ar71xx: remove AP113 reference design board support
authorFelix Fietkau <nbd@nbd.name>
Fri, 9 Dec 2016 13:26:12 +0000 (14:26 +0100)
committerFelix Fietkau <nbd@nbd.name>
Mon, 12 Dec 2016 09:22:18 +0000 (10:22 +0100)
Due to flash size limitations, support for this board has not been
functional for years

Signed-off-by: Felix Fietkau <nbd@nbd.name>
12 files changed:
target/linux/ar71xx/base-files/etc/board.d/01_leds
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-4.4
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c [deleted file]
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/mikrotik/config-default
target/linux/ar71xx/nand/config-default

index 38e665f..dcdaab0 100755 (executable)
@@ -45,7 +45,6 @@ arduino-yun)
        ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
        ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
        ;;
-ap113|\
 db120)
        ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
        ;;
index f287d4b..440e00f 100755 (executable)
@@ -146,7 +146,6 @@ ar71xx_setup_interfaces()
        ubnt-unifi-outdoor)
                ucidef_set_interface_lan "eth0 eth1"
                ;;
-       ap113|\
        pb92|\
        wzr-hp-g300nh2)
                ucidef_add_switch "switch0" \
index ffab8eb..cf84dad 100755 (executable)
@@ -435,9 +435,6 @@ ar71xx_board_detect() {
        *"Arduino Yun")
                name="arduino-yun"
                ;;
-       *AP113)
-               name="ap113"
-               ;;
        *"AP121 reference board")
                name="ap121"
                ;;
index 0100d27..b028cd3 100755 (executable)
@@ -261,7 +261,6 @@ platform_check_image() {
                ;;
        alfa-ap96|\
        alfa-nx|\
-       ap113|\
        ap121-mini|\
        ap121|\
        ap135-020|\
index e83e668..5e0275a 100644 (file)
@@ -40,7 +40,6 @@ CONFIG_ATH79_MACH_ALL0315N=y
 CONFIG_ATH79_MACH_ANTMINER_S1=y
 CONFIG_ATH79_MACH_ANTMINER_S3=y
 CONFIG_ATH79_MACH_ANTROUTER_R1=y
-CONFIG_ATH79_MACH_AP113=y
 CONFIG_ATH79_MACH_AP121=y
 CONFIG_ATH79_MACH_AP132=y
 CONFIG_ATH79_MACH_AP136=y
index a0f24e1..4d82db2 100644 (file)
@@ -103,16 +103,6 @@ config ATH79_MACH_ARDUINO_YUN
          Say 'Y' here if you want your kernel to support the
          Arduino Yun.
 
