target: ar71xx: add support for COMFAST CF-E316N v2 board
authorFelix Fietkau <nbd@openwrt.org>
Fri, 11 Sep 2015 16:31:35 +0000 (16:31 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Fri, 11 Sep 2015 16:31:35 +0000 (16:31 +0000)
This adds full support (sans sysupgrading from vendor firmware) for the COMFAST
CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by
Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is
actively refusing to provide GPL'd sources for the OpenWrt version they ship
with the device, damn them).

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 46852

12 files changed:
target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-4.1
target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c [new file with mode: 0644]
target/linux/ar71xx/generic/profiles/comfast.mk [new file with mode: 0644]
target/linux/ar71xx/image/Makefile
target/linux/ar71xx/patches-4.1/509-MIPS-ath79-process-board-kernel-option.patch
target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-blackswift.patch
target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch

index 36de775..1b1f6c7 100644 (file)
@@ -56,6 +56,9 @@ get_status_led() {
        cap4200ag)
                status_led="senao:green:pwr"
                ;;
+       cf-e316n-v2)
+               status_led="$(ar71xx_board_name):blue:wan"
+               ;;
        cpe510)
                status_led="tp-link:green:link4"
                ;;
index e7f7a4c..6ecc0e2 100644 (file)
@@ -96,6 +96,12 @@ carambola2)
        ucidef_set_led_wlan "wlan" "WLAN" "carambola2:green:wlan" "phy0tpt"
        ;;
 
