ar71xx: add support for PQI Air Pen
authorYuheiOKAWA <tochiro.srchack@gmail.com>
Tue, 10 Jan 2017 09:47:19 +0000 (18:47 +0900)
committerJohn Crispin <john@phrozen.org>
Thu, 19 Jan 2017 23:52:48 +0000 (00:52 +0100)
SoC: AR9331
Ethernet x1, Wireless 2.4G, uSD card slot x1.
USB Power, include Li-Po Battery.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
Changes in v2:
alphabetical ordering, tabs fron spaces.

target/linux/ar71xx/base-files/etc/board.d/01_leds
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-4.4
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c [new file with mode: 0644]
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/image/generic.mk

index fb0dda3..7a7329f 100755 (executable)
@@ -431,6 +431,10 @@ omy-x1)
        ucidef_set_led_default "power" "POWER" "omy:green:power" "1"
        ucidef_set_led_default "wan" "WAN" "omy:green:wan" "eth0"
        ;;
+pqi-air-pen)
+       ucidef_set_led_wlan "wlan" "WLAN" "pqi-air-pen:blue:wlan" "phy0tpt"
+       ucidef_set_led_default "wps" "WPS" "pqi-air-pen:blue:wps" "0"
+       ;;
 qihoo-c301)
        ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt"
        ;;
index 987a8e4..09986c0 100755 (executable)
@@ -83,6 +83,7 @@ ar71xx_setup_interfaces()
        mr900|\
        mr900v2|\
        mynet-rext|\
+       pqi-air-pen|\
        rb-411|\
        rb-411u|\
        rb-911g-2hpnd|\
index eb8b671..ad73ec1 100755 (executable)
@@ -775,6 +775,9 @@ ar71xx_board_detect() {
        *"PB44 reference board")
                name="pb44"
                ;;
+       *"PQI Air Pen")
+               name="pqi-air-pen"
+               ;;
        *"Qihoo 360 C301")
                name="qihoo-c301"
                ;;
index 02eb960..9cf2049 100755 (executable)
@@ -250,6 +250,7 @@ platform_check_image() {
        nanostation-m-xw|\
        nanostation-m|\
        nbg460n_550n_550nh|\
+       pqi-air-pen|\
        rocket-m-ti|\
        rocket-m-xw|\
        rocket-m|\
index 427e8bd..26de3a6 100644 (file)
@@ -136,6 +136,7 @@ CONFIG_ATH79_MACH_OMY_X1=y
 CONFIG_ATH79_MACH_ONION_OMEGA=y
 CONFIG_ATH79_MACH_PB42=y
 CONFIG_ATH79_MACH_PB44=y
+CONFIG_ATH79_MACH_PQI_AIR_PEN=y
 CONFIG_ATH79_MACH_QIHOO_C301=y
 CONFIG_ATH79_MACH_R6100=y
 # CONFIG_ATH79_MACH_RB2011 is not set
index 3c10be9..c3f9588 100644 (file)
@@ -276,6 +276,16 @@ config ATH79_MACH_ESR1750
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_PQI_AIR_PEN
+       bool "PQI Air Pen"
+       select SOC_AR933X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_SOM9331
        bool "SOM9331 support"
        select SOC_AR933X
index 8ce07a4..ac0bbc4 100644 (file)
@@ -140,6 +140,7 @@ obj-$(CONFIG_ATH79_MACH_OMY_X1)                     += mach-omy-x1.o
 obj-$(CONFIG_ATH79_MACH_ONION_OMEGA)           += mach-onion-omega.o
 obj-$(CONFIG_ATH79_MACH_PB42)                  += mach-pb42.o
 obj-$(CONFIG_ATH79_MACH_PB44)                  += mach-pb44.o
+obj-$(CONFIG_ATH79_MACH_PQI_AIR_PEN)           += mach-pqi-air-pen.o
 obj-$(CONFIG_ATH79_MACH_QIHOO_C301)            += mach-qihoo-c301.o
 obj-$(CONFIG_ATH79_MACH_R6100)                 += mach-r6100.o
 obj-$(CONFIG_ATH79_MACH_RB2011)                        += mach-rb2011.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c
new file mode 100644 (file)
index 0000000..56769bf
--- /dev/null
@@ -0,0 +1,99 @@
+/*
+ *  PQI Air Pen stick support
+ *
+ *  Copyright (C) 2016 YuheiOKAWA <tochiro.srchack@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define PQI_AIR_PEN_GPIO_LED_WLAN              0
+#define PQI_AIR_PEN_GPIO_LED_WPS               23
+
+#define PQI_AIR_PEN_GPIO_BTN_WPS               22
+#define PQI_AIR_PEN_GPIO_BTN_RESET             12
+
