base-files: diag.sh: Make it more generic towards DTS so it could be reused
authorPetr Štetiar <ynezz@true.cz>
Tue, 27 Nov 2018 17:22:47 +0000 (18:22 +0100)
committerJohn Crispin <john@phrozen.org>
Thu, 6 Dec 2018 07:42:40 +0000 (08:42 +0100)
I wanted to add status LEDs support to my imx6 based board and have
found out, that I could use diag.sh script found in ramips platform,
which seems to be also shared in a few other platforms:

 4801276bc2078c5bcf03003c831e3b0a target/linux/ramips/base-files/etc/diag.sh
 4801276bc2078c5bcf03003c831e3b0a target/linux/ipq40xx/base-files/etc/diag.sh
 4801276bc2078c5bcf03003c831e3b0a target/linux/ath79/base-files/etc/diag.sh

So I've extended the base diag.sh in a way, that if it detects any of
the DTS LED aliases, then it would use the generic DTS set_led_state
code.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
package/base-files/files/etc/diag.sh

index 8726a43..8eb36c6 100644 (file)
@@ -1,4 +1,50 @@
 #!/bin/sh
-# Copyright (C) 2006-2009 OpenWrt.org
+# Copyright (C) 2006-2019 OpenWrt.org
 
-set_state() { :; }
+. /lib/functions/leds.sh
+
+boot="$(get_dt_led boot)"
+failsafe="$(get_dt_led failsafe)"
+running="$(get_dt_led running)"
+upgrade="$(get_dt_led upgrade)"
+
+set_led_state() {
+       status_led="$boot"
+
+       case "$1" in
+       preinit)
+               status_led_blink_preinit
+               ;;
+       failsafe)
+               status_led_off
+               [ -n "$running" ] && {
+                       status_led="$running"
+                       status_led_off
+               }
+               status_led="$failsafe"
+               status_led_blink_failsafe
+               ;;
+       preinit_regular)
+               status_led_blink_preinit_regular
+               ;;
+       upgrade)
+               [ -n "$running" ] && {
+                       status_led="$running"
+                       status_led_off
+               }
+               status_led="$upgrade"
+               status_led_blink_preinit_regular
+               ;;
+       done)
+               status_led_off
+               [ -n "$running" ] && {
+                       status_led="$running"
+                       status_led_on
+               }
+               ;;
+       esac
+}
+
+set_state() {
+       [ -n "$boot" -o -n "$failsafe" -o -n "$running" -o -n "$upgrade" ] && set_led_state "$1"
+}