+cf-e316n-v2)
+       ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0"
+       ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
+       ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
+       ;;
+
 cpe510)
        ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
        ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
index e1f345e..d495940 100755 (executable)
@@ -392,6 +392,9 @@ ar71xx_board_detect() {
        *CAP4200AG)
                name="cap4200ag"
                ;;
+       *"COMFAST CF-E316N v2")
+               name="cf-e316n-v2"
+               ;;
        *"CPE210/220/510/520")
                name="cpe510"
                tplink_pharos_board_detect
index c1962e4..673ee4e 100755 (executable)
@@ -199,6 +199,7 @@ platform_check_image() {
        ap81 | \
        ap83 | \
        ap132 | \
+       cf-e316n-v2 | \
        dgl-5500-a1 |\
        dhp-1565-a1 |\
        dir-505-a1 | \
index 21c4601..97cbc13 100644 (file)
@@ -50,6 +50,7 @@ CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
 CONFIG_ATH79_MACH_BSB=y
 CONFIG_ATH79_MACH_CAP4200AG=y
 CONFIG_ATH79_MACH_CARAMBOLA2=y
+CONFIG_ATH79_MACH_CF_E316N_V2=y
 CONFIG_ATH79_MACH_CPE510=y
 CONFIG_ATH79_MACH_DB120=y
 CONFIG_ATH79_MACH_DGL_5500_A1=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c
new file mode 100644 (file)
index 0000000..cf3d33a
--- /dev/null
@@ -0,0 +1,132 @@
+/*
+ *  COMFAST CF-E316N v2
+ *  by Shenzhen Four Seas Global Link Network Technology Co., Ltd
+ *
+ *  aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0 (no FCC ID)
+ *
+ *  Copyright (C) 2015 Paul Fertser <fercerpav@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/timer.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+static struct gpio_led cf_e316n_v2_leds_gpio[] __initdata = {
+       {
+               .name           = "cf-e316n-v2:blue:diag",
+               .gpio           = 0,
+               .active_low     = 0,
+       }, {
+               .name           = "cf-e316n-v2:red:diag",
+               .gpio           = 2,
+               .active_low     = 0,
+       }, {
+               .name           = "cf-e316n-v2:green:diag",
+               .gpio           = 3,
+               .active_low     = 0,
+       }, {
+               .name           = "cf-e316n-v2:blue:wlan",
+               .gpio           = 12,
+               .active_low     = 1,
+       }, {
+               .name           = "cf-e316n-v2:blue:wan",
+               .gpio           = 17,
+               .active_low     = 1,
+       }, {
+               .name           = "cf-e316n-v2:blue:lan",
+               .gpio           = 19,
+               .active_low     = 1,
+       },
+};
+
+static struct gpio_keys_button cf_e316n_v2_gpio_keys[] __initdata = {
+       {
+               .desc           = "Reset button",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .debounce_interval = 60,
+               .gpio           = 20,
+               .active_low     = 1,
+       },
+};
+
+/* There's a Pericon Technology PT7A7514 connected to GPIO 16 */
+#define EXT_WATCHDOG_GPIO      16
+static struct timer_list gpio_wdt_timer;
+
+static void gpio_wdt_toggle(unsigned long period)
+{
+       static int state;
+       state = !state;
+       gpio_set_value(EXT_WATCHDOG_GPIO, state);
+       mod_timer(&gpio_wdt_timer, jiffies + period);
+}
+
+static void __init cf_e316n_v2_setup(void)
+{
+       u8 *maclan = (u8 *) KSEG1ADDR(0x1f010000);
+       u8 *macwlan = (u8 *) KSEG1ADDR(0x1f011002);
+       u8 *ee = (u8 *) KSEG1ADDR(0x1f011000);
+       u8 tmpmac[ETH_ALEN];
+
+       gpio_request(EXT_WATCHDOG_GPIO, "PT7A7514 watchdog");
+       gpio_direction_output(EXT_WATCHDOG_GPIO, 0);
+       setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, msecs_to_jiffies(500));
+       gpio_wdt_toggle(msecs_to_jiffies(1));
+
+       ath79_register_m25p80(NULL);
+
+       ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
+       ath79_register_mdio(1, 0x0);
+
+       /* GMAC0 is connected to the PHY0 of the internal switch */
+       ath79_switch_data.phy4_mii_en = 1;
+       ath79_switch_data.phy_poll_mask = BIT(0);
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+       ath79_eth0_data.phy_mask = BIT(0);
+       ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+       ath79_init_mac(ath79_eth0_data.mac_addr, maclan, 0);
+       ath79_register_eth(0);
+
+       /* GMAC1 is connected to the internal switch */
+       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+       ath79_init_mac(ath79_eth1_data.mac_addr, maclan, 2);
+       ath79_register_eth(1);
+
+       /* Enable 2x Skyworks SE2576L WLAN power amplifiers */
+       gpio_request(13, "RF Amp 1");
+       gpio_direction_output(13, 1);
+       gpio_request(14, "RF Amp 2");
+       gpio_direction_output(14, 1);
+       ath79_init_mac(tmpmac, macwlan, 0);
+       ath79_register_wmac(ee, tmpmac);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e316n_v2_leds_gpio),
+                                cf_e316n_v2_leds_gpio);
+
+       ath79_register_gpio_keys_polled(1, 20,
+                                       ARRAY_SIZE(cf_e316n_v2_gpio_keys),
+                                       cf_e316n_v2_gpio_keys);
+
+       /* J1 is a High-Speed USB port, pin 1 is Vcc */
+       ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_CF_E316N_V2, "CF-E316N-V2", "COMFAST CF-E316N v2",
+            cf_e316n_v2_setup);
diff --git a/target/linux/ar71xx/generic/profiles/comfast.mk b/target/linux/ar71xx/generic/profiles/comfast.mk
new file mode 100644 (file)
index 0000000..5d447e5
--- /dev/null
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/CF-E316N-V2
+        NAME:=COMFAST CF-E316N v2
+        PACKAGES:=
+endef
+
+define Profile/CF-E316N-V2/Description
+        Package set optimised for the COMFAST CF-E316N v2
+        by Shenzhen Four Seas Global Link Network Technology Co., Ltd
+        aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0 (no FCC ID)
+endef
+
+$(eval $(call Profile,CF-E316N-V2))
index e6fe36a..71f7ef3 100644 (file)
@@ -179,6 +179,14 @@ define Device/carambola2
 endef
 TARGET_DEVICES += carambola2
 
+define Device/cf-e316n-v2
+  BOARDNAME = CF-E316N-V2
+  IMAGE_SIZE = 16192k
+  CONSOLE = ttyS0,115200
+  MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(nvram)ro
+endef
+TARGET_DEVICES += cf-e316n-v2
+
 define Device/wndr3700
   BOARDNAME = WNDR3700
   NETGEAR_KERNEL_MAGIC = 0x33373030
index 13ff166..2366c40 100644 (file)
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/setup.c
 +++ b/arch/mips/ath79/setup.c
-@@ -237,6 +237,8 @@ void __init plat_time_init(void)
+@@ -236,6 +236,8 @@ void __init plat_time_init(void)
        mips_hpt_frequency = cpu_clk_rate / 2;
  }
  
index 02ebd1b..93f5195 100644 (file)
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -16,24 +16,207 @@
+@@ -16,24 +16,208 @@
  
  enum ath79_mach_type {
        ATH79_MACH_GENERIC = 0,
@@ -28,6 +28,7 @@
 +      ATH79_MACH_BHU_BXU2000N2_A1,    /* BHU BXU2000n-2 A1 */
 +      ATH79_MACH_CAP4200AG,           /* Senao CAP4200AG */
 +      ATH79_MACH_CARAMBOLA2,          /* 8devices Carambola2 */
++      ATH79_MACH_CF_E316N_V2,         /* COMFAST CF-E316N v2 */
 +      ATH79_MACH_CPE510,              /* TP-LINK CPE510 */
        ATH79_MACH_DB120,               /* Atheros DB120 reference board */
        ATH79_MACH_PB44,                /* Atheros PB44 reference board */
  
  config ATH79_MACH_UBNT_XM
        bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +1212,97 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +1212,107 @@ config ATH79_MACH_UBNT_XM
          Say 'Y' here if you want your kernel to support the
          Ubiquiti Networks XM (rev 1.0) board.
  
