+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/spi-nor.h>
-
-#include "rtl838x-spi.h"
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-
-extern struct rtl83xx_soc_info soc_info;
-
-struct rtl838x_nor {
- struct spi_nor nor;
- struct device *dev;
- volatile void __iomem *base;
- bool fourByteMode;
- u32 chipSize;
- uint32_t flags;
- uint32_t io_status;
-};
-
-static uint32_t spi_prep(struct rtl838x_nor *rtl838x_nor)
-{
- /* Needed because of MMU constraints */
- SPI_WAIT_READY;
- spi_w32w(SPI_CS_INIT, SFCSR); //deactivate CS0, CS1
- spi_w32w(0, SFCSR); //activate CS0,CS1
- spi_w32w(SPI_CS_INIT, SFCSR); //deactivate CS0, CS1
-
- return (CS0 & rtl838x_nor->flags) ? (SPI_eCS0 & SPI_LEN_INIT)
- : ((SPI_eCS1 & SPI_LEN_INIT) | SFCSR_CHIP_SEL);
-}
-
-static uint32_t rtl838x_nor_get_SR(struct rtl838x_nor *rtl838x_nor)
-{
- uint32_t sfcsr, sfdr;
-
- sfcsr = spi_prep(rtl838x_nor);
- sfdr = (SPINOR_OP_RDSR)<<24;
-
- pr_debug("%s: rdid,sfcsr_val = %.8x,SFDR = %.8x\n", __func__, sfcsr, sfdr);
- pr_debug("rdid,sfcsr = %.8x\n", sfcsr | SPI_LEN4);
- spi_w32w(sfcsr, SFCSR);
- spi_w32w(sfdr, SFDR);
- spi_w32_mask(0, SPI_LEN4, SFCSR);
- SPI_WAIT_READY;
-
- return spi_r32(SFDR);
-}
-
-static void spi_write_disable(struct rtl838x_nor *rtl838x_nor)
-{
- uint32_t sfcsr, sfdr;
-
- sfcsr = spi_prep(rtl838x_nor);
- sfdr = (SPINOR_OP_WRDI) << 24;
- spi_w32w(sfcsr, SFCSR);
- spi_w32w(sfdr, SFDR);
- pr_debug("%s: sfcsr_val = %.8x,SFDR = %.8x", __func__, sfcsr, sfdr);
-
- spi_prep(rtl838x_nor);
-}
-
-static void spi_write_enable(struct rtl838x_nor *rtl838x_nor)
-{
- uint32_t sfcsr, sfdr;
-
- sfcsr = spi_prep(rtl838x_nor);
- sfdr = (SPINOR_OP_WREN) << 24;
- spi_w32w(sfcsr, SFCSR);
- spi_w32w(sfdr, SFDR);
- pr_debug("%s: sfcsr_val = %.8x,SFDR = %.8x", __func__, sfcsr, sfdr);
-
- spi_prep(rtl838x_nor);
-}
-
-static void spi_4b_set(struct rtl838x_nor *rtl838x_nor, bool enable)
-{
- uint32_t sfcsr, sfdr;
-
- sfcsr = spi_prep(rtl838x_nor);
- if (enable)
- sfdr = (SPINOR_OP_EN4B) << 24;
- else
- sfdr = (SPINOR_OP_EX4B) << 24;
-
- spi_w32w(sfcsr, SFCSR);
- spi_w32w(sfdr, SFDR);
- pr_debug("%s: sfcsr_val = %.8x,SFDR = %.8x", __func__, sfcsr, sfdr);
-
- spi_prep(rtl838x_nor);
-}
-
-static int rtl838x_get_addr_mode(struct rtl838x_nor *rtl838x_nor)
-{
- int res = 3;
- u32 reg;
-
- sw_w32(0x3, RTL838X_INT_RW_CTRL);
- if (!sw_r32(RTL838X_EXT_VERSION)) {
- if (sw_r32(RTL838X_STRAP_DBG) & (1 << 29))
- res = 4;
- } else {
- reg = sw_r32(RTL838X_PLL_CML_CTRL);
- if ((reg & (1 << 30)) && (reg & (1 << 31)))
- res = 4;
- if ((!(reg & (1 << 30)))
- && sw_r32(RTL838X_STRAP_DBG) & (1 << 29))
- res = 4;
