X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Flantiq%2Fbase-files%2Fetc%2Fboard.d%2F02_network;h=18d0ba4926ef0bf00c5eae483c650b2b3a63aa77;hp=bc61a733629c886eada0dffbfd6e9532bfdc648b;hb=b02b7004f8d1a946cfd71d2458d5bc3c5946dae7;hpb=d9d838bc97c5acabebf27ac2a760e7301d0b3625

diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index bc61a73362..18d0ba4926 100755
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -12,20 +12,29 @@ board_config_update
 vpi=1
 vci=32
 annex="a"
+tone="av"
+xfer_mode=""
 encaps="llc"
 payload="bridged"
 lan_mac=""
 wan_mac=""
-interface_wan=""
+interface_wan="dsl0"
 
-board=$(lantiq_board_name)
+board=$(board_name)
 
 case "$board" in
-ACMP252|GIGASX76X)
+ACMP252)
 	ucidef_add_switch "switch0" \
 		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
 	;;
 
+ALL0333CJ)
+	annex="b"
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_set_interface_lan 'eth0'
+	;;
+
 ARV4510PW)
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
@@ -33,17 +42,24 @@ ARV4510PW)
 		"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
 	;;
 
-ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
+ARV4519PW|ARV7510PW22|ARV7518PW)
 	ucidef_add_switch "switch0" \
 		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
 	;;
 
 ARV4520PW)
+	annex="b"
 	ucidef_add_switch "switch0" \
 		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
 	;;
 
+ARV4525PW|ARV452CQW|ARV7525PW|ARV752DPW)
+	annex="b"
+	ucidef_set_interface_lan 'eth0'
+	;;
+
 ARV7506PW11)
+	annex="b"
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
 	ucidef_add_switch "switch0" \
 		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
@@ -58,7 +74,20 @@ ARV7519PW)
 ARV7519RW22)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan" "2:lan" "3:lan" "4:lan" "5:lan" "6t@eth0"
+		"0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
+	;;
+
+ARV752DPW22|ARV8539PW22)
+	annex="b"
+	ucidef_add_switch "switch0" \
+		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
+	;;
+
+ASL56026)
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
+	ucidef_add_switch "switch0"\
+		"2:lan" "3:lan" "6t@eth0"
 	;;
 
 BTHOMEHUBV2B)
@@ -78,7 +107,12 @@ BTHOMEHUBV5A)
 	lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
+		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
+	;;
+
+DGN1000B)
+	annex="b"
+	ucidef_set_interface_lan 'eth0'
 	;;
 
 DGN3500*)
@@ -86,6 +120,12 @@ DGN3500*)
 		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
 	;;
 
+DM200)
+	lan_mac=$(mtd_get_mac_binary ART 0)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_set_interface_lan 'eth0'
+	;;
+
 EASY80920NAND|EASY80920NOR)
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
@@ -93,12 +133,33 @@ EASY80920NAND|EASY80920NOR)
 		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 	;;
 
+FRITZ3370)
+	annex="b"
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1)
+	ucidef_set_interface_lan 'eth0'
+	;;
+
+FRITZ7320)
+	annex="b"
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
+	ucidef_set_interface_lan 'eth0'
+	;;
+
 FRITZ7360SL)
+	annex="b"
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
 	;;
 
+GIGASX76X)
+	annex="b"
+	ucidef_add_switch "switch0" \
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
+	;;
+
 H201L)
+	annex="b"
 	ucidef_add_switch "switch0" \
 		"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
 	;;
@@ -112,7 +173,7 @@ P2812HNUF*)
 	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan" "1:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
+		"0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
 	;;
 
 TDW8970|TDW8980)
@@ -135,15 +196,16 @@ VR200v)
 	;;
 
 VGV7510KW22*)
+	annex="b"
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
 	ucidef_add_switch "switch0" \
-		"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "6t@eth0"
+		"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
 	;;
 
 VGV7519*)
 	wan_mac=$(mtd_get_mac_binary board_config 22)
 	ucidef_add_switch "switch0" \
-		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "6t@eth0"
+		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 	;;
 
 WBMR)
@@ -164,15 +226,12 @@ WBMR300)
 
 esac
 
-if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then
+ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
 	ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
-fi
 
-if grep -qE "system type.*: (VR9|xRX200)" /proc/cpuinfo; then
-	interface_wan="ptm0"
-	ucidef_add_vdsl_modem "$annex" "av" "ptm"
+if lantiq_is_vdsl_system; then
+	ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
 else
-	interface_wan="nas0"
 	ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
 fi