From 6f933347d0b4ed02d9534f5fa07f7b99f13eeaa1 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:12:28 +0200
-Subject: [PATCH 01/31] MIPS: lantiq: add pcie driver
+Subject: [PATCH 01/36] MIPS: lantiq: add pcie driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
From 17348293f7f8103c97c8d2a6b0ef36eae06ec371 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 13 Mar 2013 09:36:16 +0100
-Subject: [PATCH 02/31] MIPS: lantiq: dtb image hack
+Subject: [PATCH 02/36] MIPS: lantiq: dtb image hack
Signed-off-by: John Crispin <blogic@openwrt.org>
---
From 16e315864132b59749faff739230daf4cee9abbb Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 13 Mar 2013 10:04:01 +0100
-Subject: [PATCH 03/31] MIPS: lantiq: handle vmmc memory reservation
+Subject: [PATCH 03/36] MIPS: lantiq: handle vmmc memory reservation
Signed-off-by: John Crispin <blogic@openwrt.org>
---
From 9afadf01b1be371ee88491819aa67364684461f9 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 3 Aug 2012 10:27:25 +0200
-Subject: [PATCH 04/31] MIPS: lantiq: add atm hack
+Subject: [PATCH 04/36] MIPS: lantiq: add atm hack
Signed-off-by: John Crispin <blogic@openwrt.org>
---
From 223f1c46e109a8420765aee099a5d1dc4ab7ee98 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 3 Sep 2013 13:18:12 +0200
-Subject: [PATCH 05/31] MIPS: lantiq: add reset-controller api support
+Subject: [PATCH 05/36] MIPS: lantiq: add reset-controller api support
Add a reset-controller binding for the reset registers found on the lantiq
SoC.
From f81979f4b297693ac70616feaa4a79bdcb11db35 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:55:57 +0200
-Subject: [PATCH 06/31] MIPS: lantiq: reboot gphy on restart
+Subject: [PATCH 06/36] MIPS: lantiq: reboot gphy on restart
Signed-off-by: John Crispin <blogic@openwrt.org>
---
From d27ec8bb97db0f60d81ab255d51ac4e967362067 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:34:19 +0200
-Subject: [PATCH 07/31] MIPS: lantiq: add basic tffs driver
+Subject: [PATCH 07/36] MIPS: lantiq: add basic tffs driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
From 94800350cb8d2f29dda2206b5e9a3772024ee168 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:30:56 +0200
-Subject: [PATCH 08/31] MIPS: lantiq: backport old timer code
+Subject: [PATCH 08/36] MIPS: lantiq: backport old timer code
Signed-off-by: John Crispin <blogic@openwrt.org>
---
--- /dev/null
+From ed348924cd59ef0c8a4bc4e015e2b7e581a00fa8 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 12 Aug 2014 21:40:41 +0200
+Subject: [PATCH 09/36] MIPS: lantiq: command line work around
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/prom.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
+index 202e118..227feed 100644
+--- a/arch/mips/lantiq/prom.c
++++ b/arch/mips/lantiq/prom.c
+@@ -74,6 +74,8 @@ void __init plat_mem_setup(void)
+ * parsed resulting in our memory appearing
+ */
+ __dt_setup_arch(&__image_dtb);
++
++ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+ }
+
+ void __init device_tree_init(void)
+--
+1.7.10.4
+
+++ /dev/null
-From 29452de974f2cdc87876dbdc18a16405ef80c05f Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 9 Aug 2013 20:38:15 +0200
-Subject: [PATCH 09/31] pinctrl/lantiq: fix up pinmux
-
-We found out how to set the gphy led pinmuxing.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++++++++++++++--
- 1 file changed, 26 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
-index e66f4ca..b5f43c8 100644
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -609,10 +609,9 @@ static struct pinctrl_desc xway_pctrl_desc = {
- .confops = &xway_pinconf_ops,
- };
-
--static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
-+static int mux_apply(struct ltq_pinmux_info *info,
- int pin, int mux)
- {
-- struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
- int port = PORT(pin);
- u32 alt1_reg = GPIO_ALT1(pin);
-
-@@ -632,6 +631,14 @@ static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
- return 0;
- }
-
-+static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
-+ int pin, int mux)
-+{
-+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return mux_apply(info, pin, mux);
-+}
-+
- static const struct ltq_cfg_param xway_cfg_params[] = {
- {"lantiq,pull", LTQ_PINCONF_PARAM_PULL},
- {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN},
-@@ -676,6 +683,10 @@ static int xway_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, int val)
- {
- struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
-
-+ if (PORT(pin) == PORT3)
-+ gpio_setbit(info->membase[0], GPIO3_OD, PORT_PIN(pin));
-+ else
-+ gpio_setbit(info->membase[0], GPIO_OD(pin), PORT_PIN(pin));
- gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin));
- xway_gpio_set(chip, pin, val);
-
-@@ -696,6 +707,18 @@ static void xway_gpio_free(struct gpio_chip *chip, unsigned offset)
- pinctrl_free_gpio(gpio);
- }
-
-+static int xway_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
-+ int i;
-+
-+ for (i = 0; i < info->num_exin; i++)
-+ if (info->exin[i] == offset)
-+ return ltq_eiu_get_irq(i);
-+
-+ return -1;
-+}
-+
- static struct gpio_chip xway_chip = {
- .label = "gpio-xway",
- .direction_input = xway_gpio_dir_in,
-@@ -704,6 +727,7 @@ static struct gpio_chip xway_chip = {
- .set = xway_gpio_set,
- .request = xway_gpio_req,
- .free = xway_gpio_free,
-+ .to_irq = xway_gpio_to_irq,
- .base = -1,
- };
-
---
-1.7.10.4
-
--- /dev/null
+From 6804142b47f2634b0657e4dfcec7a34e982b6ddb Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 10 Sep 2014 22:29:21 +0200
+Subject: [PATCH 10/36] MIPS: lantiq: export soc type
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+---
+ arch/mips/include/asm/mach-lantiq/lantiq.h | 2 ++
+ arch/mips/lantiq/prom.c | 5 +++++
+ 2 files changed, 7 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
+index f196cce..4e5ae65 100644
+--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
++++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
+@@ -48,6 +48,8 @@ extern struct clk *clk_get_ppe(void);
+ extern unsigned char ltq_boot_select(void);
+ /* find out what caused the last cpu reset */
+ extern int ltq_reset_cause(void);
++/* find out the soc type */
++extern int ltq_soc_type(void);
+
+ #define IOPORT_RESOURCE_START 0x10000000
+ #define IOPORT_RESOURCE_END 0xffffffff
+diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
+index 227feed..4c652c6 100644
+--- a/arch/mips/lantiq/prom.c
++++ b/arch/mips/lantiq/prom.c
+@@ -36,6 +36,11 @@ const char *get_system_type(void)
+ return soc_info.sys_type;
+ }
+
++int ltq_soc_type(void)
++{
++ return soc_info.type;
++}
++
+ void prom_free_prom_memory(void)
+ {
+ }
+--
+1.7.10.4
+
+++ /dev/null
-From 9f921445b6dbf2beef397c6aa038db135e92eb80 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 10:02:58 +0100
-Subject: [PATCH 10/31] owrt: lantiq: wifi and ethernet eeprom handling
-
----
- arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h | 6 +
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 +
- arch/mips/lantiq/xway/Makefile | 3 +
- arch/mips/lantiq/xway/ath_eep.c | 277 ++++++++++++++++++++
- arch/mips/lantiq/xway/eth_mac.c | 76 ++++++
- arch/mips/lantiq/xway/pci-ath-fixup.c | 109 ++++++++
- arch/mips/lantiq/xway/rt_eep.c | 60 +++++
- 7 files changed, 534 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
- create mode 100644 arch/mips/lantiq/xway/ath_eep.c
- create mode 100644 arch/mips/lantiq/xway/eth_mac.c
- create mode 100644 arch/mips/lantiq/xway/pci-ath-fixup.c
- create mode 100644 arch/mips/lantiq/xway/rt_eep.c
-
-diff --git a/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
-new file mode 100644
-index 0000000..095d261
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
-@@ -0,0 +1,6 @@
-+#ifndef _PCI_ATH_FIXUP
-+#define _PCI_ATH_FIXUP
-+
-+void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
-+
-+#endif /* _PCI_ATH_FIXUP */
-diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-index 133336b..779715c 100644
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -90,5 +90,8 @@ int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr);
- extern void ltq_pmu_enable(unsigned int module);
- extern void ltq_pmu_disable(unsigned int module);
-
-+/* allow the ethernet driver to load a flash mapped mac addr */
-+const u8* ltq_get_eth_mac(void);
-+
- #endif /* CONFIG_SOC_TYPE_XWAY */
- #endif /* _LTQ_XWAY_H__ */
-diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
-index 2dd442c..de876e1 100644
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -2,4 +2,7 @@ obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
-
- obj-y += vmmc.o tffs.o
-
-+obj-y += eth_mac.o
-+obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
-+
- obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
-diff --git a/arch/mips/lantiq/xway/ath_eep.c b/arch/mips/lantiq/xway/ath_eep.c
-new file mode 100644
-index 0000000..cd07f9a
---- /dev/null
-+++ b/arch/mips/lantiq/xway/ath_eep.c
-@@ -0,0 +1,277 @@
-+/*
-+ * Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
-+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
-+ * Copyright (C) 2013 Álvaro Fernández Rojas <noltari@gmail.com>
-+ * Copyright (C) 2013 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ath5k_platform.h>
-+#include <linux/ath9k_platform.h>
-+#include <linux/pci.h>
-+#include <linux/err.h>
-+#include <linux/mtd/mtd.h>
-+#include <pci-ath-fixup.h>
-+#include <lantiq_soc.h>
-+
-+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
-+struct ath5k_platform_data ath5k_pdata;
-+struct ath9k_platform_data ath9k_pdata = {
-+ .led_pin = -1,
-+};
-+static u8 athxk_eeprom_mac[6];
-+
-+static int ath9k_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+ dev->dev.platform_data = &ath9k_pdata;
-+ return 0;
-+}
-+
-+static int ath9k_eep_load;
-+int __init of_ath9k_eeprom_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node, *mtd_np;
-+ struct resource *eep_res, *mac_res = NULL;
-+ void __iomem *eep, *mac;
-+ int mac_offset;
-+ u32 mac_inc = 0, pci_slot = 0;
-+ int i;
-+ struct mtd_info *the_mtd;
-+ size_t flash_readlen;
-+ const __be32 *list;
-+ const char *part;
-+ phandle phandle;
-+
-+ if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
-+ sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
-+ (mtd_np = of_find_node_by_phandle(phandle)) && ((part =
-+ of_get_property(mtd_np, "label", NULL)) || (part =
-+ mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
-+ != ERR_PTR(-ENODEV)) {
-+ i = mtd_read(the_mtd, be32_to_cpup(list),
-+ ATH9K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
-+ (void *) ath9k_pdata.eeprom_data);
-+ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
-+ size_t mac_readlen;
-+ mtd_read(the_mtd, mac_offset, 6, &mac_readlen,
-+ (void *) athxk_eeprom_mac);
-+ }
-+ put_mtd_device(the_mtd);
-+ if ((sizeof(ath9k_pdata.eeprom_data) != flash_readlen) || i) {
-+ dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
-+ return -ENODEV;
-+ }
-+ } else {
-+ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+
-+ if (!eep_res) {
-+ dev_err(&pdev->dev, "failed to load eeprom address\n");
-+ return -ENODEV;
-+ }
-+ if (resource_size(eep_res) != ATH9K_PLAT_EEP_MAX_WORDS << 1) {
-+ dev_err(&pdev->dev, "eeprom has an invalid size\n");
-+ return -EINVAL;
-+ }
-+
-+ eep = ioremap(eep_res->start, resource_size(eep_res));
-+ memcpy_fromio(ath9k_pdata.eeprom_data, eep,
-+ ATH9K_PLAT_EEP_MAX_WORDS << 1);
-+ }
-+
-+ if (of_find_property(np, "ath,eep-swap", NULL))
-+ for (i = 0; i < ATH9K_PLAT_EEP_MAX_WORDS; i++)
-+ ath9k_pdata.eeprom_data[i] = swab16(ath9k_pdata.eeprom_data[i]);
-+
-+ if (of_find_property(np, "ath,eep-endian", NULL)) {
-+ ath9k_pdata.endian_check = true;
-+
-+ dev_info(&pdev->dev, "endian check enabled.\n");
-+ }
-+
-+ if (!is_valid_ether_addr(athxk_eeprom_mac)) {
-+ if (mac_res) {
-+ if (resource_size(mac_res) != 6) {
-+ dev_err(&pdev->dev, "mac has an invalid size\n");
-+ return -EINVAL;
-+ }
-+ mac = ioremap(mac_res->start, resource_size(mac_res));
-+ memcpy_fromio(athxk_eeprom_mac, mac, 6);
-+ } else if (ltq_get_eth_mac()) {
-+ memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
-+ }
-+ }
-+ if (!is_valid_ether_addr(athxk_eeprom_mac)) {
-+ dev_warn(&pdev->dev, "using random mac\n");
-+ random_ether_addr(athxk_eeprom_mac);
-+ }
-+
-+ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
-+ athxk_eeprom_mac[5] += mac_inc;
-+
-+ ath9k_pdata.macaddr = athxk_eeprom_mac;
-+ ltq_pci_plat_dev_init = ath9k_pci_plat_dev_init;
-+
-+ if (!of_property_read_u32(np, "ath,pci-slot", &pci_slot)) {
-+ ltq_pci_ath_fixup(pci_slot, ath9k_pdata.eeprom_data);
-+
-+ dev_info(&pdev->dev, "pci slot: %u\n", pci_slot);
-+ if (ath9k_eep_load) {
-+ struct pci_dev *d = NULL;
-+ while ((d = pci_get_device(PCI_VENDOR_ID_ATHEROS,
-+ PCI_ANY_ID, d)) != NULL)
-+ pci_fixup_device(pci_fixup_early, d);
-+ }
-+
-+ }
-+
-+ dev_info(&pdev->dev, "loaded ath9k eeprom\n");
-+
-+ return 0;
-+}
-+
-+static struct of_device_id ath9k_eeprom_ids[] = {
-+ { .compatible = "ath9k,eeprom" },
-+ { }
-+};
-+
-+static struct platform_driver ath9k_eeprom_driver = {
-+ .driver = {
-+ .name = "ath9k,eeprom",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(ath9k_eeprom_ids),
-+ },
-+};
-+
-+static int __init of_ath9k_eeprom_init(void)
-+{
-+ int ret = platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
-+
-+ if (ret)
-+ ath9k_eep_load = 1;
-+
-+ return ret;
-+}
-+
-+static int __init of_ath9k_eeprom_init_late(void)
-+{
-+ if (!ath9k_eep_load)
-+ return 0;
-+ return platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
-+}
-+late_initcall(of_ath9k_eeprom_init_late);
-+subsys_initcall(of_ath9k_eeprom_init);
-+
-+
-+static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+ dev->dev.platform_data = &ath5k_pdata;
-+ return 0;
-+}
-+
-+int __init of_ath5k_eeprom_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node, *mtd_np;
-+ struct resource *eep_res, *mac_res = NULL;
-+ void __iomem *eep, *mac;
-+ int mac_offset;
-+ u32 mac_inc = 0;
-+ int i;
-+ struct mtd_info *the_mtd;
-+ size_t flash_readlen;
-+ const __be32 *list;
-+ const char *part;
-+ phandle phandle;
-+
-+ if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
-+ sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
-+ (mtd_np = of_find_node_by_phandle(phandle)) && ((part =
-+ of_get_property(mtd_np, "label", NULL)) || (part =
-+ mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
-+ != ERR_PTR(-ENODEV)) {
-+ i = mtd_read(the_mtd, be32_to_cpup(list),
-+ ATH5K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
-+ (void *) ath5k_pdata.eeprom_data);
-+ put_mtd_device(the_mtd);
-+ if ((sizeof(ATH5K_PLAT_EEP_MAX_WORDS << 1) != flash_readlen)
-+ || i) {
-+ dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
-+ return -ENODEV;
-+ }
-+ } else {
-+ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+
-+ if (!eep_res) {
-+ dev_err(&pdev->dev, "failed to load eeprom address\n");
-+ return -ENODEV;
-+ }
-+ if (resource_size(eep_res) != ATH5K_PLAT_EEP_MAX_WORDS << 1) {
-+ dev_err(&pdev->dev, "eeprom has an invalid size\n");
-+ return -EINVAL;
-+ }
-+
-+ eep = ioremap(eep_res->start, resource_size(eep_res));
-+ ath5k_pdata.eeprom_data = kmalloc(ATH5K_PLAT_EEP_MAX_WORDS<<1,
-+ GFP_KERNEL);
-+ memcpy_fromio(ath5k_pdata.eeprom_data, eep,
-+ ATH5K_PLAT_EEP_MAX_WORDS << 1);
-+ }
-+
-+ if (of_find_property(np, "ath,eep-swap", NULL))
-+ for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++)
-+ ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]);
-+
-+ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
-+ memcpy_fromio(athxk_eeprom_mac, (void*) ath5k_pdata.eeprom_data + mac_offset, 6);
-+ } else if (mac_res) {
-+ if (resource_size(mac_res) != 6) {
-+ dev_err(&pdev->dev, "mac has an invalid size\n");
-+ return -EINVAL;
-+ }
-+ mac = ioremap(mac_res->start, resource_size(mac_res));
-+ memcpy_fromio(athxk_eeprom_mac, mac, 6);
-+ } else if (ltq_get_eth_mac())
-+ memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
-+ else {
-+ dev_warn(&pdev->dev, "using random mac\n");
-+ random_ether_addr(athxk_eeprom_mac);
-+ }
-+
-+ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
-+ athxk_eeprom_mac[5] += mac_inc;
-+
-+ ath5k_pdata.macaddr = athxk_eeprom_mac;
-+ ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init;
-+
-+ dev_info(&pdev->dev, "loaded ath5k eeprom\n");
-+
-+ return 0;
-+}
-+
-+static struct of_device_id ath5k_eeprom_ids[] = {
-+ { .compatible = "ath5k,eeprom" },
-+ { }
-+};
-+
-+static struct platform_driver ath5k_eeprom_driver = {
-+ .driver = {
-+ .name = "ath5k,eeprom",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(ath5k_eeprom_ids),
-+ },
-+};
-+
-+static int __init of_ath5k_eeprom_init(void)
-+{
-+ return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
-+}
-+device_initcall(of_ath5k_eeprom_init);
-diff --git a/arch/mips/lantiq/xway/eth_mac.c b/arch/mips/lantiq/xway/eth_mac.c
-new file mode 100644
-index 0000000..d288a0e
---- /dev/null
-+++ b/arch/mips/lantiq/xway/eth_mac.c
-@@ -0,0 +1,76 @@
-+/*
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/if_ether.h>
-+
-+static u8 eth_mac[6];
-+static int eth_mac_set;
-+
-+const u8* ltq_get_eth_mac(void)
-+{
-+ return eth_mac;
-+}
-+
-+static int __init setup_ethaddr(char *str)
-+{
-+ eth_mac_set = mac_pton(str, eth_mac);
-+ return !eth_mac_set;
-+}
-+__setup("ethaddr=", setup_ethaddr);
-+
-+int __init of_eth_mac_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct resource *mac_res;
-+ void __iomem *mac;
-+ u32 mac_inc = 0;
-+
-+ if (eth_mac_set) {
-+ dev_err(&pdev->dev, "mac was already set by bootloader\n");
-+ return -EINVAL;
-+ }
-+ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ if (!mac_res) {
-+ dev_err(&pdev->dev, "failed to load mac\n");
-+ return -EINVAL;
-+ }
-+ if (resource_size(mac_res) != 6) {
-+ dev_err(&pdev->dev, "mac has an invalid size\n");
-+ return -EINVAL;
-+ }
-+ mac = ioremap(mac_res->start, resource_size(mac_res));
-+ memcpy_fromio(eth_mac, mac, 6);
-+
-+ if (!of_property_read_u32(np, "mac-increment", &mac_inc))
-+ eth_mac[5] += mac_inc;
-+
-+ return 0;
-+}
-+
-+static struct of_device_id eth_mac_ids[] = {
-+ { .compatible = "lantiq,eth-mac" },
-+ { /* sentinel */ }
-+};
-+
-+static struct platform_driver eth_mac_driver = {
-+ .driver = {
-+ .name = "lantiq,eth-mac",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(eth_mac_ids),
-+ },
-+};
-+
-+static int __init of_eth_mac_init(void)
-+{
-+ return platform_driver_probe(ð_mac_driver, of_eth_mac_probe);
-+}
-+device_initcall(of_eth_mac_init);
-diff --git a/arch/mips/lantiq/xway/pci-ath-fixup.c b/arch/mips/lantiq/xway/pci-ath-fixup.c
-new file mode 100644
-index 0000000..c87ffb2
---- /dev/null
-+++ b/arch/mips/lantiq/xway/pci-ath-fixup.c
-@@ -0,0 +1,109 @@
-+/*
-+ * Atheros AP94 reference board PCI initialization
-+ *
-+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <lantiq_soc.h>
-+
-+#define LTQ_PCI_MEM_BASE 0x18000000
-+
-+struct ath_fixup {
-+ u16 *cal_data;
-+ unsigned slot;
-+};
-+
-+static int ath_num_fixups;
-+static struct ath_fixup ath_fixups[2];
-+
-+static void ath_pci_fixup(struct pci_dev *dev)
-+{
-+ void __iomem *mem;
-+ u16 *cal_data = NULL;
-+ u16 cmd;
-+ u32 bar0;
-+ u32 val;
-+ unsigned i;
-+
-+ for (i = 0; i < ath_num_fixups; i++) {
-+ if (ath_fixups[i].cal_data == NULL)
-+ continue;
-+
-+ if (ath_fixups[i].slot != PCI_SLOT(dev->devfn))
-+ continue;
-+
-+ cal_data = ath_fixups[i].cal_data;
-+ break;
-+ }
-+
-+ if (cal_data == NULL)
-+ return;
-+
-+ if (*cal_data != 0xa55a) {
-+ pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-+ return;
-+ }
-+
-+ pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-+
-+ mem = ioremap(LTQ_PCI_MEM_BASE, 0x10000);
-+ if (!mem) {
-+ pr_err("pci %s: ioremap error\n", pci_name(dev));
-+ return;
-+ }
-+
-+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, LTQ_PCI_MEM_BASE);
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+ /* set pointer to first reg address */
-+ cal_data += 3;
-+ while (*cal_data != 0xffff) {
-+ u32 reg;
-+ reg = *cal_data++;
-+ val = *cal_data++;
-+ val |= (*cal_data++) << 16;
-+
-+ ltq_w32(swab32(val), mem + reg);
-+ udelay(100);
-+ }
-+
-+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-+ dev->vendor = val & 0xffff;
-+ dev->device = (val >> 16) & 0xffff;
-+
-+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-+ dev->revision = val & 0xff;
-+ dev->class = val >> 8; /* upper 3 bytes */
-+
-+ pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n",
-+ pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class);
-+
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-+
-+ iounmap(mem);
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup);
-+
-+void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data)
-+{
-+ if (ath_num_fixups >= ARRAY_SIZE(ath_fixups))
-+ return;
-+
-+ ath_fixups[ath_num_fixups].slot = slot;
-+ ath_fixups[ath_num_fixups].cal_data = cal_data;
-+ ath_num_fixups++;
-+}
-diff --git a/arch/mips/lantiq/xway/rt_eep.c b/arch/mips/lantiq/xway/rt_eep.c
-new file mode 100644
-index 0000000..00f2d4c
---- /dev/null
-+++ b/arch/mips/lantiq/xway/rt_eep.c
-@@ -0,0 +1,60 @@
-+/*
-+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/rt2x00_platform.h>
-+
-+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
-+static struct rt2x00_platform_data rt2x00_pdata;
-+
-+static int rt2x00_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+ dev->dev.platform_data = &rt2x00_pdata;
-+ return 0;
-+}
-+
-+int __init of_ralink_eeprom_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ const char *eeprom;
-+
-+ if (of_property_read_string(np, "ralink,eeprom", &eeprom)) {
-+ dev_err(&pdev->dev, "failed to load eeprom filename\n");
-+ return 0;
-+ }
-+
-+ rt2x00_pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
-+// rt2x00_pdata.mac_address = mac;
-+ ltq_pci_plat_dev_init = rt2x00_pci_plat_dev_init;
-+
-+ dev_info(&pdev->dev, "using %s as eeprom\n", eeprom);
-+
-+ return 0;
-+}
-+
-+static struct of_device_id ralink_eeprom_ids[] = {
-+ { .compatible = "ralink,eeprom" },
-+ { }
-+};
-+
-+static struct platform_driver ralink_eeprom_driver = {
-+ .driver = {
-+ .name = "ralink,eeprom",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(ralink_eeprom_ids),
-+ },
-+};
-+
-+static int __init of_ralink_eeprom_init(void)
-+{
-+ return platform_driver_probe(&ralink_eeprom_driver, of_ralink_eeprom_probe);
-+}
-+device_initcall(of_ralink_eeprom_init);
---
-1.7.10.4
-
--- /dev/null
+From 85f0df34dee96048515ef1e01d88524bd579f8e0 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 10 Sep 2014 22:39:19 +0200
+Subject: [PATCH 11/36] lantiq: add support for xrx200 firmware depending on
+ soc type
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+---
+ arch/mips/lantiq/xway/xrx200_phy_fw.c | 18 +++++++++++++++++-
+ 1 file changed, 17 insertions(+), 1 deletion(-)
+
+diff --git a/arch/mips/lantiq/xway/xrx200_phy_fw.c b/arch/mips/lantiq/xway/xrx200_phy_fw.c
+index d4d9d31..3479b77 100644
+--- a/arch/mips/lantiq/xway/xrx200_phy_fw.c
++++ b/arch/mips/lantiq/xway/xrx200_phy_fw.c
+@@ -24,7 +24,23 @@ static dma_addr_t xway_gphy_load(struct platform_device *pdev)
+ void *fw_addr;
+ size_t size;
+
+- if (of_property_read_string(pdev->dev.of_node, "firmware", &fw_name)) {
++ if (of_get_property(pdev->dev.of_node, "firmware1", NULL) || of_get_property(pdev->dev.of_node, "firmware2", NULL)) {
++ switch(ltq_soc_type()) {
++ case SOC_TYPE_VR9:
++ if (of_property_read_string(pdev->dev.of_node, "firmware1", &fw_name)) {
++ dev_err(&pdev->dev, "failed to load firmware filename\n");
++ return 0;
++ }
++ break;
++ case SOC_TYPE_VR9_2:
++ if (of_property_read_string(pdev->dev.of_node, "firmware2", &fw_name)) {
++ dev_err(&pdev->dev, "failed to load firmware filename\n");
++ return 0;
++ }
++ break;
++ }
++ }
++ else if (of_property_read_string(pdev->dev.of_node, "firmware", &fw_name)) {
+ dev_err(&pdev->dev, "failed to load firmware filename\n");
+ return 0;
+ }
+--
+1.7.10.4
+
+++ /dev/null
-From 572e107a37deb7bc8512ca9144f4e8f24b36e451 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:32:12 +0200
-Subject: [PATCH 11/31] owrt: generic dtb image hack
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/kernel/head.S | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
-index 7b6a5b3..78518b8 100644
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -101,6 +101,9 @@ FEXPORT(__kernel_entry)
- j kernel_entry
- #endif
-
-+ .ascii "OWRTDTB:"
-+ EXPORT(__image_dtb)
-+ .fill 0x4000
- __REF
-
- NESTED(kernel_entry, 16, sp) # kernel entry point
---
-1.7.10.4
-
+++ /dev/null
-From 6c476b89f3d685b41f2e216698fc8c90ddb11dfd Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:18:00 +0200
-Subject: [PATCH 12/31] MTD: lantiq: handle NO_XIP on cfi0001 flash
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/maps/lantiq-flash.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
-index 93c507a..710d699 100644
---- a/drivers/mtd/maps/lantiq-flash.c
-+++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -140,7 +140,11 @@ ltq_mtd_probe(struct platform_device *pdev)
- if (!ltq_mtd->map)
- return -ENOMEM;
-
-- ltq_mtd->map->phys = ltq_mtd->res->start;
-+ if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
-+ ltq_mtd->map->phys = NO_XIP;
-+ else
-+ ltq_mtd->map->phys = ltq_mtd->res->start;
-+ ltq_mtd->res->start;
- ltq_mtd->map->size = resource_size(ltq_mtd->res);
- ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
- if (IS_ERR(ltq_mtd->map->virt))
---
-1.7.10.4
-
--- /dev/null
+From 25494c55a4007a1409f53ddbafd661636e47ea34 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 9 Aug 2013 20:38:15 +0200
+Subject: [PATCH 12/36] pinctrl/lantiq: fix up pinmux
+
+We found out how to set the gphy led pinmuxing.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++++++++++++++--
+ 1 file changed, 26 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
+index e66f4ca..b5f43c8 100644
+--- a/drivers/pinctrl/pinctrl-xway.c
++++ b/drivers/pinctrl/pinctrl-xway.c
+@@ -609,10 +609,9 @@ static struct pinctrl_desc xway_pctrl_desc = {
+ .confops = &xway_pinconf_ops,
+ };
+
+-static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
++static int mux_apply(struct ltq_pinmux_info *info,
+ int pin, int mux)
+ {
+- struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+ int port = PORT(pin);
+ u32 alt1_reg = GPIO_ALT1(pin);
+
+@@ -632,6 +631,14 @@ static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
+ return 0;
+ }
+
++static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
++ int pin, int mux)
++{
++ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
++
++ return mux_apply(info, pin, mux);
++}
++
+ static const struct ltq_cfg_param xway_cfg_params[] = {
+ {"lantiq,pull", LTQ_PINCONF_PARAM_PULL},
+ {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN},
+@@ -676,6 +683,10 @@ static int xway_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, int val)
+ {
+ struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
+
++ if (PORT(pin) == PORT3)
++ gpio_setbit(info->membase[0], GPIO3_OD, PORT_PIN(pin));
++ else
++ gpio_setbit(info->membase[0], GPIO_OD(pin), PORT_PIN(pin));
+ gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin));
+ xway_gpio_set(chip, pin, val);
+
+@@ -696,6 +707,18 @@ static void xway_gpio_free(struct gpio_chip *chip, unsigned offset)
+ pinctrl_free_gpio(gpio);
+ }
+
++static int xway_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
++{
++ struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
++ int i;
++
++ for (i = 0; i < info->num_exin; i++)
++ if (info->exin[i] == offset)
++ return ltq_eiu_get_irq(i);
++
++ return -1;
++}
++
+ static struct gpio_chip xway_chip = {
+ .label = "gpio-xway",
+ .direction_input = xway_gpio_dir_in,
+@@ -704,6 +727,7 @@ static struct gpio_chip xway_chip = {
+ .set = xway_gpio_set,
+ .request = xway_gpio_req,
+ .free = xway_gpio_free,
++ .to_irq = xway_gpio_to_irq,
+ .base = -1,
+ };
+
+--
+1.7.10.4
+
-From c243da18ea2a02e8cfb3f821232783376131948a Mon Sep 17 00:00:00 2001
+From 8e34da603f442624bb70e887d8f42064bb924224 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 18:03:54 +0200
-Subject: [PATCH 13/31] MTD: lantiq: xway: fix invalid operator
+Subject: [PATCH 13/36] MTD: lantiq: xway: fix invalid operator
xway_read_byte should use a logic or and not an add operator when working out
the nand address.
-From b2ef79004dd8e26f3a4625610bff5362b70e956b Mon Sep 17 00:00:00 2001
+From b454cefd675fc1bd3d8c690c1bd1d8f4678e9922 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 18:06:39 +0200
-Subject: [PATCH 14/31] MTD: lantiq: xway: the latched command should be
+Subject: [PATCH 14/36] MTD: lantiq: xway: the latched command should be
persistent
Signed-off-by: John Crispin <blogic@openwrt.org>
-From 836c433cec22555d81bf02bb205dee5772b8df08 Mon Sep 17 00:00:00 2001
+From 76e153079f02d26e3357302d2886a0c8aaaec64d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 18:02:06 +0200
-Subject: [PATCH 15/31] MTD: lantiq: xway: remove endless loop
+Subject: [PATCH 15/36] MTD: lantiq: xway: remove endless loop
The reset loop logic could run into a endless loop. Lets fix it as requested.
-From 6f5bf300afa3c6f41a973fb3f39827db59512343 Mon Sep 17 00:00:00 2001
+From 65df9d63eaee02c25e879b33dd42aceb78e57842 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 17:59:51 +0200
-Subject: [PATCH 16/31] MTD: lantiq: xway: add missing write_buf and read_buf
+Subject: [PATCH 16/36] MTD: lantiq: xway: add missing write_buf and read_buf
to nand driver
Signed-off-by: John Crispin <blogic@openwrt.org>
-From bbaf5aaf4b430f2139e5f561b6372008d26766a2 Mon Sep 17 00:00:00 2001
+From aa705c1b0860da91f2ed1a4c0b57337e6de689e1 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:55:31 +0200
-Subject: [PATCH 17/31] MTD: xway: fix nand locking
+Subject: [PATCH 17/36] MTD: xway: fix nand locking
Signed-off-by: John Crispin <blogic@openwrt.org>
---
+++ /dev/null
-From e2c285e95e75258c196fbc04a742d91be6d00f49 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 30 Jan 2013 21:12:47 +0100
-Subject: [PATCH 18/31] MTD: lantiq: Add NAND support on Lantiq Falcon SoC.
-
-The driver uses plat_nand. As the platform_device is loaded from DT, we need
-to lookup the node and attach our falcon specific "struct platform_nand_data"
-to it.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/Kconfig | 8 ++++
- drivers/mtd/nand/Makefile | 1 +
- drivers/mtd/nand/falcon_nand.c | 83 ++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 92 insertions(+)
- create mode 100644 drivers/mtd/nand/falcon_nand.c
-
-diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
-index 90ff447..7064f0e 100644
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -510,4 +510,12 @@ config MTD_NAND_XWAY
- Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
- to the External Bus Unit (EBU).
-
-+config MTD_NAND_FALCON
-+ tristate "Support for NAND on Lantiq FALC-ON SoC"
-+ depends on LANTIQ && SOC_FALCON
-+ select MTD_NAND_PLATFORM
-+ help
-+ Enables support for NAND Flash chips on Lantiq FALC-ON SoCs. NAND is
-+ attached to the External Bus Unit (EBU).
-+
- endif # MTD_NAND
-diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
-index 542b568..78a1cd2 100644
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
- obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
- obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
- obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
-+obj-$(CONFIG_MTD_NAND_FALCON) += falcon_nand.o
-
- nand-objs := nand_base.o nand_bbt.o
-diff --git a/drivers/mtd/nand/falcon_nand.c b/drivers/mtd/nand/falcon_nand.c
-new file mode 100644
-index 0000000..13458d3
---- /dev/null
-+++ b/drivers/mtd/nand/falcon_nand.c
-@@ -0,0 +1,83 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
-+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/mtd/nand.h>
-+#include <linux/of_platform.h>
-+
-+#include <lantiq_soc.h>
-+
-+/* address lines used for NAND control signals */
-+#define NAND_ADDR_ALE 0x10000
-+#define NAND_ADDR_CLE 0x20000
-+
-+/* Ready/Busy Status */
-+#define MODCON_STS 0x0002
-+
-+/* Ready/Busy Status Edge */
-+#define MODCON_STSEDGE 0x0004
-+#define LTQ_EBU_MODCON 0x000C
-+
-+static const char const *part_probes[] = { "cmdlinepart", "ofpart", NULL };
-+
-+static int falcon_nand_ready(struct mtd_info *mtd)
-+{
-+ u32 modcon = ltq_ebu_r32(LTQ_EBU_MODCON);
-+
-+ return (((modcon & (MODCON_STS | MODCON_STSEDGE)) ==
-+ (MODCON_STS | MODCON_STSEDGE)));
-+}
-+
-+static void falcon_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-+
-+ if (ctrl & NAND_CTRL_CHANGE) {
-+ nandaddr &= ~(NAND_ADDR_ALE | NAND_ADDR_CLE);
-+
-+ if (ctrl & NAND_CLE)
-+ nandaddr |= NAND_ADDR_CLE;
-+ if (ctrl & NAND_ALE)
-+ nandaddr |= NAND_ADDR_ALE;
-+
-+ this->IO_ADDR_W = (void __iomem *) nandaddr;
-+ }
-+
-+ if (cmd != NAND_CMD_NONE)
-+ writeb(cmd, this->IO_ADDR_W);
-+}
-+
-+static struct platform_nand_data falcon_nand_data = {
-+ .chip = {
-+ .nr_chips = 1,
-+ .chip_delay = 25,
-+ .part_probe_types = part_probes,
-+ },
-+ .ctrl = {
-+ .cmd_ctrl = falcon_hwcontrol,
-+ .dev_ready = falcon_nand_ready,
-+ }
-+};
-+
-+int __init falcon_register_nand(void)
-+{
-+ struct device_node *node;
-+ struct platform_device *pdev;
-+
-+ node = of_find_compatible_node(NULL, NULL, "lantiq,nand-falcon");
-+ if (!node)
-+ return -1;
-+ pdev = of_find_device_by_node(node);
-+ if (pdev)
-+ pdev->dev.platform_data = &falcon_nand_data;
-+ of_node_put(node);
-+ return 0;
-+}
-+
-+arch_initcall(falcon_register_nand);
---
-1.7.10.4
-
--- /dev/null
+From 997a8965db8417266bea3fbdcfa3e5655a1b52fa Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 9 Sep 2014 23:12:15 +0200
+Subject: [PATCH 18/36] MTD: nand: lots of xrx200 fixes
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/nand/xway_nand.c | 63 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 63 insertions(+)
+
+diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
+index e430f2d..fedf2c4 100644
+--- a/drivers/mtd/nand/xway_nand.c
++++ b/drivers/mtd/nand/xway_nand.c
+@@ -54,8 +54,27 @@
+ #define NAND_CON_CSMUX (1 << 1)
+ #define NAND_CON_NANDM 1
+
++#define DANUBE_PCI_REG32( addr ) (*(volatile u32 *)(addr))
++#define PCI_CR_PR_OFFSET (KSEG1+0x1E105400)
++#define PCI_CR_PC_ARB (PCI_CR_PR_OFFSET + 0x0080)
++
+ static u32 xway_latchcmd;
+
++/*
++ * req_mask provides a mechanism to prevent interference between
++ * nand and pci (probably only relevant for the BT Home Hub 2B).
++ * Setting it causes the corresponding pci req pins to be masked
++ * during nand access, and also moves ebu locking from the read/write
++ * functions to the chip select function to ensure that the whole
++ * operation runs with interrupts disabled.
++ * In addition it switches on some extra waiting in xway_cmd_ctrl().
++ * This seems to be necessary if the ebu_cs1 pin has open-drain disabled,
++ * which in turn seems to be necessary for the nor chip to be recognised
++ * reliably, on a board (Home Hub 2B again) which has both nor and nand.
++ */
++
++static __be32 req_mask = 0;
++
+ static void xway_reset_chip(struct nand_chip *chip)
+ {
+ unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
+@@ -86,12 +105,24 @@ static void xway_select_chip(struct mtd_info *mtd, int chip)
+ case -1:
+ ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
+ ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
++
++ if (req_mask) {
++ /* Unmask all external PCI request */
++ DANUBE_PCI_REG32(PCI_CR_PC_ARB) &= ~(req_mask << 16);
++ }
+ spin_unlock_irqrestore(&ebu_lock, csflags);
++
+ break;
+ case 0:
+ spin_lock_irqsave(&ebu_lock, csflags);
++ if (req_mask) {
++ /* Mask all external PCI request */
++ DANUBE_PCI_REG32(PCI_CR_PC_ARB) |= (req_mask << 16);
++ }
++
+ ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
+ ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
++
+ break;
+ default:
+ BUG();
+@@ -103,6 +134,12 @@ static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+ struct nand_chip *this = mtd->priv;
+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+
++ if (req_mask) {
++ if (cmd != NAND_CMD_STATUS)
++ ltq_ebu_w32(EBU_NAND_WAIT, 0); /* Clear nand ready */
++ }
++
++
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_CLE)
+ xway_latchcmd = NAND_WRITE_CMD;
+@@ -115,6 +152,24 @@ static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+ while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+ ;
+ }
++
++ if (req_mask) {
++ /*
++ * program and erase have their own busy handlers
++ * status and sequential in needs no delay
++ */
++ switch (cmd) {
++ case NAND_CMD_ERASE1:
++ case NAND_CMD_SEQIN:
++ case NAND_CMD_STATUS:
++ case NAND_CMD_READID:
++ return;
++ }
++
++ /* wait until command is processed */
++ while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD) == 0)
++ ;
++ }
+ }
+
+ static int xway_dev_ready(struct mtd_info *mtd)
+@@ -157,6 +212,8 @@ static int xway_nand_probe(struct platform_device *pdev)
+ {
+ struct nand_chip *this = platform_get_drvdata(pdev);
+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
++ const __be32 *req_mask_ptr = of_get_property(pdev->dev.of_node,
++ "req-mask", NULL);
+ const __be32 *cs = of_get_property(pdev->dev.of_node,
+ "lantiq,cs", NULL);
+ u32 cs_flag = 0;
+@@ -165,6 +222,12 @@ static int xway_nand_probe(struct platform_device *pdev)
+ if (cs && (*cs == 1))
+ cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
+
++ /*
++ * Load the PCI req lines to mask from the device tree. If the
++ * property is not present, setting req_mask to 0 disables masking.
++ */
++ req_mask = (req_mask_ptr ? *req_mask_ptr : 0);
++
+ /* setup the EBU to run in NAND mode on our base addr */
+ ltq_ebu_w32(CPHYSADDR(nandaddr)
+ | ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);
+--
+1.7.10.4
+
--- /dev/null
+From c21eed4418956ecc95966a2e174d47f58397071a Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 30 Jan 2013 21:12:47 +0100
+Subject: [PATCH 19/36] MTD: lantiq: Add NAND support on Lantiq Falcon SoC.
+
+The driver uses plat_nand. As the platform_device is loaded from DT, we need
+to lookup the node and attach our falcon specific "struct platform_nand_data"
+to it.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/nand/Kconfig | 8 ++++
+ drivers/mtd/nand/Makefile | 1 +
+ drivers/mtd/nand/falcon_nand.c | 83 ++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 92 insertions(+)
+ create mode 100644 drivers/mtd/nand/falcon_nand.c
+
+diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
+index 90ff447..7064f0e 100644
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -510,4 +510,12 @@ config MTD_NAND_XWAY
+ Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
+ to the External Bus Unit (EBU).
+
++config MTD_NAND_FALCON
++ tristate "Support for NAND on Lantiq FALC-ON SoC"
++ depends on LANTIQ && SOC_FALCON
++ select MTD_NAND_PLATFORM
++ help
++ Enables support for NAND Flash chips on Lantiq FALC-ON SoCs. NAND is
++ attached to the External Bus Unit (EBU).
++
+ endif # MTD_NAND
+diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
+index 542b568..78a1cd2 100644
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+ obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
+ obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
+ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
++obj-$(CONFIG_MTD_NAND_FALCON) += falcon_nand.o
+
+ nand-objs := nand_base.o nand_bbt.o
+diff --git a/drivers/mtd/nand/falcon_nand.c b/drivers/mtd/nand/falcon_nand.c
+new file mode 100644
+index 0000000..13458d3
+--- /dev/null
++++ b/drivers/mtd/nand/falcon_nand.c
+@@ -0,0 +1,83 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
++ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/mtd/nand.h>
++#include <linux/of_platform.h>
++
++#include <lantiq_soc.h>
++
++/* address lines used for NAND control signals */
++#define NAND_ADDR_ALE 0x10000
++#define NAND_ADDR_CLE 0x20000
++
++/* Ready/Busy Status */
++#define MODCON_STS 0x0002
++
++/* Ready/Busy Status Edge */
++#define MODCON_STSEDGE 0x0004
++#define LTQ_EBU_MODCON 0x000C
++
++static const char const *part_probes[] = { "cmdlinepart", "ofpart", NULL };
++
++static int falcon_nand_ready(struct mtd_info *mtd)
++{
++ u32 modcon = ltq_ebu_r32(LTQ_EBU_MODCON);
++
++ return (((modcon & (MODCON_STS | MODCON_STSEDGE)) ==
++ (MODCON_STS | MODCON_STSEDGE)));
++}
++
++static void falcon_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
++{
++ struct nand_chip *this = mtd->priv;
++ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
++
++ if (ctrl & NAND_CTRL_CHANGE) {
++ nandaddr &= ~(NAND_ADDR_ALE | NAND_ADDR_CLE);
++
++ if (ctrl & NAND_CLE)
++ nandaddr |= NAND_ADDR_CLE;
++ if (ctrl & NAND_ALE)
++ nandaddr |= NAND_ADDR_ALE;
++
++ this->IO_ADDR_W = (void __iomem *) nandaddr;
++ }
++
++ if (cmd != NAND_CMD_NONE)
++ writeb(cmd, this->IO_ADDR_W);
++}
++
++static struct platform_nand_data falcon_nand_data = {
++ .chip = {
++ .nr_chips = 1,
++ .chip_delay = 25,
++ .part_probe_types = part_probes,
++ },
++ .ctrl = {
++ .cmd_ctrl = falcon_hwcontrol,
++ .dev_ready = falcon_nand_ready,
++ }
++};
++
++int __init falcon_register_nand(void)
++{
++ struct device_node *node;
++ struct platform_device *pdev;
++
++ node = of_find_compatible_node(NULL, NULL, "lantiq,nand-falcon");
++ if (!node)
++ return -1;
++ pdev = of_find_device_by_node(node);
++ if (pdev)
++ pdev->dev.platform_data = &falcon_nand_data;
++ of_node_put(node);
++ return 0;
++}
++
++arch_initcall(falcon_register_nand);
+--
+1.7.10.4
+
+++ /dev/null
-From 4e2a4dcadb70985e86d9cebfca308891be377510 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:57:30 +0200
-Subject: [PATCH 19/31] MTD: lantiq: Makes the Lantiq flash driver try jedec
- probing if cfi probing fails.
-
-(Based on work by Simon Hayes first published on www.psidoc.com and
-http://sourceforge.net/projects/hh2b4ever/)
-
-Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/maps/lantiq-flash.c | 10 +++++++++-
- 1 file changed, 9 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
-index 710d699..dd1e853 100644
---- a/drivers/mtd/maps/lantiq-flash.c
-+++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -117,6 +117,11 @@ ltq_mtd_probe(struct platform_device *pdev)
- struct cfi_private *cfi;
- int err;
-
-+ static const char *rom_probe_types[] = {
-+ "cfi_probe", "jedec_probe", NULL
-+ };
-+ const char **type;
-+
- if (of_machine_is_compatible("lantiq,falcon") &&
- (ltq_boot_select() != BS_FLASH)) {
- dev_err(&pdev->dev, "invalid bootstrap options\n");
-@@ -158,7 +163,10 @@ ltq_mtd_probe(struct platform_device *pdev)
- ltq_mtd->map->copy_to = ltq_copy_to;
-
- ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING;
-- ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map);
-+
-+ for (type = rom_probe_types; !ltq_mtd->mtd && *type; type++)
-+ ltq_mtd->mtd = do_map_probe(*type, ltq_mtd->map);
-+
- ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL;
-
- if (!ltq_mtd->mtd) {
---
-1.7.10.4
-
--- /dev/null
+From e3b20f04e9f9cae1babe091fdc1d08d7703ae344 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 7 Aug 2014 18:18:00 +0200
+Subject: [PATCH 20/36] MTD: lantiq: handle NO_XIP on cfi0001 flash
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/maps/lantiq-flash.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
+index 93c507a..710d699 100644
+--- a/drivers/mtd/maps/lantiq-flash.c
++++ b/drivers/mtd/maps/lantiq-flash.c
+@@ -140,7 +140,11 @@ ltq_mtd_probe(struct platform_device *pdev)
+ if (!ltq_mtd->map)
+ return -ENOMEM;
+
+- ltq_mtd->map->phys = ltq_mtd->res->start;
++ if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
++ ltq_mtd->map->phys = NO_XIP;
++ else
++ ltq_mtd->map->phys = ltq_mtd->res->start;
++ ltq_mtd->res->start;
+ ltq_mtd->map->size = resource_size(ltq_mtd->res);
+ ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
+ if (IS_ERR(ltq_mtd->map->virt))
+--
+1.7.10.4
+
+++ /dev/null
-From 6c895c9b0ceff79fdeb73876e35b536a312f851b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:15:36 +0200
-Subject: [PATCH 20/31] NET: PHY: adds driver for lantiq PHY11G
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/phy/Kconfig | 5 +
- drivers/net/phy/Makefile | 1 +
- drivers/net/phy/lantiq.c | 231 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 237 insertions(+)
- create mode 100644 drivers/net/phy/lantiq.c
-
-diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
-index 9b5d46c..f3724b1 100644
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -106,6 +106,11 @@ config MICREL_PHY
- ---help---
- Supports the KSZ9021, VSC8201, KS8001 PHYs.
-
-+config LANTIQ_PHY
-+ tristate "Driver for Lantiq PHYs"
-+ ---help---
-+ Supports the 11G and 22E PHYs.
-+
- config FIXED_PHY
- bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- depends on PHYLIB=y
-diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
-index 9013dfa..b5e030f 100644
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -23,6 +23,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o
- obj-$(CONFIG_DP83640_PHY) += dp83640.o
- obj-$(CONFIG_STE10XP) += ste10Xp.o
- obj-$(CONFIG_MICREL_PHY) += micrel.o
-+obj-$(CONFIG_LANTIQ_PHY) += lantiq.o
- obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
- obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
- obj-$(CONFIG_AT803X_PHY) += at803x.o
-diff --git a/drivers/net/phy/lantiq.c b/drivers/net/phy/lantiq.c
-new file mode 100644
-index 0000000..f109bb9
---- /dev/null
-+++ b/drivers/net/phy/lantiq.c
-@@ -0,0 +1,231 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/phy.h>
-+
-+#define MII_MMDCTRL 0x0d
-+#define MII_MMDDATA 0x0e
-+
-+#define MII_VR9_11G_IMASK 0x19 /* interrupt mask */
-+#define MII_VR9_11G_ISTAT 0x1a /* interrupt status */
-+
-+#define INT_VR9_11G_WOL BIT(15) /* Wake-On-LAN */
-+#define INT_VR9_11G_ANE BIT(11) /* Auto-Neg error */
-+#define INT_VR9_11G_ANC BIT(10) /* Auto-Neg complete */
-+#define INT_VR9_11G_ADSC BIT(5) /* Link auto-downspeed detect */
-+#define INT_VR9_11G_DXMC BIT(2) /* Duplex mode change */
-+#define INT_VR9_11G_LSPC BIT(1) /* Link speed change */
-+#define INT_VR9_11G_LSTC BIT(0) /* Link state change */
-+#define INT_VR9_11G_MASK (INT_VR9_11G_LSTC | INT_VR9_11G_ADSC)
-+
-+#define ADVERTISED_MPD BIT(10) /* Multi-port device */
-+
-+#define MMD_DEVAD 0x1f
-+#define MMD_ACTYPE_SHIFT 14
-+#define MMD_ACTYPE_ADDRESS (0 << MMD_ACTYPE_SHIFT)
-+#define MMD_ACTYPE_DATA (1 << MMD_ACTYPE_SHIFT)
-+#define MMD_ACTYPE_DATA_PI (2 << MMD_ACTYPE_SHIFT)
-+#define MMD_ACTYPE_DATA_PIWR (3 << MMD_ACTYPE_SHIFT)
-+
-+static __maybe_unused int vr9_gphy_mmd_read(struct phy_device *phydev,
-+ u16 regnum)
-+{
-+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
-+ phy_write(phydev, MII_MMDDATA, regnum);
-+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
-+
-+ return phy_read(phydev, MII_MMDDATA);
-+}
-+
-+static __maybe_unused int vr9_gphy_mmd_write(struct phy_device *phydev,
-+ u16 regnum, u16 val)
-+{
-+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
-+ phy_write(phydev, MII_MMDDATA, regnum);
-+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
-+ phy_write(phydev, MII_MMDDATA, val);
-+
-+ return 0;
-+}
-+
-+static int vr9_gphy_config_init(struct phy_device *phydev)
-+{
-+ int err;
-+
-+ dev_dbg(&phydev->dev, "%s\n", __func__);
-+
-+ /* Mask all interrupts */
-+ err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
-+ if (err)
-+ return err;
-+
-+ /* Clear all pending interrupts */
-+ phy_read(phydev, MII_VR9_11G_ISTAT);
-+
-+ vr9_gphy_mmd_write(phydev, 0x1e0, 0xc5);
-+ vr9_gphy_mmd_write(phydev, 0x1e1, 0x67);
-+ vr9_gphy_mmd_write(phydev, 0x1e2, 0x42);
-+ vr9_gphy_mmd_write(phydev, 0x1e3, 0x10);
-+ vr9_gphy_mmd_write(phydev, 0x1e4, 0x70);
-+ vr9_gphy_mmd_write(phydev, 0x1e5, 0x03);
-+ vr9_gphy_mmd_write(phydev, 0x1e6, 0x20);
-+ vr9_gphy_mmd_write(phydev, 0x1e7, 0x00);
-+ vr9_gphy_mmd_write(phydev, 0x1e8, 0x40);
-+ vr9_gphy_mmd_write(phydev, 0x1e9, 0x20);
-+
-+ return 0;
-+}
-+
-+static int vr9_gphy_config_aneg(struct phy_device *phydev)
-+{
-+ int reg, err;
-+
-+ /* Advertise as multi-port device */
-+ reg = phy_read(phydev, MII_CTRL1000);
-+ reg |= ADVERTISED_MPD;
-+ err = phy_write(phydev, MII_CTRL1000, reg);
-+ if (err)
-+ return err;
-+
-+ return genphy_config_aneg(phydev);
-+}
-+
-+static int vr9_gphy_ack_interrupt(struct phy_device *phydev)
-+{
-+ int reg;
-+
-+ /*
-+ * Possible IRQ numbers:
-+ * - IM3_IRL18 for GPHY0
-+ * - IM3_IRL17 for GPHY1
-+ *
-+ * Due to a silicon bug IRQ lines are not really independent from
-+ * each other. Sometimes the two lines are driven at the same time
-+ * if only one GPHY core raises the interrupt.
-+ */
-+
-+ reg = phy_read(phydev, MII_VR9_11G_ISTAT);
-+
-+ return (reg < 0) ? reg : 0;
-+}
-+
-+static int vr9_gphy_did_interrupt(struct phy_device *phydev)
-+{
-+ int reg;
-+
-+ reg = phy_read(phydev, MII_VR9_11G_ISTAT);
-+
-+ return reg > 0;
-+}
-+
-+static int vr9_gphy_config_intr(struct phy_device *phydev)
-+{
-+ int err;
-+
-+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
-+ err = phy_write(phydev, MII_VR9_11G_IMASK, INT_VR9_11G_MASK);
-+ else
-+ err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
-+
-+ return err;
-+}
-+
-+static struct phy_driver lantiq_phy[] = {
-+ {
-+ .phy_id = 0xd565a400,
-+ .phy_id_mask = 0xffffffff,
-+ .name = "Lantiq XWAY PEF7071",
-+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
-+ .flags = 0, /*PHY_HAS_INTERRUPT,*/
-+ .config_init = vr9_gphy_config_init,
-+ .config_aneg = vr9_gphy_config_aneg,
-+ .read_status = genphy_read_status,
-+ .ack_interrupt = vr9_gphy_ack_interrupt,
-+ .did_interrupt = vr9_gphy_did_interrupt,
-+ .config_intr = vr9_gphy_config_intr,
-+ .driver = { .owner = THIS_MODULE },
-+ }, {
-+ .phy_id = 0x030260D0,
-+ .phy_id_mask = 0xfffffff0,
-+ .name = "Lantiq XWAY VR9 GPHY 11G v1.3",
-+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
-+ .flags = 0, /*PHY_HAS_INTERRUPT,*/
-+ .config_init = vr9_gphy_config_init,
-+ .config_aneg = vr9_gphy_config_aneg,
-+ .read_status = genphy_read_status,
-+ .ack_interrupt = vr9_gphy_ack_interrupt,
-+ .did_interrupt = vr9_gphy_did_interrupt,
-+ .config_intr = vr9_gphy_config_intr,
-+ .driver = { .owner = THIS_MODULE },
-+ }, {
-+ .phy_id = 0xd565a408,
-+ .phy_id_mask = 0xfffffff8,
-+ .name = "Lantiq XWAY VR9 GPHY 11G v1.4",
-+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
-+ .flags = 0, /*PHY_HAS_INTERRUPT,*/
-+ .config_init = vr9_gphy_config_init,
-+ .config_aneg = vr9_gphy_config_aneg,
-+ .read_status = genphy_read_status,
-+ .ack_interrupt = vr9_gphy_ack_interrupt,
-+ .did_interrupt = vr9_gphy_did_interrupt,
-+ .config_intr = vr9_gphy_config_intr,
-+ .driver = { .owner = THIS_MODULE },
-+ }, {
-+ .phy_id = 0xd565a418,
-+ .phy_id_mask = 0xfffffff8,
-+ .name = "Lantiq XWAY XRX PHY22F v1.4",
-+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
-+ .flags = 0, /*PHY_HAS_INTERRUPT,*/
-+ .config_init = vr9_gphy_config_init,
-+ .config_aneg = vr9_gphy_config_aneg,
-+ .read_status = genphy_read_status,
-+ .ack_interrupt = vr9_gphy_ack_interrupt,
-+ .did_interrupt = vr9_gphy_did_interrupt,
-+ .config_intr = vr9_gphy_config_intr,
-+ .driver = { .owner = THIS_MODULE },
-+ },
-+};
-+
-+static int __init ltq_phy_init(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) {
-+ int err = phy_driver_register(&lantiq_phy[i]);
-+ if (err)
-+ pr_err("lantiq_phy: failed to load %s\n", lantiq_phy[i].name);
-+ }
-+
-+ return 0;
-+}
-+
-+static void __exit ltq_phy_exit(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++)
-+ phy_driver_unregister(&lantiq_phy[i]);
-+}
-+
-+module_init(ltq_phy_init);
-+module_exit(ltq_phy_exit);
-+
-+MODULE_DESCRIPTION("Lantiq PHY drivers");
-+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
-+MODULE_LICENSE("GPL");
---
-1.7.10.4
-
--- /dev/null
+From 11180582ca6efdff86314ae4514e9df3d34a6475 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 7 Aug 2014 18:57:30 +0200
+Subject: [PATCH 21/36] MTD: lantiq: Makes the Lantiq flash driver try jedec
+ probing if cfi probing fails.
+
+(Based on work by Simon Hayes first published on www.psidoc.com and
+http://sourceforge.net/projects/hh2b4ever/)
+
+Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/maps/lantiq-flash.c | 10 +++++++++-
+ 1 file changed, 9 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
+index 710d699..dd1e853 100644
+--- a/drivers/mtd/maps/lantiq-flash.c
++++ b/drivers/mtd/maps/lantiq-flash.c
+@@ -117,6 +117,11 @@ ltq_mtd_probe(struct platform_device *pdev)
+ struct cfi_private *cfi;
+ int err;
+
++ static const char *rom_probe_types[] = {
++ "cfi_probe", "jedec_probe", NULL
++ };
++ const char **type;
++
+ if (of_machine_is_compatible("lantiq,falcon") &&
+ (ltq_boot_select() != BS_FLASH)) {
+ dev_err(&pdev->dev, "invalid bootstrap options\n");
+@@ -158,7 +163,10 @@ ltq_mtd_probe(struct platform_device *pdev)
+ ltq_mtd->map->copy_to = ltq_copy_to;
+
+ ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING;
+- ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map);
++
++ for (type = rom_probe_types; !ltq_mtd->mtd && *type; type++)
++ ltq_mtd->mtd = do_map_probe(*type, ltq_mtd->map);
++
+ ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL;
+
+ if (!ltq_mtd->mtd) {
+--
+1.7.10.4
+
+++ /dev/null
-From c64015eb950202f84829498a9c9daf949eded81f Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Oct 2012 09:26:24 +0200
-Subject: [PATCH 21/31] NET: lantiq: adds PHY11G firmware blobs
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- firmware/Makefile | 4 +
- firmware/lantiq/COPYING | 286 +++++++++++++++++++++++++++++++++++++++++++++++
- firmware/lantiq/README | 45 ++++++++
- 3 files changed, 335 insertions(+)
- create mode 100644 firmware/lantiq/COPYING
- create mode 100644 firmware/lantiq/README
-
-diff --git a/firmware/Makefile b/firmware/Makefile
-index cbb09ce..171ebab 100644
---- a/firmware/Makefile
-+++ b/firmware/Makefile
-@@ -134,6 +134,10 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
- fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
- fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
- fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a1x.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a2x.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a1x.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a2x.bin
- fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
-
- fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
-diff --git a/firmware/lantiq/COPYING b/firmware/lantiq/COPYING
-new file mode 100644
-index 0000000..5ec70b2
---- /dev/null
-+++ b/firmware/lantiq/COPYING
-@@ -0,0 +1,286 @@
-+All firmware files are copyrighted by Lantiq Deutschland GmbH.
-+The files have been extracted from header files found in Lantiq BSPs.
-+If not stated otherwise all files are licensed under GPL.
-+
-+=======================================================================
-+
-+ GNU GENERAL PUBLIC LICENSE
-+ Version 2, June 1991
-+
-+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ Everyone is permitted to copy and distribute verbatim copies
-+ of this license document, but changing it is not allowed.
-+
-+ Preamble
-+
-+ The licenses for most software are designed to take away your
-+freedom to share and change it. By contrast, the GNU General Public
-+License is intended to guarantee your freedom to share and change free
-+software--to make sure the software is free for all its users. This
-+General Public License applies to most of the Free Software
-+Foundation's software and to any other program whose authors commit to
-+using it. (Some other Free Software Foundation software is covered by
-+the GNU Library General Public License instead.) You can apply it to
-+your programs, too.
-+
-+ When we speak of free software, we are referring to freedom, not
-+price. Our General Public Licenses are designed to make sure that you
-+have the freedom to distribute copies of free software (and charge for
-+this service if you wish), that you receive source code or can get it
-+if you want it, that you can change the software or use pieces of it
-+in new free programs; and that you know you can do these things.
-+
-+ To protect your rights, we need to make restrictions that forbid
-+anyone to deny you these rights or to ask you to surrender the rights.
-+These restrictions translate to certain responsibilities for you if you
-+distribute copies of the software, or if you modify it.
-+
-+ For example, if you distribute copies of such a program, whether
-+gratis or for a fee, you must give the recipients all the rights that
-+you have. You must make sure that they, too, receive or can get the
-+source code. And you must show them these terms so they know their
-+rights.
-+
-+ We protect your rights with two steps: (1) copyright the software, and
-+(2) offer you this license which gives you legal permission to copy,
-+distribute and/or modify the software.
-+
-+ Also, for each author's protection and ours, we want to make certain
-+that everyone understands that there is no warranty for this free
-+software. If the software is modified by someone else and passed on, we
-+want its recipients to know that what they have is not the original, so
-+that any problems introduced by others will not reflect on the original
-+authors' reputations.
-+
-+ Finally, any free program is threatened constantly by software
-+patents. We wish to avoid the danger that redistributors of a free
-+program will individually obtain patent licenses, in effect making the
-+program proprietary. To prevent this, we have made it clear that any
-+patent must be licensed for everyone's free use or not licensed at all.
-+
-+ The precise terms and conditions for copying, distribution and
-+modification follow.
-+\f
-+ GNU GENERAL PUBLIC LICENSE
-+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-+
-+ 0. This License applies to any program or other work which contains
-+a notice placed by the copyright holder saying it may be distributed
-+under the terms of this General Public License. The "Program", below,
-+refers to any such program or work, and a "work based on the Program"
-+means either the Program or any derivative work under copyright law:
-+that is to say, a work containing the Program or a portion of it,
-+either verbatim or with modifications and/or translated into another
-+language. (Hereinafter, translation is included without limitation in
-+the term "modification".) Each licensee is addressed as "you".
-+
-+Activities other than copying, distribution and modification are not
-+covered by this License; they are outside its scope. The act of
-+running the Program is not restricted, and the output from the Program
-+is covered only if its contents constitute a work based on the
-+Program (independent of having been made by running the Program).
-+Whether that is true depends on what the Program does.
-+
-+ 1. You may copy and distribute verbatim copies of the Program's
-+source code as you receive it, in any medium, provided that you
-+conspicuously and appropriately publish on each copy an appropriate
-+copyright notice and disclaimer of warranty; keep intact all the
-+notices that refer to this License and to the absence of any warranty;
-+and give any other recipients of the Program a copy of this License
-+along with the Program.
-+
-+You may charge a fee for the physical act of transferring a copy, and
-+you may at your option offer warranty protection in exchange for a fee.
-+
-+ 2. You may modify your copy or copies of the Program or any portion
-+of it, thus forming a work based on the Program, and copy and
-+distribute such modifications or work under the terms of Section 1
-+above, provided that you also meet all of these conditions:
-+
-+ a) You must cause the modified files to carry prominent notices
-+ stating that you changed the files and the date of any change.
-+
-+ b) You must cause any work that you distribute or publish, that in
-+ whole or in part contains or is derived from the Program or any
-+ part thereof, to be licensed as a whole at no charge to all third
-+ parties under the terms of this License.
-+
-+ c) If the modified program normally reads commands interactively
-+ when run, you must cause it, when started running for such
-+ interactive use in the most ordinary way, to print or display an
-+ announcement including an appropriate copyright notice and a
-+ notice that there is no warranty (or else, saying that you provide
-+ a warranty) and that users may redistribute the program under
-+ these conditions, and telling the user how to view a copy of this
-+ License. (Exception: if the Program itself is interactive but
-+ does not normally print such an announcement, your work based on
-+ the Program is not required to print an announcement.)
-+\f
-+These requirements apply to the modified work as a whole. If
-+identifiable sections of that work are not derived from the Program,
-+and can be reasonably considered independent and separate works in
-+themselves, then this License, and its terms, do not apply to those
-+sections when you distribute them as separate works. But when you
-+distribute the same sections as part of a whole which is a work based
-+on the Program, the distribution of the whole must be on the terms of
-+this License, whose permissions for other licensees extend to the
-+entire whole, and thus to each and every part regardless of who wrote it.
-+
-+Thus, it is not the intent of this section to claim rights or contest
-+your rights to work written entirely by you; rather, the intent is to
-+exercise the right to control the distribution of derivative or
-+collective works based on the Program.
-+
-+In addition, mere aggregation of another work not based on the Program
-+with the Program (or with a work based on the Program) on a volume of
-+a storage or distribution medium does not bring the other work under
-+the scope of this License.
-+
-+ 3. You may copy and distribute the Program (or a work based on it,
-+under Section 2) in object code or executable form under the terms of
-+Sections 1 and 2 above provided that you also do one of the following:
-+
-+ a) Accompany it with the complete corresponding machine-readable
-+ source code, which must be distributed under the terms of Sections
-+ 1 and 2 above on a medium customarily used for software interchange; or,
-+
-+ b) Accompany it with a written offer, valid for at least three
-+ years, to give any third party, for a charge no more than your
-+ cost of physically performing source distribution, a complete
-+ machine-readable copy of the corresponding source code, to be
-+ distributed under the terms of Sections 1 and 2 above on a medium
-+ customarily used for software interchange; or,
-+
-+ c) Accompany it with the information you received as to the offer
-+ to distribute corresponding source code. (This alternative is
-+ allowed only for noncommercial distribution and only if you
-+ received the program in object code or executable form with such
-+ an offer, in accord with Subsection b above.)
-+
-+The source code for a work means the preferred form of the work for
-+making modifications to it. For an executable work, complete source
-+code means all the source code for all modules it contains, plus any
-+associated interface definition files, plus the scripts used to
-+control compilation and installation of the executable. However, as a
-+special exception, the source code distributed need not include
-+anything that is normally distributed (in either source or binary
-+form) with the major components (compiler, kernel, and so on) of the
-+operating system on which the executable runs, unless that component
-+itself accompanies the executable.
-+
-+If distribution of executable or object code is made by offering
-+access to copy from a designated place, then offering equivalent
-+access to copy the source code from the same place counts as
-+distribution of the source code, even though third parties are not
-+compelled to copy the source along with the object code.
-+\f
-+ 4. You may not copy, modify, sublicense, or distribute the Program
-+except as expressly provided under this License. Any attempt
-+otherwise to copy, modify, sublicense or distribute the Program is
-+void, and will automatically terminate your rights under this License.
-+However, parties who have received copies, or rights, from you under
-+this License will not have their licenses terminated so long as such
-+parties remain in full compliance.
-+
-+ 5. You are not required to accept this License, since you have not
-+signed it. However, nothing else grants you permission to modify or
-+distribute the Program or its derivative works. These actions are
-+prohibited by law if you do not accept this License. Therefore, by
-+modifying or distributing the Program (or any work based on the
-+Program), you indicate your acceptance of this License to do so, and
-+all its terms and conditions for copying, distributing or modifying
-+the Program or works based on it.
-+
-+ 6. Each time you redistribute the Program (or any work based on the
-+Program), the recipient automatically receives a license from the
-+original licensor to copy, distribute or modify the Program subject to
-+these terms and conditions. You may not impose any further
-+restrictions on the recipients' exercise of the rights granted herein.
-+You are not responsible for enforcing compliance by third parties to
-+this License.
-+
-+ 7. If, as a consequence of a court judgment or allegation of patent
-+infringement or for any other reason (not limited to patent issues),
-+conditions are imposed on you (whether by court order, agreement or
-+otherwise) that contradict the conditions of this License, they do not
-+excuse you from the conditions of this License. If you cannot
-+distribute so as to satisfy simultaneously your obligations under this
-+License and any other pertinent obligations, then as a consequence you
-+may not distribute the Program at all. For example, if a patent
-+license would not permit royalty-free redistribution of the Program by
-+all those who receive copies directly or indirectly through you, then
-+the only way you could satisfy both it and this License would be to
-+refrain entirely from distribution of the Program.
-+
-+If any portion of this section is held invalid or unenforceable under
-+any particular circumstance, the balance of the section is intended to
-+apply and the section as a whole is intended to apply in other
-+circumstances.
-+
-+It is not the purpose of this section to induce you to infringe any
-+patents or other property right claims or to contest validity of any
-+such claims; this section has the sole purpose of protecting the
-+integrity of the free software distribution system, which is
-+implemented by public license practices. Many people have made
-+generous contributions to the wide range of software distributed
-+through that system in reliance on consistent application of that
-+system; it is up to the author/donor to decide if he or she is willing
-+to distribute software through any other system and a licensee cannot
-+impose that choice.
-+
-+This section is intended to make thoroughly clear what is believed to
-+be a consequence of the rest of this License.
-+\f
-+ 8. If the distribution and/or use of the Program is restricted in
-+certain countries either by patents or by copyrighted interfaces, the
-+original copyright holder who places the Program under this License
-+may add an explicit geographical distribution limitation excluding
-+those countries, so that distribution is permitted only in or among
-+countries not thus excluded. In such case, this License incorporates
-+the limitation as if written in the body of this License.
-+
-+ 9. The Free Software Foundation may publish revised and/or new versions
-+of the General Public License from time to time. Such new versions will
-+be similar in spirit to the present version, but may differ in detail to
-+address new problems or concerns.
-+
-+Each version is given a distinguishing version number. If the Program
-+specifies a version number of this License which applies to it and "any
-+later version", you have the option of following the terms and conditions
-+either of that version or of any later version published by the Free
-+Software Foundation. If the Program does not specify a version number of
-+this License, you may choose any version ever published by the Free Software
-+Foundation.
-+
-+ 10. If you wish to incorporate parts of the Program into other free
-+programs whose distribution conditions are different, write to the author
-+to ask for permission. For software which is copyrighted by the Free
-+Software Foundation, write to the Free Software Foundation; we sometimes
-+make exceptions for this. Our decision will be guided by the two goals
-+of preserving the free status of all derivatives of our free software and
-+of promoting the sharing and reuse of software generally.
-+
-+ NO WARRANTY
-+
-+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-+REPAIR OR CORRECTION.
-+
-+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-+POSSIBILITY OF SUCH DAMAGES.
-+
-+ END OF TERMS AND CONDITIONS
-diff --git a/firmware/lantiq/README b/firmware/lantiq/README
-new file mode 100644
-index 0000000..1b666d4
---- /dev/null
-+++ b/firmware/lantiq/README
-@@ -0,0 +1,45 @@
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+# (C) Copyright 2007 - 2012
-+# Lantiq Deutschland GmbH
-+#
-+# (C) Copyright 2012
-+# Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-+#
-+
-+#
-+# How to use
-+#
-+Configure kernel with:
-+CONFIG_FW_LOADER=y
-+CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR"
-+CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES"
-+
-+where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list
-+of space separated files from list below.
