mediatek: cosmetic fixes for mt7629-lynx-rfb
authorChuanhong Guo <gch981213@gmail.com>
Fri, 1 Nov 2019 03:12:26 +0000 (11:12 +0800)
committerChuanhong Guo <gch981213@gmail.com>
Mon, 4 Nov 2019 12:51:19 +0000 (20:51 +0800)
This patch did the following things:
1. rename device compatible string
2. add earlycon into cmdline
3. add mac address location according to mt7629 eeprom layout
4. rename mtd partitions
5. replace spaces for indentation with tabs

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
target/linux/mediatek/files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts

index f3fadd301a1b0caa7e325bba9e2285a9648c8c30..b8ef3ed5577549f6e3f65e0d53873163477a9f3b 100644 (file)
@@ -10,7 +10,7 @@
 
 / {
        model = "MediaTek MT7629 reference board";
-       compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
+       compatible = "mediatek,mt7629-lynx-rfb", "mediatek,mt7629";
 
        aliases {
                serial0 = &uart0;
@@ -18,6 +18,7 @@
 
        chosen {
                stdout-path = "serial0:115200n8";
+               bootargs = "earlycon=uart8250,mmio32,0x11002000";
        };
 
        gpio-keys {
 };
 
 &eth {
-        pinctrl-names = "default";
-        pinctrl-0 = <&ephy_leds_pins>;
-        status = "okay";
-
-        gmac0: mac@0 {
-                compatible = "mediatek,eth-mac";
-                reg = <0>;
-                phy-mode = "sgmii";
-                fixed-link {
-                        speed = <1000>;
-                        full-duplex;
-                        pause;
-                };
-        };
-
-        gmac1: mac@1 {
-                compatible = "mediatek,eth-mac";
-                reg = <1>;
-                phy-handle = <&phy0>;
-        };
-
-        mdio: mdio-bus {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                phy0: ethernet-phy@0 {
-                        reg = <0>;
-                        phy-mode = "gmii";
-                };
-        };
+       pinctrl-names = "default";
+       pinctrl-0 = <&ephy_leds_pins>;
+       status = "okay";
+
+       gmac0: mac@0 {
+               compatible = "mediatek,eth-mac";
+               reg = <0>;
+               mtd-mac-address = <&factory 0x2a>;
+               phy-mode = "sgmii";
+               fixed-link {
+                       speed = <1000>;
+                       full-duplex;
+                       pause;
+               };
+       };
+
+       gmac1: mac@1 {
+               compatible = "mediatek,eth-mac";
+               reg = <1>;
+               mtd-mac-address = <&factory 0x24>;
+               phy-handle = <&phy0>;
+       };
+
+       mdio: mdio-bus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               phy0: ethernet-phy@0 {
+                       reg = <0>;
+                       phy-mode = "gmii";
+               };
+       };
 };
 
 &gsw {
                        };
 
                        factory: partition@70000 {
-                               label = "Factory";
+                               label = "factory";
                                reg = <0x70000 0x40000>;
                                read-only;
                        };
 
                        partition@b0000 {
-                               label = "Kernel";
+                               label = "firmware";
                                reg = <0xb0000 0xb50000>;
                        };
                };