X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FW150M.dts;h=d2f85740833219801b9e835be83ba7729beb3038;hp=9ac84a0f4b774b0beb1e84e41ff17d6474d5eafd;hb=70b192f57358f753842cbe1f8f82e26e8c6f9e1e;hpb=b70a96285c0f489be68bfea7a84a7950a58ddc79

diff --git a/target/linux/ramips/dts/W150M.dts b/target/linux/ramips/dts/W150M.dts
index 9ac84a0f4b..d2f8574083 100644
--- a/target/linux/ramips/dts/W150M.dts
+++ b/target/linux/ramips/dts/W150M.dts
@@ -2,10 +2,11 @@
 
 #include "rt3050.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "W150M", "ralink,rt3050-soc";
+	compatible = "tenda,w150m", "ralink,rt3050-soc";
 	model = "Tenda W150M";
 
 	cfi@1f000000 {
@@ -45,32 +46,32 @@
 
 		3grouter {
 			label = "w150m:blue:3grouter";
-			gpios = <&gpio0 11 1>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
 		};
 
 		ap {
 			label = "w150m:blue:ap";
-			gpios = <&gpio0 12 1>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 		};
 
 		wisprouter {
 			label = "w150m:blue:wisprouter";
-			gpios = <&gpio0 9 1>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 		};
 
 		wirelessrouter {
 			label = "w150m:blue:wirelessrouter";
-			gpios = <&gpio0 13 1>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 		};
 
 		3g {
 			label = "w150m:blue:3g";
-			gpios = <&gpio0 7 1>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 		};
 
 		wpsreset {
 			label = "w150m:blue:wpsreset";
-			gpios = <&gpio0 14 1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -82,13 +83,13 @@
 
 		reset {
 			label = "reset";
-			gpios = <&gpio0 0 1>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
 		};
 
 		mode {
 			label = "mode";
-			gpios = <&gpio0 10 1>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 	};