- }
- sw_w32(0x0, RTL838X_INT_RW_CTRL);
- return res;
-}
-
-static int rtl8390_get_addr_mode(struct rtl838x_nor *rtl838x_nor)
-{
- if (spi_r32(RTL8390_SOC_SPI_MMIO_CONF) & (1 << 9))
- return 4;
- return 3;
-}
-
-ssize_t rtl838x_do_read(struct rtl838x_nor *rtl838x_nor, loff_t from,
- size_t length, u_char *buffer, uint8_t command)
-{
- uint32_t sfcsr, sfdr;
- uint32_t len = length;
-
- sfcsr = spi_prep(rtl838x_nor);
- sfdr = command << 24;
-
- /* Perform SPINOR_OP_READ: 1 byte command & 3 byte addr*/
- sfcsr |= SPI_LEN4;
- sfdr |= from;
-
- spi_w32w(sfcsr, SFCSR);
- spi_w32w(sfdr, SFDR);
-
- /* Read Data, 4 bytes at a time */
- while (length >= 4) {
- SPI_WAIT_READY;
- *((uint32_t *) buffer) = spi_r32(SFDR);
- buffer += 4;
- length -= 4;
- }
-
- /* The rest needs to be read 1 byte a time */
- sfcsr &= SPI_LEN_INIT|SPI_LEN1;
- SPI_WAIT_READY;
- spi_w32w(sfcsr, SFCSR);
- while (length > 0) {
- SPI_WAIT_READY;
- *(buffer) = spi_r32(SFDR) >> 24;
- buffer++;
- length--;
- }
- return len;
-}
-
-/*
- * Do fast read in 3 or 4 Byte addressing mode
- */
-static ssize_t rtl838x_do_4bf_read(struct rtl838x_nor *rtl838x_nor, loff_t from,
- size_t length, u_char *buffer, uint8_t command)
-{
- int sfcsr_addr_len = rtl838x_nor->fourByteMode ? 0x3 : 0x2;
- int sfdr_addr_shift = rtl838x_nor->fourByteMode ? 0 : 8;
- uint32_t sfcsr;
- uint32_t len = length;
-
- pr_debug("Fast read from %llx, len %x, shift %d\n",
- from, sfcsr_addr_len, sfdr_addr_shift);
- sfcsr = spi_prep(rtl838x_nor);
-
- /* Send read command */
- spi_w32w(sfcsr | SPI_LEN1, SFCSR);
- spi_w32w(command << 24, SFDR);
-
- /* Send address */
- spi_w32w(sfcsr | (sfcsr_addr_len << 28), SFCSR);
- spi_w32w(from << sfdr_addr_shift, SFDR);
-
- /* Dummy cycles */
- spi_w32w(sfcsr | SPI_LEN1, SFCSR);
- spi_w32w(0, SFDR);
-
- /* Start reading */
- spi_w32w(sfcsr | SPI_LEN4, SFCSR);
-
- /* Read Data, 4 bytes at a time */
- while (length >= 4) {
- SPI_WAIT_READY;
- *((uint32_t *) buffer) = spi_r32(SFDR);
- buffer += 4;
- length -= 4;
- }
-
- /* The rest needs to be read 1 byte a time */
- sfcsr &= SPI_LEN_INIT|SPI_LEN1;
- SPI_WAIT_READY;
- spi_w32w(sfcsr, SFCSR);
- while (length > 0) {
- SPI_WAIT_READY;
- *(buffer) = spi_r32(SFDR) >> 24;
- buffer++;
- length--;
- }
- return len;
-
-}
-
-/*
- * Do write (Page Programming) in 3 or 4 Byte addressing mode
- */
-static ssize_t rtl838x_do_4b_write(struct rtl838x_nor *rtl838x_nor, loff_t to,
- size_t length, const u_char *buffer,
- uint8_t command)
-{
- int sfcsr_addr_len = rtl838x_nor->fourByteMode ? 0x3 : 0x2;
- int sfdr_addr_shift = rtl838x_nor->fourByteMode ? 0 : 8;
- uint32_t sfcsr;