+#define PQI_AIR_PEN_KEYS_POLL_INTERVAL         20 /* msecs */
+#define PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL     (3 * PQI_AIR_PEN_KEYS_POLL_INTERVAL)
+
+#define PQI_AIR_PEN_WMAC_CALDATA_OFFSET                0x1000
+#define PQI_AIR_PEN_LAN_MAC_OFFSET             0x1002
+#define PQI_AIR_PEN_WMAC_MAC_OFFSET            0x1002
+
+static struct gpio_led pqi_air_pen_leds_gpio[] __initdata = {
+       {
+               .name = "pqi-air-pen:blue:wlan",
+               .gpio = PQI_AIR_PEN_GPIO_LED_WLAN,
+               .active_low = 0,
+       },
+       {
+               .name = "pqi-air-pen:blue:wps",
+               .gpio = PQI_AIR_PEN_GPIO_LED_WPS,
+               .active_low = 0,
+       },
+};
+
+static struct gpio_keys_button pqi_air_pen_gpio_keys[] __initdata = {
+       {
+               .desc = "wps",
+               .type = EV_KEY,
+               .code = KEY_WPS_BUTTON,
+               .debounce_interval = PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL,
+               .gpio = PQI_AIR_PEN_GPIO_BTN_WPS,
+               .active_low = 0,
+       },
+       {
+               .desc = "reset",
+               .type = EV_KEY,
+               .code = KEY_RESTART,
+               .debounce_interval = PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL,
+               .gpio = PQI_AIR_PEN_GPIO_BTN_RESET,
+               .active_low = 0,
+       },
+};
+
+static void __init pqi_air_pen_setup(void)
+{
+       /* ART base address */
+       u8 *art = (u8 *) KSEG1ADDR(0x9f050000);
+
+       /* register flash. */
+       ath79_register_m25p80(NULL);
+
+       /* register wireless mac with cal data */
+       ath79_register_wmac(art + PQI_AIR_PEN_WMAC_CALDATA_OFFSET, art + PQI_AIR_PEN_WMAC_MAC_OFFSET);
+
+       /* false PHY_SWAP and PHY_ADDR_SWAP bits */
+       ath79_setup_ar933x_phy4_switch(false, false);
+
+       /* register gpio LEDs and keys */
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(pqi_air_pen_leds_gpio),
+                                pqi_air_pen_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, PQI_AIR_PEN_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(pqi_air_pen_gpio_keys),
+                                       pqi_air_pen_gpio_keys);
+
+       /* enable usb */
+       ath79_register_usb();
+       
+       /* register eth0 as LAN */
+       ath79_init_mac(ath79_eth0_data.mac_addr, art + PQI_AIR_PEN_LAN_MAC_OFFSET, 0);
+       ath79_register_mdio(0, 0x0);
+       ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_PQI_AIR_PEN, "PQI-AIR-PEN", "PQI Air Pen",pqi_air_pen_setup);
index b7946e5..857d0ee 100644 (file)
@@ -141,6 +141,7 @@ enum ath79_mach_type {
        ATH79_MACH_ONION_OMEGA,                 /* ONION OMEGA */
        ATH79_MACH_PB42,                        /* Atheros PB42 */
        ATH79_MACH_PB44,                        /* Atheros PB44 reference board */
+       ATH79_MACH_PQI_AIR_PEN,                 /* PQI Air Pen */
        ATH79_MACH_QIHOO_C301,                  /* Qihoo 360 C301 */
        ATH79_MACH_R6100,                       /* NETGEAR R6100 */
        ATH79_MACH_RB_2011G,                    /* Mikrotik RouterBOARD 2011UAS-2HnD */
index 1f96a5b..37ee755 100644 (file)
@@ -323,6 +323,17 @@ endef
 
 TARGET_DEVICES += cr5000-nocloud
 
+define Device/pqi-air-pen
+  DEVICE_TITLE := PQI Air Pen
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
+  BOARDNAME = PQI-AIR-PEN
+  IMAGE_SIZE = 7744k
+  CONSOLE = ttyATH0,115200
+  MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(art)ro,64k(NVRAM)ro,7680k(firmware),64k(CONF)
+endef
+
+TARGET_DEVICES += pqi-air-pen
+
 define Device/antminer-s1
   $(Device/tplink-8mlzma)
   DEVICE_TITLE := Antminer-S1