X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Fipq40xx%2Fimage%2FMakefile;h=fada35a49d976406e62e0b9220e3d502d0967847;hp=125b3bf8e2c68492eb849341b9fa2a986a9c78f6;hb=102c8c55f217606cdbdc9a449667e034676b3e75;hpb=7a8017b0ae15bbfcad4562ef7d70833b7c4f15f1

diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile
index 125b3bf8e2..fada35a49d 100644
--- a/target/linux/ipq40xx/image/Makefile
+++ b/target/linux/ipq40xx/image/Makefile
@@ -1,6 +1,8 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
+DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
+
 define Device/Default
 	PROFILES := Default
 	KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
@@ -24,6 +26,12 @@ define Device/FitImageLzma
 	KERNEL_NAME := Image
 endef
 
+define Device/FitzImage
+	KERNEL_SUFFIX := -fit-zImage.itb
+	KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+	KERNEL_NAME := zImage
+endef
+
 define Device/UbiFit
 	KERNEL_IN_UBI := 1
 	IMAGES := nand-factory.ubi nand-sysupgrade.bin
@@ -31,14 +39,86 @@ define Device/UbiFit
 	IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
 endef
 
+define Device/DniImage
+	KERNEL_SUFFIX := -fit-uImage.itb
+	KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+	KERNEL_NAME := Image
+	NETGEAR_BOARD_ID :=
+	NETGEAR_HW_ID :=
+	IMAGES := factory.img sysupgrade.bin
+	IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
+	IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | append-metadata
+endef
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+
+define Build/SenaoFW
+	-$(STAGING_DIR_HOST)/bin/mksenaofw \
+		-n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
+		-c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
+		-e $@ \
+		-o $@.new
+	@cp $@.new $@
+endef
+
+define Device/8dev_jalapeno-common
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+endef
+
+define Device/8dev_jalapeno
+	$(call Device/8dev_jalapeno-common)
+	DEVICE_VENDOR := 8devices
+	DEVICE_MODEL := Jalapeno
+	DEVICE_DTS := qcom-ipq4018-jalapeno
+endef
+TARGET_DEVICES += 8dev_jalapeno
+
+define Device/alfa-network_ap120c-ac
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := ALFA Network
+	DEVICE_MODEL := AP120C-AC
+	DEVICE_DTS := qcom-ipq4018-ap120c-ac
+	DEVICE_PACKAGES := kmod-usb-acm \
+		kmod-tpm-i2c-atmel uboot-envtools
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGE_SIZE := 65536k
+	IMAGES := nand-factory.bin nand-sysupgrade.bin
+	IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+endef
+TARGET_DEVICES += alfa-network_ap120c-ac
+
+define Device/aruba_ap-303
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Aruba
+	DEVICE_MODEL := AP-303
+	DEVICE_DTS := qcom-ipq4029-ap-303
+	DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
+	IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += aruba_ap-303
+
+define Device/asus_map-ac2200
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := ASUS
+	DEVICE_MODEL := Lyra (MAP-AC2200)
+	DEVICE_DTS := qcom-ipq4019-map-ac2200
+	IMAGES := sysupgrade.bin
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
+endef
+TARGET_DEVICES += asus_map-ac2200
 
 define Device/asus_rt-ac58u
 	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := ASUS
+	DEVICE_MODEL := RT-AC58U
 	DEVICE_DTS := qcom-ipq4018-rt-ac58u
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	DTB_SIZE := 65536
-	DEVICE_TITLE := Asus RT-AC58U
 	IMAGE_SIZE := 20439364
 	FILESYSTEMS := squashfs
 #	Someone - in their infinite wisdom - decided to put the firmware
@@ -48,77 +128,274 @@ define Device/asus_rt-ac58u
 #	string and call it a day.... Yeah, we do the latter!
 	UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 	IMAGES := sysupgrade.bin
-	DEVICE_PACKAGES := ipq-wifi-asus_rt-ac58u kmod-usb-ledtrig-usbport
+	DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += asus_rt-ac58u
 
 define Device/avm_fritzbox-4040
 	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := AVM
+	DEVICE_MODEL := FRITZ!Box 4040
 	DEVICE_DTS := qcom-ipq4018-fritz4040
 	BOARD_NAME := fritz4040
-	DEVICE_TITLE := AVM Fritz!Box 4040
-	IMAGE_SIZE := 29753344
-	IMAGES = sysupgrade.bin
+	IMAGE_SIZE := 29056k
+	UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
+	UBOOT_PARTITION_SIZE := 524288
+	IMAGES = eva.bin sysupgrade.bin
+	IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-avm_fritzbox-4040 fritz-tffs fritz-caldata u-boot-fritz4040
+	DEVICE_PACKAGES := fritz-tffs fritz-caldata
 endef
 TARGET_DEVICES += avm_fritzbox-4040
 