- uint32_t len = length;
-
- pr_debug("Write to %llx, len %x, shift %d\n",
- to, sfcsr_addr_len, sfdr_addr_shift);
- sfcsr = spi_prep(rtl838x_nor);
-
- /* Send write command, command IO-width is 1 (bit 25/26) */
- spi_w32w(sfcsr | SPI_LEN1 | (0 << 25), SFCSR);
- spi_w32w(command << 24, SFDR);
-
- /* Send address */
- spi_w32w(sfcsr | (sfcsr_addr_len << 28) | (0 << 25), SFCSR);
- spi_w32w(to << sfdr_addr_shift, SFDR);
-
- /* Write Data, 1 byte at a time, if we are not 4-byte aligned */
- if (((long)buffer) % 4) {
- spi_w32w(sfcsr | SPI_LEN1, SFCSR);
- while (length > 0 && (((long)buffer) % 4)) {
- SPI_WAIT_READY;
- spi_w32(*(buffer) << 24, SFDR);
- buffer += 1;
- length -= 1;
- }
- }
-
- /* Now we can write 4 bytes at a time */
- SPI_WAIT_READY;
- spi_w32w(sfcsr | SPI_LEN4, SFCSR);
- while (length >= 4) {
- SPI_WAIT_READY;
- spi_w32(*((uint32_t *)buffer), SFDR);
- buffer += 4;
- length -= 4;
- }
-
- /* Final bytes might need to be written 1 byte at a time, again */
- SPI_WAIT_READY;
- spi_w32w(sfcsr | SPI_LEN1, SFCSR);
- while (length > 0) {
- SPI_WAIT_READY;
- spi_w32(*(buffer) << 24, SFDR);
- buffer++;
- length--;
- }
- return len;
-}
-
-static ssize_t rtl838x_nor_write(struct spi_nor *nor, loff_t to, size_t len,
- const u_char *buffer)
-{
- int ret = 0;
- uint32_t offset = 0;
- struct rtl838x_nor *rtl838x_nor = nor->priv;
- size_t l = len;
- uint8_t cmd = SPINOR_OP_PP;
-
- /* Do write in 4-byte mode on large Macronix chips */
- if (rtl838x_nor->fourByteMode) {
- cmd = SPINOR_OP_PP_4B;
- spi_4b_set(rtl838x_nor, true);
- }
-
- pr_debug("In %s %8x to: %llx\n", __func__,
- (unsigned int) rtl838x_nor, to);
-
- while (l >= SPI_MAX_TRANSFER_SIZE) {
- while
- (rtl838x_nor_get_SR(rtl838x_nor) & SPI_WIP);
- do {
- spi_write_enable(rtl838x_nor);
- } while (!(rtl838x_nor_get_SR(rtl838x_nor) & SPI_WEL));
- ret = rtl838x_do_4b_write(rtl838x_nor, to + offset,
- SPI_MAX_TRANSFER_SIZE, buffer+offset, cmd);
- l -= SPI_MAX_TRANSFER_SIZE;
- offset += SPI_MAX_TRANSFER_SIZE;
- }
-
- if (l > 0) {
- while
- (rtl838x_nor_get_SR(rtl838x_nor) & SPI_WIP);
- do {
- spi_write_enable(rtl838x_nor);
- } while (!(rtl838x_nor_get_SR(rtl838x_nor) & SPI_WEL));
- ret = rtl838x_do_4b_write(rtl838x_nor, to+offset,
- len, buffer+offset, cmd);
- }
-
- return len;
-}
-
-static ssize_t rtl838x_nor_read(struct spi_nor *nor, loff_t from,
- size_t length, u_char *buffer)
-{
- uint32_t offset = 0;
- uint8_t cmd = SPINOR_OP_READ_FAST;
- size_t l = length;
- struct rtl838x_nor *rtl838x_nor = nor->priv;
-
- /* Do fast read in 3, or 4-byte mode on large Macronix chips */
- if (rtl838x_nor->fourByteMode) {
