x86: remove legacy script/makefile code for rdc devices
authorFelix Fietkau <nbd@nbd.name>
Thu, 12 May 2016 15:39:04 +0000 (17:39 +0200)
committerFelix Fietkau <nbd@nbd.name>
Thu, 12 May 2016 15:39:04 +0000 (17:39 +0200)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
target/linux/x86/image/Makefile
target/linux/x86/image/mkimg_bifferboard.py [deleted file]
target/linux/x86/image/mkimg_sitecom.pl [deleted file]

index 64a5e05..98c2150 100644 (file)
@@ -181,30 +181,6 @@ define Image/BuildKernel
   endif
 endef
 
   endif
 endef
 
-define Image/Build/Profile/ar525w
-       cp $(KDIR)/bzImage $(KDIR)/bzImage.tmp
-       $(SCRIPT_DIR)/pad_image $(1) $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) 32
-       $(STAGING_DIR_HOST)/bin/airlink -b 1 $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) \
-               $(BIN_DIR)/$(IMG_PREFIX)-$(1)-ar525w.img
-       $(STAGING_DIR_HOST)/bin/airlink -e -b 1 $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) \
-               $(BIN_DIR)/$(IMG_PREFIX)-$(1)-ar525w-web.img
-endef
-
-define Image/Build/Profile/sitecom
-       cp $(KDIR)/bzImage $(KDIR)/bzImage.tmp
-       #32k config data + 20 bytes header + 2 bytes checksum after kernel image
-       $(SCRIPT_DIR)/pad_image $(1) $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) 32790
-       $(TOPDIR)/target/linux/rdc/image/mkimg_sitecom.pl $(KDIR)/bzImage.tmp > $(KDIR)/tmp.img
-       cat $(KDIR)/root.$(1) >> $(KDIR)/tmp.img
-       cp $(KDIR)/tmp.img $(BIN_DIR)/$(IMG_PREFIX)-$(1)-sitecom.img
-       rm $(KDIR)/tmp.img $(KDIR)/bzImage.tmp
-endef
-
-define Image/Build/Profile/bifferboard
-       $(TOPDIR)/target/linux/rdc/image/mkimg_bifferboard.py $(KDIR)/bzImage $(KDIR)/root.$(1) \
-               $(BIN_DIR)/$(IMG_PREFIX)-$(1)-bifferboard.img
-endef
-
 define Image/Prepare
        $(call Image/Prepare/grub2)
 endef
 define Image/Prepare
        $(call Image/Prepare/grub2)
 endef
diff --git a/target/linux/x86/image/mkimg_bifferboard.py b/target/linux/x86/image/mkimg_bifferboard.py
deleted file mode 100755 (executable)
index 5444abe..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/usr/bin/env python
-
-"""
-   Create firmware for 4/8MB Bifferboards, suitable for uploading using
-   either bb_upload8.py or bb_eth_upload8.py
-"""
-
-import struct, sys
-
-# Increase the kmax value if the script gives errors about the kernel being 
-# too large.  You need to set the Biffboot kmax value to the same value you
-# use here.
-kmax = 0x10
-
-# No need to change this for 4MB devices, it's only used to tell you if 
-# the firmware is too large!
-flash_size = 0x800000
-
-# This is always the same, for 1MB, 4MB and 8MB devices
-config_extent = 0x6000
-
-kernel_extent = kmax * 0x10000
-
-if __name__ == "__main__":
-
-  if len(sys.argv) != 4:
-    print  "usage: mkimg_bifferboard.py <kernel> <rootfs> <output file>"
-    sys.exit(-1)
-    
-  bzimage = sys.argv[1]
-  rootfs = sys.argv[2]
-  target = sys.argv[3]
-
-  # Kernel first
-  fw = file(bzimage).read()
-  if len(fw) > (kernel_extent - config_extent):
-    raise IOError("Kernel too large")
-
-  # Pad up to end of kernel partition
-  while len(fw) < (kernel_extent - config_extent):
-    fw += "\xff"
-
-  fw += file(rootfs).read()
-
-  # Check length of total
-  if len(fw) > (flash_size - 0x10000 - config_extent):
-    raise IOError("Rootfs too large")
-
-  file(target,"wb").write(fw)
-  print "Firmware written to '%s'" % target
diff --git a/target/linux/x86/image/mkimg_sitecom.pl b/target/linux/x86/image/mkimg_sitecom.pl
deleted file mode 100755 (executable)
index cfd5e65..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/usr/bin/perl
-
-open (bzimg, @ARGV[0]);
-while (<bzimg>) { $i .= $_; }
-$i .= pack "v", -(unpack "%v*", $i); 
-print "CSYS";
-print pack("V", length($i));
-print pack("V", 0);
-print "WRRM";
-print pack("V", length($i));
-print $i;