-+
-+#
-+# Firmware files
-+#
-+
-+# GPHY core on Lantiq XWAY VR9 v1.1
-+lantiq/vr9_phy11g_a1x.bin
-+lantiq/vr9_phy22f_a1x.bin
-+
-+# GPHY core on Lantiq XWAY VR9 v1.2
-+lantiq/vr9_phy11g_a2x.bin
-+lantiq/vr9_phy22f_a2x.bin
---
-1.7.10.4
-
--- /dev/null
+From 4400e1f593ea40a51912128adb4f53d59e62cad8 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 10 Sep 2014 22:40:18 +0200
+Subject: [PATCH 22/36] MTD: m25p80: allow loading mtd name from OF
+
+In accordance with the physmap flash we should honour the linux,mtd-name
+property when deciding what name the mtd device has.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/devices/m25p80.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
+index ad19139..9f7b35a 100644
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -1097,6 +1097,10 @@ static int m25p_probe(struct spi_device *spi)
+ struct mtd_part_parser_data ppdata;
+ struct device_node *np = spi->dev.of_node;
+ int ret;
++ const char __maybe_unused *of_mtd_name = NULL;
++
++ of_property_read_string(spi->dev.of_node,
++ "linux,mtd-name", &of_mtd_name);
+
+ /* Platform data helps sort out which chip type we have, as
+ * well as how this board partitions it. If we don't have
+@@ -1169,6 +1173,8 @@ static int m25p_probe(struct spi_device *spi)
+
+ if (data && data->name)
+ flash->mtd.name = data->name;
++ else if (of_mtd_name)
++ flash->mtd.name = of_mtd_name;
+ else
+ flash->mtd.name = dev_name(&spi->dev);
+
+--
+1.7.10.4
+
+++ /dev/null
-From 96f50ccba9258367e5c3a48fe6295572daac69d3 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Oct 2012 12:22:23 +0200
-Subject: [PATCH 22/31] NET: MIPS: lantiq: adds xrx200-net
-
----
- drivers/net/ethernet/Kconfig | 8 +-
- drivers/net/ethernet/Makefile | 1 +
- drivers/net/ethernet/lantiq_pce.h | 163 +++
- drivers/net/ethernet/lantiq_xrx200.c | 1798 +++++++++++++++++++++++++++++++
- drivers/net/ethernet/lantiq_xrx200_sw.h | 1328 +++++++++++++++++++++++
- 5 files changed, 3297 insertions(+), 1 deletion(-)
- create mode 100644 drivers/net/ethernet/lantiq_pce.h
- create mode 100644 drivers/net/ethernet/lantiq_xrx200.c
- create mode 100644 drivers/net/ethernet/lantiq_xrx200_sw.h
-
-diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
-index 506b024..0a0dbe6 100644
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -84,7 +84,13 @@ config LANTIQ_ETOP
- tristate "Lantiq SoC ETOP driver"
- depends on SOC_TYPE_XWAY
- ---help---
-- Support for the MII0 inside the Lantiq SoC
-+ Support for the MII0 inside the Lantiq ADSL SoC
-+
-+config LANTIQ_XRX200
-+ tristate "Lantiq SoC XRX200 driver"
-+ depends on SOC_TYPE_XWAY
-+ ---help---
-+ Support for the MII0 inside the Lantiq VDSL SoC
-
- source "drivers/net/ethernet/marvell/Kconfig"
- source "drivers/net/ethernet/mellanox/Kconfig"
-diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
-index c0b8789..459cce8 100644
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -38,6 +38,7 @@ obj-$(CONFIG_IP1000) += icplus/
- obj-$(CONFIG_JME) += jme.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
-+obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o
- obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
- obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
- obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
-diff --git a/drivers/net/ethernet/lantiq_pce.h b/drivers/net/ethernet/lantiq_pce.h
-new file mode 100644
-index 0000000..0c38efe
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_pce.h
-@@ -0,0 +1,163 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ * PCE microcode extracted from UGW5.2 switch api
-+ */
-+
-+/* Switch API Micro Code V0.3 */
-+enum {
-+ OUT_MAC0 = 0,
-+ OUT_MAC1,
-+ OUT_MAC2,
-+ OUT_MAC3,
-+ OUT_MAC4,
-+ OUT_MAC5,
-+ OUT_ETHTYP,
-+ OUT_VTAG0,
-+ OUT_VTAG1,
-+ OUT_ITAG0,
-+ OUT_ITAG1, /*10 */
-+ OUT_ITAG2,
-+ OUT_ITAG3,
-+ OUT_IP0,
-+ OUT_IP1,
-+ OUT_IP2,
-+ OUT_IP3,
-+ OUT_SIP0,
-+ OUT_SIP1,
-+ OUT_SIP2,
-+ OUT_SIP3, /*20*/
-+ OUT_SIP4,
-+ OUT_SIP5,
-+ OUT_SIP6,
-+ OUT_SIP7,
-+ OUT_DIP0,
-+ OUT_DIP1,
-+ OUT_DIP2,
-+ OUT_DIP3,
-+ OUT_DIP4,
-+ OUT_DIP5, /*30*/
-+ OUT_DIP6,
-+ OUT_DIP7,
-+ OUT_SESID,
-+ OUT_PROT,
-+ OUT_APP0,
-+ OUT_APP1,
-+ OUT_IGMP0,
-+ OUT_IGMP1,
-+ OUT_IPOFF, /*39*/
-+ OUT_NONE = 63
-+};
-+
-+/* parser's microcode length type */
-+#define INSTR 0
-+#define IPV6 1
-+#define LENACCU 2
-+
-+/* parser's microcode flag type */
-+enum {
-+ FLAG_ITAG = 0,
-+ FLAG_VLAN,
-+ FLAG_SNAP,
-+ FLAG_PPPOE,
-+ FLAG_IPV6,
-+ FLAG_IPV6FL,
-+ FLAG_IPV4,
-+ FLAG_IGMP,
-+ FLAG_TU,
-+ FLAG_HOP,
-+ FLAG_NN1, /*10 */
-+ FLAG_NN2,
-+ FLAG_END,
-+ FLAG_NO, /*13*/
-+};
-+
-+/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */
-+#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \
-+ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }}
-+struct pce_microcode {
-+ unsigned short val[4];
-+/* unsigned short val_2;
-+ unsigned short val_1;
-+ unsigned short val_0;*/
-+} pce_microcode[] = {
-+ /* value mask ns fields L type flags ipv4_len */
-+ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0),
-+ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0),
-+ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1),
-+ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0),
-+ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0),
-+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0),
-+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0),
-+ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0),
-+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0),
-+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+};
-diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c
-new file mode 100644
-index 0000000..2da9d47
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -0,0 +1,1798 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2010 Lantiq Deutschland
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/switch.h>
-+#include <linux/etherdevice.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <asm/delay.h>
-+
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_gpio.h>
-+
-+#include <xway_dma.h>
-+#include <lantiq_soc.h>
-+
-+#include "lantiq_pce.h"
-+#include "lantiq_xrx200_sw.h"
-+
-+#define SW_POLLING
-+#define SW_ROUTING
-+#define SW_PORTMAP
-+
-+#ifdef SW_ROUTING
-+ #ifdef SW_PORTMAP
-+#define XRX200_MAX_DEV 2
-+ #else
-+#define XRX200_MAX_DEV 2
-+ #endif
-+#else
-+#define XRX200_MAX_DEV 1
-+#endif
-+
-+#define XRX200_MAX_VLAN 64
-+#define XRX200_PCE_ACTVLAN_IDX 0x01
-+#define XRX200_PCE_VLANMAP_IDX 0x02
-+
-+#define XRX200_MAX_PORT 7
-+#define XRX200_MAX_DMA 8
-+
-+#define XRX200_HEADROOM 4
-+
-+#define XRX200_TX_TIMEOUT (10 * HZ)
-+
-+/* port type */
-+#define XRX200_PORT_TYPE_PHY 1
-+#define XRX200_PORT_TYPE_MAC 2
-+
-+/* DMA */
-+#define XRX200_DMA_DATA_LEN 0x600
-+#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0
-+#define XRX200_DMA_RX 0
-+#define XRX200_DMA_TX 1
-+#define XRX200_DMA_IS_TX(x) (x%2)
-+#define XRX200_DMA_IS_RX(x) (!XRX200_DMA_IS_TX(x))
-+
-+/* fetch / store dma */
-+#define FDMA_PCTRL0 0x2A00
-+#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18))
-+#define SDMA_PCTRL0 0x2F00
-+#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18))
-+
-+/* buffer management */
-+#define BM_PCFG0 0x200
-+#define BM_PCFGx(x) (BM_PCFG0 + (x * 8))
-+
-+/* MDIO */
-+#define MDIO_GLOB 0x0000
-+#define MDIO_CTRL 0x0020
-+#define MDIO_READ 0x0024
-+#define MDIO_WRITE 0x0028
-+#define MDIO_PHY0 0x0054
-+#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned)))
-+#define MDIO_CLK_CFG0 0x002C
-+#define MDIO_CLK_CFG1 0x0030
-+
-+#define MDIO_GLOB_ENABLE 0x8000
-+#define MDIO_BUSY BIT(12)
-+#define MDIO_RD BIT(11)
-+#define MDIO_WR BIT(10)
-+#define MDIO_MASK 0x1f
-+#define MDIO_ADDRSHIFT 5
-+#define MDIO1_25MHZ 9
-+
-+#define MDIO_PHY_LINK_DOWN 0x4000
-+#define MDIO_PHY_LINK_UP 0x2000
-+
-+#define MDIO_PHY_SPEED_M10 0x0000
-+#define MDIO_PHY_SPEED_M100 0x0800
-+#define MDIO_PHY_SPEED_G1 0x1000
-+
-+#define MDIO_PHY_FDUP_EN 0x0200
-+#define MDIO_PHY_FDUP_DIS 0x0600
-+
-+#define MDIO_PHY_LINK_MASK 0x6000
-+#define MDIO_PHY_SPEED_MASK 0x1800
-+#define MDIO_PHY_FDUP_MASK 0x0600
-+#define MDIO_PHY_ADDR_MASK 0x001f
-+#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \
-+ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK
-+
-+/* MII */
-+#define MII_CFG(p) (p * 8)
-+
-+#define MII_CFG_EN BIT(14)
-+
-+#define MII_CFG_MODE_MIIP 0x0
-+#define MII_CFG_MODE_MIIM 0x1
-+#define MII_CFG_MODE_RMIIP 0x2
-+#define MII_CFG_MODE_RMIIM 0x3
-+#define MII_CFG_MODE_RGMII 0x4
-+#define MII_CFG_MODE_MASK 0xf
-+
-+#define MII_CFG_RATE_M2P5 0x00
-+#define MII_CFG_RATE_M25 0x10
-+#define MII_CFG_RATE_M125 0x20
-+#define MII_CFG_RATE_M50 0x30
-+#define MII_CFG_RATE_AUTO 0x40
-+#define MII_CFG_RATE_MASK 0x70
-+
-+/* cpu port mac */
-+#define PMAC_HD_CTL 0x0000
-+#define PMAC_RX_IPG 0x0024
-+#define PMAC_EWAN 0x002c
-+
-+#define PMAC_IPG_MASK 0xf
-+#define PMAC_HD_CTL_AS 0x0008
-+#define PMAC_HD_CTL_AC 0x0004
-+#define PMAC_HD_CTL_RXSH 0x0040
-+#define PMAC_HD_CTL_AST 0x0080
-+#define PMAC_HD_CTL_RST 0x0100
-+
-+/* PCE */
-+#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4))
-+#define PCE_TBL_MASK 0x1120
-+#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4))
-+#define PCE_TBL_ADDR 0x1138
-+#define PCE_TBL_CTRL 0x113c
-+#define PCE_PMAP1 0x114c
-+#define PCE_PMAP2 0x1150
-+#define PCE_PMAP3 0x1154
-+#define PCE_GCTRL_REG(x) (0x1158 + (x * 4))
-+#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4))
-+
-+#define PCE_TBL_BUSY BIT(15)
-+#define PCE_TBL_CFG_ADDR_MASK 0x1f
-+#define PCE_TBL_CFG_ADWR 0x20
-+#define PCE_TBL_CFG_ADWR_MASK 0x60
-+#define PCE_INGRESS BIT(11)
-+
-+/* MAC */
-+#define MAC_FLEN_REG (0x2314)
-+#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4))
-+
-+/* buffer management */
-+#define BM_PCFG(p) (0x200 + (p * 8))
-+
-+/* special tag in TX path header */
-+#define SPID_SHIFT 24
-+#define DPID_SHIFT 16
-+#define DPID_ENABLE 1
-+#define SPID_CPU_PORT 2
-+#define PORT_MAP_SEL BIT(15)
-+#define PORT_MAP_EN BIT(14)
-+#define PORT_MAP_SHIFT 1
-+#define PORT_MAP_MASK 0x3f
-+
-+#define SPPID_MASK 0x7
-+#define SPPID_SHIFT 4
-+
-+/* MII regs not yet in linux */
-+#define MDIO_DEVAD_NONE (-1)
-+#define ADVERTIZE_MPD (1 << 10)
-+
-+struct xrx200_port {
-+ u8 num;
-+ u8 phy_addr;
-+ u16 flags;
-+ phy_interface_t phy_if;
-+
-+ int link;
-+ int gpio;
-+ enum of_gpio_flags gpio_flags;
-+
-+ struct phy_device *phydev;
-+ struct device_node *phy_node;
-+};
-+
-+struct xrx200_chan {
-+ int idx;
-+ int refcount;
-+ int tx_free;
-+
-+ struct net_device dummy_dev;
-+ struct net_device *devs[XRX200_MAX_DEV];
-+
-+ struct tasklet_struct tasklet;
-+ struct napi_struct napi;
-+ struct ltq_dma_channel dma;
-+ struct sk_buff *skb[LTQ_DESC_NUM];
-+};
-+
-+struct xrx200_hw {
-+ struct clk *clk;
-+ struct mii_bus *mii_bus;
-+
-+ struct xrx200_chan chan[XRX200_MAX_DMA];
-+
-+ struct net_device *devs[XRX200_MAX_DEV];
-+ int num_devs;
-+
-+ int port_map[XRX200_MAX_PORT];
-+ unsigned short wan_map;
-+
-+ spinlock_t lock;
-+
-+ struct switch_dev swdev;
-+};
-+
-+struct xrx200_priv {
-+ struct net_device_stats stats;
-+ int id;
-+
-+ struct xrx200_port port[XRX200_MAX_PORT];
-+ int num_port;
-+ bool wan;
-+ bool sw;
-+ unsigned short port_map;
-+ unsigned char mac[6];
-+
-+ struct xrx200_hw *hw;
-+};
-+
-+static __iomem void *xrx200_switch_membase;
-+static __iomem void *xrx200_mii_membase;
-+static __iomem void *xrx200_mdio_membase;
-+static __iomem void *xrx200_pmac_membase;
-+
-+#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x))
-+#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y))
-+#define ltq_switch_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_switch_membase + (z))
-+
-+#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x))
-+#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y))
-+#define ltq_mdio_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_mdio_membase + (z))
-+
-+#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x))
-+#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y))
-+#define ltq_mii_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_mii_membase + (z))
-+
-+#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x))
-+#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y))
-+#define ltq_pmac_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_pmac_membase + (z))
-+
-+#define XRX200_GLOBAL_REGATTR(reg) \
-+ .id = reg, \
-+ .type = SWITCH_TYPE_INT, \
-+ .set = xrx200_set_global_attr, \
-+ .get = xrx200_get_global_attr
-+
-+#define XRX200_PORT_REGATTR(reg) \
-+ .id = reg, \
-+ .type = SWITCH_TYPE_INT, \
-+ .set = xrx200_set_port_attr, \
-+ .get = xrx200_get_port_attr
-+
-+static int xrx200sw_read_x(int reg, int x)
-+{
-+ int value, mask, addr;
-+
-+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
-+ value = ltq_switch_r32(addr);
-+ mask = (1 << xrx200sw_reg[reg].size) - 1;
-+ value = (value >> xrx200sw_reg[reg].shift);
-+
-+ return (value & mask);
-+}
-+
-+static int xrx200sw_read(int reg)
-+{
-+ return xrx200sw_read_x(reg, 0);
-+}
-+
-+static void xrx200sw_write_x(int value, int reg, int x)
-+{
-+ int mask, addr;
-+
-+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
-+ mask = (1 << xrx200sw_reg[reg].size) - 1;
-+ mask = (mask << xrx200sw_reg[reg].shift);
-+ value = (value << xrx200sw_reg[reg].shift) & mask;
-+
-+ ltq_switch_w32_mask(mask, value, addr);
-+}
-+
-+static void xrx200sw_write(int value, int reg)
-+{
-+ xrx200sw_write_x(value, reg, 0);
-+}
-+
-+struct xrx200_pce_table_entry {
-+ int index; // PCE_TBL_ADDR.ADDR = pData->table_index
-+ int table; // PCE_TBL_CTRL.ADDR = pData->table
-+ unsigned short key[8];
-+ unsigned short val[5];
-+ unsigned short mask;
-+ unsigned short type;
-+ unsigned short valid;
-+ unsigned short gmap;
-+};
-+
-+static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl)
-+{
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ // prepare the table access:
-+ // PCE_TBL_ADDR.ADDR = pData->table_index
-+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
-+ // PCE_TBL_CTRL.ADDR = pData->table
-+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
-+
-+ //(address-based read)
-+ xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
-+
-+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
-+
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ // read the keys
-+ tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7);
-+ tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6);
-+ tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5);
-+ tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4);
-+ tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3);
-+ tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2);
-+ tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1);
-+ tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0);
-+
-+ // read the values
-+ tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4);
-+ tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3);
-+ tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2);
-+ tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1);
-+ tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0);
-+
-+ // read the mask
-+ tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0);
-+ // read the type
-+ tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE);
-+ // read the valid flag
-+ tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD);
-+ // read the group map
-+ tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP);
-+
-+ return 0;
-+}
-+
-+static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl)
-+{
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ // prepare the table access:
-+ // PCE_TBL_ADDR.ADDR = pData->table_index
-+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
-+ // PCE_TBL_CTRL.ADDR = pData->table
-+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
-+
-+ //(address-based write)
-+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
-+
-+ // read the keys
-+ xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7);
-+ xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6);
-+ xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5);
-+ xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4);
-+ xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3);
-+ xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2);
-+ xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1);
-+ xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0);
-+
-+ // read the values
-+ xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4);
-+ xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3);
-+ xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2);
-+ xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1);
-+ xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0);
-+
-+ // read the mask
-+ xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0);
-+ // read the type
-+ xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE);
-+ // read the valid flag
-+ xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD);
-+ // read the group map
-+ xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP);
-+
-+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
-+
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ return 0;
-+}
-+
-+static void xrx200sw_fixup_pvids(void)
-+{
-+ int index, p, portmap, untagged;
-+ struct xrx200_pce_table_entry tem;
-+ struct xrx200_pce_table_entry tev;
-+
-+ portmap = 0;
-+ for (p = 0; p < XRX200_MAX_PORT; p++)
-+ portmap |= BIT(p);
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+
-+ for (index = XRX200_MAX_VLAN; index-- > 0;)
-+ {
-+ tev.index = index;
-+ xrx200_pce_table_entry_read(&tev);
-+
-+ if (tev.valid == 0)
-+ continue;
-+
-+ tem.index = index;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ if (tem.val[0] == 0)
-+ continue;
-+
-+ untagged = portmap & (tem.val[1] ^ tem.val[2]);
-+
-+ for (p = 0; p < XRX200_MAX_PORT; p++)
-+ if (untagged & BIT(p))
-+ {
-+ portmap &= ~BIT(p);
-+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
-+ }
-+
-+ for (p = 0; p < XRX200_MAX_PORT; p++)
-+ if (portmap & BIT(p))
-+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
-+ }
-+}
-+
-+// swconfig interface
-+static void xrx200_hw_init(struct xrx200_hw *hw);
-+
-+// global
-+static int xrx200sw_reset_switch(struct switch_dev *dev)
-+{
-+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
-+
-+ xrx200_hw_init(hw);
-+
-+ return 0;
-+}
-+
-+static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ int p;
-+
-+ if ((attr->max > 0) && (val->value.i > attr->max))
-+ return -EINVAL;
-+
-+ for (p = 0; p < XRX200_MAX_PORT; p++) {
-+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p);
-+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p);
-+ }
-+
-+ xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN);
-+ return 0;
-+}
-+
-+static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ val->value.i = xrx200sw_read(attr->id);
-+ return 0;
-+}
-+
-+static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ if ((attr->max > 0) && (val->value.i > attr->max))
-+ return -EINVAL;
-+
-+ xrx200sw_write(val->value.i, attr->id);
-+ return 0;
-+}
-+
-+static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ val->value.i = xrx200sw_read(attr->id);
-+ return 0;
-+}
-+
-+// vlan
-+static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ int i;
-+ struct xrx200_pce_table_entry tev;
-+ struct xrx200_pce_table_entry tem;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+
-+ for (i = 0; i < XRX200_MAX_VLAN; i++)
-+ {
-+ tev.index = i;
-+ xrx200_pce_table_entry_read(&tev);
-+ if (tev.key[0] == val->value.i && i != val->port_vlan)
-+ return -EINVAL;
-+ }
-+
-+ tev.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tev);
-+ tev.key[0] = val->value.i;
-+ tev.valid = val->value.i > 0;
-+ xrx200_pce_table_entry_write(&tev);
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+ tem.val[0] = val->value.i;
-+ xrx200_pce_table_entry_write(&tem);
-+
-+ xrx200sw_fixup_pvids();
-+ return 0;
-+}
-+
-+static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct xrx200_pce_table_entry te;
-+
-+ te.table = XRX200_PCE_ACTVLAN_IDX;
-+ te.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&te);
-+ val->value.i = te.key[0];
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ int i, portmap, tagmap, untagged;
-+ struct xrx200_pce_table_entry tem;
-+
-+ portmap = 0;
-+ tagmap = 0;
-+ for (i = 0; i < val->len; i++)
-+ {
-+ struct switch_port *p = &val->value.ports[i];
-+
-+ portmap |= (1 << p->id);
-+ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
-+ tagmap |= (1 << p->id);
-+ }
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+
-+ untagged = portmap ^ tagmap;
-+ for (i = 0; i < XRX200_MAX_VLAN; i++)
-+ {
-+ tem.index = i;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ if (tem.val[0] == 0)
-+ continue;
-+
-+ if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i))
-+ return -EINVAL;
-+ }
-+
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ // auto-enable this vlan if not enabled already
-+ if (tem.val[0] == 0)
-+ {
-+ struct switch_val v;
-+ v.port_vlan = val->port_vlan;
-+ v.value.i = val->port_vlan;
-+ if(xrx200sw_set_vlan_vid(dev, NULL, &v))
-+ return -EINVAL;
-+
-+ //read updated tem
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+ }
-+
-+ tem.val[1] = portmap;
-+ tem.val[2] = tagmap;
-+ xrx200_pce_table_entry_write(&tem);
-+
-+ xrx200sw_fixup_pvids();
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ int i;
-+ unsigned short ports, tags;
-+ struct xrx200_pce_table_entry tem;
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ ports = tem.val[1];
-+ tags = tem.val[2];
-+
-+ for (i = 0; i < XRX200_MAX_PORT; i++) {
-+ struct switch_port *p;
-+
-+ if (!(ports & (1 << i)))
-+ continue;
-+
-+ p = &val->value.ports[val->len++];
-+ p->id = i;
-+ if (tags & (1 << i))
-+ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
-+ else
-+ p->flags = 0;
-+ }
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct xrx200_pce_table_entry tev;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+ tev.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tev);
-+
-+ if (tev.key[0] == 0)
-+ return -EINVAL;
-+
-+ tev.valid = val->value.i;
-+ xrx200_pce_table_entry_write(&tev);
-+
-+ xrx200sw_fixup_pvids();
-+ return 0;
-+}
-+
-+static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct xrx200_pce_table_entry tev;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+ tev.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tev);
-+ val->value.i = tev.valid;
-+
-+ return 0;
-+}
-+
-+// port
-+static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val)
-+{
-+ struct xrx200_pce_table_entry tev;
-+
-+ if (port >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+ tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port);
-+ xrx200_pce_table_entry_read(&tev);
-+
-+ *val = tev.key[0];
-+ return 0;
-+}
-+
-+static int xrx200sw_get_port_link(struct switch_dev *dev,
-+ int port,
-+ struct switch_port_link *link)
-+{
-+ if (port >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port);
-+ if (!link->link)
-+ return 0;
-+
-+ link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port);
-+
-+ link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010);
-+ link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020);
-+ link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port));
-+
-+ link->speed = SWITCH_PORT_SPEED_10;
-+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port))
-+ link->speed = SWITCH_PORT_SPEED_100;
-+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port))
-+ link->speed = SWITCH_PORT_SPEED_1000;
-+
-+ return 0;
-+}
-+
-+static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ printk("%s %s(%d)\n", __FILE__, __func__, __LINE__);
-+ if (val->port_vlan >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ if ((attr->max > 0) && (val->value.i > attr->max))
-+ return -EINVAL;
-+
-+ xrx200sw_write_x(val->value.i, attr->id, val->port_vlan);
-+ return 0;
-+}
-+
-+static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ if (val->port_vlan >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ val->value.i = xrx200sw_read_x(attr->id, val->port_vlan);
-+ return 0;
-+}
-+
-+// attributes
-+static struct switch_attr xrx200sw_globals[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .set = xrx200_set_vlan_mode_enable,
-+ .get = xrx200_get_vlan_mode_enable,
-+ .name = "enable_vlan",
-+ .description = "Enable VLAN mode",
-+ .max = 1},
-+};
-+
-+static struct switch_attr xrx200sw_port[] = {
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR),
-+ .name = "uvr",
-+ .description = "Unknown VLAN Rule",
-+ .max = 1,
-+ },
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR),
-+ .name = "vsr",
-+ .description = "VLAN Security Rule",
-+ .max = 1,
-+ },
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR),
-+ .name = "vinr",
-+ .description = "VLAN Ingress Tag Rule",
-+ .max = 2,
-+ },
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM),
-+ .name = "tvm",
-+ .description = "Transparent VLAN Mode",
-+ .max = 1,
-+ },
-+};
-+
-+static struct switch_attr xrx200sw_vlan[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "vid",
-+ .description = "VLAN ID (0-4094)",
-+ .set = xrx200sw_set_vlan_vid,
-+ .get = xrx200sw_get_vlan_vid,
-+ .max = 4094,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "enable",
-+ .description = "Enable VLAN",
-+ .set = xrx200sw_set_vlan_enable,
-+ .get = xrx200sw_get_vlan_enable,
-+ .max = 1,
-+ },
-+};
-+
-+static const struct switch_dev_ops xrx200sw_ops = {
-+ .attr_global = {
-+ .attr = xrx200sw_globals,
-+ .n_attr = ARRAY_SIZE(xrx200sw_globals),
-+ },
-+ .attr_port = {
-+ .attr = xrx200sw_port,
-+ .n_attr = ARRAY_SIZE(xrx200sw_port),
-+ },
-+ .attr_vlan = {
-+ .attr = xrx200sw_vlan,
-+ .n_attr = ARRAY_SIZE(xrx200sw_vlan),
-+ },
-+ .get_vlan_ports = xrx200sw_get_vlan_ports,
-+ .set_vlan_ports = xrx200sw_set_vlan_ports,
-+ .get_port_pvid = xrx200sw_get_port_pvid,
-+ .reset_switch = xrx200sw_reset_switch,
-+ .get_port_link = xrx200sw_get_port_link,
-+// .get_port_stats = xrx200sw_get_port_stats, //TODO
-+};
-+
-+static int xrx200sw_init(struct xrx200_hw *hw)
-+{
-+ int netdev_num;
-+
-+ for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++)
-+ {
-+ struct switch_dev *swdev;
-+ struct net_device *dev = hw->devs[netdev_num];
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ if (!priv->sw)
-+ continue;
-+
-+ swdev = &hw->swdev;
-+
-+ swdev->name = "Lantiq XRX200 Switch";
-+ swdev->vlans = XRX200_MAX_VLAN;
-+ swdev->ports = XRX200_MAX_PORT;
-+ swdev->cpu_port = 6;
-+ swdev->ops = &xrx200sw_ops;
-+
-+ register_switch(swdev, dev);
-+ return 0; // enough switches
-+ }
-+ return 0;
-+}
-+
-+static int xrx200_open(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ unsigned long flags;
-+ int i;
-+
-+ for (i = 0; i < XRX200_MAX_DMA; i++) {
-+ if (!priv->hw->chan[i].dma.irq)
-+ continue;
-+ spin_lock_irqsave(&priv->hw->lock, flags);
-+ if (!priv->hw->chan[i].refcount) {
-+ if (XRX200_DMA_IS_RX(i))
-+ napi_enable(&priv->hw->chan[i].napi);
-+ ltq_dma_open(&priv->hw->chan[i].dma);
-+ }
-+ priv->hw->chan[i].refcount++;
-+ spin_unlock_irqrestore(&priv->hw->lock, flags);
-+ }
-+ for (i = 0; i < priv->num_port; i++)
-+ if (priv->port[i].phydev)
-+ phy_start(priv->port[i].phydev);
-+ netif_start_queue(dev);
-+
-+ return 0;
-+}
-+
-+static int xrx200_close(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ unsigned long flags;
-+ int i;
-+
-+ netif_stop_queue(dev);
-+
-+ for (i = 0; i < priv->num_port; i++)
-+ if (priv->port[i].phydev)
-+ phy_stop(priv->port[i].phydev);
-+
-+ for (i = 0; i < XRX200_MAX_DMA; i++) {
-+ if (!priv->hw->chan[i].dma.irq)
-+ continue;
-+ spin_lock_irqsave(&priv->hw->lock, flags);
-+ priv->hw->chan[i].refcount--;
-+ if (!priv->hw->chan[i].refcount) {
-+ if (XRX200_DMA_IS_RX(i))
-+ napi_disable(&priv->hw->chan[i].napi);
-+ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma);
-+ }
-+ spin_unlock_irqrestore(&priv->hw->lock, flags);
-+ }
-+
-+ return 0;
-+}
-+
-+static int xrx200_alloc_skb(struct xrx200_chan *ch)
-+{
-+#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD)
-+ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD);
-+ if (!ch->skb[ch->dma.desc])
-+ return -ENOMEM;
-+
-+ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD);
-+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
-+ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
-+ DMA_FROM_DEVICE);
-+ ch->dma.desc_base[ch->dma.desc].addr =
-+ CPHYSADDR(ch->skb[ch->dma.desc]->data);
-+ ch->dma.desc_base[ch->dma.desc].ctl =
-+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
-+ XRX200_DMA_DATA_LEN;
-+ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
-+
-+ return 0;
-+}
-+
-+static void xrx200_hw_receive(struct xrx200_chan *ch, int id)
-+{
-+ struct net_device *dev = ch->devs[id];
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ struct sk_buff *skb = ch->skb[ch->dma.desc];
-+ int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - ETH_FCS_LEN;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->hw->lock, flags);
-+ if (xrx200_alloc_skb(ch)) {
-+ netdev_err(dev,
-+ "failed to allocate new rx buffer, stopping DMA\n");
-+ ltq_dma_close(&ch->dma);
-+ }
-+
-+ ch->dma.desc++;
-+ ch->dma.desc %= LTQ_DESC_NUM;
-+ spin_unlock_irqrestore(&priv->hw->lock, flags);
-+
-+ skb_put(skb, len);
-+#ifdef SW_ROUTING
-+ skb_pull(skb, 8);
-+#endif
-+ skb->dev = dev;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ netif_receive_skb(skb);
-+ priv->stats.rx_packets++;
-+ priv->stats.rx_bytes+=len;
-+}
-+
-+static int xrx200_poll_rx(struct napi_struct *napi, int budget)
-+{
-+ struct xrx200_chan *ch = container_of(napi,
-+ struct xrx200_chan, napi);
-+ struct xrx200_priv *priv = netdev_priv(ch->devs[0]);
-+ int rx = 0;
-+ int complete = 0;
-+ unsigned long flags;
-+
-+ while ((rx < budget) && !complete) {
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+#ifdef SW_ROUTING
-+ struct sk_buff *skb = ch->skb[ch->dma.desc];
-+ u32 *special_tag = (u32*)skb->data;
-+ int port = (special_tag[1] >> SPPID_SHIFT) & SPPID_MASK;
-+ xrx200_hw_receive(ch, priv->hw->port_map[port]);
-+#else
-+ xrx200_hw_receive(ch, 0);
-+#endif
-+ rx++;
-+ } else {
-+ complete = 1;
-+ }
-+ }
-+ if (complete || !rx) {
-+ napi_complete(&ch->napi);
-+ spin_lock_irqsave(&priv->hw->lock, flags);
-+ ltq_dma_ack_irq(&ch->dma);
-+ spin_unlock_irqrestore(&priv->hw->lock, flags);
-+ }
-+ return rx;
-+}
-+
-+static void xrx200_tx_housekeeping(unsigned long ptr)
-+{
-+ struct xrx200_hw *hw = (struct xrx200_hw *) ptr;
-+ struct xrx200_chan *ch = &hw->chan[XRX200_DMA_TX];
-+ unsigned long flags;
-+ int i;
-+
-+ spin_lock_irqsave(&hw->lock, flags);
-+ while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+ dev_kfree_skb_any(ch->skb[ch->tx_free]);
-+ ch->skb[ch->tx_free] = NULL;
-+ memset(&ch->dma.desc_base[ch->tx_free], 0,
-+ sizeof(struct ltq_dma_desc));
-+ ch->tx_free++;
-+ ch->tx_free %= LTQ_DESC_NUM;
-+ }
-+ spin_unlock_irqrestore(&hw->lock, flags);
-+
-+ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++) {
-+ struct netdev_queue *txq =
-+ netdev_get_tx_queue(ch->devs[i], 0);
-+ if (netif_tx_queue_stopped(txq))
-+ netif_tx_start_queue(txq);
-+ }
-+
-+ spin_lock_irqsave(&hw->lock, flags);
-+ ltq_dma_ack_irq(&ch->dma);
-+ spin_unlock_irqrestore(&hw->lock, flags);
-+}
-+
-+static struct net_device_stats *xrx200_get_stats (struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+
-+ return &priv->stats;
-+}
-+
-+static void xrx200_tx_timeout(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+
-+ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name);
-+
-+ priv->stats.tx_errors++;
-+ netif_wake_queue(dev);
-+}
-+
-+static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ int queue = skb_get_queue_mapping(skb);
-+ struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct xrx200_chan *ch = &priv->hw->chan[XRX200_DMA_TX];
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ unsigned long flags;
-+ u32 byte_offset;
-+ int len;
-+#ifdef SW_ROUTING
-+ #ifdef SW_PORTMAP
-+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | PORT_MAP_SEL | PORT_MAP_EN | DPID_ENABLE;
-+ #else
-+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE;
-+ #endif
-+#endif
-+
-+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-+
-+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
-+ netdev_err(dev, "tx ring full\n");
-+ netif_tx_stop_queue(txq);
-+ return NETDEV_TX_BUSY;
-+ }
-+#ifdef SW_ROUTING
-+ #ifdef SW_PORTMAP
-+ special_tag |= priv->port_map << PORT_MAP_SHIFT;
-+ #else
-+ if(priv->id)
-+ special_tag |= (1 << DPID_SHIFT);
-+ #endif
-+ if(skb_headroom(skb) < 4) {
-+ struct sk_buff *tmp = skb_realloc_headroom(skb, 4);
-+ dev_kfree_skb_any(skb);
-+ skb = tmp;
-+ }
-+ skb_push(skb, 4);
-+ memcpy(skb->data, &special_tag, sizeof(u32));
-+ len += 4;
-+#endif
-+
-+ /* dma needs to start on a 16 byte aligned address */
-+ byte_offset = CPHYSADDR(skb->data) % 16;
-+ ch->skb[ch->dma.desc] = skb;
-+
-+ dev->trans_start = jiffies;
-+
-+ spin_lock_irqsave(&priv->hw->lock, flags);
-+ desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
-+ DMA_TO_DEVICE)) - byte_offset;
-+ wmb();
-+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
-+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
-+ ch->dma.desc++;
-+ ch->dma.desc %= LTQ_DESC_NUM;
-+ spin_unlock_irqrestore(&priv->hw->lock, flags);
-+
-+ if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
-+ netif_tx_stop_queue(txq);
-+
-+ priv->stats.tx_packets++;
-+ priv->stats.tx_bytes+=len;
-+
-+ return NETDEV_TX_OK;
-+}
-+
-+static irqreturn_t xrx200_dma_irq(int irq, void *priv)
-+{
-+ struct xrx200_hw *hw = priv;
-+ int ch = irq - XRX200_DMA_IRQ;
-+
-+ if (ch % 2)
-+ tasklet_schedule(&hw->chan[ch].tasklet);
-+ else
-+ napi_schedule(&hw->chan[ch].napi);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int xrx200_dma_init(struct xrx200_hw *hw)
-+{
-+ int i, err = 0;
-+
-+ ltq_dma_init_port(DMA_PORT_ETOP);
-+
-+ for (i = 0; i < 8 && !err; i++) {
-+ int irq = XRX200_DMA_IRQ + i;
-+ struct xrx200_chan *ch = &hw->chan[i];
-+
-+ ch->idx = ch->dma.nr = i;
-+
-+ if (i == XRX200_DMA_TX) {
-+ ltq_dma_alloc_tx(&ch->dma);
-+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw);
-+ } else if (i == XRX200_DMA_RX) {
-+ ltq_dma_alloc_rx(&ch->dma);
-+ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
-+ ch->dma.desc++)
-+ if (xrx200_alloc_skb(ch))
-+ err = -ENOMEM;
-+ ch->dma.desc = 0;
-+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw);
-+ } else
-+ continue;
-+
-+ if (!err)
-+ ch->dma.irq = irq;
-+ }
-+
-+ return err;
-+}
-+
-+#ifdef SW_POLLING
-+static void xrx200_gmac_update(struct xrx200_port *port)
-+{
-+ u16 phyaddr = port->phydev->addr & MDIO_PHY_ADDR_MASK;
-+ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK;
-+ u16 miirate = 0;
-+
-+ switch (port->phydev->speed) {
-+ case SPEED_1000:
-+ phyaddr |= MDIO_PHY_SPEED_G1;
-+ miirate = MII_CFG_RATE_M125;
-+ break;
-+
-+ case SPEED_100:
-+ phyaddr |= MDIO_PHY_SPEED_M100;
-+ switch (miimode) {
-+ case MII_CFG_MODE_RMIIM:
-+ case MII_CFG_MODE_RMIIP:
-+ miirate = MII_CFG_RATE_M50;
-+ break;
-+ default:
-+ miirate = MII_CFG_RATE_M25;
-+ break;
-+ }
-+ break;
-+
-+ default:
-+ phyaddr |= MDIO_PHY_SPEED_M10;
-+ miirate = MII_CFG_RATE_M2P5;
-+ break;
-+ }
-+
-+ if (port->phydev->link)
-+ phyaddr |= MDIO_PHY_LINK_UP;
-+ else
-+ phyaddr |= MDIO_PHY_LINK_DOWN;
-+
-+ if (port->phydev->duplex == DUPLEX_FULL)
-+ phyaddr |= MDIO_PHY_FDUP_EN;
-+ else
-+ phyaddr |= MDIO_PHY_FDUP_DIS;
-+
-+ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num));
-+ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num));
-+ udelay(1);
-+}
-+#else
-+static void xrx200_gmac_update(struct xrx200_port *port)
-+{
-+
-+}
-+#endif
-+
-+static void xrx200_mdio_link(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+
-+ for (i = 0; i < priv->num_port; i++) {
-+ if (!priv->port[i].phydev)
-+ continue;
-+
-+ if (priv->port[i].link != priv->port[i].phydev->link) {
-+ xrx200_gmac_update(&priv->port[i]);
-+ priv->port[i].link = priv->port[i].phydev->link;
-+ netdev_info(dev, "port %d %s link\n",
-+ priv->port[i].num,
-+ (priv->port[i].link)?("got"):("lost"));
-+ }
-+ }
-+}
-+
-+static inline int xrx200_mdio_poll(struct mii_bus *bus)
-+{
-+ unsigned cnt = 10000;
-+
-+ while (likely(cnt--)) {
-+ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL);
-+ if ((ctrl & MDIO_BUSY) == 0)
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+
-+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val)
-+{
-+ if (xrx200_mdio_poll(bus))
-+ return 1;
-+
-+ ltq_mdio_w32(val, MDIO_WRITE);
-+ ltq_mdio_w32(MDIO_BUSY | MDIO_WR |
-+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
-+ (reg & MDIO_MASK),
-+ MDIO_CTRL);
-+
-+ return 0;
-+}
-+
-+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg)
-+{
-+ if (xrx200_mdio_poll(bus))
-+ return -1;
-+
-+ ltq_mdio_w32(MDIO_BUSY | MDIO_RD |
-+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
-+ (reg & MDIO_MASK),
-+ MDIO_CTRL);
-+
-+ if (xrx200_mdio_poll(bus))
-+ return -1;
-+
-+ return ltq_mdio_r32(MDIO_READ);
-+}
-+
-+static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct phy_device *phydev = NULL;
-+ unsigned val;
-+
-+ phydev = priv->hw->mii_bus->phy_map[port->phy_addr];
-+
-+ if (!phydev) {
-+ netdev_err(dev, "no PHY found\n");
-+ return -ENODEV;
-+ }
-+
-+ phydev = phy_connect(dev, dev_name(&phydev->dev), &xrx200_mdio_link,
-+ port->phy_if);
-+
-+ if (IS_ERR(phydev)) {
-+ netdev_err(dev, "Could not attach to PHY\n");
-+ return PTR_ERR(phydev);
-+ }
-+
-+ phydev->supported &= (SUPPORTED_10baseT_Half
-+ | SUPPORTED_10baseT_Full
-+ | SUPPORTED_100baseT_Half
-+ | SUPPORTED_100baseT_Full
-+ | SUPPORTED_1000baseT_Half
-+ | SUPPORTED_1000baseT_Full
-+ | SUPPORTED_Autoneg
-+ | SUPPORTED_MII
-+ | SUPPORTED_TP);
-+ phydev->advertising = phydev->supported;
-+ port->phydev = phydev;
-+
-+ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
-+ dev->name, phydev->drv->name,
-+ dev_name(&phydev->dev), phydev->irq);
-+
-+#ifdef SW_POLLING
-+ phy_read_status(phydev);
-+
-+ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
-+ val |= ADVERTIZE_MPD;
-+ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
-+ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040);
-+
-+ phy_start_aneg(phydev);
-+#endif
-+ return 0;
-+}
-+
-+static void xrx200_port_config(struct xrx200_priv *priv,
-+ const struct xrx200_port *port)
-+{
-+ u16 miimode = 0;
-+
-+ switch (port->num) {
-+ case 0: /* xMII0 */
-+ case 1: /* xMII1 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ if (port->flags & XRX200_PORT_TYPE_PHY)
-+ /* MII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ else
-+ /* MII PHY mode, connected to external MAC */
-+ miimode = MII_CFG_MODE_MIIP;
-+ break;
-+ case PHY_INTERFACE_MODE_RMII:
-+ if (port->flags & XRX200_PORT_TYPE_PHY)
-+ /* RMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RMIIM;
-+ else
-+ /* RMII PHY mode, connected to external MAC */
-+ miimode = MII_CFG_MODE_RMIIP;
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII:
-+ /* RGMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RGMII;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case 2: /* internal GPHY0 */
-+ case 3: /* internal GPHY0 */
-+ case 4: /* internal GPHY1 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ case PHY_INTERFACE_MODE_GMII:
-+ /* MII MAC mode, connected to internal GPHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case 5: /* internal GPHY1 or xMII2 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ /* MII MAC mode, connected to internal GPHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII:
-+ /* RGMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RGMII;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN,
-+ MII_CFG(port->num));
-+}
-+
-+static int xrx200_init(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct sockaddr mac;
-+ int err, i;
-+
-+#ifndef SW_POLLING
-+ unsigned int reg = 0;
-+
-+ /* enable auto polling */
-+ for (i = 0; i < priv->num_port; i++)
-+ reg |= BIT(priv->port[i].num);
-+ ltq_mdio_w32(reg, MDIO_CLK_CFG0);
-+ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1);
-+#endif
-+
-+ /* setup each port */
-+ for (i = 0; i < priv->num_port; i++)
-+ xrx200_port_config(priv, &priv->port[i]);
-+
-+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
-+ if (!is_valid_ether_addr(mac.sa_data)) {
-+ pr_warn("net-xrx200: invalid MAC, using random\n");
-+ eth_random_addr(mac.sa_data);
-+ dev->addr_assign_type |= NET_ADDR_RANDOM;
-+ }
-+
-+ err = eth_mac_addr(dev, &mac);
-+ if (err)
-+ goto err_netdev;
-+
-+ for (i = 0; i < priv->num_port; i++)
-+ if (xrx200_mdio_probe(dev, &priv->port[i]))
-+ pr_warn("xrx200-mdio: probing phy of port %d failed\n",
-+ priv->port[i].num);
-+
-+ return 0;
-+
-+err_netdev:
-+ unregister_netdev(dev);
-+ free_netdev(dev);
-+ return err;
-+}
-+
-+static void xrx200_pci_microcode(void)
-+{
-+ int i;
-+
-+ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK,
-+ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL);
-+ ltq_switch_w32(0, PCE_TBL_MASK);
-+
-+ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) {
-+ ltq_switch_w32(i, PCE_TBL_ADDR);
-+ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0));
-+ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1));
-+ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2));
-+ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3));
-+
-+ // start the table access:
-+ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL);
-+ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY);
-+ }
-+
-+ /* tell the switch that the microcode is loaded */
-+ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0));
-+}
-+
-+static void xrx200_hw_init(struct xrx200_hw *hw)
-+{
-+ int i;
-+
-+ /* enable clock gate */
-+ clk_enable(hw->clk);
-+
-+ ltq_switch_w32(1, 0);
-+ mdelay(100);
-+ ltq_switch_w32(0, 0);
-+ /*
-+ * TODO: we should really disbale all phys/miis here and explicitly
-+ * enable them in the device secific init function
-+ */
-+
-+ /* disable port fetch/store dma */
-+ for (i = 0; i < 7; i++ ) {
-+ ltq_switch_w32(0, FDMA_PCTRLx(i));
-+ ltq_switch_w32(0, SDMA_PCTRLx(i));
-+ }
-+
-+ /* enable Switch */
-+ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB);
-+
-+ /* load the pce microcode */
-+ xrx200_pci_microcode();
-+
-+ /* Default unknown Broadcat/Multicast/Unicast port maps */
-+ ltq_switch_w32(0x7f, PCE_PMAP1);
-+ ltq_switch_w32(0x7f, PCE_PMAP2);
-+ ltq_switch_w32(0x7f, PCE_PMAP3);
-+
-+ /* RMON Counter Enable for all physical ports */
-+ for (i = 0; i < 7; i++)
-+ ltq_switch_w32(0x1, BM_PCFG(i));
-+
-+ /* disable auto polling */
-+ ltq_mdio_w32(0x0, MDIO_CLK_CFG0);
-+
-+ /* enable port statistic counters */
-+ for (i = 0; i < 7; i++)
-+ ltq_switch_w32(0x1, BM_PCFGx(i));
-+
-+ /* set IPG to 12 */
-+ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG);
-+
-+#ifdef SW_ROUTING
-+ /* enable status header, enable CRC */
-+ ltq_pmac_w32_mask(0,
-+ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC,
-+ PMAC_HD_CTL);
-+#else
-+ /* disable status header, enable CRC */
-+ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS,
-+ PMAC_HD_CTL_AC,
-+ PMAC_HD_CTL);
-+#endif
-+
-+ /* enable port fetch/store dma & VLAN Modification */
-+ for (i = 0; i < 7; i++ ) {
-+ ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i));
-+ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i));
-+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0));
-+ }
-+
-+ /* enable special tag insertion on cpu port */
-+ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6));
-+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0));
-+ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2));
-+ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG);
-+}
-+
-+static void xrx200_hw_cleanup(struct xrx200_hw *hw)
-+{
-+ int i;
-+
-+ /* disable the switch */
-+ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB);
-+
-+ /* free the channels and IRQs */
-+ for (i = 0; i < 2; i++) {
-+ ltq_dma_free(&hw->chan[i].dma);
-+ if (hw->chan[i].dma.irq)
-+ free_irq(hw->chan[i].dma.irq, hw);
-+ }
-+
-+ /* free the allocated RX ring */
-+ for (i = 0; i < LTQ_DESC_NUM; i++)
-+ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]);
-+
-+ /* clear the mdio bus */
-+ mdiobus_unregister(hw->mii_bus);
-+ mdiobus_free(hw->mii_bus);
-+
-+ /* release the clock */
-+ clk_disable(hw->clk);
-+ clk_put(hw->clk);
-+}
-+
-+static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np)
-+{
-+ hw->mii_bus = mdiobus_alloc();
-+ if (!hw->mii_bus)
-+ return -ENOMEM;
-+
-+ hw->mii_bus->read = xrx200_mdio_rd;
-+ hw->mii_bus->write = xrx200_mdio_wr;
-+ hw->mii_bus->name = "lantiq,xrx200-mdio";
-+ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
-+
-+ if (of_mdiobus_register(hw->mii_bus, np)) {
-+ mdiobus_free(hw->mii_bus);
-+ return -ENXIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port)
-+{
-+ const __be32 *addr, *id = of_get_property(port, "reg", NULL);
-+ struct xrx200_port *p = &priv->port[priv->num_port];
-+
-+ if (!id)
-+ return;
-+
-+ memset(p, 0, sizeof(struct xrx200_port));
-+ p->phy_node = of_parse_phandle(port, "phy-handle", 0);
-+ addr = of_get_property(p->phy_node, "reg", NULL);
-+ if (!addr)
-+ return;
-+
-+ p->num = *id;
-+ p->phy_addr = *addr;
-+ p->phy_if = of_get_phy_mode(port);
-+ if (p->phy_addr > 0x10)
-+ p->flags = XRX200_PORT_TYPE_MAC;
-+ else
-+ p->flags = XRX200_PORT_TYPE_PHY;
-+ priv->num_port++;
-+
-+ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags);
-+ if (gpio_is_valid(p->gpio))
-+ if (!gpio_request(p->gpio, "phy-reset")) {
-+ gpio_direction_output(p->gpio,
-+ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0));
-+ udelay(100);
-+ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
-+ }
-+ /* is this port a wan port ? */
-+ if (priv->wan)
-+ priv->hw->wan_map |= BIT(p->num);
-+
-+ priv->port_map |= BIT(p->num);
-+
-+ /* store the port id in the hw struct so we can map ports -> devices */
-+ priv->hw->port_map[p->num] = priv->hw->num_devs;
-+}
-+
-+static const struct net_device_ops xrx200_netdev_ops = {
-+ .ndo_init = xrx200_init,
-+ .ndo_open = xrx200_open,
-+ .ndo_stop = xrx200_close,
-+ .ndo_start_xmit = xrx200_start_xmit,
-+ .ndo_set_mac_address = eth_mac_addr,
-+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_change_mtu = eth_change_mtu,
-+ .ndo_get_stats = xrx200_get_stats,
-+ .ndo_tx_timeout = xrx200_tx_timeout,
-+};
-+
-+static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface)
-+{
-+ struct xrx200_priv *priv;
-+ struct device_node *port;
-+ const __be32 *wan;
-+ const __be32 *sw;
-+
-+ /* alloc the network device */
-+ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv));
-+ if (!hw->devs[hw->num_devs])
-+ return;
-+
-+ /* setup the network device */
-+ strcpy(hw->devs[hw->num_devs]->name, "eth%d");
-+ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops;
-+ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT;
-+ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM;
-+
-+ /* setup our private data */
-+ priv = netdev_priv(hw->devs[hw->num_devs]);
-+ priv->hw = hw;
-+ of_get_mac_address_mtd(iface, priv->mac);
-+ priv->id = hw->num_devs;
-+
-+ /* is this the wan interface ? */
-+ wan = of_get_property(iface, "lantiq,wan", NULL);
-+ if (wan && (*wan == 1))
-+ priv->wan = 1;
-+
-+ /* should the switch be enabled on this interface ? */
-+ sw = of_get_property(iface, "lantiq,switch", NULL);
-+ if (sw && (*sw == 1))
-+ priv->sw = 1;
-+
-+ /* load the ports that are part of the interface */
-+ for_each_child_of_node(iface, port)
-+ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port"))
-+ xrx200_of_port(priv, port);
-+
-+ /* register the actual device */
-+ if (!register_netdev(hw->devs[hw->num_devs]))
-+ hw->num_devs++;
-+}
-+
-+static struct xrx200_hw xrx200_hw;
-+
-+static int xrx200_probe(struct platform_device *pdev)
-+{
-+ struct resource *res[4];
-+ struct device_node *mdio_np, *iface_np;
-+ int i;
-+
-+ /* load the memory ranges */
-+ for (i = 0; i < 4; i++) {
-+ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ if (!res[i]) {
-+ dev_err(&pdev->dev, "failed to get resources\n");
-+ return -ENOENT;
-+ }
-+ }
-+ xrx200_switch_membase = devm_request_and_ioremap(&pdev->dev, res[0]);
-+ xrx200_mdio_membase = devm_request_and_ioremap(&pdev->dev, res[1]);
-+ xrx200_mii_membase = devm_request_and_ioremap(&pdev->dev, res[2]);
-+ xrx200_pmac_membase = devm_request_and_ioremap(&pdev->dev, res[3]);
-+ if (!xrx200_switch_membase || !xrx200_mdio_membase ||
-+ !xrx200_mii_membase || !xrx200_pmac_membase) {
-+ dev_err(&pdev->dev, "failed to request and remap io ranges \n");
-+ return -ENOMEM;
-+ }
-+
-+ /* get the clock */
-+ xrx200_hw.clk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(xrx200_hw.clk)) {
-+ dev_err(&pdev->dev, "failed to get clock\n");
-+ return PTR_ERR(xrx200_hw.clk);
-+ }
-+
-+ /* bring up the dma engine and IP core */
-+ spin_lock_init(&xrx200_hw.lock);
-+ xrx200_dma_init(&xrx200_hw);
-+ xrx200_hw_init(&xrx200_hw);
-+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw);
-+
-+ /* bring up the mdio bus */
-+ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL,
-+ "lantiq,xrx200-mdio");
-+ if (mdio_np)
-+ if (xrx200_of_mdio(&xrx200_hw, mdio_np))
-+ dev_err(&pdev->dev, "mdio probe failed\n");
-+
-+ /* load the interfaces */
-+ for_each_child_of_node(pdev->dev.of_node, iface_np)
-+ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) {
-+ if (xrx200_hw.num_devs < XRX200_MAX_DEV)
-+ xrx200_of_iface(&xrx200_hw, iface_np);
-+ else
-+ dev_err(&pdev->dev,
-+ "only %d interfaces allowed\n",
-+ XRX200_MAX_DEV);
-+ }
-+
-+ if (!xrx200_hw.num_devs) {
-+ xrx200_hw_cleanup(&xrx200_hw);
-+ dev_err(&pdev->dev, "failed to load interfaces\n");
-+ return -ENOENT;
-+ }
-+
-+ xrx200sw_init(&xrx200_hw);
-+
-+ /* set wan port mask */
-+ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN);
-+
-+ for (i = 0; i < xrx200_hw.num_devs; i++) {
-+ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i];
-+ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i];
-+ }
-+
-+ /* setup NAPI */
-+ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev);
-+ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev,
-+ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32);
-+
-+ platform_set_drvdata(pdev, &xrx200_hw);
-+
-+ return 0;
-+}
-+
-+static int xrx200_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct xrx200_priv *priv;
-+
-+ if (!dev)
-+ return 0;
-+
-+ priv = netdev_priv(dev);
-+
-+ /* free stack related instances */
-+ netif_stop_queue(dev);
-+ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi);
-+
-+ /* shut down hardware */
-+ xrx200_hw_cleanup(&xrx200_hw);
-+
-+ /* remove the actual device */
-+ unregister_netdev(dev);
-+ free_netdev(dev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id xrx200_match[] = {
-+ { .compatible = "lantiq,xrx200-net" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, xrx200_match);
-+
-+static struct platform_driver xrx200_driver = {
-+ .probe = xrx200_probe,
-+ .remove = xrx200_remove,
-+ .driver = {
-+ .name = "lantiq,xrx200-net",
-+ .of_match_table = xrx200_match,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+module_platform_driver(xrx200_driver);
-+
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/net/ethernet/lantiq_xrx200_sw.h b/drivers/net/ethernet/lantiq_xrx200_sw.h
-new file mode 100644
-index 0000000..e7188a2
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_xrx200_sw.h
-@@ -0,0 +1,1328 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2013 Antonios Vamporakis <vamporakis@yahoo.com>
-+ *
-+ * VR9 switch registers extracted from 310TUJ0 switch api
-+ * WARNING mult values of 0x00 may not be correct
-+ *
-+ */
-+
-+enum {
-+// XRX200_ETHSW_SWRES, /* Ethernet Switch ResetControl Register */
-+// XRX200_ETHSW_SWRES_R1, /* Hardware Reset */
-+// XRX200_ETHSW_SWRES_R0, /* Register Configuration */
-+// XRX200_ETHSW_CLK_MAC_GAT, /* Ethernet Switch Clock ControlRegister */
-+// XRX200_ETHSW_CLK_EXP_SLEEP, /* Exponent to put system into sleep */
-+// XRX200_ETHSW_CLK_EXP_WAKE, /* Exponent to wake up system */
-+// XRX200_ETHSW_CLK_CLK2_EN, /* CLK2 Input for MAC */
-+// XRX200_ETHSW_CLK_EXT_DIV_EN, /* External Clock Divider Enable */
-+// XRX200_ETHSW_CLK_RAM_DBG_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_CLK_REG_GAT_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_CLK_GAT_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_CLK_MAC_GAT_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_DBG_STEP, /* Ethernet Switch Debug ControlRegister */
-+// XRX200_ETHSW_DBG_CLK_SEL, /* Trigger Enable */
-+// XRX200_ETHSW_DBG_MON_EN, /* Monitoring Enable */
-+// XRX200_ETHSW_DBG_TRIG_EN, /* Trigger Enable */
-+// XRX200_ETHSW_DBG_MODE, /* Debug Mode */
-+// XRX200_ETHSW_DBG_STEP_TIME, /* Clock Step Size */
-+// XRX200_ETHSW_SSB_MODE, /* Ethernet Switch SharedSegment Buffer Mode Register */
-+// XRX200_ETHSW_SSB_MODE_ADDE, /* Memory Address */
-+// XRX200_ETHSW_SSB_MODE_MODE, /* Memory Access Mode */
-+// XRX200_ETHSW_SSB_ADDR, /* Ethernet Switch SharedSegment Buffer Address Register */
-+// XRX200_ETHSW_SSB_ADDR_ADDE, /* Memory Address */
-+// XRX200_ETHSW_SSB_DATA, /* Ethernet Switch SharedSegment Buffer Data Register */
-+// XRX200_ETHSW_SSB_DATA_DATA, /* Data Value */
-+// XRX200_ETHSW_CAP_0, /* Ethernet Switch CapabilityRegister 0 */
-+// XRX200_ETHSW_CAP_0_SPEED, /* Clock frequency */
-+// XRX200_ETHSW_CAP_1, /* Ethernet Switch CapabilityRegister 1 */
-+// XRX200_ETHSW_CAP_1_GMAC, /* MAC operation mode */
-+// XRX200_ETHSW_CAP_1_QUEUE, /* Number of queues */
-+// XRX200_ETHSW_CAP_1_VPORTS, /* Number of virtual ports */
-+// XRX200_ETHSW_CAP_1_PPORTS, /* Number of physical ports */
-+// XRX200_ETHSW_CAP_2, /* Ethernet Switch CapabilityRegister 2 */
-+// XRX200_ETHSW_CAP_2_PACKETS, /* Number of packets */
-+// XRX200_ETHSW_CAP_3, /* Ethernet Switch CapabilityRegister 3 */
-+// XRX200_ETHSW_CAP_3_METERS, /* Number of traffic meters */
-+// XRX200_ETHSW_CAP_3_SHAPERS, /* Number of traffic shapers */
-+// XRX200_ETHSW_CAP_4, /* Ethernet Switch CapabilityRegister 4 */
-+// XRX200_ETHSW_CAP_4_PPPOE, /* PPPoE table size */
-+// XRX200_ETHSW_CAP_4_VLAN, /* Active VLAN table size */
-+// XRX200_ETHSW_CAP_5, /* Ethernet Switch CapabilityRegister 5 */
-+// XRX200_ETHSW_CAP_5_IPPLEN, /* IP packet length table size */
-+// XRX200_ETHSW_CAP_5_PROT, /* Protocol table size */
-+// XRX200_ETHSW_CAP_6, /* Ethernet Switch CapabilityRegister 6 */
-+// XRX200_ETHSW_CAP_6_MACDASA, /* MAC DA/SA table size */
-+// XRX200_ETHSW_CAP_6_APPL, /* Application table size */
-+// XRX200_ETHSW_CAP_7, /* Ethernet Switch CapabilityRegister 7 */
-+// XRX200_ETHSW_CAP_7_IPDASAM, /* IP DA/SA MSB table size */
-+// XRX200_ETHSW_CAP_7_IPDASAL, /* IP DA/SA LSB table size */
-+// XRX200_ETHSW_CAP_8, /* Ethernet Switch CapabilityRegister 8 */
-+// XRX200_ETHSW_CAP_8_MCAST, /* Multicast table size */
-+// XRX200_ETHSW_CAP_9, /* Ethernet Switch CapabilityRegister 9 */
-+// XRX200_ETHSW_CAP_9_FLAGG, /* Flow Aggregation table size */
-+// XRX200_ETHSW_CAP_10, /* Ethernet Switch CapabilityRegister 10 */
-+// XRX200_ETHSW_CAP_10_MACBT, /* MAC bridging table size */
-+// XRX200_ETHSW_CAP_11, /* Ethernet Switch CapabilityRegister 11 */
-+// XRX200_ETHSW_CAP_11_BSIZEL, /* Packet buffer size (lower part, in byte) */
-+// XRX200_ETHSW_CAP_12, /* Ethernet Switch CapabilityRegister 12 */
-+// XRX200_ETHSW_CAP_12_BSIZEH, /* Packet buffer size (higher part, in byte) */
-+// XRX200_ETHSW_VERSION_REV, /* Ethernet Switch VersionRegister */
-+// XRX200_ETHSW_VERSION_MOD_ID, /* Module Identification */
-+// XRX200_ETHSW_VERSION_REV_ID, /* Hardware Revision Identification */
-+// XRX200_ETHSW_IER, /* Interrupt Enable Register */
-+// XRX200_ETHSW_IER_FDMAIE, /* Fetch DMA Interrupt Enable */
-+// XRX200_ETHSW_IER_SDMAIE, /* Store DMA Interrupt Enable */
-+// XRX200_ETHSW_IER_MACIE, /* Ethernet MAC Interrupt Enable */
-+// XRX200_ETHSW_IER_PCEIE, /* Parser and Classification Engine Interrupt Enable */
-+// XRX200_ETHSW_IER_BMIE, /* Buffer Manager Interrupt Enable */
-+// XRX200_ETHSW_ISR, /* Interrupt Status Register */
-+// XRX200_ETHSW_ISR_FDMAINT, /* Fetch DMA Interrupt */
-+// XRX200_ETHSW_ISR_SDMAINT, /* Store DMA Interrupt */
-+// XRX200_ETHSW_ISR_MACINT, /* Ethernet MAC Interrupt */
-+// XRX200_ETHSW_ISR_PCEINT, /* Parser and Classification Engine Interrupt */
-+// XRX200_ETHSW_ISR_BMINT, /* Buffer Manager Interrupt */
-+// XRX200_ETHSW_SPARE_0, /* Ethernet Switch SpareCells 0 */
-+// XRX200_ETHSW_SPARE_0_SPARE, /* SPARE0 */
-+// XRX200_ETHSW_SPARE_1, /* Ethernet Switch SpareCells 1 */
-+// XRX200_ETHSW_SPARE_1_SPARE, /* SPARE1 */
-+// XRX200_ETHSW_SPARE_2, /* Ethernet Switch SpareCells 2 */
-+// XRX200_ETHSW_SPARE_2_SPARE, /* SPARE2 */
-+// XRX200_ETHSW_SPARE_3, /* Ethernet Switch SpareCells 3 */
-+// XRX200_ETHSW_SPARE_3_SPARE, /* SPARE3 */
-+// XRX200_ETHSW_SPARE_4, /* Ethernet Switch SpareCells 4 */
-+// XRX200_ETHSW_SPARE_4_SPARE, /* SPARE4 */
-+// XRX200_ETHSW_SPARE_5, /* Ethernet Switch SpareCells 5 */
-+// XRX200_ETHSW_SPARE_5_SPARE, /* SPARE5 */
-+// XRX200_ETHSW_SPARE_6, /* Ethernet Switch SpareCells 6 */
-+// XRX200_ETHSW_SPARE_6_SPARE, /* SPARE6 */
-+// XRX200_ETHSW_SPARE_7, /* Ethernet Switch SpareCells 7 */
-+// XRX200_ETHSW_SPARE_7_SPARE, /* SPARE7 */
-+// XRX200_ETHSW_SPARE_8, /* Ethernet Switch SpareCells 8 */
-+// XRX200_ETHSW_SPARE_8_SPARE, /* SPARE8 */
-+// XRX200_ETHSW_SPARE_9, /* Ethernet Switch SpareCells 9 */
-+// XRX200_ETHSW_SPARE_9_SPARE, /* SPARE9 */
-+// XRX200_ETHSW_SPARE_10, /* Ethernet Switch SpareCells 10 */
-+// XRX200_ETHSW_SPARE_10_SPARE, /* SPARE10 */
-+// XRX200_ETHSW_SPARE_11, /* Ethernet Switch SpareCells 11 */
-+// XRX200_ETHSW_SPARE_11_SPARE, /* SPARE11 */
-+// XRX200_ETHSW_SPARE_12, /* Ethernet Switch SpareCells 12 */
-+// XRX200_ETHSW_SPARE_12_SPARE, /* SPARE12 */
-+// XRX200_ETHSW_SPARE_13, /* Ethernet Switch SpareCells 13 */
-+// XRX200_ETHSW_SPARE_13_SPARE, /* SPARE13 */
-+// XRX200_ETHSW_SPARE_14, /* Ethernet Switch SpareCells 14 */
-+// XRX200_ETHSW_SPARE_14_SPARE, /* SPARE14 */
-+// XRX200_ETHSW_SPARE_15, /* Ethernet Switch SpareCells 15 */
-+// XRX200_ETHSW_SPARE_15_SPARE, /* SPARE15 */
-+// XRX200_BM_RAM_VAL_3, /* RAM Value Register 3 */
-+// XRX200_BM_RAM_VAL_3_VAL3, /* Data value [15:0] */
-+// XRX200_BM_RAM_VAL_2, /* RAM Value Register 2 */
-+// XRX200_BM_RAM_VAL_2_VAL2, /* Data value [15:0] */
-+// XRX200_BM_RAM_VAL_1, /* RAM Value Register 1 */
-+// XRX200_BM_RAM_VAL_1_VAL1, /* Data value [15:0] */
-+// XRX200_BM_RAM_VAL_0, /* RAM Value Register 0 */
-+// XRX200_BM_RAM_VAL_0_VAL0, /* Data value [15:0] */
-+// XRX200_BM_RAM_ADDR, /* RAM Address Register */
-+// XRX200_BM_RAM_ADDR_ADDR, /* RAM Address */
-+// XRX200_BM_RAM_CTRL, /* RAM Access Control Register */
-+// XRX200_BM_RAM_CTRL_BAS, /* Access Busy/Access Start */
-+// XRX200_BM_RAM_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
-+// XRX200_BM_RAM_CTRL_ADDR, /* Address for RAM selection */
-+// XRX200_BM_FSQM_GCTRL, /* Free Segment Queue ManagerGlobal Control Register */
-+// XRX200_BM_FSQM_GCTRL_SEGNUM, /* Maximum Segment Number */
-+// XRX200_BM_CONS_SEG, /* Number of Consumed SegmentsRegister */
-+// XRX200_BM_CONS_SEG_FSEG, /* Number of Consumed Segments */
-+// XRX200_BM_CONS_PKT, /* Number of Consumed PacketPointers Register */
-+// XRX200_BM_CONS_PKT_FQP, /* Number of Consumed Packet Pointers */
-+// XRX200_BM_GCTRL_F, /* Buffer Manager Global ControlRegister 0 */
-+// XRX200_BM_GCTRL_BM_STA, /* Buffer Manager Initialization Status Bit */
-+// XRX200_BM_GCTRL_SAT, /* RMON Counter Update Mode */
-+// XRX200_BM_GCTRL_FR_RBC, /* Freeze RMON RX Bad Byte 64 Bit Counter */
-+// XRX200_BM_GCTRL_FR_RGC, /* Freeze RMON RX Good Byte 64 Bit Counter */
-+// XRX200_BM_GCTRL_FR_TGC, /* Freeze RMON TX Good Byte 64 Bit Counter */
-+// XRX200_BM_GCTRL_I_FIN, /* RAM initialization finished */
-+// XRX200_BM_GCTRL_CX_INI, /* PQM Context RAM initialization */
-+// XRX200_BM_GCTRL_FP_INI, /* FPQM RAM initialization */
-+// XRX200_BM_GCTRL_FS_INI, /* FSQM RAM initialization */
-+// XRX200_BM_GCTRL_R_SRES, /* Software Reset for RMON */
-+// XRX200_BM_GCTRL_S_SRES, /* Software Reset for Scheduler */
-+// XRX200_BM_GCTRL_A_SRES, /* Software Reset for AVG */
-+// XRX200_BM_GCTRL_P_SRES, /* Software Reset for PQM */
-+// XRX200_BM_GCTRL_F_SRES, /* Software Reset for FSQM */
-+// XRX200_BM_QUEUE_GCTRL, /* Queue Manager GlobalControl Register 0 */
-+// XRX200_BM_QUEUE_GCTRL_GL_MOD, /* WRED Mode Signal */
-+// XRX200_BM_QUEUE_GCTRL_AQUI, /* Average Queue Update Interval */
-+// XRX200_BM_QUEUE_GCTRL_AQWF, /* Average Queue Weight Factor */
-+// XRX200_BM_QUEUE_GCTRL_QAVGEN, /* Queue Average Calculation Enable */
-+// XRX200_BM_QUEUE_GCTRL_DPROB, /* Drop Probability Profile */
-+// XRX200_BM_WRED_RTH_0, /* WRED Red Threshold Register0 */
-+// XRX200_BM_WRED_RTH_0_MINTH, /* Minimum Threshold */
-+// XRX200_BM_WRED_RTH_1, /* WRED Red Threshold Register1 */
-+// XRX200_BM_WRED_RTH_1_MAXTH, /* Maximum Threshold */
-+// XRX200_BM_WRED_YTH_0, /* WRED Yellow ThresholdRegister 0 */
-+// XRX200_BM_WRED_YTH_0_MINTH, /* Minimum Threshold */
-+// XRX200_BM_WRED_YTH_1, /* WRED Yellow ThresholdRegister 1 */
-+// XRX200_BM_WRED_YTH_1_MAXTH, /* Maximum Threshold */
-+// XRX200_BM_WRED_GTH_0, /* WRED Green ThresholdRegister 0 */
-+// XRX200_BM_WRED_GTH_0_MINTH, /* Minimum Threshold */
-+// XRX200_BM_WRED_GTH_1, /* WRED Green ThresholdRegister 1 */
-+// XRX200_BM_WRED_GTH_1_MAXTH, /* Maximum Threshold */
-+// XRX200_BM_DROP_GTH_0_THR, /* Drop Threshold ConfigurationRegister 0 */
-+// XRX200_BM_DROP_GTH_0_THR_FQ, /* Threshold for frames marked red */
-+// XRX200_BM_DROP_GTH_1_THY, /* Drop Threshold ConfigurationRegister 1 */
-+// XRX200_BM_DROP_GTH_1_THY_FQ, /* Threshold for frames marked yellow */
-+// XRX200_BM_DROP_GTH_2_THG, /* Drop Threshold ConfigurationRegister 2 */
-+// XRX200_BM_DROP_GTH_2_THG_FQ, /* Threshold for frames marked green */
-+// XRX200_BM_IER, /* Buffer Manager Global InterruptEnable Register */
-+// XRX200_BM_IER_CNT4, /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
-+// XRX200_BM_IER_CNT3, /* Counter Group 3 (RMON-PQM) Interrupt Enable */
-+// XRX200_BM_IER_CNT2, /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
-+// XRX200_BM_IER_CNT1, /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */
-+// XRX200_BM_IER_CNT0, /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */
-+// XRX200_BM_IER_DEQ, /* PQM dequeue Interrupt Enable */
-+// XRX200_BM_IER_ENQ, /* PQM Enqueue Interrupt Enable */
-+// XRX200_BM_IER_FSQM, /* Buffer Empty Interrupt Enable */
-+// XRX200_BM_ISR, /* Buffer Manager Global InterruptStatus Register */
-+// XRX200_BM_ISR_CNT4, /* Counter Group 4 Interrupt */
-+// XRX200_BM_ISR_CNT3, /* Counter Group 3 Interrupt */
-+// XRX200_BM_ISR_CNT2, /* Counter Group 2 Interrupt */
-+// XRX200_BM_ISR_CNT1, /* Counter Group 1 Interrupt */
-+// XRX200_BM_ISR_CNT0, /* Counter Group 0 Interrupt */
-+// XRX200_BM_ISR_DEQ, /* PQM dequeue Interrupt Enable */
-+// XRX200_BM_ISR_ENQ, /* PQM Enqueue Interrupt */
-+// XRX200_BM_ISR_FSQM, /* Buffer Empty Interrupt */
-+// XRX200_BM_CISEL, /* Buffer Manager RMON CounterInterrupt Select Register */
-+// XRX200_BM_CISEL_PORT, /* Port Number */
-+// XRX200_BM_DEBUG_CTRL_DBG, /* Debug Control Register */
-+// XRX200_BM_DEBUG_CTRL_DBG_SEL, /* Select Signal for Debug Multiplexer */
-+// XRX200_BM_DEBUG_VAL_DBG, /* Debug Value Register */
-+// XRX200_BM_DEBUG_VAL_DBG_DAT, /* Debug Data Value */
-+// XRX200_BM_PCFG, /* Buffer Manager PortConfiguration Register */
-+// XRX200_BM_PCFG_CNTEN, /* RMON Counter Enable */
-+// XRX200_BM_RMON_CTRL_RAM1, /* Buffer ManagerRMON Control Register */
-+// XRX200_BM_RMON_CTRL_RAM2_RES, /* Software Reset for RMON RAM2 */
-+// XRX200_BM_RMON_CTRL_RAM1_RES, /* Software Reset for RMON RAM1 */
-+// XRX200_PQM_DP, /* Packet Queue ManagerDrop Probability Register */
-+// XRX200_PQM_DP_DPROB, /* Drop Probability Profile */
-+// XRX200_PQM_RS, /* Packet Queue ManagerRate Shaper Assignment Register */
-+// XRX200_PQM_RS_EN2, /* Rate Shaper 2 Enable */
-+// XRX200_PQM_RS_RS2, /* Rate Shaper 2 */
-+// XRX200_PQM_RS_EN1, /* Rate Shaper 1 Enable */
-+// XRX200_PQM_RS_RS1, /* Rate Shaper 1 */
-+// XRX200_RS_CTRL, /* Rate Shaper ControlRegister */
-+// XRX200_RS_CTRL_RSEN, /* Rate Shaper Enable */
-+// XRX200_RS_CBS, /* Rate Shaper CommittedBurst Size Register */
-+// XRX200_RS_CBS_CBS, /* Committed Burst Size */
-+// XRX200_RS_IBS, /* Rate Shaper InstantaneousBurst Size Register */
-+// XRX200_RS_IBS_IBS, /* Instantaneous Burst Size */
-+// XRX200_RS_CIR_EXP, /* Rate Shaper RateExponent Register */
-+// XRX200_RS_CIR_EXP_EXP, /* Exponent */
-+// XRX200_RS_CIR_MANT, /* Rate Shaper RateMantissa Register */
-+// XRX200_RS_CIR_MANT_MANT, /* Mantissa */
-+ XRX200_PCE_TBL_KEY_7, /* Table Key Data 7 */
-+// XRX200_PCE_TBL_KEY_7_KEY7, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_6, /* Table Key Data 6 */
-+// XRX200_PCE_TBL_KEY_6_KEY6, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_5, /* Table Key Data 5 */
-+// XRX200_PCE_TBL_KEY_5_KEY5, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_4, /* Table Key Data 4 */
-+// XRX200_PCE_TBL_KEY_4_KEY4, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_3, /* Table Key Data 3 */
-+// XRX200_PCE_TBL_KEY_3_KEY3, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_2, /* Table Key Data 2 */
-+// XRX200_PCE_TBL_KEY_2_KEY2, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_1, /* Table Key Data 1 */
-+// XRX200_PCE_TBL_KEY_1_KEY1, /* Key Value[31:16] */
-+ XRX200_PCE_TBL_KEY_0, /* Table Key Data 0 */
-+// XRX200_PCE_TBL_KEY_0_KEY0, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_MASK_0, /* Table Mask Write Register0 */
-+// XRX200_PCE_TBL_MASK_0_MASK0, /* Mask Pattern [15:0] */
-+ XRX200_PCE_TBL_VAL_4, /* Table Value Register4 */
-+// XRX200_PCE_TBL_VAL_4_VAL4, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_3, /* Table Value Register3 */
-+// XRX200_PCE_TBL_VAL_3_VAL3, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_2, /* Table Value Register2 */
-+// XRX200_PCE_TBL_VAL_2_VAL2, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_1, /* Table Value Register1 */
-+// XRX200_PCE_TBL_VAL_1_VAL1, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_0, /* Table Value Register0 */
-+// XRX200_PCE_TBL_VAL_0_VAL0, /* Data value [15:0] */
-+// XRX200_PCE_TBL_ADDR, /* Table Entry AddressRegister */
-+ XRX200_PCE_TBL_ADDR_ADDR, /* Table Address */
-+// XRX200_PCE_TBL_CTRL, /* Table Access ControlRegister */
-+ XRX200_PCE_TBL_CTRL_BAS, /* Access Busy/Access Start */
-+ XRX200_PCE_TBL_CTRL_TYPE, /* Lookup Entry Type */
-+ XRX200_PCE_TBL_CTRL_VLD, /* Lookup Entry Valid */
-+ XRX200_PCE_TBL_CTRL_GMAP, /* Group Map */
-+ XRX200_PCE_TBL_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
-+ XRX200_PCE_TBL_CTRL_ADDR, /* Lookup Table Address */
-+// XRX200_PCE_TBL_STAT, /* Table General StatusRegister */
-+// XRX200_PCE_TBL_STAT_TBUSY, /* Table Access Busy */
-+// XRX200_PCE_TBL_STAT_TEMPT, /* Table Empty */
-+// XRX200_PCE_TBL_STAT_TFUL, /* Table Full */
-+// XRX200_PCE_AGE_0, /* Aging Counter ConfigurationRegister 0 */
-+// XRX200_PCE_AGE_0_EXP, /* Aging Counter Exponent Value */
-+// XRX200_PCE_AGE_1, /* Aging Counter ConfigurationRegister 1 */
-+// XRX200_PCE_AGE_1_MANT, /* Aging Counter Mantissa Value */
-+// XRX200_PCE_PMAP_1, /* Port Map Register 1 */
-+// XRX200_PCE_PMAP_1_MPMAP, /* Monitoring Port Map */
-+// XRX200_PCE_PMAP_2, /* Port Map Register 2 */
-+// XRX200_PCE_PMAP_2_DMCPMAP, /* Default Multicast Port Map */
-+// XRX200_PCE_PMAP_3, /* Port Map Register 3 */
-+// XRX200_PCE_PMAP_3_UUCMAP, /* Default Unknown Unicast Port Map */
-+// XRX200_PCE_GCTRL_0, /* PCE Global Control Register0 */
-+// XRX200_PCE_GCTRL_0_IGMP, /* IGMP Mode Selection */
-+ XRX200_PCE_GCTRL_0_VLAN, /* VLAN-aware Switching */
-+// XRX200_PCE_GCTRL_0_NOPM, /* No Port Map Forwarding */
-+// XRX200_PCE_GCTRL_0_SCONUC, /* Unknown Unicast Storm Control */
-+// XRX200_PCE_GCTRL_0_SCONMC, /* Multicast Storm Control */
-+// XRX200_PCE_GCTRL_0_SCONBC, /* Broadcast Storm Control */
-+// XRX200_PCE_GCTRL_0_SCONMOD, /* Storm Control Mode */
-+// XRX200_PCE_GCTRL_0_SCONMET, /* Storm Control Metering Instance */
-+// XRX200_PCE_GCTRL_0_MC_VALID, /* Access Request */
-+// XRX200_PCE_GCTRL_0_PLCKMOD, /* Port Lock Mode */
-+// XRX200_PCE_GCTRL_0_PLIMMOD, /* MAC Address Learning Limitation Mode */
-+// XRX200_PCE_GCTRL_0_MTFL, /* MAC Table Flushing */
-+// XRX200_PCE_GCTRL_1, /* PCE Global Control Register1 */
-+// XRX200_PCE_GCTRL_1_PCE_DIS, /* PCE Disable after currently processed packet */
-+// XRX200_PCE_GCTRL_1_LRNMOD, /* MAC Address Learning Mode */
-+// XRX200_PCE_TCM_GLOB_CTRL, /* Three-color MarkerGlobal Control Register */
-+// XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */
-+// XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */
-+// XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */
-+// XRX200_PCE_IGMP_CTRL, /* IGMP Control Register */
-+// XRX200_PCE_IGMP_CTRL_FAGEEN, /* Force Aging of Table Entries Enable */
-+// XRX200_PCE_IGMP_CTRL_FLEAVE, /* Fast Leave Enable */
-+// XRX200_PCE_IGMP_CTRL_DMRTEN, /* Default Maximum Response Time Enable */
-+// XRX200_PCE_IGMP_CTRL_JASUP, /* Join Aggregation Suppression Enable */
-+// XRX200_PCE_IGMP_CTRL_REPSUP, /* Report Suppression Enable */
-+// XRX200_PCE_IGMP_CTRL_SRPEN, /* Snooping of Router Port Enable */
-+// XRX200_PCE_IGMP_CTRL_ROB, /* Robustness Variable */
-+// XRX200_PCE_IGMP_CTRL_DMRT, /* IGMP Default Maximum Response Time */
-+// XRX200_PCE_IGMP_DRPM, /* IGMP Default RouterPort Map Register */
-+// XRX200_PCE_IGMP_DRPM_DRPM, /* IGMP Default Router Port Map */
-+// XRX200_PCE_IGMP_AGE_0, /* IGMP Aging Register0 */
-+// XRX200_PCE_IGMP_AGE_0_MANT, /* IGMP Group Aging Time Mantissa */
-+// XRX200_PCE_IGMP_AGE_0_EXP, /* IGMP Group Aging Time Exponent */
-+// XRX200_PCE_IGMP_AGE_1, /* IGMP Aging Register1 */
-+// XRX200_PCE_IGMP_AGE_1_MANT, /* IGMP Router Port Aging Time Mantissa */
-+// XRX200_PCE_IGMP_STAT, /* IGMP Status Register */
-+// XRX200_PCE_IGMP_STAT_IGPM, /* IGMP Port Map */
-+// XRX200_WOL_GLB_CTRL, /* Wake-on-LAN ControlRegister */
-+// XRX200_WOL_GLB_CTRL_PASSEN, /* WoL Password Enable */
-+// XRX200_WOL_DA_0, /* Wake-on-LAN DestinationAddress Register 0 */
-+// XRX200_WOL_DA_0_DA0, /* WoL Destination Address [15:0] */
-+// XRX200_WOL_DA_1, /* Wake-on-LAN DestinationAddress Register 1 */
-+// XRX200_WOL_DA_1_DA1, /* WoL Destination Address [31:16] */
-+// XRX200_WOL_DA_2, /* Wake-on-LAN DestinationAddress Register 2 */
-+// XRX200_WOL_DA_2_DA2, /* WoL Destination Address [47:32] */
-+// XRX200_WOL_PW_0, /* Wake-on-LAN Password Register0 */
-+// XRX200_WOL_PW_0_PW0, /* WoL Password [15:0] */
-+// XRX200_WOL_PW_1, /* Wake-on-LAN Password Register1 */
-+// XRX200_WOL_PW_1_PW1, /* WoL Password [31:16] */
-+// XRX200_WOL_PW_2, /* Wake-on-LAN Password Register2 */
-+// XRX200_WOL_PW_2_PW2, /* WoL Password [47:32] */
-+// XRX200_PCE_IER_0_PINT, /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */
-+// XRX200_PCE_IER_0_PINT_15, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_14, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_13, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_12, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_11, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_10, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_9, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_8, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_7, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_6, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_5, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_4, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_3, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_2, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_1, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_0, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_1, /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */
-+// XRX200_PCE_IER_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */
-+// XRX200_PCE_IER_1_CPH2, /* Classification Phase 2 Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_CPH1, /* Classification Phase 1 Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_CPH0, /* Classification Phase 0 Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_PRDY, /* Parser Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_IGTF, /* IGMP Table Full Interrupt Enable */
-+// XRX200_PCE_IER_1_MTF, /* MAC Table Full Interrupt Enable */
-+// XRX200_PCE_ISR_0_PINT, /* Parser and ClassificationEngine Global Interrupt Status Register 0 */
-+// XRX200_PCE_ISR_0_PINT_15, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_14, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_13, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_12, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_11, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_10, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_9, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_8, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_7, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_6, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_5, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_4, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_3, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_2, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_1, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_0, /* Port Interrupt */
-+// XRX200_PCE_ISR_1, /* Parser and ClassificationEngine Global Interrupt Status Register 1 */
-+// XRX200_PCE_ISR_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched */
-+// XRX200_PCE_ISR_1_CPH2, /* Classification Phase 2 Ready Interrupt */
-+// XRX200_PCE_ISR_1_CPH1, /* Classification Phase 1 Ready Interrupt */
-+// XRX200_PCE_ISR_1_CPH0, /* Classification Phase 0 Ready Interrupt */
-+// XRX200_PCE_ISR_1_PRDY, /* Parser Ready Interrupt */
-+// XRX200_PCE_ISR_1_IGTF, /* IGMP Table Full Interrupt */
-+// XRX200_PCE_ISR_1_MTF, /* MAC Table Full Interrupt */
-+// XRX200_PARSER_STAT_FIFO, /* Parser Status Register */
-+// XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */
-+// XRX200_PARSER_STAT_FSM_STATE, /* Parser FSM State */
-+// XRX200_PARSER_STAT_PKT_ERR, /* Packet error detected */
-+// XRX200_PARSER_STAT_FSM_FIN, /* Parser FSM finished */
-+// XRX200_PARSER_STAT_FSM_START, /* Parser FSM start */
-+// XRX200_PARSER_STAT_FIFO_RDY, /* Parser FIFO ready for read. */
-+// XRX200_PARSER_STAT_FIFO_FULL, /* Parser */
-+// XRX200_PCE_PCTRL_0, /* PCE Port ControlRegister 0 */
-+// XRX200_PCE_PCTRL_0_MCST, /* Multicast Forwarding Mode Selection */
-+// XRX200_PCE_PCTRL_0_EGSTEN, /* Table-based Egress Special Tag Enable */
-+// XRX200_PCE_PCTRL_0_IGSTEN, /* Ingress Special Tag Enable */
-+// XRX200_PCE_PCTRL_0_PCPEN, /* PCP Remarking Mode */
-+// XRX200_PCE_PCTRL_0_CLPEN, /* Class Remarking Mode */
-+// XRX200_PCE_PCTRL_0_DPEN, /* Drop Precedence Remarking Mode */
-+// XRX200_PCE_PCTRL_0_CMOD, /* Three-color Marker Color Mode */
-+// XRX200_PCE_PCTRL_0_VREP, /* VLAN Replacement Mode */
-+ XRX200_PCE_PCTRL_0_TVM, /* Transparent VLAN Mode */
-+// XRX200_PCE_PCTRL_0_PLOCK, /* Port Locking Enable */
-+// XRX200_PCE_PCTRL_0_AGEDIS, /* Aging Disable */
-+// XRX200_PCE_PCTRL_0_PSTATE, /* Port State */
-+// XRX200_PCE_PCTRL_1, /* PCE Port ControlRegister 1 */
-+// XRX200_PCE_PCTRL_1_LRNLIM, /* MAC Address Learning Limit */
-+// XRX200_PCE_PCTRL_2, /* PCE Port ControlRegister 2 */
-+// XRX200_PCE_PCTRL_2_DSCPMOD, /* DSCP Mode Selection */
-+// XRX200_PCE_PCTRL_2_DSCP, /* Enable DSCP to select the Class of Service */
-+// XRX200_PCE_PCTRL_2_PCP, /* Enable VLAN PCP to select the Class of Service */
-+// XRX200_PCE_PCTRL_2_PCLASS, /* Port-based Traffic Class */
-+// XRX200_PCE_PCTRL_3_VIO, /* PCE Port ControlRegister 3 */
-+// XRX200_PCE_PCTRL_3_EDIR, /* Egress Redirection Mode */
-+// XRX200_PCE_PCTRL_3_RXDMIR, /* Receive Mirroring Enable for dropped frames */
-+// XRX200_PCE_PCTRL_3_RXVMIR, /* Receive Mirroring Enable for valid frames */
-+// XRX200_PCE_PCTRL_3_TXMIR, /* Transmit Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_7, /* Violation Type 7 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_6, /* Violation Type 6 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_5, /* Violation Type 5 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_4, /* Violation Type 4 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_3, /* Violation Type 3 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_2, /* Violation Type 2 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_1, /* Violation Type 1 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_0, /* Violation Type 0 Mirroring Enable */
-+// XRX200_WOL_CTRL, /* Wake-on-LAN ControlRegister */
-+// XRX200_WOL_CTRL_PORT, /* WoL Enable */
-+// XRX200_PCE_VCTRL, /* PCE VLAN ControlRegister */
-+ XRX200_PCE_VCTRL_VSR, /* VLAN Security Rule */
-+ XRX200_PCE_VCTRL_VEMR, /* VLAN Egress Member Violation Rule */
-+ XRX200_PCE_VCTRL_VIMR, /* VLAN Ingress Member Violation Rule */
-+ XRX200_PCE_VCTRL_VINR, /* VLAN Ingress Tag Rule */
-+ XRX200_PCE_VCTRL_UVR, /* Unknown VLAN Rule */
-+// XRX200_PCE_DEFPVID, /* PCE Default PortVID Register */
-+ XRX200_PCE_DEFPVID_PVID, /* Default Port VID Index */
-+// XRX200_PCE_PSTAT, /* PCE Port StatusRegister */
-+// XRX200_PCE_PSTAT_LRNCNT, /* Learning Count */
-+// XRX200_PCE_PIER, /* Parser and ClassificationEngine Port Interrupt Enable Register */
-+// XRX200_PCE_PIER_CLDRP, /* Classification Drop Interrupt Enable */
-+// XRX200_PCE_PIER_PTDRP, /* Port Drop Interrupt Enable */
-+// XRX200_PCE_PIER_VLAN, /* VLAN Violation Interrupt Enable */
-+// XRX200_PCE_PIER_WOL, /* Wake-on-LAN Interrupt Enable */
-+// XRX200_PCE_PIER_LOCK, /* Port Limit Alert Interrupt Enable */
-+// XRX200_PCE_PIER_LIM, /* Port Lock Alert Interrupt Enable */
-+// XRX200_PCE_PISR, /* Parser and ClassificationEngine Port Interrupt Status Register */
-+// XRX200_PCE_PISR_CLDRP, /* Classification Drop Interrupt */
-+// XRX200_PCE_PISR_PTDRP, /* Port Drop Interrupt */
-+// XRX200_PCE_PISR_VLAN, /* VLAN Violation Interrupt */
-+// XRX200_PCE_PISR_WOL, /* Wake-on-LAN Interrupt */
-+// XRX200_PCE_PISR_LOCK, /* Port Lock Alert Interrupt */
-+// XRX200_PCE_PISR_LIMIT, /* Port Limitation Alert Interrupt */
-+// XRX200_PCE_TCM_CTRL, /* Three-colorMarker Control Register */
-+// XRX200_PCE_TCM_CTRL_TCMEN, /* Three-color Marker metering instance enable */
-+// XRX200_PCE_TCM_STAT, /* Three-colorMarker Status Register */
-+// XRX200_PCE_TCM_STAT_AL1, /* Three-color Marker Alert 1 Status */
-+// XRX200_PCE_TCM_STAT_AL0, /* Three-color Marker Alert 0 Status */
-+// XRX200_PCE_TCM_CBS, /* Three-color MarkerCommitted Burst Size Register */
-+// XRX200_PCE_TCM_CBS_CBS, /* Committed Burst Size */
-+// XRX200_PCE_TCM_EBS, /* Three-color MarkerExcess Burst Size Register */
-+// XRX200_PCE_TCM_EBS_EBS, /* Excess Burst Size */
-+// XRX200_PCE_TCM_IBS, /* Three-color MarkerInstantaneous Burst Size Register */
-+// XRX200_PCE_TCM_IBS_IBS, /* Instantaneous Burst Size */
-+// XRX200_PCE_TCM_CIR_MANT, /* Three-colorMarker Constant Information Rate Mantissa Register */
-+// XRX200_PCE_TCM_CIR_MANT_MANT, /* Rate Counter Mantissa */
-+// XRX200_PCE_TCM_CIR_EXP, /* Three-colorMarker Constant Information Rate Exponent Register */
-+// XRX200_PCE_TCM_CIR_EXP_EXP, /* Rate Counter Exponent */
-+// XRX200_MAC_TEST, /* MAC Test Register */
-+// XRX200_MAC_TEST_JTP, /* Jitter Test Pattern */
-+// XRX200_MAC_PFAD_CFG, /* MAC Pause FrameSource Address Configuration Register */
-+// XRX200_MAC_PFAD_CFG_SAMOD, /* Source Address Mode */
-+// XRX200_MAC_PFSA_0, /* Pause Frame SourceAddress Part 0 */
-+// XRX200_MAC_PFSA_0_PFAD, /* Pause Frame Source Address Part 0 */
-+// XRX200_MAC_PFSA_1, /* Pause Frame SourceAddress Part 1 */
-+// XRX200_MAC_PFSA_1_PFAD, /* Pause Frame Source Address Part 1 */
-+// XRX200_MAC_PFSA_2, /* Pause Frame SourceAddress Part 2 */
-+// XRX200_MAC_PFSA_2_PFAD, /* Pause Frame Source Address Part 2 */
-+// XRX200_MAC_FLEN, /* MAC Frame Length Register */
-+// XRX200_MAC_FLEN_LEN, /* Maximum Frame Length */
-+// XRX200_MAC_VLAN_ETYPE_0, /* MAC VLAN EthertypeRegister 0 */
-+// XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */
-+// XRX200_MAC_VLAN_ETYPE_1, /* MAC VLAN EthertypeRegister 1 */
-+// XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */
-+// XRX200_MAC_IER, /* MAC Interrupt EnableRegister */
-+// XRX200_MAC_IER_MACIEN, /* MAC Interrupt Enable */
-+// XRX200_MAC_ISR, /* MAC Interrupt StatusRegister */
-+// XRX200_MAC_ISR_MACINT, /* MAC Interrupt */
-+// XRX200_MAC_PSTAT, /* MAC Port Status Register */
-+// XRX200_MAC_PSTAT_PACT, /* PHY Active Status */
-+ XRX200_MAC_PSTAT_GBIT, /* Gigabit Speed Status */
-+ XRX200_MAC_PSTAT_MBIT, /* Megabit Speed Status */
-+ XRX200_MAC_PSTAT_FDUP, /* Full Duplex Status */
-+// XRX200_MAC_PSTAT_RXPAU, /* Receive Pause Status */
-+// XRX200_MAC_PSTAT_TXPAU, /* Transmit Pause Status */
-+// XRX200_MAC_PSTAT_RXPAUEN, /* Receive Pause Enable Status */
-+// XRX200_MAC_PSTAT_TXPAUEN, /* Transmit Pause Enable Status */
-+ XRX200_MAC_PSTAT_LSTAT, /* Link Status */
-+// XRX200_MAC_PSTAT_CRS, /* Carrier Sense Status */
-+// XRX200_MAC_PSTAT_TXLPI, /* Transmit Low-power Idle Status */
-+// XRX200_MAC_PSTAT_RXLPI, /* Receive Low-power Idle Status */
-+// XRX200_MAC_PISR, /* MAC Interrupt Status Register */
-+// XRX200_MAC_PISR_PACT, /* PHY Active Status */
-+// XRX200_MAC_PISR_SPEED, /* Megabit Speed Status */
-+// XRX200_MAC_PISR_FDUP, /* Full Duplex Status */
-+// XRX200_MAC_PISR_RXPAUEN, /* Receive Pause Enable Status */
-+// XRX200_MAC_PISR_TXPAUEN, /* Transmit Pause Enable Status */
-+// XRX200_MAC_PISR_LPIOFF, /* Receive Low-power Idle Mode is left */
-+// XRX200_MAC_PISR_LPION, /* Receive Low-power Idle Mode is entered */