- cmd = SPINOR_OP_READ_FAST_4B;
- spi_4b_set(rtl838x_nor, true);
- }
-
- /* TODO: do timeout and return error */
- pr_debug("Waiting for pending writes\n");
- while
- (rtl838x_nor_get_SR(rtl838x_nor) & SPI_WIP);
- do {
- spi_write_enable(rtl838x_nor);
- } while (!(rtl838x_nor_get_SR(rtl838x_nor) & SPI_WEL));
-
- pr_debug("cmd is %d\n", cmd);
- pr_debug("%s: addr %.8llx to addr %.8x, cmd %.8x, size %d\n", __func__,
- from, (u32)buffer, (u32)cmd, length);
-
- while (l >= SPI_MAX_TRANSFER_SIZE) {
- rtl838x_do_4bf_read(rtl838x_nor, from + offset,
- SPI_MAX_TRANSFER_SIZE, buffer+offset, cmd);
- l -= SPI_MAX_TRANSFER_SIZE;
- offset += SPI_MAX_TRANSFER_SIZE;
- }
-
- if (l > 0)
- rtl838x_do_4bf_read(rtl838x_nor, from + offset, l, buffer+offset, cmd);
-
- return length;
-}
-
-static int rtl838x_erase(struct spi_nor *nor, loff_t offs)
-{
- struct rtl838x_nor *rtl838x_nor = nor->priv;
- int sfcsr_addr_len = rtl838x_nor->fourByteMode ? 0x3 : 0x2;
- int sfdr_addr_shift = rtl838x_nor->fourByteMode ? 0 : 8;
- uint32_t sfcsr;
- uint8_t cmd = SPINOR_OP_SE;
-
- pr_debug("Erasing sector at %llx\n", offs);
-
- /* Do erase in 4-byte mode on large Macronix chips */
- if (rtl838x_nor->fourByteMode) {
- cmd = SPINOR_OP_SE_4B;
- spi_4b_set(rtl838x_nor, true);
- }
- /* TODO: do timeout and return error */
- while
- (rtl838x_nor_get_SR(rtl838x_nor) & SPI_WIP);
- do {
- spi_write_enable(rtl838x_nor);
- } while (!(rtl838x_nor_get_SR(rtl838x_nor) & SPI_WEL));
-
- sfcsr = spi_prep(rtl838x_nor);
-
- /* Send erase command, command IO-width is 1 (bit 25/26) */
- spi_w32w(sfcsr | SPI_LEN1 | (0 << 25), SFCSR);
- spi_w32w(cmd << 24, SFDR);
-
- /* Send address */
- spi_w32w(sfcsr | (sfcsr_addr_len << 28) | (0 << 25), SFCSR);
- spi_w32w(offs << sfdr_addr_shift, SFDR);
-
- return 0;
-}
-
-static int rtl838x_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
-{
- int length = len;
- u8 *buffer = buf;
- uint32_t sfcsr, sfdr;
- struct rtl838x_nor *rtl838x_nor = nor->priv;
-
- pr_debug("In %s: opcode %x, len %x\n", __func__, opcode, len);
-
- sfcsr = spi_prep(rtl838x_nor);
- sfdr = opcode << 24;
-
- sfcsr |= SPI_LEN1;
-
- spi_w32w(sfcsr, SFCSR);
- spi_w32w(sfdr, SFDR);
-
- while (length > 0) {
- SPI_WAIT_READY;
- *(buffer) = spi_r32(SFDR) >> 24;
- buffer++;
- length--;
- }
-
- return len;
-}
-
-static int rtl838x_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
-{
- uint32_t sfcsr, sfdr;
- struct rtl838x_nor *rtl838x_nor = nor->priv;
-
- pr_debug("In %s, opcode %x, len %x\n", __func__, opcode, len);
- sfcsr = spi_prep(rtl838x_nor);
- sfdr = opcode << 24;
-
- if (len == 1) { /* SPINOR_OP_WRSR */
