x86: Move Traverse Geos configs into x86 base-files

This change moves the files in 657418d to the root of the x86 target.
This is done in preperation for adding more devices under other
subtargets.

CC: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>

diff --git a/target/linux/x86/base-files/etc/board.d/01_leds b/target/linux/x86/base-files/etc/board.d/01_leds
new file mode 100755 (executable)
index 0000000..8a1a1e0
--- /dev/null
+++ b/target/linux/x86/base-files/etc/board.d/01_leds
@@ -0,0 +1,21 @@
+#!/bin/sh
+#
+# Copyright © 2017 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(cat /tmp/sysinfo/board_name) 2>/dev/null
+
+case "$board" in
+traverse-technologies-geos)
+       ucidef_set_led_netdev "lan" "LAN" "geos:1" "br-lan" "tx rx"
+       ucidef_set_led_netdev "wlan" "WiFi" "geos:2" "phy0tpt"
+       ucidef_set_led_default "diag" "DIAG" "geos:3" "0"
+       ;;
+esac
+board_config_flush
+
+exit 0

diff --git a/target/linux/x86/base-files/etc/board.d/02_network b/target/linux/x86/base-files/etc/board.d/02_network
new file mode 100755 (executable)
index 0000000..dcce0fa
--- /dev/null
+++ b/target/linux/x86/base-files/etc/board.d/02_network
@@ -0,0 +1,24 @@
+#!/bin/sh
+#
+# Copyright © 2017 OpenWrt.org
+#
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board="$(cat /tmp/sysinfo/board_name)" 2>/dev/null
+
+case "$board" in
+traverse-technologies-geos)
+       ucidef_set_interface_lan "eth0 eth1"
+       ucidef_add_atm_bridge "0" "35" "llc" "bridged"
+       ucidef_set_interface_wan "nas0" "dhcp"
+       macaddr="$(cat /sys/class/net/eth0/address)" 2>/dev/null
+       [ -n "$macaddr" ] && ucidef_set_interface_macaddr "wan" "$macaddr"
+       ;;
+esac
+board_config_flush
+
+exit 0

diff --git a/target/linux/x86/geode/base-files/etc/board.d/01_leds b/target/linux/x86/geode/base-files/etc/board.d/01_leds
deleted file mode 100755 (executable)
index 8a1a1e0..0000000
--- a/target/linux/x86/geode/base-files/etc/board.d/01_leds
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# Copyright © 2017 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(cat /tmp/sysinfo/board_name) 2>/dev/null
-
-case "$board" in
-traverse-technologies-geos)
-       ucidef_set_led_netdev "lan" "LAN" "geos:1" "br-lan" "tx rx"
-       ucidef_set_led_netdev "wlan" "WiFi" "geos:2" "phy0tpt"
-       ucidef_set_led_default "diag" "DIAG" "geos:3" "0"
-       ;;
-esac
-board_config_flush
-
-exit 0

diff --git a/target/linux/x86/geode/base-files/etc/board.d/02_network b/target/linux/x86/geode/base-files/etc/board.d/02_network
deleted file mode 100755 (executable)
index dcce0fa..0000000
--- a/target/linux/x86/geode/base-files/etc/board.d/02_network
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/bin/sh
-#
-# Copyright © 2017 OpenWrt.org
-#
-
-. /lib/functions/system.sh
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board="$(cat /tmp/sysinfo/board_name)" 2>/dev/null
-
-case "$board" in
-traverse-technologies-geos)
-       ucidef_set_interface_lan "eth0 eth1"
-       ucidef_add_atm_bridge "0" "35" "llc" "bridged"
-       ucidef_set_interface_wan "nas0" "dhcp"
-       macaddr="$(cat /sys/class/net/eth0/address)" 2>/dev/null
-       [ -n "$macaddr" ] && ucidef_set_interface_macaddr "wan" "$macaddr"
-       ;;
-esac
-board_config_flush
-
-exit 0