ramips: change the TP-Link dtsi filename

Signed-off-by: Henryk Heisig <hyniu@o2.pl>

diff --git a/target/linux/ramips/dts/TL-MR3420V5.dts b/target/linux/ramips/dts/TL-MR3420V5.dts
index fdb09dcd6ef1fb7fc763b0e311cdb65ac73d49bd..397b2e169914f4953f1763932d983675d963c41e 100644 (file)
--- a/target/linux/ramips/dts/TL-MR3420V5.dts
+++ b/target/linux/ramips/dts/TL-MR3420V5.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
 /dts-v1/;
 

-#include "TL-WR84XN.dtsi"
+#include "TPLINK-8M.dtsi"

 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>

diff --git a/target/linux/ramips/dts/TL-WR840NV4.dts b/target/linux/ramips/dts/TL-WR840NV4.dts
index f139483a48599652621a0d9bb65b94f3f609517f..09952e7a7aae5a1a3c82fd5c74b3d8818e2ecc0d 100644 (file)
--- a/target/linux/ramips/dts/TL-WR840NV4.dts
+++ b/target/linux/ramips/dts/TL-WR840NV4.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
 /dts-v1/;
 

-#include "TL-WR84XN.dtsi"
+#include "TPLINK-8M.dtsi"

 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>

diff --git a/target/linux/ramips/dts/TL-WR841NV13.dts b/target/linux/ramips/dts/TL-WR841NV13.dts
index 40f833ced3c0f1c3c4c42a83b62e2f931f94412f..e552b47034275a55aafa2966610709fb30568b9b 100644 (file)
--- a/target/linux/ramips/dts/TL-WR841NV13.dts
+++ b/target/linux/ramips/dts/TL-WR841NV13.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
 /dts-v1/;
 

-#include "TL-WR84XN.dtsi"
+#include "TPLINK-8M.dtsi"

 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>

diff --git a/target/linux/ramips/dts/TL-WR84XN.dtsi b/target/linux/ramips/dts/TL-WR84XN.dtsi
deleted file mode 100644 (file)
index c9d0cdd..0000000
--- a/target/linux/ramips/dts/TL-WR84XN.dtsi
+++ /dev/null
@@ -1,67 +0,0 @@
-#include "mt7628an.dtsi"
-
-/ {
-       chosen {
-               bootargs = "console=ttyS0,115200";
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;
-       };
-};
-
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-               m25p,chunked-io = <32>;
-
-               partition@0 {
-                       label = "boot";
-                       reg = <0x0 0x20000>;
-                       read-only;
-               };
-
-               partition@20000 {
-                       label = "firmware";
-                       reg = <0x20000 0x7a0000>;
-               };
-
-               partition@7c0000 {
-                       label = "config";
-                       reg = <0x7c0000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@7d0000 {
-                       label = "factory";
-                       reg = <0x7d0000 0x30000>;
-                       read-only;
-               };
-       };
-};
-
-&ehci {
-       status = "disabled";
-};
-
-&ohci {
-       status = "disabled";
-};
-
-&wmac {
-       status = "okay";
-       mtd-mac-address = <&factory 0xf100>;
-       mediatek,mtd-eeprom = <&factory 0x20000>;
-};
-
-&ethernet {
-       mtd-mac-address = <&factory 0xf100>;
-       mediatek,portmap = "llllw";
-};

diff --git a/target/linux/ramips/dts/TPLINK-8M.dtsi b/target/linux/ramips/dts/TPLINK-8M.dtsi
new file mode 100644 (file)
index 0000000..c9d0cdd
--- /dev/null
+++ b/target/linux/ramips/dts/TPLINK-8M.dtsi
@@ -0,0 +1,67 @@
+#include "mt7628an.dtsi"
+
+/ {
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+               m25p,chunked-io = <32>;
+
+               partition@0 {
+                       label = "boot";
+                       reg = <0x0 0x20000>;
+                       read-only;
+               };
+
+               partition@20000 {
+                       label = "firmware";
+                       reg = <0x20000 0x7a0000>;
+               };
+
+               partition@7c0000 {
+                       label = "config";
+                       reg = <0x7c0000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@7d0000 {
+                       label = "factory";
+                       reg = <0x7d0000 0x30000>;
+                       read-only;
+               };
+       };
+};
+
+&ehci {
+       status = "disabled";
+};
+
+&ohci {
+       status = "disabled";
+};
+
+&wmac {
+       status = "okay";
+       mtd-mac-address = <&factory 0xf100>;
+       mediatek,mtd-eeprom = <&factory 0x20000>;
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0xf100>;
+       mediatek,portmap = "llllw";
+};