- sfdr |= buf[0];
- sfcsr |= SPI_LEN2;
- }
- spi_w32w(sfcsr, SFCSR);
- spi_w32w(sfdr, SFDR);
- return 0;
-}
-
-static int spi_enter_sio(struct spi_nor *nor)
-{
- uint32_t sfcsr, sfcr2, sfdr;
- uint32_t ret = 0, reg = 0, size_bits;
- struct rtl838x_nor *rtl838x_nor = nor->priv;
-
- pr_debug("In %s\n", __func__);
- rtl838x_nor->io_status = 0;
- sfdr = SPI_C_RSTQIO << 24;
- sfcsr = spi_prep(rtl838x_nor);
-
- reg = spi_r32(SFCR2);
- pr_debug("SFCR2: %x, size %x, rdopt: %x\n", reg, SFCR2_GETSIZE(reg),
- (reg & SFCR2_RDOPT));
- size_bits = rtl838x_nor->fourByteMode ? SFCR2_SIZE(0x6) : SFCR2_SIZE(0x7);
-
- sfcr2 = SFCR2_HOLD_TILL_SFDR2 | size_bits
- | (reg & SFCR2_RDOPT) | SFCR2_CMDIO(0)
- | SFCR2_ADDRIO(0) | SFCR2_DUMMYCYCLE(4)
- | SFCR2_DATAIO(0) | SFCR2_SFCMD(SPINOR_OP_READ_FAST);
- pr_debug("SFCR2: %x, size %x\n", reg, SFCR2_GETSIZE(reg));
-
- SPI_WAIT_READY;
- spi_w32w(sfcr2, SFCR2);
- spi_w32w(sfcsr, SFCSR);
- spi_w32w(sfdr, SFDR);
-
- spi_w32_mask(SFCR2_HOLD_TILL_SFDR2, 0, SFCR2);
- rtl838x_nor->io_status &= ~IOSTATUS_CIO_MASK;
- rtl838x_nor->io_status |= CIO1;
-
- spi_prep(rtl838x_nor);
-
- return ret;
-}
-
-int rtl838x_spi_nor_scan(struct spi_nor *nor, const char *name)
-{
- static const struct spi_nor_hwcaps hwcaps = {
- .mask = SNOR_HWCAPS_READ | SNOR_HWCAPS_PP
- | SNOR_HWCAPS_READ_FAST
- };
-
- struct rtl838x_nor *rtl838x_nor = nor->priv;
-
- pr_debug("In %s\n", __func__);
-
- spi_w32_mask(0, SFCR_EnableWBO, SFCR);
- spi_w32_mask(0, SFCR_EnableRBO, SFCR);
-
- rtl838x_nor->flags = CS0 | R_MODE;
-
- spi_nor_scan(nor, NULL, &hwcaps);
- pr_debug("------------- Got size: %llx\n", nor->mtd.size);
-
- return 0;
-}
-
-int rtl838x_nor_init(struct rtl838x_nor *rtl838x_nor,
- struct device_node *flash_node)
-{
- int ret;
- struct spi_nor *nor;
-
- pr_info("%s called\n", __func__);
- nor = &rtl838x_nor->nor;
- nor->dev = rtl838x_nor->dev;
- nor->priv = rtl838x_nor;
- spi_nor_set_flash_node(nor, flash_node);
-
- nor->read_reg = rtl838x_nor_read_reg;
- nor->write_reg = rtl838x_nor_write_reg;
- nor->read = rtl838x_nor_read;
- nor->write = rtl838x_nor_write;
- nor->erase = rtl838x_erase;
- nor->mtd.name = "rtl838x_nor";
- nor->erase_opcode = rtl838x_nor->fourByteMode ? SPINOR_OP_SE_4B
- : SPINOR_OP_SE;
- /* initialized with NULL */
- ret = rtl838x_spi_nor_scan(nor, NULL);
- if (ret)
- return ret;
-
- spi_enter_sio(nor);
- spi_write_disable(rtl838x_nor);
-
- ret = mtd_device_parse_register(&nor->mtd, NULL, NULL, NULL, 0);
- return ret;
-}
-
-static int rtl838x_nor_drv_probe(struct platform_device *pdev)
-{
- struct device_node *flash_np;
- struct resource *res;
