ipq40xx: add MikroTik hAP ac2 support
authorRobert Marko <robimarko@gmail.com>
Thu, 12 Nov 2020 18:45:22 +0000 (19:45 +0100)
committerBaptiste Jonglez <git@bitsofnetworks.org>
Mon, 3 May 2021 12:57:29 +0000 (14:57 +0200)
This adds support for the MikroTik RouterBOARD RBD52G-5HacD2HnD-TC
(hAP ac²), a  indoor dual band, dual-radio 802.11ac
wireless AP with integrated omnidirectional antennae, USB port and  five
10/100/1000 Mbps Ethernet ports.

See https://mikrotik.com/product/hap_ac2 for more info.

Specifications:
 - SoC: Qualcomm Atheros IPQ4018
 - RAM: 128 MB
 - Storage: 16 MB NOR
 - Wireless:
   · Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae
   · Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae
 - Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 5x 1000/100/10 port,
             passive PoE in
- 1x USB Type A port

Installation:
Boot the initramfs image via TFTP and then flash the sysupgrade
image using "sysupgrade -n"

Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit faea7becafc634dc882f0ad8f9388862ccd5bd0d)
[Compile Tested]
Signed-off-by: Nick Hainke <vincent@systemli.org>
package/firmware/ipq-wifi/Makefile
package/firmware/ipq-wifi/board-mikrotik_hap-ac2.qca4019 [new file with mode: 0644]
target/linux/ipq40xx/base-files/etc/board.d/02_network
target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts [new file with mode: 0644]
target/linux/ipq40xx/image/mikrotik.mk
target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch

index e5f10a1..7703604 100644 (file)
@@ -43,6 +43,7 @@ ALLWIFIBOARDS:= \
        linksys_ea8300 \
        linksys_mr8300-v0 \
        luma_wrtq-329acn \
+       mikrotik_hap-ac2 \
        mobipromo_cm520-79f \
        nec_wg2600hp3 \
        plasmacloud_pa1200 \
@@ -126,6 +127,7 @@ $(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
 $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
 $(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
 $(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
+$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac2,Mikrotik hAP ac2))
 $(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
 $(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3))
 $(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
diff --git a/package/firmware/ipq-wifi/board-mikrotik_hap-ac2.qca4019 b/package/firmware/ipq-wifi/board-mikrotik_hap-ac2.qca4019
new file mode 100644 (file)
index 0000000..73372c1
Binary files /dev/null and b/package/firmware/ipq-wifi/board-mikrotik_hap-ac2.qca4019 differ
index fe21dc8..515fa11 100755 (executable)
@@ -48,6 +48,7 @@ ipq40xx_setup_interfaces()
                ucidef_set_interfaces_lan_wan "eth1" "eth0"
                ;;
        asus,rt-ac58u|\
+       mikrotik,hap-ac2|\
        zyxel,nbg6617)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ucidef_add_switch "switch0" \
@@ -170,6 +171,11 @@ ipq40xx_setup_macs()
                wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
                lan_mac=$(macaddr_add "$wan_mac" 1)
                ;;
+       mikrotik,hap-ac2)
+               wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+               lan_mac=$(macaddr_add $wan_mac 1)
+               label_mac="$wan_mac"
+               ;;
        esac
 
