ar71xx: Add Support for the Bitmain Antminer S3
authorJohn Crispin <john@openwrt.org>
Tue, 7 Jul 2015 13:46:54 +0000 (13:46 +0000)
committerJohn Crispin <john@openwrt.org>
Tue, 7 Jul 2015 13:46:54 +0000 (13:46 +0000)
This patch adds support for the Bitmain Antminer S3 Cryptocurrency Miner

http://wiki.openwrt.org/toh/bitmain/s3

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 46236

target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
target/linux/ar71xx/base-files/etc/uci-defaults/02_network
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-3.18
target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c [new file with mode: 0644]
target/linux/ar71xx/generic/profiles/antminer.mk
target/linux/ar71xx/image/Makefile
target/linux/ar71xx/patches-3.18/905-MIPS-ath79-bitmain-antminer-s3-support.patch [new file with mode: 0644]
tools/firmware-utils/src/mktplinkfw.c

index f362571..b73e26d 100644 (file)
@@ -12,7 +12,8 @@ get_status_led() {
        all0305)
                status_led="eap7660d:green:ds4"
                ;;
-       antminer-s1)
+       antminer-s1|\
+       antminer-s3)
                status_led="bitmain:green:system"
                ;;
        ap132)
index ec7303c..89aefca 100644 (file)
@@ -36,6 +36,12 @@ antminer-s1)
        ucidef_set_led_wlan "wlan" "WLAN" "bitmain:green:wlan" "phy0tpt"
        ;;
 
+antminer-s3)
+       ucidef_set_led_wlan "wlan" "WLAN" "bitmain:green:wlan" "phy0tpt"
+       ucidef_set_led_default "sys" "SYS" "bitmain:green:sys" "0"
+       ucidef_set_led_default "lan" "LAN" "bitmain:yellow:lan" "0"
+       ;;
+
 ap113)
        ucidef_set_led_usbdev "usb" "USB" "ap113:green:usb" "1-1"
        ;;
index 6762adf..0eeae2b 100644 (file)
@@ -346,6 +346,7 @@ wp543)
        ;;
 
 antminer-s1 |\
+antminer-s3 |\
 dir-505-a1)
        ucidef_set_interface_lan "eth1"
        ;;
index 8dbc6af..df93557 100755 (executable)
@@ -110,6 +110,9 @@ tplink_board_detect() {
        "04440001"*)
                model="BITMAIN ANTMINER S1"
                ;;
+       "04440003"*)
+               model="BITMAIN ANTMINER S3"
+               ;;
        "120000"*)
                model="MERCURY MAC1200R"
                ;;
index c8eb8e4..a4de468 100755 (executable)
@@ -302,6 +302,7 @@ platform_check_image() {
                ;;
 
        antminer-s1 | \
+       antminer-s3 | \
        archer-c5 | \
        archer-c7 | \
        el-m150 | \
index 0af087d..3de7c53 100644 (file)
@@ -42,6 +42,7 @@ CONFIG_ATH79_MACH_AP96=y
 CONFIG_ATH79_MACH_ARCHER_C7=y
 CONFIG_ATH79_MACH_AW_NR580=y
 CONFIG_ATH79_MACH_ANTMINER_S1=y
+CONFIG_ATH79_MACH_ANTMINER_S3=y
 CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
 CONFIG_ATH79_MACH_CAP4200AG=y
 CONFIG_ATH79_MACH_CARAMBOLA2=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c
new file mode 100644 (file)
index 0000000..010c461
--- /dev/null
@@ -0,0 +1,98 @@
+/*
+ *   Bitmain Antminer S3 board support
+ *
+ *  Copyright (C) 2015 L. D. Pinney <ldpinney@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "dev-usb.h"
+
+#define ANTMINER_S3_GPIO_LED_WLAN              0
+#define ANTMINER_S3_GPIO_LED_SYSTEM            17
+#define ANTMINER_S3_GPIO_LED_LAN               22
+
+#define ANTMINER_S3_GPIO_BTN_RESET             11
+
+#define ANTMINER_S3_KEYSPOLL_INTERVAL  88      /* msecs */
+#define ANTMINER_S3_KEYSDEBOUNCE_INTERVAL (3 * ANTMINER_S3_KEYSPOLL_INTERVAL)
+
+static const char *ANTMINER_S3_part_probes[] = {
+       "tp-link",
+       NULL,
+};
+
+static struct flash_platform_data ANTMINER_S3_flash_data = {
+       .part_probes    = ANTMINER_S3_part_probes,
+};
+
+static struct gpio_led ANTMINER_S3_leds_gpio[] __initdata = {
+       {
+               .name           = "bitmain:green:wlan",
+               .gpio           = ANTMINER_S3_GPIO_LED_WLAN,
+               .active_low     = 0,
+       },{
+               .name           = "bitmain:green:system",
+               .gpio           = ANTMINER_S3_GPIO_LED_SYSTEM,
+               .active_low     = 0,
+       },{
+               .name           = "bitmain:yellow:lan",
+               .gpio           = ANTMINER_S3_GPIO_LED_LAN,
+               .active_low     = 0,
+       },
+};
+
+static struct gpio_keys_button ANTMINER_S3_GPIO_keys[] __initdata = {
+       {
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .debounce_interval = ANTMINER_S3_KEYSDEBOUNCE_INTERVAL,
+               .gpio           = ANTMINER_S3_GPIO_BTN_RESET,
+               .active_low     = 0,
+       },
+};
+
+static void __init antminer_s3_setup(void)
+{
+       u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+       /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+       ath79_setup_ar933x_phy4_switch(false, false);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ANTMINER_S3_leds_gpio),
+                                ANTMINER_S3_leds_gpio);
+
+       ath79_register_gpio_keys_polled(-1, ANTMINER_S3_KEYSPOLL_INTERVAL,
+                                       ARRAY_SIZE(ANTMINER_S3_GPIO_keys),
+                                       ANTMINER_S3_GPIO_keys);
+       ath79_register_usb();
+
+       ath79_register_m25p80(&ANTMINER_S3_flash_data);
+       ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+       ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+       ath79_register_mdio(0, 0x0);
+       ath79_register_eth(0);
+       ath79_register_eth(1);
+
+       ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_ANTMINER_S3, "ANTMINER-S3",
+            "Bitmain Antminer S3", antminer_s3_setup);
index 366982c..404133b 100644 (file)
@@ -15,3 +15,14 @@ define Profile/ANTMINER_S1/Description
        Package set optimized for the Bitmain Antminer S1.
 endef
 $(eval $(call Profile,ANTMINER_S1))
+
+define Profile/ANTMINER_S3
+       NAME:=Antminer S3
+       PACKAGES:=kmod-usb-core kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid
+endef
+
+
+define Profile/ANTMINER_S1/Description
+       Package set optimized for the Bitmain Antminer S3.
+endef
+$(eval $(call Profile,ANTMINER_S3))
index 3c05242..018385d 100644 (file)
@@ -338,6 +338,14 @@ define Device/antminer-s1
        CONSOLE := ttyATH0,115200
 endef
 
