mcs814x: remove linux 3.3 support
authorFelix Fietkau <nbd@openwrt.org>
Sat, 24 Jan 2015 20:01:33 +0000 (20:01 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Sat, 24 Jan 2015 20:01:33 +0000 (20:01 +0000)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44106

46 files changed:
target/linux/mcs814x/config-3.3 [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/boot/dts/dlan-usb-extender.dts [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/boot/dts/mcs8140.dtsi [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/boot/dts/rbt-832.dts [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/Kconfig [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/Makefile [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/Makefile.boot [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/board-mcs8140-dt.c [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/clock.c [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/common.c [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/common.h [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/cpu.h [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/debug-macro.S [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/entry-macro.S [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/gpio.h [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/hardware.h [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/io.h [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/irqs.h [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/mcs814x.h [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/memory.h [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/param.h [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/system.h [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/timex.h [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/uncompress.h [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/irq.c [deleted file]
target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/timer.c [deleted file]
target/linux/mcs814x/files-3.3/drivers/char/hw_random/mcs814x-rng.c [deleted file]
target/linux/mcs814x/files-3.3/drivers/gpio/gpio-mcs814x.c [deleted file]
target/linux/mcs814x/files-3.3/drivers/net/ethernet/mcs8140/Kconfig [deleted file]
target/linux/mcs814x/files-3.3/drivers/net/ethernet/mcs8140/Makefile [deleted file]
target/linux/mcs814x/files-3.3/drivers/net/ethernet/mcs8140/nuport_mac.c [deleted file]
target/linux/mcs814x/files-3.3/drivers/net/phy/mcs814x.c [deleted file]
target/linux/mcs814x/files-3.3/drivers/usb/host/ehci-mcs814x.c [deleted file]
target/linux/mcs814x/files-3.3/drivers/usb/host/ohci-mcs814x.c [deleted file]
target/linux/mcs814x/files-3.3/drivers/watchdog/mcs814x_wdt.c [deleted file]
target/linux/mcs814x/image/Makefile
target/linux/mcs814x/patches-3.3/001-platform.patch [deleted file]
target/linux/mcs814x/patches-3.3/003-ethernet.patch [deleted file]
target/linux/mcs814x/patches-3.3/004-usb.patch [deleted file]
target/linux/mcs814x/patches-3.3/005-mcs814x_rng.patch [deleted file]
target/linux/mcs814x/patches-3.3/006-mcs814x_wdt.patch [deleted file]
target/linux/mcs814x/patches-3.3/008-mcs814x_gpio.patch [deleted file]
target/linux/mcs814x/patches-3.3/010-fdt_config_cmdline_extend.patch [deleted file]
target/linux/mcs814x/patches-3.3/011-mcs814x_internal_phy.patch [deleted file]
target/linux/mcs814x/patches-3.3/012-mtd-cfi_cmdset_0002-force-word-write.patch [deleted file]
target/linux/mcs814x/patches-3.3/013-ohci_workarounds.patch [deleted file]

diff --git a/target/linux/mcs814x/config-3.3 b/target/linux/mcs814x/config-3.3
deleted file mode 100644 (file)
index 85ff2be..0000000
+++ /dev/null
@@ -1,186 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_ARCH_MCS814X=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_NR_BANKS=8
-# CONFIG_ARM_THUMB is not set
-# CONFIG_ARPD is not set
-CONFIG_BCMA_POSSIBLE=y
-CONFIG_BINFMT_MISC=y
-# CONFIG_BRIDGE is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CMDLINE="earlyprintk"
-CONFIG_CMDLINE_EXTEND=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_ARM926T=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_NONE=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_FIQ=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_MCS814X=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MCS814X=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_DOMAIN=y
-# CONFIG_ISDN is not set
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_KALLSYMS=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LIBCRC32C=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_DLAN_USB_EXT=y
-CONFIG_MACH_RBT_832=y
-CONFIG_MCS8140=y
-CONFIG_MCS814X_PHY=y
-# CONFIG_MCS814X_WATCHDOG is not set
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_IMPA7 is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_MACH_MEMORY_H=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_KEY=y
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NUPORT_ETHERNET_DRIVER=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PARTITION_ADVANCED is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_SWAP is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_UID16=y
-# CONFIG_USB_ARCH_HAS_XHCI is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFP is not set
-# CONFIG_VLAN_8021Q is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_WEXT_PRIV is not set
-# CONFIG_WEXT_SPY is not set
-# CONFIG_WIRELESS_EXT is not set
