X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FY1.dtsi;h=0db064576fc26c77a93cbd13c0f1e4074f17f88c;hp=06db2bb3624bc4c32c022ed11932267700a2fecb;hb=198da20401f2216d92fb8a1539abcd4af743e0d8;hpb=04e4ff282ad359485afe34deb658f36ffb34c16f

diff --git a/target/linux/ramips/dts/Y1.dtsi b/target/linux/ramips/dts/Y1.dtsi
index 06db2bb362..0db064576f 100644
--- a/target/linux/ramips/dts/Y1.dtsi
+++ b/target/linux/ramips/dts/Y1.dtsi
@@ -1,105 +1,108 @@
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
+	compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc";
+
 	chosen {
 		bootargs = "console=ttyS0,115200";
 	};
-	
-	palmbus@10000000 {
-		sysc@0 {
-			ralink,gpiomux = "i2c", "jtag";
-			ralink,uartmux = "gpio";
-			ralink,wdtmux = <1>;
-		};
 
-		gpio0: gpio@600 {
-			status = "okay";
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
 		};
+	};
+};
+	
+&gpio0 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
 
-		gpio2: gpio@660 {
-			status = "okay";
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
 		};
 
-		gpio3: gpio@688 {
-			status = "okay";
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
 		};
 
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
 
-		spi@b00 {
-			status = "okay";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "w25q128";
-				reg = <0 0>;
-				linux,modalias = "m25p80", "w25q128";
-				spi-max-frequency = <10000000>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x30000>;
-					read-only;
-				};
-
-				partition@30000 {
-					label = "u-boot-env";
-					reg = <0x30000 0x10000>;
-					read-only;
-				};
-
-				factory: partition@40000 {
-					label = "factory";
-					reg = <0x40000 0x10000>;
-					read-only;
-				};
-
-				partition@50000 {
-					label = "firmware";
-					reg = <0x50000 0xfb0000>;
-				};
-			};
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0xfb0000>;
 		};
 	};
+};
 
-	ehci@101c0000 {
-		status = "okay";
-	};
+&ehci {
+	status = "okay";
+};
 
-	ohci@101c1000 {
-		status = "okay";
-	};
+&ohci {
+	status = "okay";
+};
 
-	pcie@10140000 {
-		status = "okay";
-	};
-	
-	wmac@10180000 {
-		ralink,mtd-eeprom = <&factory 0>;
-	};
+&pcie {
+	status = "okay";
 
-	pinctrl {
-		state_default: pinctrl0 {
-			gpio {
-				ralink,group = "uartf", "wled", "nd_sd";
-				ralink,function = "gpio";
-			};
-			pa {
-				ralink,group = "pa";
-				ralink,function = "pa";
-			};
+	pcie-bridge {
+		mt76@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			mediatek,mtd-eeprom = <&factory 0x8000>;
+			ieee80211-freq-limit = <5000000 6000000>;
 		};
 	};
+};
+	
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pa_pins>;
+};
 
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-		reset {
-			label = "reset";
-			gpios = <&gpio0 11 1>;
-			linux,code = <0x198>;
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "uartf", "wled", "nd_sd";
+			ralink,function = "gpio";
 		};
 	};
 };