X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fbase-files%2Fetc%2Fboard.d%2F02_network;h=2d8d8edc29d4a027220b56e18537e2390c87e491;hp=e3e65506a9649ae3ee6689186b17a16e9136890a;hb=6b5dab9469291ac5d335766d9e55a9bf77808419;hpb=68634426fee42803b4be956ef3ac262dee6f8384

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index e3e65506a9..2d8d8edc29 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -32,6 +32,11 @@ ramips_setup_interfaces()
 	local board="$1"
 
 	case $board in
+	11acnas|\
+	w2914nsv2)
+		ucidef_add_switch "switch0" \
+			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
+		;;
 	3g150b|\
 	3g300m|\
 	a5-v11|\
@@ -48,6 +53,8 @@ ramips_setup_interfaces()
 	microwrt|\
 	mpr-a2|\
 	ncs601w|\
+	omega2 | \
+	omega2p | \
 	timecloud|\
 	w150m|\
 	widora-neo|\
@@ -87,7 +94,6 @@ ramips_setup_interfaces()
 	sap-g3200u3|\
 	sk-wb8|\
 	vr500|\
-	w2914nsv2|\
 	wf-2881|\
 	witi|\
 	wl-wn575a3|\
@@ -130,7 +136,6 @@ ramips_setup_interfaces()
 	c50|\
 	dir-645|\
 	dir-860l-b1|\
-	f5d8235-v1|\
 	f5d8235-v2|\
 	gl-mt300a|\
 	gl-mt300n|\
@@ -169,8 +174,7 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
 		;;
-	cf-wr800n|\
-	ex2700)
+	cf-wr800n)
 		ucidef_add_switch "switch0" \
 			"4:lan" "6t@eth0"
 		;;
@@ -181,6 +185,7 @@ ramips_setup_interfaces()
 	cs-qr10|\
 	d105|\
 	dch-m225|\
+	ex2700|\
 	hpm|\
 	mzk-ex300np|\
 	mzk-ex750np|\
@@ -205,6 +210,11 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
 		;;
+	kn_rc|\
+	kn_rf)
+		ucidef_add_switch "switch" \
+			"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
+		;;
 	kng_rc)
 		ucidef_add_switch "switch1" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0"
@@ -214,6 +224,11 @@ ramips_setup_interfaces()
 	wl-330n)
 		ucidef_set_interface_lan "eth0.1"
 		;;
+	mr200)
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
+		ucidef_set_interface_wan "usb0"
+		;;
 	mzk-dp150n|\
 	vocore)
 		ucidef_add_switch "switch0" \
@@ -236,6 +251,11 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
 		;;
+	vocore2)
+		ucidef_add_switch "switch0" \
+			"0:lan" "2:lan" "6t@eth0"
+		;;
+	f5d8235-v1|\
 	tew-714tru|\
 	v11st-fe|\
 	wzr-agl300nh)
@@ -348,6 +368,11 @@ ramips_setup_macs()
 		lan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$lan_mac" 2)
 		;;
+	omega2|\
+	omega2p)
+		wan_mac=$(mtd_get_mac_binary factory 4)
+		lan_mac=$(mtd_get_mac_binary factory 46)
+		;;
 	oy-0001)
 		lan_mac=$(mtd_get_mac_binary factory 40)
 		wan_mac=$(mtd_get_mac_binary factory 46)