case "$file_type" in
"chk") cmd=$(platform_trx_from_chk_cmd "$trx");;
"cybertan") cmd=$(platform_trx_from_cybertan_cmd "$trx");;
- "safeloader") trx=$(platform_img_from_safeloader "$trx");;
+ "safeloader") trx=$(platform_img_from_safeloader "$trx"); PART_NAME=os-image;;
"seama") trx=$(platform_img_from_seama "$trx");;
esac
--- /dev/null
+From a21e7548438f3a8f59f9b9f3a8bc973613d3726a Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 14 Jun 2018 18:41:47 +0200
+Subject: [PATCH] ARM: dts: BCM53573: Add architected timer
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's a standard ARM architected timer that was simply missed when
+initially adding this .dtsi file.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm53573.dtsi | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm53573.dtsi
++++ b/arch/arm/boot/dts/bcm53573.dtsi
+@@ -48,6 +48,14 @@
+ };
+ };
+
++ timer {
++ compatible = "arm,armv7-timer";
++ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
++ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
++ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
++ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
++ };
++
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
--- /dev/null
+From 2bebdfcdcd0feb58d5df419532a2cedc78a336d7 Mon Sep 17 00:00:00 2001
+From: Vivek Unune <npcomplete13@gmail.com>
+Date: Mon, 18 Jun 2018 13:41:59 -0400
+Subject: [PATCH] ARM: dts: BCM5301X: Add support for Linksys EA9500
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Hardware Info
+-------------
+
+Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
+Switch - BCM53012 in BCM4709C0KFEBG & external BCM53125
+DDR3 RAM - 256 MB
+Flash - 128 MB (Toshiba TC58BVG0S3HTA00)
+2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC
+Power Amp - Skyworks SE2623L 2.4 GHz power amp (x4)
+5GHz x 2 - BCM4366 4×4 2.4/5G single chip 802.11ac SoC
+Power Amp - PLX Technology PEX8603 3-lane, 3-port PCIe switch
+Ports - 8 Ports, 1 WAN Ports
+Antennas - 8 Antennas
+Serial Port - @J6 [GND,TX,RX] (VCC NC) 115200 8n1
+
+Tested with OpenWrt built with DSA driver and Kernel v4.14
+
+Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 229 ++++++++++++++++++++++++
+ 1 file changed, 229 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
++++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+@@ -31,6 +31,235 @@
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
++
++ rfkill {
++ label = "WiFi";
++ linux,code = <KEY_RFKILL>;
++ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
++ };
++
++ reset {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ wps {
++ label = "bcm53xx:white:wps";
++ gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
++ };
++
++ usb2 {
++ label = "bcm53xx:green:usb2";
++ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
++ trigger-sources = <&ohci_port2>, <&ehci_port2>;
++ linux,default-trigger = "usbport";
++ };
++
++ usb3 {
++ label = "bcm53xx:green:usb3";
++ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
++ trigger-sources = <&ohci_port1>, <&ehci_port1>,
++ <&xhci_port1>;
++ linux,default-trigger = "usbport";
++ };
++
++ power {
++ label = "bcm53xx:white:power";
++ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
++ };
++
++ wifi-disabled {
++ label = "bcm53xx:amber:wifi-disabled";
++ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
++ };
++
++ wifi-enabled {
++ label = "bcm53xx:white:wifi-enabled";
++ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
++ };
++
++ bluebar1 {
++ label = "bcm53xx:white:bluebar1";
++ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
++ };
++
++ bluebar2 {
++ label = "bcm53xx:white:bluebar2";
++ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
++ };
++
++ bluebar3 {
++ label = "bcm53xx:white:bluebar3";
++ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
++ };
++
++ bluebar4 {
++ label = "bcm53xx:white:bluebar4";
++ gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++ };
++
++ bluebar5 {
++ label = "bcm53xx:white:bluebar5";
++ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
++ };
++
++ bluebar6 {
++ label = "bcm53xx:white:bluebar6";
++ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
++ };
++
++ bluebar7 {
++ label = "bcm53xx:white:bluebar7";
++ gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
++ };
++
++ bluebar8 {
++ label = "bcm53xx:white:bluebar8";
++ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ mdio-bus-mux {
++ /* BIT(9) = 1 => external mdio */
++ mdio_ext: mdio@200 {
++ reg = <0x200>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++ };
++
++ mdio-mii-mux {
++ compatible = "mdio-mux-mmioreg";
++ mdio-parent-bus = <&mdio_ext>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x1800c1c0 0x4>;
++
++ /* BIT(6) = mdc, BIT(7) = mdio */
++ mux-mask = <0xc0>;
++
++ mdio-mii@0 {
++ /* Enable MII function */
++ reg = <0x0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ switch@0 {
++ compatible = "brcm,bcm53125";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++ reset-names = "robo_reset";
++ reg = <0>;
++ dsa,member = <1 0>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ label = "lan1";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan5";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan2";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan6";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "lan3";
++ };
++
++ sw1_p8: port@8 {
++ reg = <8>;
++ ethernet = <&sw0_p0>;
++ label = "cpu";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++ };
++ };
++ };
++ };
++};
++
++&usb2 {
++ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
++};
++
++&usb3 {
++ vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
++};
++
++&srab {
++ compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
++ status = "okay";
++ dsa,member = <0 0>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@1 {
++ reg = <1>;
++ label = "lan7";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan4";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan8";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "wan";
++ };
++
++ port@8 {
++ reg = <8>;
++ ethernet = <&gmac2>;
++ label = "cpu";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
++ sw0_p0: port@0 {
++ reg = <0>;
++ label = "extsw";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
+ };
+ };
+
--- /dev/null
+From ed4728d9fa0b19687caa964cf5c2082b80208167 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sat, 28 Jul 2018 13:25:48 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Specify flash partitions
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Most devices use Broadcom standard partitions which allows them to be
+described with the "brcm,bcm947xx-cfe-partitions". Exceptions are:
+1) TP-LINK devices which use "os-image" partition with TRX containing
+ kernel only + separated rootfs partition.
+2) Asus RT-AC87U with custom "asus" partition.
+
+This commit also removes undocumented and unsupported linux,part-probe
+binding which got accidentally upstreamed while describing SPI
+controller.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 28 +++++++++++++++++++
+ arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 31 ++++++++++++++++++++++
+ arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 28 +++++++++++++++++++
+ arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 4 +++
+ arch/arm/boot/dts/bcm5301x.dtsi | 5 +++-
+ 5 files changed, 95 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+@@ -94,6 +94,34 @@
+
+ &spi_nor {
+ status = "okay";
++
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ boot@0 {
++ label = "boot";
++ reg = <0x000000 0x040000>;
++ read-only;
++ };
++
++ os-image@100000 {
++ label = "os-image";
++ reg = <0x040000 0x200000>;
++ compatible = "brcm,trx";
++ };
++
++ rootfs@240000 {
++ label = "rootfs";
++ reg = <0x240000 0xc00000>;
++ };
++
++ nvram@ff0000 {
++ label = "nvram";
++ reg = <0xff0000 0x010000>;
++ };
++ };
+ };
+
+ &usb2 {
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -66,3 +66,34 @@
+ &usb3_phy {
+ status = "okay";
+ };
++
++&nandcs {
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ boot@0 {
++ label = "boot";
++ reg = <0x00000000 0x00080000>;
++ read-only;
++ };
++
++ nvram@80000 {