-+// XRX200_MAC_PISR_JAM, /* Jam Status Detected */
-+// XRX200_MAC_PISR_TOOSHORT, /* Too Short Frame Error Detected */
-+// XRX200_MAC_PISR_TOOLONG, /* Too Long Frame Error Detected */
-+// XRX200_MAC_PISR_LENERR, /* Length Mismatch Error Detected */
-+// XRX200_MAC_PISR_FCSERR, /* Frame Checksum Error Detected */
-+// XRX200_MAC_PISR_TXPAUSE, /* Pause Frame Transmitted */
-+// XRX200_MAC_PISR_RXPAUSE, /* Pause Frame Received */
-+// XRX200_MAC_PIER, /* MAC Interrupt Enable Register */
-+// XRX200_MAC_PIER_PACT, /* PHY Active Status */
-+// XRX200_MAC_PIER_SPEED, /* Megabit Speed Status */
-+// XRX200_MAC_PIER_FDUP, /* Full Duplex Status */
-+// XRX200_MAC_PIER_RXPAUEN, /* Receive Pause Enable Status */
-+// XRX200_MAC_PIER_TXPAUEN, /* Transmit Pause Enable Status */
-+// XRX200_MAC_PIER_LPIOFF, /* Low-power Idle Off Interrupt Mask */
-+// XRX200_MAC_PIER_LPION, /* Low-power Idle On Interrupt Mask */
-+// XRX200_MAC_PIER_JAM, /* Jam Status Interrupt Mask */
-+// XRX200_MAC_PIER_TOOSHORT, /* Too Short Frame Error Interrupt Mask */
-+// XRX200_MAC_PIER_TOOLONG, /* Too Long Frame Error Interrupt Mask */
-+// XRX200_MAC_PIER_LENERR, /* Length Mismatch Error Interrupt Mask */
-+// XRX200_MAC_PIER_FCSERR, /* Frame Checksum Error Interrupt Mask */
-+// XRX200_MAC_PIER_TXPAUSE, /* Transmit Pause Frame Interrupt Mask */
-+// XRX200_MAC_PIER_RXPAUSE, /* Receive Pause Frame Interrupt Mask */
-+// XRX200_MAC_CTRL_0, /* MAC Control Register0 */
-+// XRX200_MAC_CTRL_0_LCOL, /* Late Collision Control */
-+// XRX200_MAC_CTRL_0_BM, /* Burst Mode Control */
-+// XRX200_MAC_CTRL_0_APADEN, /* Automatic VLAN Padding Enable */
-+// XRX200_MAC_CTRL_0_VPAD2EN, /* Stacked VLAN Padding Enable */
-+// XRX200_MAC_CTRL_0_VPADEN, /* VLAN Padding Enable */
-+// XRX200_MAC_CTRL_0_PADEN, /* Padding Enable */
-+// XRX200_MAC_CTRL_0_FCS, /* Transmit FCS Control */
-+ XRX200_MAC_CTRL_0_FCON, /* Flow Control Mode */
-+// XRX200_MAC_CTRL_0_FDUP, /* Full Duplex Control */
-+// XRX200_MAC_CTRL_0_GMII, /* GMII/MII interface mode selection */
-+// XRX200_MAC_CTRL_1, /* MAC Control Register1 */
-+// XRX200_MAC_CTRL_1_SHORTPRE, /* Short Preamble Control */
-+// XRX200_MAC_CTRL_1_IPG, /* Minimum Inter Packet Gap Size */
-+// XRX200_MAC_CTRL_2, /* MAC Control Register2 */
-+// XRX200_MAC_CTRL_2_MLEN, /* Maximum Untagged Frame Length */
-+// XRX200_MAC_CTRL_2_LCHKL, /* Frame Length Check Long Enable */
-+// XRX200_MAC_CTRL_2_LCHKS, /* Frame Length Check Short Enable */
-+// XRX200_MAC_CTRL_3, /* MAC Control Register3 */
-+// XRX200_MAC_CTRL_3_RCNT, /* Retry Count */
-+// XRX200_MAC_CTRL_4, /* MAC Control Register4 */
-+// XRX200_MAC_CTRL_4_LPIEN, /* LPI Mode Enable */
-+// XRX200_MAC_CTRL_4_WAIT, /* LPI Wait Time */
-+// XRX200_MAC_CTRL_5_PJPS, /* MAC Control Register5 */
-+// XRX200_MAC_CTRL_5_PJPS_NOBP, /* Prolonged Jam pattern size during no-backpressure state */
-+// XRX200_MAC_CTRL_5_PJPS_BP, /* Prolonged Jam pattern size during backpressure state */
-+// XRX200_MAC_CTRL_6_XBUF, /* Transmit and ReceiveBuffer Control Register */
-+// XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */
-+// XRX200_MAC_CTRL_6_RBUF_INIT, /* Receive Buffer Initialization */
-+// XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */
-+// XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */
-+// XRX200_MAC_CTRL_6_XBUF_INIT, /* Initialize the Transmit Buffer */
-+// XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */
-+// XRX200_MAC_BUFST_XBUF, /* MAC Receive and TransmitBuffer Status Register */
-+// XRX200_MAC_BUFST_RBUF_UFL, /* Receive Buffer Underflow Indicator */
-+// XRX200_MAC_BUFST_RBUF_OFL, /* Receive Buffer Overflow Indicator */
-+// XRX200_MAC_BUFST_XBUF_UFL, /* Transmit Buffer Underflow Indicator */
-+// XRX200_MAC_BUFST_XBUF_OFL, /* Transmit Buffer Overflow Indicator */
-+// XRX200_MAC_TESTEN, /* MAC Test Enable Register */
-+// XRX200_MAC_TESTEN_JTEN, /* Jitter Test Enable */
-+// XRX200_MAC_TESTEN_TXER, /* Transmit Error Insertion */
-+// XRX200_MAC_TESTEN_LOOP, /* MAC Loopback Enable */
-+// XRX200_FDMA_CTRL, /* Ethernet Switch FetchDMA Control Register */
-+// XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */
-+// XRX200_FDMA_CTRL_LPI_MODE, /* Low Power Idle Mode */
-+// XRX200_FDMA_CTRL_EGSTAG, /* Egress Special Tag Size */
-+// XRX200_FDMA_CTRL_IGSTAG, /* Ingress Special Tag Size */
-+// XRX200_FDMA_CTRL_EXCOL, /* Excessive Collision Handling */
-+// XRX200_FDMA_STETYPE, /* Special Tag EthertypeControl Register */
-+// XRX200_FDMA_STETYPE_ETYPE, /* Special Tag Ethertype */
-+// XRX200_FDMA_VTETYPE, /* VLAN Tag EthertypeControl Register */
-+// XRX200_FDMA_VTETYPE_ETYPE, /* VLAN Tag Ethertype */
-+// XRX200_FDMA_STAT_0, /* FDMA Status Register0 */
-+// XRX200_FDMA_STAT_0_FSMS, /* FSM states status */
-+// XRX200_FDMA_IER, /* Fetch DMA Global InterruptEnable Register */
-+// XRX200_FDMA_IER_PCKD, /* Packet Drop Interrupt Enable */
-+// XRX200_FDMA_IER_PCKR, /* Packet Ready Interrupt Enable */
-+// XRX200_FDMA_IER_PCKT, /* Packet Sent Interrupt Enable */
-+// XRX200_FDMA_ISR, /* Fetch DMA Global InterruptStatus Register */
-+// XRX200_FDMA_ISR_PCKTD, /* Packet Drop */
-+// XRX200_FDMA_ISR_PCKR, /* Packet is Ready for Transmission */
-+// XRX200_FDMA_ISR_PCKT, /* Packet Sent Event */
-+// XRX200_FDMA_PCTRL, /* Ethernet SwitchFetch DMA Port Control Register */
-+// XRX200_FDMA_PCTRL_VLANMOD, /* VLAN Modification Enable */
-+// XRX200_FDMA_PCTRL_DSCPRM, /* DSCP Re-marking Enable */
-+// XRX200_FDMA_PCTRL_STEN, /* Special Tag Insertion Enable */
-+// XRX200_FDMA_PCTRL_EN, /* FDMA Port Enable */
-+// XRX200_FDMA_PRIO, /* Ethernet SwitchFetch DMA Port Priority Register */
-+// XRX200_FDMA_PRIO_PRIO, /* FDMA PRIO */
-+// XRX200_FDMA_PSTAT0, /* Ethernet SwitchFetch DMA Port Status Register 0 */
-+// XRX200_FDMA_PSTAT0_PKT_AVAIL, /* Port Egress Packet Available */
-+// XRX200_FDMA_PSTAT0_POK, /* Port Status OK */
-+// XRX200_FDMA_PSTAT0_PSEG, /* Port Egress Segment Count */
-+// XRX200_FDMA_PSTAT1_HDR, /* Ethernet SwitchFetch DMA Port Status Register 1 */
-+// XRX200_FDMA_PSTAT1_HDR_PTR, /* Header Pointer */
-+// XRX200_FDMA_TSTAMP0, /* Egress TimeStamp Register 0 */
-+// XRX200_FDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
-+// XRX200_FDMA_TSTAMP1, /* Egress TimeStamp Register 1 */
-+// XRX200_FDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
-+// XRX200_SDMA_CTRL, /* Ethernet Switch StoreDMA Control Register */
-+// XRX200_SDMA_CTRL_TSTEN, /* Time Stamp Enable */
-+// XRX200_SDMA_FCTHR1, /* SDMA Flow Control Threshold1 Register */
-+// XRX200_SDMA_FCTHR1_THR1, /* Threshold 1 */
-+// XRX200_SDMA_FCTHR2, /* SDMA Flow Control Threshold2 Register */
-+// XRX200_SDMA_FCTHR2_THR2, /* Threshold 2 */
-+// XRX200_SDMA_FCTHR3, /* SDMA Flow Control Threshold3 Register */
-+// XRX200_SDMA_FCTHR3_THR3, /* Threshold 3 */
-+// XRX200_SDMA_FCTHR4, /* SDMA Flow Control Threshold4 Register */
-+// XRX200_SDMA_FCTHR4_THR4, /* Threshold 4 */
-+// XRX200_SDMA_FCTHR5, /* SDMA Flow Control Threshold5 Register */
-+// XRX200_SDMA_FCTHR5_THR5, /* Threshold 5 */
-+// XRX200_SDMA_FCTHR6, /* SDMA Flow Control Threshold6 Register */
-+// XRX200_SDMA_FCTHR6_THR6, /* Threshold 6 */
-+// XRX200_SDMA_FCTHR7, /* SDMA Flow Control Threshold7 Register */
-+// XRX200_SDMA_FCTHR7_THR7, /* Threshold 7 */
-+// XRX200_SDMA_STAT_0, /* SDMA Status Register0 */
-+// XRX200_SDMA_STAT_0_BPS_FILL, /* Back Pressure Status */
-+// XRX200_SDMA_STAT_0_BPS_PNT, /* Back Pressure Status */
-+// XRX200_SDMA_STAT_0_DROP, /* Back Pressure Status */
-+// XRX200_SDMA_STAT_1, /* SDMA Status Register1 */
-+// XRX200_SDMA_STAT_1_FILL, /* Buffer Filling Level */
-+// XRX200_SDMA_STAT_2, /* SDMA Status Register2 */
-+// XRX200_SDMA_STAT_2_FSMS, /* FSM states status */
-+// XRX200_SDMA_IER, /* SDMA Interrupt Enable Register */
-+// XRX200_SDMA_IER_BPEX, /* Buffer Pointers Exceeded */
-+// XRX200_SDMA_IER_BFULL, /* Buffer Full */
-+// XRX200_SDMA_IER_FERR, /* Frame Error */
-+// XRX200_SDMA_IER_FRX, /* Frame Received Successfully */
-+// XRX200_SDMA_ISR, /* SDMA Interrupt Status Register */
-+// XRX200_SDMA_ISR_BPEX, /* Packet Descriptors Exceeded */
-+// XRX200_SDMA_ISR_BFULL, /* Buffer Full */
-+// XRX200_SDMA_ISR_FERR, /* Frame Error */
-+// XRX200_SDMA_ISR_FRX, /* Frame Received Successfully */
-+// XRX200_SDMA_PCTRL, /* Ethernet SwitchStore DMA Port Control Register */
-+// XRX200_SDMA_PCTRL_DTHR, /* Drop Threshold Selection */
-+// XRX200_SDMA_PCTRL_PTHR, /* Pause Threshold Selection */
-+// XRX200_SDMA_PCTRL_PHYEFWD, /* Forward PHY Error Frames */
-+// XRX200_SDMA_PCTRL_ALGFWD, /* Forward Alignment Error Frames */
-+// XRX200_SDMA_PCTRL_LENFWD, /* Forward Length Errored Frames */
-+// XRX200_SDMA_PCTRL_OSFWD, /* Forward Oversized Frames */
-+// XRX200_SDMA_PCTRL_USFWD, /* Forward Undersized Frames */
-+// XRX200_SDMA_PCTRL_FCSIGN, /* Ignore FCS Errors */
-+// XRX200_SDMA_PCTRL_FCSFWD, /* Forward FCS Errored Frames */
-+// XRX200_SDMA_PCTRL_PAUFWD, /* Pause Frame Forwarding */
-+// XRX200_SDMA_PCTRL_MFCEN, /* Metering Flow Control Enable */
-+// XRX200_SDMA_PCTRL_FCEN, /* Flow Control Enable */
-+// XRX200_SDMA_PCTRL_PEN, /* Port Enable */
-+// XRX200_SDMA_PRIO, /* Ethernet SwitchStore DMA Port Priority Register */
-+// XRX200_SDMA_PRIO_PRIO, /* SDMA PRIO */
-+// XRX200_SDMA_PSTAT0_HDR, /* Ethernet SwitchStore DMA Port Status Register 0 */
-+// XRX200_SDMA_PSTAT0_HDR_PTR, /* Port Ingress Queue Header Pointer */
-+// XRX200_SDMA_PSTAT1, /* Ethernet SwitchStore DMA Port Status Register 1 */
-+// XRX200_SDMA_PSTAT1_PPKT, /* Port Ingress Packet Count */
-+// XRX200_SDMA_TSTAMP0, /* Ingress TimeStamp Register 0 */
-+// XRX200_SDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
-+// XRX200_SDMA_TSTAMP1, /* Ingress TimeStamp Register 1 */
-+// XRX200_SDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
-+};
-+
-+
-+struct xrx200sw_reg {
-+ int offset;
-+ int shift;
-+ int size;
-+ int mult;
-+} xrx200sw_reg[] = {
-+// offeset shift size mult
-+// {0x0000, 0, 16, 0x00}, /* XRX200_ETHSW_SWRES Ethernet Switch ResetControl Register */
-+// {0x0000, 1, 1, 0x00}, /* XRX200_ETHSW_SWRES_R1 Hardware Reset */
-+// {0x0000, 0, 1, 0x00}, /* XRX200_ETHSW_SWRES_R0 Register Configuration */
-+// {0x0004, 0, 16, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT Ethernet Switch Clock ControlRegister */
-+// {0x0004, 12, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP Exponent to put system into sleep */
-+// {0x0004, 8, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE Exponent to wake up system */
-+// {0x0004, 7, 1, 0x00}, /* XRX200_ETHSW_CLK_CLK2_EN CLK2 Input for MAC */
-+// {0x0004, 6, 1, 0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN External Clock Divider Enable */
-+// {0x0004, 5, 1, 0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN Clock Gating Enable */
-+// {0x0004, 4, 1, 0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN Clock Gating Enable */
-+// {0x0004, 3, 1, 0x00}, /* XRX200_ETHSW_CLK_GAT_EN Clock Gating Enable */
-+// {0x0004, 2, 1, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN Clock Gating Enable */
-+// {0x0008, 0, 16, 0x00}, /* XRX200_ETHSW_DBG_STEP Ethernet Switch Debug ControlRegister */
-+// {0x0008, 12, 4, 0x00}, /* XRX200_ETHSW_DBG_CLK_SEL Trigger Enable */
-+// {0x0008, 11, 1, 0x00}, /* XRX200_ETHSW_DBG_MON_EN Monitoring Enable */
-+// {0x0008, 9, 2, 0x00}, /* XRX200_ETHSW_DBG_TRIG_EN Trigger Enable */
-+// {0x0008, 8, 1, 0x00}, /* XRX200_ETHSW_DBG_MODE Debug Mode */
-+// {0x0008, 0, 8, 0x00}, /* XRX200_ETHSW_DBG_STEP_TIME Clock Step Size */
-+// {0x000C, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_MODE Ethernet Switch SharedSegment Buffer Mode Register */
-+// {0x000C, 2, 4, 0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE Memory Address */
-+// {0x000C, 0, 2, 0x00}, /* XRX200_ETHSW_SSB_MODE_MODE Memory Access Mode */
-+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR Ethernet Switch SharedSegment Buffer Address Register */
-+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE Memory Address */
-+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA Ethernet Switch SharedSegment Buffer Data Register */
-+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA_DATA Data Value */
-+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0 Ethernet Switch CapabilityRegister 0 */
-+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0_SPEED Clock frequency */
-+// {0x001C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_1 Ethernet Switch CapabilityRegister 1 */
-+// {0x001C, 15, 1, 0x00}, /* XRX200_ETHSW_CAP_1_GMAC MAC operation mode */
-+// {0x001C, 8, 7, 0x00}, /* XRX200_ETHSW_CAP_1_QUEUE Number of queues */
-+// {0x001C, 4, 4, 0x00}, /* XRX200_ETHSW_CAP_1_VPORTS Number of virtual ports */
-+// {0x001C, 0, 4, 0x00}, /* XRX200_ETHSW_CAP_1_PPORTS Number of physical ports */
-+// {0x0020, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_2 Ethernet Switch CapabilityRegister 2 */
-+// {0x0020, 0, 11, 0x00}, /* XRX200_ETHSW_CAP_2_PACKETS Number of packets */
-+// {0x0024, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_3 Ethernet Switch CapabilityRegister 3 */
-+// {0x0024, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_3_METERS Number of traffic meters */
-+// {0x0024, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS Number of traffic shapers */
-+// {0x0028, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_4 Ethernet Switch CapabilityRegister 4 */
-+// {0x0028, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_4_PPPOE PPPoE table size */
-+// {0x0028, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_4_VLAN Active VLAN table size */
-+// {0x002C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_5 Ethernet Switch CapabilityRegister 5 */
-+// {0x002C, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN IP packet length table size */
-+// {0x002C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_5_PROT Protocol table size */
-+// {0x0030, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_6 Ethernet Switch CapabilityRegister 6 */
-+// {0x0030, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_6_MACDASA MAC DA/SA table size */
-+// {0x0030, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_6_APPL Application table size */
-+// {0x0034, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_7 Ethernet Switch CapabilityRegister 7 */
-+// {0x0034, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM IP DA/SA MSB table size */
-+// {0x0034, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL IP DA/SA LSB table size */
-+// {0x0038, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_8 Ethernet Switch CapabilityRegister 8 */
-+// {0x0038, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_8_MCAST Multicast table size */
-+// {0x003C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_9 Ethernet Switch CapabilityRegister 9 */
-+// {0x003C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_9_FLAGG Flow Aggregation table size */
-+// {0x0040, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_10 Ethernet Switch CapabilityRegister 10 */
-+// {0x0040, 0, 13, 0x00}, /* XRX200_ETHSW_CAP_10_MACBT MAC bridging table size */
-+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11 Ethernet Switch CapabilityRegister 11 */
-+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL Packet buffer size (lower part, in byte) */
-+// {0x0048, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_12 Ethernet Switch CapabilityRegister 12 */
-+// {0x0048, 0, 3, 0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH Packet buffer size (higher part, in byte) */
-+// {0x004C, 0, 16, 0x00}, /* XRX200_ETHSW_VERSION_REV Ethernet Switch VersionRegister */
-+// {0x004C, 8, 8, 0x00}, /* XRX200_ETHSW_VERSION_MOD_ID Module Identification */
-+// {0x004C, 0, 8, 0x00}, /* XRX200_ETHSW_VERSION_REV_ID Hardware Revision Identification */
-+// {0x0050, 0, 16, 0x00}, /* XRX200_ETHSW_IER Interrupt Enable Register */
-+// {0x0050, 4, 1, 0x00}, /* XRX200_ETHSW_IER_FDMAIE Fetch DMA Interrupt Enable */
-+// {0x0050, 3, 1, 0x00}, /* XRX200_ETHSW_IER_SDMAIE Store DMA Interrupt Enable */
-+// {0x0050, 2, 1, 0x00}, /* XRX200_ETHSW_IER_MACIE Ethernet MAC Interrupt Enable */
-+// {0x0050, 1, 1, 0x00}, /* XRX200_ETHSW_IER_PCEIE Parser and Classification Engine Interrupt Enable */
-+// {0x0050, 0, 1, 0x00}, /* XRX200_ETHSW_IER_BMIE Buffer Manager Interrupt Enable */
-+// {0x0054, 0, 16, 0x00}, /* XRX200_ETHSW_ISR Interrupt Status Register */
-+// {0x0054, 4, 1, 0x00}, /* XRX200_ETHSW_ISR_FDMAINT Fetch DMA Interrupt */
-+// {0x0054, 3, 1, 0x00}, /* XRX200_ETHSW_ISR_SDMAINT Store DMA Interrupt */
-+// {0x0054, 2, 1, 0x00}, /* XRX200_ETHSW_ISR_MACINT Ethernet MAC Interrupt */
-+// {0x0054, 1, 1, 0x00}, /* XRX200_ETHSW_ISR_PCEINT Parser and Classification Engine Interrupt */
-+// {0x0054, 0, 1, 0x00}, /* XRX200_ETHSW_ISR_BMINT Buffer Manager Interrupt */
-+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0 Ethernet Switch SpareCells 0 */
-+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0_SPARE SPARE0 */
-+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1 Ethernet Switch SpareCells 1 */
-+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1_SPARE SPARE1 */
-+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2 Ethernet Switch SpareCells 2 */
-+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2_SPARE SPARE2 */
-+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3 Ethernet Switch SpareCells 3 */
-+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3_SPARE SPARE3 */
-+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4 Ethernet Switch SpareCells 4 */
-+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4_SPARE SPARE4 */
-+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5 Ethernet Switch SpareCells 5 */
-+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5_SPARE SPARE5 */
-+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6 Ethernet Switch SpareCells 6 */
-+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6_SPARE SPARE6 */
-+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7 Ethernet Switch SpareCells 7 */
-+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7_SPARE SPARE7 */
-+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8 Ethernet Switch SpareCells 8 */
-+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8_SPARE SPARE8 */
-+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9 Ethernet Switch SpareCells 9 */
-+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9_SPARE SPARE9 */
-+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10 Ethernet Switch SpareCells 10 */
-+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10_SPARE SPARE10 */
-+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11 Ethernet Switch SpareCells 11 */
-+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11_SPARE SPARE11 */
-+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12 Ethernet Switch SpareCells 12 */
-+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12_SPARE SPARE12 */
-+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13 Ethernet Switch SpareCells 13 */
-+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13_SPARE SPARE13 */
-+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14 Ethernet Switch SpareCells 14 */
-+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14_SPARE SPARE14 */
-+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15 Ethernet Switch SpareCells 15 */
-+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15_SPARE SPARE15 */
-+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3 RAM Value Register 3 */
-+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3_VAL3 Data value [15:0] */
-+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2 RAM Value Register 2 */
-+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2_VAL2 Data value [15:0] */
-+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1 RAM Value Register 1 */
-+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1_VAL1 Data value [15:0] */
-+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0 RAM Value Register 0 */
-+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0_VAL0 Data value [15:0] */
-+// {0x0110, 0, 16, 0x00}, /* XRX200_BM_RAM_ADDR RAM Address Register */
-+// {0x0110, 0, 11, 0x00}, /* XRX200_BM_RAM_ADDR_ADDR RAM Address */
-+// {0x0114, 0, 16, 0x00}, /* XRX200_BM_RAM_CTRL RAM Access Control Register */
-+// {0x0114, 15, 1, 0x00}, /* XRX200_BM_RAM_CTRL_BAS Access Busy/Access Start */
-+// {0x0114, 5, 1, 0x00}, /* XRX200_BM_RAM_CTRL_OPMOD Lookup Table Access Operation Mode */
-+// {0x0114, 0, 5, 0x00}, /* XRX200_BM_RAM_CTRL_ADDR Address for RAM selection */
-+// {0x0118, 0, 16, 0x00}, /* XRX200_BM_FSQM_GCTRL Free Segment Queue ManagerGlobal Control Register */
-+// {0x0118, 0, 10, 0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM Maximum Segment Number */
-+// {0x011C, 0, 16, 0x00}, /* XRX200_BM_CONS_SEG Number of Consumed SegmentsRegister */
-+// {0x011C, 0, 10, 0x00}, /* XRX200_BM_CONS_SEG_FSEG Number of Consumed Segments */
-+// {0x0120, 0, 16, 0x00}, /* XRX200_BM_CONS_PKT Number of Consumed PacketPointers Register */
-+// {0x0120, 0, 11, 0x00}, /* XRX200_BM_CONS_PKT_FQP Number of Consumed Packet Pointers */
-+// {0x0124, 0, 16, 0x00}, /* XRX200_BM_GCTRL_F Buffer Manager Global ControlRegister 0 */
-+// {0x0124, 13, 1, 0x00}, /* XRX200_BM_GCTRL_BM_STA Buffer Manager Initialization Status Bit */
-+// {0x0124, 12, 1, 0x00}, /* XRX200_BM_GCTRL_SAT RMON Counter Update Mode */
-+// {0x0124, 11, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RBC Freeze RMON RX Bad Byte 64 Bit Counter */
-+// {0x0124, 10, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RGC Freeze RMON RX Good Byte 64 Bit Counter */
-+// {0x0124, 9, 1, 0x00}, /* XRX200_BM_GCTRL_FR_TGC Freeze RMON TX Good Byte 64 Bit Counter */
-+// {0x0124, 8, 1, 0x00}, /* XRX200_BM_GCTRL_I_FIN RAM initialization finished */
-+// {0x0124, 7, 1, 0x00}, /* XRX200_BM_GCTRL_CX_INI PQM Context RAM initialization */
-+// {0x0124, 6, 1, 0x00}, /* XRX200_BM_GCTRL_FP_INI FPQM RAM initialization */
-+// {0x0124, 5, 1, 0x00}, /* XRX200_BM_GCTRL_FS_INI FSQM RAM initialization */
-+// {0x0124, 4, 1, 0x00}, /* XRX200_BM_GCTRL_R_SRES Software Reset for RMON */
-+// {0x0124, 3, 1, 0x00}, /* XRX200_BM_GCTRL_S_SRES Software Reset for Scheduler */
-+// {0x0124, 2, 1, 0x00}, /* XRX200_BM_GCTRL_A_SRES Software Reset for AVG */
-+// {0x0124, 1, 1, 0x00}, /* XRX200_BM_GCTRL_P_SRES Software Reset for PQM */
-+// {0x0124, 0, 1, 0x00}, /* XRX200_BM_GCTRL_F_SRES Software Reset for FSQM */
-+// {0x0128, 0, 16, 0x00}, /* XRX200_BM_QUEUE_GCTRL Queue Manager GlobalControl Register 0 */
-+// {0x0128, 10, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD WRED Mode Signal */
-+// {0x0128, 7, 3, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI Average Queue Update Interval */
-+// {0x0128, 3, 4, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF Average Queue Weight Factor */
-+// {0x0128, 2, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN Queue Average Calculation Enable */
-+// {0x0128, 0, 2, 0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB Drop Probability Profile */
-+// {0x012C, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_0 WRED Red Threshold Register0 */
-+// {0x012C, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_0_MINTH Minimum Threshold */
-+// {0x0130, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_1 WRED Red Threshold Register1 */
-+// {0x0130, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH Maximum Threshold */
-+// {0x0134, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_0 WRED Yellow ThresholdRegister 0 */
-+// {0x0134, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_0_MINTH Minimum Threshold */
-+// {0x0138, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_1 WRED Yellow ThresholdRegister 1 */
-+// {0x0138, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH Maximum Threshold */
-+// {0x013C, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_0 WRED Green ThresholdRegister 0 */
-+// {0x013C, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_0_MINTH Minimum Threshold */
-+// {0x0140, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_1 WRED Green ThresholdRegister 1 */
-+// {0x0140, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH Maximum Threshold */
-+// {0x0144, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_0_THR Drop Threshold ConfigurationRegister 0 */
-+// {0x0144, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ Threshold for frames marked red */
-+// {0x0148, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_1_THY Drop Threshold ConfigurationRegister 1 */
-+// {0x0148, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ Threshold for frames marked yellow */
-+// {0x014C, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_2_THG Drop Threshold ConfigurationRegister 2 */
-+// {0x014C, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ Threshold for frames marked green */
-+// {0x0150, 0, 16, 0x00}, /* XRX200_BM_IER Buffer Manager Global InterruptEnable Register */
-+// {0x0150, 7, 1, 0x00}, /* XRX200_BM_IER_CNT4 Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
-+// {0x0150, 6, 1, 0x00}, /* XRX200_BM_IER_CNT3 Counter Group 3 (RMON-PQM) Interrupt Enable */
-+// {0x0150, 5, 1, 0x00}, /* XRX200_BM_IER_CNT2 Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
-+// {0x0150, 4, 1, 0x00}, /* XRX200_BM_IER_CNT1 Counter Group 1 (RMON-QFETCH) Interrupt Enable */
-+// {0x0150, 3, 1, 0x00}, /* XRX200_BM_IER_CNT0 Counter Group 0 (RMON-QSTOR) Interrupt Enable */
-+// {0x0150, 2, 1, 0x00}, /* XRX200_BM_IER_DEQ PQM dequeue Interrupt Enable */
-+// {0x0150, 1, 1, 0x00}, /* XRX200_BM_IER_ENQ PQM Enqueue Interrupt Enable */
-+// {0x0150, 0, 1, 0x00}, /* XRX200_BM_IER_FSQM Buffer Empty Interrupt Enable */
-+// {0x0154, 0, 16, 0x00}, /* XRX200_BM_ISR Buffer Manager Global InterruptStatus Register */
-+// {0x0154, 7, 1, 0x00}, /* XRX200_BM_ISR_CNT4 Counter Group 4 Interrupt */
-+// {0x0154, 6, 1, 0x00}, /* XRX200_BM_ISR_CNT3 Counter Group 3 Interrupt */
-+// {0x0154, 5, 1, 0x00}, /* XRX200_BM_ISR_CNT2 Counter Group 2 Interrupt */
-+// {0x0154, 4, 1, 0x00}, /* XRX200_BM_ISR_CNT1 Counter Group 1 Interrupt */
-+// {0x0154, 3, 1, 0x00}, /* XRX200_BM_ISR_CNT0 Counter Group 0 Interrupt */
-+// {0x0154, 2, 1, 0x00}, /* XRX200_BM_ISR_DEQ PQM dequeue Interrupt Enable */
-+// {0x0154, 1, 1, 0x00}, /* XRX200_BM_ISR_ENQ PQM Enqueue Interrupt */
-+// {0x0154, 0, 1, 0x00}, /* XRX200_BM_ISR_FSQM Buffer Empty Interrupt */
-+// {0x0158, 0, 16, 0x00}, /* XRX200_BM_CISEL Buffer Manager RMON CounterInterrupt Select Register */
-+// {0x0158, 0, 3, 0x00}, /* XRX200_BM_CISEL_PORT Port Number */
-+// {0x015C, 0, 16, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG Debug Control Register */
-+// {0x015C, 0, 8, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL Select Signal for Debug Multiplexer */
-+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG Debug Value Register */
-+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT Debug Data Value */
-+// {0x0200, 0, 16, 0x08}, /* XRX200_BM_PCFG Buffer Manager PortConfiguration Register */
-+// {0x0200, 0, 1, 0x08}, /* XRX200_BM_PCFG_CNTEN RMON Counter Enable */
-+// {0x0204, 0, 16, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1 Buffer ManagerRMON Control Register */
-+// {0x0204, 1, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES Software Reset for RMON RAM2 */
-+// {0x0204, 0, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES Software Reset for RMON RAM1 */
-+// {0x0400, 0, 16, 0x08}, /* XRX200_PQM_DP Packet Queue ManagerDrop Probability Register */
-+// {0x0400, 0, 2, 0x08}, /* XRX200_PQM_DP_DPROB Drop Probability Profile */
-+// {0x0404, 0, 16, 0x08}, /* XRX200_PQM_RS Packet Queue ManagerRate Shaper Assignment Register */
-+// {0x0404, 15, 1, 0x08}, /* XRX200_PQM_RS_EN2 Rate Shaper 2 Enable */
-+// {0x0404, 8, 6, 0x08}, /* XRX200_PQM_RS_RS2 Rate Shaper 2 */
-+// {0x0404, 7, 1, 0x08}, /* XRX200_PQM_RS_EN1 Rate Shaper 1 Enable */
-+// {0x0404, 0, 6, 0x08}, /* XRX200_PQM_RS_RS1 Rate Shaper 1 */
-+// {0x0500, 0, 16, 0x14}, /* XRX200_RS_CTRL Rate Shaper ControlRegister */
-+// {0x0500, 0, 1, 0x14}, /* XRX200_RS_CTRL_RSEN Rate Shaper Enable */
-+// {0x0504, 0, 16, 0x14}, /* XRX200_RS_CBS Rate Shaper CommittedBurst Size Register */
-+// {0x0504, 0, 10, 0x14}, /* XRX200_RS_CBS_CBS Committed Burst Size */
-+// {0x0508, 0, 16, 0x14}, /* XRX200_RS_IBS Rate Shaper InstantaneousBurst Size Register */
-+// {0x0508, 0, 2, 0x14}, /* XRX200_RS_IBS_IBS Instantaneous Burst Size */
-+// {0x050C, 0, 16, 0x14}, /* XRX200_RS_CIR_EXP Rate Shaper RateExponent Register */
-+// {0x050C, 0, 4, 0x14}, /* XRX200_RS_CIR_EXP_EXP Exponent */
-+// {0x0510, 0, 16, 0x14}, /* XRX200_RS_CIR_MANT Rate Shaper RateMantissa Register */
-+// {0x0510, 0, 10, 0x14}, /* XRX200_RS_CIR_MANT_MANT Mantissa */
-+ {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7 Table Key Data 7 */
-+// {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7 Key Value[15:0] */
-+ {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6 Table Key Data 6 */
-+// {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6 Key Value[15:0] */
-+ {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5 Table Key Data 5 */
-+// {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5 Key Value[15:0] */
-+ {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4 Table Key Data 4 */
-+// {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4 Key Value[15:0] */
-+ {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3 Table Key Data 3 */
-+// {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3 Key Value[15:0] */
-+ {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2 Table Key Data 2 */
-+// {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2 Key Value[15:0] */
-+ {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1 Table Key Data 1 */
-+// {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1 Key Value[31:16] */
-+ {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0 Table Key Data 0 */
-+// {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0 Key Value[15:0] */
-+ {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0 Table Mask Write Register0 */
-+// {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0 Mask Pattern [15:0] */
-+ {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4 Table Value Register4 */
-+// {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4 Data value [15:0] */
-+ {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3 Table Value Register3 */
-+// {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3 Data value [15:0] */
-+ {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2 Table Value Register2 */
-+// {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2 Data value [15:0] */
-+ {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1 Table Value Register1 */
-+// {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1 Data value [15:0] */
-+ {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0 Table Value Register0 */
-+// {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0 Data value [15:0] */
-+// {0x1138, 0, 16, 0x00}, /* XRX200_PCE_TBL_ADDR Table Entry AddressRegister */
-+ {0x1138, 0, 11, 0x00}, /* XRX200_PCE_TBL_ADDR_ADDR Table Address */
-+// {0x113C, 0, 16, 0x00}, /* XRX200_PCE_TBL_CTRL Table Access ControlRegister */
-+ {0x113C, 15, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_BAS Access Busy/Access Start */
-+ {0x113C, 13, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_TYPE Lookup Entry Type */
-+ {0x113C, 12, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_VLD Lookup Entry Valid */
-+ {0x113C, 7, 4, 0x00}, /* XRX200_PCE_TBL_CTRL_GMAP Group Map */
-+ {0x113C, 5, 2, 0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD Lookup Table Access Operation Mode */
-+ {0x113C, 0, 5, 0x00}, /* XRX200_PCE_TBL_CTRL_ADDR Lookup Table Address */
-+// {0x1140, 0, 16, 0x00}, /* XRX200_PCE_TBL_STAT Table General StatusRegister */
-+// {0x1140, 2, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TBUSY Table Access Busy */
-+// {0x1140, 1, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TEMPT Table Empty */
-+// {0x1140, 0, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TFUL Table Full */
-+// {0x1144, 0, 16, 0x00}, /* XRX200_PCE_AGE_0 Aging Counter ConfigurationRegister 0 */
-+// {0x1144, 0, 4, 0x00}, /* XRX200_PCE_AGE_0_EXP Aging Counter Exponent Value */
-+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1 Aging Counter ConfigurationRegister 1 */
-+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1_MANT Aging Counter Mantissa Value */
-+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1 Port Map Register 1 */
-+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1_MPMAP Monitoring Port Map */
-+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2 Port Map Register 2 */
-+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP Default Multicast Port Map */
-+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3 Port Map Register 3 */
-+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3_UUCMAP Default Unknown Unicast Port Map */
-+// {0x1158, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_0 PCE Global Control Register0 */
-+// {0x1158, 15, 1, 0x00}, /* XRX200_PCE_GCTRL_0_IGMP IGMP Mode Selection */
-+ {0x1158, 14, 1, 0x00}, /* XRX200_PCE_GCTRL_0_VLAN VLAN-aware Switching */
-+// {0x1158, 13, 1, 0x00}, /* XRX200_PCE_GCTRL_0_NOPM No Port Map Forwarding */
-+// {0x1158, 12, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONUC Unknown Unicast Storm Control */
-+// {0x1158, 11, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMC Multicast Storm Control */
-+// {0x1158, 10, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONBC Broadcast Storm Control */
-+// {0x1158, 8, 2, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD Storm Control Mode */
-+// {0x1158, 4, 4, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMET Storm Control Metering Instance */
-+// {0x1158, 3, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID Access Request */
-+// {0x1158, 2, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD Port Lock Mode */
-+// {0x1158, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD MAC Address Learning Limitation Mode */
-+// {0x1158, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MTFL MAC Table Flushing */
-+// {0x115C, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_1 PCE Global Control Register1 */
-+// {0x115C, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS PCE Disable after currently processed packet */
-+// {0x115C, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD MAC Address Learning Mode */
-+// {0x1160, 0, 16, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL Three-color MarkerGlobal Control Register */
-+// {0x1160, 6, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */
-+// {0x1160, 3, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */
-+// {0x1160, 0, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */
-+// {0x1164, 0, 16, 0x00}, /* XRX200_PCE_IGMP_CTRL IGMP Control Register */
-+// {0x1164, 15, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN Force Aging of Table Entries Enable */
-+// {0x1164, 14, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE Fast Leave Enable */
-+// {0x1164, 13, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN Default Maximum Response Time Enable */
-+// {0x1164, 12, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP Join Aggregation Suppression Enable */
-+// {0x1164, 11, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP Report Suppression Enable */
-+// {0x1164, 10, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN Snooping of Router Port Enable */
-+// {0x1164, 8, 2, 0x00}, /* XRX200_PCE_IGMP_CTRL_ROB Robustness Variable */
-+// {0x1164, 0, 8, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT IGMP Default Maximum Response Time */
-+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM IGMP Default RouterPort Map Register */
-+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM IGMP Default Router Port Map */
-+// {0x116C, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_0 IGMP Aging Register0 */
-+// {0x116C, 3, 8, 0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT IGMP Group Aging Time Mantissa */
-+// {0x116C, 0, 3, 0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP IGMP Group Aging Time Exponent */
-+// {0x1170, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_1 IGMP Aging Register1 */
-+// {0x1170, 0, 12, 0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT IGMP Router Port Aging Time Mantissa */
-+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT IGMP Status Register */
-+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT_IGPM IGMP Port Map */
-+// {0x1178, 0, 16, 0x00}, /* XRX200_WOL_GLB_CTRL Wake-on-LAN ControlRegister */
-+// {0x1178, 0, 1, 0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN WoL Password Enable */
-+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0 Wake-on-LAN DestinationAddress Register 0 */
-+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0_DA0 WoL Destination Address [15:0] */
-+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1 Wake-on-LAN DestinationAddress Register 1 */
-+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1_DA1 WoL Destination Address [31:16] */
-+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2 Wake-on-LAN DestinationAddress Register 2 */
-+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2_DA2 WoL Destination Address [47:32] */
-+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0 Wake-on-LAN Password Register0 */
-+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0_PW0 WoL Password [15:0] */
-+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1 Wake-on-LAN Password Register1 */
-+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1_PW1 WoL Password [31:16] */
-+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2 Wake-on-LAN Password Register2 */
-+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2_PW2 WoL Password [47:32] */
-+// {0x1194, 0, 16, 0x00}, /* XRX200_PCE_IER_0_PINT Parser and ClassificationEngine Global Interrupt Enable Register 0 */
-+// {0x1194, 15, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_15 Port Interrupt Enable */
-+// {0x1194, 14, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_14 Port Interrupt Enable */
-+// {0x1194, 13, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_13 Port Interrupt Enable */
-+// {0x1194, 12, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_12 Port Interrupt Enable */
-+// {0x1194, 11, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_11 Port Interrupt Enable */
-+// {0x1194, 10, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_10 Port Interrupt Enable */
-+// {0x1194, 9, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_9 Port Interrupt Enable */
-+// {0x1194, 8, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_8 Port Interrupt Enable */
-+// {0x1194, 7, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_7 Port Interrupt Enable */
-+// {0x1194, 6, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_6 Port Interrupt Enable */
-+// {0x1194, 5, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_5 Port Interrupt Enable */
-+// {0x1194, 4, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_4 Port Interrupt Enable */
-+// {0x1194, 3, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_3 Port Interrupt Enable */
-+// {0x1194, 2, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_2 Port Interrupt Enable */
-+// {0x1194, 1, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_1 Port Interrupt Enable */
-+// {0x1194, 0, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_0 Port Interrupt Enable */
-+// {0x1198, 0, 16, 0x00}, /* XRX200_PCE_IER_1 Parser and ClassificationEngine Global Interrupt Enable Register 1 */
-+// {0x1198, 6, 1, 0x00}, /* XRX200_PCE_IER_1_FLOWINT Traffic Flow Table Interrupt Rule matched Interrupt Enable */
-+// {0x1198, 5, 1, 0x00}, /* XRX200_PCE_IER_1_CPH2 Classification Phase 2 Ready Interrupt Enable */
-+// {0x1198, 4, 1, 0x00}, /* XRX200_PCE_IER_1_CPH1 Classification Phase 1 Ready Interrupt Enable */
-+// {0x1198, 3, 1, 0x00}, /* XRX200_PCE_IER_1_CPH0 Classification Phase 0 Ready Interrupt Enable */
-+// {0x1198, 2, 1, 0x00}, /* XRX200_PCE_IER_1_PRDY Parser Ready Interrupt Enable */
-+// {0x1198, 1, 1, 0x00}, /* XRX200_PCE_IER_1_IGTF IGMP Table Full Interrupt Enable */
-+// {0x1198, 0, 1, 0x00}, /* XRX200_PCE_IER_1_MTF MAC Table Full Interrupt Enable */
-+// {0x119C, 0, 16, 0x00}, /* XRX200_PCE_ISR_0_PINT Parser and ClassificationEngine Global Interrupt Status Register 0 */
-+// {0x119C, 15, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_15 Port Interrupt */
-+// {0x119C, 14, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_14 Port Interrupt */
-+// {0x119C, 13, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_13 Port Interrupt */
-+// {0x119C, 12, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_12 Port Interrupt */
-+// {0x119C, 11, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_11 Port Interrupt */
-+// {0x119C, 10, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_10 Port Interrupt */
-+// {0x119C, 9, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_9 Port Interrupt */
-+// {0x119C, 8, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_8 Port Interrupt */
-+// {0x119C, 7, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_7 Port Interrupt */
-+// {0x119C, 6, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_6 Port Interrupt */
-+// {0x119C, 5, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_5 Port Interrupt */
-+// {0x119C, 4, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_4 Port Interrupt */
-+// {0x119C, 3, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_3 Port Interrupt */
-+// {0x119C, 2, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_2 Port Interrupt */
-+// {0x119C, 1, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_1 Port Interrupt */
-+// {0x119C, 0, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_0 Port Interrupt */
-+// {0x11A0, 0, 16, 0x00}, /* XRX200_PCE_ISR_1 Parser and ClassificationEngine Global Interrupt Status Register 1 */
-+// {0x11A0, 6, 1, 0x00}, /* XRX200_PCE_ISR_1_FLOWINT Traffic Flow Table Interrupt Rule matched */
-+// {0x11A0, 5, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH2 Classification Phase 2 Ready Interrupt */
-+// {0x11A0, 4, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH1 Classification Phase 1 Ready Interrupt */
-+// {0x11A0, 3, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH0 Classification Phase 0 Ready Interrupt */
-+// {0x11A0, 2, 1, 0x00}, /* XRX200_PCE_ISR_1_PRDY Parser Ready Interrupt */
-+// {0x11A0, 1, 1, 0x00}, /* XRX200_PCE_ISR_1_IGTF IGMP Table Full Interrupt */
-+// {0x11A0, 0, 1, 0x00}, /* XRX200_PCE_ISR_1_MTF MAC Table Full Interrupt */
-+// {0x11A4, 0, 16, 0x00}, /* XRX200_PARSER_STAT_FIFO Parser Status Register */
-+// {0x11A4, 8, 8, 0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */
-+// {0x11A4, 5, 3, 0x00}, /* XRX200_PARSER_STAT_FSM_STATE Parser FSM State */
-+// {0x11A4, 4, 1, 0x00}, /* XRX200_PARSER_STAT_PKT_ERR Packet error detected */
-+// {0x11A4, 3, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_FIN Parser FSM finished */
-+// {0x11A4, 2, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_START Parser FSM start */
-+// {0x11A4, 1, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_RDY Parser FIFO ready for read. */
-+// {0x11A4, 0, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_FULL Parser */
-+// {0x1200, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_0 PCE Port ControlRegister 0 */
-+// {0x1200, 13, 1, 0x28}, /* XRX200_PCE_PCTRL_0_MCST Multicast Forwarding Mode Selection */
-+// {0x1200, 12, 1, 0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN Table-based Egress Special Tag Enable */
-+// {0x1200, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN Ingress Special Tag Enable */
-+// {0x1200, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PCPEN PCP Remarking Mode */
-+// {0x1200, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CLPEN Class Remarking Mode */
-+// {0x1200, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_0_DPEN Drop Precedence Remarking Mode */
-+// {0x1200, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CMOD Three-color Marker Color Mode */
-+// {0x1200, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_0_VREP VLAN Replacement Mode */
-+ {0x1200, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_0_TVM Transparent VLAN Mode */
-+// {0x1200, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PLOCK Port Locking Enable */
-+// {0x1200, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS Aging Disable */
-+// {0x1200, 0, 3, 0x28}, /* XRX200_PCE_PCTRL_0_PSTATE Port State */
-+// {0x1204, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_1 PCE Port ControlRegister 1 */
-+// {0x1204, 0, 8, 0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM MAC Address Learning Limit */
-+// {0x1208, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_2 PCE Port ControlRegister 2 */
-+// {0x1208, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD DSCP Mode Selection */
-+// {0x1208, 5, 2, 0x28}, /* XRX200_PCE_PCTRL_2_DSCP Enable DSCP to select the Class of Service */
-+// {0x1208, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_2_PCP Enable VLAN PCP to select the Class of Service */
-+// {0x1208, 0, 4, 0x28}, /* XRX200_PCE_PCTRL_2_PCLASS Port-based Traffic Class */
-+// {0x120C, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_3_VIO PCE Port ControlRegister 3 */
-+// {0x120C, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_3_EDIR Egress Redirection Mode */
-+// {0x120C, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR Receive Mirroring Enable for dropped frames */
-+// {0x120C, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR Receive Mirroring Enable for valid frames */
-+// {0x120C, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_3_TXMIR Transmit Mirroring Enable */
-+// {0x120C, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_7 Violation Type 7 Mirroring Enable */
-+// {0x120C, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_6 Violation Type 6 Mirroring Enable */
-+// {0x120C, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_5 Violation Type 5 Mirroring Enable */
-+// {0x120C, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_4 Violation Type 4 Mirroring Enable */
-+// {0x120C, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_3 Violation Type 3 Mirroring Enable */
-+// {0x120C, 2, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_2 Violation Type 2 Mirroring Enable */
-+// {0x120C, 1, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_1 Violation Type 1 Mirroring Enable */
-+// {0x120C, 0, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_0 Violation Type 0 Mirroring Enable */
-+// {0x1210, 0, 16, 0x28}, /* XRX200_WOL_CTRL Wake-on-LAN ControlRegister */
-+// {0x1210, 0, 1, 0x28}, /* XRX200_WOL_CTRL_PORT WoL Enable */
-+// {0x1214, 0, 16, 0x28}, /* XRX200_PCE_VCTRL PCE VLAN ControlRegister */
-+ {0x1214, 5, 1, 0x28}, /* XRX200_PCE_VCTRL_VSR VLAN Security Rule */
-+ {0x1214, 4, 1, 0x28}, /* XRX200_PCE_VCTRL_VEMR VLAN Egress Member Violation Rule */
-+ {0x1214, 3, 1, 0x28}, /* XRX200_PCE_VCTRL_VIMR VLAN Ingress Member Violation Rule */
-+ {0x1214, 1, 2, 0x28}, /* XRX200_PCE_VCTRL_VINR VLAN Ingress Tag Rule */
-+ {0x1214, 0, 1, 0x28}, /* XRX200_PCE_VCTRL_UVR Unknown VLAN Rule */
-+// {0x1218, 0, 16, 0x28}, /* XRX200_PCE_DEFPVID PCE Default PortVID Register */
-+ {0x1218, 0, 6, 0x28}, /* XRX200_PCE_DEFPVID_PVID Default Port VID Index */
-+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT PCE Port StatusRegister */
-+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT_LRNCNT Learning Count */
-+// {0x1220, 0, 16, 0x28}, /* XRX200_PCE_PIER Parser and ClassificationEngine Port Interrupt Enable Register */
-+// {0x1220, 5, 1, 0x28}, /* XRX200_PCE_PIER_CLDRP Classification Drop Interrupt Enable */
-+// {0x1220, 4, 1, 0x28}, /* XRX200_PCE_PIER_PTDRP Port Drop Interrupt Enable */
-+// {0x1220, 3, 1, 0x28}, /* XRX200_PCE_PIER_VLAN VLAN Violation Interrupt Enable */
-+// {0x1220, 2, 1, 0x28}, /* XRX200_PCE_PIER_WOL Wake-on-LAN Interrupt Enable */
-+// {0x1220, 1, 1, 0x28}, /* XRX200_PCE_PIER_LOCK Port Limit Alert Interrupt Enable */
-+// {0x1220, 0, 1, 0x28}, /* XRX200_PCE_PIER_LIM Port Lock Alert Interrupt Enable */
-+// {0x1224, 0, 16, 0x28}, /* XRX200_PCE_PISR Parser and ClassificationEngine Port Interrupt Status Register */
-+// {0x1224, 5, 1, 0x28}, /* XRX200_PCE_PISR_CLDRP Classification Drop Interrupt */
-+// {0x1224, 4, 1, 0x28}, /* XRX200_PCE_PISR_PTDRP Port Drop Interrupt */
-+// {0x1224, 3, 1, 0x28}, /* XRX200_PCE_PISR_VLAN VLAN Violation Interrupt */
-+// {0x1224, 2, 1, 0x28}, /* XRX200_PCE_PISR_WOL Wake-on-LAN Interrupt */
-+// {0x1224, 1, 1, 0x28}, /* XRX200_PCE_PISR_LOCK Port Lock Alert Interrupt */
-+// {0x1224, 0, 1, 0x28}, /* XRX200_PCE_PISR_LIMIT Port Limitation Alert Interrupt */
-+// {0x1600, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CTRL Three-colorMarker Control Register */
-+// {0x1600, 0, 1, 0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN Three-color Marker metering instance enable */
-+// {0x1604, 0, 16, 0x1c}, /* XRX200_PCE_TCM_STAT Three-colorMarker Status Register */
-+// {0x1604, 1, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL1 Three-color Marker Alert 1 Status */
-+// {0x1604, 0, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL0 Three-color Marker Alert 0 Status */
-+// {0x1608, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CBS Three-color MarkerCommitted Burst Size Register */
-+// {0x1608, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CBS_CBS Committed Burst Size */
-+// {0x160C, 0, 16, 0x1c}, /* XRX200_PCE_TCM_EBS Three-color MarkerExcess Burst Size Register */
-+// {0x160C, 0, 10, 0x1c}, /* XRX200_PCE_TCM_EBS_EBS Excess Burst Size */
-+// {0x1610, 0, 16, 0x1c}, /* XRX200_PCE_TCM_IBS Three-color MarkerInstantaneous Burst Size Register */
-+// {0x1610, 0, 2, 0x1c}, /* XRX200_PCE_TCM_IBS_IBS Instantaneous Burst Size */
-+// {0x1614, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT Three-colorMarker Constant Information Rate Mantissa Register */
-+// {0x1614, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT Rate Counter Mantissa */
-+// {0x1618, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP Three-colorMarker Constant Information Rate Exponent Register */
-+// {0x1618, 0, 4, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP Rate Counter Exponent */
-+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST MAC Test Register */
-+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST_JTP Jitter Test Pattern */
-+// {0x2304, 0, 16, 0x00}, /* XRX200_MAC_PFAD_CFG MAC Pause FrameSource Address Configuration Register */
-+// {0x2304, 0, 1, 0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD Source Address Mode */
-+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0 Pause Frame SourceAddress Part 0 */
-+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0_PFAD Pause Frame Source Address Part 0 */
-+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1 Pause Frame SourceAddress Part 1 */
-+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1_PFAD Pause Frame Source Address Part 1 */
-+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2 Pause Frame SourceAddress Part 2 */
-+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2_PFAD Pause Frame Source Address Part 2 */
-+// {0x2314, 0, 16, 0x00}, /* XRX200_MAC_FLEN MAC Frame Length Register */
-+// {0x2314, 0, 14, 0x00}, /* XRX200_MAC_FLEN_LEN Maximum Frame Length */
-+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0 MAC VLAN EthertypeRegister 0 */
-+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER Ethertype */
-+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1 MAC VLAN EthertypeRegister 1 */
-+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER Ethertype */
-+// {0x2320, 0, 16, 0x00}, /* XRX200_MAC_IER MAC Interrupt EnableRegister */
-+// {0x2320, 0, 8, 0x00}, /* XRX200_MAC_IER_MACIEN MAC Interrupt Enable */
-+// {0x2324, 0, 16, 0x00}, /* XRX200_MAC_ISR MAC Interrupt StatusRegister */
-+// {0x2324, 0, 8, 0x00}, /* XRX200_MAC_ISR_MACINT MAC Interrupt */
-+// {0x2400, 0, 16, 0x30}, /* XRX200_MAC_PSTAT MAC Port Status Register */
-+// {0x2400, 11, 1, 0x30}, /* XRX200_MAC_PSTAT_PACT PHY Active Status */
-+ {0x2400, 10, 1, 0x30}, /* XRX200_MAC_PSTAT_GBIT Gigabit Speed Status */
-+ {0x2400, 9, 1, 0x30}, /* XRX200_MAC_PSTAT_MBIT Megabit Speed Status */
-+ {0x2400, 8, 1, 0x30}, /* XRX200_MAC_PSTAT_FDUP Full Duplex Status */
-+// {0x2400, 7, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAU Receive Pause Status */
-+// {0x2400, 6, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAU Transmit Pause Status */
-+// {0x2400, 5, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAUEN Receive Pause Enable Status */
-+// {0x2400, 4, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAUEN Transmit Pause Enable Status */
-+ {0x2400, 3, 1, 0x30}, /* XRX200_MAC_PSTAT_LSTAT Link Status */
-+// {0x2400, 2, 1, 0x30}, /* XRX200_MAC_PSTAT_CRS Carrier Sense Status */
-+// {0x2400, 1, 1, 0x30}, /* XRX200_MAC_PSTAT_TXLPI Transmit Low-power Idle Status */
-+// {0x2400, 0, 1, 0x30}, /* XRX200_MAC_PSTAT_RXLPI Receive Low-power Idle Status */
-+// {0x2404, 0, 16, 0x30}, /* XRX200_MAC_PISR MAC Interrupt Status Register */
-+// {0x2404, 13, 1, 0x30}, /* XRX200_MAC_PISR_PACT PHY Active Status */
-+// {0x2404, 12, 1, 0x30}, /* XRX200_MAC_PISR_SPEED Megabit Speed Status */
-+// {0x2404, 11, 1, 0x30}, /* XRX200_MAC_PISR_FDUP Full Duplex Status */
-+// {0x2404, 10, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUEN Receive Pause Enable Status */
-+// {0x2404, 9, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUEN Transmit Pause Enable Status */
-+// {0x2404, 8, 1, 0x30}, /* XRX200_MAC_PISR_LPIOFF Receive Low-power Idle Mode is left */
-+// {0x2404, 7, 1, 0x30}, /* XRX200_MAC_PISR_LPION Receive Low-power Idle Mode is entered */
-+// {0x2404, 6, 1, 0x30}, /* XRX200_MAC_PISR_JAM Jam Status Detected */
-+// {0x2404, 5, 1, 0x30}, /* XRX200_MAC_PISR_TOOSHORT Too Short Frame Error Detected */
-+// {0x2404, 4, 1, 0x30}, /* XRX200_MAC_PISR_TOOLONG Too Long Frame Error Detected */
-+// {0x2404, 3, 1, 0x30}, /* XRX200_MAC_PISR_LENERR Length Mismatch Error Detected */
-+// {0x2404, 2, 1, 0x30}, /* XRX200_MAC_PISR_FCSERR Frame Checksum Error Detected */
-+// {0x2404, 1, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUSE Pause Frame Transmitted */
-+// {0x2404, 0, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUSE Pause Frame Received */
-+// {0x2408, 0, 16, 0x30}, /* XRX200_MAC_PIER MAC Interrupt Enable Register */
-+// {0x2408, 13, 1, 0x30}, /* XRX200_MAC_PIER_PACT PHY Active Status */
-+// {0x2408, 12, 1, 0x30}, /* XRX200_MAC_PIER_SPEED Megabit Speed Status */
-+// {0x2408, 11, 1, 0x30}, /* XRX200_MAC_PIER_FDUP Full Duplex Status */
-+// {0x2408, 10, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUEN Receive Pause Enable Status */
-+// {0x2408, 9, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUEN Transmit Pause Enable Status */
-+// {0x2408, 8, 1, 0x30}, /* XRX200_MAC_PIER_LPIOFF Low-power Idle Off Interrupt Mask */
-+// {0x2408, 7, 1, 0x30}, /* XRX200_MAC_PIER_LPION Low-power Idle On Interrupt Mask */
-+// {0x2408, 6, 1, 0x30}, /* XRX200_MAC_PIER_JAM Jam Status Interrupt Mask */
-+// {0x2408, 5, 1, 0x30}, /* XRX200_MAC_PIER_TOOSHORT Too Short Frame Error Interrupt Mask */
-+// {0x2408, 4, 1, 0x30}, /* XRX200_MAC_PIER_TOOLONG Too Long Frame Error Interrupt Mask */
-+// {0x2408, 3, 1, 0x30}, /* XRX200_MAC_PIER_LENERR Length Mismatch Error Interrupt Mask */
-+// {0x2408, 2, 1, 0x30}, /* XRX200_MAC_PIER_FCSERR Frame Checksum Error Interrupt Mask */
-+// {0x2408, 1, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUSE Transmit Pause Frame Interrupt Mask */
-+// {0x2408, 0, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUSE Receive Pause Frame Interrupt Mask */
-+// {0x240C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_0 MAC Control Register0 */
-+// {0x240C, 13, 2, 0x30}, /* XRX200_MAC_CTRL_0_LCOL Late Collision Control */
-+// {0x240C, 12, 1, 0x30}, /* XRX200_MAC_CTRL_0_BM Burst Mode Control */
-+// {0x240C, 11, 1, 0x30}, /* XRX200_MAC_CTRL_0_APADEN Automatic VLAN Padding Enable */
-+// {0x240C, 10, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN Stacked VLAN Padding Enable */
-+// {0x240C, 9, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPADEN VLAN Padding Enable */
-+// {0x240C, 8, 1, 0x30}, /* XRX200_MAC_CTRL_0_PADEN Padding Enable */
-+// {0x240C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_0_FCS Transmit FCS Control */
-+ {0x240C, 4, 3, 0x30}, /* XRX200_MAC_CTRL_0_FCON Flow Control Mode */
-+// {0x240C, 2, 2, 0x30}, /* XRX200_MAC_CTRL_0_FDUP Full Duplex Control */
-+// {0x240C, 0, 2, 0x30}, /* XRX200_MAC_CTRL_0_GMII GMII/MII interface mode selection */
-+// {0x2410, 0, 16, 0x30}, /* XRX200_MAC_CTRL_1 MAC Control Register1 */
-+// {0x2410, 8, 1, 0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE Short Preamble Control */
-+// {0x2410, 0, 4, 0x30}, /* XRX200_MAC_CTRL_1_IPG Minimum Inter Packet Gap Size */
-+// {0x2414, 0, 16, 0x30}, /* XRX200_MAC_CTRL_2 MAC Control Register2 */
-+// {0x2414, 3, 1, 0x30}, /* XRX200_MAC_CTRL_2_MLEN Maximum Untagged Frame Length */
-+// {0x2414, 2, 1, 0x30}, /* XRX200_MAC_CTRL_2_LCHKL Frame Length Check Long Enable */
-+// {0x2414, 0, 2, 0x30}, /* XRX200_MAC_CTRL_2_LCHKS Frame Length Check Short Enable */
-+// {0x2418, 0, 16, 0x30}, /* XRX200_MAC_CTRL_3 MAC Control Register3 */
-+// {0x2418, 0, 4, 0x30}, /* XRX200_MAC_CTRL_3_RCNT Retry Count */
-+// {0x241C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_4 MAC Control Register4 */
-+// {0x241C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_4_LPIEN LPI Mode Enable */
-+// {0x241C, 0, 7, 0x30}, /* XRX200_MAC_CTRL_4_WAIT LPI Wait Time */
-+// {0x2420, 0, 16, 0x30}, /* XRX200_MAC_CTRL_5_PJPS MAC Control Register5 */
-+// {0x2420, 1, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP Prolonged Jam pattern size during no-backpressure state */
-+// {0x2420, 0, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP Prolonged Jam pattern size during backpressure state */
-+// {0x2424, 0, 16, 0x30}, /* XRX200_MAC_CTRL_6_XBUF Transmit and ReceiveBuffer Control Register */
-+// {0x2424, 9, 3, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP Delay */
-+// {0x2424, 8, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT Receive Buffer Initialization */
-+// {0x2424, 6, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS Bypass the Receive Buffer */
-+// {0x2424, 3, 3, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP Delay */
-+// {0x2424, 2, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT Initialize the Transmit Buffer */
-+// {0x2424, 0, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS Bypass the Transmit Buffer */
-+// {0x2428, 0, 16, 0x30}, /* XRX200_MAC_BUFST_XBUF MAC Receive and TransmitBuffer Status Register */
-+// {0x2428, 3, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_UFL Receive Buffer Underflow Indicator */
-+// {0x2428, 2, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_OFL Receive Buffer Overflow Indicator */
-+// {0x2428, 1, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_UFL Transmit Buffer Underflow Indicator */
-+// {0x2428, 0, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_OFL Transmit Buffer Overflow Indicator */
-+// {0x242C, 0, 16, 0x30}, /* XRX200_MAC_TESTEN MAC Test Enable Register */
-+// {0x242C, 2, 1, 0x30}, /* XRX200_MAC_TESTEN_JTEN Jitter Test Enable */
-+// {0x242C, 1, 1, 0x30}, /* XRX200_MAC_TESTEN_TXER Transmit Error Insertion */
-+// {0x242C, 0, 1, 0x30}, /* XRX200_MAC_TESTEN_LOOP MAC Loopback Enable */
-+// {0x2900, 0, 16, 0x00}, /* XRX200_FDMA_CTRL Ethernet Switch FetchDMA Control Register */
-+// {0x2900, 7, 5, 0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */
-+// {0x2900, 4, 3, 0x00}, /* XRX200_FDMA_CTRL_LPI_MODE Low Power Idle Mode */
-+// {0x2900, 2, 2, 0x00}, /* XRX200_FDMA_CTRL_EGSTAG Egress Special Tag Size */
-+// {0x2900, 1, 1, 0x00}, /* XRX200_FDMA_CTRL_IGSTAG Ingress Special Tag Size */
-+// {0x2900, 0, 1, 0x00}, /* XRX200_FDMA_CTRL_EXCOL Excessive Collision Handling */
-+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE Special Tag EthertypeControl Register */
-+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE_ETYPE Special Tag Ethertype */
-+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE VLAN Tag EthertypeControl Register */
-+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE_ETYPE VLAN Tag Ethertype */
-+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0 FDMA Status Register0 */
-+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0_FSMS FSM states status */
-+// {0x2910, 0, 16, 0x00}, /* XRX200_FDMA_IER Fetch DMA Global InterruptEnable Register */
-+// {0x2910, 14, 1, 0x00}, /* XRX200_FDMA_IER_PCKD Packet Drop Interrupt Enable */
-+// {0x2910, 13, 1, 0x00}, /* XRX200_FDMA_IER_PCKR Packet Ready Interrupt Enable */
-+// {0x2910, 0, 8, 0x00}, /* XRX200_FDMA_IER_PCKT Packet Sent Interrupt Enable */
-+// {0x2914, 0, 16, 0x00}, /* XRX200_FDMA_ISR Fetch DMA Global InterruptStatus Register */
-+// {0x2914, 14, 1, 0x00}, /* XRX200_FDMA_ISR_PCKTD Packet Drop */
-+// {0x2914, 13, 1, 0x00}, /* XRX200_FDMA_ISR_PCKR Packet is Ready for Transmission */
-+// {0x2914, 0, 8, 0x00}, /* XRX200_FDMA_ISR_PCKT Packet Sent Event */
-+// {0x2A00, 0, 16, 0x18}, /* XRX200_FDMA_PCTRL Ethernet SwitchFetch DMA Port Control Register */
-+// {0x2A00, 3, 2, 0x18}, /* XRX200_FDMA_PCTRL_VLANMOD VLAN Modification Enable */
-+// {0x2A00, 2, 1, 0x18}, /* XRX200_FDMA_PCTRL_DSCPRM DSCP Re-marking Enable */
-+// {0x2A00, 1, 1, 0x18}, /* XRX200_FDMA_PCTRL_STEN Special Tag Insertion Enable */
-+// {0x2A00, 0, 1, 0x18}, /* XRX200_FDMA_PCTRL_EN FDMA Port Enable */
-+// {0x2A04, 0, 16, 0x18}, /* XRX200_FDMA_PRIO Ethernet SwitchFetch DMA Port Priority Register */
-+// {0x2A04, 0, 2, 0x18}, /* XRX200_FDMA_PRIO_PRIO FDMA PRIO */
-+// {0x2A08, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT0 Ethernet SwitchFetch DMA Port Status Register 0 */
-+// {0x2A08, 15, 1, 0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL Port Egress Packet Available */
-+// {0x2A08, 14, 1, 0x18}, /* XRX200_FDMA_PSTAT0_POK Port Status OK */
-+// {0x2A08, 0, 6, 0x18}, /* XRX200_FDMA_PSTAT0_PSEG Port Egress Segment Count */
-+// {0x2A0C, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT1_HDR Ethernet SwitchFetch DMA Port Status Register 1 */
-+// {0x2A0C, 0, 10, 0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR Header Pointer */
-+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0 Egress TimeStamp Register 0 */
-+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0_TSTL Time Stamp [15:0] */
-+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1 Egress TimeStamp Register 1 */
-+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1_TSTH Time Stamp [31:16] */
-+// {0x2D00, 0, 16, 0x00}, /* XRX200_SDMA_CTRL Ethernet Switch StoreDMA Control Register */
-+// {0x2D00, 0, 1, 0x00}, /* XRX200_SDMA_CTRL_TSTEN Time Stamp Enable */
-+// {0x2D04, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR1 SDMA Flow Control Threshold1 Register */
-+// {0x2D04, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR1_THR1 Threshold 1 */
-+// {0x2D08, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR2 SDMA Flow Control Threshold2 Register */
-+// {0x2D08, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR2_THR2 Threshold 2 */
-+// {0x2D0C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR3 SDMA Flow Control Threshold3 Register */
-+// {0x2D0C, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR3_THR3 Threshold 3 */
-+// {0x2D10, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR4 SDMA Flow Control Threshold4 Register */
-+// {0x2D10, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR4_THR4 Threshold 4 */
-+// {0x2D14, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR5 SDMA Flow Control Threshold5 Register */
-+// {0x2D14, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR5_THR5 Threshold 5 */
-+// {0x2D18, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR6 SDMA Flow Control Threshold6 Register */
-+// {0x2D18, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR6_THR6 Threshold 6 */
-+// {0x2D1C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR7 SDMA Flow Control Threshold7 Register */
-+// {0x2D1C, 0, 11, 0x00}, /* XRX200_SDMA_FCTHR7_THR7 Threshold 7 */
-+// {0x2D20, 0, 16, 0x00}, /* XRX200_SDMA_STAT_0 SDMA Status Register0 */
-+// {0x2D20, 4, 3, 0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL Back Pressure Status */
-+// {0x2D20, 2, 2, 0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT Back Pressure Status */
-+// {0x2D20, 0, 2, 0x00}, /* XRX200_SDMA_STAT_0_DROP Back Pressure Status */
-+// {0x2D24, 0, 16, 0x00}, /* XRX200_SDMA_STAT_1 SDMA Status Register1 */
-+// {0x2D24, 0, 10, 0x00}, /* XRX200_SDMA_STAT_1_FILL Buffer Filling Level */
-+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2 SDMA Status Register2 */
-+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2_FSMS FSM states status */
-+// {0x2D2C, 0, 16, 0x00}, /* XRX200_SDMA_IER SDMA Interrupt Enable Register */
-+// {0x2D2C, 15, 1, 0x00}, /* XRX200_SDMA_IER_BPEX Buffer Pointers Exceeded */
-+// {0x2D2C, 14, 1, 0x00}, /* XRX200_SDMA_IER_BFULL Buffer Full */
-+// {0x2D2C, 13, 1, 0x00}, /* XRX200_SDMA_IER_FERR Frame Error */
-+// {0x2D2C, 0, 8, 0x00}, /* XRX200_SDMA_IER_FRX Frame Received Successfully */
-+// {0x2D30, 0, 16, 0x00}, /* XRX200_SDMA_ISR SDMA Interrupt Status Register */
-+// {0x2D30, 15, 1, 0x00}, /* XRX200_SDMA_ISR_BPEX Packet Descriptors Exceeded */
-+// {0x2D30, 14, 1, 0x00}, /* XRX200_SDMA_ISR_BFULL Buffer Full */
-+// {0x2D30, 13, 1, 0x00}, /* XRX200_SDMA_ISR_FERR Frame Error */
-+// {0x2D30, 0, 8, 0x00}, /* XRX200_SDMA_ISR_FRX Frame Received Successfully */
-+// {0x2F00, 0, 16, 0x18}, /* XRX200_SDMA_PCTRL Ethernet SwitchStore DMA Port Control Register */
-+// {0x2F00, 13, 2, 0x18}, /* XRX200_SDMA_PCTRL_DTHR Drop Threshold Selection */
-+// {0x2F00, 11, 2, 0x18}, /* XRX200_SDMA_PCTRL_PTHR Pause Threshold Selection */
-+// {0x2F00, 10, 1, 0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD Forward PHY Error Frames */
-+// {0x2F00, 9, 1, 0x18}, /* XRX200_SDMA_PCTRL_ALGFWD Forward Alignment Error Frames */
-+// {0x2F00, 8, 1, 0x18}, /* XRX200_SDMA_PCTRL_LENFWD Forward Length Errored Frames */
-+// {0x2F00, 7, 1, 0x18}, /* XRX200_SDMA_PCTRL_OSFWD Forward Oversized Frames */
-+// {0x2F00, 6, 1, 0x18}, /* XRX200_SDMA_PCTRL_USFWD Forward Undersized Frames */
-+// {0x2F00, 5, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSIGN Ignore FCS Errors */
-+// {0x2F00, 4, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSFWD Forward FCS Errored Frames */
-+// {0x2F00, 3, 1, 0x18}, /* XRX200_SDMA_PCTRL_PAUFWD Pause Frame Forwarding */
-+// {0x2F00, 2, 1, 0x18}, /* XRX200_SDMA_PCTRL_MFCEN Metering Flow Control Enable */
-+// {0x2F00, 1, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCEN Flow Control Enable */
-+// {0x2F00, 0, 1, 0x18}, /* XRX200_SDMA_PCTRL_PEN Port Enable */
-+// {0x2F04, 0, 16, 0x18}, /* XRX200_SDMA_PRIO Ethernet SwitchStore DMA Port Priority Register */
-+// {0x2F04, 0, 2, 0x18}, /* XRX200_SDMA_PRIO_PRIO SDMA PRIO */
-+// {0x2F08, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT0_HDR Ethernet SwitchStore DMA Port Status Register 0 */
-+// {0x2F08, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR Port Ingress Queue Header Pointer */
-+// {0x2F0C, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT1 Ethernet SwitchStore DMA Port Status Register 1 */
-+// {0x2F0C, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT1_PPKT Port Ingress Packet Count */
-+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0 Ingress TimeStamp Register 0 */
-+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0_TSTL Time Stamp [15:0] */
-+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1 Ingress TimeStamp Register 1 */
-+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1_TSTH Time Stamp [31:16] */
-+};
-+
-+
---
-1.7.10.4
-
--- /dev/null
+From 0a63ab263725c427051a8bbaa0732b749627da27 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 7 Aug 2014 18:15:36 +0200
+Subject: [PATCH 23/36] NET: PHY: adds driver for lantiq PHY11G
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/phy/Kconfig | 5 +
+ drivers/net/phy/Makefile | 1 +
+ drivers/net/phy/lantiq.c | 231 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 237 insertions(+)
+ create mode 100644 drivers/net/phy/lantiq.c
+
+diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
+index 9b5d46c..f3724b1 100644
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -106,6 +106,11 @@ config MICREL_PHY
+ ---help---
+ Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
++config LANTIQ_PHY
++ tristate "Driver for Lantiq PHYs"
++ ---help---
++ Supports the 11G and 22E PHYs.
++
+ config FIXED_PHY
+ bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB=y
+diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
+index 9013dfa..b5e030f 100644
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -23,6 +23,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o
+ obj-$(CONFIG_DP83640_PHY) += dp83640.o
+ obj-$(CONFIG_STE10XP) += ste10Xp.o
+ obj-$(CONFIG_MICREL_PHY) += micrel.o
++obj-$(CONFIG_LANTIQ_PHY) += lantiq.o
+ obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
+ obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
+ obj-$(CONFIG_AT803X_PHY) += at803x.o
+diff --git a/drivers/net/phy/lantiq.c b/drivers/net/phy/lantiq.c
+new file mode 100644
+index 0000000..f109bb9
+--- /dev/null
++++ b/drivers/net/phy/lantiq.c
+@@ -0,0 +1,231 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
++ */
++
++#include <linux/module.h>
++#include <linux/phy.h>
++
++#define MII_MMDCTRL 0x0d
++#define MII_MMDDATA 0x0e
++
++#define MII_VR9_11G_IMASK 0x19 /* interrupt mask */
++#define MII_VR9_11G_ISTAT 0x1a /* interrupt status */
++
++#define INT_VR9_11G_WOL BIT(15) /* Wake-On-LAN */
++#define INT_VR9_11G_ANE BIT(11) /* Auto-Neg error */
++#define INT_VR9_11G_ANC BIT(10) /* Auto-Neg complete */
++#define INT_VR9_11G_ADSC BIT(5) /* Link auto-downspeed detect */
++#define INT_VR9_11G_DXMC BIT(2) /* Duplex mode change */
++#define INT_VR9_11G_LSPC BIT(1) /* Link speed change */
++#define INT_VR9_11G_LSTC BIT(0) /* Link state change */
++#define INT_VR9_11G_MASK (INT_VR9_11G_LSTC | INT_VR9_11G_ADSC)
++
++#define ADVERTISED_MPD BIT(10) /* Multi-port device */
++
++#define MMD_DEVAD 0x1f
++#define MMD_ACTYPE_SHIFT 14
++#define MMD_ACTYPE_ADDRESS (0 << MMD_ACTYPE_SHIFT)
++#define MMD_ACTYPE_DATA (1 << MMD_ACTYPE_SHIFT)
++#define MMD_ACTYPE_DATA_PI (2 << MMD_ACTYPE_SHIFT)
++#define MMD_ACTYPE_DATA_PIWR (3 << MMD_ACTYPE_SHIFT)
++
++static __maybe_unused int vr9_gphy_mmd_read(struct phy_device *phydev,
++ u16 regnum)
++{
++ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
++ phy_write(phydev, MII_MMDDATA, regnum);
++ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
++
++ return phy_read(phydev, MII_MMDDATA);
++}
++
++static __maybe_unused int vr9_gphy_mmd_write(struct phy_device *phydev,
++ u16 regnum, u16 val)
++{
++ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
++ phy_write(phydev, MII_MMDDATA, regnum);
++ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
++ phy_write(phydev, MII_MMDDATA, val);
++
++ return 0;
++}
++
++static int vr9_gphy_config_init(struct phy_device *phydev)
++{
++ int err;
++
++ dev_dbg(&phydev->dev, "%s\n", __func__);
++
++ /* Mask all interrupts */
++ err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
++ if (err)
++ return err;
++
++ /* Clear all pending interrupts */
++ phy_read(phydev, MII_VR9_11G_ISTAT);
++
++ vr9_gphy_mmd_write(phydev, 0x1e0, 0xc5);
++ vr9_gphy_mmd_write(phydev, 0x1e1, 0x67);
++ vr9_gphy_mmd_write(phydev, 0x1e2, 0x42);
++ vr9_gphy_mmd_write(phydev, 0x1e3, 0x10);
++ vr9_gphy_mmd_write(phydev, 0x1e4, 0x70);
++ vr9_gphy_mmd_write(phydev, 0x1e5, 0x03);
++ vr9_gphy_mmd_write(phydev, 0x1e6, 0x20);
++ vr9_gphy_mmd_write(phydev, 0x1e7, 0x00);
++ vr9_gphy_mmd_write(phydev, 0x1e8, 0x40);
++ vr9_gphy_mmd_write(phydev, 0x1e9, 0x20);
++
++ return 0;
++}
++
++static int vr9_gphy_config_aneg(struct phy_device *phydev)
++{
++ int reg, err;
++
++ /* Advertise as multi-port device */
++ reg = phy_read(phydev, MII_CTRL1000);
++ reg |= ADVERTISED_MPD;
++ err = phy_write(phydev, MII_CTRL1000, reg);
++ if (err)
++ return err;
++
++ return genphy_config_aneg(phydev);
++}
++
++static int vr9_gphy_ack_interrupt(struct phy_device *phydev)
++{
++ int reg;
++
++ /*
++ * Possible IRQ numbers:
++ * - IM3_IRL18 for GPHY0
++ * - IM3_IRL17 for GPHY1
++ *
++ * Due to a silicon bug IRQ lines are not really independent from
++ * each other. Sometimes the two lines are driven at the same time
++ * if only one GPHY core raises the interrupt.
++ */
++
++ reg = phy_read(phydev, MII_VR9_11G_ISTAT);
++
++ return (reg < 0) ? reg : 0;
++}
++
++static int vr9_gphy_did_interrupt(struct phy_device *phydev)
++{
++ int reg;
++
++ reg = phy_read(phydev, MII_VR9_11G_ISTAT);
++
++ return reg > 0;
++}
++
++static int vr9_gphy_config_intr(struct phy_device *phydev)
++{
++ int err;
++
++ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
++ err = phy_write(phydev, MII_VR9_11G_IMASK, INT_VR9_11G_MASK);
++ else
++ err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
++
++ return err;
++}
++
++static struct phy_driver lantiq_phy[] = {
++ {
++ .phy_id = 0xd565a400,
++ .phy_id_mask = 0xffffffff,
++ .name = "Lantiq XWAY PEF7071",
++ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
++ .flags = 0, /*PHY_HAS_INTERRUPT,*/
++ .config_init = vr9_gphy_config_init,
++ .config_aneg = vr9_gphy_config_aneg,
++ .read_status = genphy_read_status,
++ .ack_interrupt = vr9_gphy_ack_interrupt,
++ .did_interrupt = vr9_gphy_did_interrupt,
++ .config_intr = vr9_gphy_config_intr,
++ .driver = { .owner = THIS_MODULE },
++ }, {
++ .phy_id = 0x030260D0,
++ .phy_id_mask = 0xfffffff0,
++ .name = "Lantiq XWAY VR9 GPHY 11G v1.3",
++ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
++ .flags = 0, /*PHY_HAS_INTERRUPT,*/
++ .config_init = vr9_gphy_config_init,
++ .config_aneg = vr9_gphy_config_aneg,
++ .read_status = genphy_read_status,
++ .ack_interrupt = vr9_gphy_ack_interrupt,
++ .did_interrupt = vr9_gphy_did_interrupt,
++ .config_intr = vr9_gphy_config_intr,
++ .driver = { .owner = THIS_MODULE },
++ }, {
++ .phy_id = 0xd565a408,
++ .phy_id_mask = 0xfffffff8,
++ .name = "Lantiq XWAY VR9 GPHY 11G v1.4",
++ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
++ .flags = 0, /*PHY_HAS_INTERRUPT,*/
++ .config_init = vr9_gphy_config_init,
++ .config_aneg = vr9_gphy_config_aneg,
++ .read_status = genphy_read_status,
++ .ack_interrupt = vr9_gphy_ack_interrupt,
++ .did_interrupt = vr9_gphy_did_interrupt,
++ .config_intr = vr9_gphy_config_intr,
++ .driver = { .owner = THIS_MODULE },
++ }, {
++ .phy_id = 0xd565a418,
++ .phy_id_mask = 0xfffffff8,
++ .name = "Lantiq XWAY XRX PHY22F v1.4",
++ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
++ .flags = 0, /*PHY_HAS_INTERRUPT,*/
++ .config_init = vr9_gphy_config_init,
++ .config_aneg = vr9_gphy_config_aneg,
++ .read_status = genphy_read_status,
++ .ack_interrupt = vr9_gphy_ack_interrupt,
++ .did_interrupt = vr9_gphy_did_interrupt,
++ .config_intr = vr9_gphy_config_intr,
++ .driver = { .owner = THIS_MODULE },
++ },
++};
++
++static int __init ltq_phy_init(void)
++{
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) {
++ int err = phy_driver_register(&lantiq_phy[i]);
++ if (err)
++ pr_err("lantiq_phy: failed to load %s\n", lantiq_phy[i].name);
++ }
++
++ return 0;
++}
++
++static void __exit ltq_phy_exit(void)
++{
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++)
++ phy_driver_unregister(&lantiq_phy[i]);
++}
++
++module_init(ltq_phy_init);
++module_exit(ltq_phy_exit);
++
++MODULE_DESCRIPTION("Lantiq PHY drivers");
++MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
++MODULE_LICENSE("GPL");
+--
+1.7.10.4
+
+++ /dev/null
-From 2e265bc5154636daecf941acfea3087e7820877d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:38:50 +0100
-Subject: [PATCH 23/31] NET: multi phy support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/phy/phy.c | 9 ++++++---
- include/linux/phy.h | 1 +
- 2 files changed, 7 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
-index 76d96b9..371f0b6 100644
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -715,7 +715,8 @@ void phy_state_machine(struct work_struct *work)
- /* If the link is down, give up on negotiation for now */
- if (!phydev->link) {
- phydev->state = PHY_NOLINK;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- phydev->adjust_link(phydev->attached_dev);
- break;
- }
-@@ -781,7 +782,8 @@ void phy_state_machine(struct work_struct *work)
- netif_carrier_on(phydev->attached_dev);
- } else {
- phydev->state = PHY_NOLINK;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- }
-
- phydev->adjust_link(phydev->attached_dev);
-@@ -793,7 +795,8 @@ void phy_state_machine(struct work_struct *work)
- case PHY_HALTED:
- if (phydev->link) {
- phydev->link = 0;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- phydev->adjust_link(phydev->attached_dev);
- do_suspend = 1;
- }
-diff --git a/include/linux/phy.h b/include/linux/phy.h
-index 565188c..91b93f7 100644
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -308,6 +308,7 @@ struct phy_device {
- struct phy_c45_device_ids c45_ids;
- bool is_c45;
- bool is_internal;
-+ bool no_auto_carrier_off;
-
- enum phy_state state;
-
---
-1.7.10.4
-
+++ /dev/null
-From c4f036afb2016d21433c0214c55c01b8b9b7f4ee Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:40:01 +0100
-Subject: [PATCH 24/31] NET: add of_get_mac_address_mtd()
-
-Many embedded devices have information such as mac addresses stored inside mtd
-devices. This patch allows us to add a property inside a node describing a
-network interface. The new property points at a mtd partition with an offset
-where the mac address can be found.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/of/of_net.c | 37 +++++++++++++++++++++++++++++++++++++
- include/linux/of_net.h | 1 +
- 2 files changed, 38 insertions(+)
-
-diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
-index a208a45..de93111 100644
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -10,6 +10,7 @@
- #include <linux/of_net.h>
- #include <linux/phy.h>
- #include <linux/export.h>
-+#include <linux/mtd/mtd.h>
-
- /**
- * It maps 'enum phy_interface_t' found in include/linux/phy.h
-@@ -94,3 +95,39 @@ const void *of_get_mac_address(struct device_node *np)
- return NULL;
- }
- EXPORT_SYMBOL(of_get_mac_address);
-+
-+int of_get_mac_address_mtd(struct device_node *np, void *mac)
-+{
-+ struct device_node *mtd_np = NULL;
-+ size_t retlen;
-+ int size, ret;
-+ struct mtd_info *mtd;
-+ const char *part;
-+ const __be32 *list;
-+ phandle phandle;
-+
-+ list = of_get_property(np, "mtd-mac-address", &size);
-+ if (!list || (size != (2 * sizeof(*list))))
-+ return -ENOENT;
-+
-+ phandle = be32_to_cpup(list++);
-+ if (phandle)
-+ mtd_np = of_find_node_by_phandle(phandle);
-+
-+ if (!mtd_np)
-+ return -ENOENT;
-+
-+ part = of_get_property(mtd_np, "label", NULL);
-+ if (!part)
-+ part = mtd_np->name;
-+
-+ mtd = get_mtd_device_nm(part);
-+ if (IS_ERR(mtd))
-+ return PTR_ERR(mtd);
-+
-+ ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, (u_char *) mac);
-+ put_mtd_device(mtd);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(of_get_mac_address_mtd);
-diff --git a/include/linux/of_net.h b/include/linux/of_net.h
-index 34597c8..cdfbc60 100644
---- a/include/linux/of_net.h
-+++ b/include/linux/of_net.h
-@@ -11,6 +11,7 @@
- #include <linux/of.h>
- extern int of_get_phy_mode(struct device_node *np);
- extern const void *of_get_mac_address(struct device_node *np);
-+extern int of_get_mac_address_mtd(struct device_node *np, void *mac);
- #else
- static inline int of_get_phy_mode(struct device_node *np)
- {
---
-1.7.10.4
-
--- /dev/null
+From 77e89d5a28be35058041c79e9874ab26f222c603 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 22 Oct 2012 09:26:24 +0200
+Subject: [PATCH 24/36] NET: lantiq: adds PHY11G firmware blobs
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ firmware/Makefile | 4 +
+ firmware/lantiq/COPYING | 286 +++++++++++++++++++++++++++++++++++++++++++++++
+ firmware/lantiq/README | 45 ++++++++
+ 3 files changed, 335 insertions(+)
+ create mode 100644 firmware/lantiq/COPYING
+ create mode 100644 firmware/lantiq/README
+
+diff --git a/firmware/Makefile b/firmware/Makefile
+index cbb09ce..171ebab 100644
+--- a/firmware/Makefile
++++ b/firmware/Makefile
+@@ -134,6 +134,10 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
+ fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
+ fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
+ fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a1x.bin
++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a2x.bin
++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a1x.bin
++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a2x.bin
+ fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
+
+ fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
+diff --git a/firmware/lantiq/COPYING b/firmware/lantiq/COPYING
+new file mode 100644
+index 0000000..5ec70b2
+--- /dev/null
++++ b/firmware/lantiq/COPYING
+@@ -0,0 +1,286 @@
++All firmware files are copyrighted by Lantiq Deutschland GmbH.
