X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fbase-files%2Fetc%2Fhotplug.d%2Ffirmware%2F10-rt2x00-eeprom;h=be6975c8094312ac24886b1f66e252b30d647471;hp=d8b35ae30e9fb67f27d943e4bc78770f044048cc;hb=8b1ac2ae372219d602e5c52ddfde3149e7a65dfd;hpb=ee8077f0feac7de4476b990bd462cc2b13fe63c0

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index d8b35ae30e..be6975c809 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -11,59 +11,104 @@ rt2x00_eeprom_extract() {
 	local count=$3
 	local mtd
 
-	. /etc/functions.sh
+	. /lib/functions.sh
 
 	mtd=$(find_mtd_part $part)
 	[ -n "$mtd" ] || \
 		rt2x00_eeprom_die "no mtd device found for partition $part"
 
-	dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count || \
+	dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
 		rt2x00_eeprom_die "failed to extract from $mtd"
 }
 
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-case "$FIRMWARE" in
-"RT288X.eeprom" | \
-"RT305X.eeprom")
-	. /lib/ramips.sh
+. /lib/ramips.sh
 
-	local board=$(ramips_board_name)
+board=$(ramips_board_name)
 
+case "$FIRMWARE" in
+"soc_wmac.eeprom")
 	case $board in
 	dir-300-b1 | \
 	dir-600-b1 | \
-	dir-600-b2)
+	dir-600-b2 | \
+	dir-615-d)
 		rt2x00_eeprom_extract "devdata" 16384 272
 		;;
 
+	dap-1350)
+		rt2x00_eeprom_extract "devdata" 0 272
+		;;
+
+	rt-n10-plus | \
 	rt-g32-b1)
 		rt2x00_eeprom_extract "devconf" 0 272
 		;;
 
+	f5d8235-v1 | \
 	f5d8235-v2)
 		rt2x00_eeprom_extract "u-boot" 262144 272
 		;;
 
+	3g-6200n | \
+	air3gii | \
+	all0239-3g | \
+	all0256n | \
+	all5002 | \
 	argus-atp52b | \
 	bc2 | \
+	broadway | \
+	carambola | \
+	dir-615-h1 | \
+	dir-620-a1 | \
+	esr-9753 | \
 	fonera20n | \
+	rt-n13u | \
+	freestation5 | \
 	hw550-3g | \
 	mofi3500-3gn | \
 	pwh2004 | \
 	nbg-419n | \
 	nw718 | \
+	omni-emb | \
+	psr-680w | \
 	rt-n15 | \
+	rt-n56u | \
+	sl-r7205 | \
+	v11st-fe | \
 	v22rw-2x2 | \
-	wcr150gn | \
+	w306r-v20 | \
+	w502u | \
+	wcr-150gn | \
 	whr-g300n | \
-	wr512-3gn)
+	wl-330n | \
+	wl-330n3g | \
+	wl-351 | \
+	wli-tx4-ag300n | \
+	wr512-3gn | \
+	wr6202 | \
+	mzk-w300nh2 | \
+	ur-336un | \
+	xdxrn502j)
 		rt2x00_eeprom_extract "factory" 0 272
 		;;
 
+	wl341v3)
+		rt2x00_eeprom_extract "board-nvram" 64880 272
+		;;
+
 	*)
 		rt2x00_eeprom_die "board $board is not supported yet"
 		;;
 	esac
 	;;
+
+"rt2x00pci_1_0.eeprom")
+	case $board in
+	rt-n56u)
+		rt2x00_eeprom_extract "factory" 32768 272
+		;;
+	esac
+	;;
 esac