 +      select ATH79_DEV_USB
 +      select ATH79_DEV_WMAC
 +
++config ATH79_MACH_CF_E316N_V2
++      bool "COMFAST CF-E316N v2 board"
++      select SOC_AR934X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
 +config ATH79_MACH_BHU_BXU2000N2_A
 +      bool "BHU BXU2000n-2 rev. A support"
 +      select SOC_AR934X
  endmenu
  
  config SOC_AR71XX
-@@ -134,7 +1354,10 @@ config ATH79_DEV_DSA
+@@ -134,7 +1364,10 @@ config ATH79_DEV_DSA
  config ATH79_DEV_ETH
        def_bool n
  
        def_bool n
  
  config ATH79_DEV_GPIO_BUTTONS
-@@ -164,6 +1387,11 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -164,6 +1397,11 @@ config ATH79_PCI_ATH9K_FIXUP
        def_bool n
  
  config ATH79_ROUTERBOOT
  endif
 --- a/arch/mips/ath79/Makefile
 +++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,133 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)             += route
+@@ -38,9 +38,134 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)             += route
  #
  # Machines
  #
 +obj-$(CONFIG_ATH79_MACH_AW_NR580)     += mach-aw-nr580.o
 +obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
 +obj-$(CONFIG_ATH79_MACH_CAP4200AG)    += mach-cap4200ag.o
++obj-$(CONFIG_ATH79_MACH_CF_E316N_V2)  += mach-cf-e316n-v2.o
 +obj-$(CONFIG_ATH79_MACH_CPE510)               += mach-cpe510.o
  obj-$(CONFIG_ATH79_MACH_DB120)                += mach-db120.o
 +obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP)      += mach-dlan-pro-500-wp.o
index 787db80..cc01cd6 100644 (file)
@@ -25,8 +25,8 @@
  obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
 +obj-$(CONFIG_ATH79_MACH_BSB)          += mach-bsb.o
  obj-$(CONFIG_ATH79_MACH_CAP4200AG)    += mach-cap4200ag.o
+ obj-$(CONFIG_ATH79_MACH_CF_E316N_V2)  += mach-cf-e316n-v2.o
  obj-$(CONFIG_ATH79_MACH_CPE510)               += mach-cpe510.o
- obj-$(CONFIG_ATH79_MACH_DB120)                += mach-db120.o
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
 @@ -39,6 +39,7 @@ enum ath79_mach_type {
@@ -36,4 +36,4 @@
 +      ATH79_MACH_BSB,                 /* Smart Electronics Black Swift board */
        ATH79_MACH_CAP4200AG,           /* Senao CAP4200AG */
        ATH79_MACH_CARAMBOLA2,          /* 8devices Carambola2 */
-       ATH79_MACH_CPE510,              /* TP-LINK CPE510 */
+       ATH79_MACH_CF_E316N_V2,         /* COMFAST CF-E316N v2 */
index 036087a..1955bfa 100644 (file)
@@ -20,7 +20,7 @@
        select SOC_AR933X
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -154,6 +154,7 @@ enum ath79_mach_type {
+@@ -155,6 +155,7 @@ enum ath79_mach_type {
        ATH79_MACH_TL_WA901ND_V3,       /* TP-LINK TL-WA901ND v3 */
        ATH79_MACH_TL_WDR3500,          /* TP-LINK TL-WDR3500 */
        ATH79_MACH_TL_WDR4300,          /* TP-LINK TL-WDR4300 */
@@ -30,7 +30,7 @@
        ATH79_MACH_TL_WR1043ND,         /* TP-LINK TL-WR1043ND */
 --- a/arch/mips/ath79/Makefile
 +++ b/arch/mips/ath79/Makefile
-@@ -130,6 +130,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA901ND)        += m
+@@ -131,6 +131,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA901ND)        += m
  obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2)        += mach-tl-wa901nd-v2.o
  obj-$(CONFIG_ATH79_MACH_TL_WDR3500)     += mach-tl-wdr3500.o
  obj-$(CONFIG_ATH79_MACH_TL_WDR4300)     += mach-tl-wdr4300.o