ar71xx: add support for TP-LINK CPE210/220/510/520
authorJohn Crispin <john@openwrt.org>
Wed, 26 Nov 2014 08:59:32 +0000 (08:59 +0000)
committerJohn Crispin <john@openwrt.org>
Wed, 26 Nov 2014 08:59:32 +0000 (08:59 +0000)
This adds support for the TP-LINK CPE210/220/510/520 (Pharos series). These
devices are very similar to the Ubiquiti NanoStations, but with better specs:
faster CPU, more RAM, 2x2 MIMO.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 43385

target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
target/linux/ar71xx/base-files/etc/uci-defaults/02_network
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-3.14
target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c [new file with mode: 0644]
target/linux/ar71xx/generic/profiles/tp-link.mk
target/linux/ar71xx/image/Makefile
target/linux/ar71xx/patches-3.14/610-MIPS-ath79-openwrt-machines.patch

index 5c1d92f..e39a2b9 100755 (executable)
@@ -43,6 +43,9 @@ get_status_led() {
        cap4200ag)
                status_led="senao:green:pwr"
                ;;
+       cpe510)
+               status_led="tp-link:green:link4"
+               ;;
        db120)
                status_led="db120:green:status"
                ;;
index 4216071..c6ecde5 100755 (executable)
@@ -62,6 +62,16 @@ carambola2)
        ucidef_set_led_wlan "wlan" "WLAN" "carambola2:green:wlan" "phy0tpt"
        ;;
 
+cpe510)
+       ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
+       ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+       ucidef_set_rssimon "wlan0" "40000" "1"
+       ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13"
+       ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13"
+       ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13"
+       ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
+       ;;
+
 db120)
        ucidef_set_led_usbdev "usb" "USB" "db120:green:usb" "1-1"
        ;;
index 872db67..3287e6c 100755 (executable)
@@ -63,6 +63,13 @@ tl-wdr4900-v2)
        ucidef_add_switch_vlan "switch0" "2" "1 6"
        ;;
 
+cpe510)
+       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+       ucidef_add_switch "switch0" "1" "1"
+       ucidef_add_switch_vlan "switch0" "1" "0t 5"
+       ucidef_add_switch_vlan "switch0" "2" "0t 4"
+       ;;
+
 db120 |\
 rb-2011l | \
 rb-2011uas |\
index 8dde6ef..a802258 100755 (executable)
@@ -229,6 +229,39 @@ tplink_board_detect() {
        AR71XX_MODEL="$model $hwver"
 }
 
+tplink_pharos_get_model_string() {
+       local part
+       part=$(find_mtd_part 'product-info')
+       [ -z "$part" ] && return 1
+
+       # The returned string will end with \r\n, but we don't remove it here
+       # to simplify matching against it in the sysupgrade image check
+       dd if=$part bs=1 skip=4360 2>/dev/null | head -n 1
+}
+
+tplink_pharos_board_detect() {
+       local model_string="$(tplink_pharos_get_model_string | tr -d '\r')"
+       local oIFS="$IFS"; IFS=":"; set -- $model_string; IFS="$oIFS"
+       local model
+
+       case "$1" in
+       'CPE210(TP-LINK|UN|N300-2)')
+               model='TP-Link CPE210'
+               ;;
+       'CPE220(TP-LINK|UN|N300-2)')
+               model='TP-Link CPE220'
+               ;;
+       'CPE510(TP-LINK|UN|N300-5)')
+               model='TP-Link CPE510'
+               ;;
+       'CPE520(TP-LINK|UN|N300-5)')
+               model='TP-Link CPE520'
+               ;;
+       esac
+
+       [ -n "$model" ] && AR71XX_MODEL="$model v$2"
+}
+
 ar71xx_board_detect() {
        local machine
        local name
@@ -302,6 +335,10 @@ ar71xx_board_detect() {
        *CAP4200AG)
                name="cap4200ag"
                ;;
+       *"CPE210/220/510/520")
+               name="cpe510"
+               tplink_pharos_board_detect
+               ;;
        *"DB120 reference board")
                name="db120"
                ;;
@@ -775,7 +812,8 @@ ar71xx_board_detect() {
                ;;
        esac
 
-       [ "${machine:0:8}" = 'TP-LINK ' ] && tplink_board_detect "$machine"
+       [ -z "$AR71XX_MODEL" ] && [ "${machine:0:8}" = 'TP-LINK ' ] && \
+               tplink_board_detect "$machine"
 
        [ -z "$name" ] && name="unknown"
 
index 598b33e..6a85d01 100755 (executable)
@@ -70,6 +70,33 @@ tplink_get_image_boot_size() {
        get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
 }
 
