brcm2708: add support for the new Raspberry Pi Zero W
authorStijn Tintel <stijn@linux-ipv6.be>
Sun, 5 Mar 2017 20:16:07 +0000 (21:16 +0100)
committerÁlvaro Fernández Rojas <noltari@gmail.com>
Thu, 9 Mar 2017 07:47:41 +0000 (08:47 +0100)
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
target/linux/brcm2708/base-files/etc/board.d/02_network
target/linux/brcm2708/base-files/etc/diag.sh
target/linux/brcm2708/base-files/lib/brcm2708.sh
target/linux/brcm2708/image/Makefile

index 21e86f4..9486a6a 100755 (executable)
@@ -18,6 +18,9 @@ rpi-b |\
 rpi-b-plus)
        ucidef_set_interface_lan "eth0"
        ;;
+rpi-zero-w)
+       ucidef_set_interface_lan "wlan0"
+       ;;
 esac
 
 board_config_flush
index 010a623..36c5cd7 100644 (file)
@@ -13,7 +13,8 @@ set_state() {
                ;;
        rpi-b |\
        rpi-cm |\
-       rpi-zero)
+       rpi-zero |\
+       rpi-zero-w)
                status_led="led0"
                ;;
        esac
index cebec64..81f123f 100644 (file)
@@ -28,6 +28,9 @@ brcm2708_detect() {
        "Raspberry Pi Zero Rev"*)
                board_name="rpi-zero"
                ;;
+       "Raspberry Pi Zero W Rev"*)
+               board_name="rpi-zero-w"
+               ;;
        *)
                board_name="unknown"
                ;;
index d0222df..d7385c4 100644 (file)
@@ -1,6 +1,6 @@
 # 
 # Copyright (C) 2012-2015 OpenWrt.org
-# Copyright (C) 2016 LEDE project
+# Copyright (C) 2016-2017 LEDE project
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -56,8 +56,9 @@ define Device/Default
 endef
 
 define Device/rpi
-  DEVICE_TITLE := Raspberry Pi B/B+/CM/Zero
-  DEVICE_DTS := bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm
+  DEVICE_TITLE := Raspberry Pi B/B+/CM/Zero/ZeroW
+  DEVICE_DTS := bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm bcm2708-rpi-0-w
+  DEVICE_PACKAGES := brcmfmac-firmware-43430-sdio kmod-brcmfmac wpad-mini
 endef
 ifeq ($(SUBTARGET),bcm2708)
   TARGET_DEVICES += rpi