-CONFIG_XZ_DEC=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/boot/dts/dlan-usb-extender.dts b/target/linux/mcs814x/files-3.3/arch/arm/boot/dts/dlan-usb-extender.dts
deleted file mode 100644 (file)
index 0c85b94..0000000
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * dlan-usb-extender.dts - Device Tree file for Devolo dLAN USB Extender
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under GPLv2
- */
-
-/dts-v1/;
-/include/ "mcs8140.dtsi"
-
-/ {
-       model = "Devolo dLAN USB Extender";
-       compatible = "devolo,dlan-usb-extender", "moschip,mcs8140", "moschip,mcs814x";
-
-       chosen {
-               bootargs = "mem=16M console=ttyS0,57600 earlyprintk";
-       };
-
-       ahb {
-               vci {
-                       eth0: ethernet@40084000 {
-                               phy = <&phy0>;
-                               phy-mode = "mii";
-
-                               phy0: ethernet-phy@0 {
-                                       reg = <8>;
-                               };
-                       };
-
-                       adc {
-                               sdram: memory@0,0 {
-                                       reg = <0 0 0x1000000>;
-                               };
-
-                               nor: flash@7,0 {
-
-                                       partition@0 {
-                                               label = "ArmBoot";
-                                               reg = <0 0x30000>;
-                                       };
-                                       partition@30000 {
-                                               label = "Config1";
-                                               reg = <0x30000 0x10000>;
-                                       };
-                                       partition@40000 {
-                                               label = "Config2";
-                                               reg = <0x40000 0x10000>;
-                                       };
-                                       partition@50000 {
-                                               label = "kernel";
-                                               reg = <0x50000 0x100000>;
-                                       };
-                                       partition@150000 {
-                                               label = "rootfs";
-                                               reg = <0x150000 0x3C0000>;
-                                       };
-                                       partition@50001 {
-                                               label = "linux";
-                                               reg = <0x50000 0x4C0000>;
-                                       };
-                               };
-                       };
-
-                       leds {
-                               compatible = "gpio-leds";
-
-                               usb {
-                                       label = "dlan-usb-extender:green:usb";
-                                       gpios = <&gpio 19 0>;   // gpio 19 active high
-                               };
-                       };
-               };
-       };
-};
-
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/boot/dts/mcs8140.dtsi b/target/linux/mcs814x/files-3.3/arch/arm/boot/dts/mcs8140.dtsi
deleted file mode 100644 (file)
index b7e8eb4..0000000
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * mcs8140.dtsi - Device Tree Include file for Moschip MCS8140 family SoC
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under GPLv2.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-       model = "Moschip MCS8140 family SoC";
-       compatible = "moschip,mcs8140";
-       interrupt-parent = <&intc>;
-
-       aliases {
-               serial0 = &uart0;
-               eth0 = &eth0;
-       };
-
-       cpus {
-               cpu@0 {
-                       compatible = "arm,arm926ejs";
-               };
-       };
-
-       ahb {
-               compatible = "simple-bus";
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-
-               vci {
-                       compatible = "simple-bus";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       ranges;
-
-                       eth0: ethernet@40084000 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-
-                               compatible = "moschip,nuport-mac";
-                               reg = <0x40084000 0xd8          // mac
-                                       0x40080000 0x58>;       // dma channels
-                               interrupts = <4 5 29>;  /* tx, rx, link */
-                               nuport-mac,buffer-shifting;
-                               nuport-mac,link-activity = <0>;
-                       };
-
-                       tso@40088000 {
-                               reg = <0x40088000 0x1c>;
-                               interrupts = <7>;
-                       };
-
-                       i2s@4008c000 {
-                               compatible = "moschip,mcs814x-i2s";
-                               reg = <0x4008c000 0x18>;
-                               interrupts = <8>;
-                       };
-
-                       ipsec@40094000 {
-                               compatible = "moschip,mcs814x-ipsec";
-                               reg = <0x40094000 0x1d8>;
-                               interrupts = <16>;
-                       };
-