- int ret;
- struct rtl838x_nor *rtl838x_nor;
- int addrMode;
-
- pr_info("Initializing rtl838x_nor_driver\n");
- if (!pdev->dev.of_node) {
- dev_err(&pdev->dev, "No DT found\n");
- return -EINVAL;
- }
-
- rtl838x_nor = devm_kzalloc(&pdev->dev, sizeof(*rtl838x_nor), GFP_KERNEL);
- if (!rtl838x_nor)
- return -ENOMEM;
- platform_set_drvdata(pdev, rtl838x_nor);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- rtl838x_nor->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR((void *)rtl838x_nor->base))
- return PTR_ERR((void *)rtl838x_nor->base);
-
- pr_info("SPI resource base is %08x\n", (u32)rtl838x_nor->base);
- rtl838x_nor->dev = &pdev->dev;
-
- /* only support one attached flash */
- flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
- if (!flash_np) {
- dev_err(&pdev->dev, "no SPI flash device to configure\n");
- ret = -ENODEV;
- goto nor_free;
- }
-
- /* Get the 3/4 byte address mode as configure by bootloader */
- if (soc_info.family == RTL8390_FAMILY_ID)
- addrMode = rtl8390_get_addr_mode(rtl838x_nor);
- else
- addrMode = rtl838x_get_addr_mode(rtl838x_nor);
- pr_info("Address mode is %d bytes\n", addrMode);
- if (addrMode == 4)
- rtl838x_nor->fourByteMode = true;
-
- ret = rtl838x_nor_init(rtl838x_nor, flash_np);
-
-nor_free:
- return ret;
-}
-
-static int rtl838x_nor_drv_remove(struct platform_device *pdev)
-{
-/* struct rtl8xx_nor *rtl838x_nor = platform_get_drvdata(pdev); */
- return 0;
-}
-
-static const struct of_device_id rtl838x_nor_of_ids[] = {
- { .compatible = "realtek,rtl838x-nor"},
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, rtl838x_nor_of_ids);
-
-static struct platform_driver rtl838x_nor_driver = {
- .probe = rtl838x_nor_drv_probe,
- .remove = rtl838x_nor_drv_remove,
- .driver = {
- .name = "rtl838x-nor",
- .pm = NULL,
- .of_match_table = rtl838x_nor_of_ids,
- },
-};
-
-module_platform_driver(rtl838x_nor_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("RTL838x SPI NOR Flash Driver");
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2009 Realtek Semiconductor Corp.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _RTL838X_SPI_H
-#define _RTL838X_SPI_H
-
-
-/*
- * Register access macros
- */
-
-#define spi_r32(reg) readl(rtl838x_nor->base + reg)
-#define spi_w32(val, reg) writel(val, rtl838x_nor->base + reg)
-#define spi_w32_mask(clear, set, reg) \
- spi_w32((spi_r32(reg) & ~(clear)) | (set), reg)
-
-#define SPI_WAIT_READY do { \
- } while (!(spi_r32(SFCSR) & SFCSR_SPI_RDY))
-
-#define spi_w32w(val, reg) do { \
- writel(val, rtl838x_nor->base + reg); \
- SPI_WAIT_READY; \
- } while (0)
-