++The files have been extracted from header files found in Lantiq BSPs.
++If not stated otherwise all files are licensed under GPL.
++
++=======================================================================
++
++ GNU GENERAL PUBLIC LICENSE
++ Version 2, June 1991
++
++ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
++ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ Everyone is permitted to copy and distribute verbatim copies
++ of this license document, but changing it is not allowed.
++
++ Preamble
++
++ The licenses for most software are designed to take away your
++freedom to share and change it. By contrast, the GNU General Public
++License is intended to guarantee your freedom to share and change free
++software--to make sure the software is free for all its users. This
++General Public License applies to most of the Free Software
++Foundation's software and to any other program whose authors commit to
++using it. (Some other Free Software Foundation software is covered by
++the GNU Library General Public License instead.) You can apply it to
++your programs, too.
++
++ When we speak of free software, we are referring to freedom, not
++price. Our General Public Licenses are designed to make sure that you
++have the freedom to distribute copies of free software (and charge for
++this service if you wish), that you receive source code or can get it
++if you want it, that you can change the software or use pieces of it
++in new free programs; and that you know you can do these things.
++
++ To protect your rights, we need to make restrictions that forbid
++anyone to deny you these rights or to ask you to surrender the rights.
++These restrictions translate to certain responsibilities for you if you
++distribute copies of the software, or if you modify it.
++
++ For example, if you distribute copies of such a program, whether
++gratis or for a fee, you must give the recipients all the rights that
++you have. You must make sure that they, too, receive or can get the
++source code. And you must show them these terms so they know their
++rights.
++
++ We protect your rights with two steps: (1) copyright the software, and
++(2) offer you this license which gives you legal permission to copy,
++distribute and/or modify the software.
++
++ Also, for each author's protection and ours, we want to make certain
++that everyone understands that there is no warranty for this free
++software. If the software is modified by someone else and passed on, we
++want its recipients to know that what they have is not the original, so
++that any problems introduced by others will not reflect on the original
++authors' reputations.
++
++ Finally, any free program is threatened constantly by software
++patents. We wish to avoid the danger that redistributors of a free
++program will individually obtain patent licenses, in effect making the
++program proprietary. To prevent this, we have made it clear that any
++patent must be licensed for everyone's free use or not licensed at all.
++
++ The precise terms and conditions for copying, distribution and
++modification follow.
++\f
++ GNU GENERAL PUBLIC LICENSE
++ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
++
++ 0. This License applies to any program or other work which contains
++a notice placed by the copyright holder saying it may be distributed
++under the terms of this General Public License. The "Program", below,
++refers to any such program or work, and a "work based on the Program"
++means either the Program or any derivative work under copyright law:
++that is to say, a work containing the Program or a portion of it,
++either verbatim or with modifications and/or translated into another
++language. (Hereinafter, translation is included without limitation in
++the term "modification".) Each licensee is addressed as "you".
++
++Activities other than copying, distribution and modification are not
++covered by this License; they are outside its scope. The act of
++running the Program is not restricted, and the output from the Program
++is covered only if its contents constitute a work based on the
++Program (independent of having been made by running the Program).
++Whether that is true depends on what the Program does.
++
++ 1. You may copy and distribute verbatim copies of the Program's
++source code as you receive it, in any medium, provided that you
++conspicuously and appropriately publish on each copy an appropriate
++copyright notice and disclaimer of warranty; keep intact all the
++notices that refer to this License and to the absence of any warranty;
++and give any other recipients of the Program a copy of this License
++along with the Program.
++
++You may charge a fee for the physical act of transferring a copy, and
++you may at your option offer warranty protection in exchange for a fee.
++
++ 2. You may modify your copy or copies of the Program or any portion
++of it, thus forming a work based on the Program, and copy and
++distribute such modifications or work under the terms of Section 1
++above, provided that you also meet all of these conditions:
++
++ a) You must cause the modified files to carry prominent notices
++ stating that you changed the files and the date of any change.
++
++ b) You must cause any work that you distribute or publish, that in
++ whole or in part contains or is derived from the Program or any
++ part thereof, to be licensed as a whole at no charge to all third
++ parties under the terms of this License.
++
++ c) If the modified program normally reads commands interactively
++ when run, you must cause it, when started running for such
++ interactive use in the most ordinary way, to print or display an
++ announcement including an appropriate copyright notice and a
++ notice that there is no warranty (or else, saying that you provide
++ a warranty) and that users may redistribute the program under
++ these conditions, and telling the user how to view a copy of this
++ License. (Exception: if the Program itself is interactive but
++ does not normally print such an announcement, your work based on
++ the Program is not required to print an announcement.)
++\f
++These requirements apply to the modified work as a whole. If
++identifiable sections of that work are not derived from the Program,
++and can be reasonably considered independent and separate works in
++themselves, then this License, and its terms, do not apply to those
++sections when you distribute them as separate works. But when you
++distribute the same sections as part of a whole which is a work based
++on the Program, the distribution of the whole must be on the terms of
++this License, whose permissions for other licensees extend to the
++entire whole, and thus to each and every part regardless of who wrote it.
++
++Thus, it is not the intent of this section to claim rights or contest
++your rights to work written entirely by you; rather, the intent is to
++exercise the right to control the distribution of derivative or
++collective works based on the Program.
++
++In addition, mere aggregation of another work not based on the Program
++with the Program (or with a work based on the Program) on a volume of
++a storage or distribution medium does not bring the other work under
++the scope of this License.
++
++ 3. You may copy and distribute the Program (or a work based on it,
++under Section 2) in object code or executable form under the terms of
++Sections 1 and 2 above provided that you also do one of the following:
++
++ a) Accompany it with the complete corresponding machine-readable
++ source code, which must be distributed under the terms of Sections
++ 1 and 2 above on a medium customarily used for software interchange; or,
++
++ b) Accompany it with a written offer, valid for at least three
++ years, to give any third party, for a charge no more than your
++ cost of physically performing source distribution, a complete
++ machine-readable copy of the corresponding source code, to be
++ distributed under the terms of Sections 1 and 2 above on a medium
++ customarily used for software interchange; or,
++
++ c) Accompany it with the information you received as to the offer
++ to distribute corresponding source code. (This alternative is
++ allowed only for noncommercial distribution and only if you
++ received the program in object code or executable form with such
++ an offer, in accord with Subsection b above.)
++
++The source code for a work means the preferred form of the work for
++making modifications to it. For an executable work, complete source
++code means all the source code for all modules it contains, plus any
++associated interface definition files, plus the scripts used to
++control compilation and installation of the executable. However, as a
++special exception, the source code distributed need not include
++anything that is normally distributed (in either source or binary
++form) with the major components (compiler, kernel, and so on) of the
++operating system on which the executable runs, unless that component
++itself accompanies the executable.
++
++If distribution of executable or object code is made by offering
++access to copy from a designated place, then offering equivalent
++access to copy the source code from the same place counts as
++distribution of the source code, even though third parties are not
++compelled to copy the source along with the object code.
++\f
++ 4. You may not copy, modify, sublicense, or distribute the Program
++except as expressly provided under this License. Any attempt
++otherwise to copy, modify, sublicense or distribute the Program is
++void, and will automatically terminate your rights under this License.
++However, parties who have received copies, or rights, from you under
++this License will not have their licenses terminated so long as such
++parties remain in full compliance.
++
++ 5. You are not required to accept this License, since you have not
++signed it. However, nothing else grants you permission to modify or
++distribute the Program or its derivative works. These actions are
++prohibited by law if you do not accept this License. Therefore, by
++modifying or distributing the Program (or any work based on the
++Program), you indicate your acceptance of this License to do so, and
++all its terms and conditions for copying, distributing or modifying
++the Program or works based on it.
++
++ 6. Each time you redistribute the Program (or any work based on the
++Program), the recipient automatically receives a license from the
++original licensor to copy, distribute or modify the Program subject to
++these terms and conditions. You may not impose any further
++restrictions on the recipients' exercise of the rights granted herein.
++You are not responsible for enforcing compliance by third parties to
++this License.
++
++ 7. If, as a consequence of a court judgment or allegation of patent
++infringement or for any other reason (not limited to patent issues),
++conditions are imposed on you (whether by court order, agreement or
++otherwise) that contradict the conditions of this License, they do not
++excuse you from the conditions of this License. If you cannot
++distribute so as to satisfy simultaneously your obligations under this
++License and any other pertinent obligations, then as a consequence you
++may not distribute the Program at all. For example, if a patent
++license would not permit royalty-free redistribution of the Program by
++all those who receive copies directly or indirectly through you, then
++the only way you could satisfy both it and this License would be to
++refrain entirely from distribution of the Program.
++
++If any portion of this section is held invalid or unenforceable under
++any particular circumstance, the balance of the section is intended to
++apply and the section as a whole is intended to apply in other
++circumstances.
++
++It is not the purpose of this section to induce you to infringe any
++patents or other property right claims or to contest validity of any
++such claims; this section has the sole purpose of protecting the
++integrity of the free software distribution system, which is
++implemented by public license practices. Many people have made
++generous contributions to the wide range of software distributed
++through that system in reliance on consistent application of that
++system; it is up to the author/donor to decide if he or she is willing
++to distribute software through any other system and a licensee cannot
++impose that choice.
++
++This section is intended to make thoroughly clear what is believed to
++be a consequence of the rest of this License.
++\f
++ 8. If the distribution and/or use of the Program is restricted in
++certain countries either by patents or by copyrighted interfaces, the
++original copyright holder who places the Program under this License
++may add an explicit geographical distribution limitation excluding
++those countries, so that distribution is permitted only in or among
++countries not thus excluded. In such case, this License incorporates
++the limitation as if written in the body of this License.
++
++ 9. The Free Software Foundation may publish revised and/or new versions
++of the General Public License from time to time. Such new versions will
++be similar in spirit to the present version, but may differ in detail to
++address new problems or concerns.
++
++Each version is given a distinguishing version number. If the Program
++specifies a version number of this License which applies to it and "any
++later version", you have the option of following the terms and conditions
++either of that version or of any later version published by the Free
++Software Foundation. If the Program does not specify a version number of
++this License, you may choose any version ever published by the Free Software
++Foundation.
++
++ 10. If you wish to incorporate parts of the Program into other free
++programs whose distribution conditions are different, write to the author
++to ask for permission. For software which is copyrighted by the Free
++Software Foundation, write to the Free Software Foundation; we sometimes
++make exceptions for this. Our decision will be guided by the two goals
++of preserving the free status of all derivatives of our free software and
++of promoting the sharing and reuse of software generally.
++
++ NO WARRANTY
++
++ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
++FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
++OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
++PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
++OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
++TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
++PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
++REPAIR OR CORRECTION.
++
++ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
++WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
++REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
++INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
++OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
++TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
++YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
++PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
++POSSIBILITY OF SUCH DAMAGES.
++
++ END OF TERMS AND CONDITIONS
+diff --git a/firmware/lantiq/README b/firmware/lantiq/README
+new file mode 100644
+index 0000000..1b666d4
+--- /dev/null
++++ b/firmware/lantiq/README
+@@ -0,0 +1,45 @@
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++# (C) Copyright 2007 - 2012
++# Lantiq Deutschland GmbH
++#
++# (C) Copyright 2012
++# Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
++#
++
++#
++# How to use
++#
++Configure kernel with:
++CONFIG_FW_LOADER=y
++CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR"
++CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES"
++
++where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list
++of space separated files from list below.
++
++#
++# Firmware files
++#
++
++# GPHY core on Lantiq XWAY VR9 v1.1
++lantiq/vr9_phy11g_a1x.bin
++lantiq/vr9_phy22f_a1x.bin
++
++# GPHY core on Lantiq XWAY VR9 v1.2
++lantiq/vr9_phy11g_a2x.bin
++lantiq/vr9_phy22f_a2x.bin
+--
+1.7.10.4
+
+++ /dev/null
-From 8d45ea02fc0e9b5edd7deaf564663f1ffe8bed64 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:22:19 +0200
-Subject: [PATCH 25/31] GPIO: MIPS: lantiq: add gpio driver for falcon SoC
-
-Add driver for GPIO blocks found on Lantiq FALCON SoC. The SoC has 5 banks of
-up to 32 pads. The GPIO blocks have a per pin IRQs.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Acked-by: John Crispin <blogic@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: linux-gpio@vger.kernel.org
----
- drivers/gpio/Kconfig | 5 +
- drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-falcon.c | 348 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 354 insertions(+)
- create mode 100644 drivers/gpio/gpio-falcon.c
-
-diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
-index 903f24d..670c064 100644
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -145,6 +145,11 @@ config GPIO_EP93XX
- depends on ARCH_EP93XX
- select GPIO_GENERIC
-
-+config GPIO_FALCON
-+ def_bool y
-+ depends on MIPS && SOC_FALCON
-+ select GPIO_GENERIC
-+
- config GPIO_MM_LANTIQ
- bool "Lantiq Memory mapped GPIOs"
- depends on LANTIQ && SOC_XWAY
-diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
-index 5d50179..c92db39 100644
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
- obj-$(CONFIG_GPIO_EM) += gpio-em.o
- obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
- obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
-+obj-$(CONFIG_GPIO_FALCON) += gpio-falcon.o
- obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
- obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
- obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
-diff --git a/drivers/gpio/gpio-falcon.c b/drivers/gpio/gpio-falcon.c
-new file mode 100644
-index 0000000..ae3bdfb
---- /dev/null
-+++ b/drivers/gpio/gpio-falcon.c
-@@ -0,0 +1,348 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/gpio.h>
-+#include <linux/interrupt.h>
-+#include <linux/slab.h>
-+#include <linux/export.h>
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/consumer.h>
-+#include <linux/platform_device.h>
-+
-+#include <lantiq_soc.h>
-+
-+/* Data Output Register */
-+#define GPIO_OUT 0x00000000
-+/* Data Input Register */
-+#define GPIO_IN 0x00000004
-+/* Direction Register */
-+#define GPIO_DIR 0x00000008
-+/* External Interrupt Control Register 0 */
-+#define GPIO_EXINTCR0 0x00000018
-+/* External Interrupt Control Register 1 */
-+#define GPIO_EXINTCR1 0x0000001C
-+/* IRN Capture Register */
-+#define GPIO_IRNCR 0x00000020
-+/* IRN Interrupt Configuration Register */
-+#define GPIO_IRNCFG 0x0000002C
-+/* IRN Interrupt Enable Set Register */
-+#define GPIO_IRNRNSET 0x00000030
-+/* IRN Interrupt Enable Clear Register */
-+#define GPIO_IRNENCLR 0x00000034
-+/* Output Set Register */
-+#define GPIO_OUTSET 0x00000040
-+/* Output Cler Register */
-+#define GPIO_OUTCLR 0x00000044
-+/* Direction Clear Register */
-+#define GPIO_DIRSET 0x00000048
-+/* Direction Set Register */
-+#define GPIO_DIRCLR 0x0000004C
-+
-+/* turn a gpio_chip into a falcon_gpio_port */
-+#define ctop(c) container_of(c, struct falcon_gpio_port, gpio_chip)
-+/* turn a irq_data into a falcon_gpio_port */
-+#define itop(i) ((struct falcon_gpio_port *) irq_get_chip_data(i->irq))
-+
-+#define port_r32(p, reg) ltq_r32(p->port + reg)
-+#define port_w32(p, val, reg) ltq_w32(val, p->port + reg)
-+#define port_w32_mask(p, clear, set, reg) \
-+ port_w32(p, (port_r32(p, reg) & ~(clear)) | (set), reg)
-+
-+#define MAX_BANKS 5
-+#define PINS_PER_PORT 32
-+
-+struct falcon_gpio_port {
-+ struct gpio_chip gpio_chip;
-+ void __iomem *port;
-+ unsigned int irq_base;
-+ unsigned int chained_irq;
-+ struct clk *clk;
-+ char name[6];
-+};
-+
-+static struct irq_chip falcon_gpio_irq_chip;
-+
-+static int falcon_gpio_direction_input(struct gpio_chip *chip,
-+ unsigned int offset)
-+{
-+ port_w32(ctop(chip), 1 << offset, GPIO_DIRCLR);
-+
-+ return 0;
-+}
-+
-+static void falcon_gpio_set(struct gpio_chip *chip, unsigned int offset,
-+ int value)
-+{
-+ if (value)
-+ port_w32(ctop(chip), 1 << offset, GPIO_OUTSET);
-+ else
-+ port_w32(ctop(chip), 1 << offset, GPIO_OUTCLR);
-+}
-+
-+static int falcon_gpio_direction_output(struct gpio_chip *chip,
-+ unsigned int offset, int value)
-+{
-+ falcon_gpio_set(chip, offset, value);
-+ port_w32(ctop(chip), 1 << offset, GPIO_DIRSET);
-+
-+ return 0;
-+}
-+
-+static int falcon_gpio_get(struct gpio_chip *chip, unsigned int offset)
-+{
-+ if ((port_r32(ctop(chip), GPIO_DIR) >> offset) & 1)
-+ return (port_r32(ctop(chip), GPIO_OUT) >> offset) & 1;
-+ else
-+ return (port_r32(ctop(chip), GPIO_IN) >> offset) & 1;
-+}
-+
-+static int falcon_gpio_request(struct gpio_chip *chip, unsigned offset)
-+{
-+ int gpio = chip->base + offset;
-+
-+ return pinctrl_request_gpio(gpio);
-+}
-+
-+static void falcon_gpio_free(struct gpio_chip *chip, unsigned offset)
-+{
-+ int gpio = chip->base + offset;
-+
-+ pinctrl_free_gpio(gpio);
-+}
-+
-+static int falcon_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-+{
-+ return ctop(chip)->irq_base + offset;
-+}
-+
-+static void falcon_gpio_disable_irq(struct irq_data *d)
-+{
-+ unsigned int offset = d->irq - itop(d)->irq_base;
-+
-+ port_w32(itop(d), 1 << offset, GPIO_IRNENCLR);
-+}
-+
-+static void falcon_gpio_enable_irq(struct irq_data *d)
-+{
-+ unsigned int offset = d->irq - itop(d)->irq_base;
-+
-+ port_w32(itop(d), 1 << offset, GPIO_IRNRNSET);
-+}
-+
-+static void falcon_gpio_ack_irq(struct irq_data *d)
-+{
-+ unsigned int offset = d->irq - itop(d)->irq_base;
-+
-+ port_w32(itop(d), 1 << offset, GPIO_IRNCR);
-+}
-+
-+static void falcon_gpio_mask_and_ack_irq(struct irq_data *d)
-+{
-+ unsigned int offset = d->irq - itop(d)->irq_base;
-+
-+ port_w32(itop(d), 1 << offset, GPIO_IRNENCLR);
-+ port_w32(itop(d), 1 << offset, GPIO_IRNCR);
-+}
-+
-+static int falcon_gpio_irq_type(struct irq_data *d, unsigned int type)
-+{
-+ unsigned int offset = d->irq - itop(d)->irq_base;
-+ unsigned int mask = 1 << offset;
-+
-+ if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE)
-+ return 0;
-+
-+ if ((type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) != 0) {
-+ /* level triggered */
-+ port_w32_mask(itop(d), 0, mask, GPIO_IRNCFG);
-+ irq_set_chip_and_handler_name(d->irq,
-+ &falcon_gpio_irq_chip, handle_level_irq, "mux");
-+ } else {
-+ /* edge triggered */
-+ port_w32_mask(itop(d), mask, 0, GPIO_IRNCFG);
-+ irq_set_chip_and_handler_name(d->irq,
-+ &falcon_gpio_irq_chip, handle_simple_irq, "mux");
-+ }
-+
-+ if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
-+ port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR0);
-+ port_w32_mask(itop(d), 0, mask, GPIO_EXINTCR1);
-+ } else {
-+ if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH)) != 0)
-+ /* positive logic: rising edge, high level */
-+ port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR0);
-+ else
-+ /* negative logic: falling edge, low level */
-+ port_w32_mask(itop(d), 0, mask, GPIO_EXINTCR0);
-+ port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR1);
-+ }
-+
-+ return gpio_direction_input(itop(d)->gpio_chip.base + offset);
-+}
-+
-+static void falcon_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-+{
-+ struct falcon_gpio_port *gpio_port = irq_desc_get_handler_data(desc);
-+ unsigned long irncr;
-+ int offset;
-+
-+ /* acknowledge interrupt */
-+ irncr = port_r32(gpio_port, GPIO_IRNCR);
-+ port_w32(gpio_port, irncr, GPIO_IRNCR);
-+
-+ desc->irq_data.chip->irq_ack(&desc->irq_data);
-+
-+ for_each_set_bit(offset, &irncr, gpio_port->gpio_chip.ngpio)
-+ generic_handle_irq(gpio_port->irq_base + offset);
-+}
-+
-+static int falcon_gpio_irq_map(struct irq_domain *d, unsigned int irq,
-+ irq_hw_number_t hw)
-+{
-+ struct falcon_gpio_port *port = d->host_data;
-+
-+ irq_set_chip_and_handler_name(irq, &falcon_gpio_irq_chip,
-+ handle_simple_irq, "mux");
-+ irq_set_chip_data(irq, port);
-+
-+ /* set to negative logic (falling edge, low level) */
-+ port_w32_mask(port, 0, 1 << hw, GPIO_EXINTCR0);
-+ return 0;
-+}
-+
-+static struct irq_chip falcon_gpio_irq_chip = {
-+ .name = "gpio_irq_mux",
-+ .irq_mask = falcon_gpio_disable_irq,
-+ .irq_unmask = falcon_gpio_enable_irq,
-+ .irq_ack = falcon_gpio_ack_irq,
-+ .irq_mask_ack = falcon_gpio_mask_and_ack_irq,
-+ .irq_set_type = falcon_gpio_irq_type,
-+};
-+
-+static const struct irq_domain_ops irq_domain_ops = {
-+ .xlate = irq_domain_xlate_onetwocell,
-+ .map = falcon_gpio_irq_map,
-+};
-+
-+static struct irqaction gpio_cascade = {
-+ .handler = no_action,
-+ .flags = IRQF_DISABLED,
-+ .name = "gpio_cascade",
-+};
-+
-+static int falcon_gpio_probe(struct platform_device *pdev)
-+{
-+ struct pinctrl_gpio_range *gpio_range;
-+ struct device_node *node = pdev->dev.of_node;
-+ const __be32 *bank = of_get_property(node, "lantiq,bank", NULL);
-+ struct falcon_gpio_port *gpio_port;
-+ struct resource *gpiores, irqres;
-+ int ret, size;
-+
-+ if (!bank || *bank >= MAX_BANKS)
-+ return -ENODEV;
-+
-+ size = pinctrl_falcon_get_range_size(*bank);
-+ if (size < 1) {
-+ dev_err(&pdev->dev, "pad not loaded for bank %d\n", *bank);
-+ return size;
-+ }
-+
-+ gpio_range = devm_kzalloc(&pdev->dev, sizeof(struct pinctrl_gpio_range),
-+ GFP_KERNEL);
-+ if (!gpio_range)
-+ return -ENOMEM;
-+
-+ gpio_port = devm_kzalloc(&pdev->dev, sizeof(struct falcon_gpio_port),
-+ GFP_KERNEL);
-+ if (!gpio_port)
-+ return -ENOMEM;
-+
-+ snprintf(gpio_port->name, 6, "gpio%d", *bank);
-+ gpio_port->gpio_chip.label = gpio_port->name;
-+ gpio_port->gpio_chip.direction_input = falcon_gpio_direction_input;
-+ gpio_port->gpio_chip.direction_output = falcon_gpio_direction_output;
-+ gpio_port->gpio_chip.get = falcon_gpio_get;
-+ gpio_port->gpio_chip.set = falcon_gpio_set;
-+ gpio_port->gpio_chip.request = falcon_gpio_request;
-+ gpio_port->gpio_chip.free = falcon_gpio_free;
-+ gpio_port->gpio_chip.base = *bank * PINS_PER_PORT;
-+ gpio_port->gpio_chip.ngpio = size;
-+ gpio_port->gpio_chip.dev = &pdev->dev;
-+
-+ gpiores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ gpio_port->port = devm_request_and_ioremap(&pdev->dev, gpiores);
-+ if (IS_ERR(gpio_port->port))
-+ return PTR_ERR(gpio_port->port);
-+
-+ gpio_port->clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(gpio_port->clk))
-+ return PTR_ERR(gpio_port->clk);
-+ clk_activate(gpio_port->clk);
-+
-+ if (of_irq_to_resource_table(node, &irqres, 1) == 1) {
-+ gpio_port->irq_base = INT_NUM_EXTRA_START + (32 * *bank);
-+ gpio_port->gpio_chip.to_irq = falcon_gpio_to_irq;
-+ gpio_port->chained_irq = irqres.start;
-+ irq_domain_add_legacy(node, size, gpio_port->irq_base, 0,
-+ &irq_domain_ops, gpio_port);
-+ setup_irq(irqres.start, &gpio_cascade);
-+ irq_set_handler_data(irqres.start, gpio_port);
-+ irq_set_chained_handler(irqres.start, falcon_gpio_irq_handler);
-+ }
-+
-+ ret = gpiochip_add(&gpio_port->gpio_chip);
-+ if (ret)
-+ return ret;
-+
-+ platform_set_drvdata(pdev, gpio_port);
-+
-+ gpio_range->name = "FALCON GPIO";
-+ gpio_range->id = *bank;
-+ gpio_range->base = gpio_port->gpio_chip.base;
-+ gpio_range->pin_base = gpio_port->gpio_chip.base;
-+ gpio_range->npins = gpio_port->gpio_chip.ngpio;
-+ gpio_range->gc = &gpio_port->gpio_chip;
-+
-+ pinctrl_falcon_add_gpio_range(gpio_range);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id falcon_gpio_match[] = {
-+ { .compatible = "lantiq,falcon-gpio" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, falcon_gpio_match);
-+
-+static struct platform_driver falcon_gpio_driver = {
-+ .probe = falcon_gpio_probe,
-+ .driver = {
-+ .name = "gpio-falcon",
-+ .owner = THIS_MODULE,
-+ .of_match_table = falcon_gpio_match,
-+ },
-+};
-+
-+int __init falcon_gpio_init(void)
-+{
-+ int ret;
-+
-+ pr_info("FALC(tm) ON GPIO Driver, (C) 2012 Lantiq Deutschland Gmbh\n");
-+ ret = platform_driver_register(&falcon_gpio_driver);
-+ if (ret)
-+ pr_err("falcon_gpio: Error registering platform driver!");
-+ return ret;
-+}
-+
-+subsys_initcall(falcon_gpio_init);
---
-1.7.10.4
-
--- /dev/null
+From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 22 Oct 2012 12:22:23 +0200
+Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+
+---
+ drivers/net/ethernet/Kconfig | 8 +-
+ drivers/net/ethernet/Makefile | 1 +
+ drivers/net/ethernet/lantiq_pce.h | 163 +++
+ drivers/net/ethernet/lantiq_xrx200.c | 1798 +++++++++++++++++++++++++++++++
+ drivers/net/ethernet/lantiq_xrx200_sw.h | 1328 +++++++++++++++++++++++
+ 5 files changed, 3297 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/net/ethernet/lantiq_pce.h
+ create mode 100644 drivers/net/ethernet/lantiq_xrx200.c
+ create mode 100644 drivers/net/ethernet/lantiq_xrx200_sw.h
+
+diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
+index 506b024..0a0dbe6 100644
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -84,7 +84,13 @@ config LANTIQ_ETOP
+ tristate "Lantiq SoC ETOP driver"
+ depends on SOC_TYPE_XWAY
+ ---help---
+- Support for the MII0 inside the Lantiq SoC
++ Support for the MII0 inside the Lantiq ADSL SoC
++
++config LANTIQ_XRX200
++ tristate "Lantiq SoC XRX200 driver"
++ depends on SOC_TYPE_XWAY
++ ---help---
++ Support for the MII0 inside the Lantiq VDSL SoC
+
+ source "drivers/net/ethernet/marvell/Kconfig"
+ source "drivers/net/ethernet/mellanox/Kconfig"
+diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
+index c0b8789..459cce8 100644
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -38,6 +38,7 @@ obj-$(CONFIG_IP1000) += icplus/
+ obj-$(CONFIG_JME) += jme.o
+ obj-$(CONFIG_KORINA) += korina.o
+ obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
++obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o
+ obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
+ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
+ obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
+diff --git a/drivers/net/ethernet/lantiq_pce.h b/drivers/net/ethernet/lantiq_pce.h
+new file mode 100644
+index 0000000..0c38efe
+--- /dev/null
++++ b/drivers/net/ethernet/lantiq_pce.h
+@@ -0,0 +1,163 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2010 Lantiq Deutschland GmbH
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ *
++ * PCE microcode extracted from UGW5.2 switch api
++ */
++
++/* Switch API Micro Code V0.3 */
++enum {
++ OUT_MAC0 = 0,
++ OUT_MAC1,
++ OUT_MAC2,
++ OUT_MAC3,
++ OUT_MAC4,
++ OUT_MAC5,
++ OUT_ETHTYP,
++ OUT_VTAG0,
++ OUT_VTAG1,
++ OUT_ITAG0,
++ OUT_ITAG1, /*10 */
++ OUT_ITAG2,
++ OUT_ITAG3,
++ OUT_IP0,
++ OUT_IP1,
++ OUT_IP2,
++ OUT_IP3,
++ OUT_SIP0,
++ OUT_SIP1,
++ OUT_SIP2,
++ OUT_SIP3, /*20*/
++ OUT_SIP4,
++ OUT_SIP5,
++ OUT_SIP6,
++ OUT_SIP7,
++ OUT_DIP0,
++ OUT_DIP1,
++ OUT_DIP2,
++ OUT_DIP3,
++ OUT_DIP4,
++ OUT_DIP5, /*30*/
++ OUT_DIP6,
++ OUT_DIP7,
++ OUT_SESID,
++ OUT_PROT,
++ OUT_APP0,
++ OUT_APP1,
++ OUT_IGMP0,
++ OUT_IGMP1,
++ OUT_IPOFF, /*39*/
++ OUT_NONE = 63
++};
++
++/* parser's microcode length type */
++#define INSTR 0
++#define IPV6 1
++#define LENACCU 2
++
++/* parser's microcode flag type */
++enum {
++ FLAG_ITAG = 0,
++ FLAG_VLAN,
++ FLAG_SNAP,
++ FLAG_PPPOE,
++ FLAG_IPV6,
++ FLAG_IPV6FL,
++ FLAG_IPV4,
++ FLAG_IGMP,
++ FLAG_TU,
++ FLAG_HOP,
++ FLAG_NN1, /*10 */
++ FLAG_NN2,
++ FLAG_END,
++ FLAG_NO, /*13*/
++};
++
++/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */
++#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \
++ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }}
++struct pce_microcode {
++ unsigned short val[4];
++/* unsigned short val_2;
++ unsigned short val_1;
++ unsigned short val_0;*/
++} pce_microcode[] = {
++ /* value mask ns fields L type flags ipv4_len */
++ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0),
++ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
++ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
++ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
++ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0),
++ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1),
++ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0),
++ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0),
++ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0),
++ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0),
++ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0),
++ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0),
++ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0),
++ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++};
+diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c
+new file mode 100644
+index 0000000..2da9d47
+--- /dev/null
++++ b/drivers/net/ethernet/lantiq_xrx200.c
+@@ -0,0 +1,1798 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2010 Lantiq Deutschland
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/switch.h>
++#include <linux/etherdevice.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/interrupt.h>
++#include <linux/clk.h>
++#include <asm/delay.h>
++
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++#include <linux/of_gpio.h>
++
++#include <xway_dma.h>
++#include <lantiq_soc.h>
++
++#include "lantiq_pce.h"
++#include "lantiq_xrx200_sw.h"
++
++#define SW_POLLING
++#define SW_ROUTING
++#define SW_PORTMAP
++
++#ifdef SW_ROUTING
++ #ifdef SW_PORTMAP
++#define XRX200_MAX_DEV 2
++ #else
++#define XRX200_MAX_DEV 2
++ #endif
++#else
++#define XRX200_MAX_DEV 1
++#endif
++
++#define XRX200_MAX_VLAN 64
++#define XRX200_PCE_ACTVLAN_IDX 0x01
++#define XRX200_PCE_VLANMAP_IDX 0x02
++
++#define XRX200_MAX_PORT 7
++#define XRX200_MAX_DMA 8
++
++#define XRX200_HEADROOM 4
++
++#define XRX200_TX_TIMEOUT (10 * HZ)
++
++/* port type */
++#define XRX200_PORT_TYPE_PHY 1
++#define XRX200_PORT_TYPE_MAC 2
++
++/* DMA */
++#define XRX200_DMA_DATA_LEN 0x600
++#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0
++#define XRX200_DMA_RX 0
++#define XRX200_DMA_TX 1
++#define XRX200_DMA_IS_TX(x) (x%2)
++#define XRX200_DMA_IS_RX(x) (!XRX200_DMA_IS_TX(x))
++
++/* fetch / store dma */
++#define FDMA_PCTRL0 0x2A00
++#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18))
++#define SDMA_PCTRL0 0x2F00
++#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18))
++
++/* buffer management */
++#define BM_PCFG0 0x200
++#define BM_PCFGx(x) (BM_PCFG0 + (x * 8))
++
++/* MDIO */
++#define MDIO_GLOB 0x0000
++#define MDIO_CTRL 0x0020
++#define MDIO_READ 0x0024
++#define MDIO_WRITE 0x0028
++#define MDIO_PHY0 0x0054
++#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned)))
++#define MDIO_CLK_CFG0 0x002C
++#define MDIO_CLK_CFG1 0x0030
++
++#define MDIO_GLOB_ENABLE 0x8000
++#define MDIO_BUSY BIT(12)
++#define MDIO_RD BIT(11)
++#define MDIO_WR BIT(10)
++#define MDIO_MASK 0x1f
++#define MDIO_ADDRSHIFT 5
++#define MDIO1_25MHZ 9
++
++#define MDIO_PHY_LINK_DOWN 0x4000
++#define MDIO_PHY_LINK_UP 0x2000
++
++#define MDIO_PHY_SPEED_M10 0x0000
++#define MDIO_PHY_SPEED_M100 0x0800
++#define MDIO_PHY_SPEED_G1 0x1000
++
++#define MDIO_PHY_FDUP_EN 0x0200
++#define MDIO_PHY_FDUP_DIS 0x0600
++
++#define MDIO_PHY_LINK_MASK 0x6000
++#define MDIO_PHY_SPEED_MASK 0x1800
++#define MDIO_PHY_FDUP_MASK 0x0600
++#define MDIO_PHY_ADDR_MASK 0x001f
++#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \
++ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK
++
++/* MII */
++#define MII_CFG(p) (p * 8)
++
++#define MII_CFG_EN BIT(14)
++
++#define MII_CFG_MODE_MIIP 0x0
++#define MII_CFG_MODE_MIIM 0x1
++#define MII_CFG_MODE_RMIIP 0x2
++#define MII_CFG_MODE_RMIIM 0x3
++#define MII_CFG_MODE_RGMII 0x4
++#define MII_CFG_MODE_MASK 0xf
++
++#define MII_CFG_RATE_M2P5 0x00
++#define MII_CFG_RATE_M25 0x10
++#define MII_CFG_RATE_M125 0x20
++#define MII_CFG_RATE_M50 0x30
++#define MII_CFG_RATE_AUTO 0x40
++#define MII_CFG_RATE_MASK 0x70
++
++/* cpu port mac */
++#define PMAC_HD_CTL 0x0000
++#define PMAC_RX_IPG 0x0024
++#define PMAC_EWAN 0x002c
++
++#define PMAC_IPG_MASK 0xf
++#define PMAC_HD_CTL_AS 0x0008
++#define PMAC_HD_CTL_AC 0x0004
++#define PMAC_HD_CTL_RXSH 0x0040
++#define PMAC_HD_CTL_AST 0x0080
++#define PMAC_HD_CTL_RST 0x0100
++
++/* PCE */
++#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4))
++#define PCE_TBL_MASK 0x1120
++#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4))
++#define PCE_TBL_ADDR 0x1138
++#define PCE_TBL_CTRL 0x113c
++#define PCE_PMAP1 0x114c
++#define PCE_PMAP2 0x1150
++#define PCE_PMAP3 0x1154
++#define PCE_GCTRL_REG(x) (0x1158 + (x * 4))
++#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4))
++
++#define PCE_TBL_BUSY BIT(15)
++#define PCE_TBL_CFG_ADDR_MASK 0x1f
++#define PCE_TBL_CFG_ADWR 0x20
++#define PCE_TBL_CFG_ADWR_MASK 0x60
++#define PCE_INGRESS BIT(11)
++
++/* MAC */
++#define MAC_FLEN_REG (0x2314)
++#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4))
++
++/* buffer management */
++#define BM_PCFG(p) (0x200 + (p * 8))
++
++/* special tag in TX path header */
++#define SPID_SHIFT 24
++#define DPID_SHIFT 16
++#define DPID_ENABLE 1
++#define SPID_CPU_PORT 2
++#define PORT_MAP_SEL BIT(15)
++#define PORT_MAP_EN BIT(14)
++#define PORT_MAP_SHIFT 1
++#define PORT_MAP_MASK 0x3f
++
++#define SPPID_MASK 0x7
++#define SPPID_SHIFT 4
++
++/* MII regs not yet in linux */
++#define MDIO_DEVAD_NONE (-1)
++#define ADVERTIZE_MPD (1 << 10)
++
++struct xrx200_port {
++ u8 num;
++ u8 phy_addr;
++ u16 flags;
++ phy_interface_t phy_if;
++
++ int link;
++ int gpio;
++ enum of_gpio_flags gpio_flags;
++
++ struct phy_device *phydev;
++ struct device_node *phy_node;
++};
++
++struct xrx200_chan {
++ int idx;
++ int refcount;
++ int tx_free;
++
++ struct net_device dummy_dev;
++ struct net_device *devs[XRX200_MAX_DEV];
++
++ struct tasklet_struct tasklet;
++ struct napi_struct napi;
++ struct ltq_dma_channel dma;
++ struct sk_buff *skb[LTQ_DESC_NUM];
++};
++
++struct xrx200_hw {
++ struct clk *clk;
++ struct mii_bus *mii_bus;
++
++ struct xrx200_chan chan[XRX200_MAX_DMA];
++
++ struct net_device *devs[XRX200_MAX_DEV];
++ int num_devs;
++
++ int port_map[XRX200_MAX_PORT];
++ unsigned short wan_map;
++
++ spinlock_t lock;
++
++ struct switch_dev swdev;
++};
++
++struct xrx200_priv {
++ struct net_device_stats stats;
++ int id;
++
++ struct xrx200_port port[XRX200_MAX_PORT];
++ int num_port;
++ bool wan;
++ bool sw;
++ unsigned short port_map;
++ unsigned char mac[6];
++
++ struct xrx200_hw *hw;
++};
++
++static __iomem void *xrx200_switch_membase;
++static __iomem void *xrx200_mii_membase;
++static __iomem void *xrx200_mdio_membase;
++static __iomem void *xrx200_pmac_membase;
++
++#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x))
++#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y))
++#define ltq_switch_w32_mask(x, y, z) \
++ ltq_w32_mask(x, y, xrx200_switch_membase + (z))
++
++#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x))
++#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y))
++#define ltq_mdio_w32_mask(x, y, z) \
++ ltq_w32_mask(x, y, xrx200_mdio_membase + (z))
++
++#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x))
++#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y))
++#define ltq_mii_w32_mask(x, y, z) \
++ ltq_w32_mask(x, y, xrx200_mii_membase + (z))
++
++#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x))
++#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y))
++#define ltq_pmac_w32_mask(x, y, z) \
++ ltq_w32_mask(x, y, xrx200_pmac_membase + (z))
++
++#define XRX200_GLOBAL_REGATTR(reg) \
++ .id = reg, \
++ .type = SWITCH_TYPE_INT, \
++ .set = xrx200_set_global_attr, \
++ .get = xrx200_get_global_attr
++
++#define XRX200_PORT_REGATTR(reg) \
++ .id = reg, \
++ .type = SWITCH_TYPE_INT, \
++ .set = xrx200_set_port_attr, \
++ .get = xrx200_get_port_attr
++
++static int xrx200sw_read_x(int reg, int x)
++{
++ int value, mask, addr;
++
++ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
++ value = ltq_switch_r32(addr);
++ mask = (1 << xrx200sw_reg[reg].size) - 1;
++ value = (value >> xrx200sw_reg[reg].shift);
++
++ return (value & mask);
++}
++
++static int xrx200sw_read(int reg)
++{
++ return xrx200sw_read_x(reg, 0);
++}
++
++static void xrx200sw_write_x(int value, int reg, int x)
++{
++ int mask, addr;
++
++ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
++ mask = (1 << xrx200sw_reg[reg].size) - 1;
++ mask = (mask << xrx200sw_reg[reg].shift);
++ value = (value << xrx200sw_reg[reg].shift) & mask;
++
++ ltq_switch_w32_mask(mask, value, addr);
++}
++
++static void xrx200sw_write(int value, int reg)
++{
++ xrx200sw_write_x(value, reg, 0);
++}
++
++struct xrx200_pce_table_entry {
++ int index; // PCE_TBL_ADDR.ADDR = pData->table_index
++ int table; // PCE_TBL_CTRL.ADDR = pData->table
++ unsigned short key[8];
++ unsigned short val[5];
++ unsigned short mask;
++ unsigned short type;
++ unsigned short valid;
++ unsigned short gmap;
++};
++
++static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl)
++{
++ // wait until hardware is ready
++ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
++
++ // prepare the table access:
++ // PCE_TBL_ADDR.ADDR = pData->table_index
++ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
++ // PCE_TBL_CTRL.ADDR = pData->table
++ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
++
++ //(address-based read)
++ xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
++
++ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
++
++ // wait until hardware is ready
++ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
++
++ // read the keys
++ tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7);
++ tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6);
++ tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5);
++ tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4);
++ tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3);
++ tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2);
++ tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1);
++ tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0);
++
++ // read the values
++ tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4);
++ tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3);
++ tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2);
++ tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1);
++ tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0);
++
++ // read the mask
++ tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0);
++ // read the type
++ tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE);
++ // read the valid flag
++ tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD);
++ // read the group map
++ tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP);
++
++ return 0;
++}
++
++static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl)
++{
++ // wait until hardware is ready
++ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
++
++ // prepare the table access:
++ // PCE_TBL_ADDR.ADDR = pData->table_index
++ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
++ // PCE_TBL_CTRL.ADDR = pData->table
++ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
++
++ //(address-based write)
++ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
++
++ // read the keys
++ xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7);
++ xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6);
++ xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5);
++ xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4);
++ xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3);
++ xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2);
++ xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1);
++ xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0);
++
++ // read the values
++ xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4);
++ xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3);
++ xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2);
++ xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1);
++ xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0);
++
++ // read the mask
++ xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0);
++ // read the type
++ xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE);
++ // read the valid flag
++ xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD);
++ // read the group map
++ xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP);
++
++ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
++
++ // wait until hardware is ready
++ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
++
++ return 0;
++}
++
++static void xrx200sw_fixup_pvids(void)
++{
++ int index, p, portmap, untagged;
++ struct xrx200_pce_table_entry tem;
++ struct xrx200_pce_table_entry tev;
++
++ portmap = 0;
++ for (p = 0; p < XRX200_MAX_PORT; p++)
++ portmap |= BIT(p);
++
++ tem.table = XRX200_PCE_VLANMAP_IDX;
++ tev.table = XRX200_PCE_ACTVLAN_IDX;
++
++ for (index = XRX200_MAX_VLAN; index-- > 0;)
++ {
++ tev.index = index;
++ xrx200_pce_table_entry_read(&tev);
++
++ if (tev.valid == 0)
++ continue;
++
++ tem.index = index;
++ xrx200_pce_table_entry_read(&tem);
++
++ if (tem.val[0] == 0)
++ continue;
++
++ untagged = portmap & (tem.val[1] ^ tem.val[2]);
++
++ for (p = 0; p < XRX200_MAX_PORT; p++)
++ if (untagged & BIT(p))
++ {
++ portmap &= ~BIT(p);
++ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
++ }
++
++ for (p = 0; p < XRX200_MAX_PORT; p++)
++ if (portmap & BIT(p))
++ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
++ }
++}
++
++// swconfig interface
++static void xrx200_hw_init(struct xrx200_hw *hw);
++
++// global
++static int xrx200sw_reset_switch(struct switch_dev *dev)
++{
++ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
++
++ xrx200_hw_init(hw);
++
++ return 0;
++}
++
++static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
++{
++ int p;
++
++ if ((attr->max > 0) && (val->value.i > attr->max))
++ return -EINVAL;
++
++ for (p = 0; p < XRX200_MAX_PORT; p++) {
++ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p);
++ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p);
++ }
++
++ xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN);
++ return 0;
++}
++
++static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
++{
++ val->value.i = xrx200sw_read(attr->id);
++ return 0;
++}
++
++static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
++{
++ if ((attr->max > 0) && (val->value.i > attr->max))
++ return -EINVAL;
++
++ xrx200sw_write(val->value.i, attr->id);
++ return 0;
++}
++
++static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
++{
++ val->value.i = xrx200sw_read(attr->id);
++ return 0;
++}
++
++// vlan
++static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ int i;
++ struct xrx200_pce_table_entry tev;
++ struct xrx200_pce_table_entry tem;
++
++ tev.table = XRX200_PCE_ACTVLAN_IDX;
++
++ for (i = 0; i < XRX200_MAX_VLAN; i++)
++ {
++ tev.index = i;
++ xrx200_pce_table_entry_read(&tev);
++ if (tev.key[0] == val->value.i && i != val->port_vlan)
++ return -EINVAL;
++ }
++
++ tev.index = val->port_vlan;
++ xrx200_pce_table_entry_read(&tev);
++ tev.key[0] = val->value.i;
++ tev.valid = val->value.i > 0;
++ xrx200_pce_table_entry_write(&tev);
++
++ tem.table = XRX200_PCE_VLANMAP_IDX;
++ tem.index = val->port_vlan;
++ xrx200_pce_table_entry_read(&tem);
++ tem.val[0] = val->value.i;
++ xrx200_pce_table_entry_write(&tem);
++
++ xrx200sw_fixup_pvids();
++ return 0;
++}
++
++static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct xrx200_pce_table_entry te;
++
++ te.table = XRX200_PCE_ACTVLAN_IDX;
++ te.index = val->port_vlan;
++ xrx200_pce_table_entry_read(&te);
++ val->value.i = te.key[0];
++
++ return 0;
++}
++
++static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ int i, portmap, tagmap, untagged;
++ struct xrx200_pce_table_entry tem;
++
++ portmap = 0;
++ tagmap = 0;
++ for (i = 0; i < val->len; i++)
++ {
++ struct switch_port *p = &val->value.ports[i];
++
++ portmap |= (1 << p->id);
++ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
++ tagmap |= (1 << p->id);
++ }
++
++ tem.table = XRX200_PCE_VLANMAP_IDX;
++
++ untagged = portmap ^ tagmap;
++ for (i = 0; i < XRX200_MAX_VLAN; i++)
++ {
++ tem.index = i;
++ xrx200_pce_table_entry_read(&tem);
++
++ if (tem.val[0] == 0)
++ continue;
++
++ if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i))
++ return -EINVAL;
++ }
++
++ tem.index = val->port_vlan;
++ xrx200_pce_table_entry_read(&tem);
++
++ // auto-enable this vlan if not enabled already
++ if (tem.val[0] == 0)
++ {
++ struct switch_val v;
++ v.port_vlan = val->port_vlan;
++ v.value.i = val->port_vlan;
++ if(xrx200sw_set_vlan_vid(dev, NULL, &v))
++ return -EINVAL;
++
++ //read updated tem
++ tem.index = val->port_vlan;
++ xrx200_pce_table_entry_read(&tem);
++ }
++
++ tem.val[1] = portmap;
++ tem.val[2] = tagmap;
++ xrx200_pce_table_entry_write(&tem);
++
++ xrx200sw_fixup_pvids();
++
++ return 0;
++}
++
++static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ int i;
++ unsigned short ports, tags;
++ struct xrx200_pce_table_entry tem;
++
++ tem.table = XRX200_PCE_VLANMAP_IDX;
++ tem.index = val->port_vlan;
++ xrx200_pce_table_entry_read(&tem);
++
++ ports = tem.val[1];
++ tags = tem.val[2];
++
++ for (i = 0; i < XRX200_MAX_PORT; i++) {
++ struct switch_port *p;
++
++ if (!(ports & (1 << i)))
++ continue;
++
++ p = &val->value.ports[val->len++];
++ p->id = i;
++ if (tags & (1 << i))
++ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
++ else
++ p->flags = 0;
++ }
++
++ return 0;
++}
++
++static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct xrx200_pce_table_entry tev;
++
++ tev.table = XRX200_PCE_ACTVLAN_IDX;
++ tev.index = val->port_vlan;
++ xrx200_pce_table_entry_read(&tev);
++
++ if (tev.key[0] == 0)
++ return -EINVAL;
++
++ tev.valid = val->value.i;
++ xrx200_pce_table_entry_write(&tev);
++
++ xrx200sw_fixup_pvids();
++ return 0;
++}
++
++static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct xrx200_pce_table_entry tev;
++
++ tev.table = XRX200_PCE_ACTVLAN_IDX;
++ tev.index = val->port_vlan;
++ xrx200_pce_table_entry_read(&tev);
++ val->value.i = tev.valid;
++
++ return 0;
++}
++
++// port
++static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val)
++{
++ struct xrx200_pce_table_entry tev;
++
++ if (port >= XRX200_MAX_PORT)
++ return -EINVAL;
++
++ tev.table = XRX200_PCE_ACTVLAN_IDX;
++ tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port);
++ xrx200_pce_table_entry_read(&tev);
++
++ *val = tev.key[0];
++ return 0;
++}
++
++static int xrx200sw_get_port_link(struct switch_dev *dev,
++ int port,
++ struct switch_port_link *link)
++{
++ if (port >= XRX200_MAX_PORT)
++ return -EINVAL;
++
++ link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port);
++ if (!link->link)
++ return 0;
++
++ link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port);
++
++ link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010);
++ link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020);
++ link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port));
++
++ link->speed = SWITCH_PORT_SPEED_10;
++ if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port))
++ link->speed = SWITCH_PORT_SPEED_100;
++ if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port))
++ link->speed = SWITCH_PORT_SPEED_1000;
++
++ return 0;
++}
++
++static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
++{
++ printk("%s %s(%d)\n", __FILE__, __func__, __LINE__);
++ if (val->port_vlan >= XRX200_MAX_PORT)
++ return -EINVAL;
++
++ if ((attr->max > 0) && (val->value.i > attr->max))
++ return -EINVAL;
++
++ xrx200sw_write_x(val->value.i, attr->id, val->port_vlan);
++ return 0;
++}
++
++static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
++{
++ if (val->port_vlan >= XRX200_MAX_PORT)
++ return -EINVAL;
++
++ val->value.i = xrx200sw_read_x(attr->id, val->port_vlan);
++ return 0;
++}
++
++// attributes
++static struct switch_attr xrx200sw_globals[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .set = xrx200_set_vlan_mode_enable,
++ .get = xrx200_get_vlan_mode_enable,
++ .name = "enable_vlan",
++ .description = "Enable VLAN mode",
++ .max = 1},
++};
++
++static struct switch_attr xrx200sw_port[] = {
++ {
++ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR),
++ .name = "uvr",
++ .description = "Unknown VLAN Rule",
++ .max = 1,
++ },
++ {
++ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR),
++ .name = "vsr",
++ .description = "VLAN Security Rule",
++ .max = 1,
++ },
++ {
++ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR),
++ .name = "vinr",
++ .description = "VLAN Ingress Tag Rule",
++ .max = 2,
++ },
++ {
++ XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM),
++ .name = "tvm",
++ .description = "Transparent VLAN Mode",
++ .max = 1,
++ },
++};
++
++static struct switch_attr xrx200sw_vlan[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "vid",
++ .description = "VLAN ID (0-4094)",
++ .set = xrx200sw_set_vlan_vid,
++ .get = xrx200sw_get_vlan_vid,
++ .max = 4094,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable",
++ .description = "Enable VLAN",
++ .set = xrx200sw_set_vlan_enable,
++ .get = xrx200sw_get_vlan_enable,
++ .max = 1,
++ },
++};
++
++static const struct switch_dev_ops xrx200sw_ops = {
++ .attr_global = {
++ .attr = xrx200sw_globals,
++ .n_attr = ARRAY_SIZE(xrx200sw_globals),
++ },
++ .attr_port = {
++ .attr = xrx200sw_port,
++ .n_attr = ARRAY_SIZE(xrx200sw_port),
++ },
++ .attr_vlan = {
++ .attr = xrx200sw_vlan,
++ .n_attr = ARRAY_SIZE(xrx200sw_vlan),
++ },
++ .get_vlan_ports = xrx200sw_get_vlan_ports,
++ .set_vlan_ports = xrx200sw_set_vlan_ports,
++ .get_port_pvid = xrx200sw_get_port_pvid,
++ .reset_switch = xrx200sw_reset_switch,
++ .get_port_link = xrx200sw_get_port_link,
++// .get_port_stats = xrx200sw_get_port_stats, //TODO
++};
++
++static int xrx200sw_init(struct xrx200_hw *hw)
++{
++ int netdev_num;
++
++ for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++)
++ {
++ struct switch_dev *swdev;
++ struct net_device *dev = hw->devs[netdev_num];
++ struct xrx200_priv *priv = netdev_priv(dev);
++ if (!priv->sw)
++ continue;
++
++ swdev = &hw->swdev;
++
++ swdev->name = "Lantiq XRX200 Switch";
++ swdev->vlans = XRX200_MAX_VLAN;
++ swdev->ports = XRX200_MAX_PORT;
++ swdev->cpu_port = 6;
++ swdev->ops = &xrx200sw_ops;
++
++ register_switch(swdev, dev);
++ return 0; // enough switches
++ }
++ return 0;
++}
++
++static int xrx200_open(struct net_device *dev)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++ unsigned long flags;
++ int i;
++
++ for (i = 0; i < XRX200_MAX_DMA; i++) {
++ if (!priv->hw->chan[i].dma.irq)
++ continue;
++ spin_lock_irqsave(&priv->hw->lock, flags);
++ if (!priv->hw->chan[i].refcount) {
++ if (XRX200_DMA_IS_RX(i))
++ napi_enable(&priv->hw->chan[i].napi);
++ ltq_dma_open(&priv->hw->chan[i].dma);
++ }
++ priv->hw->chan[i].refcount++;
++ spin_unlock_irqrestore(&priv->hw->lock, flags);
++ }
++ for (i = 0; i < priv->num_port; i++)
++ if (priv->port[i].phydev)
++ phy_start(priv->port[i].phydev);
++ netif_start_queue(dev);
++
++ return 0;
++}
++
++static int xrx200_close(struct net_device *dev)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++ unsigned long flags;
++ int i;
++
++ netif_stop_queue(dev);
++
++ for (i = 0; i < priv->num_port; i++)
++ if (priv->port[i].phydev)
++ phy_stop(priv->port[i].phydev);
++
++ for (i = 0; i < XRX200_MAX_DMA; i++) {
++ if (!priv->hw->chan[i].dma.irq)
++ continue;
++ spin_lock_irqsave(&priv->hw->lock, flags);
++ priv->hw->chan[i].refcount--;
++ if (!priv->hw->chan[i].refcount) {
++ if (XRX200_DMA_IS_RX(i))
++ napi_disable(&priv->hw->chan[i].napi);
++ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma);
++ }
++ spin_unlock_irqrestore(&priv->hw->lock, flags);
++ }
++
++ return 0;
++}
++
++static int xrx200_alloc_skb(struct xrx200_chan *ch)
++{
++#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD)
++ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD);
++ if (!ch->skb[ch->dma.desc])
++ return -ENOMEM;
++
++ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD);
++ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
++ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
++ DMA_FROM_DEVICE);
++ ch->dma.desc_base[ch->dma.desc].addr =
++ CPHYSADDR(ch->skb[ch->dma.desc]->data);
++ ch->dma.desc_base[ch->dma.desc].ctl =
++ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
++ XRX200_DMA_DATA_LEN;
++ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
++
++ return 0;
++}
++
++static void xrx200_hw_receive(struct xrx200_chan *ch, int id)
++{
++ struct net_device *dev = ch->devs[id];
++ struct xrx200_priv *priv = netdev_priv(dev);
++ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++ struct sk_buff *skb = ch->skb[ch->dma.desc];
++ int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - ETH_FCS_LEN;
++ unsigned long flags;
++
++ spin_lock_irqsave(&priv->hw->lock, flags);
++ if (xrx200_alloc_skb(ch)) {
++ netdev_err(dev,
++ "failed to allocate new rx buffer, stopping DMA\n");
++ ltq_dma_close(&ch->dma);
++ }
++
++ ch->dma.desc++;
++ ch->dma.desc %= LTQ_DESC_NUM;
++ spin_unlock_irqrestore(&priv->hw->lock, flags);
++
++ skb_put(skb, len);
++#ifdef SW_ROUTING
++ skb_pull(skb, 8);
++#endif
++ skb->dev = dev;
++ skb->protocol = eth_type_trans(skb, dev);
++ netif_receive_skb(skb);
++ priv->stats.rx_packets++;
++ priv->stats.rx_bytes+=len;
++}
++
++static int xrx200_poll_rx(struct napi_struct *napi, int budget)
++{
++ struct xrx200_chan *ch = container_of(napi,
++ struct xrx200_chan, napi);
++ struct xrx200_priv *priv = netdev_priv(ch->devs[0]);
++ int rx = 0;
++ int complete = 0;
++ unsigned long flags;
++
++ while ((rx < budget) && !complete) {
++ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
++#ifdef SW_ROUTING
++ struct sk_buff *skb = ch->skb[ch->dma.desc];
++ u32 *special_tag = (u32*)skb->data;
++ int port = (special_tag[1] >> SPPID_SHIFT) & SPPID_MASK;
++ xrx200_hw_receive(ch, priv->hw->port_map[port]);
++#else
++ xrx200_hw_receive(ch, 0);
++#endif
++ rx++;
++ } else {
++ complete = 1;
++ }
++ }
++ if (complete || !rx) {
++ napi_complete(&ch->napi);
++ spin_lock_irqsave(&priv->hw->lock, flags);
++ ltq_dma_ack_irq(&ch->dma);
++ spin_unlock_irqrestore(&priv->hw->lock, flags);
++ }
++ return rx;
++}
++
++static void xrx200_tx_housekeeping(unsigned long ptr)
++{
++ struct xrx200_hw *hw = (struct xrx200_hw *) ptr;
++ struct xrx200_chan *ch = &hw->chan[XRX200_DMA_TX];
++ unsigned long flags;
++ int i;
++
++ spin_lock_irqsave(&hw->lock, flags);
++ while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
++ dev_kfree_skb_any(ch->skb[ch->tx_free]);
++ ch->skb[ch->tx_free] = NULL;
++ memset(&ch->dma.desc_base[ch->tx_free], 0,
++ sizeof(struct ltq_dma_desc));
++ ch->tx_free++;
++ ch->tx_free %= LTQ_DESC_NUM;
++ }
++ spin_unlock_irqrestore(&hw->lock, flags);
++
++ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++) {
++ struct netdev_queue *txq =
++ netdev_get_tx_queue(ch->devs[i], 0);
++ if (netif_tx_queue_stopped(txq))
++ netif_tx_start_queue(txq);
++ }
++
++ spin_lock_irqsave(&hw->lock, flags);
++ ltq_dma_ack_irq(&ch->dma);
++ spin_unlock_irqrestore(&hw->lock, flags);
++}
++
++static struct net_device_stats *xrx200_get_stats (struct net_device *dev)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++
++ return &priv->stats;
++}
++
++static void xrx200_tx_timeout(struct net_device *dev)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++
++ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name);
++
++ priv->stats.tx_errors++;
++ netif_wake_queue(dev);
++}
++
++static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ int queue = skb_get_queue_mapping(skb);
++ struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
++ struct xrx200_priv *priv = netdev_priv(dev);
++ struct xrx200_chan *ch = &priv->hw->chan[XRX200_DMA_TX];
++ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++ unsigned long flags;
++ u32 byte_offset;
++ int len;
++#ifdef SW_ROUTING
++ #ifdef SW_PORTMAP
++ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | PORT_MAP_SEL | PORT_MAP_EN | DPID_ENABLE;
++ #else
++ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE;
++ #endif
++#endif
++
++ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
++
++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
++ netdev_err(dev, "tx ring full\n");
++ netif_tx_stop_queue(txq);
++ return NETDEV_TX_BUSY;
++ }
++#ifdef SW_ROUTING
++ #ifdef SW_PORTMAP
++ special_tag |= priv->port_map << PORT_MAP_SHIFT;
++ #else
++ if(priv->id)
++ special_tag |= (1 << DPID_SHIFT);
++ #endif
++ if(skb_headroom(skb) < 4) {
++ struct sk_buff *tmp = skb_realloc_headroom(skb, 4);
++ dev_kfree_skb_any(skb);
++ skb = tmp;
++ }
++ skb_push(skb, 4);
++ memcpy(skb->data, &special_tag, sizeof(u32));
++ len += 4;
++#endif
++
++ /* dma needs to start on a 16 byte aligned address */
++ byte_offset = CPHYSADDR(skb->data) % 16;
++ ch->skb[ch->dma.desc] = skb;
++
++ dev->trans_start = jiffies;
++
++ spin_lock_irqsave(&priv->hw->lock, flags);
++ desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
++ DMA_TO_DEVICE)) - byte_offset;
++ wmb();
++ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
++ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
++ ch->dma.desc++;
++ ch->dma.desc %= LTQ_DESC_NUM;
++ spin_unlock_irqrestore(&priv->hw->lock, flags);
++
++ if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
++ netif_tx_stop_queue(txq);
++
++ priv->stats.tx_packets++;
++ priv->stats.tx_bytes+=len;
++
++ return NETDEV_TX_OK;
++}
++
++static irqreturn_t xrx200_dma_irq(int irq, void *priv)
++{
++ struct xrx200_hw *hw = priv;
++ int ch = irq - XRX200_DMA_IRQ;
++
++ if (ch % 2)
++ tasklet_schedule(&hw->chan[ch].tasklet);
++ else
++ napi_schedule(&hw->chan[ch].napi);
++
++ return IRQ_HANDLED;
++}
++
++static int xrx200_dma_init(struct xrx200_hw *hw)
++{
++ int i, err = 0;
++
++ ltq_dma_init_port(DMA_PORT_ETOP);
++
++ for (i = 0; i < 8 && !err; i++) {
++ int irq = XRX200_DMA_IRQ + i;
++ struct xrx200_chan *ch = &hw->chan[i];
++
++ ch->idx = ch->dma.nr = i;
++
++ if (i == XRX200_DMA_TX) {
++ ltq_dma_alloc_tx(&ch->dma);
++ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw);
++ } else if (i == XRX200_DMA_RX) {
++ ltq_dma_alloc_rx(&ch->dma);
++ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
++ ch->dma.desc++)
++ if (xrx200_alloc_skb(ch))
++ err = -ENOMEM;
++ ch->dma.desc = 0;
++ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw);
++ } else
++ continue;
++
++ if (!err)
++ ch->dma.irq = irq;
++ }
++
++ return err;
++}
++
++#ifdef SW_POLLING
++static void xrx200_gmac_update(struct xrx200_port *port)
++{
++ u16 phyaddr = port->phydev->addr & MDIO_PHY_ADDR_MASK;
++ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK;
++ u16 miirate = 0;
++
++ switch (port->phydev->speed) {
++ case SPEED_1000:
++ phyaddr |= MDIO_PHY_SPEED_G1;
++ miirate = MII_CFG_RATE_M125;
++ break;
++
++ case SPEED_100:
++ phyaddr |= MDIO_PHY_SPEED_M100;
++ switch (miimode) {
++ case MII_CFG_MODE_RMIIM:
++ case MII_CFG_MODE_RMIIP:
++ miirate = MII_CFG_RATE_M50;
++ break;
++ default:
++ miirate = MII_CFG_RATE_M25;
++ break;
++ }
++ break;
++
++ default:
++ phyaddr |= MDIO_PHY_SPEED_M10;
++ miirate = MII_CFG_RATE_M2P5;
++ break;
++ }
++
++ if (port->phydev->link)
++ phyaddr |= MDIO_PHY_LINK_UP;
++ else
++ phyaddr |= MDIO_PHY_LINK_DOWN;
++
++ if (port->phydev->duplex == DUPLEX_FULL)
++ phyaddr |= MDIO_PHY_FDUP_EN;
++ else
++ phyaddr |= MDIO_PHY_FDUP_DIS;
++
++ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num));
++ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num));
++ udelay(1);
++}
++#else
++static void xrx200_gmac_update(struct xrx200_port *port)
++{
++
++}
++#endif
++
++static void xrx200_mdio_link(struct net_device *dev)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++ int i;
++
++ for (i = 0; i < priv->num_port; i++) {
++ if (!priv->port[i].phydev)
++ continue;
++
++ if (priv->port[i].link != priv->port[i].phydev->link) {
++ xrx200_gmac_update(&priv->port[i]);
++ priv->port[i].link = priv->port[i].phydev->link;
++ netdev_info(dev, "port %d %s link\n",
++ priv->port[i].num,
++ (priv->port[i].link)?("got"):("lost"));
++ }
++ }
++}
++
++static inline int xrx200_mdio_poll(struct mii_bus *bus)
++{
++ unsigned cnt = 10000;
++
++ while (likely(cnt--)) {
++ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL);
++ if ((ctrl & MDIO_BUSY) == 0)
++ return 0;
++ }
++
++ return 1;
++}
++
++static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val)
++{
++ if (xrx200_mdio_poll(bus))
++ return 1;
++
++ ltq_mdio_w32(val, MDIO_WRITE);
++ ltq_mdio_w32(MDIO_BUSY | MDIO_WR |
++ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
++ (reg & MDIO_MASK),
++ MDIO_CTRL);
++
++ return 0;
++}
++
++static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg)
++{
++ if (xrx200_mdio_poll(bus))
++ return -1;
++
++ ltq_mdio_w32(MDIO_BUSY | MDIO_RD |
++ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
++ (reg & MDIO_MASK),
++ MDIO_CTRL);
++
++ if (xrx200_mdio_poll(bus))
++ return -1;
++
++ return ltq_mdio_r32(MDIO_READ);
++}
++
++static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++ struct phy_device *phydev = NULL;
++ unsigned val;
++
++ phydev = priv->hw->mii_bus->phy_map[port->phy_addr];
++
++ if (!phydev) {
++ netdev_err(dev, "no PHY found\n");
++ return -ENODEV;
++ }
++
++ phydev = phy_connect(dev, dev_name(&phydev->dev), &xrx200_mdio_link,
++ port->phy_if);
++
++ if (IS_ERR(phydev)) {
++ netdev_err(dev, "Could not attach to PHY\n");
++ return PTR_ERR(phydev);
++ }
++
++ phydev->supported &= (SUPPORTED_10baseT_Half
++ | SUPPORTED_10baseT_Full
++ | SUPPORTED_100baseT_Half
++ | SUPPORTED_100baseT_Full
++ | SUPPORTED_1000baseT_Half
++ | SUPPORTED_1000baseT_Full
++ | SUPPORTED_Autoneg
++ | SUPPORTED_MII
++ | SUPPORTED_TP);
++ phydev->advertising = phydev->supported;
++ port->phydev = phydev;
++
++ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
++ dev->name, phydev->drv->name,
++ dev_name(&phydev->dev), phydev->irq);
++
++#ifdef SW_POLLING
++ phy_read_status(phydev);
++
++ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
++ val |= ADVERTIZE_MPD;
++ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
++ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040);
++
++ phy_start_aneg(phydev);
++#endif
++ return 0;
++}
++
++static void xrx200_port_config(struct xrx200_priv *priv,
++ const struct xrx200_port *port)
++{
++ u16 miimode = 0;
++
++ switch (port->num) {
++ case 0: /* xMII0 */
++ case 1: /* xMII1 */
++ switch (port->phy_if) {
++ case PHY_INTERFACE_MODE_MII:
++ if (port->flags & XRX200_PORT_TYPE_PHY)
++ /* MII MAC mode, connected to external PHY */
++ miimode = MII_CFG_MODE_MIIM;
++ else
++ /* MII PHY mode, connected to external MAC */
++ miimode = MII_CFG_MODE_MIIP;
++ break;
++ case PHY_INTERFACE_MODE_RMII:
++ if (port->flags & XRX200_PORT_TYPE_PHY)
++ /* RMII MAC mode, connected to external PHY */
++ miimode = MII_CFG_MODE_RMIIM;
++ else
++ /* RMII PHY mode, connected to external MAC */
++ miimode = MII_CFG_MODE_RMIIP;
++ break;
++ case PHY_INTERFACE_MODE_RGMII:
++ /* RGMII MAC mode, connected to external PHY */
++ miimode = MII_CFG_MODE_RGMII;
++ break;
++ default:
++ break;
++ }
++ break;
++ case 2: /* internal GPHY0 */
++ case 3: /* internal GPHY0 */
++ case 4: /* internal GPHY1 */
++ switch (port->phy_if) {
++ case PHY_INTERFACE_MODE_MII:
++ case PHY_INTERFACE_MODE_GMII:
++ /* MII MAC mode, connected to internal GPHY */
++ miimode = MII_CFG_MODE_MIIM;
++ break;
++ default:
++ break;
++ }
++ break;
++ case 5: /* internal GPHY1 or xMII2 */
++ switch (port->phy_if) {
++ case PHY_INTERFACE_MODE_MII:
++ /* MII MAC mode, connected to internal GPHY */
++ miimode = MII_CFG_MODE_MIIM;
++ break;
++ case PHY_INTERFACE_MODE_RGMII:
++ /* RGMII MAC mode, connected to external PHY */
++ miimode = MII_CFG_MODE_RGMII;
++ break;
++ default:
++ break;
++ }
++ break;
++ default:
++ break;
++ }
++
++ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN,
++ MII_CFG(port->num));
++}
++
++static int xrx200_init(struct net_device *dev)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++ struct sockaddr mac;
++ int err, i;
++
++#ifndef SW_POLLING
++ unsigned int reg = 0;
++
++ /* enable auto polling */
++ for (i = 0; i < priv->num_port; i++)
++ reg |= BIT(priv->port[i].num);
++ ltq_mdio_w32(reg, MDIO_CLK_CFG0);
++ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1);
++#endif
++
++ /* setup each port */
++ for (i = 0; i < priv->num_port; i++)
++ xrx200_port_config(priv, &priv->port[i]);
++
++ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
++ if (!is_valid_ether_addr(mac.sa_data)) {
++ pr_warn("net-xrx200: invalid MAC, using random\n");
++ eth_random_addr(mac.sa_data);
++ dev->addr_assign_type |= NET_ADDR_RANDOM;
++ }
++
++ err = eth_mac_addr(dev, &mac);
++ if (err)
++ goto err_netdev;
++
++ for (i = 0; i < priv->num_port; i++)
++ if (xrx200_mdio_probe(dev, &priv->port[i]))
++ pr_warn("xrx200-mdio: probing phy of port %d failed\n",
++ priv->port[i].num);
++
++ return 0;
++
++err_netdev:
++ unregister_netdev(dev);
++ free_netdev(dev);
++ return err;
++}
++
++static void xrx200_pci_microcode(void)
++{
++ int i;
++
++ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK,
++ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL);
++ ltq_switch_w32(0, PCE_TBL_MASK);
++
++ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) {
++ ltq_switch_w32(i, PCE_TBL_ADDR);
++ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0));
++ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1));
++ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2));
++ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3));
++
++ // start the table access:
++ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL);
++ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY);
++ }
++
++ /* tell the switch that the microcode is loaded */
++ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0));
++}
++
++static void xrx200_hw_init(struct xrx200_hw *hw)
++{
++ int i;
++
++ /* enable clock gate */
++ clk_enable(hw->clk);
++
++ ltq_switch_w32(1, 0);
++ mdelay(100);
++ ltq_switch_w32(0, 0);
++ /*
++ * TODO: we should really disbale all phys/miis here and explicitly
++ * enable them in the device secific init function
++ */
++
++ /* disable port fetch/store dma */
++ for (i = 0; i < 7; i++ ) {
++ ltq_switch_w32(0, FDMA_PCTRLx(i));
++ ltq_switch_w32(0, SDMA_PCTRLx(i));
++ }
++
++ /* enable Switch */
++ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB);
++
++ /* load the pce microcode */
++ xrx200_pci_microcode();
++
++ /* Default unknown Broadcat/Multicast/Unicast port maps */
++ ltq_switch_w32(0x7f, PCE_PMAP1);
++ ltq_switch_w32(0x7f, PCE_PMAP2);
++ ltq_switch_w32(0x7f, PCE_PMAP3);
++
++ /* RMON Counter Enable for all physical ports */
++ for (i = 0; i < 7; i++)
++ ltq_switch_w32(0x1, BM_PCFG(i));
++
++ /* disable auto polling */
++ ltq_mdio_w32(0x0, MDIO_CLK_CFG0);
++
++ /* enable port statistic counters */
++ for (i = 0; i < 7; i++)
++ ltq_switch_w32(0x1, BM_PCFGx(i));
++
++ /* set IPG to 12 */
++ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG);
++
++#ifdef SW_ROUTING
++ /* enable status header, enable CRC */
++ ltq_pmac_w32_mask(0,
++ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC,
++ PMAC_HD_CTL);
++#else
++ /* disable status header, enable CRC */
++ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS,
++ PMAC_HD_CTL_AC,
++ PMAC_HD_CTL);
++#endif
++
++ /* enable port fetch/store dma & VLAN Modification */
++ for (i = 0; i < 7; i++ ) {
++ ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i));
++ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i));
++ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0));
++ }
++
++ /* enable special tag insertion on cpu port */
++ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6));
++ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0));
++ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2));
++ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG);
++}
++
++static void xrx200_hw_cleanup(struct xrx200_hw *hw)
++{
++ int i;
++
++ /* disable the switch */
++ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB);
++
++ /* free the channels and IRQs */
++ for (i = 0; i < 2; i++) {
++ ltq_dma_free(&hw->chan[i].dma);
++ if (hw->chan[i].dma.irq)
++ free_irq(hw->chan[i].dma.irq, hw);
++ }
++
++ /* free the allocated RX ring */
++ for (i = 0; i < LTQ_DESC_NUM; i++)
++ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]);
++
++ /* clear the mdio bus */
++ mdiobus_unregister(hw->mii_bus);
++ mdiobus_free(hw->mii_bus);
++
++ /* release the clock */
++ clk_disable(hw->clk);
++ clk_put(hw->clk);
++}
++
++static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np)
++{
++ hw->mii_bus = mdiobus_alloc();
++ if (!hw->mii_bus)
++ return -ENOMEM;
++
++ hw->mii_bus->read = xrx200_mdio_rd;
++ hw->mii_bus->write = xrx200_mdio_wr;
++ hw->mii_bus->name = "lantiq,xrx200-mdio";
++ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
++
++ if (of_mdiobus_register(hw->mii_bus, np)) {
++ mdiobus_free(hw->mii_bus);
++ return -ENXIO;
++ }
++
++ return 0;
++}
++
++static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port)
++{
++ const __be32 *addr, *id = of_get_property(port, "reg", NULL);
++ struct xrx200_port *p = &priv->port[priv->num_port];
++
++ if (!id)
++ return;
++
++ memset(p, 0, sizeof(struct xrx200_port));
++ p->phy_node = of_parse_phandle(port, "phy-handle", 0);
++ addr = of_get_property(p->phy_node, "reg", NULL);
++ if (!addr)
++ return;
++
++ p->num = *id;
++ p->phy_addr = *addr;
++ p->phy_if = of_get_phy_mode(port);
++ if (p->phy_addr > 0x10)
++ p->flags = XRX200_PORT_TYPE_MAC;
++ else
++ p->flags = XRX200_PORT_TYPE_PHY;
++ priv->num_port++;
++
++ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags);
++ if (gpio_is_valid(p->gpio))
++ if (!gpio_request(p->gpio, "phy-reset")) {
++ gpio_direction_output(p->gpio,
++ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0));
++ udelay(100);
++ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
++ }
++ /* is this port a wan port ? */
++ if (priv->wan)
++ priv->hw->wan_map |= BIT(p->num);
++
++ priv->port_map |= BIT(p->num);
++
++ /* store the port id in the hw struct so we can map ports -> devices */
++ priv->hw->port_map[p->num] = priv->hw->num_devs;
++}
++
++static const struct net_device_ops xrx200_netdev_ops = {
++ .ndo_init = xrx200_init,
++ .ndo_open = xrx200_open,
++ .ndo_stop = xrx200_close,
++ .ndo_start_xmit = xrx200_start_xmit,
++ .ndo_set_mac_address = eth_mac_addr,
++ .ndo_validate_addr = eth_validate_addr,
++ .ndo_change_mtu = eth_change_mtu,
++ .ndo_get_stats = xrx200_get_stats,
++ .ndo_tx_timeout = xrx200_tx_timeout,
++};
++
++static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface)
++{
++ struct xrx200_priv *priv;
++ struct device_node *port;
++ const __be32 *wan;
++ const __be32 *sw;
++
++ /* alloc the network device */
++ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv));
++ if (!hw->devs[hw->num_devs])
++ return;
++
++ /* setup the network device */
++ strcpy(hw->devs[hw->num_devs]->name, "eth%d");
++ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops;
++ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT;
++ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM;
++
++ /* setup our private data */
++ priv = netdev_priv(hw->devs[hw->num_devs]);
++ priv->hw = hw;
++ of_get_mac_address_mtd(iface, priv->mac);
++ priv->id = hw->num_devs;
++
++ /* is this the wan interface ? */
++ wan = of_get_property(iface, "lantiq,wan", NULL);
++ if (wan && (*wan == 1))
++ priv->wan = 1;
++
++ /* should the switch be enabled on this interface ? */
++ sw = of_get_property(iface, "lantiq,switch", NULL);
++ if (sw && (*sw == 1))
++ priv->sw = 1;
++
++ /* load the ports that are part of the interface */
++ for_each_child_of_node(iface, port)
++ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port"))
++ xrx200_of_port(priv, port);
++
++ /* register the actual device */
++ if (!register_netdev(hw->devs[hw->num_devs]))
++ hw->num_devs++;
++}
++
++static struct xrx200_hw xrx200_hw;
++
++static int xrx200_probe(struct platform_device *pdev)
++{
++ struct resource *res[4];
++ struct device_node *mdio_np, *iface_np;
++ int i;
++
++ /* load the memory ranges */
++ for (i = 0; i < 4; i++) {
++ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i);
++ if (!res[i]) {
++ dev_err(&pdev->dev, "failed to get resources\n");
++ return -ENOENT;
++ }
++ }
++ xrx200_switch_membase = devm_request_and_ioremap(&pdev->dev, res[0]);
++ xrx200_mdio_membase = devm_request_and_ioremap(&pdev->dev, res[1]);
++ xrx200_mii_membase = devm_request_and_ioremap(&pdev->dev, res[2]);
++ xrx200_pmac_membase = devm_request_and_ioremap(&pdev->dev, res[3]);
++ if (!xrx200_switch_membase || !xrx200_mdio_membase ||
++ !xrx200_mii_membase || !xrx200_pmac_membase) {
++ dev_err(&pdev->dev, "failed to request and remap io ranges \n");
++ return -ENOMEM;
++ }
++
++ /* get the clock */
++ xrx200_hw.clk = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(xrx200_hw.clk)) {
++ dev_err(&pdev->dev, "failed to get clock\n");
++ return PTR_ERR(xrx200_hw.clk);
++ }
++
++ /* bring up the dma engine and IP core */
++ spin_lock_init(&xrx200_hw.lock);
++ xrx200_dma_init(&xrx200_hw);
++ xrx200_hw_init(&xrx200_hw);
++ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw);
++
++ /* bring up the mdio bus */
++ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL,
++ "lantiq,xrx200-mdio");
++ if (mdio_np)
++ if (xrx200_of_mdio(&xrx200_hw, mdio_np))
++ dev_err(&pdev->dev, "mdio probe failed\n");
++
++ /* load the interfaces */
++ for_each_child_of_node(pdev->dev.of_node, iface_np)
++ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) {
++ if (xrx200_hw.num_devs < XRX200_MAX_DEV)
++ xrx200_of_iface(&xrx200_hw, iface_np);
++ else
++ dev_err(&pdev->dev,
++ "only %d interfaces allowed\n",
++ XRX200_MAX_DEV);
++ }
++
++ if (!xrx200_hw.num_devs) {
++ xrx200_hw_cleanup(&xrx200_hw);
++ dev_err(&pdev->dev, "failed to load interfaces\n");
++ return -ENOENT;
++ }
++
++ xrx200sw_init(&xrx200_hw);
++
++ /* set wan port mask */
++ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN);
++
++ for (i = 0; i < xrx200_hw.num_devs; i++) {
++ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i];
++ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i];
++ }
++
++ /* setup NAPI */
++ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev);
++ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev,
++ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32);
++
++ platform_set_drvdata(pdev, &xrx200_hw);
++
++ return 0;
++}
++
++static int xrx200_remove(struct platform_device *pdev)
++{
++ struct net_device *dev = platform_get_drvdata(pdev);
++ struct xrx200_priv *priv;
++
++ if (!dev)
++ return 0;
++
++ priv = netdev_priv(dev);
++
++ /* free stack related instances */
++ netif_stop_queue(dev);
++ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi);
++
++ /* shut down hardware */
++ xrx200_hw_cleanup(&xrx200_hw);
++
++ /* remove the actual device */
++ unregister_netdev(dev);
++ free_netdev(dev);
++
++ return 0;
++}
++
++static const struct of_device_id xrx200_match[] = {
++ { .compatible = "lantiq,xrx200-net" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, xrx200_match);
++
++static struct platform_driver xrx200_driver = {
++ .probe = xrx200_probe,
++ .remove = xrx200_remove,
++ .driver = {
++ .name = "lantiq,xrx200-net",
++ .of_match_table = xrx200_match,
++ .owner = THIS_MODULE,
++ },
++};
++
++module_platform_driver(xrx200_driver);
++
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/net/ethernet/lantiq_xrx200_sw.h b/drivers/net/ethernet/lantiq_xrx200_sw.h
+new file mode 100644
+index 0000000..e7188a2
+--- /dev/null
++++ b/drivers/net/ethernet/lantiq_xrx200_sw.h
+@@ -0,0 +1,1328 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2010 Lantiq Deutschland GmbH
++ * Copyright (C) 2013 Antonios Vamporakis <vamporakis@yahoo.com>