++ label = "nvram";
++ reg = <0x00080000 0x00180000>;
++ };
++
++ firmware@200000 {
++ label = "firmware";
++ reg = <0x00200000 0x07cc0000>;
++ compatible = "brcm,trx";
++ };
++
++ asus@7ec0000 {
++ label = "asus";
++ reg = <0x07ec0000 0x00140000>;
++ read-only;
++ };
++ };
++};
+--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+@@ -103,6 +103,34 @@
+
+ &spi_nor {
+ status = "okay";
++
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ boot@0 {
++ label = "boot";
++ reg = <0x000000 0x040000>;
++ read-only;
++ };
++
++ os-image@100000 {
++ label = "os-image";
++ reg = <0x040000 0x200000>;
++ compatible = "brcm,trx";
++ };
++
++ rootfs@240000 {
++ label = "rootfs";
++ reg = <0x240000 0xc00000>;
++ };
++
++ nvram@ff0000 {
++ label = "nvram";
++ reg = <0xff0000 0x010000>;
++ };
++ };
+ };
+
+ &usb3_phy {
+--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
++++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+@@ -12,6 +12,10 @@
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
++
++ partitions {
++ compatible = "brcm,bcm947xx-cfe-partitions";
++ };
+ };
+ };
+ };
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -475,8 +475,11 @@
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+- linux,part-probe = "ofpart", "bcm47xxpart";
+ status = "disabled";
++
++ partitions {
++ compatible = "brcm,bcm947xx-cfe-partitions";
++ };
+ };
+ };
+
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] Use "brcm,bcm947xx-cfe-partitions" binding for Broadcom
- partitions
-
----
-
---- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-@@ -12,6 +12,10 @@
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-+
-+ partitions {
-+ compatible = "brcm,bcm947xx-cfe-partitions";
-+ };
- };
- };
- };
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -456,8 +456,11 @@
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
-- linux,part-probe = "ofpart", "bcm47xxpart";
- status = "disabled";
-+
-+ partitions {
-+ compatible = "brcm,bcm947xx-cfe-partitions";
-+ };
- };
- };
-
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] mtd: bcm47xxpart: add device specific workarounds
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -15,6 +15,7 @@
- #include <linux/slab.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/of.h>
-
- #include <uapi/linux/magic.h>
-
-@@ -134,6 +135,36 @@ static int bcm47xxpart_parse(struct mtd_
- break;
- }
-
-+ /*
-+ * Device specific workarounds (hacks). We should use DT to
-+ * define partitions but we need a working TRX firmware splitter
-+ * first.
-+ */
-+ if (of_machine_is_compatible("asus,rt-ac87u") && offset == 0x7ec0000) {
-+ /*
-+ * "asus" partition uses JFFS2 which we don't detect and
-+ * we don't want to as this could affect other devices.
-+ */
-+ bcm47xxpart_add_part(&parts[curr_part++], "asus", offset, MTD_WRITEABLE);
-+ continue;
-+ } else if (of_machine_is_compatible("tplink,archer-c5-v2") && offset == 0xe40000) {
-+ /*
-+ * There is a whole set of partitions (not even listed
-+ * by original firmware): "default-mac", "pin",
-+ * "partition-table", etc.
-+ */
-+ bcm47xxpart_add_part(&parts[curr_part++], "tplink", offset, MTD_WRITEABLE);
-+ continue;
-+ } else if (of_machine_is_compatible("tplink,archer-c9-v1") && offset == 0xe40000) {
-+ /*
-+ * There is a whole set of partitions (not even listed
-+ * by original firmware): "default-mac", "pin",
-+ * "partition-table", etc.
-+ */
-+ bcm47xxpart_add_part(&parts[curr_part++], "tplink", offset, MTD_WRITEABLE);
-+ continue;
-+ }
-+
- /* Read beginning of the block */
- err = mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
- &bytes_read, (uint8_t *)buf);
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -48,6 +48,15 @@
- };
+@@ -54,6 +54,7 @@
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
++ clocks = <&ilp>;
};
-+ timer {
-+ compatible = "arm,armv7-timer";
-+ interrupts = <GIC_PPI 13 0>,
-+ <GIC_PPI 14 0>,
-+ <GIC_PPI 11 0>,
-+ <GIC_PPI 10 0>;
-+ clocks = <&ilp>;
-+ };
-+
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -348,14 +348,6 @@ static int bcma_register_devices(struct
projects / openwrt / openwrt.git / commitdiff