+define Device/avm_fritzbox-7530
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := AVM
+	DEVICE_MODEL := FRITZ!Box 7530
+	DEVICE_DTS := qcom-ipq4019-fritzbox-7530
+	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
+	IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += avm_fritzbox-7530
+
+define Device/avm_fritzrepeater-1200
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := AVM
+	DEVICE_MODEL := FRITZ!Repeater 1200
+	DEVICE_DTS := qcom-ipq4019-fritzrepeater-1200
+	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
+	IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += avm_fritzrepeater-1200
+
+define Device/avm_fritzrepeater-3000
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := AVM
+	DEVICE_MODEL := FRITZ!Repeater 3000
+	DEVICE_DTS := qcom-ipq4019-fritzrepeater-3000
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
+	IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += avm_fritzrepeater-3000
+
+define Device/cilab_meshpoint-one
+	$(call Device/8dev_jalapeno-common)
+	DEVICE_DTS := qcom-ipq4018-meshpoint-one
+	DEVICE_VENDOR := Crisis Innovation Lab
+	DEVICE_MODEL := MeshPoint.One
+	DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
+endef
+TARGET_DEVICES += cilab_meshpoint-one
+
+define Device/compex_wpj419
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Compex
+	DEVICE_MODEL := WPJ419
+	DEVICE_DTS := qcom-ipq4019-wpj419
+	DEVICE_DTS_CONFIG := config@12
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	FILESYSTEMS := squashfs
+endef
+TARGET_DEVICES += compex_wpj419
+
 define Device/compex_wpj428
 	$(call Device/FitImage)
+	DEVICE_VENDOR := Compex
+	DEVICE_MODEL := WPJ428
 	DEVICE_DTS := qcom-ipq4028-wpj428
 	DEVICE_DTS_CONFIG := config@4
 	BLOCKSIZE := 64k
-	DEVICE_TITLE := Compex WPJ428
 	IMAGE_SIZE := 31232k
 	KERNEL_SIZE := 4096k
 	IMAGES = sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ath10k-firmware-qca4019 kmod-gpio-beeper
+	DEVICE_PACKAGES := kmod-gpio-beeper
 endef
 TARGET_DEVICES += compex_wpj428
 
+define Device/engenius_eap1300
+	$(call Device/FitImage)
+	DEVICE_VENDOR := EnGenius
+	DEVICE_MODEL := EAP1300
+	DEVICE_DTS_CONFIG := config@4
+	BOARD_NAME := eap1300
+	DEVICE_DTS := qcom-ipq4018-eap1300
+	KERNEL_SIZE := 5120k
+	IMAGE_SIZE := 25344k
+	IMAGES := sysupgrade.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += engenius_eap1300
+
+define Device/engenius_ens620ext
+	$(call Device/FitImage)
+	DEVICE_VENDOR := EnGenius
+	DEVICE_MODEL := ENS620EXT
+	DEVICE_DTS := qcom-ipq4018-ens620ext
+	DEVICE_DTS_CONFIG := config@4
+	BLOCKSIZE := 64k
+	PAGESIZE := 256
+	BOARD_NAME := ENS620EXT
+	VENDOR_ID := 0x0101
+	PRODUCT_ID := 0x79
+	PRODUCT_ID_NEW := 0xA4
+	DATECODE := 190507
+	FW_VER := 3.1.2
+	FW_VER_NEW := 3.5.6
+	CW_VER := 1.8.99
+	IMAGE_SIZE := 21312k
+	KERNEL_SIZE := 5120k
+	FILESYSTEMS := squashfs
+	IMAGES := sysupgrade.bin factory_30.bin factory_35.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | append-metadata
+	IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
+	IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size $$$$(IMAGE_SIZE) | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
+endef
+TARGET_DEVICES += engenius_ens620ext
+
 define Device/glinet_gl-b1300
 	$(call Device/FitImage)
-	DEVICE_TITLE := GL.iNet GL-B1300
+	DEVICE_VENDOR := GL.iNet
+	DEVICE_MODEL := GL-B1300
 	BOARD_NAME := gl-b1300
 	DEVICE_DTS := qcom-ipq4029-gl-b1300
 	KERNEL_SIZE := 4096k
 	IMAGE_SIZE := 26624k
 	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-glinet_gl-b1300
 endef
 TARGET_DEVICES += glinet_gl-b1300
 