-                       rng@4009c000 {
-                               compatible = "moschip,mcs814x-rng";
-                               reg = <0x4009c000 0x8>;
-                       };
-
-                       memc@400a8000 {
-                               reg = <0x400a8000 0x58>;
-                       };
-
-                       list-proc@400ac0c0 {
-                               reg = <0x400ac0c0 0x38>;
-                               interrupts = <19 27>;           // done, error
-                       };
-
-                       gpio: gpio@400d0000 {
-                               compatible = "moschip,mcs814x-gpio";
-                               reg = <0x400d0000 0x670>;
-                               interrupts = <10>;
-                               #gpio-cells = <2>;
-                               gpio-controller;
-                               num-gpios = <20>;
-                       };
-
-                       eepio: gpio@400d4000 {
-                               compatible = "moschip,mcs814x-gpio";
-                               reg = <0x400d4000 0x470>;
-                               #gpio-cells = <2>;
-                               gpio-controller;
-                               num-gpios = <4>;
-                       };
-
-                       uart0: serial@400dc000 {
-                               compatible = "ns16550";
-                               reg = <0x400dc000 0x20>;
-                               clock-frequency = <50000000>;
-                               reg-shift = <2>;
-                               interrupts = <21>;
-                               status = "okay";
-                       };
-
-                       intc: interrupt-controller@400e4000 {
-                               #interrupt-cells = <1>;
-                               compatible = "moschip,mcs814x-intc";
-                               interrupt-controller;
-                               interrupt-parent;
-                               reg = <0x400e4000 0x48>;
-                       };
-
-                       m2m@400e8000 {
-                               reg = <0x400e8000 0x24>;
-                               interrupts = <17>;
-                       };
-
-                       eth-filters@400ec000 {
-                               reg = <0x400ec000 0x80>;
-                       };
-
-                       timer: timer@400f800c {
-                               compatible = "moschip,mcs814x-timer";
-                               interrupts = <0>;
-                               reg = <0x400f800c 0x8>;
-                       };
-
-                       watchdog@400f8014 {
-                               compatible = "moschip,mcs814x-wdt";
-                               reg = <0x400f8014 0x8>;
-                       };
-
-                       adc {
-                               compatible = "simple-bus";
-                               #address-cells = <2>;
-                               #size-cells = <1>;
-                               // 8 64MB chip-selects
-                               ranges = <0 0 0x00000000 0x4000000      // sdram
-                                         1 0 0x04000000 0x4000000      // sdram
-                                         2 0 0x08000000 0x4000000      // reserved
-                                         3 0 0x0c000000 0x4000000      // flash/localbus
-                                         4 0 0x10000000 0x4000000      // flash/localbus
-                                         5 0 0x14000000 0x4000000      // flash/localbus
-                                         6 0 0x18000000 0x4000000      // flash/localbus
-                                         7 0 0x1c000000 0x4000000>;    // flash/localbus
-
-                               sdram: memory@0,0 {
-                                       reg = <0 0 0>;
-                               };
-
-                               nor: flash@7,0 {
-                                       reg = <7 0 0x4000000>;
-                                       compatible = "cfi-flash";
-                                       bank-width = <1>;               // 8-bit external flash
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-                                };
-                        };
-
-                       usb0: ehci@400fc000 {
-                               compatible = "moschip,mcs814x-ehci", "usb-ehci";
-                               reg = <0x400fc000 0x74>;
-                               interrupts = <2>;
-                       };
-
-                       usb1: ohci@400fd000 {
-                               compatible = "moschip,mcs814x-ohci", "ohci-le";
-                               reg = <0x400fd000 0x74>;
-                               interrupts = <11>;
-                       };
-
-                       usb2: ohci@400fe000 {
-                               compatible = "moschip,mcs814x-ohci", "ohci-le";
-                               reg = <0x400fe000 0x74>;
-                               interrupts = <12>;
-                       };
-
-                       usb3: otg@400ff000 {
-                               compatible = "moschip,msc814x-otg", "usb-otg";
-                               reg = <0x400ff000 0x1000>;
-                               interrupts = <13>;
-                       };
-               };
-
-       };
-};
