X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Fipq806x%2Fbase-files%2Fetc%2Fboard.d%2F02_network;h=9d8af44855527dc40fb93d8d9a316ca068b8b190;hp=e279cdd8f6bf4f17e4ff7bdb918966e09fac7fe8;hb=0c7e78930b8e3865000ba677d7b71f4f063499f1;hpb=2d67ef86382f32847bdfe120912cbaff11a956d5

diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index e279cdd8f6..9d8af44855 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -12,13 +12,7 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-linksys,ea8500)
-	hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-	ucidef_add_switch "switch0" \
-		"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
-	ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
-	ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
-	;;
+compex,wpq864 |\
 netgear,d7800 |\
 netgear,r7500 |\
 netgear,r7500v2 |\
@@ -28,6 +22,13 @@ tplink,vr2600v)
 	ucidef_add_switch "switch0" \
 		"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
 	;;
+linksys,ea8500)
+	hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+	ucidef_add_switch "switch0" \
+		"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+	ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
+	ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
+	;;
 qcom,ipq8064-db149)
 	ucidef_set_interface_lan "eth1 eth2 eth3"
 	ucidef_add_switch "switch0" \