+define Device/linksys_ea6350v3
+	# The Linksys EA6350v3 has a uboot bootloader that does not
+	# support either booting lzma kernel images nor booting UBI
+	# partitions. This uboot, however, supports raw kernel images and
+	# gzipped images.
+	#
+	# As for the time of writing this, the device will boot the kernel
+	# from a fixed address with a fixed length of 3MiB. Also, the
+	# device has a hard-coded kernel command line that requieres the
+	# rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
+	# Oh... and the kernel partition overlaps with the rootfs
+	# partition (the same for alt_kernel and alt_rootfs).
+	#
+	# If you are planing re-partitioning the device, you may want to
+	# keep those details in mind:
+	# 1. The kernel adresses you should honor are 0x00000000 and
+	#    0x02800000 respectively.
+	# 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
+	# 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
+	# 4. The kernel command line from uboot is harcoded to boot with
+	#    rootfs either in mtd11 or mtd13.
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := EA6350
+	DEVICE_VARIANT := v3
+	DEVICE_DTS := qcom-ipq4018-ea6350v3
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_SIZE := 3072k
+	IMAGE_SIZE := 37888k
+	UBINIZE_OPTS := -E 5
+	IMAGES := factory.bin sysupgrade.bin
+	IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$${KERNEL_SIZE} | append-ubi | linksys-image type=EA6350v3
+	DEVICE_PACKAGES := uboot-envtools
+endef
+TARGET_DEVICES += linksys_ea6350v3
+
+define Device/linksys_ea8300
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := EA8300
+	DEVICE_DTS := qcom-ipq4019-linksys_ea8300
+	KERNEL_SIZE := 3072k
+	IMAGE_SIZE := 87040k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
+	IMAGES := sysupgrade.bin factory.bin
+	IMAGE/factory.bin  := append-kernel | pad-to $$$${KERNEL_SIZE} | append-ubi | linksys-image type=EA8300
+	DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += linksys_ea8300
+
 define Device/meraki_mr33
 	$(call Device/FitImage)
+	DEVICE_VENDOR := Cisco Meraki
+	DEVICE_MODEL := MR33
 	DEVICE_DTS := qcom-ipq4029-mr33
-	BLOCKSIZE := 131072
+	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	DEVICE_TITLE := Cisco Meraki MR33
 	IMAGES = sysupgrade.bin
-	DEVICE_PACKAGES := -swconfig ipq-wifi-meraki_mr33 ath10k-firmware-qca9887
+	DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 endef
 TARGET_DEVICES += meraki_mr33
 
+define Device/netgear_ex61x0v2
+	$(call Device/DniImage)
+	DEVICE_DTS_CONFIG := config@4
+	NETGEAR_BOARD_ID := EX6150v2series
+	NETGEAR_HW_ID := 29765285+16+0+128+2x2
+endef
+
+define Device/netgear_ex6100v2
+	$(call Device/netgear_ex61x0v2)
+	DEVICE_VENDOR := Netgear
+	DEVICE_MODEL := EX6100
+	DEVICE_VARIANT := v2
+	DEVICE_DTS := qcom-ipq4018-ex6100v2
+endef
+TARGET_DEVICES += netgear_ex6100v2
+
+define Device/netgear_ex6150v2
+	$(call Device/netgear_ex61x0v2)
+	DEVICE_VENDOR := Netgear
+	DEVICE_MODEL := EX6150
+	DEVICE_VARIANT := v2
+	DEVICE_DTS := qcom-ipq4018-ex6150v2
+endef
+TARGET_DEVICES += netgear_ex6150v2
+
 define Device/openmesh_a42
 	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := OpenMesh
+	DEVICE_MODEL := A42
 	DEVICE_DTS := qcom-ipq4018-a42
 	DEVICE_DTS_CONFIG := config@om.a42
 	BLOCKSIZE := 64k
-	DEVICE_TITLE := OpenMesh A42
 	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 	IMAGE_SIZE := 15616k
 	IMAGES = factory.bin sysupgrade.bin
 	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
-	DEVICE_PACKAGES := ath10k-firmware-qca4019 uboot-envtools
+	DEVICE_PACKAGES := uboot-envtools
 endef
 TARGET_DEVICES += openmesh_a42
 