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/boot/dts/rbt-832.dts b/target/linux/mcs814x/files-3.3/arch/arm/boot/dts/rbt-832.dts
deleted file mode 100644 (file)
index 9949c8e..0000000
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * rbt-832.dts - Device Tree file for Tigal RBT-832
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under GPLv2
- */
-
-/dts-v1/;
-/include/ "mcs8140.dtsi"
-
-/ {
-       model = "Tigal RBT-832";
-       compatible = "tigal,rbt-832", "moschip,mcs8140", "moschip,mcs814x";
-
-       chosen {
-               bootargs = "mem=32M console=ttyS0,115200 earlyprintk";
-       };
-
-       ahb {
-               vci {
-                       eth0: ethernet@40084000 {
-                               nuport-mac,link-activity = <0x01>;
-                               phy = <&phy0>;
-                               phy-mode = "mii";
-
-                               phy0: ethernet-phy@0 {
-                                       reg = <1>;
-                               };
-                       };
-
-                       adc {
-                               sdram: memory@0,0 {
-                                       reg = <0 0 0x2000000>;
-                               };
-
-                               nor: flash@7,0 {
-
-                                       partition@0 {
-                                               label = "ArmBoot";
-                                               reg = <0 0x40000>;
-                                       };
-                                       partition@30000 {
-                                               label = "Enviroment";
-                                               reg = <0x40000 0x20000>;
-                                       };
-                                       partition@50000 {
-                                               label = "bZimage";
-                                               reg = <0x60000 0x1a0000>;
-                                       };
-                                       partition@150000 {
-                                               label = "UserFS";
-                                               reg = <0x200000 0x600000>;
-                                       };
-                               };
-                       };
-
-                       leds {
-                               compatible = "gpio-leds";
-
-                               ethernet {
-                                       label = "rbt-832:red:ethernet";
-                                       gpios = <&gpio 0 0>;    // gpio 0 active high
-                               };
-
-                               usb0 {
-                                       label = "rbt-832:red:usb0";
-                                       gpios = <&gpio 4 0>;    // gpio 4 active high
-                               };
-
-                               usb1 {
-                                       label = "rbt-832:red:usb1";
-                                       gpios = <&gpio 3 0>;    // gpio 3 active high
-                               };
-
-                               usb2 {
-                                       label = "rbt-832:red:usb2";
-                                       gpios = <&gpio 2 0>;    // gpio 2 active high
-                               };
-
-                               usb3 {
-                                       label = "rbt-832:red:usb3";
-                                       gpios = <&gpio 1 0>;    // gpio 1 active high
-                               };
-                       };
-               };
-       };
-};
-
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/Kconfig b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/Kconfig
deleted file mode 100644 (file)
index 372c9b8..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
-if ARCH_MCS814X
-
-config MCS8140
-       bool
-       select CPU_ARM926T
-
-menu "Moschip MCS8140 boards"
-
-config MACH_DLAN_USB_EXT
-       bool "Devolo dLAN USB Extender"
-       select MCS8140
-       select NEW_LEDS
-       select LEDS_CLASS
-       select LEDS_GPIO
-       help
-         Machine support for the Devolo dLAN USB Extender
-
-config MACH_RBT_832
-       bool "Tigal RBT-832"
-       select MCS8140
-       select NEW_LEDS
-       select LEDS_CLASS
-       select LEDS_GPIO
-       help
-         Machine support for the Tigal RBT-832 board
-
-endmenu
-
-endif
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/Makefile b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/Makefile
deleted file mode 100644 (file)
index 68c5f4a..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y += clock.o
-obj-y += common.o
-obj-y += irq.o
-obj-y += timer.o
-obj-y += board-mcs8140-dt.o
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/Makefile.boot b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/Makefile.boot
deleted file mode 100644 (file)
index b572507..0000000
+++ /dev/null
@@ -1,4 +0,0 @@
-    zreladdr-y := 0x00008000
-
-dtb-$(CONFIG_MACH_DLAN_USB_EXT) += dlan-usb-extender.dtb
-dtb-$(CONFIG_MACH_RBT_832) += rbt-832.dtb
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/board-mcs8140-dt.c b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/board-mcs8140-dt.c
deleted file mode 100644 (file)
index 9f6625c..0000000
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Setup code for Moschip MCS8140-based board using Device Tree
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under GPLv2.