-#define SFCR (0x00) /*SPI Flash Configuration Register*/
- #define SFCR_CLK_DIV(val) ((val)<<29)
- #define SFCR_EnableRBO (1<<28)
- #define SFCR_EnableWBO (1<<27)
- #define SFCR_SPI_TCS(val) ((val)<<23) /*4 bit, 1111 */
-
-#define SFCR2 (0x04) /*For memory mapped I/O */
- #define SFCR2_SFCMD(val) ((val)<<24) /*8 bit, 1111_1111 */
- #define SFCR2_SIZE(val) ((val)<<21) /*3 bit, 111 */
- #define SFCR2_RDOPT (1<<20)
- #define SFCR2_CMDIO(val) ((val)<<18) /*2 bit, 11 */
- #define SFCR2_ADDRIO(val) ((val)<<16) /*2 bit, 11 */
- #define SFCR2_DUMMYCYCLE(val) ((val)<<13) /*3 bit, 111 */
- #define SFCR2_DATAIO(val) ((val)<<11) /*2 bit, 11 */
- #define SFCR2_HOLD_TILL_SFDR2 (1<<10)
- #define SFCR2_GETSIZE(x) (((x)&0x00E00000)>>21)
-
-#define SFCSR (0x08) /*SPI Flash Control&Status Register*/
- #define SFCSR_SPI_CSB0 (1<<31)
- #define SFCSR_SPI_CSB1 (1<<30)
- #define SFCSR_LEN(val) ((val)<<28) /*2 bits*/
- #define SFCSR_SPI_RDY (1<<27)
- #define SFCSR_IO_WIDTH(val) ((val)<<25) /*2 bits*/
- #define SFCSR_CHIP_SEL (1<<24)
- #define SFCSR_CMD_BYTE(val) ((val)<<16) /*8 bit, 1111_1111 */
-
-#define SFDR (0x0C) /*SPI Flash Data Register*/
-#define SFDR2 (0x10) /*SPI Flash Data Register - for post SPI bootup setting*/
- #define SPI_CS_INIT (SFCSR_SPI_CSB0 | SFCSR_SPI_CSB1 | SPI_LEN1)
- #define SPI_CS0 SFCSR_SPI_CSB0
- #define SPI_CS1 SFCSR_SPI_CSB1
- #define SPI_eCS0 ((SFCSR_SPI_CSB1)) /*and SFCSR to active CS0*/
- #define SPI_eCS1 ((SFCSR_SPI_CSB0)) /*and SFCSR to active CS1*/
-
- #define SPI_WIP (1) /* Write In Progress */
- #define SPI_WEL (1<<1) /* Write Enable Latch*/
- #define SPI_SST_QIO_WIP (1<<7) /* SST QIO Flash Write In Progress */
- #define SPI_LEN_INIT 0xCFFFFFFF /* and SFCSR to init */
- #define SPI_LEN4 0x30000000 /* or SFCSR to set */
- #define SPI_LEN3 0x20000000 /* or SFCSR to set */
- #define SPI_LEN2 0x10000000 /* or SFCSR to set */
- #define SPI_LEN1 0x00000000 /* or SFCSR to set */
- #define SPI_SETLEN(val) do { \
- SPI_REG(SFCSR) &= 0xCFFFFFFF; \
- SPI_REG(SFCSR) |= (val-1)<<28; \
- } while (0)
-/*
- * SPI interface control
- */
-#define RTL8390_SOC_SPI_MMIO_CONF (0x04)
-
-#define IOSTATUS_CIO_MASK (0x00000038)
-
-/* Chip select: bits 4-7*/
-#define CS0 (1<<4)
-#define R_MODE 0x04
-
-/* io_status */
-#define IO1 (1<<0)
-#define IO2 (1<<1)
-#define CIO1 (1<<3)
-#define CIO2 (1<<4)
-#define CMD_IO1 (1<<6)
-#define W_ADDR_IO1 ((1)<<12)
-#define R_ADDR_IO2 ((2)<<9)
-#define R_DATA_IO2 ((2)<<15)
-#define W_DATA_IO1 ((1)<<18)
-
-/* Commands */
-#define SPI_C_RSTQIO 0xFF
-
-#define SPI_MAX_TRANSFER_SIZE 256
-
-#endif /* _RTL838X_SPI_H */
projects / openwrt / openwrt.git / commitdiff