local xor_mac
-	local xor_fw_mac
-	local xor_fw_chksum
-
-	[ -z "$mac" ] && return
-
-	xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
-	xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
-
-	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
-
-	xor_mac=${mac//:/}
-	xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
-
-	xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
-	xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
-
-	printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
-		dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
-}
-
-ath10kcal_is_caldata_valid() {
-	local expected="$1"
-
-	magic=$(hexdump -v -n 2 -e '1/1 "%02x"' /lib/firmware/$FIRMWARE)
-	[[ "$magic" == "$expected" ]]
-	return $?
-}
-
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-. /lib/functions.sh
-. /lib/functions/system.sh
+. /lib/functions/caldata.sh
 
 board=$(board_name)
 
@@ -97,30 +10,34 @@ case "$FIRMWARE" in
 "ath10k/cal-pci-0000:01:00.0.bin")
 	case "$board" in
 	meraki,mr33)
-		ath10kcal_ubi_extract "ART" 36864 2116
-		ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 36864 2116
-		ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +1)
+		caldata_extract_ubi "ART" 0x9000 0x844
+		caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
+		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
 		;;
 	esac
 	;;
 "ath10k/pre-cal-pci-0000:01:00.0.bin")
 	case "$board" in
 	asus,map-ac2200)
-		ath10kcal_ubi_extract "Factory" 36864 12064
+		caldata_extract_ubi "Factory" 0x9000 0x2f20
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		;;
 	avm,fritzrepeater-3000)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 		;;
 	linksys,ea8300)
-		ath10kcal_extract "ART" 36864 12064
+		caldata_extract "ART" 0x9000 0x2f20
 		# OEM assigns 4 sequential MACs
-		ath10kcal_patch_mac_crc $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
+		ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
 		;;
 	openmesh,a62)
-		ath10kcal_extract "0:ART" 36864 12064
+		caldata_extract "0:ART" 0x9000 0x2f20
 		;;
 	esac
 	;;
@@ -128,56 +45,68 @@ case "$FIRMWARE" in
 	case "$board" in
 	8dev,jalapeno |\
 	alfa-network,ap120c-ac |\
+	cilab,meshpoint-one |\
 	glinet,gl-b1300 |\
 	linksys,ea6350v3 |\
 	qcom,ap-dk01.1-c1)
-		ath10kcal_extract "ART" 4096 12064
+		caldata_extract "ART" 0x1000 0x2f20
+		;;
+	aruba,ap-303)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
 		;;
 	asus,map-ac2200)
-		ath10kcal_ubi_extract "Factory" 4096 12064
+		caldata_extract_ubi "Factory" 0x1000 0x2f20
 		;;
 	asus,rt-ac58u)
 		CI_UBIPART=UBI_DEV
-		ath10kcal_ubi_extract "Factory" 4096 12064
+		caldata_extract_ubi "Factory" 0x1000 0x2f20
 		;;
 	avm,fritzbox-4040)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 		;;
 	avm,fritzbox-7530 |\
+	avm,fritzrepeater-1200 |\
 	avm,fritzrepeater-3000)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 		;;
+	compex,wpj419 |\
 	compex,wpj428 |\
 	engenius,eap1300 |\
 	openmesh,a42 |\
 	openmesh,a62 |\
 	qxwlan,e2600ac-c1 |\
-	qxwlan,e2600ac-c2)
-		ath10kcal_extract "0:ART" 4096 12064
+	qxwlan,e2600ac-c2 |\
+	unielec,u4019-32m)
+		caldata_extract "0:ART" 0x1000 0x2f20
 		;;
 	engenius,ens620ext)
-		ath10kcal_extract "ART" 4096 12064
-		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
 		;;
 	linksys,ea8300)
-		ath10kcal_extract "ART" 4096 12064
-		ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
 		;;
 	meraki,mr33)
-		ath10kcal_ubi_extract "ART" 4096 12064
-		ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 4096 12064
-		ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +2)
+		caldata_extract_ubi "ART" 0x1000 0x2f20
+		caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
 		;;
 	netgear,ex6100v2 |\
 	netgear,ex6150v2)
-		ath10kcal_extract "ART" 4096 12064
-		ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
 		;;
 	zyxel,nbg6617 |\
 	zyxel,wre6606)
-		ath10kcal_extract "ART" 4096 12064
-		ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 		;;
 	esac
 	;;
@@ -185,56 +114,68 @@ case "$FIRMWARE" in
 	case "$board" in
 	8dev,jalapeno |\
 	alfa-network,ap120c-ac |\
+	cilab,meshpoint-one |\
 	glinet,gl-b1300 |\
 	linksys,ea6350v3 |\
 	qcom,ap-dk01.1-c1)
-		ath10kcal_extract "ART" 20480 12064
+		caldata_extract "ART" 0x5000 0x2f20
+		;;
+	aruba,ap-303)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
 		;;
 	asus,map-ac2200)
-		ath10kcal_ubi_extract "Factory" 20480 12064
+		caldata_extract_ubi "Factory" 0x5000 0x2f20
 		;;
 	asus,rt-ac58u)
 		CI_UBIPART=UBI_DEV
-		ath10kcal_ubi_extract "Factory" 20480 12064
+		caldata_extract_ubi "Factory" 0x5000 0x2f20
 		;;
 	avm,fritzbox-4040)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 		;;
 	avm,fritzbox-7530 |\
+	avm,fritzrepeater-1200 |\
 	avm,fritzrepeater-3000)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 		;;
+	compex,wpj419 |\
 	compex,wpj428 |\
 	engenius,eap1300 |\
 	openmesh,a42 |\
 	openmesh,a62 |\
 	qxwlan,e2600ac-c1 |\
-	qxwlan,e2600ac-c2)
-		ath10kcal_extract "0:ART" 20480 12064
+	qxwlan,e2600ac-c2 |\
+	unielec,u4019-32m)
+		caldata_extract "0:ART" 0x5000 0x2f20
 		;;
 	engenius,ens620ext)
-		ath10kcal_extract "ART" 20480 12064
-		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
 		;;
 	linksys,ea8300)
-		ath10kcal_extract "ART" 20480 12064
-		ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
 		;;
 	meraki,mr33)
-		ath10kcal_ubi_extract "ART" 20480 12064
-		ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 20480 12064
-		ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +3)
+		caldata_extract_ubi "ART" 0x5000 0x2f20
+		caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
 		;;
 	netgear,ex6100v2 |\
 	netgear,ex6150v2)
-		ath10kcal_extract "ART" 20480 12064
-		ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 12)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
 		;;
 	zyxel,nbg6617 |\
 	zyxel,wre6606)
-		ath10kcal_extract "ART" 20480 12064
-		ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
 		;;
 	esac
 	;;