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/irqdomain.h>
-#include <linux/of_platform.h>
-
-#include "common.h"
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-static void __init mcs814x_dt_device_init(void)
-{
-       of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-       mcs814x_init_machine();
-}
-
-static const char *mcs8140_dt_board_compat[] __initdata = {
-       "moschip,mcs8140",
-       NULL,   /* sentinel */
-};
-
-DT_MACHINE_START(mcs8140_dt, "Moschip MCS8140 board")
-       /* Maintainer: Florian Fainelli <florian@openwrt.org> */
-       .timer          = &mcs814x_timer,
-       .map_io         = mcs814x_map_io,
-       .init_early     = mcs814x_clk_init,
-       .init_irq       = mcs814x_of_irq_init,
-       .init_machine   = mcs814x_dt_device_init,
-       .restart        = mcs814x_restart,
-       .dt_compat      = mcs8140_dt_board_compat,
-       .handle_irq     = mcs814x_handle_irq,
-MACHINE_END
-
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/clock.c b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/clock.c
deleted file mode 100644 (file)
index 413bfec..0000000
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Moschip MCS814x clock routines
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under GPLv2
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/clk.h>
-
-#include <mach/mcs814x.h>
-
-#include "common.h"
-
-#define KHZ    1000
-#define MHZ    (KHZ * KHZ)
-
-struct clk_ops {
-       unsigned long (*get_rate)(struct clk *clk);
-       int (*set_rate)(struct clk *clk, unsigned long rate);
-       struct clk *(*get_parent)(struct clk *clk);
-       int (*enable)(struct clk *clk, int enable);
-};
-
-struct clk {
-       struct clk *parent;             /* parent clk */
-       unsigned long rate;             /* clock rate in Hz */
-       unsigned long divider;          /* clock divider */
-       u32 usecount;                   /* reference count */
-       struct clk_ops *ops;            /* clock operation */
-       u32 enable_reg;                 /* clock enable register */
-       u32 enable_mask;                /* clock enable mask */
-};
-
-static unsigned long clk_divide_parent(struct clk *clk)
-{
-       if (clk->parent && clk->divider)
-               return clk_get_rate(clk->parent) / clk->divider;
-       else
-               return 0;
-}
-
-static int clk_local_onoff_enable(struct clk *clk, int enable)
-{
-       u32 tmp;
-
-       /* no enable_reg means the clock is always enabled */
-       if (!clk->enable_reg)
-               return 0;
-
-       tmp = readl_relaxed(mcs814x_sysdbg_base + clk->enable_reg);
-       if (!enable)
-               tmp &= ~clk->enable_mask;
-       else
-               tmp |= clk->enable_mask;
-
-       writel_relaxed(tmp, mcs814x_sysdbg_base + clk->enable_reg);
-
-       return 0;
-}
-
-static struct clk_ops default_clk_ops = {
-       .get_rate       = clk_divide_parent,
-       .enable         = clk_local_onoff_enable,
-};
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static const unsigned long cpu_freq_table[] = {
-       175000,
-       300000,
-       125000,
-       137500,
-       212500,
-       250000,
-       162500,
-       187500,
-       162500,
-       150000,
-       225000,
-       237500,
-       200000,
-       262500,
-       275000,
-       287500
-};
-
-static struct clk clk_cpu;
-
-/* System clock is fixed at 50Mhz */
-static struct clk clk_sys = {
-       .rate   = 50 * MHZ,
-};
-
-static struct clk clk_sdram;
-
-static struct clk clk_timer0 = {