++ *
++ * VR9 switch registers extracted from 310TUJ0 switch api
++ * WARNING mult values of 0x00 may not be correct
++ *
++ */
++
++enum {
++// XRX200_ETHSW_SWRES, /* Ethernet Switch ResetControl Register */
++// XRX200_ETHSW_SWRES_R1, /* Hardware Reset */
++// XRX200_ETHSW_SWRES_R0, /* Register Configuration */
++// XRX200_ETHSW_CLK_MAC_GAT, /* Ethernet Switch Clock ControlRegister */
++// XRX200_ETHSW_CLK_EXP_SLEEP, /* Exponent to put system into sleep */
++// XRX200_ETHSW_CLK_EXP_WAKE, /* Exponent to wake up system */
++// XRX200_ETHSW_CLK_CLK2_EN, /* CLK2 Input for MAC */
++// XRX200_ETHSW_CLK_EXT_DIV_EN, /* External Clock Divider Enable */
++// XRX200_ETHSW_CLK_RAM_DBG_EN, /* Clock Gating Enable */
++// XRX200_ETHSW_CLK_REG_GAT_EN, /* Clock Gating Enable */
++// XRX200_ETHSW_CLK_GAT_EN, /* Clock Gating Enable */
++// XRX200_ETHSW_CLK_MAC_GAT_EN, /* Clock Gating Enable */
++// XRX200_ETHSW_DBG_STEP, /* Ethernet Switch Debug ControlRegister */
++// XRX200_ETHSW_DBG_CLK_SEL, /* Trigger Enable */
++// XRX200_ETHSW_DBG_MON_EN, /* Monitoring Enable */
++// XRX200_ETHSW_DBG_TRIG_EN, /* Trigger Enable */
++// XRX200_ETHSW_DBG_MODE, /* Debug Mode */
++// XRX200_ETHSW_DBG_STEP_TIME, /* Clock Step Size */
++// XRX200_ETHSW_SSB_MODE, /* Ethernet Switch SharedSegment Buffer Mode Register */
++// XRX200_ETHSW_SSB_MODE_ADDE, /* Memory Address */
++// XRX200_ETHSW_SSB_MODE_MODE, /* Memory Access Mode */
++// XRX200_ETHSW_SSB_ADDR, /* Ethernet Switch SharedSegment Buffer Address Register */
++// XRX200_ETHSW_SSB_ADDR_ADDE, /* Memory Address */
++// XRX200_ETHSW_SSB_DATA, /* Ethernet Switch SharedSegment Buffer Data Register */
++// XRX200_ETHSW_SSB_DATA_DATA, /* Data Value */
++// XRX200_ETHSW_CAP_0, /* Ethernet Switch CapabilityRegister 0 */
++// XRX200_ETHSW_CAP_0_SPEED, /* Clock frequency */
++// XRX200_ETHSW_CAP_1, /* Ethernet Switch CapabilityRegister 1 */
++// XRX200_ETHSW_CAP_1_GMAC, /* MAC operation mode */
++// XRX200_ETHSW_CAP_1_QUEUE, /* Number of queues */
++// XRX200_ETHSW_CAP_1_VPORTS, /* Number of virtual ports */
++// XRX200_ETHSW_CAP_1_PPORTS, /* Number of physical ports */
++// XRX200_ETHSW_CAP_2, /* Ethernet Switch CapabilityRegister 2 */
++// XRX200_ETHSW_CAP_2_PACKETS, /* Number of packets */
++// XRX200_ETHSW_CAP_3, /* Ethernet Switch CapabilityRegister 3 */
++// XRX200_ETHSW_CAP_3_METERS, /* Number of traffic meters */
++// XRX200_ETHSW_CAP_3_SHAPERS, /* Number of traffic shapers */
++// XRX200_ETHSW_CAP_4, /* Ethernet Switch CapabilityRegister 4 */
++// XRX200_ETHSW_CAP_4_PPPOE, /* PPPoE table size */
++// XRX200_ETHSW_CAP_4_VLAN, /* Active VLAN table size */
++// XRX200_ETHSW_CAP_5, /* Ethernet Switch CapabilityRegister 5 */
++// XRX200_ETHSW_CAP_5_IPPLEN, /* IP packet length table size */
++// XRX200_ETHSW_CAP_5_PROT, /* Protocol table size */
++// XRX200_ETHSW_CAP_6, /* Ethernet Switch CapabilityRegister 6 */
++// XRX200_ETHSW_CAP_6_MACDASA, /* MAC DA/SA table size */
++// XRX200_ETHSW_CAP_6_APPL, /* Application table size */
++// XRX200_ETHSW_CAP_7, /* Ethernet Switch CapabilityRegister 7 */
++// XRX200_ETHSW_CAP_7_IPDASAM, /* IP DA/SA MSB table size */
++// XRX200_ETHSW_CAP_7_IPDASAL, /* IP DA/SA LSB table size */
++// XRX200_ETHSW_CAP_8, /* Ethernet Switch CapabilityRegister 8 */
++// XRX200_ETHSW_CAP_8_MCAST, /* Multicast table size */
++// XRX200_ETHSW_CAP_9, /* Ethernet Switch CapabilityRegister 9 */
++// XRX200_ETHSW_CAP_9_FLAGG, /* Flow Aggregation table size */
++// XRX200_ETHSW_CAP_10, /* Ethernet Switch CapabilityRegister 10 */
++// XRX200_ETHSW_CAP_10_MACBT, /* MAC bridging table size */
++// XRX200_ETHSW_CAP_11, /* Ethernet Switch CapabilityRegister 11 */
++// XRX200_ETHSW_CAP_11_BSIZEL, /* Packet buffer size (lower part, in byte) */
++// XRX200_ETHSW_CAP_12, /* Ethernet Switch CapabilityRegister 12 */
++// XRX200_ETHSW_CAP_12_BSIZEH, /* Packet buffer size (higher part, in byte) */
++// XRX200_ETHSW_VERSION_REV, /* Ethernet Switch VersionRegister */
++// XRX200_ETHSW_VERSION_MOD_ID, /* Module Identification */
++// XRX200_ETHSW_VERSION_REV_ID, /* Hardware Revision Identification */
++// XRX200_ETHSW_IER, /* Interrupt Enable Register */
++// XRX200_ETHSW_IER_FDMAIE, /* Fetch DMA Interrupt Enable */
++// XRX200_ETHSW_IER_SDMAIE, /* Store DMA Interrupt Enable */
++// XRX200_ETHSW_IER_MACIE, /* Ethernet MAC Interrupt Enable */
++// XRX200_ETHSW_IER_PCEIE, /* Parser and Classification Engine Interrupt Enable */
++// XRX200_ETHSW_IER_BMIE, /* Buffer Manager Interrupt Enable */
++// XRX200_ETHSW_ISR, /* Interrupt Status Register */
++// XRX200_ETHSW_ISR_FDMAINT, /* Fetch DMA Interrupt */
++// XRX200_ETHSW_ISR_SDMAINT, /* Store DMA Interrupt */
++// XRX200_ETHSW_ISR_MACINT, /* Ethernet MAC Interrupt */
++// XRX200_ETHSW_ISR_PCEINT, /* Parser and Classification Engine Interrupt */
++// XRX200_ETHSW_ISR_BMINT, /* Buffer Manager Interrupt */
++// XRX200_ETHSW_SPARE_0, /* Ethernet Switch SpareCells 0 */
++// XRX200_ETHSW_SPARE_0_SPARE, /* SPARE0 */
++// XRX200_ETHSW_SPARE_1, /* Ethernet Switch SpareCells 1 */
++// XRX200_ETHSW_SPARE_1_SPARE, /* SPARE1 */
++// XRX200_ETHSW_SPARE_2, /* Ethernet Switch SpareCells 2 */
++// XRX200_ETHSW_SPARE_2_SPARE, /* SPARE2 */
++// XRX200_ETHSW_SPARE_3, /* Ethernet Switch SpareCells 3 */
++// XRX200_ETHSW_SPARE_3_SPARE, /* SPARE3 */
++// XRX200_ETHSW_SPARE_4, /* Ethernet Switch SpareCells 4 */
++// XRX200_ETHSW_SPARE_4_SPARE, /* SPARE4 */
++// XRX200_ETHSW_SPARE_5, /* Ethernet Switch SpareCells 5 */
++// XRX200_ETHSW_SPARE_5_SPARE, /* SPARE5 */
++// XRX200_ETHSW_SPARE_6, /* Ethernet Switch SpareCells 6 */
++// XRX200_ETHSW_SPARE_6_SPARE, /* SPARE6 */
++// XRX200_ETHSW_SPARE_7, /* Ethernet Switch SpareCells 7 */
++// XRX200_ETHSW_SPARE_7_SPARE, /* SPARE7 */
++// XRX200_ETHSW_SPARE_8, /* Ethernet Switch SpareCells 8 */
++// XRX200_ETHSW_SPARE_8_SPARE, /* SPARE8 */
++// XRX200_ETHSW_SPARE_9, /* Ethernet Switch SpareCells 9 */
++// XRX200_ETHSW_SPARE_9_SPARE, /* SPARE9 */
++// XRX200_ETHSW_SPARE_10, /* Ethernet Switch SpareCells 10 */
++// XRX200_ETHSW_SPARE_10_SPARE, /* SPARE10 */
++// XRX200_ETHSW_SPARE_11, /* Ethernet Switch SpareCells 11 */
++// XRX200_ETHSW_SPARE_11_SPARE, /* SPARE11 */
++// XRX200_ETHSW_SPARE_12, /* Ethernet Switch SpareCells 12 */
++// XRX200_ETHSW_SPARE_12_SPARE, /* SPARE12 */
++// XRX200_ETHSW_SPARE_13, /* Ethernet Switch SpareCells 13 */
++// XRX200_ETHSW_SPARE_13_SPARE, /* SPARE13 */
++// XRX200_ETHSW_SPARE_14, /* Ethernet Switch SpareCells 14 */
++// XRX200_ETHSW_SPARE_14_SPARE, /* SPARE14 */
++// XRX200_ETHSW_SPARE_15, /* Ethernet Switch SpareCells 15 */
++// XRX200_ETHSW_SPARE_15_SPARE, /* SPARE15 */
++// XRX200_BM_RAM_VAL_3, /* RAM Value Register 3 */
++// XRX200_BM_RAM_VAL_3_VAL3, /* Data value [15:0] */
++// XRX200_BM_RAM_VAL_2, /* RAM Value Register 2 */
++// XRX200_BM_RAM_VAL_2_VAL2, /* Data value [15:0] */
++// XRX200_BM_RAM_VAL_1, /* RAM Value Register 1 */
++// XRX200_BM_RAM_VAL_1_VAL1, /* Data value [15:0] */
++// XRX200_BM_RAM_VAL_0, /* RAM Value Register 0 */
++// XRX200_BM_RAM_VAL_0_VAL0, /* Data value [15:0] */
++// XRX200_BM_RAM_ADDR, /* RAM Address Register */
++// XRX200_BM_RAM_ADDR_ADDR, /* RAM Address */
++// XRX200_BM_RAM_CTRL, /* RAM Access Control Register */
++// XRX200_BM_RAM_CTRL_BAS, /* Access Busy/Access Start */
++// XRX200_BM_RAM_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
++// XRX200_BM_RAM_CTRL_ADDR, /* Address for RAM selection */
++// XRX200_BM_FSQM_GCTRL, /* Free Segment Queue ManagerGlobal Control Register */
++// XRX200_BM_FSQM_GCTRL_SEGNUM, /* Maximum Segment Number */
++// XRX200_BM_CONS_SEG, /* Number of Consumed SegmentsRegister */
++// XRX200_BM_CONS_SEG_FSEG, /* Number of Consumed Segments */
++// XRX200_BM_CONS_PKT, /* Number of Consumed PacketPointers Register */
++// XRX200_BM_CONS_PKT_FQP, /* Number of Consumed Packet Pointers */
++// XRX200_BM_GCTRL_F, /* Buffer Manager Global ControlRegister 0 */
++// XRX200_BM_GCTRL_BM_STA, /* Buffer Manager Initialization Status Bit */
++// XRX200_BM_GCTRL_SAT, /* RMON Counter Update Mode */
++// XRX200_BM_GCTRL_FR_RBC, /* Freeze RMON RX Bad Byte 64 Bit Counter */
++// XRX200_BM_GCTRL_FR_RGC, /* Freeze RMON RX Good Byte 64 Bit Counter */
++// XRX200_BM_GCTRL_FR_TGC, /* Freeze RMON TX Good Byte 64 Bit Counter */
++// XRX200_BM_GCTRL_I_FIN, /* RAM initialization finished */
++// XRX200_BM_GCTRL_CX_INI, /* PQM Context RAM initialization */
++// XRX200_BM_GCTRL_FP_INI, /* FPQM RAM initialization */
++// XRX200_BM_GCTRL_FS_INI, /* FSQM RAM initialization */
++// XRX200_BM_GCTRL_R_SRES, /* Software Reset for RMON */
++// XRX200_BM_GCTRL_S_SRES, /* Software Reset for Scheduler */
++// XRX200_BM_GCTRL_A_SRES, /* Software Reset for AVG */
++// XRX200_BM_GCTRL_P_SRES, /* Software Reset for PQM */
++// XRX200_BM_GCTRL_F_SRES, /* Software Reset for FSQM */
++// XRX200_BM_QUEUE_GCTRL, /* Queue Manager GlobalControl Register 0 */
++// XRX200_BM_QUEUE_GCTRL_GL_MOD, /* WRED Mode Signal */
++// XRX200_BM_QUEUE_GCTRL_AQUI, /* Average Queue Update Interval */
++// XRX200_BM_QUEUE_GCTRL_AQWF, /* Average Queue Weight Factor */
++// XRX200_BM_QUEUE_GCTRL_QAVGEN, /* Queue Average Calculation Enable */
++// XRX200_BM_QUEUE_GCTRL_DPROB, /* Drop Probability Profile */
++// XRX200_BM_WRED_RTH_0, /* WRED Red Threshold Register0 */
++// XRX200_BM_WRED_RTH_0_MINTH, /* Minimum Threshold */
++// XRX200_BM_WRED_RTH_1, /* WRED Red Threshold Register1 */
++// XRX200_BM_WRED_RTH_1_MAXTH, /* Maximum Threshold */
++// XRX200_BM_WRED_YTH_0, /* WRED Yellow ThresholdRegister 0 */
++// XRX200_BM_WRED_YTH_0_MINTH, /* Minimum Threshold */
++// XRX200_BM_WRED_YTH_1, /* WRED Yellow ThresholdRegister 1 */
++// XRX200_BM_WRED_YTH_1_MAXTH, /* Maximum Threshold */
++// XRX200_BM_WRED_GTH_0, /* WRED Green ThresholdRegister 0 */
++// XRX200_BM_WRED_GTH_0_MINTH, /* Minimum Threshold */
++// XRX200_BM_WRED_GTH_1, /* WRED Green ThresholdRegister 1 */
++// XRX200_BM_WRED_GTH_1_MAXTH, /* Maximum Threshold */
++// XRX200_BM_DROP_GTH_0_THR, /* Drop Threshold ConfigurationRegister 0 */
++// XRX200_BM_DROP_GTH_0_THR_FQ, /* Threshold for frames marked red */
++// XRX200_BM_DROP_GTH_1_THY, /* Drop Threshold ConfigurationRegister 1 */
++// XRX200_BM_DROP_GTH_1_THY_FQ, /* Threshold for frames marked yellow */
++// XRX200_BM_DROP_GTH_2_THG, /* Drop Threshold ConfigurationRegister 2 */
++// XRX200_BM_DROP_GTH_2_THG_FQ, /* Threshold for frames marked green */
++// XRX200_BM_IER, /* Buffer Manager Global InterruptEnable Register */
++// XRX200_BM_IER_CNT4, /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
++// XRX200_BM_IER_CNT3, /* Counter Group 3 (RMON-PQM) Interrupt Enable */
++// XRX200_BM_IER_CNT2, /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
++// XRX200_BM_IER_CNT1, /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */
++// XRX200_BM_IER_CNT0, /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */
++// XRX200_BM_IER_DEQ, /* PQM dequeue Interrupt Enable */
++// XRX200_BM_IER_ENQ, /* PQM Enqueue Interrupt Enable */
++// XRX200_BM_IER_FSQM, /* Buffer Empty Interrupt Enable */
++// XRX200_BM_ISR, /* Buffer Manager Global InterruptStatus Register */
++// XRX200_BM_ISR_CNT4, /* Counter Group 4 Interrupt */
++// XRX200_BM_ISR_CNT3, /* Counter Group 3 Interrupt */
++// XRX200_BM_ISR_CNT2, /* Counter Group 2 Interrupt */
++// XRX200_BM_ISR_CNT1, /* Counter Group 1 Interrupt */
++// XRX200_BM_ISR_CNT0, /* Counter Group 0 Interrupt */
++// XRX200_BM_ISR_DEQ, /* PQM dequeue Interrupt Enable */
++// XRX200_BM_ISR_ENQ, /* PQM Enqueue Interrupt */
++// XRX200_BM_ISR_FSQM, /* Buffer Empty Interrupt */
++// XRX200_BM_CISEL, /* Buffer Manager RMON CounterInterrupt Select Register */
++// XRX200_BM_CISEL_PORT, /* Port Number */
++// XRX200_BM_DEBUG_CTRL_DBG, /* Debug Control Register */
++// XRX200_BM_DEBUG_CTRL_DBG_SEL, /* Select Signal for Debug Multiplexer */
++// XRX200_BM_DEBUG_VAL_DBG, /* Debug Value Register */
++// XRX200_BM_DEBUG_VAL_DBG_DAT, /* Debug Data Value */
++// XRX200_BM_PCFG, /* Buffer Manager PortConfiguration Register */
++// XRX200_BM_PCFG_CNTEN, /* RMON Counter Enable */
++// XRX200_BM_RMON_CTRL_RAM1, /* Buffer ManagerRMON Control Register */
++// XRX200_BM_RMON_CTRL_RAM2_RES, /* Software Reset for RMON RAM2 */
++// XRX200_BM_RMON_CTRL_RAM1_RES, /* Software Reset for RMON RAM1 */
++// XRX200_PQM_DP, /* Packet Queue ManagerDrop Probability Register */
++// XRX200_PQM_DP_DPROB, /* Drop Probability Profile */
++// XRX200_PQM_RS, /* Packet Queue ManagerRate Shaper Assignment Register */
++// XRX200_PQM_RS_EN2, /* Rate Shaper 2 Enable */
++// XRX200_PQM_RS_RS2, /* Rate Shaper 2 */
++// XRX200_PQM_RS_EN1, /* Rate Shaper 1 Enable */
++// XRX200_PQM_RS_RS1, /* Rate Shaper 1 */
++// XRX200_RS_CTRL, /* Rate Shaper ControlRegister */
++// XRX200_RS_CTRL_RSEN, /* Rate Shaper Enable */
++// XRX200_RS_CBS, /* Rate Shaper CommittedBurst Size Register */
++// XRX200_RS_CBS_CBS, /* Committed Burst Size */
++// XRX200_RS_IBS, /* Rate Shaper InstantaneousBurst Size Register */
++// XRX200_RS_IBS_IBS, /* Instantaneous Burst Size */
++// XRX200_RS_CIR_EXP, /* Rate Shaper RateExponent Register */
++// XRX200_RS_CIR_EXP_EXP, /* Exponent */
++// XRX200_RS_CIR_MANT, /* Rate Shaper RateMantissa Register */
++// XRX200_RS_CIR_MANT_MANT, /* Mantissa */
++ XRX200_PCE_TBL_KEY_7, /* Table Key Data 7 */
++// XRX200_PCE_TBL_KEY_7_KEY7, /* Key Value[15:0] */
++ XRX200_PCE_TBL_KEY_6, /* Table Key Data 6 */
++// XRX200_PCE_TBL_KEY_6_KEY6, /* Key Value[15:0] */
++ XRX200_PCE_TBL_KEY_5, /* Table Key Data 5 */
++// XRX200_PCE_TBL_KEY_5_KEY5, /* Key Value[15:0] */
++ XRX200_PCE_TBL_KEY_4, /* Table Key Data 4 */
++// XRX200_PCE_TBL_KEY_4_KEY4, /* Key Value[15:0] */
++ XRX200_PCE_TBL_KEY_3, /* Table Key Data 3 */
++// XRX200_PCE_TBL_KEY_3_KEY3, /* Key Value[15:0] */
++ XRX200_PCE_TBL_KEY_2, /* Table Key Data 2 */
++// XRX200_PCE_TBL_KEY_2_KEY2, /* Key Value[15:0] */
++ XRX200_PCE_TBL_KEY_1, /* Table Key Data 1 */
++// XRX200_PCE_TBL_KEY_1_KEY1, /* Key Value[31:16] */
++ XRX200_PCE_TBL_KEY_0, /* Table Key Data 0 */
++// XRX200_PCE_TBL_KEY_0_KEY0, /* Key Value[15:0] */
++ XRX200_PCE_TBL_MASK_0, /* Table Mask Write Register0 */
++// XRX200_PCE_TBL_MASK_0_MASK0, /* Mask Pattern [15:0] */
++ XRX200_PCE_TBL_VAL_4, /* Table Value Register4 */
++// XRX200_PCE_TBL_VAL_4_VAL4, /* Data value [15:0] */
++ XRX200_PCE_TBL_VAL_3, /* Table Value Register3 */
++// XRX200_PCE_TBL_VAL_3_VAL3, /* Data value [15:0] */
++ XRX200_PCE_TBL_VAL_2, /* Table Value Register2 */
++// XRX200_PCE_TBL_VAL_2_VAL2, /* Data value [15:0] */
++ XRX200_PCE_TBL_VAL_1, /* Table Value Register1 */
++// XRX200_PCE_TBL_VAL_1_VAL1, /* Data value [15:0] */
++ XRX200_PCE_TBL_VAL_0, /* Table Value Register0 */
++// XRX200_PCE_TBL_VAL_0_VAL0, /* Data value [15:0] */
++// XRX200_PCE_TBL_ADDR, /* Table Entry AddressRegister */
++ XRX200_PCE_TBL_ADDR_ADDR, /* Table Address */
++// XRX200_PCE_TBL_CTRL, /* Table Access ControlRegister */
++ XRX200_PCE_TBL_CTRL_BAS, /* Access Busy/Access Start */
++ XRX200_PCE_TBL_CTRL_TYPE, /* Lookup Entry Type */
++ XRX200_PCE_TBL_CTRL_VLD, /* Lookup Entry Valid */
++ XRX200_PCE_TBL_CTRL_GMAP, /* Group Map */
++ XRX200_PCE_TBL_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
++ XRX200_PCE_TBL_CTRL_ADDR, /* Lookup Table Address */
++// XRX200_PCE_TBL_STAT, /* Table General StatusRegister */
++// XRX200_PCE_TBL_STAT_TBUSY, /* Table Access Busy */
++// XRX200_PCE_TBL_STAT_TEMPT, /* Table Empty */
++// XRX200_PCE_TBL_STAT_TFUL, /* Table Full */
++// XRX200_PCE_AGE_0, /* Aging Counter ConfigurationRegister 0 */
++// XRX200_PCE_AGE_0_EXP, /* Aging Counter Exponent Value */
++// XRX200_PCE_AGE_1, /* Aging Counter ConfigurationRegister 1 */
++// XRX200_PCE_AGE_1_MANT, /* Aging Counter Mantissa Value */
++// XRX200_PCE_PMAP_1, /* Port Map Register 1 */
++// XRX200_PCE_PMAP_1_MPMAP, /* Monitoring Port Map */
++// XRX200_PCE_PMAP_2, /* Port Map Register 2 */
++// XRX200_PCE_PMAP_2_DMCPMAP, /* Default Multicast Port Map */
++// XRX200_PCE_PMAP_3, /* Port Map Register 3 */
++// XRX200_PCE_PMAP_3_UUCMAP, /* Default Unknown Unicast Port Map */
++// XRX200_PCE_GCTRL_0, /* PCE Global Control Register0 */
++// XRX200_PCE_GCTRL_0_IGMP, /* IGMP Mode Selection */
++ XRX200_PCE_GCTRL_0_VLAN, /* VLAN-aware Switching */
++// XRX200_PCE_GCTRL_0_NOPM, /* No Port Map Forwarding */
++// XRX200_PCE_GCTRL_0_SCONUC, /* Unknown Unicast Storm Control */
++// XRX200_PCE_GCTRL_0_SCONMC, /* Multicast Storm Control */
++// XRX200_PCE_GCTRL_0_SCONBC, /* Broadcast Storm Control */
++// XRX200_PCE_GCTRL_0_SCONMOD, /* Storm Control Mode */
++// XRX200_PCE_GCTRL_0_SCONMET, /* Storm Control Metering Instance */
++// XRX200_PCE_GCTRL_0_MC_VALID, /* Access Request */
++// XRX200_PCE_GCTRL_0_PLCKMOD, /* Port Lock Mode */
++// XRX200_PCE_GCTRL_0_PLIMMOD, /* MAC Address Learning Limitation Mode */
++// XRX200_PCE_GCTRL_0_MTFL, /* MAC Table Flushing */
++// XRX200_PCE_GCTRL_1, /* PCE Global Control Register1 */
++// XRX200_PCE_GCTRL_1_PCE_DIS, /* PCE Disable after currently processed packet */
++// XRX200_PCE_GCTRL_1_LRNMOD, /* MAC Address Learning Mode */
++// XRX200_PCE_TCM_GLOB_CTRL, /* Three-color MarkerGlobal Control Register */
++// XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */
++// XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */
++// XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */
++// XRX200_PCE_IGMP_CTRL, /* IGMP Control Register */
++// XRX200_PCE_IGMP_CTRL_FAGEEN, /* Force Aging of Table Entries Enable */
++// XRX200_PCE_IGMP_CTRL_FLEAVE, /* Fast Leave Enable */
++// XRX200_PCE_IGMP_CTRL_DMRTEN, /* Default Maximum Response Time Enable */
++// XRX200_PCE_IGMP_CTRL_JASUP, /* Join Aggregation Suppression Enable */
++// XRX200_PCE_IGMP_CTRL_REPSUP, /* Report Suppression Enable */
++// XRX200_PCE_IGMP_CTRL_SRPEN, /* Snooping of Router Port Enable */
++// XRX200_PCE_IGMP_CTRL_ROB, /* Robustness Variable */
++// XRX200_PCE_IGMP_CTRL_DMRT, /* IGMP Default Maximum Response Time */
++// XRX200_PCE_IGMP_DRPM, /* IGMP Default RouterPort Map Register */
++// XRX200_PCE_IGMP_DRPM_DRPM, /* IGMP Default Router Port Map */
++// XRX200_PCE_IGMP_AGE_0, /* IGMP Aging Register0 */
++// XRX200_PCE_IGMP_AGE_0_MANT, /* IGMP Group Aging Time Mantissa */
++// XRX200_PCE_IGMP_AGE_0_EXP, /* IGMP Group Aging Time Exponent */
++// XRX200_PCE_IGMP_AGE_1, /* IGMP Aging Register1 */
++// XRX200_PCE_IGMP_AGE_1_MANT, /* IGMP Router Port Aging Time Mantissa */
++// XRX200_PCE_IGMP_STAT, /* IGMP Status Register */
++// XRX200_PCE_IGMP_STAT_IGPM, /* IGMP Port Map */
++// XRX200_WOL_GLB_CTRL, /* Wake-on-LAN ControlRegister */
++// XRX200_WOL_GLB_CTRL_PASSEN, /* WoL Password Enable */
++// XRX200_WOL_DA_0, /* Wake-on-LAN DestinationAddress Register 0 */
++// XRX200_WOL_DA_0_DA0, /* WoL Destination Address [15:0] */
++// XRX200_WOL_DA_1, /* Wake-on-LAN DestinationAddress Register 1 */
++// XRX200_WOL_DA_1_DA1, /* WoL Destination Address [31:16] */
++// XRX200_WOL_DA_2, /* Wake-on-LAN DestinationAddress Register 2 */
++// XRX200_WOL_DA_2_DA2, /* WoL Destination Address [47:32] */
++// XRX200_WOL_PW_0, /* Wake-on-LAN Password Register0 */
++// XRX200_WOL_PW_0_PW0, /* WoL Password [15:0] */
++// XRX200_WOL_PW_1, /* Wake-on-LAN Password Register1 */
++// XRX200_WOL_PW_1_PW1, /* WoL Password [31:16] */
++// XRX200_WOL_PW_2, /* Wake-on-LAN Password Register2 */
++// XRX200_WOL_PW_2_PW2, /* WoL Password [47:32] */
++// XRX200_PCE_IER_0_PINT, /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */
++// XRX200_PCE_IER_0_PINT_15, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_14, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_13, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_12, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_11, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_10, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_9, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_8, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_7, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_6, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_5, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_4, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_3, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_2, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_1, /* Port Interrupt Enable */
++// XRX200_PCE_IER_0_PINT_0, /* Port Interrupt Enable */
++// XRX200_PCE_IER_1, /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */
++// XRX200_PCE_IER_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */
++// XRX200_PCE_IER_1_CPH2, /* Classification Phase 2 Ready Interrupt Enable */
++// XRX200_PCE_IER_1_CPH1, /* Classification Phase 1 Ready Interrupt Enable */
++// XRX200_PCE_IER_1_CPH0, /* Classification Phase 0 Ready Interrupt Enable */
++// XRX200_PCE_IER_1_PRDY, /* Parser Ready Interrupt Enable */
++// XRX200_PCE_IER_1_IGTF, /* IGMP Table Full Interrupt Enable */
++// XRX200_PCE_IER_1_MTF, /* MAC Table Full Interrupt Enable */
++// XRX200_PCE_ISR_0_PINT, /* Parser and ClassificationEngine Global Interrupt Status Register 0 */
++// XRX200_PCE_ISR_0_PINT_15, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_14, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_13, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_12, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_11, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_10, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_9, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_8, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_7, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_6, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_5, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_4, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_3, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_2, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_1, /* Port Interrupt */
++// XRX200_PCE_ISR_0_PINT_0, /* Port Interrupt */
++// XRX200_PCE_ISR_1, /* Parser and ClassificationEngine Global Interrupt Status Register 1 */
++// XRX200_PCE_ISR_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched */
++// XRX200_PCE_ISR_1_CPH2, /* Classification Phase 2 Ready Interrupt */
++// XRX200_PCE_ISR_1_CPH1, /* Classification Phase 1 Ready Interrupt */
++// XRX200_PCE_ISR_1_CPH0, /* Classification Phase 0 Ready Interrupt */
++// XRX200_PCE_ISR_1_PRDY, /* Parser Ready Interrupt */
++// XRX200_PCE_ISR_1_IGTF, /* IGMP Table Full Interrupt */
++// XRX200_PCE_ISR_1_MTF, /* MAC Table Full Interrupt */
++// XRX200_PARSER_STAT_FIFO, /* Parser Status Register */
++// XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */
++// XRX200_PARSER_STAT_FSM_STATE, /* Parser FSM State */
++// XRX200_PARSER_STAT_PKT_ERR, /* Packet error detected */
++// XRX200_PARSER_STAT_FSM_FIN, /* Parser FSM finished */
++// XRX200_PARSER_STAT_FSM_START, /* Parser FSM start */
++// XRX200_PARSER_STAT_FIFO_RDY, /* Parser FIFO ready for read. */
++// XRX200_PARSER_STAT_FIFO_FULL, /* Parser */
++// XRX200_PCE_PCTRL_0, /* PCE Port ControlRegister 0 */
++// XRX200_PCE_PCTRL_0_MCST, /* Multicast Forwarding Mode Selection */
++// XRX200_PCE_PCTRL_0_EGSTEN, /* Table-based Egress Special Tag Enable */
++// XRX200_PCE_PCTRL_0_IGSTEN, /* Ingress Special Tag Enable */
++// XRX200_PCE_PCTRL_0_PCPEN, /* PCP Remarking Mode */
++// XRX200_PCE_PCTRL_0_CLPEN, /* Class Remarking Mode */
++// XRX200_PCE_PCTRL_0_DPEN, /* Drop Precedence Remarking Mode */
++// XRX200_PCE_PCTRL_0_CMOD, /* Three-color Marker Color Mode */
++// XRX200_PCE_PCTRL_0_VREP, /* VLAN Replacement Mode */
++ XRX200_PCE_PCTRL_0_TVM, /* Transparent VLAN Mode */
++// XRX200_PCE_PCTRL_0_PLOCK, /* Port Locking Enable */
++// XRX200_PCE_PCTRL_0_AGEDIS, /* Aging Disable */
++// XRX200_PCE_PCTRL_0_PSTATE, /* Port State */
++// XRX200_PCE_PCTRL_1, /* PCE Port ControlRegister 1 */
++// XRX200_PCE_PCTRL_1_LRNLIM, /* MAC Address Learning Limit */
++// XRX200_PCE_PCTRL_2, /* PCE Port ControlRegister 2 */
++// XRX200_PCE_PCTRL_2_DSCPMOD, /* DSCP Mode Selection */
++// XRX200_PCE_PCTRL_2_DSCP, /* Enable DSCP to select the Class of Service */
++// XRX200_PCE_PCTRL_2_PCP, /* Enable VLAN PCP to select the Class of Service */
++// XRX200_PCE_PCTRL_2_PCLASS, /* Port-based Traffic Class */
++// XRX200_PCE_PCTRL_3_VIO, /* PCE Port ControlRegister 3 */
++// XRX200_PCE_PCTRL_3_EDIR, /* Egress Redirection Mode */
++// XRX200_PCE_PCTRL_3_RXDMIR, /* Receive Mirroring Enable for dropped frames */
++// XRX200_PCE_PCTRL_3_RXVMIR, /* Receive Mirroring Enable for valid frames */
++// XRX200_PCE_PCTRL_3_TXMIR, /* Transmit Mirroring Enable */
++// XRX200_PCE_PCTRL_3_VIO_7, /* Violation Type 7 Mirroring Enable */
++// XRX200_PCE_PCTRL_3_VIO_6, /* Violation Type 6 Mirroring Enable */
++// XRX200_PCE_PCTRL_3_VIO_5, /* Violation Type 5 Mirroring Enable */
++// XRX200_PCE_PCTRL_3_VIO_4, /* Violation Type 4 Mirroring Enable */
++// XRX200_PCE_PCTRL_3_VIO_3, /* Violation Type 3 Mirroring Enable */
++// XRX200_PCE_PCTRL_3_VIO_2, /* Violation Type 2 Mirroring Enable */
++// XRX200_PCE_PCTRL_3_VIO_1, /* Violation Type 1 Mirroring Enable */
++// XRX200_PCE_PCTRL_3_VIO_0, /* Violation Type 0 Mirroring Enable */
++// XRX200_WOL_CTRL, /* Wake-on-LAN ControlRegister */
++// XRX200_WOL_CTRL_PORT, /* WoL Enable */
++// XRX200_PCE_VCTRL, /* PCE VLAN ControlRegister */
++ XRX200_PCE_VCTRL_VSR, /* VLAN Security Rule */
++ XRX200_PCE_VCTRL_VEMR, /* VLAN Egress Member Violation Rule */
++ XRX200_PCE_VCTRL_VIMR, /* VLAN Ingress Member Violation Rule */
++ XRX200_PCE_VCTRL_VINR, /* VLAN Ingress Tag Rule */
++ XRX200_PCE_VCTRL_UVR, /* Unknown VLAN Rule */
++// XRX200_PCE_DEFPVID, /* PCE Default PortVID Register */
++ XRX200_PCE_DEFPVID_PVID, /* Default Port VID Index */
++// XRX200_PCE_PSTAT, /* PCE Port StatusRegister */
++// XRX200_PCE_PSTAT_LRNCNT, /* Learning Count */
++// XRX200_PCE_PIER, /* Parser and ClassificationEngine Port Interrupt Enable Register */
++// XRX200_PCE_PIER_CLDRP, /* Classification Drop Interrupt Enable */
++// XRX200_PCE_PIER_PTDRP, /* Port Drop Interrupt Enable */
++// XRX200_PCE_PIER_VLAN, /* VLAN Violation Interrupt Enable */
++// XRX200_PCE_PIER_WOL, /* Wake-on-LAN Interrupt Enable */
++// XRX200_PCE_PIER_LOCK, /* Port Limit Alert Interrupt Enable */
++// XRX200_PCE_PIER_LIM, /* Port Lock Alert Interrupt Enable */
++// XRX200_PCE_PISR, /* Parser and ClassificationEngine Port Interrupt Status Register */
++// XRX200_PCE_PISR_CLDRP, /* Classification Drop Interrupt */
++// XRX200_PCE_PISR_PTDRP, /* Port Drop Interrupt */
++// XRX200_PCE_PISR_VLAN, /* VLAN Violation Interrupt */
++// XRX200_PCE_PISR_WOL, /* Wake-on-LAN Interrupt */
++// XRX200_PCE_PISR_LOCK, /* Port Lock Alert Interrupt */
++// XRX200_PCE_PISR_LIMIT, /* Port Limitation Alert Interrupt */
++// XRX200_PCE_TCM_CTRL, /* Three-colorMarker Control Register */
++// XRX200_PCE_TCM_CTRL_TCMEN, /* Three-color Marker metering instance enable */
++// XRX200_PCE_TCM_STAT, /* Three-colorMarker Status Register */
++// XRX200_PCE_TCM_STAT_AL1, /* Three-color Marker Alert 1 Status */
++// XRX200_PCE_TCM_STAT_AL0, /* Three-color Marker Alert 0 Status */
++// XRX200_PCE_TCM_CBS, /* Three-color MarkerCommitted Burst Size Register */
++// XRX200_PCE_TCM_CBS_CBS, /* Committed Burst Size */
++// XRX200_PCE_TCM_EBS, /* Three-color MarkerExcess Burst Size Register */
++// XRX200_PCE_TCM_EBS_EBS, /* Excess Burst Size */
++// XRX200_PCE_TCM_IBS, /* Three-color MarkerInstantaneous Burst Size Register */
++// XRX200_PCE_TCM_IBS_IBS, /* Instantaneous Burst Size */
++// XRX200_PCE_TCM_CIR_MANT, /* Three-colorMarker Constant Information Rate Mantissa Register */
++// XRX200_PCE_TCM_CIR_MANT_MANT, /* Rate Counter Mantissa */
++// XRX200_PCE_TCM_CIR_EXP, /* Three-colorMarker Constant Information Rate Exponent Register */
++// XRX200_PCE_TCM_CIR_EXP_EXP, /* Rate Counter Exponent */
++// XRX200_MAC_TEST, /* MAC Test Register */
++// XRX200_MAC_TEST_JTP, /* Jitter Test Pattern */
++// XRX200_MAC_PFAD_CFG, /* MAC Pause FrameSource Address Configuration Register */
++// XRX200_MAC_PFAD_CFG_SAMOD, /* Source Address Mode */
++// XRX200_MAC_PFSA_0, /* Pause Frame SourceAddress Part 0 */
++// XRX200_MAC_PFSA_0_PFAD, /* Pause Frame Source Address Part 0 */
++// XRX200_MAC_PFSA_1, /* Pause Frame SourceAddress Part 1 */
++// XRX200_MAC_PFSA_1_PFAD, /* Pause Frame Source Address Part 1 */
++// XRX200_MAC_PFSA_2, /* Pause Frame SourceAddress Part 2 */
++// XRX200_MAC_PFSA_2_PFAD, /* Pause Frame Source Address Part 2 */
++// XRX200_MAC_FLEN, /* MAC Frame Length Register */
++// XRX200_MAC_FLEN_LEN, /* Maximum Frame Length */
++// XRX200_MAC_VLAN_ETYPE_0, /* MAC VLAN EthertypeRegister 0 */
++// XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */
++// XRX200_MAC_VLAN_ETYPE_1, /* MAC VLAN EthertypeRegister 1 */
++// XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */
++// XRX200_MAC_IER, /* MAC Interrupt EnableRegister */
++// XRX200_MAC_IER_MACIEN, /* MAC Interrupt Enable */
++// XRX200_MAC_ISR, /* MAC Interrupt StatusRegister */
++// XRX200_MAC_ISR_MACINT, /* MAC Interrupt */
++// XRX200_MAC_PSTAT, /* MAC Port Status Register */
++// XRX200_MAC_PSTAT_PACT, /* PHY Active Status */
++ XRX200_MAC_PSTAT_GBIT, /* Gigabit Speed Status */
++ XRX200_MAC_PSTAT_MBIT, /* Megabit Speed Status */
++ XRX200_MAC_PSTAT_FDUP, /* Full Duplex Status */
++// XRX200_MAC_PSTAT_RXPAU, /* Receive Pause Status */
++// XRX200_MAC_PSTAT_TXPAU, /* Transmit Pause Status */
++// XRX200_MAC_PSTAT_RXPAUEN, /* Receive Pause Enable Status */
++// XRX200_MAC_PSTAT_TXPAUEN, /* Transmit Pause Enable Status */
++ XRX200_MAC_PSTAT_LSTAT, /* Link Status */
++// XRX200_MAC_PSTAT_CRS, /* Carrier Sense Status */
++// XRX200_MAC_PSTAT_TXLPI, /* Transmit Low-power Idle Status */
++// XRX200_MAC_PSTAT_RXLPI, /* Receive Low-power Idle Status */
++// XRX200_MAC_PISR, /* MAC Interrupt Status Register */
++// XRX200_MAC_PISR_PACT, /* PHY Active Status */
++// XRX200_MAC_PISR_SPEED, /* Megabit Speed Status */
++// XRX200_MAC_PISR_FDUP, /* Full Duplex Status */
++// XRX200_MAC_PISR_RXPAUEN, /* Receive Pause Enable Status */
++// XRX200_MAC_PISR_TXPAUEN, /* Transmit Pause Enable Status */
++// XRX200_MAC_PISR_LPIOFF, /* Receive Low-power Idle Mode is left */
++// XRX200_MAC_PISR_LPION, /* Receive Low-power Idle Mode is entered */
++// XRX200_MAC_PISR_JAM, /* Jam Status Detected */
++// XRX200_MAC_PISR_TOOSHORT, /* Too Short Frame Error Detected */
++// XRX200_MAC_PISR_TOOLONG, /* Too Long Frame Error Detected */
++// XRX200_MAC_PISR_LENERR, /* Length Mismatch Error Detected */
++// XRX200_MAC_PISR_FCSERR, /* Frame Checksum Error Detected */
++// XRX200_MAC_PISR_TXPAUSE, /* Pause Frame Transmitted */
++// XRX200_MAC_PISR_RXPAUSE, /* Pause Frame Received */
++// XRX200_MAC_PIER, /* MAC Interrupt Enable Register */
++// XRX200_MAC_PIER_PACT, /* PHY Active Status */
++// XRX200_MAC_PIER_SPEED, /* Megabit Speed Status */
++// XRX200_MAC_PIER_FDUP, /* Full Duplex Status */
++// XRX200_MAC_PIER_RXPAUEN, /* Receive Pause Enable Status */
++// XRX200_MAC_PIER_TXPAUEN, /* Transmit Pause Enable Status */
++// XRX200_MAC_PIER_LPIOFF, /* Low-power Idle Off Interrupt Mask */
++// XRX200_MAC_PIER_LPION, /* Low-power Idle On Interrupt Mask */
++// XRX200_MAC_PIER_JAM, /* Jam Status Interrupt Mask */
++// XRX200_MAC_PIER_TOOSHORT, /* Too Short Frame Error Interrupt Mask */
++// XRX200_MAC_PIER_TOOLONG, /* Too Long Frame Error Interrupt Mask */
++// XRX200_MAC_PIER_LENERR, /* Length Mismatch Error Interrupt Mask */
++// XRX200_MAC_PIER_FCSERR, /* Frame Checksum Error Interrupt Mask */
++// XRX200_MAC_PIER_TXPAUSE, /* Transmit Pause Frame Interrupt Mask */
++// XRX200_MAC_PIER_RXPAUSE, /* Receive Pause Frame Interrupt Mask */
++// XRX200_MAC_CTRL_0, /* MAC Control Register0 */
++// XRX200_MAC_CTRL_0_LCOL, /* Late Collision Control */
++// XRX200_MAC_CTRL_0_BM, /* Burst Mode Control */
++// XRX200_MAC_CTRL_0_APADEN, /* Automatic VLAN Padding Enable */
++// XRX200_MAC_CTRL_0_VPAD2EN, /* Stacked VLAN Padding Enable */
++// XRX200_MAC_CTRL_0_VPADEN, /* VLAN Padding Enable */
++// XRX200_MAC_CTRL_0_PADEN, /* Padding Enable */
++// XRX200_MAC_CTRL_0_FCS, /* Transmit FCS Control */
++ XRX200_MAC_CTRL_0_FCON, /* Flow Control Mode */
++// XRX200_MAC_CTRL_0_FDUP, /* Full Duplex Control */
++// XRX200_MAC_CTRL_0_GMII, /* GMII/MII interface mode selection */
++// XRX200_MAC_CTRL_1, /* MAC Control Register1 */
++// XRX200_MAC_CTRL_1_SHORTPRE, /* Short Preamble Control */
++// XRX200_MAC_CTRL_1_IPG, /* Minimum Inter Packet Gap Size */
++// XRX200_MAC_CTRL_2, /* MAC Control Register2 */
++// XRX200_MAC_CTRL_2_MLEN, /* Maximum Untagged Frame Length */
++// XRX200_MAC_CTRL_2_LCHKL, /* Frame Length Check Long Enable */
++// XRX200_MAC_CTRL_2_LCHKS, /* Frame Length Check Short Enable */
++// XRX200_MAC_CTRL_3, /* MAC Control Register3 */
++// XRX200_MAC_CTRL_3_RCNT, /* Retry Count */
++// XRX200_MAC_CTRL_4, /* MAC Control Register4 */
++// XRX200_MAC_CTRL_4_LPIEN, /* LPI Mode Enable */
++// XRX200_MAC_CTRL_4_WAIT, /* LPI Wait Time */
++// XRX200_MAC_CTRL_5_PJPS, /* MAC Control Register5 */
++// XRX200_MAC_CTRL_5_PJPS_NOBP, /* Prolonged Jam pattern size during no-backpressure state */
++// XRX200_MAC_CTRL_5_PJPS_BP, /* Prolonged Jam pattern size during backpressure state */
++// XRX200_MAC_CTRL_6_XBUF, /* Transmit and ReceiveBuffer Control Register */
++// XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */
++// XRX200_MAC_CTRL_6_RBUF_INIT, /* Receive Buffer Initialization */
++// XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */
++// XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */
++// XRX200_MAC_CTRL_6_XBUF_INIT, /* Initialize the Transmit Buffer */
++// XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */
++// XRX200_MAC_BUFST_XBUF, /* MAC Receive and TransmitBuffer Status Register */
++// XRX200_MAC_BUFST_RBUF_UFL, /* Receive Buffer Underflow Indicator */
++// XRX200_MAC_BUFST_RBUF_OFL, /* Receive Buffer Overflow Indicator */
++// XRX200_MAC_BUFST_XBUF_UFL, /* Transmit Buffer Underflow Indicator */
++// XRX200_MAC_BUFST_XBUF_OFL, /* Transmit Buffer Overflow Indicator */
++// XRX200_MAC_TESTEN, /* MAC Test Enable Register */
++// XRX200_MAC_TESTEN_JTEN, /* Jitter Test Enable */
++// XRX200_MAC_TESTEN_TXER, /* Transmit Error Insertion */
++// XRX200_MAC_TESTEN_LOOP, /* MAC Loopback Enable */
++// XRX200_FDMA_CTRL, /* Ethernet Switch FetchDMA Control Register */
++// XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */
++// XRX200_FDMA_CTRL_LPI_MODE, /* Low Power Idle Mode */
++// XRX200_FDMA_CTRL_EGSTAG, /* Egress Special Tag Size */
++// XRX200_FDMA_CTRL_IGSTAG, /* Ingress Special Tag Size */
++// XRX200_FDMA_CTRL_EXCOL, /* Excessive Collision Handling */
++// XRX200_FDMA_STETYPE, /* Special Tag EthertypeControl Register */
++// XRX200_FDMA_STETYPE_ETYPE, /* Special Tag Ethertype */
++// XRX200_FDMA_VTETYPE, /* VLAN Tag EthertypeControl Register */
++// XRX200_FDMA_VTETYPE_ETYPE, /* VLAN Tag Ethertype */
++// XRX200_FDMA_STAT_0, /* FDMA Status Register0 */
++// XRX200_FDMA_STAT_0_FSMS, /* FSM states status */
++// XRX200_FDMA_IER, /* Fetch DMA Global InterruptEnable Register */
++// XRX200_FDMA_IER_PCKD, /* Packet Drop Interrupt Enable */
++// XRX200_FDMA_IER_PCKR, /* Packet Ready Interrupt Enable */
++// XRX200_FDMA_IER_PCKT, /* Packet Sent Interrupt Enable */
++// XRX200_FDMA_ISR, /* Fetch DMA Global InterruptStatus Register */
++// XRX200_FDMA_ISR_PCKTD, /* Packet Drop */
++// XRX200_FDMA_ISR_PCKR, /* Packet is Ready for Transmission */
++// XRX200_FDMA_ISR_PCKT, /* Packet Sent Event */
++// XRX200_FDMA_PCTRL, /* Ethernet SwitchFetch DMA Port Control Register */
++// XRX200_FDMA_PCTRL_VLANMOD, /* VLAN Modification Enable */
++// XRX200_FDMA_PCTRL_DSCPRM, /* DSCP Re-marking Enable */
++// XRX200_FDMA_PCTRL_STEN, /* Special Tag Insertion Enable */
++// XRX200_FDMA_PCTRL_EN, /* FDMA Port Enable */
++// XRX200_FDMA_PRIO, /* Ethernet SwitchFetch DMA Port Priority Register */
++// XRX200_FDMA_PRIO_PRIO, /* FDMA PRIO */
++// XRX200_FDMA_PSTAT0, /* Ethernet SwitchFetch DMA Port Status Register 0 */
++// XRX200_FDMA_PSTAT0_PKT_AVAIL, /* Port Egress Packet Available */
++// XRX200_FDMA_PSTAT0_POK, /* Port Status OK */
++// XRX200_FDMA_PSTAT0_PSEG, /* Port Egress Segment Count */
++// XRX200_FDMA_PSTAT1_HDR, /* Ethernet SwitchFetch DMA Port Status Register 1 */
++// XRX200_FDMA_PSTAT1_HDR_PTR, /* Header Pointer */
++// XRX200_FDMA_TSTAMP0, /* Egress TimeStamp Register 0 */
++// XRX200_FDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
++// XRX200_FDMA_TSTAMP1, /* Egress TimeStamp Register 1 */
++// XRX200_FDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
++// XRX200_SDMA_CTRL, /* Ethernet Switch StoreDMA Control Register */
++// XRX200_SDMA_CTRL_TSTEN, /* Time Stamp Enable */
++// XRX200_SDMA_FCTHR1, /* SDMA Flow Control Threshold1 Register */
++// XRX200_SDMA_FCTHR1_THR1, /* Threshold 1 */
++// XRX200_SDMA_FCTHR2, /* SDMA Flow Control Threshold2 Register */
++// XRX200_SDMA_FCTHR2_THR2, /* Threshold 2 */
++// XRX200_SDMA_FCTHR3, /* SDMA Flow Control Threshold3 Register */
++// XRX200_SDMA_FCTHR3_THR3, /* Threshold 3 */
++// XRX200_SDMA_FCTHR4, /* SDMA Flow Control Threshold4 Register */
++// XRX200_SDMA_FCTHR4_THR4, /* Threshold 4 */
++// XRX200_SDMA_FCTHR5, /* SDMA Flow Control Threshold5 Register */
++// XRX200_SDMA_FCTHR5_THR5, /* Threshold 5 */
++// XRX200_SDMA_FCTHR6, /* SDMA Flow Control Threshold6 Register */
++// XRX200_SDMA_FCTHR6_THR6, /* Threshold 6 */
++// XRX200_SDMA_FCTHR7, /* SDMA Flow Control Threshold7 Register */
++// XRX200_SDMA_FCTHR7_THR7, /* Threshold 7 */
++// XRX200_SDMA_STAT_0, /* SDMA Status Register0 */
++// XRX200_SDMA_STAT_0_BPS_FILL, /* Back Pressure Status */
++// XRX200_SDMA_STAT_0_BPS_PNT, /* Back Pressure Status */
++// XRX200_SDMA_STAT_0_DROP, /* Back Pressure Status */
++// XRX200_SDMA_STAT_1, /* SDMA Status Register1 */
++// XRX200_SDMA_STAT_1_FILL, /* Buffer Filling Level */
++// XRX200_SDMA_STAT_2, /* SDMA Status Register2 */
++// XRX200_SDMA_STAT_2_FSMS, /* FSM states status */
++// XRX200_SDMA_IER, /* SDMA Interrupt Enable Register */
++// XRX200_SDMA_IER_BPEX, /* Buffer Pointers Exceeded */
++// XRX200_SDMA_IER_BFULL, /* Buffer Full */
++// XRX200_SDMA_IER_FERR, /* Frame Error */
++// XRX200_SDMA_IER_FRX, /* Frame Received Successfully */
++// XRX200_SDMA_ISR, /* SDMA Interrupt Status Register */
++// XRX200_SDMA_ISR_BPEX, /* Packet Descriptors Exceeded */
++// XRX200_SDMA_ISR_BFULL, /* Buffer Full */
++// XRX200_SDMA_ISR_FERR, /* Frame Error */
++// XRX200_SDMA_ISR_FRX, /* Frame Received Successfully */
++// XRX200_SDMA_PCTRL, /* Ethernet SwitchStore DMA Port Control Register */
++// XRX200_SDMA_PCTRL_DTHR, /* Drop Threshold Selection */
++// XRX200_SDMA_PCTRL_PTHR, /* Pause Threshold Selection */
++// XRX200_SDMA_PCTRL_PHYEFWD, /* Forward PHY Error Frames */
++// XRX200_SDMA_PCTRL_ALGFWD, /* Forward Alignment Error Frames */
++// XRX200_SDMA_PCTRL_LENFWD, /* Forward Length Errored Frames */
++// XRX200_SDMA_PCTRL_OSFWD, /* Forward Oversized Frames */
++// XRX200_SDMA_PCTRL_USFWD, /* Forward Undersized Frames */
++// XRX200_SDMA_PCTRL_FCSIGN, /* Ignore FCS Errors */
++// XRX200_SDMA_PCTRL_FCSFWD, /* Forward FCS Errored Frames */
++// XRX200_SDMA_PCTRL_PAUFWD, /* Pause Frame Forwarding */
++// XRX200_SDMA_PCTRL_MFCEN, /* Metering Flow Control Enable */
++// XRX200_SDMA_PCTRL_FCEN, /* Flow Control Enable */
++// XRX200_SDMA_PCTRL_PEN, /* Port Enable */
++// XRX200_SDMA_PRIO, /* Ethernet SwitchStore DMA Port Priority Register */
++// XRX200_SDMA_PRIO_PRIO, /* SDMA PRIO */
++// XRX200_SDMA_PSTAT0_HDR, /* Ethernet SwitchStore DMA Port Status Register 0 */
++// XRX200_SDMA_PSTAT0_HDR_PTR, /* Port Ingress Queue Header Pointer */
++// XRX200_SDMA_PSTAT1, /* Ethernet SwitchStore DMA Port Status Register 1 */
++// XRX200_SDMA_PSTAT1_PPKT, /* Port Ingress Packet Count */
++// XRX200_SDMA_TSTAMP0, /* Ingress TimeStamp Register 0 */
++// XRX200_SDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
++// XRX200_SDMA_TSTAMP1, /* Ingress TimeStamp Register 1 */
++// XRX200_SDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
++};
++
++
++struct xrx200sw_reg {
++ int offset;
++ int shift;
++ int size;
++ int mult;
++} xrx200sw_reg[] = {
++// offeset shift size mult
++// {0x0000, 0, 16, 0x00}, /* XRX200_ETHSW_SWRES Ethernet Switch ResetControl Register */
++// {0x0000, 1, 1, 0x00}, /* XRX200_ETHSW_SWRES_R1 Hardware Reset */
++// {0x0000, 0, 1, 0x00}, /* XRX200_ETHSW_SWRES_R0 Register Configuration */
++// {0x0004, 0, 16, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT Ethernet Switch Clock ControlRegister */
++// {0x0004, 12, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP Exponent to put system into sleep */
++// {0x0004, 8, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE Exponent to wake up system */
++// {0x0004, 7, 1, 0x00}, /* XRX200_ETHSW_CLK_CLK2_EN CLK2 Input for MAC */
++// {0x0004, 6, 1, 0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN External Clock Divider Enable */
++// {0x0004, 5, 1, 0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN Clock Gating Enable */
++// {0x0004, 4, 1, 0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN Clock Gating Enable */
++// {0x0004, 3, 1, 0x00}, /* XRX200_ETHSW_CLK_GAT_EN Clock Gating Enable */
++// {0x0004, 2, 1, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN Clock Gating Enable */
++// {0x0008, 0, 16, 0x00}, /* XRX200_ETHSW_DBG_STEP Ethernet Switch Debug ControlRegister */
++// {0x0008, 12, 4, 0x00}, /* XRX200_ETHSW_DBG_CLK_SEL Trigger Enable */
++// {0x0008, 11, 1, 0x00}, /* XRX200_ETHSW_DBG_MON_EN Monitoring Enable */
++// {0x0008, 9, 2, 0x00}, /* XRX200_ETHSW_DBG_TRIG_EN Trigger Enable */
++// {0x0008, 8, 1, 0x00}, /* XRX200_ETHSW_DBG_MODE Debug Mode */
++// {0x0008, 0, 8, 0x00}, /* XRX200_ETHSW_DBG_STEP_TIME Clock Step Size */
++// {0x000C, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_MODE Ethernet Switch SharedSegment Buffer Mode Register */
++// {0x000C, 2, 4, 0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE Memory Address */
++// {0x000C, 0, 2, 0x00}, /* XRX200_ETHSW_SSB_MODE_MODE Memory Access Mode */
++// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR Ethernet Switch SharedSegment Buffer Address Register */
++// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE Memory Address */
++// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA Ethernet Switch SharedSegment Buffer Data Register */
++// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA_DATA Data Value */
++// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0 Ethernet Switch CapabilityRegister 0 */
++// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0_SPEED Clock frequency */
++// {0x001C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_1 Ethernet Switch CapabilityRegister 1 */
++// {0x001C, 15, 1, 0x00}, /* XRX200_ETHSW_CAP_1_GMAC MAC operation mode */
++// {0x001C, 8, 7, 0x00}, /* XRX200_ETHSW_CAP_1_QUEUE Number of queues */
++// {0x001C, 4, 4, 0x00}, /* XRX200_ETHSW_CAP_1_VPORTS Number of virtual ports */
++// {0x001C, 0, 4, 0x00}, /* XRX200_ETHSW_CAP_1_PPORTS Number of physical ports */
++// {0x0020, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_2 Ethernet Switch CapabilityRegister 2 */
++// {0x0020, 0, 11, 0x00}, /* XRX200_ETHSW_CAP_2_PACKETS Number of packets */
++// {0x0024, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_3 Ethernet Switch CapabilityRegister 3 */
++// {0x0024, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_3_METERS Number of traffic meters */
++// {0x0024, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS Number of traffic shapers */
++// {0x0028, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_4 Ethernet Switch CapabilityRegister 4 */
++// {0x0028, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_4_PPPOE PPPoE table size */
++// {0x0028, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_4_VLAN Active VLAN table size */
++// {0x002C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_5 Ethernet Switch CapabilityRegister 5 */
++// {0x002C, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN IP packet length table size */
++// {0x002C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_5_PROT Protocol table size */
++// {0x0030, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_6 Ethernet Switch CapabilityRegister 6 */
++// {0x0030, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_6_MACDASA MAC DA/SA table size */
++// {0x0030, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_6_APPL Application table size */
++// {0x0034, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_7 Ethernet Switch CapabilityRegister 7 */
++// {0x0034, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM IP DA/SA MSB table size */
++// {0x0034, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL IP DA/SA LSB table size */
++// {0x0038, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_8 Ethernet Switch CapabilityRegister 8 */
++// {0x0038, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_8_MCAST Multicast table size */
++// {0x003C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_9 Ethernet Switch CapabilityRegister 9 */
++// {0x003C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_9_FLAGG Flow Aggregation table size */
++// {0x0040, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_10 Ethernet Switch CapabilityRegister 10 */
++// {0x0040, 0, 13, 0x00}, /* XRX200_ETHSW_CAP_10_MACBT MAC bridging table size */
++// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11 Ethernet Switch CapabilityRegister 11 */
++// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL Packet buffer size (lower part, in byte) */
++// {0x0048, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_12 Ethernet Switch CapabilityRegister 12 */
++// {0x0048, 0, 3, 0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH Packet buffer size (higher part, in byte) */
++// {0x004C, 0, 16, 0x00}, /* XRX200_ETHSW_VERSION_REV Ethernet Switch VersionRegister */
++// {0x004C, 8, 8, 0x00}, /* XRX200_ETHSW_VERSION_MOD_ID Module Identification */
++// {0x004C, 0, 8, 0x00}, /* XRX200_ETHSW_VERSION_REV_ID Hardware Revision Identification */
++// {0x0050, 0, 16, 0x00}, /* XRX200_ETHSW_IER Interrupt Enable Register */
++// {0x0050, 4, 1, 0x00}, /* XRX200_ETHSW_IER_FDMAIE Fetch DMA Interrupt Enable */
++// {0x0050, 3, 1, 0x00}, /* XRX200_ETHSW_IER_SDMAIE Store DMA Interrupt Enable */
++// {0x0050, 2, 1, 0x00}, /* XRX200_ETHSW_IER_MACIE Ethernet MAC Interrupt Enable */
++// {0x0050, 1, 1, 0x00}, /* XRX200_ETHSW_IER_PCEIE Parser and Classification Engine Interrupt Enable */
++// {0x0050, 0, 1, 0x00}, /* XRX200_ETHSW_IER_BMIE Buffer Manager Interrupt Enable */
++// {0x0054, 0, 16, 0x00}, /* XRX200_ETHSW_ISR Interrupt Status Register */
++// {0x0054, 4, 1, 0x00}, /* XRX200_ETHSW_ISR_FDMAINT Fetch DMA Interrupt */
++// {0x0054, 3, 1, 0x00}, /* XRX200_ETHSW_ISR_SDMAINT Store DMA Interrupt */
++// {0x0054, 2, 1, 0x00}, /* XRX200_ETHSW_ISR_MACINT Ethernet MAC Interrupt */
++// {0x0054, 1, 1, 0x00}, /* XRX200_ETHSW_ISR_PCEINT Parser and Classification Engine Interrupt */
++// {0x0054, 0, 1, 0x00}, /* XRX200_ETHSW_ISR_BMINT Buffer Manager Interrupt */
++// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0 Ethernet Switch SpareCells 0 */
++// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0_SPARE SPARE0 */
++// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1 Ethernet Switch SpareCells 1 */
++// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1_SPARE SPARE1 */
++// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2 Ethernet Switch SpareCells 2 */
++// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2_SPARE SPARE2 */
++// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3 Ethernet Switch SpareCells 3 */
++// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3_SPARE SPARE3 */
++// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4 Ethernet Switch SpareCells 4 */
++// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4_SPARE SPARE4 */
++// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5 Ethernet Switch SpareCells 5 */
++// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5_SPARE SPARE5 */
++// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6 Ethernet Switch SpareCells 6 */
++// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6_SPARE SPARE6 */
++// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7 Ethernet Switch SpareCells 7 */
++// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7_SPARE SPARE7 */
++// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8 Ethernet Switch SpareCells 8 */
++// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8_SPARE SPARE8 */
++// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9 Ethernet Switch SpareCells 9 */
++// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9_SPARE SPARE9 */
++// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10 Ethernet Switch SpareCells 10 */
++// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10_SPARE SPARE10 */
++// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11 Ethernet Switch SpareCells 11 */
++// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11_SPARE SPARE11 */
++// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12 Ethernet Switch SpareCells 12 */
++// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12_SPARE SPARE12 */
++// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13 Ethernet Switch SpareCells 13 */
++// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13_SPARE SPARE13 */
++// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14 Ethernet Switch SpareCells 14 */
++// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14_SPARE SPARE14 */
++// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15 Ethernet Switch SpareCells 15 */
++// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15_SPARE SPARE15 */
++// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3 RAM Value Register 3 */
++// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3_VAL3 Data value [15:0] */
++// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2 RAM Value Register 2 */
++// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2_VAL2 Data value [15:0] */
++// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1 RAM Value Register 1 */
++// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1_VAL1 Data value [15:0] */
++// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0 RAM Value Register 0 */
++// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0_VAL0 Data value [15:0] */
++// {0x0110, 0, 16, 0x00}, /* XRX200_BM_RAM_ADDR RAM Address Register */
++// {0x0110, 0, 11, 0x00}, /* XRX200_BM_RAM_ADDR_ADDR RAM Address */
++// {0x0114, 0, 16, 0x00}, /* XRX200_BM_RAM_CTRL RAM Access Control Register */
++// {0x0114, 15, 1, 0x00}, /* XRX200_BM_RAM_CTRL_BAS Access Busy/Access Start */
++// {0x0114, 5, 1, 0x00}, /* XRX200_BM_RAM_CTRL_OPMOD Lookup Table Access Operation Mode */
++// {0x0114, 0, 5, 0x00}, /* XRX200_BM_RAM_CTRL_ADDR Address for RAM selection */
++// {0x0118, 0, 16, 0x00}, /* XRX200_BM_FSQM_GCTRL Free Segment Queue ManagerGlobal Control Register */
++// {0x0118, 0, 10, 0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM Maximum Segment Number */
++// {0x011C, 0, 16, 0x00}, /* XRX200_BM_CONS_SEG Number of Consumed SegmentsRegister */
++// {0x011C, 0, 10, 0x00}, /* XRX200_BM_CONS_SEG_FSEG Number of Consumed Segments */
++// {0x0120, 0, 16, 0x00}, /* XRX200_BM_CONS_PKT Number of Consumed PacketPointers Register */
++// {0x0120, 0, 11, 0x00}, /* XRX200_BM_CONS_PKT_FQP Number of Consumed Packet Pointers */
++// {0x0124, 0, 16, 0x00}, /* XRX200_BM_GCTRL_F Buffer Manager Global ControlRegister 0 */
++// {0x0124, 13, 1, 0x00}, /* XRX200_BM_GCTRL_BM_STA Buffer Manager Initialization Status Bit */
++// {0x0124, 12, 1, 0x00}, /* XRX200_BM_GCTRL_SAT RMON Counter Update Mode */
++// {0x0124, 11, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RBC Freeze RMON RX Bad Byte 64 Bit Counter */
++// {0x0124, 10, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RGC Freeze RMON RX Good Byte 64 Bit Counter */
++// {0x0124, 9, 1, 0x00}, /* XRX200_BM_GCTRL_FR_TGC Freeze RMON TX Good Byte 64 Bit Counter */
++// {0x0124, 8, 1, 0x00}, /* XRX200_BM_GCTRL_I_FIN RAM initialization finished */
++// {0x0124, 7, 1, 0x00}, /* XRX200_BM_GCTRL_CX_INI PQM Context RAM initialization */
++// {0x0124, 6, 1, 0x00}, /* XRX200_BM_GCTRL_FP_INI FPQM RAM initialization */
++// {0x0124, 5, 1, 0x00}, /* XRX200_BM_GCTRL_FS_INI FSQM RAM initialization */
++// {0x0124, 4, 1, 0x00}, /* XRX200_BM_GCTRL_R_SRES Software Reset for RMON */
++// {0x0124, 3, 1, 0x00}, /* XRX200_BM_GCTRL_S_SRES Software Reset for Scheduler */
++// {0x0124, 2, 1, 0x00}, /* XRX200_BM_GCTRL_A_SRES Software Reset for AVG */
++// {0x0124, 1, 1, 0x00}, /* XRX200_BM_GCTRL_P_SRES Software Reset for PQM */
++// {0x0124, 0, 1, 0x00}, /* XRX200_BM_GCTRL_F_SRES Software Reset for FSQM */
++// {0x0128, 0, 16, 0x00}, /* XRX200_BM_QUEUE_GCTRL Queue Manager GlobalControl Register 0 */
++// {0x0128, 10, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD WRED Mode Signal */
++// {0x0128, 7, 3, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI Average Queue Update Interval */
++// {0x0128, 3, 4, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF Average Queue Weight Factor */
++// {0x0128, 2, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN Queue Average Calculation Enable */
++// {0x0128, 0, 2, 0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB Drop Probability Profile */
++// {0x012C, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_0 WRED Red Threshold Register0 */
++// {0x012C, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_0_MINTH Minimum Threshold */
++// {0x0130, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_1 WRED Red Threshold Register1 */
++// {0x0130, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH Maximum Threshold */
++// {0x0134, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_0 WRED Yellow ThresholdRegister 0 */
++// {0x0134, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_0_MINTH Minimum Threshold */
++// {0x0138, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_1 WRED Yellow ThresholdRegister 1 */
++// {0x0138, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH Maximum Threshold */
++// {0x013C, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_0 WRED Green ThresholdRegister 0 */
++// {0x013C, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_0_MINTH Minimum Threshold */
++// {0x0140, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_1 WRED Green ThresholdRegister 1 */
++// {0x0140, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH Maximum Threshold */
++// {0x0144, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_0_THR Drop Threshold ConfigurationRegister 0 */
++// {0x0144, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ Threshold for frames marked red */
++// {0x0148, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_1_THY Drop Threshold ConfigurationRegister 1 */
++// {0x0148, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ Threshold for frames marked yellow */
++// {0x014C, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_2_THG Drop Threshold ConfigurationRegister 2 */
++// {0x014C, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ Threshold for frames marked green */
++// {0x0150, 0, 16, 0x00}, /* XRX200_BM_IER Buffer Manager Global InterruptEnable Register */
++// {0x0150, 7, 1, 0x00}, /* XRX200_BM_IER_CNT4 Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
++// {0x0150, 6, 1, 0x00}, /* XRX200_BM_IER_CNT3 Counter Group 3 (RMON-PQM) Interrupt Enable */
++// {0x0150, 5, 1, 0x00}, /* XRX200_BM_IER_CNT2 Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
++// {0x0150, 4, 1, 0x00}, /* XRX200_BM_IER_CNT1 Counter Group 1 (RMON-QFETCH) Interrupt Enable */
++// {0x0150, 3, 1, 0x00}, /* XRX200_BM_IER_CNT0 Counter Group 0 (RMON-QSTOR) Interrupt Enable */
++// {0x0150, 2, 1, 0x00}, /* XRX200_BM_IER_DEQ PQM dequeue Interrupt Enable */
++// {0x0150, 1, 1, 0x00}, /* XRX200_BM_IER_ENQ PQM Enqueue Interrupt Enable */
++// {0x0150, 0, 1, 0x00}, /* XRX200_BM_IER_FSQM Buffer Empty Interrupt Enable */
++// {0x0154, 0, 16, 0x00}, /* XRX200_BM_ISR Buffer Manager Global InterruptStatus Register */
++// {0x0154, 7, 1, 0x00}, /* XRX200_BM_ISR_CNT4 Counter Group 4 Interrupt */
++// {0x0154, 6, 1, 0x00}, /* XRX200_BM_ISR_CNT3 Counter Group 3 Interrupt */
++// {0x0154, 5, 1, 0x00}, /* XRX200_BM_ISR_CNT2 Counter Group 2 Interrupt */
++// {0x0154, 4, 1, 0x00}, /* XRX200_BM_ISR_CNT1 Counter Group 1 Interrupt */
++// {0x0154, 3, 1, 0x00}, /* XRX200_BM_ISR_CNT0 Counter Group 0 Interrupt */
++// {0x0154, 2, 1, 0x00}, /* XRX200_BM_ISR_DEQ PQM dequeue Interrupt Enable */
++// {0x0154, 1, 1, 0x00}, /* XRX200_BM_ISR_ENQ PQM Enqueue Interrupt */
++// {0x0154, 0, 1, 0x00}, /* XRX200_BM_ISR_FSQM Buffer Empty Interrupt */
++// {0x0158, 0, 16, 0x00}, /* XRX200_BM_CISEL Buffer Manager RMON CounterInterrupt Select Register */
++// {0x0158, 0, 3, 0x00}, /* XRX200_BM_CISEL_PORT Port Number */
++// {0x015C, 0, 16, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG Debug Control Register */
++// {0x015C, 0, 8, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL Select Signal for Debug Multiplexer */
++// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG Debug Value Register */
++// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT Debug Data Value */
++// {0x0200, 0, 16, 0x08}, /* XRX200_BM_PCFG Buffer Manager PortConfiguration Register */
++// {0x0200, 0, 1, 0x08}, /* XRX200_BM_PCFG_CNTEN RMON Counter Enable */
++// {0x0204, 0, 16, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1 Buffer ManagerRMON Control Register */
++// {0x0204, 1, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES Software Reset for RMON RAM2 */
++// {0x0204, 0, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES Software Reset for RMON RAM1 */
++// {0x0400, 0, 16, 0x08}, /* XRX200_PQM_DP Packet Queue ManagerDrop Probability Register */
++// {0x0400, 0, 2, 0x08}, /* XRX200_PQM_DP_DPROB Drop Probability Profile */
++// {0x0404, 0, 16, 0x08}, /* XRX200_PQM_RS Packet Queue ManagerRate Shaper Assignment Register */
++// {0x0404, 15, 1, 0x08}, /* XRX200_PQM_RS_EN2 Rate Shaper 2 Enable */
++// {0x0404, 8, 6, 0x08}, /* XRX200_PQM_RS_RS2 Rate Shaper 2 */
++// {0x0404, 7, 1, 0x08}, /* XRX200_PQM_RS_EN1 Rate Shaper 1 Enable */
++// {0x0404, 0, 6, 0x08}, /* XRX200_PQM_RS_RS1 Rate Shaper 1 */
++// {0x0500, 0, 16, 0x14}, /* XRX200_RS_CTRL Rate Shaper ControlRegister */
++// {0x0500, 0, 1, 0x14}, /* XRX200_RS_CTRL_RSEN Rate Shaper Enable */
++// {0x0504, 0, 16, 0x14}, /* XRX200_RS_CBS Rate Shaper CommittedBurst Size Register */
++// {0x0504, 0, 10, 0x14}, /* XRX200_RS_CBS_CBS Committed Burst Size */
++// {0x0508, 0, 16, 0x14}, /* XRX200_RS_IBS Rate Shaper InstantaneousBurst Size Register */
++// {0x0508, 0, 2, 0x14}, /* XRX200_RS_IBS_IBS Instantaneous Burst Size */
++// {0x050C, 0, 16, 0x14}, /* XRX200_RS_CIR_EXP Rate Shaper RateExponent Register */
++// {0x050C, 0, 4, 0x14}, /* XRX200_RS_CIR_EXP_EXP Exponent */
++// {0x0510, 0, 16, 0x14}, /* XRX200_RS_CIR_MANT Rate Shaper RateMantissa Register */
++// {0x0510, 0, 10, 0x14}, /* XRX200_RS_CIR_MANT_MANT Mantissa */
++ {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7 Table Key Data 7 */
++// {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7 Key Value[15:0] */
++ {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6 Table Key Data 6 */
++// {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6 Key Value[15:0] */
++ {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5 Table Key Data 5 */
++// {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5 Key Value[15:0] */
++ {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4 Table Key Data 4 */
++// {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4 Key Value[15:0] */
++ {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3 Table Key Data 3 */
++// {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3 Key Value[15:0] */
++ {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2 Table Key Data 2 */
++// {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2 Key Value[15:0] */
++ {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1 Table Key Data 1 */
++// {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1 Key Value[31:16] */
++ {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0 Table Key Data 0 */
++// {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0 Key Value[15:0] */
++ {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0 Table Mask Write Register0 */
++// {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0 Mask Pattern [15:0] */
++ {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4 Table Value Register4 */
++// {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4 Data value [15:0] */
++ {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3 Table Value Register3 */
++// {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3 Data value [15:0] */
++ {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2 Table Value Register2 */
++// {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2 Data value [15:0] */
++ {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1 Table Value Register1 */
++// {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1 Data value [15:0] */
++ {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0 Table Value Register0 */
++// {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0 Data value [15:0] */
++// {0x1138, 0, 16, 0x00}, /* XRX200_PCE_TBL_ADDR Table Entry AddressRegister */
++ {0x1138, 0, 11, 0x00}, /* XRX200_PCE_TBL_ADDR_ADDR Table Address */
++// {0x113C, 0, 16, 0x00}, /* XRX200_PCE_TBL_CTRL Table Access ControlRegister */
++ {0x113C, 15, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_BAS Access Busy/Access Start */
++ {0x113C, 13, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_TYPE Lookup Entry Type */
++ {0x113C, 12, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_VLD Lookup Entry Valid */
++ {0x113C, 7, 4, 0x00}, /* XRX200_PCE_TBL_CTRL_GMAP Group Map */
++ {0x113C, 5, 2, 0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD Lookup Table Access Operation Mode */
++ {0x113C, 0, 5, 0x00}, /* XRX200_PCE_TBL_CTRL_ADDR Lookup Table Address */
++// {0x1140, 0, 16, 0x00}, /* XRX200_PCE_TBL_STAT Table General StatusRegister */
++// {0x1140, 2, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TBUSY Table Access Busy */
++// {0x1140, 1, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TEMPT Table Empty */
++// {0x1140, 0, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TFUL Table Full */
++// {0x1144, 0, 16, 0x00}, /* XRX200_PCE_AGE_0 Aging Counter ConfigurationRegister 0 */
++// {0x1144, 0, 4, 0x00}, /* XRX200_PCE_AGE_0_EXP Aging Counter Exponent Value */
++// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1 Aging Counter ConfigurationRegister 1 */
++// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1_MANT Aging Counter Mantissa Value */
++// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1 Port Map Register 1 */
++// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1_MPMAP Monitoring Port Map */
++// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2 Port Map Register 2 */
++// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP Default Multicast Port Map */
++// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3 Port Map Register 3 */
++// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3_UUCMAP Default Unknown Unicast Port Map */
++// {0x1158, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_0 PCE Global Control Register0 */
++// {0x1158, 15, 1, 0x00}, /* XRX200_PCE_GCTRL_0_IGMP IGMP Mode Selection */
++ {0x1158, 14, 1, 0x00}, /* XRX200_PCE_GCTRL_0_VLAN VLAN-aware Switching */
++// {0x1158, 13, 1, 0x00}, /* XRX200_PCE_GCTRL_0_NOPM No Port Map Forwarding */
++// {0x1158, 12, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONUC Unknown Unicast Storm Control */
++// {0x1158, 11, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMC Multicast Storm Control */
++// {0x1158, 10, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONBC Broadcast Storm Control */
++// {0x1158, 8, 2, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD Storm Control Mode */
++// {0x1158, 4, 4, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMET Storm Control Metering Instance */
++// {0x1158, 3, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID Access Request */
++// {0x1158, 2, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD Port Lock Mode */
++// {0x1158, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD MAC Address Learning Limitation Mode */
++// {0x1158, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MTFL MAC Table Flushing */
++// {0x115C, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_1 PCE Global Control Register1 */
++// {0x115C, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS PCE Disable after currently processed packet */
++// {0x115C, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD MAC Address Learning Mode */
++// {0x1160, 0, 16, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL Three-color MarkerGlobal Control Register */
++// {0x1160, 6, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */
++// {0x1160, 3, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */
++// {0x1160, 0, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */
++// {0x1164, 0, 16, 0x00}, /* XRX200_PCE_IGMP_CTRL IGMP Control Register */
++// {0x1164, 15, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN Force Aging of Table Entries Enable */
++// {0x1164, 14, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE Fast Leave Enable */
++// {0x1164, 13, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN Default Maximum Response Time Enable */
++// {0x1164, 12, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP Join Aggregation Suppression Enable */
++// {0x1164, 11, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP Report Suppression Enable */
++// {0x1164, 10, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN Snooping of Router Port Enable */
++// {0x1164, 8, 2, 0x00}, /* XRX200_PCE_IGMP_CTRL_ROB Robustness Variable */
++// {0x1164, 0, 8, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT IGMP Default Maximum Response Time */
++// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM IGMP Default RouterPort Map Register */
++// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM IGMP Default Router Port Map */
++// {0x116C, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_0 IGMP Aging Register0 */
++// {0x116C, 3, 8, 0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT IGMP Group Aging Time Mantissa */
++// {0x116C, 0, 3, 0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP IGMP Group Aging Time Exponent */
++// {0x1170, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_1 IGMP Aging Register1 */
++// {0x1170, 0, 12, 0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT IGMP Router Port Aging Time Mantissa */
++// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT IGMP Status Register */
++// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT_IGPM IGMP Port Map */
++// {0x1178, 0, 16, 0x00}, /* XRX200_WOL_GLB_CTRL Wake-on-LAN ControlRegister */
++// {0x1178, 0, 1, 0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN WoL Password Enable */
++// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0 Wake-on-LAN DestinationAddress Register 0 */
++// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0_DA0 WoL Destination Address [15:0] */
++// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1 Wake-on-LAN DestinationAddress Register 1 */
++// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1_DA1 WoL Destination Address [31:16] */
++// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2 Wake-on-LAN DestinationAddress Register 2 */
++// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2_DA2 WoL Destination Address [47:32] */
++// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0 Wake-on-LAN Password Register0 */
++// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0_PW0 WoL Password [15:0] */
++// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1 Wake-on-LAN Password Register1 */
++// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1_PW1 WoL Password [31:16] */
++// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2 Wake-on-LAN Password Register2 */
++// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2_PW2 WoL Password [47:32] */
++// {0x1194, 0, 16, 0x00}, /* XRX200_PCE_IER_0_PINT Parser and ClassificationEngine Global Interrupt Enable Register 0 */
++// {0x1194, 15, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_15 Port Interrupt Enable */
++// {0x1194, 14, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_14 Port Interrupt Enable */
++// {0x1194, 13, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_13 Port Interrupt Enable */
++// {0x1194, 12, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_12 Port Interrupt Enable */
++// {0x1194, 11, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_11 Port Interrupt Enable */
++// {0x1194, 10, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_10 Port Interrupt Enable */
++// {0x1194, 9, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_9 Port Interrupt Enable */
++// {0x1194, 8, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_8 Port Interrupt Enable */
++// {0x1194, 7, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_7 Port Interrupt Enable */
++// {0x1194, 6, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_6 Port Interrupt Enable */
++// {0x1194, 5, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_5 Port Interrupt Enable */
++// {0x1194, 4, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_4 Port Interrupt Enable */
++// {0x1194, 3, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_3 Port Interrupt Enable */
++// {0x1194, 2, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_2 Port Interrupt Enable */
++// {0x1194, 1, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_1 Port Interrupt Enable */
++// {0x1194, 0, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_0 Port Interrupt Enable */
++// {0x1198, 0, 16, 0x00}, /* XRX200_PCE_IER_1 Parser and ClassificationEngine Global Interrupt Enable Register 1 */
++// {0x1198, 6, 1, 0x00}, /* XRX200_PCE_IER_1_FLOWINT Traffic Flow Table Interrupt Rule matched Interrupt Enable */
++// {0x1198, 5, 1, 0x00}, /* XRX200_PCE_IER_1_CPH2 Classification Phase 2 Ready Interrupt Enable */
++// {0x1198, 4, 1, 0x00}, /* XRX200_PCE_IER_1_CPH1 Classification Phase 1 Ready Interrupt Enable */
++// {0x1198, 3, 1, 0x00}, /* XRX200_PCE_IER_1_CPH0 Classification Phase 0 Ready Interrupt Enable */
++// {0x1198, 2, 1, 0x00}, /* XRX200_PCE_IER_1_PRDY Parser Ready Interrupt Enable */
++// {0x1198, 1, 1, 0x00}, /* XRX200_PCE_IER_1_IGTF IGMP Table Full Interrupt Enable */
++// {0x1198, 0, 1, 0x00}, /* XRX200_PCE_IER_1_MTF MAC Table Full Interrupt Enable */
++// {0x119C, 0, 16, 0x00}, /* XRX200_PCE_ISR_0_PINT Parser and ClassificationEngine Global Interrupt Status Register 0 */
++// {0x119C, 15, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_15 Port Interrupt */
++// {0x119C, 14, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_14 Port Interrupt */
++// {0x119C, 13, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_13 Port Interrupt */
++// {0x119C, 12, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_12 Port Interrupt */
++// {0x119C, 11, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_11 Port Interrupt */
++// {0x119C, 10, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_10 Port Interrupt */
++// {0x119C, 9, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_9 Port Interrupt */
++// {0x119C, 8, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_8 Port Interrupt */
++// {0x119C, 7, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_7 Port Interrupt */
++// {0x119C, 6, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_6 Port Interrupt */
++// {0x119C, 5, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_5 Port Interrupt */
++// {0x119C, 4, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_4 Port Interrupt */
++// {0x119C, 3, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_3 Port Interrupt */
++// {0x119C, 2, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_2 Port Interrupt */
++// {0x119C, 1, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_1 Port Interrupt */
++// {0x119C, 0, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_0 Port Interrupt */
++// {0x11A0, 0, 16, 0x00}, /* XRX200_PCE_ISR_1 Parser and ClassificationEngine Global Interrupt Status Register 1 */
++// {0x11A0, 6, 1, 0x00}, /* XRX200_PCE_ISR_1_FLOWINT Traffic Flow Table Interrupt Rule matched */
++// {0x11A0, 5, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH2 Classification Phase 2 Ready Interrupt */
++// {0x11A0, 4, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH1 Classification Phase 1 Ready Interrupt */
++// {0x11A0, 3, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH0 Classification Phase 0 Ready Interrupt */
++// {0x11A0, 2, 1, 0x00}, /* XRX200_PCE_ISR_1_PRDY Parser Ready Interrupt */
++// {0x11A0, 1, 1, 0x00}, /* XRX200_PCE_ISR_1_IGTF IGMP Table Full Interrupt */
++// {0x11A0, 0, 1, 0x00}, /* XRX200_PCE_ISR_1_MTF MAC Table Full Interrupt */
++// {0x11A4, 0, 16, 0x00}, /* XRX200_PARSER_STAT_FIFO Parser Status Register */
++// {0x11A4, 8, 8, 0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */
++// {0x11A4, 5, 3, 0x00}, /* XRX200_PARSER_STAT_FSM_STATE Parser FSM State */
++// {0x11A4, 4, 1, 0x00}, /* XRX200_PARSER_STAT_PKT_ERR Packet error detected */
++// {0x11A4, 3, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_FIN Parser FSM finished */
++// {0x11A4, 2, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_START Parser FSM start */
++// {0x11A4, 1, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_RDY Parser FIFO ready for read. */
++// {0x11A4, 0, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_FULL Parser */
++// {0x1200, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_0 PCE Port ControlRegister 0 */
++// {0x1200, 13, 1, 0x28}, /* XRX200_PCE_PCTRL_0_MCST Multicast Forwarding Mode Selection */
++// {0x1200, 12, 1, 0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN Table-based Egress Special Tag Enable */
++// {0x1200, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN Ingress Special Tag Enable */
++// {0x1200, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PCPEN PCP Remarking Mode */
++// {0x1200, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CLPEN Class Remarking Mode */
++// {0x1200, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_0_DPEN Drop Precedence Remarking Mode */
++// {0x1200, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CMOD Three-color Marker Color Mode */
++// {0x1200, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_0_VREP VLAN Replacement Mode */
++ {0x1200, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_0_TVM Transparent VLAN Mode */
++// {0x1200, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PLOCK Port Locking Enable */
++// {0x1200, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS Aging Disable */
++// {0x1200, 0, 3, 0x28}, /* XRX200_PCE_PCTRL_0_PSTATE Port State */
++// {0x1204, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_1 PCE Port ControlRegister 1 */
++// {0x1204, 0, 8, 0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM MAC Address Learning Limit */
++// {0x1208, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_2 PCE Port ControlRegister 2 */
++// {0x1208, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD DSCP Mode Selection */
++// {0x1208, 5, 2, 0x28}, /* XRX200_PCE_PCTRL_2_DSCP Enable DSCP to select the Class of Service */
++// {0x1208, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_2_PCP Enable VLAN PCP to select the Class of Service */
++// {0x1208, 0, 4, 0x28}, /* XRX200_PCE_PCTRL_2_PCLASS Port-based Traffic Class */
++// {0x120C, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_3_VIO PCE Port ControlRegister 3 */
++// {0x120C, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_3_EDIR Egress Redirection Mode */
++// {0x120C, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR Receive Mirroring Enable for dropped frames */
++// {0x120C, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR Receive Mirroring Enable for valid frames */
++// {0x120C, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_3_TXMIR Transmit Mirroring Enable */
++// {0x120C, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_7 Violation Type 7 Mirroring Enable */
++// {0x120C, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_6 Violation Type 6 Mirroring Enable */
++// {0x120C, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_5 Violation Type 5 Mirroring Enable */
++// {0x120C, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_4 Violation Type 4 Mirroring Enable */
++// {0x120C, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_3 Violation Type 3 Mirroring Enable */
++// {0x120C, 2, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_2 Violation Type 2 Mirroring Enable */
++// {0x120C, 1, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_1 Violation Type 1 Mirroring Enable */
++// {0x120C, 0, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_0 Violation Type 0 Mirroring Enable */
++// {0x1210, 0, 16, 0x28}, /* XRX200_WOL_CTRL Wake-on-LAN ControlRegister */
++// {0x1210, 0, 1, 0x28}, /* XRX200_WOL_CTRL_PORT WoL Enable */
++// {0x1214, 0, 16, 0x28}, /* XRX200_PCE_VCTRL PCE VLAN ControlRegister */
++ {0x1214, 5, 1, 0x28}, /* XRX200_PCE_VCTRL_VSR VLAN Security Rule */
++ {0x1214, 4, 1, 0x28}, /* XRX200_PCE_VCTRL_VEMR VLAN Egress Member Violation Rule */
++ {0x1214, 3, 1, 0x28}, /* XRX200_PCE_VCTRL_VIMR VLAN Ingress Member Violation Rule */
++ {0x1214, 1, 2, 0x28}, /* XRX200_PCE_VCTRL_VINR VLAN Ingress Tag Rule */
++ {0x1214, 0, 1, 0x28}, /* XRX200_PCE_VCTRL_UVR Unknown VLAN Rule */
++// {0x1218, 0, 16, 0x28}, /* XRX200_PCE_DEFPVID PCE Default PortVID Register */
++ {0x1218, 0, 6, 0x28}, /* XRX200_PCE_DEFPVID_PVID Default Port VID Index */
++// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT PCE Port StatusRegister */
++// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT_LRNCNT Learning Count */
++// {0x1220, 0, 16, 0x28}, /* XRX200_PCE_PIER Parser and ClassificationEngine Port Interrupt Enable Register */
++// {0x1220, 5, 1, 0x28}, /* XRX200_PCE_PIER_CLDRP Classification Drop Interrupt Enable */
++// {0x1220, 4, 1, 0x28}, /* XRX200_PCE_PIER_PTDRP Port Drop Interrupt Enable */
++// {0x1220, 3, 1, 0x28}, /* XRX200_PCE_PIER_VLAN VLAN Violation Interrupt Enable */
++// {0x1220, 2, 1, 0x28}, /* XRX200_PCE_PIER_WOL Wake-on-LAN Interrupt Enable */
++// {0x1220, 1, 1, 0x28}, /* XRX200_PCE_PIER_LOCK Port Limit Alert Interrupt Enable */
++// {0x1220, 0, 1, 0x28}, /* XRX200_PCE_PIER_LIM Port Lock Alert Interrupt Enable */
++// {0x1224, 0, 16, 0x28}, /* XRX200_PCE_PISR Parser and ClassificationEngine Port Interrupt Status Register */
++// {0x1224, 5, 1, 0x28}, /* XRX200_PCE_PISR_CLDRP Classification Drop Interrupt */
++// {0x1224, 4, 1, 0x28}, /* XRX200_PCE_PISR_PTDRP Port Drop Interrupt */
++// {0x1224, 3, 1, 0x28}, /* XRX200_PCE_PISR_VLAN VLAN Violation Interrupt */
++// {0x1224, 2, 1, 0x28}, /* XRX200_PCE_PISR_WOL Wake-on-LAN Interrupt */
++// {0x1224, 1, 1, 0x28}, /* XRX200_PCE_PISR_LOCK Port Lock Alert Interrupt */
++// {0x1224, 0, 1, 0x28}, /* XRX200_PCE_PISR_LIMIT Port Limitation Alert Interrupt */
++// {0x1600, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CTRL Three-colorMarker Control Register */