        [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
index c4d9dd7..0e027dd 100644 (file)
@@ -140,6 +140,11 @@ case "$FIRMWARE" in
                caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
                ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
                ;;
+       mikrotik,hap-ac2)
+               wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+               ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
+               ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
+               ;;
        netgear,ex6100v2 |\
        netgear,ex6150v2)
                caldata_extract "ART" 0x1000 0x2f20
@@ -244,6 +249,11 @@ case "$FIRMWARE" in
                caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
                ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
                ;;
+       mikrotik,hap-ac2)
+               wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+               ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
+               ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
+               ;;
        netgear,ex6100v2 |\
        netgear,ex6150v2)
                caldata_extract "ART" 0x5000 0x2f20
index 5582696..c94b4d8 100644 (file)
@@ -111,6 +111,10 @@ platform_do_upgrade() {
                CI_KERNPART="part.safe"
                nand_do_upgrade "$1"
                ;;
+       mikrotik,hap-ac2)
+               [ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
+               default_do_upgrade "$1"
+               ;;
        openmesh,a42 |\
        openmesh,a62 |\
        plasmacloud,pa1200 |\
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts
new file mode 100644 (file)
index 0000000..e1e6326
--- /dev/null
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+       model = "MikroTik hAP ac2";
+       compatible = "mikrotik,hap-ac2";
+
+       memory {
+               device_type = "memory";
+               reg = <0x80000000 0x08000000>;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       aliases {
+               led-boot = &led_user;
+               led-failsafe = &led_user;
+               led-running = &led_user;
+               led-upgrade = &led_user;
+       };
+
+       soc {
+               rng@22000 {
+                       status = "okay";
+               };
+
+               counter@4a1000 {
+                       compatible = "qcom,qca-gcnt";
+                       reg = <0x4a1000 0x4>;
+               };
+
+               tcsr@1949000 {
+                       compatible = "qcom,tcsr";
+                       reg = <0x1949000 0x100>;
+                       qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+               };
+
+               tcsr@194b000 {
+                       /* select hostmode */
+                       compatible = "qcom,tcsr";
+                       reg = <0x194b000 0x100>;
+                       qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+                       status = "okay";
+               };
+
+               ess_tcsr@1953000 {
+                       compatible = "qcom,tcsr";
+                       reg = <0x1953000 0x1000>;
+                       qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+               };
+
+               tcsr@1957000 {
+                       compatible = "qcom,tcsr";
+                       reg = <0x1957000 0x100>;
+                       qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+               };
+
+               usb3@8af8800 {
+                       status = "okay";
+
+                       dwc3@8a00000 {
+                               phys = <&usb3_hs_phy>;
+                               phy-names = "usb2-phy";
+                       };
+               };
+
+               crypto@8e3a000 {
+                       status = "okay";
+               };
+
+               watchdog@b017000 {
+                       status = "okay";
+               };
+
+               ess-switch@c000000 {
+                       status = "okay";
+               };
+
+               edma@c080000 {
+                       status = "okay";
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               mode {
+                       label = "mode";
+                       gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power {
+                       label = "green:power";
+                       gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+                       panic-indicator;
+               };
+
+               led_user: user {
+                       label = "green:user";
+                       gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&tlmm {
+       serial_pins: serial_pinmux {
+               mux {
+                       pins = "gpio60", "gpio61";
+                       function = "blsp_uart0";
+                       bias-disable;
+               };
+       };
+
+       spi_0_pins: spi_0_pinmux {
+               pin {
+                       function = "blsp_spi0";
+                       pins = "gpio55", "gpio56", "gpio57";
+                       drive-strength = <2>;
+                       bias-disable;
+               };
+               pin_cs {
+                       function = "gpio";
+                       pins = "gpio54";
+                       drive-strength = <2>;
+                       bias-disable;
+                       output-high;
+               };
+       };
+
+       enable-usb-power {
+               gpio-hog;
+               gpios = <2 GPIO_ACTIVE_HIGH>;
+               output-high;
+               line-name = "enable USB power";
+       };
+};
+
+&blsp_dma {
+       status = "okay";
+};
+
+&blsp1_spi1 {
+       status = "okay";
+
+       pinctrl-0 = <&spi_0_pins>;
+       pinctrl-names = "default";
+       cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+       flash@0 {
+               reg = <0>;
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <40000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "Qualcomm";
+                               reg = <0x0 0x80000>;
+                               read-only;
+                       };
+
+                       partition@80000 {
+                               compatible = "mikrotik,routerboot-partitions";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               label = "RouterBoot";
+                               reg = <0x80000 0x80000>;
+                               read-only;
+
+                               hard_config {
+                                       read-only;
+                               };
+
+                               dtb_config {
+                                       read-only;
+                               };
+
+                               soft_config {
+                               };
+                       };
+
+                       partition@100000 {
+                               compatible = "mikrotik,minor";
+                               label = "firmware";
+                               reg = <0x100000 0xf00000>;
+                       };
+               };
+       };
+};
+
+&blsp1_uart1 {
+       status = "okay";
+
+       pinctrl-0 = <&serial_pins>;
+       pinctrl-names = "default";
+};
+
+&cryptobam {
+       status = "okay";
+};
+
+&usb3_hs_phy {
+       status = "okay";
+};
+
+&mdio {
+       status = "okay";
+};
+
+&ethphy0 {
+       qcom,single-led-1000;
+       qcom,single-led-100;
+       qcom,single-led-10;
+};
+
+&ethphy1 {
+       qcom,single-led-1000;
+       qcom,single-led-100;
+       qcom,single-led-10;
+};
+
+&ethphy2 {
+       qcom,single-led-1000;
+       qcom,single-led-100;
+       qcom,single-led-10;
+};
+
+&ethphy3 {
+       qcom,single-led-1000;
+       qcom,single-led-100;
+       qcom,single-led-10;
+};
+
+&ethphy4 {
+       qcom,single-led-1000;
+       qcom,single-led-100;
+       qcom,single-led-10;
+};
+
+&wifi0 {
+       status = "okay";
+
+       qcom,ath10k-calibration-variant = "MikroTik-hAP-ac2";
+};
+
+&wifi1 {
+       status = "okay";
+
+       qcom,ath10k-calibration-variant = "MikroTik-hAP-ac2";
+};
index e69de29..9509ef8 100644 (file)
@@ -0,0 +1,20 @@
+define Device/mikrotik_nor
+       DEVICE_VENDOR := MikroTik
+       BLOCKSIZE := 64k
+       IMAGE_SIZE := 16128k
+       KERNEL_NAME := vmlinux
+       KERNEL := kernel-bin | append-dtb-elf
+       IMAGES = sysupgrade.bin
+       IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 | \
+               pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
+               append-metadata | check-size
+endef
+
+define Device/mikrotik_hap-ac2
+       $(call Device/mikrotik_nor)
+       DEVICE_MODEL := hAP ac2
+       SOC := qcom-ipq4018
+       DEVICE_PACKAGES := ipq-wifi-mikrotik_hap-ac2 -kmod-ath10k-ct \
+               kmod-ath10k-ct-smallbuffers
+endef
+TARGET_DEVICES += mikrotik_hap-ac2
index a3d3341..6a421b9 100644 (file)
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
 
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -837,11 +837,58 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -837,11 +837,59 @@ dtb-$(CONFIG_ARCH_QCOM) += \
        qcom-apq8074-dragonboard.dtb \
        qcom-apq8084-ifc6540.dtb \
        qcom-apq8084-mtp.dtb \
@@ -31,6 +31,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +      qcom-ipq4018-gl-ap1300.dtb \
 +      qcom-ipq4018-jalapeno.dtb \
 +      qcom-ipq4018-meshpoint-one.dtb \
++      qcom-ipq4018-hap-ac2.dtb \
 +      qcom-ipq4018-nbg6617.dtb \
 +      qcom-ipq4019-oap100.dtb \
 +      qcom-ipq4018-pa1200.dtb \