+tplink_pharos_check_image() {
+       local magic_long="$(get_magic_long "$1")"
+       [ "$magic_long" != "7f454c46" ] && {
+               echo "Invalid image magic '$magic_long'"
+               return 1
+       }
+
+       local model_string="$(tplink_pharos_get_model_string)"
+       local line
+
+       # Here $1 is given to dd directly instead of get_image as otherwise the skip
+       # will take almost a second (as dd can't seek then)
+       #
+       # This will fail if the image isn't local, but that's fine: as the
+       # read loop won't be executed at all, it will return true, so the image
+       # is accepted (loading the first 1.5M of a remote image for this check seems
+       # a bit extreme)
+       dd if="$1" bs=1 skip=1511432 count=1024 2>/dev/null | while read line; do
+               [ "$line" == "$model_string" ] && break
+       done || {
+               echo "Unsupported image (model not in support-list)"
+               return 1
+       }
+
+       return 0
+}
+
 seama_get_type_magic() {
        get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
 }
@@ -217,6 +244,11 @@ platform_check_image() {
                return 0
                ;;
 
+       cpe510)
+               tplink_pharos_check_image "$1" && return 0
+               return 1
+               ;;
+
        dir-825-b1 | \
        tew-673gru)
                dir825b_check_image "$1" && return 0
index 6d9be23..e5086af 100644 (file)
@@ -40,6 +40,7 @@ CONFIG_ATH79_MACH_AW_NR580=y
 CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
 CONFIG_ATH79_MACH_CAP4200AG=y
 CONFIG_ATH79_MACH_CARAMBOLA2=y
+CONFIG_ATH79_MACH_CPE510=y
 CONFIG_ATH79_MACH_DB120=y
 CONFIG_ATH79_MACH_DHP_1565_A1=y
 CONFIG_ATH79_MACH_DIR_505_A1=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
new file mode 100644 (file)
index 0000000..8bf5c0f
--- /dev/null
@@ -0,0 +1,107 @@
+/*
+ *  TP-LINK CPE210/220/510/520 board support
+ *
+ *  Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+
+#define CPE510_GPIO_LED_LAN0   11
+#define CPE510_GPIO_LED_LAN1   12
+#define CPE510_GPIO_LED_L1     13
+#define CPE510_GPIO_LED_L2     14
+#define CPE510_GPIO_LED_L3     15
+#define CPE510_GPIO_LED_L4     16
+
+#define CPE510_GPIO_BTN_RESET  4
+
+#define CPE510_KEYS_POLL_INTERVAL      20 /* msecs */
+#define CPE510_KEYS_DEBOUNCE_INTERVAL  (3 * CPE510_KEYS_POLL_INTERVAL)
+
+
+static struct gpio_led cpe510_leds_gpio[] __initdata = {
+       {
+               .name           = "tp-link:green:lan0",
+               .gpio           = CPE510_GPIO_LED_LAN0,
+               .active_low     = 1,
+       }, {
+               .name           = "tp-link:green:lan1",
+               .gpio           = CPE510_GPIO_LED_LAN1,
+               .active_low     = 1,
+       }, {
+               .name           = "tp-link:green:link1",
+               .gpio           = CPE510_GPIO_LED_L1,
+               .active_low     = 1,
+       }, {
+               .name           = "tp-link:green:link2",
+               .gpio           = CPE510_GPIO_LED_L2,
+               .active_low     = 1,
+       }, {
+               .name           = "tp-link:green:link3",
+               .gpio           = CPE510_GPIO_LED_L3,
+               .active_low     = 1,
+       }, {
+               .name           = "tp-link:green:link4",
+               .gpio           = CPE510_GPIO_LED_L4,
+               .active_low     = 1,
+       },
+};
+
+static struct gpio_keys_button cpe510_gpio_keys[] __initdata = {
+       {
+               .desc           = "Reset button",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .debounce_interval = CPE510_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = CPE510_GPIO_BTN_RESET,
+               .active_low     = 1,
+       }
+};
+
+
+static void __init cpe510_setup(void)
+{
+       u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
+       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+       /* Disable JTAG, enabling GPIOs 0-3 */
+       /* Configure OBS4 line, for GPIO 4*/
+       ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
+                                 AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe510_leds_gpio),
+                                cpe510_leds_gpio);
+
+       ath79_register_gpio_keys_polled(1, CPE510_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(cpe510_gpio_keys),
+                                       cpe510_gpio_keys);
+
+       ath79_register_m25p80(NULL);
+
+       ath79_register_mdio(1, 0);
+       ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+       ath79_register_eth(1);
+
+       ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE210/220/510/520",
+            cpe510_setup);
index 78333be..a9d170c 100644 (file)
@@ -16,6 +16,17 @@ endef
 $(eval $(call Profile,ARCHERC7))
 
 
+define Profile/CPE510
+       NAME:=TP-LINK CPE210/220/510/520
+       PACKAGES:=rssileds
+endef
+
+define Profile/CPE510/Description
+       Package set optimized for the TP-LINK CPE210/220/510/520.
+endef
+$(eval $(call Profile,CPE510))
+
+
 define Profile/TLMR10U
        NAME:=TP-LINK TL-MR10U
        PACKAGES:=kmod-usb-core kmod-usb2
index 255713a..1c78898 100644 (file)
@@ -276,6 +276,7 @@ cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k
 cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
 cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
 cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware)
+cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
 eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
 db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
 cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
@@ -831,6 +832,32 @@ define Image/Build/TPLINK-LZMA/initramfs
 endef
 