++// {0x1600, 0, 1, 0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN Three-color Marker metering instance enable */
++// {0x1604, 0, 16, 0x1c}, /* XRX200_PCE_TCM_STAT Three-colorMarker Status Register */
++// {0x1604, 1, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL1 Three-color Marker Alert 1 Status */
++// {0x1604, 0, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL0 Three-color Marker Alert 0 Status */
++// {0x1608, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CBS Three-color MarkerCommitted Burst Size Register */
++// {0x1608, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CBS_CBS Committed Burst Size */
++// {0x160C, 0, 16, 0x1c}, /* XRX200_PCE_TCM_EBS Three-color MarkerExcess Burst Size Register */
++// {0x160C, 0, 10, 0x1c}, /* XRX200_PCE_TCM_EBS_EBS Excess Burst Size */
++// {0x1610, 0, 16, 0x1c}, /* XRX200_PCE_TCM_IBS Three-color MarkerInstantaneous Burst Size Register */
++// {0x1610, 0, 2, 0x1c}, /* XRX200_PCE_TCM_IBS_IBS Instantaneous Burst Size */
++// {0x1614, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT Three-colorMarker Constant Information Rate Mantissa Register */
++// {0x1614, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT Rate Counter Mantissa */
++// {0x1618, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP Three-colorMarker Constant Information Rate Exponent Register */
++// {0x1618, 0, 4, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP Rate Counter Exponent */
++// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST MAC Test Register */
++// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST_JTP Jitter Test Pattern */
++// {0x2304, 0, 16, 0x00}, /* XRX200_MAC_PFAD_CFG MAC Pause FrameSource Address Configuration Register */
++// {0x2304, 0, 1, 0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD Source Address Mode */
++// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0 Pause Frame SourceAddress Part 0 */
++// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0_PFAD Pause Frame Source Address Part 0 */
++// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1 Pause Frame SourceAddress Part 1 */
++// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1_PFAD Pause Frame Source Address Part 1 */
++// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2 Pause Frame SourceAddress Part 2 */
++// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2_PFAD Pause Frame Source Address Part 2 */
++// {0x2314, 0, 16, 0x00}, /* XRX200_MAC_FLEN MAC Frame Length Register */
++// {0x2314, 0, 14, 0x00}, /* XRX200_MAC_FLEN_LEN Maximum Frame Length */
++// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0 MAC VLAN EthertypeRegister 0 */
++// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER Ethertype */
++// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1 MAC VLAN EthertypeRegister 1 */
++// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER Ethertype */
++// {0x2320, 0, 16, 0x00}, /* XRX200_MAC_IER MAC Interrupt EnableRegister */
++// {0x2320, 0, 8, 0x00}, /* XRX200_MAC_IER_MACIEN MAC Interrupt Enable */
++// {0x2324, 0, 16, 0x00}, /* XRX200_MAC_ISR MAC Interrupt StatusRegister */
++// {0x2324, 0, 8, 0x00}, /* XRX200_MAC_ISR_MACINT MAC Interrupt */
++// {0x2400, 0, 16, 0x30}, /* XRX200_MAC_PSTAT MAC Port Status Register */
++// {0x2400, 11, 1, 0x30}, /* XRX200_MAC_PSTAT_PACT PHY Active Status */
++ {0x2400, 10, 1, 0x30}, /* XRX200_MAC_PSTAT_GBIT Gigabit Speed Status */
++ {0x2400, 9, 1, 0x30}, /* XRX200_MAC_PSTAT_MBIT Megabit Speed Status */
++ {0x2400, 8, 1, 0x30}, /* XRX200_MAC_PSTAT_FDUP Full Duplex Status */
++// {0x2400, 7, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAU Receive Pause Status */
++// {0x2400, 6, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAU Transmit Pause Status */
++// {0x2400, 5, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAUEN Receive Pause Enable Status */
++// {0x2400, 4, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAUEN Transmit Pause Enable Status */
++ {0x2400, 3, 1, 0x30}, /* XRX200_MAC_PSTAT_LSTAT Link Status */
++// {0x2400, 2, 1, 0x30}, /* XRX200_MAC_PSTAT_CRS Carrier Sense Status */
++// {0x2400, 1, 1, 0x30}, /* XRX200_MAC_PSTAT_TXLPI Transmit Low-power Idle Status */
++// {0x2400, 0, 1, 0x30}, /* XRX200_MAC_PSTAT_RXLPI Receive Low-power Idle Status */
++// {0x2404, 0, 16, 0x30}, /* XRX200_MAC_PISR MAC Interrupt Status Register */
++// {0x2404, 13, 1, 0x30}, /* XRX200_MAC_PISR_PACT PHY Active Status */
++// {0x2404, 12, 1, 0x30}, /* XRX200_MAC_PISR_SPEED Megabit Speed Status */
++// {0x2404, 11, 1, 0x30}, /* XRX200_MAC_PISR_FDUP Full Duplex Status */
++// {0x2404, 10, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUEN Receive Pause Enable Status */
++// {0x2404, 9, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUEN Transmit Pause Enable Status */
++// {0x2404, 8, 1, 0x30}, /* XRX200_MAC_PISR_LPIOFF Receive Low-power Idle Mode is left */
++// {0x2404, 7, 1, 0x30}, /* XRX200_MAC_PISR_LPION Receive Low-power Idle Mode is entered */
++// {0x2404, 6, 1, 0x30}, /* XRX200_MAC_PISR_JAM Jam Status Detected */
++// {0x2404, 5, 1, 0x30}, /* XRX200_MAC_PISR_TOOSHORT Too Short Frame Error Detected */
++// {0x2404, 4, 1, 0x30}, /* XRX200_MAC_PISR_TOOLONG Too Long Frame Error Detected */
++// {0x2404, 3, 1, 0x30}, /* XRX200_MAC_PISR_LENERR Length Mismatch Error Detected */
++// {0x2404, 2, 1, 0x30}, /* XRX200_MAC_PISR_FCSERR Frame Checksum Error Detected */
++// {0x2404, 1, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUSE Pause Frame Transmitted */
++// {0x2404, 0, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUSE Pause Frame Received */
++// {0x2408, 0, 16, 0x30}, /* XRX200_MAC_PIER MAC Interrupt Enable Register */
++// {0x2408, 13, 1, 0x30}, /* XRX200_MAC_PIER_PACT PHY Active Status */
++// {0x2408, 12, 1, 0x30}, /* XRX200_MAC_PIER_SPEED Megabit Speed Status */
++// {0x2408, 11, 1, 0x30}, /* XRX200_MAC_PIER_FDUP Full Duplex Status */
++// {0x2408, 10, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUEN Receive Pause Enable Status */
++// {0x2408, 9, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUEN Transmit Pause Enable Status */
++// {0x2408, 8, 1, 0x30}, /* XRX200_MAC_PIER_LPIOFF Low-power Idle Off Interrupt Mask */
++// {0x2408, 7, 1, 0x30}, /* XRX200_MAC_PIER_LPION Low-power Idle On Interrupt Mask */
++// {0x2408, 6, 1, 0x30}, /* XRX200_MAC_PIER_JAM Jam Status Interrupt Mask */
++// {0x2408, 5, 1, 0x30}, /* XRX200_MAC_PIER_TOOSHORT Too Short Frame Error Interrupt Mask */
++// {0x2408, 4, 1, 0x30}, /* XRX200_MAC_PIER_TOOLONG Too Long Frame Error Interrupt Mask */
++// {0x2408, 3, 1, 0x30}, /* XRX200_MAC_PIER_LENERR Length Mismatch Error Interrupt Mask */
++// {0x2408, 2, 1, 0x30}, /* XRX200_MAC_PIER_FCSERR Frame Checksum Error Interrupt Mask */
++// {0x2408, 1, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUSE Transmit Pause Frame Interrupt Mask */
++// {0x2408, 0, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUSE Receive Pause Frame Interrupt Mask */
++// {0x240C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_0 MAC Control Register0 */
++// {0x240C, 13, 2, 0x30}, /* XRX200_MAC_CTRL_0_LCOL Late Collision Control */
++// {0x240C, 12, 1, 0x30}, /* XRX200_MAC_CTRL_0_BM Burst Mode Control */
++// {0x240C, 11, 1, 0x30}, /* XRX200_MAC_CTRL_0_APADEN Automatic VLAN Padding Enable */
++// {0x240C, 10, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN Stacked VLAN Padding Enable */
++// {0x240C, 9, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPADEN VLAN Padding Enable */
++// {0x240C, 8, 1, 0x30}, /* XRX200_MAC_CTRL_0_PADEN Padding Enable */
++// {0x240C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_0_FCS Transmit FCS Control */
++ {0x240C, 4, 3, 0x30}, /* XRX200_MAC_CTRL_0_FCON Flow Control Mode */
++// {0x240C, 2, 2, 0x30}, /* XRX200_MAC_CTRL_0_FDUP Full Duplex Control */
++// {0x240C, 0, 2, 0x30}, /* XRX200_MAC_CTRL_0_GMII GMII/MII interface mode selection */
++// {0x2410, 0, 16, 0x30}, /* XRX200_MAC_CTRL_1 MAC Control Register1 */
++// {0x2410, 8, 1, 0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE Short Preamble Control */
++// {0x2410, 0, 4, 0x30}, /* XRX200_MAC_CTRL_1_IPG Minimum Inter Packet Gap Size */
++// {0x2414, 0, 16, 0x30}, /* XRX200_MAC_CTRL_2 MAC Control Register2 */
++// {0x2414, 3, 1, 0x30}, /* XRX200_MAC_CTRL_2_MLEN Maximum Untagged Frame Length */
++// {0x2414, 2, 1, 0x30}, /* XRX200_MAC_CTRL_2_LCHKL Frame Length Check Long Enable */
++// {0x2414, 0, 2, 0x30}, /* XRX200_MAC_CTRL_2_LCHKS Frame Length Check Short Enable */
++// {0x2418, 0, 16, 0x30}, /* XRX200_MAC_CTRL_3 MAC Control Register3 */
++// {0x2418, 0, 4, 0x30}, /* XRX200_MAC_CTRL_3_RCNT Retry Count */
++// {0x241C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_4 MAC Control Register4 */
++// {0x241C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_4_LPIEN LPI Mode Enable */
++// {0x241C, 0, 7, 0x30}, /* XRX200_MAC_CTRL_4_WAIT LPI Wait Time */
++// {0x2420, 0, 16, 0x30}, /* XRX200_MAC_CTRL_5_PJPS MAC Control Register5 */
++// {0x2420, 1, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP Prolonged Jam pattern size during no-backpressure state */
++// {0x2420, 0, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP Prolonged Jam pattern size during backpressure state */
++// {0x2424, 0, 16, 0x30}, /* XRX200_MAC_CTRL_6_XBUF Transmit and ReceiveBuffer Control Register */
++// {0x2424, 9, 3, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP Delay */
++// {0x2424, 8, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT Receive Buffer Initialization */
++// {0x2424, 6, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS Bypass the Receive Buffer */
++// {0x2424, 3, 3, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP Delay */
++// {0x2424, 2, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT Initialize the Transmit Buffer */
++// {0x2424, 0, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS Bypass the Transmit Buffer */
++// {0x2428, 0, 16, 0x30}, /* XRX200_MAC_BUFST_XBUF MAC Receive and TransmitBuffer Status Register */
++// {0x2428, 3, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_UFL Receive Buffer Underflow Indicator */
++// {0x2428, 2, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_OFL Receive Buffer Overflow Indicator */
++// {0x2428, 1, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_UFL Transmit Buffer Underflow Indicator */
++// {0x2428, 0, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_OFL Transmit Buffer Overflow Indicator */
++// {0x242C, 0, 16, 0x30}, /* XRX200_MAC_TESTEN MAC Test Enable Register */
++// {0x242C, 2, 1, 0x30}, /* XRX200_MAC_TESTEN_JTEN Jitter Test Enable */
++// {0x242C, 1, 1, 0x30}, /* XRX200_MAC_TESTEN_TXER Transmit Error Insertion */
++// {0x242C, 0, 1, 0x30}, /* XRX200_MAC_TESTEN_LOOP MAC Loopback Enable */
++// {0x2900, 0, 16, 0x00}, /* XRX200_FDMA_CTRL Ethernet Switch FetchDMA Control Register */
++// {0x2900, 7, 5, 0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */
++// {0x2900, 4, 3, 0x00}, /* XRX200_FDMA_CTRL_LPI_MODE Low Power Idle Mode */
++// {0x2900, 2, 2, 0x00}, /* XRX200_FDMA_CTRL_EGSTAG Egress Special Tag Size */
++// {0x2900, 1, 1, 0x00}, /* XRX200_FDMA_CTRL_IGSTAG Ingress Special Tag Size */
++// {0x2900, 0, 1, 0x00}, /* XRX200_FDMA_CTRL_EXCOL Excessive Collision Handling */
++// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE Special Tag EthertypeControl Register */
++// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE_ETYPE Special Tag Ethertype */
++// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE VLAN Tag EthertypeControl Register */
++// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE_ETYPE VLAN Tag Ethertype */
++// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0 FDMA Status Register0 */
++// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0_FSMS FSM states status */
++// {0x2910, 0, 16, 0x00}, /* XRX200_FDMA_IER Fetch DMA Global InterruptEnable Register */
++// {0x2910, 14, 1, 0x00}, /* XRX200_FDMA_IER_PCKD Packet Drop Interrupt Enable */
++// {0x2910, 13, 1, 0x00}, /* XRX200_FDMA_IER_PCKR Packet Ready Interrupt Enable */
++// {0x2910, 0, 8, 0x00}, /* XRX200_FDMA_IER_PCKT Packet Sent Interrupt Enable */
++// {0x2914, 0, 16, 0x00}, /* XRX200_FDMA_ISR Fetch DMA Global InterruptStatus Register */
++// {0x2914, 14, 1, 0x00}, /* XRX200_FDMA_ISR_PCKTD Packet Drop */
++// {0x2914, 13, 1, 0x00}, /* XRX200_FDMA_ISR_PCKR Packet is Ready for Transmission */
++// {0x2914, 0, 8, 0x00}, /* XRX200_FDMA_ISR_PCKT Packet Sent Event */
++// {0x2A00, 0, 16, 0x18}, /* XRX200_FDMA_PCTRL Ethernet SwitchFetch DMA Port Control Register */
++// {0x2A00, 3, 2, 0x18}, /* XRX200_FDMA_PCTRL_VLANMOD VLAN Modification Enable */
++// {0x2A00, 2, 1, 0x18}, /* XRX200_FDMA_PCTRL_DSCPRM DSCP Re-marking Enable */
++// {0x2A00, 1, 1, 0x18}, /* XRX200_FDMA_PCTRL_STEN Special Tag Insertion Enable */
++// {0x2A00, 0, 1, 0x18}, /* XRX200_FDMA_PCTRL_EN FDMA Port Enable */
++// {0x2A04, 0, 16, 0x18}, /* XRX200_FDMA_PRIO Ethernet SwitchFetch DMA Port Priority Register */
++// {0x2A04, 0, 2, 0x18}, /* XRX200_FDMA_PRIO_PRIO FDMA PRIO */
++// {0x2A08, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT0 Ethernet SwitchFetch DMA Port Status Register 0 */
++// {0x2A08, 15, 1, 0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL Port Egress Packet Available */
++// {0x2A08, 14, 1, 0x18}, /* XRX200_FDMA_PSTAT0_POK Port Status OK */
++// {0x2A08, 0, 6, 0x18}, /* XRX200_FDMA_PSTAT0_PSEG Port Egress Segment Count */
++// {0x2A0C, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT1_HDR Ethernet SwitchFetch DMA Port Status Register 1 */
++// {0x2A0C, 0, 10, 0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR Header Pointer */
++// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0 Egress TimeStamp Register 0 */
++// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0_TSTL Time Stamp [15:0] */
++// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1 Egress TimeStamp Register 1 */
++// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1_TSTH Time Stamp [31:16] */
++// {0x2D00, 0, 16, 0x00}, /* XRX200_SDMA_CTRL Ethernet Switch StoreDMA Control Register */
++// {0x2D00, 0, 1, 0x00}, /* XRX200_SDMA_CTRL_TSTEN Time Stamp Enable */
++// {0x2D04, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR1 SDMA Flow Control Threshold1 Register */
++// {0x2D04, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR1_THR1 Threshold 1 */
++// {0x2D08, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR2 SDMA Flow Control Threshold2 Register */
++// {0x2D08, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR2_THR2 Threshold 2 */
++// {0x2D0C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR3 SDMA Flow Control Threshold3 Register */
++// {0x2D0C, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR3_THR3 Threshold 3 */
++// {0x2D10, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR4 SDMA Flow Control Threshold4 Register */
++// {0x2D10, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR4_THR4 Threshold 4 */
++// {0x2D14, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR5 SDMA Flow Control Threshold5 Register */
++// {0x2D14, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR5_THR5 Threshold 5 */
++// {0x2D18, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR6 SDMA Flow Control Threshold6 Register */
++// {0x2D18, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR6_THR6 Threshold 6 */
++// {0x2D1C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR7 SDMA Flow Control Threshold7 Register */
++// {0x2D1C, 0, 11, 0x00}, /* XRX200_SDMA_FCTHR7_THR7 Threshold 7 */
++// {0x2D20, 0, 16, 0x00}, /* XRX200_SDMA_STAT_0 SDMA Status Register0 */
++// {0x2D20, 4, 3, 0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL Back Pressure Status */
++// {0x2D20, 2, 2, 0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT Back Pressure Status */
++// {0x2D20, 0, 2, 0x00}, /* XRX200_SDMA_STAT_0_DROP Back Pressure Status */
++// {0x2D24, 0, 16, 0x00}, /* XRX200_SDMA_STAT_1 SDMA Status Register1 */
++// {0x2D24, 0, 10, 0x00}, /* XRX200_SDMA_STAT_1_FILL Buffer Filling Level */
++// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2 SDMA Status Register2 */
++// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2_FSMS FSM states status */
++// {0x2D2C, 0, 16, 0x00}, /* XRX200_SDMA_IER SDMA Interrupt Enable Register */
++// {0x2D2C, 15, 1, 0x00}, /* XRX200_SDMA_IER_BPEX Buffer Pointers Exceeded */
++// {0x2D2C, 14, 1, 0x00}, /* XRX200_SDMA_IER_BFULL Buffer Full */
++// {0x2D2C, 13, 1, 0x00}, /* XRX200_SDMA_IER_FERR Frame Error */
++// {0x2D2C, 0, 8, 0x00}, /* XRX200_SDMA_IER_FRX Frame Received Successfully */
++// {0x2D30, 0, 16, 0x00}, /* XRX200_SDMA_ISR SDMA Interrupt Status Register */
++// {0x2D30, 15, 1, 0x00}, /* XRX200_SDMA_ISR_BPEX Packet Descriptors Exceeded */
++// {0x2D30, 14, 1, 0x00}, /* XRX200_SDMA_ISR_BFULL Buffer Full */
++// {0x2D30, 13, 1, 0x00}, /* XRX200_SDMA_ISR_FERR Frame Error */
++// {0x2D30, 0, 8, 0x00}, /* XRX200_SDMA_ISR_FRX Frame Received Successfully */
++// {0x2F00, 0, 16, 0x18}, /* XRX200_SDMA_PCTRL Ethernet SwitchStore DMA Port Control Register */
++// {0x2F00, 13, 2, 0x18}, /* XRX200_SDMA_PCTRL_DTHR Drop Threshold Selection */
++// {0x2F00, 11, 2, 0x18}, /* XRX200_SDMA_PCTRL_PTHR Pause Threshold Selection */
++// {0x2F00, 10, 1, 0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD Forward PHY Error Frames */
++// {0x2F00, 9, 1, 0x18}, /* XRX200_SDMA_PCTRL_ALGFWD Forward Alignment Error Frames */
++// {0x2F00, 8, 1, 0x18}, /* XRX200_SDMA_PCTRL_LENFWD Forward Length Errored Frames */
++// {0x2F00, 7, 1, 0x18}, /* XRX200_SDMA_PCTRL_OSFWD Forward Oversized Frames */
++// {0x2F00, 6, 1, 0x18}, /* XRX200_SDMA_PCTRL_USFWD Forward Undersized Frames */
++// {0x2F00, 5, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSIGN Ignore FCS Errors */
++// {0x2F00, 4, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSFWD Forward FCS Errored Frames */
++// {0x2F00, 3, 1, 0x18}, /* XRX200_SDMA_PCTRL_PAUFWD Pause Frame Forwarding */
++// {0x2F00, 2, 1, 0x18}, /* XRX200_SDMA_PCTRL_MFCEN Metering Flow Control Enable */
++// {0x2F00, 1, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCEN Flow Control Enable */
++// {0x2F00, 0, 1, 0x18}, /* XRX200_SDMA_PCTRL_PEN Port Enable */
++// {0x2F04, 0, 16, 0x18}, /* XRX200_SDMA_PRIO Ethernet SwitchStore DMA Port Priority Register */
++// {0x2F04, 0, 2, 0x18}, /* XRX200_SDMA_PRIO_PRIO SDMA PRIO */
++// {0x2F08, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT0_HDR Ethernet SwitchStore DMA Port Status Register 0 */
++// {0x2F08, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR Port Ingress Queue Header Pointer */
++// {0x2F0C, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT1 Ethernet SwitchStore DMA Port Status Register 1 */
++// {0x2F0C, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT1_PPKT Port Ingress Packet Count */
++// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0 Ingress TimeStamp Register 0 */
++// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0_TSTL Time Stamp [15:0] */
++// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1 Ingress TimeStamp Register 1 */
++// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1_TSTH Time Stamp [31:16] */
++};
++
++
+--
+1.7.10.4
+
+++ /dev/null
-From 5b376c19a3608cf37908c58b47483909b8ec173a Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:26:42 +0200
-Subject: [PATCH 26/31] I2C: MIPS: lantiq: add FALC-ON i2c bus master
-
-This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/i2c/busses/Kconfig | 10 +
- drivers/i2c/busses/Makefile | 1 +
- drivers/i2c/busses/i2c-lantiq.c | 747 +++++++++++++++++++++++++++++++++++++++
- drivers/i2c/busses/i2c-lantiq.h | 234 ++++++++++++
- 4 files changed, 992 insertions(+)
- create mode 100644 drivers/i2c/busses/i2c-lantiq.c
- create mode 100644 drivers/i2c/busses/i2c-lantiq.h
-
-diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
-index de17c55..3e003c4 100644
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -514,6 +514,16 @@ config I2C_KEMPLD
- This driver can also be built as a module. If so, the module
- will be called i2c-kempld.
-
-+config I2C_LANTIQ
-+ tristate "Lantiq I2C interface"
-+ depends on LANTIQ && SOC_FALCON
-+ help
-+ If you say yes to this option, support will be included for the
-+ Lantiq I2C core.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called i2c-lantiq.
-+
- config I2C_MPC
- tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
- depends on PPC
-diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
-index a08931f..4417097 100644
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -49,6 +49,7 @@ obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
- obj-$(CONFIG_I2C_IMX) += i2c-imx.o
- obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
- obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
-+obj-$(CONFIG_I2C_LANTIQ) += i2c-lantiq.o
- obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
- obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
- obj-$(CONFIG_I2C_MXS) += i2c-mxs.o
-diff --git a/drivers/i2c/busses/i2c-lantiq.c b/drivers/i2c/busses/i2c-lantiq.c
-new file mode 100644
-index 0000000..9a5f58b
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-lantiq.c
-@@ -0,0 +1,747 @@
-+
-+/*
-+ * Lantiq I2C bus adapter
-+ *
-+ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h> /* for kzalloc, kfree */
-+#include <linux/i2c.h>
-+#include <linux/errno.h>
-+#include <linux/completion.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_i2c.h>
-+
-+#include <lantiq_soc.h>
-+#include "i2c-lantiq.h"
-+
-+/*
-+ * CURRENT ISSUES:
-+ * - no high speed support
-+ * - ten bit mode is not tested (no slave devices)
-+ */
-+
-+/* access macros */
-+#define i2c_r32(reg) \
-+ __raw_readl(&(priv->membase)->reg)
-+#define i2c_w32(val, reg) \
-+ __raw_writel(val, &(priv->membase)->reg)
-+#define i2c_w32_mask(clear, set, reg) \
-+ i2c_w32((i2c_r32(reg) & ~(clear)) | (set), reg)
-+
-+#define DRV_NAME "i2c-lantiq"
-+#define DRV_VERSION "1.00"
-+
-+#define LTQ_I2C_BUSY_TIMEOUT 20 /* ms */
-+
-+#ifdef DEBUG
-+#define LTQ_I2C_XFER_TIMEOUT (25*HZ)
-+#else
-+#define LTQ_I2C_XFER_TIMEOUT HZ
-+#endif
-+
-+#define LTQ_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \
-+ I2C_IMSC_I2C_ERR_INT_EN)
-+
-+#define LTQ_I2C_ARB_LOST (1 << 0)
-+#define LTQ_I2C_NACK (1 << 1)
-+#define LTQ_I2C_RX_UFL (1 << 2)
-+#define LTQ_I2C_RX_OFL (1 << 3)
-+#define LTQ_I2C_TX_UFL (1 << 4)
-+#define LTQ_I2C_TX_OFL (1 << 5)
-+
-+struct ltq_i2c {
-+ struct mutex mutex;
-+
-+
-+ /* active clock settings */
-+ unsigned int input_clock; /* clock input for i2c hardware block */
-+ unsigned int i2c_clock; /* approximated bus clock in kHz */
-+
-+ struct clk *clk_gate;
-+ struct clk *clk_input;
-+
-+
-+ /* resources (memory and interrupts) */
-+ int irq_lb; /* last burst irq */
-+
-+ struct lantiq_reg_i2c __iomem *membase; /* base of mapped registers */
-+
-+ struct i2c_adapter adap;
-+ struct device *dev;
-+
-+ struct completion cmd_complete;
-+
-+
-+ /* message transfer data */
-+ struct i2c_msg *current_msg; /* current message */
-+ int msgs_num; /* number of messages to handle */
-+ u8 *msg_buf; /* current buffer */
-+ u32 msg_buf_len; /* remaining length of current buffer */
-+ int msg_err; /* error status of the current transfer */
-+
-+
-+ /* master status codes */
-+ enum {
-+ STATUS_IDLE,
-+ STATUS_ADDR, /* address phase */
-+ STATUS_WRITE,
-+ STATUS_READ,
-+ STATUS_READ_END,
-+ STATUS_STOP
-+ } status;
-+};
-+
-+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id);
-+
-+static inline void enable_burst_irq(struct ltq_i2c *priv)
-+{
-+ i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
-+}
-+static inline void disable_burst_irq(struct ltq_i2c *priv)
-+{
-+ i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
-+}
-+
-+static void prepare_msg_send_addr(struct ltq_i2c *priv)
-+{
-+ struct i2c_msg *msg = priv->current_msg;
-+ int rd = !!(msg->flags & I2C_M_RD); /* extends to 0 or 1 */
-+ u16 addr = msg->addr;
-+
-+ /* new i2c_msg */
-+ priv->msg_buf = msg->buf;
-+ priv->msg_buf_len = msg->len;
-+ if (rd)
-+ priv->status = STATUS_READ;
-+ else
-+ priv->status = STATUS_WRITE;
-+
-+ /* send slave address */
-+ if (msg->flags & I2C_M_TEN) {
-+ i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd);
-+ i2c_w32(addr & 0xff, txd);
-+ } else {
-+ i2c_w32((addr & 0x7f) << 1 | rd, txd);
-+ }
-+}
-+
-+static void ltq_i2c_set_tx_len(struct ltq_i2c *priv)
-+{
-+ struct i2c_msg *msg = priv->current_msg;
-+ int len = (msg->flags & I2C_M_TEN) ? 2 : 1;
-+
-+ pr_debug("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? 'R' : 'T');
-+
-+ priv->status = STATUS_ADDR;
-+
-+ if (!(msg->flags & I2C_M_RD))
-+ len += msg->len;
-+ else
-+ /* set maximum received packet size (before rx int!) */
-+ i2c_w32(msg->len, mrps_ctrl);
-+ i2c_w32(len, tps_ctrl);
-+ enable_burst_irq(priv);
-+}
-+
-+static int ltq_i2c_hw_set_clock(struct i2c_adapter *adap)
-+{
-+ struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+ unsigned int input_clock = clk_get_rate(priv->clk_input);
-+ u32 dec, inc = 1;
-+
-+ /* clock changed? */
-+ if (priv->input_clock == input_clock)
-+ return 0;
-+
-+ /*
-+ * this formula is only an approximation, found by the recommended
-+ * values in the "I2C Architecture Specification 1.7.1"
-+ */
-+ dec = input_clock / (priv->i2c_clock * 2);
-+ if (dec <= 6)
-+ return -ENXIO;
-+
-+ i2c_w32(0, fdiv_high_cfg);
-+ i2c_w32((inc << I2C_FDIV_CFG_INC_OFFSET) |
-+ (dec << I2C_FDIV_CFG_DEC_OFFSET),
-+ fdiv_cfg);
-+
-+ dev_info(priv->dev, "setup clocks (in %d kHz, bus %d kHz, dec=%d)\n",
-+ input_clock, priv->i2c_clock, dec);
-+
-+ priv->input_clock = input_clock;
-+ return 0;
-+}
-+
-+static int ltq_i2c_hw_init(struct i2c_adapter *adap)
-+{
-+ int ret = 0;
-+ struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+
-+ /* disable bus */
-+ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
-+
-+#ifndef DEBUG
-+ /* set normal operation clock divider */
-+ i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
-+#else
-+ /* for debugging a higher divider value! */
-+ i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc);
-+#endif
-+
-+ /* setup clock */
-+ ret = ltq_i2c_hw_set_clock(adap);
-+ if (ret != 0) {
-+ dev_warn(priv->dev, "invalid clock settings\n");
-+ return ret;
-+ }
-+
-+ /* configure fifo */
-+ i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */
-+ I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */
-+ I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */
-+ I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */
-+ I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */
-+ I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */
-+ fifo_cfg);
-+
-+ /* configure address */
-+ i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data in
-+ the fifo */
-+ I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */
-+ I2C_ADDR_CFG_MnS_EN | /* we are master device */
-+ 0, /* our slave address (not used!) */
-+ addr_cfg);
-+
-+ /* enable bus */
-+ i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
-+
-+ return 0;
-+}
-+
-+static int ltq_i2c_wait_bus_not_busy(struct ltq_i2c *priv)
-+{
-+ unsigned long timeout;
-+
-+ timeout = jiffies + msecs_to_jiffies(LTQ_I2C_BUSY_TIMEOUT);
-+
-+ do {
-+ u32 stat = i2c_r32(bus_stat);
-+
-+ if ((stat & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_FREE)
-+ return 0;
-+
-+ cond_resched();
-+ } while (!time_after_eq(jiffies, timeout));
-+
-+ dev_err(priv->dev, "timeout waiting for bus ready\n");
-+ return -ETIMEDOUT;
-+}
-+
-+static void ltq_i2c_tx(struct ltq_i2c *priv, int last)
-+{
-+ if (priv->msg_buf_len && priv->msg_buf) {
-+ i2c_w32(*priv->msg_buf, txd);
-+
-+ if (--priv->msg_buf_len)
-+ priv->msg_buf++;
-+ else
-+ priv->msg_buf = NULL;
-+ } else {
-+ last = 1;
-+ }
-+
-+ if (last)
-+ disable_burst_irq(priv);
-+}
-+
-+static void ltq_i2c_rx(struct ltq_i2c *priv, int last)
-+{
-+ u32 fifo_stat, timeout;
-+ if (priv->msg_buf_len && priv->msg_buf) {
-+ timeout = 5000000;
-+ do {
-+ fifo_stat = i2c_r32(ffs_stat);
-+ } while (!fifo_stat && --timeout);
-+ if (!timeout) {
-+ last = 1;
-+ pr_debug("\nrx timeout\n");
-+ goto err;
-+ }
-+ while (fifo_stat) {
-+ *priv->msg_buf = i2c_r32(rxd);
-+ if (--priv->msg_buf_len) {
-+ priv->msg_buf++;
-+ } else {
-+ priv->msg_buf = NULL;
-+ last = 1;
-+ break;
-+ }
-+ /*
-+ * do not read more than burst size, otherwise no "last
-+ * burst" is generated and the transaction is blocked!
-+ */
-+ fifo_stat = 0;
-+ }
-+ } else {
-+ last = 1;
-+ }
-+err:
-+ if (last) {
-+ disable_burst_irq(priv);
-+
-+ if (priv->status == STATUS_READ_END) {
-+ /*
-+ * do the STATUS_STOP and complete() here, as sometimes
-+ * the tx_end is already seen before this is finished
-+ */
-+ priv->status = STATUS_STOP;
-+ complete(&priv->cmd_complete);
-+ } else {
-+ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
-+ priv->status = STATUS_READ_END;
-+ }
-+ }
-+}
-+
-+static void ltq_i2c_xfer_init(struct ltq_i2c *priv)
-+{
-+ /* enable interrupts */
-+ i2c_w32(LTQ_I2C_IMSC_DEFAULT_MASK, imsc);
-+
-+ /* trigger transfer of first msg */
-+ ltq_i2c_set_tx_len(priv);
-+}
-+
-+static void dump_msgs(struct i2c_msg msgs[], int num, int rx)
-+{
-+#if defined(DEBUG)
-+ int i, j;
-+ pr_debug("Messages %d %s\n", num, rx ? "out" : "in");
-+ for (i = 0; i < num; i++) {
-+ pr_debug("%2d %cX Msg(%d) addr=0x%X: ", i,
-+ (msgs[i].flags & I2C_M_RD) ? 'R' : 'T',
-+ msgs[i].len, msgs[i].addr);
-+ if (!(msgs[i].flags & I2C_M_RD) || rx) {
-+ for (j = 0; j < msgs[i].len; j++)
-+ pr_debug("%02X ", msgs[i].buf[j]);
-+ }
-+ pr_debug("\n");
-+ }
-+#endif
-+}
-+
-+static void ltq_i2c_release_bus(struct ltq_i2c *priv)
-+{
-+ if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM)
-+ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
-+}
-+
-+static int ltq_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
-+ int num)
-+{
-+ struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+ int ret;
-+
-+ dev_dbg(priv->dev, "xfer %u messages\n", num);
-+ dump_msgs(msgs, num, 0);
-+
-+ mutex_lock(&priv->mutex);
-+
-+ INIT_COMPLETION(priv->cmd_complete);
-+ priv->current_msg = msgs;
-+ priv->msgs_num = num;
-+ priv->msg_err = 0;
-+ priv->status = STATUS_IDLE;
-+
-+ /* wait for the bus to become ready */
-+ ret = ltq_i2c_wait_bus_not_busy(priv);
-+ if (ret)
-+ goto done;
-+
-+ while (priv->msgs_num) {
-+ /* start the transfers */
-+ ltq_i2c_xfer_init(priv);
-+
-+ /* wait for transfers to complete */
-+ ret = wait_for_completion_interruptible_timeout(
-+ &priv->cmd_complete, LTQ_I2C_XFER_TIMEOUT);
-+ if (ret == 0) {
-+ dev_err(priv->dev, "controller timed out\n");
-+ ltq_i2c_hw_init(adap);
-+ ret = -ETIMEDOUT;
-+ goto done;
-+ } else if (ret < 0)
-+ goto done;
-+
-+ if (priv->msg_err) {
-+ if (priv->msg_err & LTQ_I2C_NACK)
-+ ret = -ENXIO;
-+ else
-+ ret = -EREMOTEIO;
-+ goto done;
-+ }
-+ if (--priv->msgs_num)
-+ priv->current_msg++;
-+ }
-+ /* no error? */
-+ ret = num;
-+
-+done:
-+ ltq_i2c_release_bus(priv);
-+
-+ mutex_unlock(&priv->mutex);
-+
-+ if (ret >= 0)
-+ dump_msgs(msgs, num, 1);
-+
-+ pr_debug("XFER ret %d\n", ret);
-+ return ret;
-+}
-+
-+static irqreturn_t ltq_i2c_isr_burst(int irq, void *dev_id)
-+{
-+ struct ltq_i2c *priv = dev_id;
-+ struct i2c_msg *msg = priv->current_msg;
-+ int last = (irq == priv->irq_lb);
-+
-+ if (last)
-+ pr_debug("LB ");
-+ else
-+ pr_debug("B ");
-+
-+ if (msg->flags & I2C_M_RD) {
-+ switch (priv->status) {
-+ case STATUS_ADDR:
-+ pr_debug("X");
-+ prepare_msg_send_addr(priv);
-+ disable_burst_irq(priv);
-+ break;
-+ case STATUS_READ:
-+ case STATUS_READ_END:
-+ pr_debug("R");
-+ ltq_i2c_rx(priv, last);
-+ break;
-+ default:
-+ disable_burst_irq(priv);
-+ pr_warn("Status R %d\n", priv->status);
-+ break;
-+ }
-+ } else {
-+ switch (priv->status) {
-+ case STATUS_ADDR:
-+ pr_debug("x");
-+ prepare_msg_send_addr(priv);
-+ break;
-+ case STATUS_WRITE:
-+ pr_debug("w");
-+ ltq_i2c_tx(priv, last);
-+ break;
-+ default:
-+ disable_burst_irq(priv);
-+ pr_warn("Status W %d\n", priv->status);
-+ break;
-+ }
-+ }
-+
-+ i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr);
-+ return IRQ_HANDLED;
-+}
-+
-+static void ltq_i2c_isr_prot(struct ltq_i2c *priv)
-+{
-+ u32 i_pro = i2c_r32(p_irqss);
-+
-+ pr_debug("i2c-p");
-+
-+ /* not acknowledge */
-+ if (i_pro & I2C_P_IRQSS_NACK) {
-+ priv->msg_err |= LTQ_I2C_NACK;
-+ pr_debug(" nack");
-+ }
-+
-+ /* arbitration lost */
-+ if (i_pro & I2C_P_IRQSS_AL) {
-+ priv->msg_err |= LTQ_I2C_ARB_LOST;
-+ pr_debug(" arb-lost");
-+ }
-+ /* tx -> rx switch */
-+ if (i_pro & I2C_P_IRQSS_RX)
-+ pr_debug(" rx");
-+
-+ /* tx end */
-+ if (i_pro & I2C_P_IRQSS_TX_END)
-+ pr_debug(" txend");
-+ pr_debug("\n");
-+
-+ if (!priv->msg_err) {
-+ /* tx -> rx switch */
-+ if (i_pro & I2C_P_IRQSS_RX) {
-+ priv->status = STATUS_READ;
-+ enable_burst_irq(priv);
-+ }
-+ if (i_pro & I2C_P_IRQSS_TX_END) {
-+ if (priv->status == STATUS_READ)
-+ priv->status = STATUS_READ_END;
-+ else {
-+ disable_burst_irq(priv);
-+ priv->status = STATUS_STOP;
-+ }
-+ }
-+ }
-+
-+ i2c_w32(i_pro, p_irqsc);
-+}
-+
-+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id)
-+{
-+ u32 i_raw, i_err = 0;
-+ struct ltq_i2c *priv = dev_id;
-+
-+ i_raw = i2c_r32(mis);
-+ pr_debug("i_raw 0x%08X\n", i_raw);
-+
-+ /* error interrupt */
-+ if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
-+ i_err = i2c_r32(err_irqss);
-+ pr_debug("i_err 0x%08X bus_stat 0x%04X\n",
-+ i_err, i2c_r32(bus_stat));
-+
-+ /* tx fifo overflow (8) */
-+ if (i_err & I2C_ERR_IRQSS_TXF_OFL)
-+ priv->msg_err |= LTQ_I2C_TX_OFL;
-+
-+ /* tx fifo underflow (4) */
-+ if (i_err & I2C_ERR_IRQSS_TXF_UFL)
-+ priv->msg_err |= LTQ_I2C_TX_UFL;
-+
-+ /* rx fifo overflow (2) */
-+ if (i_err & I2C_ERR_IRQSS_RXF_OFL)
-+ priv->msg_err |= LTQ_I2C_RX_OFL;
-+
-+ /* rx fifo underflow (1) */
-+ if (i_err & I2C_ERR_IRQSS_RXF_UFL)
-+ priv->msg_err |= LTQ_I2C_RX_UFL;
-+
-+ i2c_w32(i_err, err_irqsc);
-+ }
-+
-+ /* protocol interrupt */
-+ if (i_raw & I2C_RIS_I2C_P_INT_INTOCC)
-+ ltq_i2c_isr_prot(priv);
-+
-+ if ((priv->msg_err) || (priv->status == STATUS_STOP))
-+ complete(&priv->cmd_complete);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static u32 ltq_i2c_functionality(struct i2c_adapter *adap)
-+{
-+ return I2C_FUNC_I2C |
-+ I2C_FUNC_10BIT_ADDR |
-+ I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static struct i2c_algorithm ltq_i2c_algorithm = {
-+ .master_xfer = ltq_i2c_xfer,
-+ .functionality = ltq_i2c_functionality,
-+};
-+
-+static int __devinit ltq_i2c_probe(struct platform_device *pdev)
-+{
-+ struct device_node *node = pdev->dev.of_node;
-+ struct ltq_i2c *priv;
-+ struct i2c_adapter *adap;
-+ struct resource *mmres, irqres[4];
-+ int ret = 0;
-+
-+ dev_dbg(&pdev->dev, "probing\n");
-+
-+ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ ret = of_irq_to_resource_table(node, irqres, 4);
-+ if (!mmres || (ret != 4)) {
-+ dev_err(&pdev->dev, "no resources\n");
-+ return -ENODEV;
-+ }
-+
-+ /* allocate private data */
-+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv) {
-+ dev_err(&pdev->dev, "can't allocate private data\n");
-+ return -ENOMEM;
-+ }
-+
-+ adap = &priv->adap;
-+ i2c_set_adapdata(adap, priv);
-+ adap->owner = THIS_MODULE;
-+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-+ strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
-+ adap->algo = <q_i2c_algorithm;
-+
-+ if (of_property_read_u32(node, "clock-frequency", &priv->i2c_clock)) {
-+ dev_warn(&pdev->dev, "No I2C speed selected, using 100kHz\n");
-+ priv->i2c_clock = 100000;
-+ }
-+
-+ init_completion(&priv->cmd_complete);
-+ mutex_init(&priv->mutex);
-+
-+ priv->membase = devm_request_and_ioremap(&pdev->dev, mmres);
-+ if (priv->membase == NULL)
-+ return -ENOMEM;
-+
-+ priv->dev = &pdev->dev;
-+ priv->irq_lb = irqres[0].start;
-+
-+ ret = devm_request_irq(&pdev->dev, irqres[0].start, ltq_i2c_isr_burst,
-+ IRQF_DISABLED, "i2c lb", priv);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't get last burst IRQ %d\n",
-+ irqres[0].start);
-+ return -ENODEV;
-+ }
-+
-+ ret = devm_request_irq(&pdev->dev, irqres[1].start, ltq_i2c_isr_burst,
-+ IRQF_DISABLED, "i2c b", priv);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't get burst IRQ %d\n",
-+ irqres[1].start);
-+ return -ENODEV;
-+ }
-+
-+ ret = devm_request_irq(&pdev->dev, irqres[2].start, ltq_i2c_isr,
-+ IRQF_DISABLED, "i2c err", priv);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't get error IRQ %d\n",
-+ irqres[2].start);
-+ return -ENODEV;
-+ }
-+
-+ ret = devm_request_irq(&pdev->dev, irqres[3].start, ltq_i2c_isr,
-+ IRQF_DISABLED, "i2c p", priv);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't get protocol IRQ %d\n",
-+ irqres[3].start);
-+ return -ENODEV;
-+ }
-+
-+ dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
-+ dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres[0].start,
-+ irqres[1].start, irqres[2].start, irqres[3].start);
-+
-+ priv->clk_gate = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(priv->clk_gate)) {
-+ dev_err(&pdev->dev, "failed to get i2c clk\n");
-+ return -ENOENT;
-+ }
-+
-+ /* this is a static clock, which has no refcounting */
-+ priv->clk_input = clk_get_fpi();
-+ if (IS_ERR(priv->clk_input)) {
-+ dev_err(&pdev->dev, "failed to get fpi clk\n");
-+ return -ENOENT;
-+ }
-+
-+ clk_activate(priv->clk_gate);
-+
-+ /* add our adapter to the i2c stack */
-+ ret = i2c_add_numbered_adapter(adap);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't register I2C adapter\n");
-+ goto out;
-+ }
-+
-+ platform_set_drvdata(pdev, priv);
-+ i2c_set_adapdata(adap, priv);
-+
-+ /* print module version information */
-+ dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
-+ (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
-+ (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
-+
-+ /* initialize HW */
-+ ret = ltq_i2c_hw_init(adap);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't configure adapter\n");
-+ i2c_del_adapter(adap);
-+ platform_set_drvdata(pdev, NULL);
-+ } else {
-+ dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
-+ }
-+
-+ of_i2c_register_devices(adap);
-+
-+out:
-+ /* if init failed, we need to deactivate the clock gate */
-+ if (ret)
-+ clk_deactivate(priv->clk_gate);
-+
-+ return ret;
-+}
-+
-+static int __devexit ltq_i2c_remove(struct platform_device *pdev)
-+{
-+ struct ltq_i2c *priv = platform_get_drvdata(pdev);
-+
-+ /* disable bus */
-+ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
-+
-+ /* power down the core */
-+ clk_deactivate(priv->clk_gate);
-+
-+ /* remove driver */
-+ i2c_del_adapter(&priv->adap);
-+ kfree(priv);
-+
-+ dev_dbg(&pdev->dev, "removed\n");
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+static const struct of_device_id ltq_i2c_match[] = {
-+ { .compatible = "lantiq,lantiq-i2c" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ltq_i2c_match);
-+
-+static struct platform_driver ltq_i2c_driver = {
-+ .probe = ltq_i2c_probe,
-+ .remove = __devexit_p(ltq_i2c_remove),
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = ltq_i2c_match,
-+ },
-+};
-+
-+module_platform_driver(ltq_i2c_driver);
-+
-+MODULE_DESCRIPTION("Lantiq I2C bus adapter");
-+MODULE_AUTHOR("Thomas Langer <thomas.langer@lantiq.com>");
-+MODULE_ALIAS("platform:" DRV_NAME);
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-diff --git a/drivers/i2c/busses/i2c-lantiq.h b/drivers/i2c/busses/i2c-lantiq.h
-new file mode 100644
-index 0000000..7a86b89
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-lantiq.h
-@@ -0,0 +1,234 @@
-+#ifndef I2C_LANTIQ_H
-+#define I2C_LANTIQ_H
-+
-+/* I2C register structure */
-+struct lantiq_reg_i2c {
-+ /* I2C Kernel Clock Control Register */
-+ unsigned int clc; /* 0x00000000 */
-+ /* Reserved */
-+ unsigned int res_0; /* 0x00000004 */
-+ /* I2C Identification Register */
-+ unsigned int id; /* 0x00000008 */
-+ /* Reserved */
-+ unsigned int res_1; /* 0x0000000C */
-+ /*
-+ * I2C RUN Control Register
-+ * This register enables and disables the I2C peripheral. Before
-+ * enabling, the I2C has to be configured properly. After enabling
-+ * no configuration is possible
-+ */
-+ unsigned int run_ctrl; /* 0x00000010 */
-+ /*
-+ * I2C End Data Control Register
-+ * This register is used to either turn around the data transmission
-+ * direction or to address another slave without sending a stop
-+ * condition. Also the software can stop the slave-transmitter by
-+ * sending a not-accolade when working as master-receiver or even
-+ * stop data transmission immediately when operating as
-+ * master-transmitter. The writing to the bits of this control
-+ * register is only effective when in MASTER RECEIVES BYTES, MASTER
-+ * TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state
-+ */
-+ unsigned int endd_ctrl; /* 0x00000014 */
-+ /*
-+ * I2C Fractional Divider Configuration Register
-+ * These register is used to program the fractional divider of the I2C
-+ * bus. Before the peripheral is switched on by setting the RUN-bit the
-+ * two (fixed) values for the two operating frequencies are programmed
-+ * into these (configuration) registers. The Register FDIV_HIGH_CFG has
-+ * the same layout as I2C_FDIV_CFG.
-+ */
-+ unsigned int fdiv_cfg; /* 0x00000018 */
-+ /*
-+ * I2C Fractional Divider (highspeed mode) Configuration Register
-+ * These register is used to program the fractional divider of the I2C
-+ * bus. Before the peripheral is switched on by setting the RUN-bit the
-+ * two (fixed) values for the two operating frequencies are programmed
-+ * into these (configuration) registers. The Register FDIV_CFG has the
-+ * same layout as I2C_FDIV_CFG.
-+ */
-+ unsigned int fdiv_high_cfg; /* 0x0000001C */
-+ /* I2C Address Configuration Register */
-+ unsigned int addr_cfg; /* 0x00000020 */
-+ /* I2C Bus Status Register
-+ * This register gives a status information of the I2C. This additional
-+ * information can be used by the software to start proper actions.
-+ */
-+ unsigned int bus_stat; /* 0x00000024 */
-+ /* I2C FIFO Configuration Register */
-+ unsigned int fifo_cfg; /* 0x00000028 */
-+ /* I2C Maximum Received Packet Size Register */
-+ unsigned int mrps_ctrl; /* 0x0000002C */
-+ /* I2C Received Packet Size Status Register */
-+ unsigned int rps_stat; /* 0x00000030 */
-+ /* I2C Transmit Packet Size Register */
-+ unsigned int tps_ctrl; /* 0x00000034 */
-+ /* I2C Filled FIFO Stages Status Register */
-+ unsigned int ffs_stat; /* 0x00000038 */
-+ /* Reserved */
-+ unsigned int res_2; /* 0x0000003C */
-+ /* I2C Timing Configuration Register */
-+ unsigned int tim_cfg; /* 0x00000040 */
-+ /* Reserved */
-+ unsigned int res_3[7]; /* 0x00000044 */
-+ /* I2C Error Interrupt Request Source Mask Register */
-+ unsigned int err_irqsm; /* 0x00000060 */
-+ /* I2C Error Interrupt Request Source Status Register */
-+ unsigned int err_irqss; /* 0x00000064 */
-+ /* I2C Error Interrupt Request Source Clear Register */
-+ unsigned int err_irqsc; /* 0x00000068 */
-+ /* Reserved */
-+ unsigned int res_4; /* 0x0000006C */
-+ /* I2C Protocol Interrupt Request Source Mask Register */
-+ unsigned int p_irqsm; /* 0x00000070 */
-+ /* I2C Protocol Interrupt Request Source Status Register */
-+ unsigned int p_irqss; /* 0x00000074 */
-+ /* I2C Protocol Interrupt Request Source Clear Register */
-+ unsigned int p_irqsc; /* 0x00000078 */
-+ /* Reserved */
-+ unsigned int res_5; /* 0x0000007C */
-+ /* I2C Raw Interrupt Status Register */
-+ unsigned int ris; /* 0x00000080 */
-+ /* I2C Interrupt Mask Control Register */
-+ unsigned int imsc; /* 0x00000084 */
-+ /* I2C Masked Interrupt Status Register */
-+ unsigned int mis; /* 0x00000088 */
-+ /* I2C Interrupt Clear Register */
-+ unsigned int icr; /* 0x0000008C */
-+ /* I2C Interrupt Set Register */
-+ unsigned int isr; /* 0x00000090 */
-+ /* I2C DMA Enable Register */
-+ unsigned int dmae; /* 0x00000094 */
-+ /* Reserved */
-+ unsigned int res_6[8154]; /* 0x00000098 */
-+ /* I2C Transmit Data Register */
-+ unsigned int txd; /* 0x00008000 */
-+ /* Reserved */
-+ unsigned int res_7[4095]; /* 0x00008004 */
-+ /* I2C Receive Data Register */
-+ unsigned int rxd; /* 0x0000C000 */
-+ /* Reserved */
-+ unsigned int res_8[4095]; /* 0x0000C004 */
-+};
-+
-+/*
-+ * Clock Divider for Normal Run Mode
-+ * Max 8-bit divider value. IF RMC is 0 the module is disabled. Note: As long
-+ * as the new divider value RMC is not valid, the register returns 0x0000 00xx
-+ * on reading.
-+ */
-+#define I2C_CLC_RMC_MASK 0x0000FF00
-+/* field offset */
-+#define I2C_CLC_RMC_OFFSET 8
-+
-+/* Fields of "I2C Identification Register" */
-+/* Module ID */
-+#define I2C_ID_ID_MASK 0x0000FF00
-+/* field offset */
-+#define I2C_ID_ID_OFFSET 8
-+/* Revision */
-+#define I2C_ID_REV_MASK 0x000000FF
-+/* field offset */
-+#define I2C_ID_REV_OFFSET 0
-+
-+/* Fields of "I2C Interrupt Mask Control Register" */
-+/* Enable */
-+#define I2C_IMSC_BREQ_INT_EN 0x00000008
-+/* Enable */
-+#define I2C_IMSC_LBREQ_INT_EN 0x00000004
-+
-+/* Fields of "I2C Fractional Divider Configuration Register" */
-+/* field offset */
-+#define I2C_FDIV_CFG_INC_OFFSET 16
-+
-+/* Fields of "I2C Interrupt Mask Control Register" */
-+/* Enable */
-+#define I2C_IMSC_I2C_P_INT_EN 0x00000020
-+/* Enable */
-+#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010
-+
-+/* Fields of "I2C Error Interrupt Request Source Status Register" */
-+/* TXF_OFL */
-+#define I2C_ERR_IRQSS_TXF_OFL 0x00000008
-+/* TXF_UFL */
-+#define I2C_ERR_IRQSS_TXF_UFL 0x00000004
-+/* RXF_OFL */
-+#define I2C_ERR_IRQSS_RXF_OFL 0x00000002
-+/* RXF_UFL */
-+#define I2C_ERR_IRQSS_RXF_UFL 0x00000001
-+
-+/* Fields of "I2C Raw Interrupt Status Register" */
-+/* Read: Interrupt occurred. */
-+#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010
-+/* Read: Interrupt occurred. */
-+#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020
-+
-+/* Fields of "I2C FIFO Configuration Register" */
-+/* TX FIFO Flow Control */
-+#define I2C_FIFO_CFG_TXFC 0x00020000
-+/* RX FIFO Flow Control */
-+#define I2C_FIFO_CFG_RXFC 0x00010000
-+/* Word aligned (character alignment of four characters) */
-+#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000
-+/* Word aligned (character alignment of four characters) */
-+#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200
-+/* 1 word */
-+#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000
-+
-+/* Fields of "I2C FIFO Configuration Register" */
-+/* 1 word */
-+#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000
-+/* Stop on Packet End Enable */
-+#define I2C_ADDR_CFG_SOPE_EN 0x00200000
-+/* Stop on Not Acknowledge Enable */
-+#define I2C_ADDR_CFG_SONA_EN 0x00100000
-+/* Enable */
-+#define I2C_ADDR_CFG_MnS_EN 0x00080000
-+
-+/* Fields of "I2C Interrupt Clear Register" */
-+/* Clear */
-+#define I2C_ICR_BREQ_INT_CLR 0x00000008
-+/* Clear */
-+#define I2C_ICR_LBREQ_INT_CLR 0x00000004
-+
-+/* Fields of "I2C Fractional Divider Configuration Register" */
-+/* field offset */
-+#define I2C_FDIV_CFG_DEC_OFFSET 0
-+
-+/* Fields of "I2C Bus Status Register" */
-+/* Bus Status */
-+#define I2C_BUS_STAT_BS_MASK 0x00000003
-+/* Read from I2C Bus. */
-+#define I2C_BUS_STAT_RNW_READ 0x00000004
-+/* I2C Bus is free. */
-+#define I2C_BUS_STAT_BS_FREE 0x00000000
-+/*
-+ * The device is working as master and has claimed the control on the
-+ * I2C-bus (busy master).
-+ */
-+#define I2C_BUS_STAT_BS_BM 0x00000002
-+
-+/* Fields of "I2C RUN Control Register" */
-+/* Enable */
-+#define I2C_RUN_CTRL_RUN_EN 0x00000001
-+
-+/* Fields of "I2C End Data Control Register" */
-+/*
-+ * Set End of Transmission
-+ * Note:Do not write '1' to this bit when bus is free. This will cause an
-+ * abort after the first byte when a new transfer is started.
-+ */
-+#define I2C_ENDD_CTRL_SETEND 0x00000002
-+
-+/* Fields of "I2C Protocol Interrupt Request Source Status Register" */
-+/* NACK */
-+#define I2C_P_IRQSS_NACK 0x00000010
-+/* AL */
-+#define I2C_P_IRQSS_AL 0x00000008
-+/* RX */
-+#define I2C_P_IRQSS_RX 0x00000040
-+/* TX_END */
-+#define I2C_P_IRQSS_TX_END 0x00000020
-+
-+
-+#endif /* I2C_LANTIQ_H */
---
-1.7.10.4
-
--- /dev/null
+From c6feeeb407a3b8a6597ae377ba4dd138e185e3dd Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:38:50 +0100
+Subject: [PATCH 26/36] NET: multi phy support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/phy/phy.c | 9 ++++++---
+ include/linux/phy.h | 1 +
+ 2 files changed, 7 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
+index 76d96b9..371f0b6 100644
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -715,7 +715,8 @@ void phy_state_machine(struct work_struct *work)
+ /* If the link is down, give up on negotiation for now */
+ if (!phydev->link) {
+ phydev->state = PHY_NOLINK;
+- netif_carrier_off(phydev->attached_dev);
++ if (!phydev->no_auto_carrier_off)
++ netif_carrier_off(phydev->attached_dev);
+ phydev->adjust_link(phydev->attached_dev);
+ break;
+ }
+@@ -781,7 +782,8 @@ void phy_state_machine(struct work_struct *work)
+ netif_carrier_on(phydev->attached_dev);
+ } else {
+ phydev->state = PHY_NOLINK;
+- netif_carrier_off(phydev->attached_dev);
++ if (!phydev->no_auto_carrier_off)
++ netif_carrier_off(phydev->attached_dev);
+ }
+
+ phydev->adjust_link(phydev->attached_dev);
+@@ -793,7 +795,8 @@ void phy_state_machine(struct work_struct *work)
+ case PHY_HALTED:
+ if (phydev->link) {
+ phydev->link = 0;
+- netif_carrier_off(phydev->attached_dev);
++ if (!phydev->no_auto_carrier_off)
++ netif_carrier_off(phydev->attached_dev);
+ phydev->adjust_link(phydev->attached_dev);
+ do_suspend = 1;
+ }
+diff --git a/include/linux/phy.h b/include/linux/phy.h
+index 565188c..91b93f7 100644
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -308,6 +308,7 @@ struct phy_device {
+ struct phy_c45_device_ids c45_ids;
+ bool is_c45;
+ bool is_internal;
++ bool no_auto_carrier_off;
+
+ enum phy_state state;
+
+--
+1.7.10.4
+
--- /dev/null
+From f393898476aef3e4f49c27725c3d2dd70fca38fe Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:40:01 +0100
+Subject: [PATCH 27/36] NET: add of_get_mac_address_mtd()
+
+Many embedded devices have information such as mac addresses stored inside mtd
+devices. This patch allows us to add a property inside a node describing a
+network interface. The new property points at a mtd partition with an offset
+where the mac address can be found.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/of/of_net.c | 37 +++++++++++++++++++++++++++++++++++++
+ include/linux/of_net.h | 1 +
+ 2 files changed, 38 insertions(+)
+
+diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
+index a208a45..de93111 100644
+--- a/drivers/of/of_net.c
++++ b/drivers/of/of_net.c
+@@ -10,6 +10,7 @@
+ #include <linux/of_net.h>
+ #include <linux/phy.h>
+ #include <linux/export.h>
++#include <linux/mtd/mtd.h>
+
+ /**
+ * It maps 'enum phy_interface_t' found in include/linux/phy.h
+@@ -94,3 +95,39 @@ const void *of_get_mac_address(struct device_node *np)
+ return NULL;
+ }
+ EXPORT_SYMBOL(of_get_mac_address);
++
++int of_get_mac_address_mtd(struct device_node *np, void *mac)
++{
++ struct device_node *mtd_np = NULL;
++ size_t retlen;
++ int size, ret;
++ struct mtd_info *mtd;
++ const char *part;
++ const __be32 *list;
++ phandle phandle;
++
++ list = of_get_property(np, "mtd-mac-address", &size);
++ if (!list || (size != (2 * sizeof(*list))))
++ return -ENOENT;
++
++ phandle = be32_to_cpup(list++);
++ if (phandle)
++ mtd_np = of_find_node_by_phandle(phandle);
++
++ if (!mtd_np)
++ return -ENOENT;
++
++ part = of_get_property(mtd_np, "label", NULL);
++ if (!part)
++ part = mtd_np->name;
++
++ mtd = get_mtd_device_nm(part);
++ if (IS_ERR(mtd))
++ return PTR_ERR(mtd);
++
++ ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, (u_char *) mac);
++ put_mtd_device(mtd);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(of_get_mac_address_mtd);
+diff --git a/include/linux/of_net.h b/include/linux/of_net.h
+index 34597c8..cdfbc60 100644
+--- a/include/linux/of_net.h
++++ b/include/linux/of_net.h
+@@ -11,6 +11,7 @@
+ #include <linux/of.h>
+ extern int of_get_phy_mode(struct device_node *np);
+ extern const void *of_get_mac_address(struct device_node *np);
++extern int of_get_mac_address_mtd(struct device_node *np, void *mac);
+ #else
+ static inline int of_get_phy_mode(struct device_node *np)
+ {
+--
+1.7.10.4
+
+++ /dev/null
-From 53c4acc1d3c7eae439b8bf3422de876e8a3e3bdb Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 6 Dec 2012 19:59:53 +0100
-Subject: [PATCH 27/31] USB: fix roothub for IFXHCD
-
----
- arch/mips/lantiq/Kconfig | 1 +
- drivers/usb/core/hub.c | 2 +-
- 2 files changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
-index 1621b1d..4c9a241 100644
---- a/arch/mips/lantiq/Kconfig
-+++ b/arch/mips/lantiq/Kconfig
-@@ -3,6 +3,7 @@ if LANTIQ
- config SOC_TYPE_XWAY
- bool
- select PINCTRL_XWAY
-+ select USB_ARCH_HAS_HCD
- default n
-
- choice
-diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
-index 64ea219..30f4bdf 100644
---- a/drivers/usb/core/hub.c
-+++ b/drivers/usb/core/hub.c
-@@ -4077,7 +4077,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
- udev->ttport = hdev->ttport;
- } else if (udev->speed != USB_SPEED_HIGH
- && hdev->speed == USB_SPEED_HIGH) {
-- if (!hub->tt.hub) {
-+ if (hdev->parent && !hub->tt.hub) {
- dev_err(&udev->dev, "parent hub has no TT\n");
- retval = -EINVAL;
- goto fail;
---
-1.7.10.4
-
--- /dev/null
+From 870ed9cae083ff8a60a739ef7e74c5a1800533be Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 9 Sep 2014 22:45:34 +0200
+Subject: [PATCH 28/36] NET: lantiq: various etop fixes
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/ethernet/lantiq_etop.c | 555 +++++++++++++++++++++++++-----------
+ 1 file changed, 389 insertions(+), 166 deletions(-)
+
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index fd4b6ae..1712382 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -11,7 +11,7 @@
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2011-12 John Crispin <blogic@openwrt.org>
+ */
+
+ #include <linux/kernel.h>
+@@ -30,11 +30,16 @@
+ #include <linux/mm.h>
+ #include <linux/platform_device.h>
+ #include <linux/ethtool.h>
++#include <linux/if_vlan.h>
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/io.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_irq.h>
++#include <linux/of_platform.h>
+
+ #include <asm/checksum.h>
+
+@@ -42,7 +47,7 @@
+ #include <xway_dma.h>
+ #include <lantiq_platform.h>
+
+-#define LTQ_ETOP_MDIO 0x11804
++#define LTQ_ETOP_MDIO_ACC 0x11804
+ #define MDIO_REQUEST 0x80000000
+ #define MDIO_READ 0x40000000
+ #define MDIO_ADDR_MASK 0x1f
+@@ -51,44 +56,91 @@
+ #define MDIO_REG_OFFSET 0x10
+ #define MDIO_VAL_MASK 0xffff
+
+-#define PPE32_CGEN 0x800
+-#define LQ_PPE32_ENET_MAC_CFG 0x1840
++#define LTQ_ETOP_MDIO_CFG 0x11800
++#define MDIO_CFG_MASK 0x6
++
++#define LTQ_ETOP_CFG 0x11808
++#define LTQ_ETOP_IGPLEN 0x11820
++#define LTQ_ETOP_MAC_CFG 0x11840
+
+ #define LTQ_ETOP_ENETS0 0x11850
+ #define LTQ_ETOP_MAC_DA0 0x1186C
+ #define LTQ_ETOP_MAC_DA1 0x11870
+-#define LTQ_ETOP_CFG 0x16020
+-#define LTQ_ETOP_IGPLEN 0x16080
++
++#define MAC_CFG_MASK 0xfff
++#define MAC_CFG_CGEN (1 << 11)
++#define MAC_CFG_DUPLEX (1 << 2)
++#define MAC_CFG_SPEED (1 << 1)
++#define MAC_CFG_LINK (1 << 0)
+
+ #define MAX_DMA_CHAN 0x8
+ #define MAX_DMA_CRC_LEN 0x4
+ #define MAX_DMA_DATA_LEN 0x600
+
+ #define ETOP_FTCU BIT(28)
+-#define ETOP_MII_MASK 0xf
+-#define ETOP_MII_NORMAL 0xd
+-#define ETOP_MII_REVERSE 0xe
+ #define ETOP_PLEN_UNDER 0x40
+-#define ETOP_CGEN 0x800
+-
+-/* use 2 static channels for TX/RX */
+-#define LTQ_ETOP_TX_CHANNEL 1
+-#define LTQ_ETOP_RX_CHANNEL 6
+-#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL)
+-#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL)
+-
++#define ETOP_CFG_MII0 0x01
++
++#define ETOP_CFG_MASK 0xfff
++#define ETOP_CFG_FEN0 (1 << 8)
++#define ETOP_CFG_SEN0 (1 << 6)
++#define ETOP_CFG_OFF1 (1 << 3)
++#define ETOP_CFG_REMII0 (1 << 1)
++#define ETOP_CFG_OFF0 (1 << 0)
++
++#define LTQ_GBIT_MDIO_CTL 0xCC
++#define LTQ_GBIT_MDIO_DATA 0xd0
++#define LTQ_GBIT_GCTL0 0x68
++#define LTQ_GBIT_PMAC_HD_CTL 0x8c
++#define LTQ_GBIT_P0_CTL 0x4
++#define LTQ_GBIT_PMAC_RX_IPG 0xa8
++#define LTQ_GBIT_RGMII_CTL 0x78
++
++#define PMAC_HD_CTL_AS (1 << 19)
++#define PMAC_HD_CTL_RXSH (1 << 22)
++
++/* Switch Enable (0=disable, 1=enable) */
++#define GCTL0_SE 0x80000000
++/* Disable MDIO auto polling (0=disable, 1=enable) */
++#define PX_CTL_DMDIO 0x00400000
++
++/* MDC clock divider, clock = 25MHz/((MDC_CLOCK + 1) * 2) */
++#define MDC_CLOCK_MASK 0xff000000
++#define MDC_CLOCK_OFFSET 24
++
++/* register information for the gbit's MDIO bus */
++#define MDIO_XR9_REQUEST 0x00008000
++#define MDIO_XR9_READ 0x00000800
++#define MDIO_XR9_WRITE 0x00000400
++#define MDIO_XR9_REG_MASK 0x1f
++#define MDIO_XR9_ADDR_MASK 0x1f
++#define MDIO_XR9_RD_MASK 0xffff
++#define MDIO_XR9_REG_OFFSET 0
++#define MDIO_XR9_ADDR_OFFSET 5
++#define MDIO_XR9_WR_OFFSET 16
++
++#define LTQ_DMA_ETOP ((of_machine_is_compatible("lantiq,ase")) ? \
++ (INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0))
++
++/* the newer xway socks have a embedded 3/7 port gbit multiplexer */
+ #define ltq_etop_r32(x) ltq_r32(ltq_etop_membase + (x))
+ #define ltq_etop_w32(x, y) ltq_w32(x, ltq_etop_membase + (y))
+ #define ltq_etop_w32_mask(x, y, z) \
+ ltq_w32_mask(x, y, ltq_etop_membase + (z))
+
+-#define DRV_VERSION "1.0"
++#define ltq_gbit_r32(x) ltq_r32(ltq_gbit_membase + (x))
++#define ltq_gbit_w32(x, y) ltq_w32(x, ltq_gbit_membase + (y))
++#define ltq_gbit_w32_mask(x, y, z) \
++ ltq_w32_mask(x, y, ltq_gbit_membase + (z))
++
++#define DRV_VERSION "1.2"
+
+ static void __iomem *ltq_etop_membase;
++static void __iomem *ltq_gbit_membase;
+
+ struct ltq_etop_chan {
+- int idx;
+ int tx_free;
++ int irq;
+ struct net_device *netdev;
+ struct napi_struct napi;
+ struct ltq_dma_channel dma;
+@@ -98,22 +150,35 @@ struct ltq_etop_chan {
+ struct ltq_etop_priv {
+ struct net_device *netdev;
+ struct platform_device *pdev;
+- struct ltq_eth_data *pldata;
+ struct resource *res;
+
+ struct mii_bus *mii_bus;
+ struct phy_device *phydev;
+
+- struct ltq_etop_chan ch[MAX_DMA_CHAN];
+- int tx_free[MAX_DMA_CHAN >> 1];
++ struct ltq_etop_chan txch;
++ struct ltq_etop_chan rxch;
++
++ int tx_irq;
++ int rx_irq;
++
++ const void *mac;
++ int mii_mode;
+
+ spinlock_t lock;
++
++ struct clk *clk_ppe;
++ struct clk *clk_switch;
++ struct clk *clk_ephy;
++ struct clk *clk_ephycgu;
+ };
+
++static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
++ int phy_reg, u16 phy_data);
++
+ static int
+ ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
+ {
+- ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN);
++ ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
+ if (!ch->skb[ch->dma.desc])
+ return -ENOMEM;
+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
+@@ -148,8 +213,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan *ch)
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ skb_put(skb, len);
++ skb->dev = ch->netdev;
+ skb->protocol = eth_type_trans(skb, ch->netdev);
+ netif_receive_skb(skb);
++ ch->netdev->stats.rx_packets++;
++ ch->netdev->stats.rx_bytes += len;
+ }
+
+ static int
+@@ -157,8 +225,10 @@ ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+ {
+ struct ltq_etop_chan *ch = container_of(napi,
+ struct ltq_etop_chan, napi);
++ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+ int rx = 0;
+ int complete = 0;
++ unsigned long flags;
+
+ while ((rx < budget) && !complete) {
+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+@@ -172,7 +242,9 @@ ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+ }
+ if (complete || !rx) {
+ napi_complete(&ch->napi);
++ spin_lock_irqsave(&priv->lock, flags);
+ ltq_dma_ack_irq(&ch->dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+ return rx;
+ }
+@@ -184,12 +256,14 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+ container_of(napi, struct ltq_etop_chan, napi);
+ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+ struct netdev_queue *txq =
+- netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
++ netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ while ((ch->dma.desc_base[ch->tx_free].ctl &
+ (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
++ ch->netdev->stats.tx_packets++;
++ ch->netdev->stats.tx_bytes += ch->skb[ch->tx_free]->len;
+ dev_kfree_skb_any(ch->skb[ch->tx_free]);
+ ch->skb[ch->tx_free] = NULL;
+ memset(&ch->dma.desc_base[ch->tx_free], 0,
+@@ -202,7 +276,9 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+ if (netif_tx_queue_stopped(txq))
+ netif_tx_start_queue(txq);
+ napi_complete(&ch->napi);
++ spin_lock_irqsave(&priv->lock, flags);
+ ltq_dma_ack_irq(&ch->dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
+ return 1;
+ }
+
+@@ -210,9 +286,10 @@ static irqreturn_t
+ ltq_etop_dma_irq(int irq, void *_priv)
+ {
+ struct ltq_etop_priv *priv = _priv;
+- int ch = irq - LTQ_DMA_CH0_INT;
+-
+- napi_schedule(&priv->ch[ch].napi);
++ if (irq == priv->txch.dma.irq)
++ napi_schedule(&priv->txch.napi);
++ else
++ napi_schedule(&priv->rxch.napi);
+ return IRQ_HANDLED;
+ }
+
+@@ -224,7 +301,7 @@ ltq_etop_free_channel(struct net_device *dev, struct ltq_etop_chan *ch)
+ ltq_dma_free(&ch->dma);
+ if (ch->dma.irq)
+ free_irq(ch->dma.irq, priv);
+- if (IS_RX(ch->idx)) {
++ if (ch == &priv->txch) {
+ int desc;
+ for (desc = 0; desc < LTQ_DESC_NUM; desc++)
+ dev_kfree_skb_any(ch->skb[ch->dma.desc]);
+@@ -235,65 +312,133 @@ static void
+ ltq_etop_hw_exit(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
+
+- ltq_pmu_disable(PMU_PPE);
+- for (i = 0; i < MAX_DMA_CHAN; i++)
+- if (IS_TX(i) || IS_RX(i))
+- ltq_etop_free_channel(dev, &priv->ch[i]);
++ clk_disable(priv->clk_ppe);
++
++ if (of_machine_is_compatible("lantiq,ar9"))
++ clk_disable(priv->clk_switch);
++
++ if (of_machine_is_compatible("lantiq,ase")) {
++ clk_disable(priv->clk_ephy);
++ clk_disable(priv->clk_ephycgu);
++ }
++
++ ltq_etop_free_channel(dev, &priv->txch);
++ ltq_etop_free_channel(dev, &priv->rxch);
++}
++
++static void
++ltq_etop_gbit_init(struct net_device *dev)
++{
++ struct ltq_etop_priv *priv = netdev_priv(dev);
++
++ clk_enable(priv->clk_switch);
++
++ /* enable gbit port0 on the SoC */
++ ltq_gbit_w32_mask((1 << 17), (1 << 18), LTQ_GBIT_P0_CTL);
++
++ ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
++ /* disable MDIO auto polling mode */
++ ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
++ /* set 1522 packet size */
++ ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0);
++ /* disable pmac & dmac headers */
++ ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0,
++ LTQ_GBIT_PMAC_HD_CTL);
++ /* Due to traffic halt when burst length 8,
++ replace default IPG value with 0x3B */
++ ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG);
++ /* set mdc clock to 2.5 MHz */
++ ltq_gbit_w32_mask(MDC_CLOCK_MASK, 4 << MDC_CLOCK_OFFSET,
++ LTQ_GBIT_RGMII_CTL);
+ }
+
+ static int
+ ltq_etop_hw_init(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
++ int mii_mode = priv->mii_mode;
++
++ clk_enable(priv->clk_ppe);
+
+- ltq_pmu_enable(PMU_PPE);
++ if (of_machine_is_compatible("lantiq,ar9")) {
++ ltq_etop_gbit_init(dev);
++ /* force the etops link to the gbit to MII */
++ mii_mode = PHY_INTERFACE_MODE_MII;
++ }
++ ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG);
++ ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX |
++ MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG);
+
+- switch (priv->pldata->mii_mode) {
++ switch (mii_mode) {
+ case PHY_INTERFACE_MODE_RMII:
+- ltq_etop_w32_mask(ETOP_MII_MASK,
+- ETOP_MII_REVERSE, LTQ_ETOP_CFG);
++ ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_REMII0 | ETOP_CFG_OFF1 |
++ ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG);
+ break;
+
+ case PHY_INTERFACE_MODE_MII:
+- ltq_etop_w32_mask(ETOP_MII_MASK,
+- ETOP_MII_NORMAL, LTQ_ETOP_CFG);
++ ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_OFF1 |
++ ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG);
+ break;
+
+ default:
++ if (of_machine_is_compatible("lantiq,ase")) {
++ clk_enable(priv->clk_ephy);
++ /* disable external MII */
++ ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
++ /* enable clock for internal PHY */
++ clk_enable(priv->clk_ephycgu);
++ /* we need to write this magic to the internal phy to
++ make it work */
++ ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
++ pr_info("Selected EPHY mode\n");
++ break;
++ }
+ netdev_err(dev, "unknown mii mode %d\n",
+- priv->pldata->mii_mode);
++ mii_mode);
+ return -ENOTSUPP;
+ }
+
+- /* enable crc generation */
+- ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
++ return 0;
++}
++
++static int
++ltq_etop_dma_init(struct net_device *dev)
++{
++ struct ltq_etop_priv *priv = netdev_priv(dev);
++ int tx = priv->tx_irq - LTQ_DMA_ETOP;
++ int rx = priv->rx_irq - LTQ_DMA_ETOP;
++ int err;
+
+ ltq_dma_init_port(DMA_PORT_ETOP);
+
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- int irq = LTQ_DMA_CH0_INT + i;
+- struct ltq_etop_chan *ch = &priv->ch[i];
+-
+- ch->idx = ch->dma.nr = i;
+-
+- if (IS_TX(i)) {
+- ltq_dma_alloc_tx(&ch->dma);
+- request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
+- } else if (IS_RX(i)) {
+- ltq_dma_alloc_rx(&ch->dma);
+- for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+- ch->dma.desc++)
+- if (ltq_etop_alloc_skb(ch))
+- return -ENOMEM;
+- ch->dma.desc = 0;
+- request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv);
++ priv->txch.dma.nr = tx;
++ ltq_dma_alloc_tx(&priv->txch.dma);
++ err = request_irq(priv->tx_irq, ltq_etop_dma_irq, 0, "eth_tx", priv);
++ if (err) {
++ netdev_err(dev, "failed to allocate tx irq\n");
++ goto err_out;
++ }
++ priv->txch.dma.irq = priv->tx_irq;
++
++ priv->rxch.dma.nr = rx;
++ ltq_dma_alloc_rx(&priv->rxch.dma);
++ for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM;
++ priv->rxch.dma.desc++) {
++ if (ltq_etop_alloc_skb(&priv->rxch)) {
++ netdev_err(dev, "failed to allocate skbs\n");
++ err = -ENOMEM;
++ goto err_out;
+ }
+- ch->dma.irq = irq;
+ }
+- return 0;
++ priv->rxch.dma.desc = 0;
++ err = request_irq(priv->rx_irq, ltq_etop_dma_irq, 0, "eth_rx", priv);
++ if (err)
++ netdev_err(dev, "failed to allocate rx irq\n");
++ else
++ priv->rxch.dma.irq = priv->rx_irq;
++err_out:
++ return err;
+ }
+
+ static void
+@@ -309,7 +454,10 @@ ltq_etop_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+- return phy_ethtool_gset(priv->phydev, cmd);
++ if (priv->phydev)
++ return phy_ethtool_gset(priv->phydev, cmd);
++ else
++ return 0;
+ }
+
+ static int
+@@ -317,7 +465,10 @@ ltq_etop_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+- return phy_ethtool_sset(priv->phydev, cmd);
++ if (priv->phydev)
++ return phy_ethtool_sset(priv->phydev, cmd);
++ else
++ return 0;
+ }
+
+ static int
+@@ -325,7 +476,10 @@ ltq_etop_nway_reset(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+- return phy_start_aneg(priv->phydev);
++ if (priv->phydev)
++ return phy_start_aneg(priv->phydev);
++ else
++ return 0;
+ }
+
+ static const struct ethtool_ops ltq_etop_ethtool_ops = {
+@@ -336,6 +490,39 @@ static const struct ethtool_ops ltq_etop_ethtool_ops = {
+ };
+
+ static int
++ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr,
++ int phy_reg, u16 phy_data)
++{
++ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE |
++ (phy_data << MDIO_XR9_WR_OFFSET) |
++ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
++ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
++
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ return 0;
++}
++
++static int
++ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ |
++ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
++ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
++
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK;
++ return val;
++}
++
++static int
+ ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
+ {
+ u32 val = MDIO_REQUEST |
+@@ -343,9 +530,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
+ ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
+ phy_data;
+
+- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
++ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
+ ;
+- ltq_etop_w32(val, LTQ_ETOP_MDIO);
++ ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC);
+ return 0;
+ }
+
+@@ -356,12 +543,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, int phy_addr, int phy_reg)
+ ((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
+ ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
+
+- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
++ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
+ ;
+- ltq_etop_w32(val, LTQ_ETOP_MDIO);
+- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
++ ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC);
++ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
+ ;
+- val = ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_VAL_MASK;
++ val = ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_VAL_MASK;
+ return val;
+ }
+
+@@ -376,14 +563,18 @@ ltq_etop_mdio_probe(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = NULL;
+- int phy_addr;
+-
+- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+- if (priv->mii_bus->phy_map[phy_addr]) {
+- phydev = priv->mii_bus->phy_map[phy_addr];
+- break;
+- }
+- }
++ u32 phy_supported = (SUPPORTED_10baseT_Half
++ | SUPPORTED_10baseT_Full
++ | SUPPORTED_100baseT_Half
++ | SUPPORTED_100baseT_Full
++ | SUPPORTED_Autoneg
++ | SUPPORTED_MII
++ | SUPPORTED_TP);
++
++ if (of_machine_is_compatible("lantiq,ase"))
++ phydev = priv->mii_bus->phy_map[8];
++ else
++ phydev = priv->mii_bus->phy_map[0];
+
+ if (!phydev) {
+ netdev_err(dev, "no PHY found\n");
+@@ -391,21 +582,18 @@ ltq_etop_mdio_probe(struct net_device *dev)
+ }
+
+ phydev = phy_connect(dev, dev_name(&phydev->dev),
+- <q_etop_mdio_link, priv->pldata->mii_mode);
++ <q_etop_mdio_link, priv->mii_mode);
+
+ if (IS_ERR(phydev)) {
+ netdev_err(dev, "Could not attach to PHY\n");
+ return PTR_ERR(phydev);
+ }
+
+- phydev->supported &= (SUPPORTED_10baseT_Half
+- | SUPPORTED_10baseT_Full
+- | SUPPORTED_100baseT_Half
+- | SUPPORTED_100baseT_Full
+- | SUPPORTED_Autoneg
+- | SUPPORTED_MII
+- | SUPPORTED_TP);
++ if (of_machine_is_compatible("lantiq,ar9"))
++ phy_supported |= SUPPORTED_1000baseT_Half
++ | SUPPORTED_1000baseT_Full;
+
++ phydev->supported &= phy_supported;
+ phydev->advertising = phydev->supported;
+ priv->phydev = phydev;
+ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
+@@ -430,8 +618,13 @@ ltq_etop_mdio_init(struct net_device *dev)
+ }
+
+ priv->mii_bus->priv = dev;
+- priv->mii_bus->read = ltq_etop_mdio_rd;
+- priv->mii_bus->write = ltq_etop_mdio_wr;
++ if (of_machine_is_compatible("lantiq,ar9")) {
++ priv->mii_bus->read = ltq_etop_mdio_rd_xr9;
++ priv->mii_bus->write = ltq_etop_mdio_wr_xr9;
++ } else {
++ priv->mii_bus->read = ltq_etop_mdio_rd;
++ priv->mii_bus->write = ltq_etop_mdio_wr;
++ }
+ priv->mii_bus->name = "ltq_mii";
+ snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
+ priv->pdev->name, priv->pdev->id);
+@@ -480,17 +673,19 @@ static int
+ ltq_etop_open(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
++ unsigned long flags;
+
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- struct ltq_etop_chan *ch = &priv->ch[i];
++ napi_enable(&priv->txch.napi);
++ napi_enable(&priv->rxch.napi);
++
++ spin_lock_irqsave(&priv->lock, flags);
++ ltq_dma_open(&priv->txch.dma);
++ ltq_dma_open(&priv->rxch.dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ if (priv->phydev)
++ phy_start(priv->phydev);
+
+- if (!IS_TX(i) && (!IS_RX(i)))
+- continue;
+- ltq_dma_open(&ch->dma);
+- napi_enable(&ch->napi);
+- }
+- phy_start(priv->phydev);
+ netif_tx_start_all_queues(dev);
+ return 0;
+ }
+@@ -499,18 +694,19 @@ static int
+ ltq_etop_stop(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
++ unsigned long flags;
+
+ netif_tx_stop_all_queues(dev);
+- phy_stop(priv->phydev);
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- struct ltq_etop_chan *ch = &priv->ch[i];
++ if (priv->phydev)
++ phy_stop(priv->phydev);
++ napi_disable(&priv->txch.napi);
++ napi_disable(&priv->rxch.napi);
++
++ spin_lock_irqsave(&priv->lock, flags);
++ ltq_dma_close(&priv->txch.dma);
++ ltq_dma_close(&priv->rxch.dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
+
+- if (!IS_RX(i) && !IS_TX(i))
+- continue;
+- napi_disable(&ch->napi);
+- ltq_dma_close(&ch->dma);
+- }
+ return 0;
+ }
+
+@@ -520,16 +716,16 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+ int queue = skb_get_queue_mapping(skb);
+ struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
+- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+- int len;
++ struct ltq_dma_desc *desc =
++ &priv->txch.dma.desc_base[priv->txch.dma.desc];
+ unsigned long flags;
+ u32 byte_offset;
++ int len;
+
+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+- if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
+- dev_kfree_skb_any(skb);
++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) ||
++ priv->txch.skb[priv->txch.dma.desc]) {
+ netdev_err(dev, "tx ring full\n");
+ netif_tx_stop_queue(txq);
+ return NETDEV_TX_BUSY;
+@@ -537,7 +733,7 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+
+ /* dma needs to start on a 16 byte aligned address */
+ byte_offset = CPHYSADDR(skb->data) % 16;
+- ch->skb[ch->dma.desc] = skb;
++ priv->txch.skb[priv->txch.dma.desc] = skb;
+
+ dev->trans_start = jiffies;
+
+@@ -547,11 +743,11 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+ wmb();
+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
+- ch->dma.desc++;
+- ch->dma.desc %= LTQ_DESC_NUM;
++ priv->txch.dma.desc++;
++ priv->txch.dma.desc %= LTQ_DESC_NUM;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+- if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
++ if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN)
+ netif_tx_stop_queue(txq);
+
+ return NETDEV_TX_OK;
+@@ -566,8 +762,10 @@ ltq_etop_change_mtu(struct net_device *dev, int new_mtu)
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ unsigned long flags;
+
++ int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
++
+ spin_lock_irqsave(&priv->lock, flags);
+- ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu,
++ ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max,
+ LTQ_ETOP_IGPLEN);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+@@ -631,34 +829,33 @@ ltq_etop_init(struct net_device *dev)
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ struct sockaddr mac;
+ int err;
+- bool random_mac = false;
+
+ ether_setup(dev);
+ dev->watchdog_timeo = 10 * HZ;
+ err = ltq_etop_hw_init(dev);
+ if (err)
+ goto err_hw;
++ err = ltq_etop_dma_init(dev);
++ if (err)
++ goto err_hw;
++
+ ltq_etop_change_mtu(dev, 1500);
+
+- memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
++ if (priv->mac)
++ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
+ if (!is_valid_ether_addr(mac.sa_data)) {
+ pr_warn("etop: invalid MAC, using random\n");
+- eth_random_addr(mac.sa_data);
+- random_mac = true;
++ random_ether_addr(mac.sa_data);
+ }
+
+ err = ltq_etop_set_mac_address(dev, &mac);
+ if (err)
+ goto err_netdev;
+-
+- /* Set addr_assign_type here, ltq_etop_set_mac_address would reset it. */
+- if (random_mac)
+- dev->addr_assign_type = NET_ADDR_RANDOM;
+-
+ ltq_etop_set_multicast_list(dev);
+- err = ltq_etop_mdio_init(dev);
+- if (err)
+- goto err_netdev;
++ if (!ltq_etop_mdio_init(dev))
++ dev->ethtool_ops = <q_etop_ethtool_ops;
++ else
++ pr_warn("etop: mdio probe failed\n");;
+ return 0;
+
+ err_netdev:
+@@ -678,6 +875,9 @@ ltq_etop_tx_timeout(struct net_device *dev)
+ err = ltq_etop_hw_init(dev);
+ if (err)
+ goto err_hw;
++ err = ltq_etop_dma_init(dev);
++ if (err)
++ goto err_hw;
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+ return;
+@@ -701,14 +901,18 @@ static const struct net_device_ops ltq_eth_netdev_ops = {
+ .ndo_tx_timeout = ltq_etop_tx_timeout,
+ };
+
+-static int __init
+-ltq_etop_probe(struct platform_device *pdev)
++static int ltq_etop_probe(struct platform_device *pdev)
+ {
+ struct net_device *dev;
+ struct ltq_etop_priv *priv;
+- struct resource *res;
++ struct resource *res, *gbit_res, irqres[2];
+ int err;
+- int i;
++
++ err = of_irq_to_resource_table(pdev->dev.of_node, irqres, 2);
++ if (err != 2) {
++ dev_err(&pdev->dev, "failed to get etop irqs\n");
++ return -EINVAL;
++ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+@@ -734,30 +938,58 @@ ltq_etop_probe(struct platform_device *pdev)
+ goto err_out;
+ }
+
+- dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+- if (!dev) {
+- err = -ENOMEM;
+- goto err_out;
++ if (of_machine_is_compatible("lantiq,ar9")) {
++ gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ if (!gbit_res) {
++ dev_err(&pdev->dev, "failed to get gbit resource\n");
++ err = -ENOENT;
++ goto err_out;
++ }
++ ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev,
++ gbit_res->start, resource_size(gbit_res));
++ if (!ltq_gbit_membase) {
++ dev_err(&pdev->dev, "failed to remap gigabit switch %d\n",
++ pdev->id);
++ err = -ENOMEM;
++ goto err_out;
++ }
+ }
++
++ dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+ strcpy(dev->name, "eth%d");
+ dev->netdev_ops = <q_eth_netdev_ops;
+- dev->ethtool_ops = <q_etop_ethtool_ops;
+ priv = netdev_priv(dev);
+ priv->res = res;
+ priv->pdev = pdev;
+- priv->pldata = dev_get_platdata(&pdev->dev);
+ priv->netdev = dev;
++ priv->tx_irq = irqres[0].start;
++ priv->rx_irq = irqres[1].start;
++ priv->mii_mode = of_get_phy_mode(pdev->dev.of_node);
++ of_get_mac_address_mtd(pdev->dev.of_node, priv->mac);
++
++ priv->clk_ppe = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(priv->clk_ppe))
++ return PTR_ERR(priv->clk_ppe);
++ if (of_machine_is_compatible("lantiq,ar9")) {
++ priv->clk_switch = clk_get(&pdev->dev, "switch");
++ if (IS_ERR(priv->clk_switch))
++ return PTR_ERR(priv->clk_switch);
++ }
++ if (of_machine_is_compatible("lantiq,ase")) {
++ priv->clk_ephy = clk_get(&pdev->dev, "ephy");
++ if (IS_ERR(priv->clk_ephy))
++ return PTR_ERR(priv->clk_ephy);
++ priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu");
++ if (IS_ERR(priv->clk_ephycgu))
++ return PTR_ERR(priv->clk_ephycgu);
++ }
++
+ spin_lock_init(&priv->lock);
+
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- if (IS_TX(i))
+- netif_napi_add(dev, &priv->ch[i].napi,
+- ltq_etop_poll_tx, 8);
+- else if (IS_RX(i))
+- netif_napi_add(dev, &priv->ch[i].napi,
+- ltq_etop_poll_rx, 32);
+- priv->ch[i].netdev = dev;
+- }
++ netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
++ netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
++ priv->txch.netdev = dev;
++ priv->rxch.netdev = dev;
+
+ err = register_netdev(dev);
+ if (err)
+@@ -786,32 +1018,23 @@ ltq_etop_remove(struct platform_device *pdev)
+ return 0;
+ }
+
++static const struct of_device_id ltq_etop_match[] = {
++ { .compatible = "lantiq,etop-xway" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ltq_etop_match);
++
+ static struct platform_driver ltq_mii_driver = {
++ .probe = ltq_etop_probe,
+ .remove = ltq_etop_remove,
+ .driver = {
+ .name = "ltq_etop",
+ .owner = THIS_MODULE,
++ .of_match_table = ltq_etop_match,
+ },
+ };
+
+-int __init
+-init_ltq_etop(void)
+-{
+- int ret = platform_driver_probe(<q_mii_driver, ltq_etop_probe);
+-
+- if (ret)
+- pr_err("ltq_etop: Error registering platform driver!");
+- return ret;
+-}
+-
+-static void __exit
+-exit_ltq_etop(void)
+-{
+- platform_driver_unregister(<q_mii_driver);
+-}
+-
+-module_init(init_ltq_etop);
+-module_exit(exit_ltq_etop);
++module_platform_driver(ltq_mii_driver);
+
+ MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+ MODULE_DESCRIPTION("Lantiq SoC ETOP");
+--
+1.7.10.4
+
+++ /dev/null
-From 855c99aff4c1fb440a679cc8481947daf95643b8 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 09:29:37 +0100
-Subject: [PATCH 28/31] SPI: MIPS: lantiq: adds spi-xway
-
-This patch adds support for the SPI core found on several Lantiq SoCs.