-config ATH79_MACH_AP113
-       bool "Atheros AP113 board support"
-       select SOC_AR724X
-       select ATH79_DEV_M25P80
-       select ATH79_DEV_PB9X_PCI if PCI
-       select ATH79_DEV_GPIO_BUTTONS
-       select ATH79_DEV_LEDS_GPIO
-       select ATH79_DEV_USB
-       select ATH79_DEV_ETH
-
 config ATH79_MACH_AP132
        bool "Atheros AP132 reference board"
        select SOC_QCA955X
index 03ca101..a39e8d2 100644 (file)
@@ -46,7 +46,6 @@ obj-$(CONFIG_ATH79_MACH_ALL0315N)             += mach-all0315n.o
 obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)           += mach-antminer-s1.o
 obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)           += mach-antminer-s3.o
 obj-$(CONFIG_ATH79_MACH_ANTROUTER_R1)          += mach-antrouter-r1.o
-obj-$(CONFIG_ATH79_MACH_AP113)                 += mach-ap113.o
 obj-$(CONFIG_ATH79_MACH_AP121)                 += mach-ap121.o
 obj-$(CONFIG_ATH79_MACH_AP132)                 += mach-ap132.o
 obj-$(CONFIG_ATH79_MACH_AP136)                 += mach-ap136.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c
deleted file mode 100644 (file)
index 9b38faa..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *  Atheros AP113 board support
- *
- *  Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "pci.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define AP113_GPIO_LED_USB             0
-#define AP113_GPIO_LED_STATUS          1
-#define AP113_GPIO_LED_ST              11
-
-#define AP113_GPIO_BTN_JUMPSTART       12
-
-#define AP113_KEYS_POLL_INTERVAL       20      /* msecs */
-#define AP113_KEYS_DEBOUNCE_INTERVAL   (3 * AP113_KEYS_POLL_INTERVAL)
-
-static struct gpio_led ap113_leds_gpio[] __initdata = {
-       {
-               .name           = "ap113:green:usb",
-               .gpio           = AP113_GPIO_LED_USB,
-               .active_low     = 1,
-       },
-       {
-               .name           = "ap113:green:status",
-               .gpio           = AP113_GPIO_LED_STATUS,
-               .active_low     = 1,
-       },
-       {
-               .name           = "ap113:green:st",
-               .gpio           = AP113_GPIO_LED_ST,
-               .active_low     = 1,
-       }
-};
-
-static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
-       {
-               .desc           = "jumpstart button",
-               .type           = EV_KEY,
-               .code           = KEY_WPS_BUTTON,
-               .debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = AP113_GPIO_BTN_JUMPSTART,
-               .active_low     = 1,
-       },
-};
-
-static void __init ap113_setup(void)
-{
-       u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-
-       ath79_register_m25p80(NULL);
-
-       ath79_register_mdio(0, ~BIT(0));
-       ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-       ath79_eth0_data.speed = SPEED_1000;
-       ath79_eth0_data.duplex = DUPLEX_FULL;
-       ath79_eth0_data.phy_mask = BIT(0);
-
-       ath79_register_eth(0);
-
-       ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
-                                        ARRAY_SIZE(ap113_gpio_keys),
-                                        ap113_gpio_keys);
-       ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
-                                       ap113_leds_gpio);
-
-       ath79_register_pci();
-
-       ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113",
-            ap113_setup);
index cd26598..5893790 100644 (file)
@@ -26,7 +26,6 @@ enum ath79_mach_type {
        ATH79_MACH_ANTMINER_S1,                 /* Antminer S1 */
        ATH79_MACH_ANTMINER_S3,                 /* Antminer S3 */
        ATH79_MACH_ANTROUTER_R1,                /* Antrouter R1 */
-       ATH79_MACH_AP113,                       /* Atheros AP113 reference board */
        ATH79_MACH_AP121,                       /* Atheros AP121 reference board */
        ATH79_MACH_AP121_MINI,                  /* Atheros AP121-MINI reference board */
        ATH79_MACH_AP132,                       /* Atheros AP132 reference board */
index 3d5d20d..aa898ee 100644 (file)
@@ -4,7 +4,6 @@
 # CONFIG_ATH79_MACH_ALL0258N is not set
 # CONFIG_ATH79_MACH_ALL0315N is not set
 # CONFIG_ATH79_MACH_ANTMINER_S1 is not set
-# CONFIG_ATH79_MACH_AP113 is not set
 # CONFIG_ATH79_MACH_AP121 is not set
 # CONFIG_ATH79_MACH_AP132 is not set
 # CONFIG_ATH79_MACH_AP136 is not set
index 1c3a650..49480f2 100644 (file)
@@ -3,7 +3,6 @@
 # CONFIG_ATH79_MACH_ALFA_NX is not set
 # CONFIG_ATH79_MACH_ALL0258N is not set
 # CONFIG_ATH79_MACH_ALL0315N is not set
-# CONFIG_ATH79_MACH_AP113 is not set
 # CONFIG_ATH79_MACH_AP121 is not set
 # CONFIG_ATH79_MACH_AP132 is not set
 # CONFIG_ATH79_MACH_AP136 is not set