+define Device/openmesh_a62
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := OpenMesh
+	DEVICE_MODEL := A62
+	DEVICE_DTS := qcom-ipq4019-a62
+	DEVICE_DTS_CONFIG := config@om.a62
+	BLOCKSIZE := 64k
+	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	IMAGE_SIZE := 15552k
+	IMAGES = factory.bin sysupgrade.bin
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
+endef
+
+TARGET_DEVICES += openmesh_a62
+
 define Device/qcom_ap-dk01.1-c1
-	DEVICE_TITLE := QCA AP-DK01.1-C1
+	DEVICE_VENDOR := Qualcomm Atheros
+	DEVICE_MODEL := AP-DK01.1
+	DEVICE_VARIANT := C1
 	BOARD_NAME := ap-dk01.1-c1
 	DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 	KERNEL_INSTALL := 1
@@ -127,21 +404,97 @@ define Device/qcom_ap-dk01.1-c1
 	$(call Device/FitImage)
 	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ath10k-firmware-qca4019
 endef
 TARGET_DEVICES += qcom_ap-dk01.1-c1
 
 define Device/qcom_ap-dk04.1-c1
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
+	DEVICE_VENDOR := Qualcomm Atheros
+	DEVICE_MODEL := AP-DK04.1
+	DEVICE_VARIANT := C1
 	DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
 	KERNEL_INSTALL := 1
 	KERNEL_SIZE := 4048k
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	BOARD_NAME := ap-dk04.1-c1
-	DEVICE_TITLE := QCA AP-DK04.1-C1
 endef
 TARGET_DEVICES += qcom_ap-dk04.1-c1
 
+define Device/qxwlan_e2600ac-c1
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Qxwlan
+	DEVICE_MODEL := E2600AC
+	DEVICE_VARIANT := C1
+	BOARD_NAME := e2600ac-c1
+	DEVICE_DTS := qcom-ipq4019-qxwlan-e2600ac-c1
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 31232k
+	IMAGES := sysupgrade.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
+endef
+TARGET_DEVICES += qxwlan_e2600ac-c1
+
+define Device/qxwlan_e2600ac-c2
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Qxwlan
+	DEVICE_MODEL := E2600AC
+	DEVICE_VARIANT := C2
+	DEVICE_DTS := qcom-ipq4019-qxwlan-e2600ac-c2
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
+endef
+TARGET_DEVICES += qxwlan_e2600ac-c2
+
+define Device/unielec_u4019-32m
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Unielec
+	DEVICE_MODEL := U4019
+	DEVICE_VARIANT := 32M
+	BOARD_NAME := u4019-32m
+	DEVICE_DTS := qcom-ipq4019-unielec-u4019-32m
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 31232k
+	IMAGES := sysupgrade.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += unielec_u4019-32m
+
+define Device/zyxel_nbg6617
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := ZyXEL
+	DEVICE_MODEL := NBG6617
+	DEVICE_DTS := qcom-ipq4018-nbg6617
+	ROOTFS_SIZE := 24960k
+	RAS_BOARD := NBG6617
+	RAS_ROOTFS_SIZE := 19840k
+	RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	IMAGES := sysupgrade.bin factory.bin
+#	The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
+#	at least as large as the one of the initial firmware image (not the current
+#	one on the device). This only applies to the Web-UI, the bootlaoder ignores
+#	this minimum-size. However, the larger image can be flashed both ways.
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := uboot-envtools kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += zyxel_nbg6617
+
+define Device/zyxel_wre6606
+	$(call Device/FitImage)
+	DEVICE_VENDOR := ZyXEL
+	DEVICE_MODEL := WRE6606
+	DEVICE_DTS_CONFIG := config@4
+	DEVICE_DTS := qcom-ipq4018-wre6606
+	IMAGES := sysupgrade.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += zyxel_wre6606
+
 $(eval $(call BuildImage))