ipq40xx: fix OpenMesh A62 dtc warnings
authorChristian Lamparter <chunkeey@gmail.com>
Thu, 7 Jun 2018 15:36:57 +0000 (17:36 +0200)
committerJohn Crispin <john@phrozen.org>
Fri, 8 Jun 2018 07:31:36 +0000 (09:31 +0200)
Warning (pci_bridge): Node /soc/pci@40000000/pcie@0 missing ranges for PCI bridge (or not a bridge)
Warning (pci_bridge): Node /soc/pci@40000000/pcie@0 missing bus-range for PCI bridge
Warning (pci_bridge): Node /soc/pci@40000000/pcie@0/ath10k@0,0 node name is not "pci" or "pcie"
Warning (pci_bridge): Node /soc/pci@40000000/pcie@0/ath10k@0,0 missing ranges for PCI bridge (or not a bridge)
Warning (pci_bridge): Node /soc/pci@40000000/pcie@0/ath10k@0,0 incorrect #address-cells for PCI bridge
Warning (pci_bridge): Node /soc/pci@40000000/pcie@0/ath10k@0,0 incorrect #size-cells for PCI bridge
Warning (pci_bridge): Node /soc/pci@40000000/pcie@0/ath10k@0,0 missing bus-range for PCI bridge
Warning (unit_address_format): Failed prerequisite 'pci_bridge'
Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'

Cc: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Tested-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts

index dd6d6bd..b69e142 100644 (file)
        perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
        wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 
-       pcie@0 {
-               reg = <0 0 0 0 0>;
-               #interrupt-cells = <1>;
-               #size-cells = <2>;
+       bridge@0,0 {
+               reg = <0x00000000 0 0 0 0>;
                #address-cells = <3>;
-               device_type = "pci";
+               #size-cells = <2>;
+               ranges;
 
-               ath10k@0,0 {
+               wifi2: wifi@0,0 {
                        compatible = "qcom,ath10k";
                        status = "okay";
-                       reg = <0 0 0 0 0>;
-                       device_type = "pci";
+                       reg = <0x00010000 0 0 0 0>;
                        qcom,ath10k-calibration-variant = "OM-A62";
                };
        };