 
+Image/Build/TPLINK-SAFELOADER/buildkernel=$(call PatchKernelLzma,$(2),$(3) $(4))
+
+define Image/Build/TPLINK-SAFELOADER
+       -rm -rf $(KDIR)/lzma-loader
+       $(LOADER_MAKE) LOADER=loader-$(2).elf\
+               LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
+               LOADER_DATA="$(KDIR_TMP)/vmlinux-$(2).bin.lzma" BOARD="$(2)" \
+               compile loader.elf
+
+       -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
+               -B $(5) \
+               -k $(KDIR)/loader-$(2).elf \
+               -r $(KDIR)/root.$(1) \
+               -V $(REVISION) \
+               -j \
+               -o $(call factoryname,$(1),$(2))
+       -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
+               -B $(5) \
+               -k $(KDIR)/loader-$(2).elf \
+               -r $(KDIR)/root.$(1) \
+               -V $(REVISION) \
+               -j -S \
+               -o $(call sysupname,$(1),$(2))
+endef
+
+
 define Image/Build/CyberTAN
        echo -n '' > $(KDIR_TMP)/empty.bin
        $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
@@ -1264,6 +1291,8 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4310V1,tl-wdr4310-v1,TL-WDR4
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4900V2,tl-wdr4900-v2,TL-WDR4900-v2,ttyS0,115200,0x49000002,1,8Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,MW4530RV1,mw4530r-v1,TL-WDR4300,ttyS0,115200,0x45300001,1,8Mlzma))
 
+$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
+
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,SMART-300,smart-300,SMART-300,ttyS0,115200,0x93410001,1,8Mlzma))
 
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,OOLITE,oolite,GS-OOLITE,ttyATH0,115200,0x3C000101,1,16Mlzma))
index 60df54c..4ce9268 100644 (file)
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,144 @@
+@@ -16,22 +16,145 @@
  
  enum ath79_mach_type {
        ATH79_MACH_GENERIC = 0,
@@ -24,6 +24,7 @@
 +      ATH79_MACH_BHU_BXU2000N2_A1,    /* BHU BXU2000n-2 A1 */
 +      ATH79_MACH_CAP4200AG,           /* Senao CAP4200AG */
 +      ATH79_MACH_CARAMBOLA2,          /* 8devices Carambola2 */
++      ATH79_MACH_CPE510,              /* TP-LINK CPE510 */
        ATH79_MACH_DB120,               /* Atheros DB120 reference board */
        ATH79_MACH_PB44,                /* Atheros PB44 reference board */
 +      ATH79_MACH_DIR_505_A1,          /* D-Link DIR-505 rev. A1 */
  config ATH79_MACH_AP121
        bool "Atheros AP121 reference board"
        select SOC_AR933X
-@@ -11,62 +66,734 @@ config ATH79_MACH_AP121
+@@ -11,62 +66,743 @@ config ATH79_MACH_AP121
        select ATH79_DEV_M25P80
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 +      select ATH79_DEV_USB
 +      select ATH79_DEV_WMAC
 +
++config ATH79_MACH_CPE510
++      bool "TP-LINK CPE510 support"
++      select SOC_AR934X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
 +config ATH79_MACH_TL_MR11U
 +      bool "TP-LINK TL-MR11U/TL-MR3040 support"
 +      select SOC_AR933X
  
  config ATH79_MACH_UBNT_XM
        bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +810,65 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +819,65 @@ config ATH79_MACH_UBNT_XM
          Say 'Y' here if you want your kernel to support the
          Ubiquiti Networks XM (rev 1.0) board.
  
  endmenu
  
  config SOC_AR71XX
-@@ -132,7 +918,10 @@ config ATH79_DEV_DSA
+@@ -132,7 +927,10 @@ config ATH79_DEV_DSA
  config ATH79_DEV_ETH
        def_bool n
  
        def_bool n
  
  config ATH79_DEV_GPIO_BUTTONS
-@@ -164,4 +953,7 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -164,4 +962,7 @@ config ATH79_PCI_ATH9K_FIXUP
  config ATH79_ROUTERBOOT
        def_bool n
  
  endif
 --- a/arch/mips/ath79/Makefile
 +++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,90 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)              += route
+@@ -38,9 +38,91 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)              += route
  #
  # Machines
  #
 +obj-$(CONFIG_ATH79_MACH_AW_NR580)     += mach-aw-nr580.o
 +obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
 +obj-$(CONFIG_ATH79_MACH_CAP4200AG)    += mach-cap4200ag.o
++obj-$(CONFIG_ATH79_MACH_CPE510)               += mach-cpe510.o
  obj-$(CONFIG_ATH79_MACH_DB120)                += mach-db120.o
 +obj-$(CONFIG_ATH79_MACH_DIR_505_A1)   += mach-dir-505-a1.o
 +obj-$(CONFIG_ATH79_MACH_DIR_600_A1)   += mach-dir-600-a1.o