+define Device/antminer-s3
+       $(Device/tplink-8mlzma)
+       BOARDNAME := ANTMINER-S3
+       DEVICE_PROFILE := ANTMINER_S3
+       TPLINK_HWID := 0x04440003
+       CONSOLE := ttyATH0,115200
+endef
+
 define Device/el-m150
     $(Device/tplink-8mlzma)
     BOARDNAME := EL-M150
@@ -353,7 +361,7 @@ define Device/el-mini
     TPLINK_HWID := 0x01530001
     CONSOLE := ttyATH0,115200
 endef
-TARGET_DEVICES += antminer-s1 el-m150 el-mini
+TARGET_DEVICES += antminer-s1 antminer-s3 el-m150 el-mini
 
 define Device/gl-inet-6408A-v1
     $(Device/tplink-8mlzma)
diff --git a/target/linux/ar71xx/patches-3.18/905-MIPS-ath79-bitmain-antminer-s3-support.patch b/target/linux/ar71xx/patches-3.18/905-MIPS-ath79-bitmain-antminer-s3-support.patch
new file mode 100644 (file)
index 0000000..66eac1c
--- /dev/null
@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -22,6 +21,7 @@
+       ATH79_MACH_ALL0305,             /* Allnet ALL0305 */
+       ATH79_MACH_ALL0315N,            /* Allnet ALL0315N */
+       ATH79_MACH_ANTMINER_S1, /* Bitmain Antminer S1 */
++      ATH79_MACH_ANTMINER_S3, /* Bitmain Antminer S3 */
+       ATH79_MACH_AP113,               /* Atheros AP113 reference board */
+       ATH79_MACH_AP121,               /* Atheros AP121 reference board */
+       ATH79_MACH_AP121_MINI,          /* Atheros AP121-MINI reference board */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -66,6 +66,16 @@
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
++config ATH79_MACH_ANTMINER_S3
++      bool "Bitmain Antminer S3 support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
+ config ATH79_MACH_AP113
+       bool "Atheros AP113 board support"
+       select SOC_AR724X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -43,6 +43,7 @@
+ obj-$(CONFIG_ATH79_MACH_ALL0258N)     += mach-all0258n.o
+ obj-$(CONFIG_ATH79_MACH_ALL0315N)     += mach-all0315n.o
+ obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o
++obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o
+ obj-$(CONFIG_ATH79_MACH_AP113)                += mach-ap113.o
+ obj-$(CONFIG_ATH79_MACH_AP121)                += mach-ap121.o
+ obj-$(CONFIG_ATH79_MACH_AP132)                += mach-ap132.o
index 09536c6..8c543eb 100644 (file)
@@ -31,6 +31,7 @@
 
 #define HEADER_VERSION_V1      0x01000000
 #define HWID_ANTMINER_S1       0x04440001
+#define HWID_ANTMINER_S3       0x04440003
 #define HWID_GL_INET_V1                0x08000001
 #define HWID_GS_OOLITE_V1      0x3C000101
 #define HWID_TL_MR10U_V1       0x00100101