-The Driver has been runtime tested in combination with m25p80 Flash Devices
-on Amazon_SE and VR9.
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/spi/Kconfig | 8 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-xway.c | 977 ++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 986 insertions(+)
- create mode 100644 drivers/spi/spi-xway.c
-
-diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
-index 581ee2a..b2cd93c 100644
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -527,6 +527,14 @@ config SPI_NUC900
- help
- SPI driver for Nuvoton NUC900 series ARM SoCs
-
-+config SPI_XWAY
-+ tristate "Lantiq XWAY SPI controller"
-+ depends on LANTIQ && SOC_TYPE_XWAY
-+ select SPI_BITBANG
-+ help
-+ This driver supports the Lantiq SoC SPI controller in master
-+ mode.
-+
- #
- # Add new SPI master controllers in alphabetical order above this line
- #
-diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
-index 95af48d..82d3799 100644
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -79,3 +79,4 @@ obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
- obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
- obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
- obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
-+obj-$(CONFIG_SPI_XWAY) += spi-xway.o
-diff --git a/drivers/spi/spi-xway.c b/drivers/spi/spi-xway.c
-new file mode 100644
-index 0000000..61532e3
---- /dev/null
-+++ b/drivers/spi/spi-xway.c
-@@ -0,0 +1,977 @@
-+/*
-+ * Lantiq SoC SPI controller
-+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/workqueue.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/sched.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/completion.h>
-+#include <linux/spinlock.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+#include <linux/of_irq.h>
-+
-+#include <lantiq_soc.h>
-+
-+#define LTQ_SPI_CLC 0x00 /* Clock control */
-+#define LTQ_SPI_PISEL 0x04 /* Port input select */
-+#define LTQ_SPI_ID 0x08 /* Identification */
-+#define LTQ_SPI_CON 0x10 /* Control */
-+#define LTQ_SPI_STAT 0x14 /* Status */
-+#define LTQ_SPI_WHBSTATE 0x18 /* Write HW modified state */
-+#define LTQ_SPI_TB 0x20 /* Transmit buffer */
-+#define LTQ_SPI_RB 0x24 /* Receive buffer */
-+#define LTQ_SPI_RXFCON 0x30 /* Receive FIFO control */
-+#define LTQ_SPI_TXFCON 0x34 /* Transmit FIFO control */
-+#define LTQ_SPI_FSTAT 0x38 /* FIFO status */
-+#define LTQ_SPI_BRT 0x40 /* Baudrate timer */
-+#define LTQ_SPI_BRSTAT 0x44 /* Baudrate timer status */
-+#define LTQ_SPI_SFCON 0x60 /* Serial frame control */
-+#define LTQ_SPI_SFSTAT 0x64 /* Serial frame status */
-+#define LTQ_SPI_GPOCON 0x70 /* General purpose output control */
-+#define LTQ_SPI_GPOSTAT 0x74 /* General purpose output status */
-+#define LTQ_SPI_FGPO 0x78 /* Forced general purpose output */
-+#define LTQ_SPI_RXREQ 0x80 /* Receive request */
-+#define LTQ_SPI_RXCNT 0x84 /* Receive count */
-+#define LTQ_SPI_DMACON 0xEC /* DMA control */
-+#define LTQ_SPI_IRNEN 0xF4 /* Interrupt node enable */
-+#define LTQ_SPI_IRNICR 0xF8 /* Interrupt node interrupt capture */
-+#define LTQ_SPI_IRNCR 0xFC /* Interrupt node control */
-+
-+#define LTQ_SPI_CLC_SMC_SHIFT 16 /* Clock divider for sleep mode */
-+#define LTQ_SPI_CLC_SMC_MASK 0xFF
-+#define LTQ_SPI_CLC_RMC_SHIFT 8 /* Clock divider for normal run mode */
-+#define LTQ_SPI_CLC_RMC_MASK 0xFF
-+#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */
-+#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */
-+
-+#define LTQ_SPI_ID_TXFS_SHIFT 24 /* Implemented TX FIFO size */
-+#define LTQ_SPI_ID_TXFS_MASK 0x3F
-+#define LTQ_SPI_ID_RXFS_SHIFT 16 /* Implemented RX FIFO size */
-+#define LTQ_SPI_ID_RXFS_MASK 0x3F
-+#define LTQ_SPI_ID_REV_MASK 0x1F /* Hardware revision number */
-+#define LTQ_SPI_ID_CFG BIT(5) /* DMA interface support */
-+
-+#define LTQ_SPI_CON_BM_SHIFT 16 /* Data width selection */
-+#define LTQ_SPI_CON_BM_MASK 0x1F
-+#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */
-+#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */
-+#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */
-+#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
-+#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
-+#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */
-+#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */
-+#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
-+#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */
-+#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */
-+#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */
-+#define LTQ_SPI_CON_HB BIT(4) /* Heading control */
-+#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */
-+#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
-+
-+#define LTQ_SPI_STAT_RXBV_MASK 0x7
-+#define LTQ_SPI_STAT_RXBV_SHIFT 28
-+#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */
-+#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
-+#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
-+#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */
-+#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */
-+#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */
-+#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */
-+#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */
-+
-+#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
-+#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
-+#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
-+#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
-+#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error
-+ flag */
-+#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
-+#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
-+#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
-+#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
-+#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
-+#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
-+#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
-+#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
-+#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
-+#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
-+#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
-+#define LTQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50
-+
-+#define LTQ_SPI_RXFCON_RXFITL_SHIFT 8 /* FIFO interrupt trigger level */
-+#define LTQ_SPI_RXFCON_RXFITL_MASK 0x3F
-+#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
-+#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
-+
-+#define LTQ_SPI_TXFCON_TXFITL_SHIFT 8 /* FIFO interrupt trigger level */
-+#define LTQ_SPI_TXFCON_TXFITL_MASK 0x3F
-+#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
-+#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
-+
-+#define LTQ_SPI_FSTAT_RXFFL_MASK 0x3f
-+#define LTQ_SPI_FSTAT_RXFFL_SHIFT 0
-+#define LTQ_SPI_FSTAT_TXFFL_MASK 0x3f
-+#define LTQ_SPI_FSTAT_TXFFL_SHIFT 8
-+
-+#define LTQ_SPI_GPOCON_ISCSBN_SHIFT 8
-+#define LTQ_SPI_GPOCON_INVOUTN_SHIFT 0
-+
-+#define LTQ_SPI_FGPO_SETOUTN_SHIFT 8
-+#define LTQ_SPI_FGPO_CLROUTN_SHIFT 0
-+
-+#define LTQ_SPI_RXREQ_RXCNT_MASK 0xFFFF /* Receive count value */
-+#define LTQ_SPI_RXCNT_TODO_MASK 0xFFFF /* Recevie to-do value */
-+
-+#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
-+#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */
-+#define LTQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */
-+#define LTQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */
-+#define LTQ_SPI_IRNEN_ALL 0xF
-+
-+struct ltq_spi {
-+ struct spi_bitbang bitbang;
-+ struct completion done;
-+ spinlock_t lock;
-+
-+ struct device *dev;
-+ void __iomem *base;
-+ struct clk *fpiclk;
-+ struct clk *spiclk;
-+
-+ int status;
-+ int irq[3];
-+
-+ const u8 *tx;
-+ u8 *rx;
-+ u32 tx_cnt;
-+ u32 rx_cnt;
-+ u32 len;
-+ struct spi_transfer *curr_transfer;
-+
-+ u32 (*get_tx) (struct ltq_spi *);
-+
-+ u16 txfs;
-+ u16 rxfs;
-+ unsigned dma_support:1;
-+ unsigned cfg_mode:1;
-+};
-+
-+static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi)
-+{
-+ return spi_master_get_devdata(spi->master);
-+}
-+
-+static inline u32 ltq_spi_reg_read(struct ltq_spi *hw, u32 reg)
-+{
-+ return ioread32be(hw->base + reg);
-+}
-+
-+static inline void ltq_spi_reg_write(struct ltq_spi *hw, u32 val, u32 reg)
-+{
-+ iowrite32be(val, hw->base + reg);
-+}
-+
-+static inline void ltq_spi_reg_setbit(struct ltq_spi *hw, u32 bits, u32 reg)
-+{
-+ u32 val;
-+
-+ val = ltq_spi_reg_read(hw, reg);
-+ val |= bits;
-+ ltq_spi_reg_write(hw, val, reg);
-+}
-+
-+static inline void ltq_spi_reg_clearbit(struct ltq_spi *hw, u32 bits, u32 reg)
-+{
-+ u32 val;
-+
-+ val = ltq_spi_reg_read(hw, reg);
-+ val &= ~bits;
-+ ltq_spi_reg_write(hw, val, reg);
-+}
-+
-+static void ltq_spi_hw_enable(struct ltq_spi *hw)
-+{
-+ u32 clc;
-+
-+ /* Power-up module */
-+ clk_enable(hw->spiclk);
-+
-+ /*
-+ * Set clock divider for run mode to 1 to
-+ * run at same frequency as FPI bus
-+ */
-+ clc = (1 << LTQ_SPI_CLC_RMC_SHIFT);
-+ ltq_spi_reg_write(hw, clc, LTQ_SPI_CLC);
-+}
-+
-+static void ltq_spi_hw_disable(struct ltq_spi *hw)
-+{
-+ /* Set clock divider to 0 and set module disable bit */
-+ ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC);
-+
-+ /* Power-down module */
-+ clk_disable(hw->spiclk);
-+}
-+
-+static void ltq_spi_reset_fifos(struct ltq_spi *hw)
-+{
-+ u32 val;
-+
-+ /*
-+ * Enable and flush FIFOs. Set interrupt trigger level to
-+ * half of FIFO count implemented in hardware.
-+ */
-+ if (hw->txfs > 1) {
-+ val = hw->txfs << (LTQ_SPI_TXFCON_TXFITL_SHIFT - 1);
-+ val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
-+ ltq_spi_reg_write(hw, val, LTQ_SPI_TXFCON);
-+ }
-+
-+ if (hw->rxfs > 1) {
-+ val = hw->rxfs << (LTQ_SPI_RXFCON_RXFITL_SHIFT - 1);
-+ val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
-+ ltq_spi_reg_write(hw, val, LTQ_SPI_RXFCON);
-+ }
-+}
-+
-+static inline int ltq_spi_wait_ready(struct ltq_spi *hw)
-+{
-+ u32 stat;
-+ unsigned long timeout;
-+
-+ timeout = jiffies + msecs_to_jiffies(200);
-+
-+ do {
-+ stat = ltq_spi_reg_read(hw, LTQ_SPI_STAT);
-+ if (!(stat & LTQ_SPI_STAT_BSY))
-+ return 0;
-+
-+ cond_resched();
-+ } while (!time_after_eq(jiffies, timeout));
-+
-+ dev_err(hw->dev, "SPI wait ready timed out stat: %x\n", stat);
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static void ltq_spi_config_mode_set(struct ltq_spi *hw)
-+{
-+ if (hw->cfg_mode)
-+ return;
-+
-+ /*
-+ * Putting the SPI module in config mode is only safe if no
-+ * transfer is in progress as indicated by busy flag STATE.BSY.
-+ */
-+ if (ltq_spi_wait_ready(hw)) {
-+ ltq_spi_reset_fifos(hw);
-+ hw->status = -ETIMEDOUT;
-+ }
-+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE);
-+
-+ hw->cfg_mode = 1;
-+}
-+
-+static void ltq_spi_run_mode_set(struct ltq_spi *hw)
-+{
-+ if (!hw->cfg_mode)
-+ return;
-+
-+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE);
-+
-+ hw->cfg_mode = 0;
-+}
-+
-+static u32 ltq_spi_tx_word_u8(struct ltq_spi *hw)
-+{
-+ const u8 *tx = hw->tx;
-+ u32 data = *tx++;
-+
-+ hw->tx_cnt++;
-+ hw->tx++;
-+
-+ return data;
-+}
-+
-+static u32 ltq_spi_tx_word_u16(struct ltq_spi *hw)
-+{
-+ const u16 *tx = (u16 *) hw->tx;
-+ u32 data = *tx++;
-+
-+ hw->tx_cnt += 2;
-+ hw->tx += 2;
-+
-+ return data;
-+}
-+
-+static u32 ltq_spi_tx_word_u32(struct ltq_spi *hw)
-+{
-+ const u32 *tx = (u32 *) hw->tx;
-+ u32 data = *tx++;
-+
-+ hw->tx_cnt += 4;
-+ hw->tx += 4;
-+
-+ return data;
-+}
-+
-+static void ltq_spi_bits_per_word_set(struct spi_device *spi)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u32 bm;
-+ u8 bits_per_word = spi->bits_per_word;
-+
-+ /*
-+ * Use either default value of SPI device or value
-+ * from current transfer.
-+ */
-+ if (hw->curr_transfer && hw->curr_transfer->bits_per_word)
-+ bits_per_word = hw->curr_transfer->bits_per_word;
-+
-+ if (bits_per_word <= 8)
-+ hw->get_tx = ltq_spi_tx_word_u8;
-+ else if (bits_per_word <= 16)
-+ hw->get_tx = ltq_spi_tx_word_u16;
-+ else if (bits_per_word <= 32)
-+ hw->get_tx = ltq_spi_tx_word_u32;
-+
-+ /* CON.BM value = bits_per_word - 1 */
-+ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT;
-+
-+ ltq_spi_reg_clearbit(hw, LTQ_SPI_CON_BM_MASK <<
-+ LTQ_SPI_CON_BM_SHIFT, LTQ_SPI_CON);
-+ ltq_spi_reg_setbit(hw, bm, LTQ_SPI_CON);
-+}
-+
-+static void ltq_spi_speed_set(struct spi_device *spi)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u32 br, max_speed_hz, spi_clk;
-+ u32 speed_hz = spi->max_speed_hz;
-+
-+ /*
-+ * Use either default value of SPI device or value
-+ * from current transfer.
-+ */
-+ if (hw->curr_transfer && hw->curr_transfer->speed_hz)
-+ speed_hz = hw->curr_transfer->speed_hz;
-+
-+ /*
-+ * SPI module clock is derived from FPI bus clock dependent on
-+ * divider value in CLC.RMS which is always set to 1.
-+ */
-+ spi_clk = clk_get_rate(hw->fpiclk);
-+
-+ /*
-+ * Maximum SPI clock frequency in master mode is half of
-+ * SPI module clock frequency. Maximum reload value of
-+ * baudrate generator BR is 2^16.
-+ */
-+ max_speed_hz = spi_clk / 2;
-+ if (speed_hz >= max_speed_hz)
-+ br = 0;
-+ else
-+ br = (max_speed_hz / speed_hz) - 1;
-+
-+ if (br > 0xFFFF)
-+ br = 0xFFFF;
-+
-+ ltq_spi_reg_write(hw, br, LTQ_SPI_BRT);
-+}
-+
-+static void ltq_spi_clockmode_set(struct spi_device *spi)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u32 con;
-+
-+ con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
-+
-+ /*
-+ * SPI mode mapping in CON register:
-+ * Mode CPOL CPHA CON.PO CON.PH
-+ * 0 0 0 0 1
-+ * 1 0 1 0 0
-+ * 2 1 0 1 1
-+ * 3 1 1 1 0
-+ */
-+ if (spi->mode & SPI_CPHA)
-+ con &= ~LTQ_SPI_CON_PH;
-+ else
-+ con |= LTQ_SPI_CON_PH;
-+
-+ if (spi->mode & SPI_CPOL)
-+ con |= LTQ_SPI_CON_PO;
-+ else
-+ con &= ~LTQ_SPI_CON_PO;
-+
-+ /* Set heading control */
-+ if (spi->mode & SPI_LSB_FIRST)
-+ con &= ~LTQ_SPI_CON_HB;
-+ else
-+ con |= LTQ_SPI_CON_HB;
-+
-+ ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
-+}
-+
-+static void ltq_spi_xmit_set(struct ltq_spi *hw, struct spi_transfer *t)
-+{
-+ u32 con;
-+
-+ con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
-+
-+ if (t) {
-+ if (t->tx_buf && t->rx_buf) {
-+ con &= ~(LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
-+ } else if (t->rx_buf) {
-+ con &= ~LTQ_SPI_CON_RXOFF;
-+ con |= LTQ_SPI_CON_TXOFF;
-+ } else if (t->tx_buf) {
-+ con &= ~LTQ_SPI_CON_TXOFF;
-+ con |= LTQ_SPI_CON_RXOFF;
-+ }
-+ } else
-+ con |= (LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
-+
-+ ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
-+}
-+
-+static void ltq_spi_internal_cs_activate(struct spi_device *spi)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u32 fgpo;
-+
-+ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_CLROUTN_SHIFT));
-+ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-+}
-+
-+static void ltq_spi_internal_cs_deactivate(struct spi_device *spi)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u32 fgpo;
-+
-+ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
-+ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-+}
-+
-+static void ltq_spi_chipselect(struct spi_device *spi, int cs)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+
-+ switch (cs) {
-+ case BITBANG_CS_ACTIVE:
-+ ltq_spi_bits_per_word_set(spi);
-+ ltq_spi_speed_set(spi);
-+ ltq_spi_clockmode_set(spi);
-+ ltq_spi_run_mode_set(hw);
-+ ltq_spi_internal_cs_activate(spi);
-+ break;
-+
-+ case BITBANG_CS_INACTIVE:
-+ ltq_spi_internal_cs_deactivate(spi);
-+ ltq_spi_config_mode_set(hw);
-+ break;
-+ }
-+}
-+
-+static int ltq_spi_setup_transfer(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u8 bits_per_word = spi->bits_per_word;
-+
-+ hw->curr_transfer = t;
-+
-+ if (t && t->bits_per_word)
-+ bits_per_word = t->bits_per_word;
-+
-+ if (bits_per_word > 32)
-+ return -EINVAL;
-+
-+ ltq_spi_config_mode_set(hw);
-+
-+ return 0;
-+}
-+
-+static int ltq_spi_setup(struct spi_device *spi)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u32 gpocon, fgpo;
-+
-+ /* Set default word length to 8 if not set */
-+ if (!spi->bits_per_word)
-+ spi->bits_per_word = 8;
-+
-+ if (spi->bits_per_word > 32)
-+ return -EINVAL;
-+
-+ /*
-+ * Up to six GPIOs can be connected to the SPI module
-+ * via GPIO alternate function to control the chip select lines.
-+ */
-+ gpocon = (1 << (spi->chip_select +
-+ LTQ_SPI_GPOCON_ISCSBN_SHIFT));
-+
-+ if (spi->mode & SPI_CS_HIGH)
-+ gpocon |= (1 << spi->chip_select);
-+
-+ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
-+
-+ ltq_spi_reg_setbit(hw, gpocon, LTQ_SPI_GPOCON);
-+ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-+
-+ return 0;
-+}
-+
-+static void ltq_spi_cleanup(struct spi_device *spi)
-+{
-+
-+}
-+
-+static void ltq_spi_txfifo_write(struct ltq_spi *hw)
-+{
-+ u32 fstat, data;
-+ u16 fifo_space;
-+
-+ /* Determine how much FIFOs are free for TX data */
-+ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
-+ fifo_space = hw->txfs - ((fstat >> LTQ_SPI_FSTAT_TXFFL_SHIFT) &
-+ LTQ_SPI_FSTAT_TXFFL_MASK);
-+
-+ if (!fifo_space)
-+ return;
-+
-+ while (hw->tx_cnt < hw->len && fifo_space) {
-+ data = hw->get_tx(hw);
-+ ltq_spi_reg_write(hw, data, LTQ_SPI_TB);
-+ fifo_space--;
-+ }
-+}
-+
-+static void ltq_spi_rxfifo_read(struct ltq_spi *hw)
-+{
-+ u32 fstat, data, *rx32;
-+ u16 fifo_fill;
-+ u8 rxbv, shift, *rx8;
-+
-+ /* Determine how much FIFOs are filled with RX data */
-+ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
-+ fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT)
-+ & LTQ_SPI_FSTAT_RXFFL_MASK);
-+
-+ if (!fifo_fill)
-+ return;
-+
-+ /*
-+ * The 32 bit FIFO is always used completely independent from the
-+ * bits_per_word value. Thus four bytes have to be read at once
-+ * per FIFO.
-+ */
-+ rx32 = (u32 *) hw->rx;
-+ while (hw->len - hw->rx_cnt >= 4 && fifo_fill) {
-+ *rx32++ = ltq_spi_reg_read(hw, LTQ_SPI_RB);
-+ hw->rx_cnt += 4;
-+ hw->rx += 4;
-+ fifo_fill--;
-+ }
-+
-+ /*
-+ * If there are remaining bytes, read byte count from STAT.RXBV
-+ * register and read the data byte-wise.
-+ */
-+ while (fifo_fill && hw->rx_cnt < hw->len) {
-+ rxbv = (ltq_spi_reg_read(hw, LTQ_SPI_STAT) >>
-+ LTQ_SPI_STAT_RXBV_SHIFT) & LTQ_SPI_STAT_RXBV_MASK;
-+ data = ltq_spi_reg_read(hw, LTQ_SPI_RB);
-+
-+ shift = (rxbv - 1) * 8;
-+ rx8 = hw->rx;
-+
-+ while (rxbv) {
-+ *rx8++ = (data >> shift) & 0xFF;
-+ rxbv--;
-+ shift -= 8;
-+ hw->rx_cnt++;
-+ hw->rx++;
-+ }
-+
-+ fifo_fill--;
-+ }
-+}
-+
-+static void ltq_spi_rxreq_set(struct ltq_spi *hw)
-+{
-+ u32 rxreq, rxreq_max, rxtodo;
-+
-+ rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK;
-+
-+ /*
-+ * In RX-only mode the serial clock is activated only after writing
-+ * the expected amount of RX bytes into RXREQ register.
-+ * To avoid receive overflows at high clocks it is better to request
-+ * only the amount of bytes that fits into all FIFOs. This value
-+ * depends on the FIFO size implemented in hardware.
-+ */
-+ rxreq = hw->len - hw->rx_cnt;
-+ rxreq_max = hw->rxfs << 2;
-+ rxreq = min(rxreq_max, rxreq);
-+
-+ if (!rxtodo && rxreq)
-+ ltq_spi_reg_write(hw, rxreq, LTQ_SPI_RXREQ);
-+}
-+
-+static inline void ltq_spi_complete(struct ltq_spi *hw)
-+{
-+ complete(&hw->done);
-+}
-+
-+irqreturn_t ltq_spi_tx_irq(int irq, void *data)
-+{
-+ struct ltq_spi *hw = data;
-+ unsigned long flags;
-+ int completed = 0;
-+
-+ spin_lock_irqsave(&hw->lock, flags);
-+
-+ if (hw->tx_cnt < hw->len)
-+ ltq_spi_txfifo_write(hw);
-+
-+ if (hw->tx_cnt == hw->len)
-+ completed = 1;
-+
-+ spin_unlock_irqrestore(&hw->lock, flags);
-+
-+ if (completed)
-+ ltq_spi_complete(hw);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+irqreturn_t ltq_spi_rx_irq(int irq, void *data)
-+{
-+ struct ltq_spi *hw = data;
-+ unsigned long flags;
-+ int completed = 0;
-+
-+ spin_lock_irqsave(&hw->lock, flags);
-+
-+ if (hw->rx_cnt < hw->len) {
-+ ltq_spi_rxfifo_read(hw);
-+
-+ if (hw->tx && hw->tx_cnt < hw->len)
-+ ltq_spi_txfifo_write(hw);
-+ }
-+
-+ if (hw->rx_cnt == hw->len)
-+ completed = 1;
-+ else if (!hw->tx)
-+ ltq_spi_rxreq_set(hw);
-+
-+ spin_unlock_irqrestore(&hw->lock, flags);
-+
-+ if (completed)
-+ ltq_spi_complete(hw);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+irqreturn_t ltq_spi_err_irq(int irq, void *data)
-+{
-+ struct ltq_spi *hw = data;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&hw->lock, flags);
-+
-+ /* Disable all interrupts */
-+ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
-+
-+ /* Clear all error flags */
-+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
-+
-+ /* Flush FIFOs */
-+ ltq_spi_reg_setbit(hw, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON);
-+ ltq_spi_reg_setbit(hw, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON);
-+
-+ hw->status = -EIO;
-+ spin_unlock_irqrestore(&hw->lock, flags);
-+
-+ ltq_spi_complete(hw);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int ltq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u32 irq_flags = 0;
-+
-+ hw->tx = t->tx_buf;
-+ hw->rx = t->rx_buf;
-+ hw->len = t->len;
-+ hw->tx_cnt = 0;
-+ hw->rx_cnt = 0;
-+ hw->status = 0;
-+ INIT_COMPLETION(hw->done);
-+
-+ ltq_spi_xmit_set(hw, t);
-+
-+ /* Enable error interrupts */
-+ ltq_spi_reg_setbit(hw, LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN);
-+
-+ if (hw->tx) {
-+ /* Initially fill TX FIFO with as much data as possible */
-+ ltq_spi_txfifo_write(hw);
-+ irq_flags |= LTQ_SPI_IRNEN_T;
-+
-+ /* Always enable RX interrupt in Full Duplex mode */
-+ if (hw->rx)
-+ irq_flags |= LTQ_SPI_IRNEN_R;
-+ } else if (hw->rx) {
-+ /* Start RX clock */
-+ ltq_spi_rxreq_set(hw);
-+
-+ /* Enable RX interrupt to receive data from RX FIFOs */
-+ irq_flags |= LTQ_SPI_IRNEN_R;
-+ }
-+
-+ /* Enable TX or RX interrupts */
-+ ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN);
-+ wait_for_completion_interruptible(&hw->done);
-+
-+ /* Disable all interrupts */
-+ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
-+
-+ /*
-+ * Return length of current transfer for bitbang utility code if
-+ * no errors occured during transmission.
-+ */
-+ if (!hw->status)
-+ hw->status = hw->len;
-+
-+ return hw->status;
-+}
-+
-+static const struct ltq_spi_irq_map {
-+ char *name;
-+ irq_handler_t handler;
-+} ltq_spi_irqs[] = {
-+ { "spi_rx", ltq_spi_rx_irq },
-+ { "spi_tx", ltq_spi_tx_irq },
-+ { "spi_err", ltq_spi_err_irq },
-+};
-+
-+static int ltq_spi_probe(struct platform_device *pdev)
-+{
-+ struct resource irqres[3];
-+ struct spi_master *master;
-+ struct resource *r;
-+ struct ltq_spi *hw;
-+ int ret, i;
-+ u32 data, id;
-+
-+ if (of_irq_to_resource_table(pdev->dev.of_node, irqres, 3) != 3) {
-+ dev_err(&pdev->dev, "IRQ settings missing in device tree\n");
-+ return -EINVAL;
-+ }
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof(struct ltq_spi));
-+ if (!master) {
-+ dev_err(&pdev->dev, "spi_alloc_master\n");
-+ ret = -ENOMEM;
-+ goto err;
-+ }
-+
-+ hw = spi_master_get_devdata(master);
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (r == NULL) {
-+ dev_err(&pdev->dev, "platform_get_resource\n");
-+ ret = -ENOENT;
-+ goto err_master;
-+ }
-+
-+ r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
-+ pdev->name);
-+ if (!r) {
-+ dev_err(&pdev->dev, "failed to request memory region\n");
-+ ret = -ENXIO;
-+ goto err_master;
-+ }
-+
-+ hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
-+ if (!hw->base) {
-+ dev_err(&pdev->dev, "failed to remap memory region\n");
-+ ret = -ENXIO;
-+ goto err_master;
-+ }
-+
-+ memset(hw->irq, 0, sizeof(hw->irq));
-+ for (i = 0; i < ARRAY_SIZE(ltq_spi_irqs); i++) {
-+ hw->irq[i] = irqres[i].start;
-+ ret = request_irq(hw->irq[i], ltq_spi_irqs[i].handler,
-+ 0, ltq_spi_irqs[i].name, hw);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to request %s irq (%d)\n",
-+ ltq_spi_irqs[i].name, hw->irq[i]);
-+ goto err_irq;
-+ }
-+ }
-+
-+ hw->fpiclk = clk_get_fpi();
-+ if (IS_ERR(hw->fpiclk)) {
-+ dev_err(&pdev->dev, "failed to get fpi clock\n");
-+ ret = PTR_ERR(hw->fpiclk);
-+ goto err_clk;
-+ }
-+
-+ hw->spiclk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(hw->spiclk)) {
-+ dev_err(&pdev->dev, "failed to get spi clock gate\n");
-+ ret = PTR_ERR(hw->spiclk);
-+ goto err_clk;
-+ }
-+
-+ hw->bitbang.master = spi_master_get(master);
-+ hw->bitbang.chipselect = ltq_spi_chipselect;
-+ hw->bitbang.setup_transfer = ltq_spi_setup_transfer;
-+ hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs;
-+
-+ if (of_machine_is_compatible("lantiq,ase"))
-+ master->num_chipselect = 3;
-+ else
-+ master->num_chipselect = 6;
-+ master->bus_num = pdev->id;
-+ master->setup = ltq_spi_setup;
-+ master->cleanup = ltq_spi_cleanup;
-+ master->dev.of_node = pdev->dev.of_node;
-+
-+ hw->dev = &pdev->dev;
-+ init_completion(&hw->done);
-+ spin_lock_init(&hw->lock);
-+
-+ ltq_spi_hw_enable(hw);
-+
-+ /* Read module capabilities */
-+ id = ltq_spi_reg_read(hw, LTQ_SPI_ID);
-+ hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
-+ hw->rxfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
-+ hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0;
-+
-+ ltq_spi_config_mode_set(hw);
-+
-+ /* Enable error checking, disable TX/RX, set idle value high */
-+ data = LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
-+ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN |
-+ LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_IDLE;
-+ ltq_spi_reg_write(hw, data, LTQ_SPI_CON);
-+
-+ /* Enable master mode and clear error flags */
-+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETMS |
-+ LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
-+
-+ /* Reset GPIO/CS registers */
-+ ltq_spi_reg_write(hw, 0x0, LTQ_SPI_GPOCON);
-+ ltq_spi_reg_write(hw, 0xFF00, LTQ_SPI_FGPO);
-+
-+ /* Enable and flush FIFOs */
-+ ltq_spi_reset_fifos(hw);
-+
-+ ret = spi_bitbang_start(&hw->bitbang);
-+ if (ret) {
-+ dev_err(&pdev->dev, "spi_bitbang_start failed\n");
-+ goto err_bitbang;
-+ }
-+
-+ platform_set_drvdata(pdev, hw);
-+
-+ pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n",
-+ id & LTQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support);
-+
-+ return 0;
-+
-+err_bitbang:
-+ ltq_spi_hw_disable(hw);
-+
-+err_clk:
-+ if (hw->fpiclk)
-+ clk_put(hw->fpiclk);
-+ if (hw->spiclk)
-+ clk_put(hw->spiclk);
-+
-+err_irq:
-+ clk_put(hw->fpiclk);
-+
-+ for (; i > 0; i--)
-+ free_irq(hw->irq[i], hw);
-+
-+err_master:
-+ spi_master_put(master);
-+
-+err:
-+ return ret;
-+}
-+
-+static int ltq_spi_remove(struct platform_device *pdev)
-+{
-+ struct ltq_spi *hw = platform_get_drvdata(pdev);
-+ int ret, i;
-+
-+ ret = spi_bitbang_stop(&hw->bitbang);
-+ if (ret)
-+ return ret;
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ ltq_spi_config_mode_set(hw);
-+ ltq_spi_hw_disable(hw);
-+
-+ for (i = 0; i < ARRAY_SIZE(hw->irq); i++)
-+ if (0 < hw->irq[i])
-+ free_irq(hw->irq[i], hw);
-+
-+ if (hw->fpiclk)
-+ clk_put(hw->fpiclk);
-+ if (hw->spiclk)
-+ clk_put(hw->spiclk);
-+
-+ spi_master_put(hw->bitbang.master);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id ltq_spi_match[] = {
-+ { .compatible = "lantiq,spi-xway" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ltq_spi_match);
-+
-+static struct platform_driver ltq_spi_driver = {
-+ .probe = ltq_spi_probe,
-+ .remove = ltq_spi_remove,
-+ .driver = {
-+ .name = "spi-xway",
-+ .owner = THIS_MODULE,
-+ .of_match_table = ltq_spi_match,
-+ },
-+};
-+
-+module_platform_driver(ltq_spi_driver);
-+
-+MODULE_DESCRIPTION("Lantiq SoC SPI controller driver");
-+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:spi-xway");
---
-1.7.10.4
-
--- /dev/null
+From 7e178ce2e5f3aef38d4bdd2c0e02eae6100d5af4 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 7 Aug 2014 18:22:19 +0200
+Subject: [PATCH 29/36] GPIO: MIPS: lantiq: add gpio driver for falcon SoC
+
+Add driver for GPIO blocks found on Lantiq FALCON SoC. The SoC has 5 banks of
+up to 32 pads. The GPIO blocks have a per pin IRQs.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Acked-by: John Crispin <blogic@openwrt.org>
+Cc: linux-mips@linux-mips.org
+Cc: linux-gpio@vger.kernel.org
+---
+ drivers/gpio/Kconfig | 5 +
+ drivers/gpio/Makefile | 1 +
+ drivers/gpio/gpio-falcon.c | 348 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 354 insertions(+)
+ create mode 100644 drivers/gpio/gpio-falcon.c
+
+diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
+index 903f24d..670c064 100644
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -145,6 +145,11 @@ config GPIO_EP93XX
+ depends on ARCH_EP93XX
+ select GPIO_GENERIC
+
++config GPIO_FALCON
++ def_bool y
++ depends on MIPS && SOC_FALCON
++ select GPIO_GENERIC
++
+ config GPIO_MM_LANTIQ
+ bool "Lantiq Memory mapped GPIOs"
+ depends on LANTIQ && SOC_XWAY
+diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
+index 5d50179..c92db39 100644
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
+ obj-$(CONFIG_GPIO_EM) += gpio-em.o
+ obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
+ obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
++obj-$(CONFIG_GPIO_FALCON) += gpio-falcon.o
+ obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
+ obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
+ obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
+diff --git a/drivers/gpio/gpio-falcon.c b/drivers/gpio/gpio-falcon.c
+new file mode 100644
+index 0000000..ae3bdfb
+--- /dev/null
++++ b/drivers/gpio/gpio-falcon.c
+@@ -0,0 +1,348 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/gpio.h>
++#include <linux/interrupt.h>
++#include <linux/slab.h>
++#include <linux/export.h>
++#include <linux/err.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/pinctrl/pinctrl.h>
++#include <linux/pinctrl/consumer.h>
++#include <linux/platform_device.h>
++
++#include <lantiq_soc.h>
++
++/* Data Output Register */
++#define GPIO_OUT 0x00000000
++/* Data Input Register */
++#define GPIO_IN 0x00000004
++/* Direction Register */
++#define GPIO_DIR 0x00000008
++/* External Interrupt Control Register 0 */
++#define GPIO_EXINTCR0 0x00000018
++/* External Interrupt Control Register 1 */
++#define GPIO_EXINTCR1 0x0000001C
++/* IRN Capture Register */
++#define GPIO_IRNCR 0x00000020
++/* IRN Interrupt Configuration Register */
++#define GPIO_IRNCFG 0x0000002C
++/* IRN Interrupt Enable Set Register */
++#define GPIO_IRNRNSET 0x00000030
++/* IRN Interrupt Enable Clear Register */
++#define GPIO_IRNENCLR 0x00000034
++/* Output Set Register */
++#define GPIO_OUTSET 0x00000040
++/* Output Cler Register */
++#define GPIO_OUTCLR 0x00000044
++/* Direction Clear Register */
++#define GPIO_DIRSET 0x00000048
++/* Direction Set Register */
++#define GPIO_DIRCLR 0x0000004C
++
++/* turn a gpio_chip into a falcon_gpio_port */
++#define ctop(c) container_of(c, struct falcon_gpio_port, gpio_chip)
++/* turn a irq_data into a falcon_gpio_port */
++#define itop(i) ((struct falcon_gpio_port *) irq_get_chip_data(i->irq))
++
++#define port_r32(p, reg) ltq_r32(p->port + reg)
++#define port_w32(p, val, reg) ltq_w32(val, p->port + reg)
++#define port_w32_mask(p, clear, set, reg) \
++ port_w32(p, (port_r32(p, reg) & ~(clear)) | (set), reg)
++
++#define MAX_BANKS 5
++#define PINS_PER_PORT 32
++
++struct falcon_gpio_port {
++ struct gpio_chip gpio_chip;
++ void __iomem *port;
++ unsigned int irq_base;
++ unsigned int chained_irq;
++ struct clk *clk;
++ char name[6];
++};
++
++static struct irq_chip falcon_gpio_irq_chip;
++
++static int falcon_gpio_direction_input(struct gpio_chip *chip,
++ unsigned int offset)
++{
++ port_w32(ctop(chip), 1 << offset, GPIO_DIRCLR);
++
++ return 0;
++}
++
++static void falcon_gpio_set(struct gpio_chip *chip, unsigned int offset,
++ int value)
++{
++ if (value)
++ port_w32(ctop(chip), 1 << offset, GPIO_OUTSET);
++ else
++ port_w32(ctop(chip), 1 << offset, GPIO_OUTCLR);
++}
++
++static int falcon_gpio_direction_output(struct gpio_chip *chip,
++ unsigned int offset, int value)
++{
++ falcon_gpio_set(chip, offset, value);
++ port_w32(ctop(chip), 1 << offset, GPIO_DIRSET);
++
++ return 0;
++}
++
++static int falcon_gpio_get(struct gpio_chip *chip, unsigned int offset)
++{
++ if ((port_r32(ctop(chip), GPIO_DIR) >> offset) & 1)
++ return (port_r32(ctop(chip), GPIO_OUT) >> offset) & 1;
++ else
++ return (port_r32(ctop(chip), GPIO_IN) >> offset) & 1;
++}
++
++static int falcon_gpio_request(struct gpio_chip *chip, unsigned offset)
++{
++ int gpio = chip->base + offset;
++
++ return pinctrl_request_gpio(gpio);
++}
++
++static void falcon_gpio_free(struct gpio_chip *chip, unsigned offset)
++{
++ int gpio = chip->base + offset;
++
++ pinctrl_free_gpio(gpio);
++}
++
++static int falcon_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
++{
++ return ctop(chip)->irq_base + offset;
++}
++
++static void falcon_gpio_disable_irq(struct irq_data *d)
++{
++ unsigned int offset = d->irq - itop(d)->irq_base;
++
++ port_w32(itop(d), 1 << offset, GPIO_IRNENCLR);
++}
++
++static void falcon_gpio_enable_irq(struct irq_data *d)
++{
++ unsigned int offset = d->irq - itop(d)->irq_base;
++
++ port_w32(itop(d), 1 << offset, GPIO_IRNRNSET);
++}
++
++static void falcon_gpio_ack_irq(struct irq_data *d)
++{
++ unsigned int offset = d->irq - itop(d)->irq_base;
++
++ port_w32(itop(d), 1 << offset, GPIO_IRNCR);
++}
++
++static void falcon_gpio_mask_and_ack_irq(struct irq_data *d)
++{
++ unsigned int offset = d->irq - itop(d)->irq_base;
++
++ port_w32(itop(d), 1 << offset, GPIO_IRNENCLR);
++ port_w32(itop(d), 1 << offset, GPIO_IRNCR);
++}
++
++static int falcon_gpio_irq_type(struct irq_data *d, unsigned int type)
++{
++ unsigned int offset = d->irq - itop(d)->irq_base;
++ unsigned int mask = 1 << offset;
++
++ if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE)
++ return 0;
++
++ if ((type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) != 0) {
++ /* level triggered */
++ port_w32_mask(itop(d), 0, mask, GPIO_IRNCFG);
++ irq_set_chip_and_handler_name(d->irq,
++ &falcon_gpio_irq_chip, handle_level_irq, "mux");
++ } else {
++ /* edge triggered */
++ port_w32_mask(itop(d), mask, 0, GPIO_IRNCFG);
++ irq_set_chip_and_handler_name(d->irq,
++ &falcon_gpio_irq_chip, handle_simple_irq, "mux");
++ }
++
++ if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
++ port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR0);
++ port_w32_mask(itop(d), 0, mask, GPIO_EXINTCR1);
++ } else {
++ if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH)) != 0)
++ /* positive logic: rising edge, high level */
++ port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR0);
++ else
++ /* negative logic: falling edge, low level */
++ port_w32_mask(itop(d), 0, mask, GPIO_EXINTCR0);
++ port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR1);
++ }
++
++ return gpio_direction_input(itop(d)->gpio_chip.base + offset);
++}
++
++static void falcon_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
++{
++ struct falcon_gpio_port *gpio_port = irq_desc_get_handler_data(desc);
++ unsigned long irncr;
++ int offset;
++
++ /* acknowledge interrupt */
++ irncr = port_r32(gpio_port, GPIO_IRNCR);
++ port_w32(gpio_port, irncr, GPIO_IRNCR);
++
++ desc->irq_data.chip->irq_ack(&desc->irq_data);
++
++ for_each_set_bit(offset, &irncr, gpio_port->gpio_chip.ngpio)
++ generic_handle_irq(gpio_port->irq_base + offset);
++}
++
++static int falcon_gpio_irq_map(struct irq_domain *d, unsigned int irq,
++ irq_hw_number_t hw)
++{
++ struct falcon_gpio_port *port = d->host_data;
++
++ irq_set_chip_and_handler_name(irq, &falcon_gpio_irq_chip,
++ handle_simple_irq, "mux");
++ irq_set_chip_data(irq, port);
++
++ /* set to negative logic (falling edge, low level) */
++ port_w32_mask(port, 0, 1 << hw, GPIO_EXINTCR0);
++ return 0;
++}
++
++static struct irq_chip falcon_gpio_irq_chip = {
++ .name = "gpio_irq_mux",
++ .irq_mask = falcon_gpio_disable_irq,
++ .irq_unmask = falcon_gpio_enable_irq,
++ .irq_ack = falcon_gpio_ack_irq,
++ .irq_mask_ack = falcon_gpio_mask_and_ack_irq,
++ .irq_set_type = falcon_gpio_irq_type,
++};
++
++static const struct irq_domain_ops irq_domain_ops = {
++ .xlate = irq_domain_xlate_onetwocell,
++ .map = falcon_gpio_irq_map,
++};
++
++static struct irqaction gpio_cascade = {
++ .handler = no_action,
++ .flags = IRQF_DISABLED,
++ .name = "gpio_cascade",
++};
++
++static int falcon_gpio_probe(struct platform_device *pdev)
++{
++ struct pinctrl_gpio_range *gpio_range;
++ struct device_node *node = pdev->dev.of_node;
++ const __be32 *bank = of_get_property(node, "lantiq,bank", NULL);
++ struct falcon_gpio_port *gpio_port;
++ struct resource *gpiores, irqres;
++ int ret, size;
++
++ if (!bank || *bank >= MAX_BANKS)
++ return -ENODEV;
++
++ size = pinctrl_falcon_get_range_size(*bank);
++ if (size < 1) {
++ dev_err(&pdev->dev, "pad not loaded for bank %d\n", *bank);
++ return size;
++ }
++
++ gpio_range = devm_kzalloc(&pdev->dev, sizeof(struct pinctrl_gpio_range),
++ GFP_KERNEL);
++ if (!gpio_range)
++ return -ENOMEM;
++
++ gpio_port = devm_kzalloc(&pdev->dev, sizeof(struct falcon_gpio_port),
++ GFP_KERNEL);
++ if (!gpio_port)
++ return -ENOMEM;
++
++ snprintf(gpio_port->name, 6, "gpio%d", *bank);
++ gpio_port->gpio_chip.label = gpio_port->name;
++ gpio_port->gpio_chip.direction_input = falcon_gpio_direction_input;
++ gpio_port->gpio_chip.direction_output = falcon_gpio_direction_output;
++ gpio_port->gpio_chip.get = falcon_gpio_get;
++ gpio_port->gpio_chip.set = falcon_gpio_set;
++ gpio_port->gpio_chip.request = falcon_gpio_request;
++ gpio_port->gpio_chip.free = falcon_gpio_free;
++ gpio_port->gpio_chip.base = *bank * PINS_PER_PORT;
++ gpio_port->gpio_chip.ngpio = size;
++ gpio_port->gpio_chip.dev = &pdev->dev;
++
++ gpiores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ gpio_port->port = devm_request_and_ioremap(&pdev->dev, gpiores);
++ if (IS_ERR(gpio_port->port))
++ return PTR_ERR(gpio_port->port);
++
++ gpio_port->clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(gpio_port->clk))
++ return PTR_ERR(gpio_port->clk);
++ clk_activate(gpio_port->clk);
++
++ if (of_irq_to_resource_table(node, &irqres, 1) == 1) {
++ gpio_port->irq_base = INT_NUM_EXTRA_START + (32 * *bank);
++ gpio_port->gpio_chip.to_irq = falcon_gpio_to_irq;
++ gpio_port->chained_irq = irqres.start;
++ irq_domain_add_legacy(node, size, gpio_port->irq_base, 0,
++ &irq_domain_ops, gpio_port);
++ setup_irq(irqres.start, &gpio_cascade);
++ irq_set_handler_data(irqres.start, gpio_port);
++ irq_set_chained_handler(irqres.start, falcon_gpio_irq_handler);
++ }
++
++ ret = gpiochip_add(&gpio_port->gpio_chip);
++ if (ret)
++ return ret;
++
++ platform_set_drvdata(pdev, gpio_port);
++
++ gpio_range->name = "FALCON GPIO";
++ gpio_range->id = *bank;
++ gpio_range->base = gpio_port->gpio_chip.base;
++ gpio_range->pin_base = gpio_port->gpio_chip.base;
++ gpio_range->npins = gpio_port->gpio_chip.ngpio;
++ gpio_range->gc = &gpio_port->gpio_chip;
++
++ pinctrl_falcon_add_gpio_range(gpio_range);
++
++ return 0;
++}
++
++static const struct of_device_id falcon_gpio_match[] = {
++ { .compatible = "lantiq,falcon-gpio" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, falcon_gpio_match);
++
++static struct platform_driver falcon_gpio_driver = {
++ .probe = falcon_gpio_probe,
++ .driver = {
++ .name = "gpio-falcon",
++ .owner = THIS_MODULE,
++ .of_match_table = falcon_gpio_match,
++ },
++};
++
++int __init falcon_gpio_init(void)
++{
++ int ret;
++
++ pr_info("FALC(tm) ON GPIO Driver, (C) 2012 Lantiq Deutschland Gmbh\n");
++ ret = platform_driver_register(&falcon_gpio_driver);
++ if (ret)
++ pr_err("falcon_gpio: Error registering platform driver!");
++ return ret;
++}
++
++subsys_initcall(falcon_gpio_init);
+--
+1.7.10.4
+
+++ /dev/null
-From 748c654a6ba890e9a1b5bd29d0f198ce6b2c091f Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 9 Aug 2013 18:47:27 +0200
-Subject: [PATCH 29/31] reset: Fix compile when reset RESET_CONTROLLER is not
- selected
-
-Drivers need to protect their reset api calls with #ifdef to avoid compile
-errors.
-
-This patch adds dummy wrappers in the same way that linux/of.h does it.
-
-Cc: linux-kernel@vger.kernel.org
-Cc: Philipp Zabel <p.zabel@pengutronix.de>
-Cc: Gabor Juhos <juhosg@openwrt.org>
----
- include/linux/reset-controller.h | 16 ++++++++++++++
- include/linux/reset.h | 43 ++++++++++++++++++++++++++++++++++++++
- 2 files changed, 59 insertions(+)
-
-diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h
-index 41a4695..f38f530 100644
---- a/include/linux/reset-controller.h
-+++ b/include/linux/reset-controller.h
-@@ -46,7 +46,23 @@ struct reset_controller_dev {
- unsigned int nr_resets;
- };
-
-+#if defined(CONFIG_RESET_CONTROLLER)
-+
- int reset_controller_register(struct reset_controller_dev *rcdev);
- void reset_controller_unregister(struct reset_controller_dev *rcdev);
-
-+#else
-+
-+static inline int reset_controller_register(struct reset_controller_dev *rcdev)
-+{
-+ return -ENOSYS;
-+}
-+
-+void reset_controller_unregister(struct reset_controller_dev *rcdev)
-+{
-+
-+}
-+
-+#endif
-+
- #endif
-diff --git a/include/linux/reset.h b/include/linux/reset.h
-index 6082247..1b36c9e 100644
---- a/include/linux/reset.h
-+++ b/include/linux/reset.h
-@@ -1,9 +1,13 @@
- #ifndef _LINUX_RESET_H_
- #define _LINUX_RESET_H_
-
-+#include <linux/err.h>
-+
- struct device;
- struct reset_control;
-
-+#if defined(CONFIG_RESET_CONTROLLER)
-+
- int reset_control_reset(struct reset_control *rstc);
- int reset_control_assert(struct reset_control *rstc);
- int reset_control_deassert(struct reset_control *rstc);
-@@ -14,4 +18,43 @@ struct reset_control *devm_reset_control_get(struct device *dev, const char *id)
-
- int device_reset(struct device *dev);
-
-+#else /* CONFIG_RESET_CONTROLLER */
-+
-+static inline int reset_control_reset(struct reset_control *rstc)
-+{
-+ return -ENOSYS;
-+}
-+
-+static inline int reset_control_assert(struct reset_control *rstc)
-+{
-+ return -ENOSYS;
-+}
-+
-+static inline int reset_control_deassert(struct reset_control *rstc)
-+{
-+ return -ENOSYS;
-+}
-+
-+static inline struct reset_control *reset_control_get(struct device *dev, const char *id)
-+{
-+ return ERR_PTR(-ENOSYS);
-+}
-+
-+static inline void reset_control_put(struct reset_control *rstc)
-+{
-+
-+}
-+
-+static inline struct reset_control *devm_reset_control_get(struct device *dev, const char *id)
-+{
-+ return ERR_PTR(-ENOSYS);
-+}
-+
-+static inline int device_reset(struct device *dev)
-+{
-+ return -ENOSYS;
-+}
-+
-+#endif
-+
- #endif
---
-1.7.10.4
-
--- /dev/null
+From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 12 Aug 2014 20:49:27 +0200
+Subject: [PATCH 30/36] GPIO: add named gpio exports
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
+ drivers/gpio/gpiolib.c | 11 +++++--
+ include/asm-generic/gpio.h | 5 +++
+ include/linux/gpio/consumer.h | 8 +++++
+ 4 files changed, 90 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
+index e0a98f5..f16f271 100644
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
+@@ -21,6 +21,8 @@
+ #include <linux/of_gpio.h>
+ #include <linux/pinctrl/pinctrl.h>
+ #include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
+
+ struct gpio_desc;
+
+@@ -296,3 +298,69 @@ void of_gpiochip_remove(struct gpio_chip *chip)
+ if (chip->of_node)
+ of_node_put(chip->of_node);
+ }
++
++static struct of_device_id gpio_export_ids[] = {
++ { .compatible = "gpio-export" },
++ { /* sentinel */ }
++};
++
++static int __init of_gpio_export_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct device_node *cnp;
++ u32 val;
++ int nb = 0;
++
++ for_each_child_of_node(np, cnp) {
++ const char *name = NULL;
++ int gpio;
++ bool dmc;
++ int max_gpio = 1;
++ int i;
++
++ of_property_read_string(cnp, "gpio-export,name", &name);
++
++ if (!name)
++ max_gpio = of_gpio_count(cnp);
++
++ for (i = 0; i < max_gpio; i++) {
++ unsigned flags = 0;
++ enum of_gpio_flags of_flags;
++
++ gpio = of_get_gpio_flags(cnp, i, &of_flags);
++
++ if (of_flags == OF_GPIO_ACTIVE_LOW)
++ flags |= GPIOF_ACTIVE_LOW;
++
++ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
++ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
++ else
++ flags |= GPIOF_IN;
++
++ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
++ continue;
++
++ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
++ gpio_export_with_name(gpio, dmc, name);
++ nb++;
++ }
++ }
++
++ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
++
++ return 0;
++}
++
++static struct platform_driver gpio_export_driver = {
++ .driver = {
++ .name = "gpio-export",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(gpio_export_ids),
++ },
++};
++
++static int __init of_gpio_export_init(void)
++{
++ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
++}
++device_initcall(of_gpio_export_init);
+diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
+index 50c4922..aece9f1 100644
+--- a/drivers/gpio/gpiolib.c
++++ b/drivers/gpio/gpiolib.c
+@@ -803,7 +803,7 @@ static struct class gpio_class = {
+ *
+ * Returns zero on success, else an error.
+ */
+-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
+ {
+ unsigned long flags;
+ int status;
+@@ -843,7 +843,8 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
+ offset = gpio_chip_hwgpio(desc);
+ if (desc->chip->names && desc->chip->names[offset])
+ ioname = desc->chip->names[offset];
+-
++ if (name)
++ ioname = name;
+ dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
+ desc, ioname ? ioname : "gpio%u",
+ desc_to_gpio(desc));
+@@ -880,6 +881,12 @@ fail_unlock:
+ gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+ return status;
+ }
++EXPORT_SYMBOL_GPL(_gpiod_export);
++
++int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++{
++ return _gpiod_export(desc, direction_may_change, NULL);
++}
+ EXPORT_SYMBOL_GPL(gpiod_export);
+
+ static int match_export(struct device *dev, const void *data)
+diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
+index a5f56a0..70a32ee 100644
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -126,6 +126,11 @@ static inline int gpio_export(unsigned gpio, bool direction_may_change)
+ return gpiod_export(gpio_to_desc(gpio), direction_may_change);
+ }
+
++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
++{
++ return _gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
++}
++
+ static inline int gpio_export_link(struct device *dev, const char *name,
+ unsigned gpio)
+ {
+diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
+index 7a8144f..085c31c 100644
+--- a/include/linux/gpio/consumer.h
++++ b/include/linux/gpio/consumer.h
+@@ -219,6 +219,7 @@ static inline struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
+
+ #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
+
++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
+ int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+ int gpiod_export_link(struct device *dev, const char *name,
+ struct gpio_desc *desc);
+@@ -227,6 +228,13 @@ void gpiod_unexport(struct gpio_desc *desc);
+
+ #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
+
++static inline int _gpiod_export(struct gpio_desc *desc,
++ bool direction_may_change,
++ const char *name)
++{
++ return -ENOSYS;
++}
++
+ static inline int gpiod_export(struct gpio_desc *desc,
+ bool direction_may_change)
+ {
+--
+1.7.10.4
+
+++ /dev/null
-From 015e22a637fe6ab9f9d2d94d3be1b0b312d21b39 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 21:40:41 +0200
-Subject: [PATCH 30/31] MIPS: lantiq: command line work around
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/prom.c | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
-index 202e118..227feed 100644
---- a/arch/mips/lantiq/prom.c
-+++ b/arch/mips/lantiq/prom.c
-@@ -74,6 +74,8 @@ void __init plat_mem_setup(void)
- * parsed resulting in our memory appearing
- */
- __dt_setup_arch(&__image_dtb);
-+
-+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
- }
-
- void __init device_tree_init(void)
---
-1.7.10.4
-
+++ /dev/null
-From 6774a8fcd63da9511faa7501ee20c4dde289bb07 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 31/31] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib.c | 11 +++++--
- include/asm-generic/gpio.h | 5 +++
- include/linux/gpio/consumer.h | 8 +++++
- 4 files changed, 90 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
-index e0a98f5..f16f271 100644
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -21,6 +21,8 @@
- #include <linux/of_gpio.h>
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-
- struct gpio_desc;
-
-@@ -296,3 +298,69 @@ void of_gpiochip_remove(struct gpio_chip *chip)
- if (chip->of_node)
- of_node_put(chip->of_node);
- }
-+
-+static struct of_device_id gpio_export_ids[] = {
-+ { .compatible = "gpio-export" },
-+ { /* sentinel */ }
-+};
-+
-+static int __init of_gpio_export_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device_node *cnp;
-+ u32 val;
-+ int nb = 0;
-+
-+ for_each_child_of_node(np, cnp) {
-+ const char *name = NULL;
-+ int gpio;
-+ bool dmc;
-+ int max_gpio = 1;
-+ int i;
-+
-+ of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+ if (!name)
-+ max_gpio = of_gpio_count(cnp);
-+
-+ for (i = 0; i < max_gpio; i++) {
-+ unsigned flags = 0;
-+ enum of_gpio_flags of_flags;
-+
-+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+
-+ if (of_flags == OF_GPIO_ACTIVE_LOW)
-+ flags |= GPIOF_ACTIVE_LOW;
-+
-+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+ else
-+ flags |= GPIOF_IN;
-+
-+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+ continue;
-+
-+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+ gpio_export_with_name(gpio, dmc, name);
-+ nb++;
-+ }
-+ }
-+
-+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+ .driver = {
-+ .name = "gpio-export",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(gpio_export_ids),
-+ },
-+};
-+
-+static int __init of_gpio_export_init(void)
-+{
-+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
-+}
-+device_initcall(of_gpio_export_init);
-diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
-index 50c4922..aece9f1 100644
---- a/drivers/gpio/gpiolib.c
-+++ b/drivers/gpio/gpiolib.c
-@@ -803,7 +803,7 @@ static struct class gpio_class = {
- *
- * Returns zero on success, else an error.
- */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- unsigned long flags;
- int status;
-@@ -843,7 +843,8 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
- offset = gpio_chip_hwgpio(desc);
- if (desc->chip->names && desc->chip->names[offset])
- ioname = desc->chip->names[offset];
--
-+ if (name)
-+ ioname = name;
- dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
- desc, ioname ? ioname : "gpio%u",
- desc_to_gpio(desc));
-@@ -880,6 +881,12 @@ fail_unlock:
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- return status;
- }
-+EXPORT_SYMBOL_GPL(_gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+ return _gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
-
- static int match_export(struct device *dev, const void *data)
-diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
-index a5f56a0..70a32ee 100644
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -126,6 +126,11 @@ static inline int gpio_export(unsigned gpio, bool direction_may_change)
- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
-
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+ return _gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
- {
-diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
-index 7a8144f..085c31c 100644
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -219,6 +219,7 @@ static inline struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
-
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
-
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc);
-@@ -227,6 +228,13 @@ void gpiod_unexport(struct gpio_desc *desc);
-
- #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
-
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+ bool direction_may_change,
-+ const char *name)
-+{
-+ return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- bool direction_may_change)
- {
---
-1.7.10.4
-
--- /dev/null
+From f17e50f67fa3c77624edf2ca03fae0d50f0ce39b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 7 Aug 2014 18:26:42 +0200
+Subject: [PATCH 31/36] I2C: MIPS: lantiq: add FALC-ON i2c bus master
+
+This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/i2c/busses/Kconfig | 10 +
+ drivers/i2c/busses/Makefile | 1 +
+ drivers/i2c/busses/i2c-lantiq.c | 747 +++++++++++++++++++++++++++++++++++++++
+ drivers/i2c/busses/i2c-lantiq.h | 234 ++++++++++++
+ 4 files changed, 992 insertions(+)
+ create mode 100644 drivers/i2c/busses/i2c-lantiq.c
+ create mode 100644 drivers/i2c/busses/i2c-lantiq.h
+
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index de17c55..3e003c4 100644
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -514,6 +514,16 @@ config I2C_KEMPLD
+ This driver can also be built as a module. If so, the module
+ will be called i2c-kempld.
+
++config I2C_LANTIQ
++ tristate "Lantiq I2C interface"
++ depends on LANTIQ && SOC_FALCON
++ help
++ If you say yes to this option, support will be included for the
++ Lantiq I2C core.
++
++ This driver can also be built as a module. If so, the module
++ will be called i2c-lantiq.
++
+ config I2C_MPC
+ tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
+ depends on PPC
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index a08931f..4417097 100644
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -49,6 +49,7 @@ obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
+ obj-$(CONFIG_I2C_IMX) += i2c-imx.o
+ obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
+ obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
++obj-$(CONFIG_I2C_LANTIQ) += i2c-lantiq.o
+ obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
+ obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
+ obj-$(CONFIG_I2C_MXS) += i2c-mxs.o
+diff --git a/drivers/i2c/busses/i2c-lantiq.c b/drivers/i2c/busses/i2c-lantiq.c
+new file mode 100644
+index 0000000..9a5f58b
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-lantiq.c
+@@ -0,0 +1,747 @@
++
++/*
++ * Lantiq I2C bus adapter
++ *
++ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/slab.h> /* for kzalloc, kfree */
++#include <linux/i2c.h>
++#include <linux/errno.h>
++#include <linux/completion.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/of_irq.h>
++#include <linux/of_i2c.h>
++
++#include <lantiq_soc.h>
++#include "i2c-lantiq.h"
++
++/*
++ * CURRENT ISSUES:
++ * - no high speed support
++ * - ten bit mode is not tested (no slave devices)
++ */
++
++/* access macros */
++#define i2c_r32(reg) \
++ __raw_readl(&(priv->membase)->reg)
++#define i2c_w32(val, reg) \
++ __raw_writel(val, &(priv->membase)->reg)
++#define i2c_w32_mask(clear, set, reg) \
++ i2c_w32((i2c_r32(reg) & ~(clear)) | (set), reg)
++
++#define DRV_NAME "i2c-lantiq"
++#define DRV_VERSION "1.00"
++
++#define LTQ_I2C_BUSY_TIMEOUT 20 /* ms */
++
++#ifdef DEBUG
++#define LTQ_I2C_XFER_TIMEOUT (25*HZ)
++#else
++#define LTQ_I2C_XFER_TIMEOUT HZ
++#endif
++
++#define LTQ_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \
++ I2C_IMSC_I2C_ERR_INT_EN)
++
++#define LTQ_I2C_ARB_LOST (1 << 0)
++#define LTQ_I2C_NACK (1 << 1)
++#define LTQ_I2C_RX_UFL (1 << 2)
++#define LTQ_I2C_RX_OFL (1 << 3)
++#define LTQ_I2C_TX_UFL (1 << 4)
++#define LTQ_I2C_TX_OFL (1 << 5)
++
++struct ltq_i2c {
++ struct mutex mutex;
++
++
++ /* active clock settings */
++ unsigned int input_clock; /* clock input for i2c hardware block */
++ unsigned int i2c_clock; /* approximated bus clock in kHz */
++
++ struct clk *clk_gate;
++ struct clk *clk_input;
++
++
++ /* resources (memory and interrupts) */
++ int irq_lb; /* last burst irq */
++
++ struct lantiq_reg_i2c __iomem *membase; /* base of mapped registers */
++
++ struct i2c_adapter adap;
++ struct device *dev;
++
++ struct completion cmd_complete;
++
++
++ /* message transfer data */
++ struct i2c_msg *current_msg; /* current message */
++ int msgs_num; /* number of messages to handle */
++ u8 *msg_buf; /* current buffer */
++ u32 msg_buf_len; /* remaining length of current buffer */
++ int msg_err; /* error status of the current transfer */
++
++
++ /* master status codes */
++ enum {
++ STATUS_IDLE,
++ STATUS_ADDR, /* address phase */
++ STATUS_WRITE,
++ STATUS_READ,
++ STATUS_READ_END,
++ STATUS_STOP
++ } status;
++};
++
++static irqreturn_t ltq_i2c_isr(int irq, void *dev_id);
++
++static inline void enable_burst_irq(struct ltq_i2c *priv)
++{
++ i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
++}
++static inline void disable_burst_irq(struct ltq_i2c *priv)
++{
++ i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
++}
++
++static void prepare_msg_send_addr(struct ltq_i2c *priv)
++{
++ struct i2c_msg *msg = priv->current_msg;
++ int rd = !!(msg->flags & I2C_M_RD); /* extends to 0 or 1 */
++ u16 addr = msg->addr;
++
++ /* new i2c_msg */
++ priv->msg_buf = msg->buf;
++ priv->msg_buf_len = msg->len;
++ if (rd)
++ priv->status = STATUS_READ;
++ else
++ priv->status = STATUS_WRITE;
++
++ /* send slave address */
++ if (msg->flags & I2C_M_TEN) {
++ i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd);
++ i2c_w32(addr & 0xff, txd);
++ } else {
++ i2c_w32((addr & 0x7f) << 1 | rd, txd);
++ }
++}
++
++static void ltq_i2c_set_tx_len(struct ltq_i2c *priv)
++{
++ struct i2c_msg *msg = priv->current_msg;
++ int len = (msg->flags & I2C_M_TEN) ? 2 : 1;
++
++ pr_debug("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? 'R' : 'T');
++
++ priv->status = STATUS_ADDR;
++
++ if (!(msg->flags & I2C_M_RD))
++ len += msg->len;
++ else
++ /* set maximum received packet size (before rx int!) */
++ i2c_w32(msg->len, mrps_ctrl);
++ i2c_w32(len, tps_ctrl);
++ enable_burst_irq(priv);
++}
++
++static int ltq_i2c_hw_set_clock(struct i2c_adapter *adap)
++{
++ struct ltq_i2c *priv = i2c_get_adapdata(adap);
++ unsigned int input_clock = clk_get_rate(priv->clk_input);
++ u32 dec, inc = 1;
++
++ /* clock changed? */
++ if (priv->input_clock == input_clock)
++ return 0;
++
++ /*
++ * this formula is only an approximation, found by the recommended
++ * values in the "I2C Architecture Specification 1.7.1"
++ */
++ dec = input_clock / (priv->i2c_clock * 2);
++ if (dec <= 6)
++ return -ENXIO;
++
++ i2c_w32(0, fdiv_high_cfg);
++ i2c_w32((inc << I2C_FDIV_CFG_INC_OFFSET) |
++ (dec << I2C_FDIV_CFG_DEC_OFFSET),
++ fdiv_cfg);
++
++ dev_info(priv->dev, "setup clocks (in %d kHz, bus %d kHz, dec=%d)\n",
++ input_clock, priv->i2c_clock, dec);
++
++ priv->input_clock = input_clock;
++ return 0;
++}
++
++static int ltq_i2c_hw_init(struct i2c_adapter *adap)
++{
++ int ret = 0;
++ struct ltq_i2c *priv = i2c_get_adapdata(adap);
++
++ /* disable bus */
++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++#ifndef DEBUG
++ /* set normal operation clock divider */
++ i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
++#else
++ /* for debugging a higher divider value! */
++ i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc);
++#endif
++
++ /* setup clock */
++ ret = ltq_i2c_hw_set_clock(adap);
++ if (ret != 0) {
++ dev_warn(priv->dev, "invalid clock settings\n");
++ return ret;
++ }
++
++ /* configure fifo */
++ i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */
++ I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */
++ I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */
++ I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */
++ I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */
++ I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */
++ fifo_cfg);
++
++ /* configure address */
++ i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data in
++ the fifo */
++ I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */
++ I2C_ADDR_CFG_MnS_EN | /* we are master device */
++ 0, /* our slave address (not used!) */
++ addr_cfg);
++
++ /* enable bus */
++ i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
++
++ return 0;
++}
++
++static int ltq_i2c_wait_bus_not_busy(struct ltq_i2c *priv)
++{
++ unsigned long timeout;
++
++ timeout = jiffies + msecs_to_jiffies(LTQ_I2C_BUSY_TIMEOUT);
++
++ do {
++ u32 stat = i2c_r32(bus_stat);
++
++ if ((stat & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_FREE)
++ return 0;
++
++ cond_resched();
++ } while (!time_after_eq(jiffies, timeout));
++
++ dev_err(priv->dev, "timeout waiting for bus ready\n");
++ return -ETIMEDOUT;
++}
++
++static void ltq_i2c_tx(struct ltq_i2c *priv, int last)
++{
++ if (priv->msg_buf_len && priv->msg_buf) {
++ i2c_w32(*priv->msg_buf, txd);
++
++ if (--priv->msg_buf_len)
++ priv->msg_buf++;
++ else
++ priv->msg_buf = NULL;
++ } else {
++ last = 1;
++ }
++
++ if (last)
++ disable_burst_irq(priv);
++}
++
++static void ltq_i2c_rx(struct ltq_i2c *priv, int last)
++{
++ u32 fifo_stat, timeout;
++ if (priv->msg_buf_len && priv->msg_buf) {
++ timeout = 5000000;
++ do {
++ fifo_stat = i2c_r32(ffs_stat);
++ } while (!fifo_stat && --timeout);
++ if (!timeout) {
++ last = 1;
++ pr_debug("\nrx timeout\n");
++ goto err;
++ }
++ while (fifo_stat) {
++ *priv->msg_buf = i2c_r32(rxd);
++ if (--priv->msg_buf_len) {
++ priv->msg_buf++;
++ } else {
++ priv->msg_buf = NULL;
++ last = 1;
++ break;
++ }
++ /*
++ * do not read more than burst size, otherwise no "last
++ * burst" is generated and the transaction is blocked!
