X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FZBT-WG3526.dtsi;h=13443e0ffd16d206c2b660ca845209cdaaf17afe;hp=1a4b9d6d21996861dce38c90daa7bdca83d86543;hb=d492da702a2118b34ced9772586c5a6de68e70fd;hpb=6e3d7897f75e77ccbee6fde318b88a826920f3b6

diff --git a/target/linux/ramips/dts/ZBT-WG3526.dtsi b/target/linux/ramips/dts/ZBT-WG3526.dtsi
index 1a4b9d6d21..13443e0ffd 100644
--- a/target/linux/ramips/dts/ZBT-WG3526.dtsi
+++ b/target/linux/ramips/dts/ZBT-WG3526.dtsi
@@ -4,6 +4,15 @@
 #include <dt-bindings/input/input.h>
 
 / {
+	compatible = "zbtlink,zbt-wg3526", "mediatek,mt7621-soc";
+
+	aliases {
+		led-boot = &led_status;
+		led-failsafe = &led_status;
+		led-running = &led_status;
+		led-upgrade = &led_status;
+	};
+
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
@@ -21,8 +30,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		reset {
@@ -35,8 +42,9 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		status_led: status {
-			gpios = <&gpio0 24 1>;
+		led_status: status {
+			label = "zbt-wg3526:green:status";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
@@ -49,54 +57,63 @@
 	status = "okay";
 
 	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-
-		partition@30000 {
-			label = "u-boot-env";
-			reg = <0x30000 0x10000>;
-			read-only;
-		};
-
-		factory: partition@40000 {
-			label = "factory";
-			reg = <0x40000 0x10000>;
-			read-only;
-		};
-
-		firmware: partition@50000 {
-			label = "firmware";
+		m25p,chunked-io = <32>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			firmware: partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+			};
 		};
 	};
 };
 
 &pcie {
 	status = "okay";
+};
 
-	pcie0 {
-		wifi@14c3,7603 {
-			compatible = "pci14c3,7603";
-			reg = <0x0000 0 0 0 0>;
-			mediatek,mtd-eeprom = <&factory 0x0000>;
-			mediatek,5ghz = <0>;
-		};
+&pcie0 {
+	wifi@0,0 {
+		compatible = "pci14c3,7603";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0000>;
 	};
+};
+
+&pcie1 {
+	wifi@0,0 {
+		compatible = "pci14c3,7662";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x8000>;
+		ieee80211-freq-limit = <5000000 6000000>;
 
-	pcie1 {
-		wifi@14c3,7662 {
-			compatible = "pci14c3,7662";
-			reg = <0x0000 0 0 0 0>;
-			mediatek,mtd-eeprom = <&factory 0x8000>;
-			mediatek,2ghz = <0>;
+		led {
+			led-sources = <2>;
 		};
 	};
 };
@@ -108,7 +125,7 @@
 &pinctrl {
 	state_default: pinctrl0 {
 		gpio {
-			ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
+			ralink,group = "wdt", "rgmii2", "jtag", "mdio";
 			ralink,function = "gpio";
 		};
 	};