ramips: add support for PandoraBox PBR-M1
authorJohn Crispin <john@openwrt.org>
Thu, 18 Jun 2015 18:20:40 +0000 (18:20 +0000)
committerJohn Crispin <john@openwrt.org>
Thu, 18 Jun 2015 18:20:40 +0000 (18:20 +0000)
This patch is for PandoraBox PBR-M1 which is based on mt7621,
all the features work fine, including rtc, leds, button, usb3.0, etc.

Signed-off-by: tymon <banglang.huang@foxmail.com>
SVN-Revision: 46041

target/linux/ramips/base-files/etc/board.d/01_leds
target/linux/ramips/base-files/etc/board.d/02_network
target/linux/ramips/base-files/etc/diag.sh
target/linux/ramips/base-files/lib/ramips.sh
target/linux/ramips/base-files/lib/upgrade/platform.sh
target/linux/ramips/dts/PBR-M1.dts [new file with mode: 0644]
target/linux/ramips/image/Makefile
target/linux/ramips/mt7621/profiles/pbr-m1.mk [new file with mode: 0644]

index ad0062a..c63ff47 100755 (executable)
@@ -175,6 +175,11 @@ case $board in
                set_wifi_led "7links:orange:wifi"
                set_usb_led "7links:blue:storage"
                ;;
+    pbr-m1)
+        ucidef_set_led_netdev "internet" "internet" "pbr-m1:green:internet" "eth0.2"
+        ucidef_set_led_default "power" "power" "pbr-m1:green:power" "1"
+        ucidef_set_led_default "sys" "sys" "pbr-m1:green:sys" "1"
+        ;;
        sl-r7205)
                set_wifi_led "rt2800pci-phy0::radio"
                ;;
index 4982566..b3dd1f1 100755 (executable)
@@ -129,6 +129,7 @@ ramips_setup_interfaces()
        dir-320-b1 | \
        dir-615-h1 | \
        firewrt | \
+       pbr-m1 | \
        hlk-rm04 | \
        mt7621 | \
        mt7628 | \
index d6001c5..bfc92e5 100644 (file)
@@ -117,6 +117,9 @@ get_status_led() {
        omni-emb-hpm)
                status_led="emb:green:status"
                ;;
+       pbr-m1)
+               status_led="pbr-m1:green:sys"
+               ;;
        psr-680w)
                status_led="psr-680w:red:wan"
                ;;
index 0cb02c7..14ffc21 100755 (executable)
@@ -247,6 +247,9 @@ ramips_board_detect() {
        *"OLinuXino-RT5350F-EVB")
                name="olinuxino-rt5350f-evb"
                ;;
+       *"PBR-M1")
+               name="pbr-m1"
+               ;;
        *"Petatel PSR-680W"*)
                name="psr-680w"
                ;;
index 99cabbd..8d5f74f 100755 (executable)
@@ -53,6 +53,7 @@ platform_check_image() {
        fonera20n | \
        freestation5 | \
        firewrt |\
+       pbr-m1 |\
        hg255d | \
        hlk-rm04 | \
        ht-tm02 | \
diff --git a/target/linux/ramips/dts/PBR-M1.dts b/target/linux/ramips/dts/PBR-M1.dts
new file mode 100644 (file)
index 0000000..76eae93
--- /dev/null
@@ -0,0 +1,150 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+       compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+       model = "PBR-M1";
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x10000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       sdhci@10130000 {
+               status = "okay";
+       };
+
+       palmbus@1E000000 {
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "w25q256";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0xfb0000>;
+                               };
+
+                       };
+               };
+
+               i2c@900 {
+                       compatible = "ralink,i2c-mt7621";
+                       reg = <0x900 0x100>;
+
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c_pins>;
+
+                       status = "okay";
+
+                       pcf8563: rtc@51 {
+                               status = "okay";
+                               compatible = "nxp,pcf8563";
+                               reg = <0x51>;
+            };
+        };
+    };
+
+       pcie@1e140000 {
+               status = "okay";
+
+               pcie0 {
+                       mt76@0,0 {
+                               reg = <0x0000 0 0 0 0>;
+                               device_type = "pci";
+                               mediatek,mtd-eeprom = <&factory 0x0000>;
+                               mediatek,2ghz = <0>;
+                       };
+               };
+
+               pcie1 {
+                       mt76@1,0 {
+                               reg = <0x0000 0 0 0 0>;
+                               device_type = "pci";
+                               mediatek,mtd-eeprom = <&factory 0x8000>;
+                               mediatek,5ghz = <0>;
+                       };
+               };
+       };
+
+       ethernet@1e100000 {
+               mtd-mac-address = <&factory 0xe000>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               buzzer {
+                       label = "pbr-m1:buzzer";
+                       gpios = <&gpio0 27 1>;
+               };
+
+               power {
+                       label = "pbr-m1:green:power";
+                       gpios = <&gpio0 25 1>;
+               };
+
+               sys {
+                       label = "pbr-m1:green:sys";
+                       gpios = <&gpio0 24 1>;
+               };
+
+               internet {
+                       label = "pbr-m1:green:internet";
+                       gpios = <&gpio0 23 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 18 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+               gpio {
+                               ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+};
index 106cb2d..afbe567 100644 (file)
@@ -919,7 +919,7 @@ endif
 #
 
 ifeq ($(SUBTARGET),mt7621)
-  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt
+  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1
 endif
 
 define Device/mt7621
@@ -956,6 +956,11 @@ define Device/firewrt
   IMAGE_SIZE := $(ralink_default_fw_size_16M)
 endef
 
+define Device/pbr-m1
+  DTS := PBR-M1
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+
 #
 # MT7628 Profiles
 #
diff --git a/target/linux/ramips/mt7621/profiles/pbr-m1.mk b/target/linux/ramips/mt7621/profiles/pbr-m1.mk
new file mode 100644 (file)
index 0000000..5b4dfb5
--- /dev/null
@@ -0,0 +1,22 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/PBR-M1
+       NAME:=PBR-M1 Device
+       PACKAGES:=\
+               kmod-usb-core kmod-usb3 kmod-usb-hid kmod-sdhci-mt7620 \
+               kmod-ledtrig-usbdev kmod-mt76 kmod-ata-core kmod-ata-ahci \
+               kmod-usb3-mt7621 kmod-rtc-pcf8563
+endef
+
+
+FEATURES+=rtc
+
+define Profile/PBR-M1/Description
+       Default package set compatible with most boards.
+endef
+$(eval $(call Profile,PBR-M1))