X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Flantiq%2Fbase-files%2Fetc%2Fboard.d%2F02_network;h=d6f66016f64f7295ac90280758d5823b1275092b;hp=15b1f8c10f3147bb1a2c3059a5efeef5d5cd2da5;hb=eb28a0cde631c96388ada781fb02933ecdb0e69d;hpb=6f95d749d6a5c9cce47a14a926a378bc7621a049

diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index 15b1f8c10f..d6f66016f6 100755
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -45,6 +45,14 @@ ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
 		"0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
 	;;
 
+# rtl8306g
+ARV7506PW11)
+	lan_mac=$(mtd_get_mac_binary board_config 22)
+	wan_mac=$(macaddr_add "$lan_mac" 2)
+	ucidef_add_switch "switch0" \
+		"4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t@eth0"
+	;;
+
 # rtl8306g
 ARV7519PW)
 	lan_mac=$(mtd_get_mac_binary board_config 22)
@@ -62,13 +70,18 @@ VG3503J)
 	ucidef_set_interface_lan 'eth0'
 	;;
 
+ARV4518PWR01*)
+        ucidef_set_interface_lan 'eth0'
+        ;;
+
 DGN3500*)
 	ucidef_add_switch "switch0" \
 		"3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
 	;;
 
-GR7000)
-	ucidef_set_interface_wan "eth0"
+FRITZ7360SL)
+	ucidef_add_switch "switch0" \
+		"4:lan:1" "2:lan:2" "0:lan:3" "1:lan:4" "6t@eth0"
 	;;
 
 H201L)
@@ -96,6 +109,13 @@ TDW8970|TDW8980)
 		"0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
 	;;
 
+VR200v)
+	lan_mac=$(mtd_get_mac_binary romfile 61696)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_add_switch "switch0" \
+		"0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
+	;;
+
 ARV7519RW22)
 	lan_mac=$(mtd_get_mac_binary boardconfig 22)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
@@ -119,7 +139,8 @@ BTHOMEHUBV5A)
 VGV7519)
 	lan_mac=$(mtd_get_mac_binary board_config 22)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
-	ucidef_set_interface_lan 'eth0'
+	ucidef_add_switch "switch0" \
+		"4:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "6t@eth0"
 	;;
 
 VGV7510KW22)
@@ -129,15 +150,26 @@ VGV7510KW22)
 		"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
 	;;
 
+WBMR300)
+	lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
+	wan_mac="$lan_mac"
+	ucidef_add_switch "switch0" \
+		"2:lan:2" "3:lan:3" "5:lan:4" "4:wan:1" "6t@eth0"
+	;;
+
+*)
+	ucidef_set_interface_lan 'eth0'
+	;;
+
 esac
 
 if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then
 	ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
 fi
 
-if [ -n "$(grep "system type.*: VR9" /proc/cpuinfo)" ]; then
+if grep -qE "system type.*: (VR9|xRX200)" /proc/cpuinfo; then
 	interface_wan="ptm0"
-	ucidef_add_vdsl_modem "$annex" "/lib/firmware/vdsl.bin" "av" "ptm"
+	ucidef_add_vdsl_modem "$annex" "av" "ptm"
 else
 	interface_wan="nas0"
 	ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"