++ */
++ fifo_stat = 0;
++ }
++ } else {
++ last = 1;
++ }
++err:
++ if (last) {
++ disable_burst_irq(priv);
++
++ if (priv->status == STATUS_READ_END) {
++ /*
++ * do the STATUS_STOP and complete() here, as sometimes
++ * the tx_end is already seen before this is finished
++ */
++ priv->status = STATUS_STOP;
++ complete(&priv->cmd_complete);
++ } else {
++ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
++ priv->status = STATUS_READ_END;
++ }
++ }
++}
++
++static void ltq_i2c_xfer_init(struct ltq_i2c *priv)
++{
++ /* enable interrupts */
++ i2c_w32(LTQ_I2C_IMSC_DEFAULT_MASK, imsc);
++
++ /* trigger transfer of first msg */
++ ltq_i2c_set_tx_len(priv);
++}
++
++static void dump_msgs(struct i2c_msg msgs[], int num, int rx)
++{
++#if defined(DEBUG)
++ int i, j;
++ pr_debug("Messages %d %s\n", num, rx ? "out" : "in");
++ for (i = 0; i < num; i++) {
++ pr_debug("%2d %cX Msg(%d) addr=0x%X: ", i,
++ (msgs[i].flags & I2C_M_RD) ? 'R' : 'T',
++ msgs[i].len, msgs[i].addr);
++ if (!(msgs[i].flags & I2C_M_RD) || rx) {
++ for (j = 0; j < msgs[i].len; j++)
++ pr_debug("%02X ", msgs[i].buf[j]);
++ }
++ pr_debug("\n");
++ }
++#endif
++}
++
++static void ltq_i2c_release_bus(struct ltq_i2c *priv)
++{
++ if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM)
++ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
++}
++
++static int ltq_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
++ int num)
++{
++ struct ltq_i2c *priv = i2c_get_adapdata(adap);
++ int ret;
++
++ dev_dbg(priv->dev, "xfer %u messages\n", num);
++ dump_msgs(msgs, num, 0);
++
++ mutex_lock(&priv->mutex);
++
++ INIT_COMPLETION(priv->cmd_complete);
++ priv->current_msg = msgs;
++ priv->msgs_num = num;
++ priv->msg_err = 0;
++ priv->status = STATUS_IDLE;
++
++ /* wait for the bus to become ready */
++ ret = ltq_i2c_wait_bus_not_busy(priv);
++ if (ret)
++ goto done;
++
++ while (priv->msgs_num) {
++ /* start the transfers */
++ ltq_i2c_xfer_init(priv);
++
++ /* wait for transfers to complete */
++ ret = wait_for_completion_interruptible_timeout(
++ &priv->cmd_complete, LTQ_I2C_XFER_TIMEOUT);
++ if (ret == 0) {
++ dev_err(priv->dev, "controller timed out\n");
++ ltq_i2c_hw_init(adap);
++ ret = -ETIMEDOUT;
++ goto done;
++ } else if (ret < 0)
++ goto done;
++
++ if (priv->msg_err) {
++ if (priv->msg_err & LTQ_I2C_NACK)
++ ret = -ENXIO;
++ else
++ ret = -EREMOTEIO;
++ goto done;
++ }
++ if (--priv->msgs_num)
++ priv->current_msg++;
++ }
++ /* no error? */
++ ret = num;
++
++done:
++ ltq_i2c_release_bus(priv);
++
++ mutex_unlock(&priv->mutex);
++
++ if (ret >= 0)
++ dump_msgs(msgs, num, 1);
++
++ pr_debug("XFER ret %d\n", ret);
++ return ret;
++}
++
++static irqreturn_t ltq_i2c_isr_burst(int irq, void *dev_id)
++{
++ struct ltq_i2c *priv = dev_id;
++ struct i2c_msg *msg = priv->current_msg;
++ int last = (irq == priv->irq_lb);
++
++ if (last)
++ pr_debug("LB ");
++ else
++ pr_debug("B ");
++
++ if (msg->flags & I2C_M_RD) {
++ switch (priv->status) {
++ case STATUS_ADDR:
++ pr_debug("X");
++ prepare_msg_send_addr(priv);
++ disable_burst_irq(priv);
++ break;
++ case STATUS_READ:
++ case STATUS_READ_END:
++ pr_debug("R");
++ ltq_i2c_rx(priv, last);
++ break;
++ default:
++ disable_burst_irq(priv);
++ pr_warn("Status R %d\n", priv->status);
++ break;
++ }
++ } else {
++ switch (priv->status) {
++ case STATUS_ADDR:
++ pr_debug("x");
++ prepare_msg_send_addr(priv);
++ break;
++ case STATUS_WRITE:
++ pr_debug("w");
++ ltq_i2c_tx(priv, last);
++ break;
++ default:
++ disable_burst_irq(priv);
++ pr_warn("Status W %d\n", priv->status);
++ break;
++ }
++ }
++
++ i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr);
++ return IRQ_HANDLED;
++}
++
++static void ltq_i2c_isr_prot(struct ltq_i2c *priv)
++{
++ u32 i_pro = i2c_r32(p_irqss);
++
++ pr_debug("i2c-p");
++
++ /* not acknowledge */
++ if (i_pro & I2C_P_IRQSS_NACK) {
++ priv->msg_err |= LTQ_I2C_NACK;
++ pr_debug(" nack");
++ }
++
++ /* arbitration lost */
++ if (i_pro & I2C_P_IRQSS_AL) {
++ priv->msg_err |= LTQ_I2C_ARB_LOST;
++ pr_debug(" arb-lost");
++ }
++ /* tx -> rx switch */
++ if (i_pro & I2C_P_IRQSS_RX)
++ pr_debug(" rx");
++
++ /* tx end */
++ if (i_pro & I2C_P_IRQSS_TX_END)
++ pr_debug(" txend");
++ pr_debug("\n");
++
++ if (!priv->msg_err) {
++ /* tx -> rx switch */
++ if (i_pro & I2C_P_IRQSS_RX) {
++ priv->status = STATUS_READ;
++ enable_burst_irq(priv);
++ }
++ if (i_pro & I2C_P_IRQSS_TX_END) {
++ if (priv->status == STATUS_READ)
++ priv->status = STATUS_READ_END;
++ else {
++ disable_burst_irq(priv);
++ priv->status = STATUS_STOP;
++ }
++ }
++ }
++
++ i2c_w32(i_pro, p_irqsc);
++}
++
++static irqreturn_t ltq_i2c_isr(int irq, void *dev_id)
++{
++ u32 i_raw, i_err = 0;
++ struct ltq_i2c *priv = dev_id;
++
++ i_raw = i2c_r32(mis);
++ pr_debug("i_raw 0x%08X\n", i_raw);
++
++ /* error interrupt */
++ if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
++ i_err = i2c_r32(err_irqss);
++ pr_debug("i_err 0x%08X bus_stat 0x%04X\n",
++ i_err, i2c_r32(bus_stat));
++
++ /* tx fifo overflow (8) */
++ if (i_err & I2C_ERR_IRQSS_TXF_OFL)
++ priv->msg_err |= LTQ_I2C_TX_OFL;
++
++ /* tx fifo underflow (4) */
++ if (i_err & I2C_ERR_IRQSS_TXF_UFL)
++ priv->msg_err |= LTQ_I2C_TX_UFL;
++
++ /* rx fifo overflow (2) */
++ if (i_err & I2C_ERR_IRQSS_RXF_OFL)
++ priv->msg_err |= LTQ_I2C_RX_OFL;
++
++ /* rx fifo underflow (1) */
++ if (i_err & I2C_ERR_IRQSS_RXF_UFL)
++ priv->msg_err |= LTQ_I2C_RX_UFL;
++
++ i2c_w32(i_err, err_irqsc);
++ }
++
++ /* protocol interrupt */
++ if (i_raw & I2C_RIS_I2C_P_INT_INTOCC)
++ ltq_i2c_isr_prot(priv);
++
++ if ((priv->msg_err) || (priv->status == STATUS_STOP))
++ complete(&priv->cmd_complete);
++
++ return IRQ_HANDLED;
++}
++
++static u32 ltq_i2c_functionality(struct i2c_adapter *adap)
++{
++ return I2C_FUNC_I2C |
++ I2C_FUNC_10BIT_ADDR |
++ I2C_FUNC_SMBUS_EMUL;
++}
++
++static struct i2c_algorithm ltq_i2c_algorithm = {
++ .master_xfer = ltq_i2c_xfer,
++ .functionality = ltq_i2c_functionality,
++};
++
++static int __devinit ltq_i2c_probe(struct platform_device *pdev)
++{
++ struct device_node *node = pdev->dev.of_node;
++ struct ltq_i2c *priv;
++ struct i2c_adapter *adap;
++ struct resource *mmres, irqres[4];
++ int ret = 0;
++
++ dev_dbg(&pdev->dev, "probing\n");
++
++ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ ret = of_irq_to_resource_table(node, irqres, 4);
++ if (!mmres || (ret != 4)) {
++ dev_err(&pdev->dev, "no resources\n");
++ return -ENODEV;
++ }
++
++ /* allocate private data */
++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
++ if (!priv) {
++ dev_err(&pdev->dev, "can't allocate private data\n");
++ return -ENOMEM;
++ }
++
++ adap = &priv->adap;
++ i2c_set_adapdata(adap, priv);
++ adap->owner = THIS_MODULE;
++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
++ strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
++ adap->algo = <q_i2c_algorithm;
++
++ if (of_property_read_u32(node, "clock-frequency", &priv->i2c_clock)) {
++ dev_warn(&pdev->dev, "No I2C speed selected, using 100kHz\n");
++ priv->i2c_clock = 100000;
++ }
++
++ init_completion(&priv->cmd_complete);
++ mutex_init(&priv->mutex);
++
++ priv->membase = devm_request_and_ioremap(&pdev->dev, mmres);
++ if (priv->membase == NULL)
++ return -ENOMEM;
++
++ priv->dev = &pdev->dev;
++ priv->irq_lb = irqres[0].start;
++
++ ret = devm_request_irq(&pdev->dev, irqres[0].start, ltq_i2c_isr_burst,
++ IRQF_DISABLED, "i2c lb", priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get last burst IRQ %d\n",
++ irqres[0].start);
++ return -ENODEV;
++ }
++
++ ret = devm_request_irq(&pdev->dev, irqres[1].start, ltq_i2c_isr_burst,
++ IRQF_DISABLED, "i2c b", priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get burst IRQ %d\n",
++ irqres[1].start);
++ return -ENODEV;
++ }
++
++ ret = devm_request_irq(&pdev->dev, irqres[2].start, ltq_i2c_isr,
++ IRQF_DISABLED, "i2c err", priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get error IRQ %d\n",
++ irqres[2].start);
++ return -ENODEV;
++ }
++
++ ret = devm_request_irq(&pdev->dev, irqres[3].start, ltq_i2c_isr,
++ IRQF_DISABLED, "i2c p", priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get protocol IRQ %d\n",
++ irqres[3].start);
++ return -ENODEV;
++ }
++
++ dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
++ dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres[0].start,
++ irqres[1].start, irqres[2].start, irqres[3].start);
++
++ priv->clk_gate = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(priv->clk_gate)) {
++ dev_err(&pdev->dev, "failed to get i2c clk\n");
++ return -ENOENT;
++ }
++
++ /* this is a static clock, which has no refcounting */
++ priv->clk_input = clk_get_fpi();
++ if (IS_ERR(priv->clk_input)) {
++ dev_err(&pdev->dev, "failed to get fpi clk\n");
++ return -ENOENT;
++ }
++
++ clk_activate(priv->clk_gate);
++
++ /* add our adapter to the i2c stack */
++ ret = i2c_add_numbered_adapter(adap);
++ if (ret) {
++ dev_err(&pdev->dev, "can't register I2C adapter\n");
++ goto out;
++ }
++
++ platform_set_drvdata(pdev, priv);
++ i2c_set_adapdata(adap, priv);
++
++ /* print module version information */
++ dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
++ (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
++ (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
++
++ /* initialize HW */
++ ret = ltq_i2c_hw_init(adap);
++ if (ret) {
++ dev_err(&pdev->dev, "can't configure adapter\n");
++ i2c_del_adapter(adap);
++ platform_set_drvdata(pdev, NULL);
++ } else {
++ dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
++ }
++
++ of_i2c_register_devices(adap);
++
++out:
++ /* if init failed, we need to deactivate the clock gate */
++ if (ret)
++ clk_deactivate(priv->clk_gate);
++
++ return ret;
++}
++
++static int __devexit ltq_i2c_remove(struct platform_device *pdev)
++{
++ struct ltq_i2c *priv = platform_get_drvdata(pdev);
++
++ /* disable bus */
++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++ /* power down the core */
++ clk_deactivate(priv->clk_gate);
++
++ /* remove driver */
++ i2c_del_adapter(&priv->adap);
++ kfree(priv);
++
++ dev_dbg(&pdev->dev, "removed\n");
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++static const struct of_device_id ltq_i2c_match[] = {
++ { .compatible = "lantiq,lantiq-i2c" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ltq_i2c_match);
++
++static struct platform_driver ltq_i2c_driver = {
++ .probe = ltq_i2c_probe,
++ .remove = __devexit_p(ltq_i2c_remove),
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE,
++ .of_match_table = ltq_i2c_match,
++ },
++};
++
++module_platform_driver(ltq_i2c_driver);
++
++MODULE_DESCRIPTION("Lantiq I2C bus adapter");
++MODULE_AUTHOR("Thomas Langer <thomas.langer@lantiq.com>");
++MODULE_ALIAS("platform:" DRV_NAME);
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
+diff --git a/drivers/i2c/busses/i2c-lantiq.h b/drivers/i2c/busses/i2c-lantiq.h
+new file mode 100644
+index 0000000..7a86b89
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-lantiq.h
+@@ -0,0 +1,234 @@
++#ifndef I2C_LANTIQ_H
++#define I2C_LANTIQ_H
++
++/* I2C register structure */
++struct lantiq_reg_i2c {
++ /* I2C Kernel Clock Control Register */
++ unsigned int clc; /* 0x00000000 */
++ /* Reserved */
++ unsigned int res_0; /* 0x00000004 */
++ /* I2C Identification Register */
++ unsigned int id; /* 0x00000008 */
++ /* Reserved */
++ unsigned int res_1; /* 0x0000000C */
++ /*
++ * I2C RUN Control Register
++ * This register enables and disables the I2C peripheral. Before
++ * enabling, the I2C has to be configured properly. After enabling
++ * no configuration is possible
++ */
++ unsigned int run_ctrl; /* 0x00000010 */
++ /*
++ * I2C End Data Control Register
++ * This register is used to either turn around the data transmission
++ * direction or to address another slave without sending a stop
++ * condition. Also the software can stop the slave-transmitter by
++ * sending a not-accolade when working as master-receiver or even
++ * stop data transmission immediately when operating as
++ * master-transmitter. The writing to the bits of this control
++ * register is only effective when in MASTER RECEIVES BYTES, MASTER
++ * TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state
++ */
++ unsigned int endd_ctrl; /* 0x00000014 */
++ /*
++ * I2C Fractional Divider Configuration Register
++ * These register is used to program the fractional divider of the I2C
++ * bus. Before the peripheral is switched on by setting the RUN-bit the
++ * two (fixed) values for the two operating frequencies are programmed
++ * into these (configuration) registers. The Register FDIV_HIGH_CFG has
++ * the same layout as I2C_FDIV_CFG.
++ */
++ unsigned int fdiv_cfg; /* 0x00000018 */
++ /*
++ * I2C Fractional Divider (highspeed mode) Configuration Register
++ * These register is used to program the fractional divider of the I2C
++ * bus. Before the peripheral is switched on by setting the RUN-bit the
++ * two (fixed) values for the two operating frequencies are programmed
++ * into these (configuration) registers. The Register FDIV_CFG has the
++ * same layout as I2C_FDIV_CFG.
++ */
++ unsigned int fdiv_high_cfg; /* 0x0000001C */
++ /* I2C Address Configuration Register */
++ unsigned int addr_cfg; /* 0x00000020 */
++ /* I2C Bus Status Register
++ * This register gives a status information of the I2C. This additional
++ * information can be used by the software to start proper actions.
++ */
++ unsigned int bus_stat; /* 0x00000024 */
++ /* I2C FIFO Configuration Register */
++ unsigned int fifo_cfg; /* 0x00000028 */
++ /* I2C Maximum Received Packet Size Register */
++ unsigned int mrps_ctrl; /* 0x0000002C */
++ /* I2C Received Packet Size Status Register */
++ unsigned int rps_stat; /* 0x00000030 */
++ /* I2C Transmit Packet Size Register */
++ unsigned int tps_ctrl; /* 0x00000034 */
++ /* I2C Filled FIFO Stages Status Register */
++ unsigned int ffs_stat; /* 0x00000038 */
++ /* Reserved */
++ unsigned int res_2; /* 0x0000003C */
++ /* I2C Timing Configuration Register */
++ unsigned int tim_cfg; /* 0x00000040 */
++ /* Reserved */
++ unsigned int res_3[7]; /* 0x00000044 */
++ /* I2C Error Interrupt Request Source Mask Register */
++ unsigned int err_irqsm; /* 0x00000060 */
++ /* I2C Error Interrupt Request Source Status Register */
++ unsigned int err_irqss; /* 0x00000064 */
++ /* I2C Error Interrupt Request Source Clear Register */
++ unsigned int err_irqsc; /* 0x00000068 */
++ /* Reserved */
++ unsigned int res_4; /* 0x0000006C */
++ /* I2C Protocol Interrupt Request Source Mask Register */
++ unsigned int p_irqsm; /* 0x00000070 */
++ /* I2C Protocol Interrupt Request Source Status Register */
++ unsigned int p_irqss; /* 0x00000074 */
++ /* I2C Protocol Interrupt Request Source Clear Register */
++ unsigned int p_irqsc; /* 0x00000078 */
++ /* Reserved */
++ unsigned int res_5; /* 0x0000007C */
++ /* I2C Raw Interrupt Status Register */
++ unsigned int ris; /* 0x00000080 */
++ /* I2C Interrupt Mask Control Register */
++ unsigned int imsc; /* 0x00000084 */
++ /* I2C Masked Interrupt Status Register */
++ unsigned int mis; /* 0x00000088 */
++ /* I2C Interrupt Clear Register */
++ unsigned int icr; /* 0x0000008C */
++ /* I2C Interrupt Set Register */
++ unsigned int isr; /* 0x00000090 */
++ /* I2C DMA Enable Register */
++ unsigned int dmae; /* 0x00000094 */
++ /* Reserved */
++ unsigned int res_6[8154]; /* 0x00000098 */
++ /* I2C Transmit Data Register */
++ unsigned int txd; /* 0x00008000 */
++ /* Reserved */
++ unsigned int res_7[4095]; /* 0x00008004 */
++ /* I2C Receive Data Register */
++ unsigned int rxd; /* 0x0000C000 */
++ /* Reserved */
++ unsigned int res_8[4095]; /* 0x0000C004 */
++};
++
++/*
++ * Clock Divider for Normal Run Mode
++ * Max 8-bit divider value. IF RMC is 0 the module is disabled. Note: As long
++ * as the new divider value RMC is not valid, the register returns 0x0000 00xx
++ * on reading.
++ */
++#define I2C_CLC_RMC_MASK 0x0000FF00
++/* field offset */
++#define I2C_CLC_RMC_OFFSET 8
++
++/* Fields of "I2C Identification Register" */
++/* Module ID */
++#define I2C_ID_ID_MASK 0x0000FF00
++/* field offset */
++#define I2C_ID_ID_OFFSET 8
++/* Revision */
++#define I2C_ID_REV_MASK 0x000000FF
++/* field offset */
++#define I2C_ID_REV_OFFSET 0
++
++/* Fields of "I2C Interrupt Mask Control Register" */
++/* Enable */
++#define I2C_IMSC_BREQ_INT_EN 0x00000008
++/* Enable */
++#define I2C_IMSC_LBREQ_INT_EN 0x00000004
++
++/* Fields of "I2C Fractional Divider Configuration Register" */
++/* field offset */
++#define I2C_FDIV_CFG_INC_OFFSET 16
++
++/* Fields of "I2C Interrupt Mask Control Register" */
++/* Enable */
++#define I2C_IMSC_I2C_P_INT_EN 0x00000020
++/* Enable */
++#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010
++
++/* Fields of "I2C Error Interrupt Request Source Status Register" */
++/* TXF_OFL */
++#define I2C_ERR_IRQSS_TXF_OFL 0x00000008
++/* TXF_UFL */
++#define I2C_ERR_IRQSS_TXF_UFL 0x00000004
++/* RXF_OFL */
++#define I2C_ERR_IRQSS_RXF_OFL 0x00000002
++/* RXF_UFL */
++#define I2C_ERR_IRQSS_RXF_UFL 0x00000001
++
++/* Fields of "I2C Raw Interrupt Status Register" */
++/* Read: Interrupt occurred. */
++#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010
++/* Read: Interrupt occurred. */
++#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020
++
++/* Fields of "I2C FIFO Configuration Register" */
++/* TX FIFO Flow Control */
++#define I2C_FIFO_CFG_TXFC 0x00020000
++/* RX FIFO Flow Control */
++#define I2C_FIFO_CFG_RXFC 0x00010000
++/* Word aligned (character alignment of four characters) */
++#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000
++/* Word aligned (character alignment of four characters) */
++#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200
++/* 1 word */
++#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000
++
++/* Fields of "I2C FIFO Configuration Register" */
++/* 1 word */
++#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000
++/* Stop on Packet End Enable */
++#define I2C_ADDR_CFG_SOPE_EN 0x00200000
++/* Stop on Not Acknowledge Enable */
++#define I2C_ADDR_CFG_SONA_EN 0x00100000
++/* Enable */
++#define I2C_ADDR_CFG_MnS_EN 0x00080000
++
++/* Fields of "I2C Interrupt Clear Register" */
++/* Clear */
++#define I2C_ICR_BREQ_INT_CLR 0x00000008
++/* Clear */
++#define I2C_ICR_LBREQ_INT_CLR 0x00000004
++
++/* Fields of "I2C Fractional Divider Configuration Register" */
++/* field offset */
++#define I2C_FDIV_CFG_DEC_OFFSET 0
++
++/* Fields of "I2C Bus Status Register" */
++/* Bus Status */
++#define I2C_BUS_STAT_BS_MASK 0x00000003
++/* Read from I2C Bus. */
++#define I2C_BUS_STAT_RNW_READ 0x00000004
++/* I2C Bus is free. */
++#define I2C_BUS_STAT_BS_FREE 0x00000000
++/*
++ * The device is working as master and has claimed the control on the
++ * I2C-bus (busy master).
++ */
++#define I2C_BUS_STAT_BS_BM 0x00000002
++
++/* Fields of "I2C RUN Control Register" */
++/* Enable */
++#define I2C_RUN_CTRL_RUN_EN 0x00000001
++
++/* Fields of "I2C End Data Control Register" */
++/*
++ * Set End of Transmission
++ * Note:Do not write '1' to this bit when bus is free. This will cause an
++ * abort after the first byte when a new transfer is started.
++ */
++#define I2C_ENDD_CTRL_SETEND 0x00000002
++
++/* Fields of "I2C Protocol Interrupt Request Source Status Register" */
++/* NACK */
++#define I2C_P_IRQSS_NACK 0x00000010
++/* AL */
++#define I2C_P_IRQSS_AL 0x00000008
++/* RX */
++#define I2C_P_IRQSS_RX 0x00000040
++/* TX_END */
++#define I2C_P_IRQSS_TX_END 0x00000020
++
++
++#endif /* I2C_LANTIQ_H */
+--
+1.7.10.4
+
--- /dev/null
+From 326714a47233e4a524afa0c8398276fddf0dbd4d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 6 Dec 2012 19:59:53 +0100
+Subject: [PATCH 32/36] USB: fix roothub for IFXHCD
+
+---
+ arch/mips/lantiq/Kconfig | 1 +
+ drivers/usb/core/hub.c | 2 +-
+ 2 files changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
+index 1621b1d..4c9a241 100644
+--- a/arch/mips/lantiq/Kconfig
++++ b/arch/mips/lantiq/Kconfig
+@@ -3,6 +3,7 @@ if LANTIQ
+ config SOC_TYPE_XWAY
+ bool
+ select PINCTRL_XWAY
++ select USB_ARCH_HAS_HCD
+ default n
+
+ choice
+diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
+index 64ea219..30f4bdf 100644
+--- a/drivers/usb/core/hub.c
++++ b/drivers/usb/core/hub.c
+@@ -4077,7 +4077,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
+ udev->ttport = hdev->ttport;
+ } else if (udev->speed != USB_SPEED_HIGH
+ && hdev->speed == USB_SPEED_HIGH) {
+- if (!hub->tt.hub) {
++ if (hdev->parent && !hub->tt.hub) {
+ dev_err(&udev->dev, "parent hub has no TT\n");
+ retval = -EINVAL;
+ goto fail;
+--
+1.7.10.4
+
--- /dev/null
+From e75df4f96373e5d16f8ca13aa031e54cdcfeda62 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 13 Mar 2013 09:29:37 +0100
+Subject: [PATCH 33/36] SPI: MIPS: lantiq: adds spi-xway
+
+This patch adds support for the SPI core found on several Lantiq SoCs.
+The Driver has been runtime tested in combination with m25p80 Flash Devices
+on Amazon_SE and VR9.
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/spi/Kconfig | 8 +
+ drivers/spi/Makefile | 1 +
+ drivers/spi/spi-xway.c | 977 ++++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 986 insertions(+)
+ create mode 100644 drivers/spi/spi-xway.c
+
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index 581ee2a..b2cd93c 100644
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -527,6 +527,14 @@ config SPI_NUC900
+ help
+ SPI driver for Nuvoton NUC900 series ARM SoCs
+
++config SPI_XWAY
++ tristate "Lantiq XWAY SPI controller"
++ depends on LANTIQ && SOC_TYPE_XWAY
++ select SPI_BITBANG
++ help
++ This driver supports the Lantiq SoC SPI controller in master
++ mode.
++
+ #
+ # Add new SPI master controllers in alphabetical order above this line
+ #
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index 95af48d..82d3799 100644
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -79,3 +79,4 @@ obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
+ obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
+ obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
+ obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
++obj-$(CONFIG_SPI_XWAY) += spi-xway.o
+diff --git a/drivers/spi/spi-xway.c b/drivers/spi/spi-xway.c
+new file mode 100644
+index 0000000..61532e3
+--- /dev/null
++++ b/drivers/spi/spi-xway.c
+@@ -0,0 +1,977 @@
++/*
++ * Lantiq SoC SPI controller
++ *
++ * Copyright (C) 2011 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/sched.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/completion.h>
++#include <linux/spinlock.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/of_irq.h>
++
++#include <lantiq_soc.h>
++
++#define LTQ_SPI_CLC 0x00 /* Clock control */
++#define LTQ_SPI_PISEL 0x04 /* Port input select */
++#define LTQ_SPI_ID 0x08 /* Identification */
++#define LTQ_SPI_CON 0x10 /* Control */
++#define LTQ_SPI_STAT 0x14 /* Status */
++#define LTQ_SPI_WHBSTATE 0x18 /* Write HW modified state */
++#define LTQ_SPI_TB 0x20 /* Transmit buffer */
++#define LTQ_SPI_RB 0x24 /* Receive buffer */
++#define LTQ_SPI_RXFCON 0x30 /* Receive FIFO control */
++#define LTQ_SPI_TXFCON 0x34 /* Transmit FIFO control */
++#define LTQ_SPI_FSTAT 0x38 /* FIFO status */
++#define LTQ_SPI_BRT 0x40 /* Baudrate timer */
++#define LTQ_SPI_BRSTAT 0x44 /* Baudrate timer status */
++#define LTQ_SPI_SFCON 0x60 /* Serial frame control */
++#define LTQ_SPI_SFSTAT 0x64 /* Serial frame status */
++#define LTQ_SPI_GPOCON 0x70 /* General purpose output control */
++#define LTQ_SPI_GPOSTAT 0x74 /* General purpose output status */
++#define LTQ_SPI_FGPO 0x78 /* Forced general purpose output */
++#define LTQ_SPI_RXREQ 0x80 /* Receive request */
++#define LTQ_SPI_RXCNT 0x84 /* Receive count */
++#define LTQ_SPI_DMACON 0xEC /* DMA control */
++#define LTQ_SPI_IRNEN 0xF4 /* Interrupt node enable */
++#define LTQ_SPI_IRNICR 0xF8 /* Interrupt node interrupt capture */
++#define LTQ_SPI_IRNCR 0xFC /* Interrupt node control */
++
++#define LTQ_SPI_CLC_SMC_SHIFT 16 /* Clock divider for sleep mode */
++#define LTQ_SPI_CLC_SMC_MASK 0xFF
++#define LTQ_SPI_CLC_RMC_SHIFT 8 /* Clock divider for normal run mode */
++#define LTQ_SPI_CLC_RMC_MASK 0xFF
++#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */
++#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */
++
++#define LTQ_SPI_ID_TXFS_SHIFT 24 /* Implemented TX FIFO size */
++#define LTQ_SPI_ID_TXFS_MASK 0x3F
++#define LTQ_SPI_ID_RXFS_SHIFT 16 /* Implemented RX FIFO size */
++#define LTQ_SPI_ID_RXFS_MASK 0x3F
++#define LTQ_SPI_ID_REV_MASK 0x1F /* Hardware revision number */
++#define LTQ_SPI_ID_CFG BIT(5) /* DMA interface support */
++
++#define LTQ_SPI_CON_BM_SHIFT 16 /* Data width selection */
++#define LTQ_SPI_CON_BM_MASK 0x1F
++#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */
++#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */
++#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */
++#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
++#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
++#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */
++#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */
++#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
++#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */
++#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */
++#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */
++#define LTQ_SPI_CON_HB BIT(4) /* Heading control */
++#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */
++#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
++
++#define LTQ_SPI_STAT_RXBV_MASK 0x7
++#define LTQ_SPI_STAT_RXBV_SHIFT 28
++#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */
++#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
++#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
++#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */
++#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */
++#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */
++#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */
++#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */
++
++#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
++#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
++#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
++#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
++#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error
++ flag */
++#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
++#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
++#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
++#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
++#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
++#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
++#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
++#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
++#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
++#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
++#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
++#define LTQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50
++
++#define LTQ_SPI_RXFCON_RXFITL_SHIFT 8 /* FIFO interrupt trigger level */
++#define LTQ_SPI_RXFCON_RXFITL_MASK 0x3F
++#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
++#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
++
++#define LTQ_SPI_TXFCON_TXFITL_SHIFT 8 /* FIFO interrupt trigger level */
++#define LTQ_SPI_TXFCON_TXFITL_MASK 0x3F
++#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
++#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
++
++#define LTQ_SPI_FSTAT_RXFFL_MASK 0x3f
++#define LTQ_SPI_FSTAT_RXFFL_SHIFT 0
++#define LTQ_SPI_FSTAT_TXFFL_MASK 0x3f
++#define LTQ_SPI_FSTAT_TXFFL_SHIFT 8
++
++#define LTQ_SPI_GPOCON_ISCSBN_SHIFT 8
++#define LTQ_SPI_GPOCON_INVOUTN_SHIFT 0
++
++#define LTQ_SPI_FGPO_SETOUTN_SHIFT 8
++#define LTQ_SPI_FGPO_CLROUTN_SHIFT 0
++
++#define LTQ_SPI_RXREQ_RXCNT_MASK 0xFFFF /* Receive count value */
++#define LTQ_SPI_RXCNT_TODO_MASK 0xFFFF /* Recevie to-do value */
++
++#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
++#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */
++#define LTQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */
++#define LTQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */
++#define LTQ_SPI_IRNEN_ALL 0xF
++
++struct ltq_spi {
++ struct spi_bitbang bitbang;
++ struct completion done;
++ spinlock_t lock;
++
++ struct device *dev;
++ void __iomem *base;
++ struct clk *fpiclk;
++ struct clk *spiclk;
++
++ int status;
++ int irq[3];
++
++ const u8 *tx;
++ u8 *rx;
++ u32 tx_cnt;
++ u32 rx_cnt;
++ u32 len;
++ struct spi_transfer *curr_transfer;
++
++ u32 (*get_tx) (struct ltq_spi *);
++
++ u16 txfs;
++ u16 rxfs;
++ unsigned dma_support:1;
++ unsigned cfg_mode:1;
++};
++
++static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi)
++{
++ return spi_master_get_devdata(spi->master);
++}
++
++static inline u32 ltq_spi_reg_read(struct ltq_spi *hw, u32 reg)
++{
++ return ioread32be(hw->base + reg);
++}
++
++static inline void ltq_spi_reg_write(struct ltq_spi *hw, u32 val, u32 reg)
++{
++ iowrite32be(val, hw->base + reg);
++}
++
++static inline void ltq_spi_reg_setbit(struct ltq_spi *hw, u32 bits, u32 reg)
++{
++ u32 val;
++
++ val = ltq_spi_reg_read(hw, reg);
++ val |= bits;
++ ltq_spi_reg_write(hw, val, reg);
++}
++
++static inline void ltq_spi_reg_clearbit(struct ltq_spi *hw, u32 bits, u32 reg)
++{
++ u32 val;
++
++ val = ltq_spi_reg_read(hw, reg);
++ val &= ~bits;
++ ltq_spi_reg_write(hw, val, reg);
++}
++
++static void ltq_spi_hw_enable(struct ltq_spi *hw)
++{
++ u32 clc;
++
++ /* Power-up module */
++ clk_enable(hw->spiclk);
++
++ /*
++ * Set clock divider for run mode to 1 to
++ * run at same frequency as FPI bus
++ */
++ clc = (1 << LTQ_SPI_CLC_RMC_SHIFT);
++ ltq_spi_reg_write(hw, clc, LTQ_SPI_CLC);
++}
++
++static void ltq_spi_hw_disable(struct ltq_spi *hw)
++{
++ /* Set clock divider to 0 and set module disable bit */
++ ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC);
++
++ /* Power-down module */
++ clk_disable(hw->spiclk);
++}
++
++static void ltq_spi_reset_fifos(struct ltq_spi *hw)
++{
++ u32 val;
++
++ /*
++ * Enable and flush FIFOs. Set interrupt trigger level to
++ * half of FIFO count implemented in hardware.
++ */
++ if (hw->txfs > 1) {
++ val = hw->txfs << (LTQ_SPI_TXFCON_TXFITL_SHIFT - 1);
++ val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
++ ltq_spi_reg_write(hw, val, LTQ_SPI_TXFCON);
++ }
++
++ if (hw->rxfs > 1) {
++ val = hw->rxfs << (LTQ_SPI_RXFCON_RXFITL_SHIFT - 1);
++ val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
++ ltq_spi_reg_write(hw, val, LTQ_SPI_RXFCON);
++ }
++}
++
++static inline int ltq_spi_wait_ready(struct ltq_spi *hw)
++{
++ u32 stat;
++ unsigned long timeout;
++
++ timeout = jiffies + msecs_to_jiffies(200);
++
++ do {
++ stat = ltq_spi_reg_read(hw, LTQ_SPI_STAT);
++ if (!(stat & LTQ_SPI_STAT_BSY))
++ return 0;
++
++ cond_resched();
++ } while (!time_after_eq(jiffies, timeout));
++
++ dev_err(hw->dev, "SPI wait ready timed out stat: %x\n", stat);
++
++ return -ETIMEDOUT;
++}
++
++static void ltq_spi_config_mode_set(struct ltq_spi *hw)
++{
++ if (hw->cfg_mode)
++ return;
++
++ /*
++ * Putting the SPI module in config mode is only safe if no
++ * transfer is in progress as indicated by busy flag STATE.BSY.
++ */
++ if (ltq_spi_wait_ready(hw)) {
++ ltq_spi_reset_fifos(hw);
++ hw->status = -ETIMEDOUT;
++ }
++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE);
++
++ hw->cfg_mode = 1;
++}
++
++static void ltq_spi_run_mode_set(struct ltq_spi *hw)
++{
++ if (!hw->cfg_mode)
++ return;
++
++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE);
++
++ hw->cfg_mode = 0;
++}
++
++static u32 ltq_spi_tx_word_u8(struct ltq_spi *hw)
++{
++ const u8 *tx = hw->tx;
++ u32 data = *tx++;
++
++ hw->tx_cnt++;
++ hw->tx++;
++
++ return data;
++}
++
++static u32 ltq_spi_tx_word_u16(struct ltq_spi *hw)
++{
++ const u16 *tx = (u16 *) hw->tx;
++ u32 data = *tx++;
++
++ hw->tx_cnt += 2;
++ hw->tx += 2;
++
++ return data;
++}
++
++static u32 ltq_spi_tx_word_u32(struct ltq_spi *hw)
++{
++ const u32 *tx = (u32 *) hw->tx;
++ u32 data = *tx++;
++
++ hw->tx_cnt += 4;
++ hw->tx += 4;
++
++ return data;
++}
++
++static void ltq_spi_bits_per_word_set(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 bm;
++ u8 bits_per_word = spi->bits_per_word;
++
++ /*
++ * Use either default value of SPI device or value
++ * from current transfer.
++ */
++ if (hw->curr_transfer && hw->curr_transfer->bits_per_word)
++ bits_per_word = hw->curr_transfer->bits_per_word;
++
++ if (bits_per_word <= 8)
++ hw->get_tx = ltq_spi_tx_word_u8;
++ else if (bits_per_word <= 16)
++ hw->get_tx = ltq_spi_tx_word_u16;
++ else if (bits_per_word <= 32)
++ hw->get_tx = ltq_spi_tx_word_u32;
++
++ /* CON.BM value = bits_per_word - 1 */
++ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT;
++
++ ltq_spi_reg_clearbit(hw, LTQ_SPI_CON_BM_MASK <<
++ LTQ_SPI_CON_BM_SHIFT, LTQ_SPI_CON);
++ ltq_spi_reg_setbit(hw, bm, LTQ_SPI_CON);
++}
++
++static void ltq_spi_speed_set(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 br, max_speed_hz, spi_clk;
++ u32 speed_hz = spi->max_speed_hz;
++
++ /*
++ * Use either default value of SPI device or value
++ * from current transfer.
++ */
++ if (hw->curr_transfer && hw->curr_transfer->speed_hz)
++ speed_hz = hw->curr_transfer->speed_hz;
++
++ /*
++ * SPI module clock is derived from FPI bus clock dependent on
++ * divider value in CLC.RMS which is always set to 1.
++ */
++ spi_clk = clk_get_rate(hw->fpiclk);
++
++ /*
++ * Maximum SPI clock frequency in master mode is half of
++ * SPI module clock frequency. Maximum reload value of
++ * baudrate generator BR is 2^16.
++ */
++ max_speed_hz = spi_clk / 2;
++ if (speed_hz >= max_speed_hz)
++ br = 0;
++ else
++ br = (max_speed_hz / speed_hz) - 1;
++
++ if (br > 0xFFFF)
++ br = 0xFFFF;
++
++ ltq_spi_reg_write(hw, br, LTQ_SPI_BRT);
++}
++
++static void ltq_spi_clockmode_set(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 con;
++
++ con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
++
++ /*
++ * SPI mode mapping in CON register:
++ * Mode CPOL CPHA CON.PO CON.PH
++ * 0 0 0 0 1
++ * 1 0 1 0 0
++ * 2 1 0 1 1
++ * 3 1 1 1 0
++ */
++ if (spi->mode & SPI_CPHA)
++ con &= ~LTQ_SPI_CON_PH;
++ else
++ con |= LTQ_SPI_CON_PH;
++
++ if (spi->mode & SPI_CPOL)
++ con |= LTQ_SPI_CON_PO;
++ else
++ con &= ~LTQ_SPI_CON_PO;
++
++ /* Set heading control */
++ if (spi->mode & SPI_LSB_FIRST)
++ con &= ~LTQ_SPI_CON_HB;
++ else
++ con |= LTQ_SPI_CON_HB;
++
++ ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
++}
++
++static void ltq_spi_xmit_set(struct ltq_spi *hw, struct spi_transfer *t)
++{
++ u32 con;
++
++ con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
++
++ if (t) {
++ if (t->tx_buf && t->rx_buf) {
++ con &= ~(LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
++ } else if (t->rx_buf) {
++ con &= ~LTQ_SPI_CON_RXOFF;
++ con |= LTQ_SPI_CON_TXOFF;
++ } else if (t->tx_buf) {
++ con &= ~LTQ_SPI_CON_TXOFF;
++ con |= LTQ_SPI_CON_RXOFF;
++ }
++ } else
++ con |= (LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
++
++ ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
++}
++
++static void ltq_spi_internal_cs_activate(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 fgpo;
++
++ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_CLROUTN_SHIFT));
++ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
++}
++
++static void ltq_spi_internal_cs_deactivate(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 fgpo;
++
++ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
++ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
++}
++
++static void ltq_spi_chipselect(struct spi_device *spi, int cs)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++
++ switch (cs) {
++ case BITBANG_CS_ACTIVE:
++ ltq_spi_bits_per_word_set(spi);
++ ltq_spi_speed_set(spi);
++ ltq_spi_clockmode_set(spi);
++ ltq_spi_run_mode_set(hw);
++ ltq_spi_internal_cs_activate(spi);
++ break;
++
++ case BITBANG_CS_INACTIVE:
++ ltq_spi_internal_cs_deactivate(spi);
++ ltq_spi_config_mode_set(hw);
++ break;
++ }
++}
++
++static int ltq_spi_setup_transfer(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u8 bits_per_word = spi->bits_per_word;
++
++ hw->curr_transfer = t;
++
++ if (t && t->bits_per_word)
++ bits_per_word = t->bits_per_word;
++
++ if (bits_per_word > 32)
++ return -EINVAL;
++
++ ltq_spi_config_mode_set(hw);
++
++ return 0;
++}
++
++static int ltq_spi_setup(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 gpocon, fgpo;
++
++ /* Set default word length to 8 if not set */
++ if (!spi->bits_per_word)
++ spi->bits_per_word = 8;
++
++ if (spi->bits_per_word > 32)
++ return -EINVAL;
++
++ /*
++ * Up to six GPIOs can be connected to the SPI module
++ * via GPIO alternate function to control the chip select lines.
++ */
++ gpocon = (1 << (spi->chip_select +
++ LTQ_SPI_GPOCON_ISCSBN_SHIFT));
++
++ if (spi->mode & SPI_CS_HIGH)
++ gpocon |= (1 << spi->chip_select);
++
++ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
++
++ ltq_spi_reg_setbit(hw, gpocon, LTQ_SPI_GPOCON);
++ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
++
++ return 0;
++}
++
++static void ltq_spi_cleanup(struct spi_device *spi)
++{
++
++}
++
++static void ltq_spi_txfifo_write(struct ltq_spi *hw)
++{
++ u32 fstat, data;
++ u16 fifo_space;
++
++ /* Determine how much FIFOs are free for TX data */
++ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
++ fifo_space = hw->txfs - ((fstat >> LTQ_SPI_FSTAT_TXFFL_SHIFT) &
++ LTQ_SPI_FSTAT_TXFFL_MASK);
++
++ if (!fifo_space)
++ return;
++
++ while (hw->tx_cnt < hw->len && fifo_space) {
++ data = hw->get_tx(hw);
++ ltq_spi_reg_write(hw, data, LTQ_SPI_TB);
++ fifo_space--;
++ }
++}
++
++static void ltq_spi_rxfifo_read(struct ltq_spi *hw)
++{
++ u32 fstat, data, *rx32;
++ u16 fifo_fill;
++ u8 rxbv, shift, *rx8;
++
++ /* Determine how much FIFOs are filled with RX data */
++ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
++ fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT)
++ & LTQ_SPI_FSTAT_RXFFL_MASK);
++
++ if (!fifo_fill)
++ return;
++
++ /*
++ * The 32 bit FIFO is always used completely independent from the
++ * bits_per_word value. Thus four bytes have to be read at once
++ * per FIFO.
++ */
++ rx32 = (u32 *) hw->rx;
++ while (hw->len - hw->rx_cnt >= 4 && fifo_fill) {
++ *rx32++ = ltq_spi_reg_read(hw, LTQ_SPI_RB);
++ hw->rx_cnt += 4;
++ hw->rx += 4;
++ fifo_fill--;
++ }
++
++ /*
++ * If there are remaining bytes, read byte count from STAT.RXBV
++ * register and read the data byte-wise.
++ */
++ while (fifo_fill && hw->rx_cnt < hw->len) {
++ rxbv = (ltq_spi_reg_read(hw, LTQ_SPI_STAT) >>
++ LTQ_SPI_STAT_RXBV_SHIFT) & LTQ_SPI_STAT_RXBV_MASK;
++ data = ltq_spi_reg_read(hw, LTQ_SPI_RB);
++
++ shift = (rxbv - 1) * 8;
++ rx8 = hw->rx;
++
++ while (rxbv) {
++ *rx8++ = (data >> shift) & 0xFF;
++ rxbv--;
++ shift -= 8;
++ hw->rx_cnt++;
++ hw->rx++;
++ }
++
++ fifo_fill--;
++ }
++}
++
++static void ltq_spi_rxreq_set(struct ltq_spi *hw)
++{
++ u32 rxreq, rxreq_max, rxtodo;
++
++ rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK;
++
++ /*
++ * In RX-only mode the serial clock is activated only after writing
++ * the expected amount of RX bytes into RXREQ register.
++ * To avoid receive overflows at high clocks it is better to request
++ * only the amount of bytes that fits into all FIFOs. This value
++ * depends on the FIFO size implemented in hardware.
++ */
++ rxreq = hw->len - hw->rx_cnt;
++ rxreq_max = hw->rxfs << 2;
++ rxreq = min(rxreq_max, rxreq);
++
++ if (!rxtodo && rxreq)
++ ltq_spi_reg_write(hw, rxreq, LTQ_SPI_RXREQ);
++}
++
++static inline void ltq_spi_complete(struct ltq_spi *hw)
++{
++ complete(&hw->done);
++}
++
++irqreturn_t ltq_spi_tx_irq(int irq, void *data)
++{
++ struct ltq_spi *hw = data;
++ unsigned long flags;
++ int completed = 0;
++
++ spin_lock_irqsave(&hw->lock, flags);
++
++ if (hw->tx_cnt < hw->len)
++ ltq_spi_txfifo_write(hw);
++
++ if (hw->tx_cnt == hw->len)
++ completed = 1;
++
++ spin_unlock_irqrestore(&hw->lock, flags);
++
++ if (completed)
++ ltq_spi_complete(hw);
++
++ return IRQ_HANDLED;
++}
++
++irqreturn_t ltq_spi_rx_irq(int irq, void *data)
++{
++ struct ltq_spi *hw = data;
++ unsigned long flags;
++ int completed = 0;
++
++ spin_lock_irqsave(&hw->lock, flags);
++
++ if (hw->rx_cnt < hw->len) {
++ ltq_spi_rxfifo_read(hw);
++
++ if (hw->tx && hw->tx_cnt < hw->len)
++ ltq_spi_txfifo_write(hw);
++ }
++
++ if (hw->rx_cnt == hw->len)
++ completed = 1;
++ else if (!hw->tx)
++ ltq_spi_rxreq_set(hw);
++
++ spin_unlock_irqrestore(&hw->lock, flags);
++
++ if (completed)
++ ltq_spi_complete(hw);
++
++ return IRQ_HANDLED;
++}
++
++irqreturn_t ltq_spi_err_irq(int irq, void *data)
++{
++ struct ltq_spi *hw = data;
++ unsigned long flags;
++
++ spin_lock_irqsave(&hw->lock, flags);
++
++ /* Disable all interrupts */
++ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
++
++ /* Clear all error flags */
++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
++
++ /* Flush FIFOs */
++ ltq_spi_reg_setbit(hw, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON);
++ ltq_spi_reg_setbit(hw, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON);
++
++ hw->status = -EIO;
++ spin_unlock_irqrestore(&hw->lock, flags);
++
++ ltq_spi_complete(hw);
++
++ return IRQ_HANDLED;
++}
++
++static int ltq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 irq_flags = 0;
++
++ hw->tx = t->tx_buf;
++ hw->rx = t->rx_buf;
++ hw->len = t->len;
++ hw->tx_cnt = 0;
++ hw->rx_cnt = 0;
++ hw->status = 0;
++ INIT_COMPLETION(hw->done);
++
++ ltq_spi_xmit_set(hw, t);
++
++ /* Enable error interrupts */
++ ltq_spi_reg_setbit(hw, LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN);
++
++ if (hw->tx) {
++ /* Initially fill TX FIFO with as much data as possible */
++ ltq_spi_txfifo_write(hw);
++ irq_flags |= LTQ_SPI_IRNEN_T;
++
++ /* Always enable RX interrupt in Full Duplex mode */
++ if (hw->rx)
++ irq_flags |= LTQ_SPI_IRNEN_R;
++ } else if (hw->rx) {
++ /* Start RX clock */
++ ltq_spi_rxreq_set(hw);
++
++ /* Enable RX interrupt to receive data from RX FIFOs */
++ irq_flags |= LTQ_SPI_IRNEN_R;
++ }
++
++ /* Enable TX or RX interrupts */
++ ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN);
++ wait_for_completion_interruptible(&hw->done);
++
++ /* Disable all interrupts */
++ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
++
++ /*
++ * Return length of current transfer for bitbang utility code if
++ * no errors occured during transmission.
++ */
++ if (!hw->status)
++ hw->status = hw->len;
++
++ return hw->status;
++}
++
++static const struct ltq_spi_irq_map {
++ char *name;
++ irq_handler_t handler;
++} ltq_spi_irqs[] = {
++ { "spi_rx", ltq_spi_rx_irq },
++ { "spi_tx", ltq_spi_tx_irq },
++ { "spi_err", ltq_spi_err_irq },
++};
++
++static int ltq_spi_probe(struct platform_device *pdev)
++{
++ struct resource irqres[3];
++ struct spi_master *master;
++ struct resource *r;
++ struct ltq_spi *hw;
++ int ret, i;
++ u32 data, id;
++
++ if (of_irq_to_resource_table(pdev->dev.of_node, irqres, 3) != 3) {
++ dev_err(&pdev->dev, "IRQ settings missing in device tree\n");
++ return -EINVAL;
++ }
++
++ master = spi_alloc_master(&pdev->dev, sizeof(struct ltq_spi));
++ if (!master) {
++ dev_err(&pdev->dev, "spi_alloc_master\n");
++ ret = -ENOMEM;
++ goto err;
++ }
++
++ hw = spi_master_get_devdata(master);
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (r == NULL) {
++ dev_err(&pdev->dev, "platform_get_resource\n");
++ ret = -ENOENT;
++ goto err_master;
++ }
++
++ r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
++ pdev->name);
++ if (!r) {
++ dev_err(&pdev->dev, "failed to request memory region\n");
++ ret = -ENXIO;
++ goto err_master;
++ }
++
++ hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
++ if (!hw->base) {
++ dev_err(&pdev->dev, "failed to remap memory region\n");
++ ret = -ENXIO;
++ goto err_master;
++ }
++
++ memset(hw->irq, 0, sizeof(hw->irq));
++ for (i = 0; i < ARRAY_SIZE(ltq_spi_irqs); i++) {
++ hw->irq[i] = irqres[i].start;
++ ret = request_irq(hw->irq[i], ltq_spi_irqs[i].handler,
++ 0, ltq_spi_irqs[i].name, hw);
++ if (ret) {
++ dev_err(&pdev->dev, "failed to request %s irq (%d)\n",
++ ltq_spi_irqs[i].name, hw->irq[i]);
++ goto err_irq;
++ }
++ }
++
++ hw->fpiclk = clk_get_fpi();
++ if (IS_ERR(hw->fpiclk)) {
++ dev_err(&pdev->dev, "failed to get fpi clock\n");
++ ret = PTR_ERR(hw->fpiclk);
++ goto err_clk;
++ }
++
++ hw->spiclk = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(hw->spiclk)) {
++ dev_err(&pdev->dev, "failed to get spi clock gate\n");
++ ret = PTR_ERR(hw->spiclk);
++ goto err_clk;
++ }
++
++ hw->bitbang.master = spi_master_get(master);
++ hw->bitbang.chipselect = ltq_spi_chipselect;
++ hw->bitbang.setup_transfer = ltq_spi_setup_transfer;
++ hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs;
++
++ if (of_machine_is_compatible("lantiq,ase"))
++ master->num_chipselect = 3;
++ else
++ master->num_chipselect = 6;
++ master->bus_num = pdev->id;
++ master->setup = ltq_spi_setup;
++ master->cleanup = ltq_spi_cleanup;
++ master->dev.of_node = pdev->dev.of_node;
++
++ hw->dev = &pdev->dev;
++ init_completion(&hw->done);
++ spin_lock_init(&hw->lock);
++
++ ltq_spi_hw_enable(hw);
++
++ /* Read module capabilities */
++ id = ltq_spi_reg_read(hw, LTQ_SPI_ID);
++ hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
++ hw->rxfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
++ hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0;
++
++ ltq_spi_config_mode_set(hw);
++
++ /* Enable error checking, disable TX/RX, set idle value high */
++ data = LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
++ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN |
++ LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_IDLE;
++ ltq_spi_reg_write(hw, data, LTQ_SPI_CON);
++
++ /* Enable master mode and clear error flags */
++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETMS |
++ LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
++
++ /* Reset GPIO/CS registers */
++ ltq_spi_reg_write(hw, 0x0, LTQ_SPI_GPOCON);
++ ltq_spi_reg_write(hw, 0xFF00, LTQ_SPI_FGPO);
++
++ /* Enable and flush FIFOs */
++ ltq_spi_reset_fifos(hw);
++
++ ret = spi_bitbang_start(&hw->bitbang);
++ if (ret) {
++ dev_err(&pdev->dev, "spi_bitbang_start failed\n");
++ goto err_bitbang;
++ }
++
++ platform_set_drvdata(pdev, hw);
++
++ pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n",
++ id & LTQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support);
++
++ return 0;
++
++err_bitbang:
++ ltq_spi_hw_disable(hw);
++
++err_clk:
++ if (hw->fpiclk)
++ clk_put(hw->fpiclk);
++ if (hw->spiclk)
++ clk_put(hw->spiclk);
++
++err_irq:
++ clk_put(hw->fpiclk);
++
++ for (; i > 0; i--)
++ free_irq(hw->irq[i], hw);
++
++err_master:
++ spi_master_put(master);
++
++err:
++ return ret;
++}
++
++static int ltq_spi_remove(struct platform_device *pdev)
++{
++ struct ltq_spi *hw = platform_get_drvdata(pdev);
++ int ret, i;
++
++ ret = spi_bitbang_stop(&hw->bitbang);
++ if (ret)
++ return ret;
++
++ platform_set_drvdata(pdev, NULL);
++
++ ltq_spi_config_mode_set(hw);
++ ltq_spi_hw_disable(hw);
++
++ for (i = 0; i < ARRAY_SIZE(hw->irq); i++)
++ if (0 < hw->irq[i])
++ free_irq(hw->irq[i], hw);
++
++ if (hw->fpiclk)
++ clk_put(hw->fpiclk);
++ if (hw->spiclk)
++ clk_put(hw->spiclk);
++
++ spi_master_put(hw->bitbang.master);
++
++ return 0;
++}
++
++static const struct of_device_id ltq_spi_match[] = {
++ { .compatible = "lantiq,spi-xway" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ltq_spi_match);
++
++static struct platform_driver ltq_spi_driver = {
++ .probe = ltq_spi_probe,
++ .remove = ltq_spi_remove,
++ .driver = {
++ .name = "spi-xway",
++ .owner = THIS_MODULE,
++ .of_match_table = ltq_spi_match,
++ },
++};
++
++module_platform_driver(ltq_spi_driver);
++
++MODULE_DESCRIPTION("Lantiq SoC SPI controller driver");
++MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:spi-xway");
+--
+1.7.10.4
+
--- /dev/null
+From b1b9fca8c317afc3f2b78bb54f877e8a830a819d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 9 Aug 2013 18:47:27 +0200
+Subject: [PATCH 34/36] reset: Fix compile when reset RESET_CONTROLLER is not
+ selected
+
+Drivers need to protect their reset api calls with #ifdef to avoid compile
+errors.
+
+This patch adds dummy wrappers in the same way that linux/of.h does it.
+
+Cc: linux-kernel@vger.kernel.org
+Cc: Philipp Zabel <p.zabel@pengutronix.de>
+Cc: Gabor Juhos <juhosg@openwrt.org>
+---
+ include/linux/reset-controller.h | 16 ++++++++++++++
+ include/linux/reset.h | 43 ++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 59 insertions(+)
+
+diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h
+index 41a4695..f38f530 100644
+--- a/include/linux/reset-controller.h
++++ b/include/linux/reset-controller.h
+@@ -46,7 +46,23 @@ struct reset_controller_dev {
+ unsigned int nr_resets;
+ };
+
++#if defined(CONFIG_RESET_CONTROLLER)
++
+ int reset_controller_register(struct reset_controller_dev *rcdev);
+ void reset_controller_unregister(struct reset_controller_dev *rcdev);
+
++#else
++
++static inline int reset_controller_register(struct reset_controller_dev *rcdev)
++{
++ return -ENOSYS;
++}
++
++void reset_controller_unregister(struct reset_controller_dev *rcdev)
++{
++
++}
++
++#endif
++
+ #endif
+diff --git a/include/linux/reset.h b/include/linux/reset.h
+index 6082247..1b36c9e 100644
+--- a/include/linux/reset.h
++++ b/include/linux/reset.h
+@@ -1,9 +1,13 @@
+ #ifndef _LINUX_RESET_H_
+ #define _LINUX_RESET_H_
+
++#include <linux/err.h>
++
+ struct device;
+ struct reset_control;
+
++#if defined(CONFIG_RESET_CONTROLLER)
++
+ int reset_control_reset(struct reset_control *rstc);
+ int reset_control_assert(struct reset_control *rstc);
+ int reset_control_deassert(struct reset_control *rstc);
+@@ -14,4 +18,43 @@ struct reset_control *devm_reset_control_get(struct device *dev, const char *id)
+
+ int device_reset(struct device *dev);
+
++#else /* CONFIG_RESET_CONTROLLER */
++
++static inline int reset_control_reset(struct reset_control *rstc)
++{
++ return -ENOSYS;
++}
++
++static inline int reset_control_assert(struct reset_control *rstc)
++{
++ return -ENOSYS;
++}
++
++static inline int reset_control_deassert(struct reset_control *rstc)
++{
++ return -ENOSYS;
++}
++
++static inline struct reset_control *reset_control_get(struct device *dev, const char *id)
++{
++ return ERR_PTR(-ENOSYS);
++}
++
++static inline void reset_control_put(struct reset_control *rstc)
++{
++
++}
++
++static inline struct reset_control *devm_reset_control_get(struct device *dev, const char *id)
++{
++ return ERR_PTR(-ENOSYS);
++}
++
++static inline int device_reset(struct device *dev)
++{
++ return -ENOSYS;
++}
++
++#endif
++
+ #endif
+--
+1.7.10.4
+
--- /dev/null
+From f8c5db89e793a4bc6c1e87bd7b3a5cec16b75bc3 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 10 Sep 2014 22:42:14 +0200
+Subject: [PATCH 35/36] owrt: lantiq: wifi and ethernet eeprom handling
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h | 6 +
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 +
+ arch/mips/lantiq/xway/Makefile | 3 +
+ arch/mips/lantiq/xway/ath_eep.c | 282 ++++++++++++++++++++
+ arch/mips/lantiq/xway/eth_mac.c | 76 ++++++
+ arch/mips/lantiq/xway/pci-ath-fixup.c | 109 ++++++++
+ arch/mips/lantiq/xway/rt_eep.c | 60 +++++
+ 7 files changed, 539 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
+ create mode 100644 arch/mips/lantiq/xway/ath_eep.c
+ create mode 100644 arch/mips/lantiq/xway/eth_mac.c
+ create mode 100644 arch/mips/lantiq/xway/pci-ath-fixup.c
+ create mode 100644 arch/mips/lantiq/xway/rt_eep.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
+new file mode 100644
+index 0000000..095d261
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
+@@ -0,0 +1,6 @@
++#ifndef _PCI_ATH_FIXUP
++#define _PCI_ATH_FIXUP
++
++void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
++
++#endif /* _PCI_ATH_FIXUP */
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 133336b..779715c 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -90,5 +90,8 @@ int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr);
+ extern void ltq_pmu_enable(unsigned int module);
+ extern void ltq_pmu_disable(unsigned int module);
+
++/* allow the ethernet driver to load a flash mapped mac addr */
++const u8* ltq_get_eth_mac(void);
++
+ #endif /* CONFIG_SOC_TYPE_XWAY */
+ #endif /* _LTQ_XWAY_H__ */
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 2dd442c..de876e1 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -2,4 +2,7 @@ obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
+
+ obj-y += vmmc.o tffs.o
+
++obj-y += eth_mac.o
++obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
++
+ obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
+diff --git a/arch/mips/lantiq/xway/ath_eep.c b/arch/mips/lantiq/xway/ath_eep.c
+new file mode 100644
+index 0000000..aff42ac
+--- /dev/null
++++ b/arch/mips/lantiq/xway/ath_eep.c
+@@ -0,0 +1,282 @@
++/*
++ * Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
++ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
++ * Copyright (C) 2013 Álvaro Fernández Rojas <noltari@gmail.com>
++ * Copyright (C) 2013 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/etherdevice.h>
++#include <linux/ath5k_platform.h>
++#include <linux/ath9k_platform.h>
++#include <linux/pci.h>
++#include <linux/err.h>
++#include <linux/mtd/mtd.h>
++#include <pci-ath-fixup.h>
++#include <lantiq_soc.h>
++
++extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
++struct ath5k_platform_data ath5k_pdata;
++struct ath9k_platform_data ath9k_pdata = {
++ .led_pin = -1,
++};
++static u8 athxk_eeprom_mac[6];
++
++static int ath9k_pci_plat_dev_init(struct pci_dev *dev)
++{
++ dev->dev.platform_data = &ath9k_pdata;
++ return 0;
++}
++
++static int ath9k_eep_load;
++int __init of_ath9k_eeprom_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node, *mtd_np;
++ struct resource *eep_res, *mac_res = NULL;
++ void __iomem *eep, *mac;
++ int mac_offset, led_pin;
++ u32 mac_inc = 0, pci_slot = 0;
++ int i;
++ struct mtd_info *the_mtd;
++ size_t flash_readlen;
++ const __be32 *list;
++ const char *part;
++ phandle phandle;
++
++ if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
++ sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
++ (mtd_np = of_find_node_by_phandle(phandle)) && ((part =
++ of_get_property(mtd_np, "label", NULL)) || (part =
++ mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
++ != ERR_PTR(-ENODEV)) {
++ i = mtd_read(the_mtd, be32_to_cpup(list),
++ ATH9K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
++ (void *) ath9k_pdata.eeprom_data);
++ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
++ size_t mac_readlen;
++ mtd_read(the_mtd, mac_offset, 6, &mac_readlen,
++ (void *) athxk_eeprom_mac);
++ }
++ put_mtd_device(the_mtd);
++ if ((sizeof(ath9k_pdata.eeprom_data) != flash_readlen) || i) {
++ dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
++ return -ENODEV;
++ }
++ } else {
++ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++
++ if (!eep_res) {
++ dev_err(&pdev->dev, "failed to load eeprom address\n");
++ return -ENODEV;
++ }
++ if (resource_size(eep_res) != ATH9K_PLAT_EEP_MAX_WORDS << 1) {
++ dev_err(&pdev->dev, "eeprom has an invalid size\n");
++ return -EINVAL;
++ }
++
++ eep = ioremap(eep_res->start, resource_size(eep_res));
++ memcpy_fromio(ath9k_pdata.eeprom_data, eep,
++ ATH9K_PLAT_EEP_MAX_WORDS << 1);
++ }
++
++ if (of_find_property(np, "ath,eep-swap", NULL))
++ for (i = 0; i < ATH9K_PLAT_EEP_MAX_WORDS; i++)
++ ath9k_pdata.eeprom_data[i] = swab16(ath9k_pdata.eeprom_data[i]);
++
++ if (of_find_property(np, "ath,eep-endian", NULL)) {
++ ath9k_pdata.endian_check = true;
++
++ dev_info(&pdev->dev, "endian check enabled.\n");
++ }
++
++ if (!is_valid_ether_addr(athxk_eeprom_mac)) {
++ if (mac_res) {
++ if (resource_size(mac_res) != 6) {
++ dev_err(&pdev->dev, "mac has an invalid size\n");
++ return -EINVAL;
++ }
++ mac = ioremap(mac_res->start, resource_size(mac_res));
++ memcpy_fromio(athxk_eeprom_mac, mac, 6);
++ } else if (ltq_get_eth_mac()) {
++ memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
++ }
++ }
++ if (!is_valid_ether_addr(athxk_eeprom_mac)) {
++ dev_warn(&pdev->dev, "using random mac\n");
++ random_ether_addr(athxk_eeprom_mac);
++ }
++
++ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
++ athxk_eeprom_mac[5] += mac_inc;
++
++ ath9k_pdata.macaddr = athxk_eeprom_mac;
++ ltq_pci_plat_dev_init = ath9k_pci_plat_dev_init;
++
++ if (!of_property_read_u32(np, "ath,pci-slot", &pci_slot)) {
++ ltq_pci_ath_fixup(pci_slot, ath9k_pdata.eeprom_data);
++
++ dev_info(&pdev->dev, "pci slot: %u\n", pci_slot);
++ if (ath9k_eep_load) {
++ struct pci_dev *d = NULL;
++ while ((d = pci_get_device(PCI_VENDOR_ID_ATHEROS,
++ PCI_ANY_ID, d)) != NULL)
++ pci_fixup_device(pci_fixup_early, d);
++ }
++
++ }
++
++ if (!of_property_read_u32(np, "ath,led-pin", &led_pin)) {
++ ath9k_pdata.led_pin = led_pin;
++ dev_info(&pdev->dev, "using led pin %d.\n", led_pin);
++ }
++
++ dev_info(&pdev->dev, "loaded ath9k eeprom\n");
++
++ return 0;
++}
++
++static struct of_device_id ath9k_eeprom_ids[] = {
++ { .compatible = "ath9k,eeprom" },
++ { }
++};
++
++static struct platform_driver ath9k_eeprom_driver = {
++ .driver = {
++ .name = "ath9k,eeprom",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(ath9k_eeprom_ids),
++ },
++};
++
++static int __init of_ath9k_eeprom_init(void)
++{
++ int ret = platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
++
++ if (ret)
++ ath9k_eep_load = 1;
++
++ return ret;
++}
++
++static int __init of_ath9k_eeprom_init_late(void)
++{
++ if (!ath9k_eep_load)
++ return 0;
++ return platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
++}
++late_initcall(of_ath9k_eeprom_init_late);
++subsys_initcall(of_ath9k_eeprom_init);
++
++
++static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
++{
++ dev->dev.platform_data = &ath5k_pdata;
++ return 0;
++}
++
++int __init of_ath5k_eeprom_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node, *mtd_np;
++ struct resource *eep_res, *mac_res = NULL;
++ void __iomem *eep, *mac;
++ int mac_offset;
++ u32 mac_inc = 0;
++ int i;
++ struct mtd_info *the_mtd;
++ size_t flash_readlen;
++ const __be32 *list;
++ const char *part;
++ phandle phandle;
++
++ if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
++ sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
++ (mtd_np = of_find_node_by_phandle(phandle)) && ((part =
++ of_get_property(mtd_np, "label", NULL)) || (part =
++ mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
++ != ERR_PTR(-ENODEV)) {
++ i = mtd_read(the_mtd, be32_to_cpup(list),
++ ATH5K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
++ (void *) ath5k_pdata.eeprom_data);
++ put_mtd_device(the_mtd);
++ if ((sizeof(ATH5K_PLAT_EEP_MAX_WORDS << 1) != flash_readlen)
++ || i) {
++ dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
++ return -ENODEV;
++ }
++ } else {
++ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++
++ if (!eep_res) {
++ dev_err(&pdev->dev, "failed to load eeprom address\n");
++ return -ENODEV;
++ }
++ if (resource_size(eep_res) != ATH5K_PLAT_EEP_MAX_WORDS << 1) {
++ dev_err(&pdev->dev, "eeprom has an invalid size\n");
++ return -EINVAL;
++ }
++
++ eep = ioremap(eep_res->start, resource_size(eep_res));
++ ath5k_pdata.eeprom_data = kmalloc(ATH5K_PLAT_EEP_MAX_WORDS<<1,
++ GFP_KERNEL);
++ memcpy_fromio(ath5k_pdata.eeprom_data, eep,
++ ATH5K_PLAT_EEP_MAX_WORDS << 1);
++ }
++
++ if (of_find_property(np, "ath,eep-swap", NULL))
++ for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++)
++ ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]);
++
++ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
++ memcpy_fromio(athxk_eeprom_mac, (void*) ath5k_pdata.eeprom_data + mac_offset, 6);
++ } else if (mac_res) {
++ if (resource_size(mac_res) != 6) {
++ dev_err(&pdev->dev, "mac has an invalid size\n");
++ return -EINVAL;
++ }
++ mac = ioremap(mac_res->start, resource_size(mac_res));
++ memcpy_fromio(athxk_eeprom_mac, mac, 6);
++ } else if (ltq_get_eth_mac())
++ memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
++ else {
++ dev_warn(&pdev->dev, "using random mac\n");
++ random_ether_addr(athxk_eeprom_mac);
++ }
++
++ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
++ athxk_eeprom_mac[5] += mac_inc;
++
++ ath5k_pdata.macaddr = athxk_eeprom_mac;
++ ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init;
++
++ dev_info(&pdev->dev, "loaded ath5k eeprom\n");
++
++ return 0;
++}
++
++static struct of_device_id ath5k_eeprom_ids[] = {
++ { .compatible = "ath5k,eeprom" },
++ { }
++};
++
++static struct platform_driver ath5k_eeprom_driver = {
++ .driver = {
++ .name = "ath5k,eeprom",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(ath5k_eeprom_ids),
++ },
++};
++
++static int __init of_ath5k_eeprom_init(void)
++{
++ return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
++}
++device_initcall(of_ath5k_eeprom_init);
+diff --git a/arch/mips/lantiq/xway/eth_mac.c b/arch/mips/lantiq/xway/eth_mac.c
+new file mode 100644
+index 0000000..d288a0e
+--- /dev/null
++++ b/arch/mips/lantiq/xway/eth_mac.c
+@@ -0,0 +1,76 @@
++/*
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/of_platform.h>
++#include <linux/if_ether.h>
++
++static u8 eth_mac[6];
++static int eth_mac_set;
++
++const u8* ltq_get_eth_mac(void)
++{
++ return eth_mac;
++}
++
++static int __init setup_ethaddr(char *str)
++{
++ eth_mac_set = mac_pton(str, eth_mac);
++ return !eth_mac_set;
++}
++__setup("ethaddr=", setup_ethaddr);
++
++int __init of_eth_mac_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct resource *mac_res;
++ void __iomem *mac;
++ u32 mac_inc = 0;
++
++ if (eth_mac_set) {
++ dev_err(&pdev->dev, "mac was already set by bootloader\n");
++ return -EINVAL;
++ }
++ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++ if (!mac_res) {
++ dev_err(&pdev->dev, "failed to load mac\n");
++ return -EINVAL;
++ }
++ if (resource_size(mac_res) != 6) {
++ dev_err(&pdev->dev, "mac has an invalid size\n");
++ return -EINVAL;
++ }
++ mac = ioremap(mac_res->start, resource_size(mac_res));
++ memcpy_fromio(eth_mac, mac, 6);
++
++ if (!of_property_read_u32(np, "mac-increment", &mac_inc))
++ eth_mac[5] += mac_inc;
++
++ return 0;
++}
++
++static struct of_device_id eth_mac_ids[] = {
++ { .compatible = "lantiq,eth-mac" },
++ { /* sentinel */ }
++};
++
++static struct platform_driver eth_mac_driver = {
++ .driver = {
++ .name = "lantiq,eth-mac",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(eth_mac_ids),
++ },
++};
++
++static int __init of_eth_mac_init(void)
++{
++ return platform_driver_probe(ð_mac_driver, of_eth_mac_probe);
++}
++device_initcall(of_eth_mac_init);
+diff --git a/arch/mips/lantiq/xway/pci-ath-fixup.c b/arch/mips/lantiq/xway/pci-ath-fixup.c
+new file mode 100644
+index 0000000..c87ffb2
+--- /dev/null
++++ b/arch/mips/lantiq/xway/pci-ath-fixup.c
+@@ -0,0 +1,109 @@
++/*
++ * Atheros AP94 reference board PCI initialization
++ *
++ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <lantiq_soc.h>
++
++#define LTQ_PCI_MEM_BASE 0x18000000
++
++struct ath_fixup {
++ u16 *cal_data;
++ unsigned slot;
++};
++
++static int ath_num_fixups;
++static struct ath_fixup ath_fixups[2];
++
++static void ath_pci_fixup(struct pci_dev *dev)
++{
++ void __iomem *mem;
++ u16 *cal_data = NULL;
++ u16 cmd;
++ u32 bar0;
++ u32 val;
++ unsigned i;
++
++ for (i = 0; i < ath_num_fixups; i++) {
++ if (ath_fixups[i].cal_data == NULL)
++ continue;
++
++ if (ath_fixups[i].slot != PCI_SLOT(dev->devfn))
++ continue;
++
++ cal_data = ath_fixups[i].cal_data;
++ break;
++ }
++
++ if (cal_data == NULL)
++ return;
++
++ if (*cal_data != 0xa55a) {
++ pr_err("pci %s: invalid calibration data\n", pci_name(dev));
++ return;
++ }
++
++ pr_info("pci %s: fixup device configuration\n", pci_name(dev));
++
++ mem = ioremap(LTQ_PCI_MEM_BASE, 0x10000);
++ if (!mem) {
++ pr_err("pci %s: ioremap error\n", pci_name(dev));
++ return;
++ }
++
++ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, LTQ_PCI_MEM_BASE);
++ pci_read_config_word(dev, PCI_COMMAND, &cmd);
++ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++ pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++ /* set pointer to first reg address */
++ cal_data += 3;
++ while (*cal_data != 0xffff) {
++ u32 reg;
++ reg = *cal_data++;
++ val = *cal_data++;
++ val |= (*cal_data++) << 16;
++
++ ltq_w32(swab32(val), mem + reg);
++ udelay(100);
++ }
++
++ pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
++ dev->vendor = val & 0xffff;
++ dev->device = (val >> 16) & 0xffff;
++
++ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
++ dev->revision = val & 0xff;
++ dev->class = val >> 8; /* upper 3 bytes */
++
++ pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n",
++ pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class);
++
++ pci_read_config_word(dev, PCI_COMMAND, &cmd);
++ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
++ pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
++
++ iounmap(mem);
++}
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup);
++
++void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data)
++{
++ if (ath_num_fixups >= ARRAY_SIZE(ath_fixups))
++ return;
++
++ ath_fixups[ath_num_fixups].slot = slot;
++ ath_fixups[ath_num_fixups].cal_data = cal_data;
++ ath_num_fixups++;
++}
+diff --git a/arch/mips/lantiq/xway/rt_eep.c b/arch/mips/lantiq/xway/rt_eep.c
+new file mode 100644
+index 0000000..00f2d4c
+--- /dev/null
++++ b/arch/mips/lantiq/xway/rt_eep.c
+@@ -0,0 +1,60 @@
++/*
++ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/pci.h>
++#include <linux/platform_device.h>
++#include <linux/rt2x00_platform.h>
++
++extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
++static struct rt2x00_platform_data rt2x00_pdata;
++
++static int rt2x00_pci_plat_dev_init(struct pci_dev *dev)
++{
++ dev->dev.platform_data = &rt2x00_pdata;
++ return 0;
++}
++
++int __init of_ralink_eeprom_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ const char *eeprom;
++
++ if (of_property_read_string(np, "ralink,eeprom", &eeprom)) {
++ dev_err(&pdev->dev, "failed to load eeprom filename\n");
++ return 0;
++ }
++
++ rt2x00_pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
++// rt2x00_pdata.mac_address = mac;
++ ltq_pci_plat_dev_init = rt2x00_pci_plat_dev_init;
++
++ dev_info(&pdev->dev, "using %s as eeprom\n", eeprom);
++
++ return 0;
++}
++
++static struct of_device_id ralink_eeprom_ids[] = {
++ { .compatible = "ralink,eeprom" },
++ { }
++};
++
++static struct platform_driver ralink_eeprom_driver = {
++ .driver = {
++ .name = "ralink,eeprom",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(ralink_eeprom_ids),
++ },
++};
++
++static int __init of_ralink_eeprom_init(void)
++{
++ return platform_driver_probe(&ralink_eeprom_driver, of_ralink_eeprom_probe);
++}
++device_initcall(of_ralink_eeprom_init);
+--
+1.7.10.4
+
--- /dev/null
+From dba8578e06aedf1e67312ebfc6162e2fadc9448d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 7 Aug 2014 18:32:12 +0200
+Subject: [PATCH 36/36] owrt: generic dtb image hack
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/kernel/head.S | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
+index 7b6a5b3..78518b8 100644
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -101,6 +101,9 @@ FEXPORT(__kernel_entry)
+ j kernel_entry
+ #endif
+
++ .ascii "OWRTDTB:"
++ EXPORT(__image_dtb)
++ .fill 0x4000
+ __REF
+
+ NESTED(kernel_entry, 16, sp) # kernel entry point
+--
+1.7.10.4
+
--- /dev/null
+From baea71233ed1796651cab6ead484a18666a765aa Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 11 Sep 2014 19:25:25 +0200
+Subject: [PATCH] MIPS: lantiq: move eiu init after irq_domain register
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/irq.c | 48 ++++++++++++++++++++++++------------------------
+ 1 file changed, 24 insertions(+), 24 deletions(-)
+
+diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
+index 6b94cc7..3bbedf6 100644
+--- a/arch/mips/lantiq/irq.c
++++ b/arch/mips/lantiq/irq.c
+@@ -380,30 +380,6 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
+ panic("Failed to remap icu memory");
+ }
+
+- /* the external interrupts are optional and xway only */
+- eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
+- if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
+- /* find out how many external irq sources we have */
+- exin_avail = of_irq_count(eiu_node);
+-
+- if (exin_avail > MAX_EIU)
+- exin_avail = MAX_EIU;
+-
+- ret = of_irq_to_resource_table(eiu_node,
+- ltq_eiu_irq, exin_avail);
+- if (ret != exin_avail)
+- panic("failed to load external irq resources");
+-
+- if (request_mem_region(res.start, resource_size(&res),
+- res.name) < 0)
+- pr_err("Failed to request eiu memory");
+-
+- ltq_eiu_membase = ioremap_nocache(res.start,
+- resource_size(&res));
+- if (!ltq_eiu_membase)
+- panic("Failed to remap eiu memory");
+- }
+-
+ /* turn off all irqs by default */
+ for (i = 0; i < MAX_IM; i++) {
+ /* make sure all irqs are turned off by default */
+@@ -460,6 +436,30 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
+ if (MIPS_CPU_TIMER_IRQ != 7)
+ irq_create_mapping(ltq_domain, MIPS_CPU_TIMER_IRQ);
+
++ /* the external interrupts are optional and xway only */
++ eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
++ if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
++ /* find out how many external irq sources we have */
++ exin_avail = of_irq_count(eiu_node);
++
++ if (exin_avail > MAX_EIU)
++ exin_avail = MAX_EIU;
++
++ ret = of_irq_to_resource_table(eiu_node,
++ ltq_eiu_irq, exin_avail);
++ if (ret != exin_avail)
++ panic("failed to load external irq resources");
++
++ if (request_mem_region(res.start, resource_size(&res),
++ res.name) < 0)
++ pr_err("Failed to request eiu memory");
++
++ ltq_eiu_membase = ioremap_nocache(res.start,
++ resource_size(&res));
++ if (!ltq_eiu_membase)
++ panic("Failed to remap eiu memory");
++ }
++
+ return 0;
+ }
+
+--
+1.7.10.4
+
--- /dev/null
+Index: linux-3.14.18/arch/mips/lantiq/xway/Makefile
+===================================================================
+--- linux-3.14.18.orig/arch/mips/lantiq/xway/Makefile 2014-09-11 16:31:10.000000000 +0200
++++ linux-3.14.18/arch/mips/lantiq/xway/Makefile 2014-09-11 16:32:52.188968735 +0200
+@@ -1,6 +1,6 @@
+ obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
+
+-obj-y += vmmc.o tffs.o
++obj-y += vmmc.o tffs.o mtd_split.o
+
+ obj-y += eth_mac.o
+ obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
+Index: linux-3.14.18/arch/mips/lantiq/xway/mtd_split.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-3.14.18/arch/mips/lantiq/xway/mtd_split.c 2014-09-11 16:31:51.712967248 +0200
+@@ -0,0 +1,129 @@
++#include <linux/magic.h>
++#include <linux/root_dev.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#define ROOTFS_SPLIT_NAME "rootfs_data"
++
++struct squashfs_super_block {
++ __le32 s_magic;
++ __le32 pad0[9];
++ __le64 bytes_used;
++};
++
++static void split_brnimage_kernel(struct mtd_info *master, const char *name,
++ int offset, int size)
++{
++ unsigned long buf[4];
++ // Assume at most 2MB of kernel image
++ unsigned long end = offset + (2 << 20);
++ unsigned long part_size = offset + 0x400 - 12;
++ size_t len;
++ int ret;
++
++ if (strcmp(name, "firmware") != 0)
++ return;
++ while (part_size < end) {
++ long size_min = part_size - 0x400 - 12 - offset;
++ long size_max = part_size + 12 - offset;
++ ret = mtd_read(master, part_size, 16, &len, (void *)buf);
++ if (ret || len != 16)
++ return;
++
++ if (le32_to_cpu(buf[0]) < size_min ||
++ le32_to_cpu(buf[0]) > size_max) {
++ part_size += 0x400;
++ continue;
++ }
++
++ if (le32_to_cpu(buf[3]) == SQUASHFS_MAGIC) {
++ part_size += 12 - offset;
++ __mtd_add_partition(master, "rootfs", offset + part_size,
++ size - part_size, false);
++ return;
++ }
++ part_size += 0x400;
++ }
++}
++
++static void split_eva_kernel(struct mtd_info *master, const char *name,
++ int offset, int size)
++{
++#define EVA_MAGIC 0xfeed1281
++ unsigned long magic = 0;
++ unsigned long part_size = 0, p;
++ size_t len;
++ int ret;
++
++ if (strcmp(name, CONFIG_MTD_SPLIT_FIRMWARE_NAME) != 0)
++ return;
++
++ ret = mtd_read(master, offset, 4, &len, (void *)&magic);
++ if (ret || len != sizeof(magic))
++ return;
++
++ if (le32_to_cpu(magic) != EVA_MAGIC)
++ return;
++
++ ret = mtd_read(master, offset + 4, 4, &len, (void *)&part_size);
++ if (ret || len != sizeof(part_size))
++ return;
++
++ p = part_size = le32_to_cpu(part_size) + 0x18;
++ p &= ~0xffff;
++ p += 0x10000;
++
++ ret = mtd_read(master, offset + p, 4, &len, (void *)&magic);
++ if (ret || len != sizeof(magic))
++ return;
++
++ if (magic == SQUASHFS_MAGIC)
++ part_size = p + 0x100;
++ else
++ part_size = mtd_pad_erasesize(master, offset, len);
++
++ if (part_size + master->erasesize > size)
++ return;
++
++ __mtd_add_partition(master, "rootfs", offset + part_size,
++ size - part_size, false);
++}
++
++static void split_tplink_kernel(struct mtd_info *master, const char *name,
++ int offset, int size)
++{
++#define TPLINK_MAGIC 0x00000002
++ unsigned long magic = 0;
++ unsigned long part_size = 0;
++ size_t len;
++ int ret;
++
++ if (strcmp(name, CONFIG_MTD_SPLIT_FIRMWARE_NAME) != 0)
++ return;
++
++ ret = mtd_read(master, offset, 4, &len, (void *)&magic);
++ if (ret || len != sizeof(magic))
++ return;
++
++ if (le32_to_cpu(magic) != TPLINK_MAGIC)
++ return;
++
++ ret = mtd_read(master, offset + 0x78, 4, &len, (void *)&part_size);
++ if (ret || len != sizeof(part_size))
++ return;
++
++ part_size = be32_to_cpu(part_size) + 0x200;
++ if (part_size + master->erasesize > size)
++ return;
++
++ __mtd_add_partition(master, "rootfs", offset + part_size,
++ size - part_size, false);
++}
++
++void arch_split_mtd_part(struct mtd_info *master, const char *name,
++ int offset, int size)
++{
++ split_tplink_kernel(master, name, offset, size);
++ split_eva_kernel(master, name, offset, size);
++ split_brnimage_kernel(master, name, offset, size);
++}
+Index: linux-3.14.18/include/linux/mtd/partitions.h
+===================================================================
+--- linux-3.14.18.orig/include/linux/mtd/partitions.h 2014-09-11 16:31:10.752966240 +0200
++++ linux-3.14.18/include/linux/mtd/partitions.h 2014-09-11 16:44:49.432986380 +0200
+@@ -89,12 +89,17 @@
+ int mtd_is_partition(const struct mtd_info *mtd);
+ int mtd_add_partition(struct mtd_info *master, const char *name,
+ long long offset, long long length);
++int __mtd_add_partition(struct mtd_info *master, const char *name,
++ long long offset, long long length, bool dup_check);
++
+ int mtd_del_partition(struct mtd_info *master, int partno);
+ struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd);
+ uint64_t mtdpart_get_offset(const struct mtd_info *mtd);
+ uint64_t mtd_get_device_size(const struct mtd_info *mtd);
+-extern void __weak arch_split_mtd_part(struct mtd_info *master,
+- const char *name, int offset, int size);
++void __weak arch_split_mtd_part(struct mtd_info *master,
++ const char *name, int offset, int size);
++unsigned long
++mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len);
+
+ int parse_mtd_partitions_by_type(struct mtd_info *master,
+ enum mtd_parser_type type,
+Index: linux-3.14.18/drivers/mtd/mtdpart.c
+===================================================================
+--- linux-3.14.18.orig/drivers/mtd/mtdpart.c 2014-09-11 16:31:10.752966240 +0200
++++ linux-3.14.18/drivers/mtd/mtdpart.c 2014-09-11 16:33:11.732969216 +0200
+@@ -617,7 +617,7 @@
+ }
+
+
+-static int
++int
+ __mtd_add_partition(struct mtd_info *master, const char *name,
+ long long offset, long long length, bool dup_check)
+ {
+@@ -738,7 +738,7 @@
+ return nr_parts;
+ }
+
+-static inline unsigned long
++unsigned long
+ mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len)
+ {
+ unsigned long mask = mtd->erasesize - 1;
+@@ -807,7 +807,6 @@
+ return;
+
+ len = be32_to_cpu(hdr.size) + 0x40;
+- len = mtd_pad_erasesize(master, part->offset, len);
+ if (len + master->erasesize > part->mtd.size)
+ return;
+
projects / openwrt / openwrt.git / commitdiff