-       .parent = &clk_sdram,
-       .divider = 2,
-       .ops    = &default_clk_ops,
-};
-
-static struct clk clk_timer1_2 = {
-       .parent = &clk_sys,
-};
-
-/* Watchdog clock is system clock / 128 */
-static struct clk clk_wdt = {
-       .parent = &clk_sys,
-       .divider = 128,
-       .ops    = &default_clk_ops,
-};
-
-static struct clk clk_emac = {
-       .ops            = &default_clk_ops,
-       .enable_reg     = SYSDBG_SYSCTL,
-       .enable_mask    = SYSCTL_EMAC,
-};
-
-static struct clk clk_ephy = {
-       .ops            = &default_clk_ops,
-       .enable_reg     = SYSDBG_PLL_CTL,
-       .enable_mask    = ~SYSCTL_EPHY, /* active low */
-};
-
-static struct clk clk_cipher = {
-       .ops            = &default_clk_ops,
-       .enable_reg     = SYSDBG_SYSCTL,
-       .enable_mask    = SYSCTL_CIPHER,
-};
-
-#define CLK(_dev, _con, _clk)  \
-{ .dev_id = (_dev), .con_id = (_con), .clk = (_clk) },
-
-static struct clk_lookup mcs814x_chip_clks[] = {
-       CLK("cpu", NULL, &clk_cpu)
-       CLK("sys", NULL, &clk_sys)
-       CLK("sdram", NULL, &clk_sdram)
-       /* 32-bits timer0 */
-       CLK("timer0", NULL, &clk_timer0)
-       /* 16-bits timer1 */
-       CLK("timer1", NULL, &clk_timer1_2)
-       /* 64-bits timer2, same as timer 1 */
-       CLK("timer2", NULL, &clk_timer1_2)
-       CLK(NULL, "wdt", &clk_wdt)
-       CLK(NULL, "emac", &clk_emac)
-       CLK(NULL, "ephy", &clk_ephy)
-       CLK(NULL, "cipher", &clk_cipher)
-};
-
-static void local_clk_disable(struct clk *clk)
-{
-       WARN_ON(!clk->usecount);
-
-       if (clk->usecount > 0) {
-               clk->usecount--;
-
-               if ((clk->usecount == 0) && (clk->ops->enable))
-                       clk->ops->enable(clk, 0);
-
-               if (clk->parent)
-                       local_clk_disable(clk->parent);
-       }
-}
-
-static int local_clk_enable(struct clk *clk)
-{
-       int ret = 0;
-
-       if (clk->parent)
-               ret = local_clk_enable(clk->parent);
-
-       if (ret)
-               return ret;
-
-       if ((clk->usecount == 0) && (clk->ops->enable))
-               ret = clk->ops->enable(clk, 1);
-
-       if (!ret)
-               clk->usecount++;
-       else if (clk->parent && clk->parent->ops->enable)
-               local_clk_disable(clk->parent);
-
-       return ret;
-}
-
-int clk_enable(struct clk *clk)
-{
-       int ret;
-       unsigned long flags;
-
-       spin_lock_irqsave(&clocks_lock, flags);
-       ret = local_clk_enable(clk);
-       spin_unlock_irqrestore(&clocks_lock, flags);
-
-       return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-       unsigned long flags;
-
-       spin_lock_irqsave(&clocks_lock, flags);
-       local_clk_disable(clk);
-       spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-       if (unlikely(IS_ERR_OR_NULL(clk)))
-               return 0;
-
-       if (clk->rate)
-               return clk->rate;
-
-       if (clk->ops && clk->ops->get_rate)
-               return clk->ops->get_rate(clk);
-
-       return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-       unsigned long flags;
-
-       if (unlikely(IS_ERR_OR_NULL(clk)))
-               return NULL;
-
-       if (!clk->ops || !clk->ops->get_parent)
-               return clk->parent;
-
-       spin_lock_irqsave(&clocks_lock, flags);
-       clk->parent = clk->ops->get_parent(clk);
-       spin_unlock_irqrestore(&clocks_lock, flags);
-
-       return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-void __init mcs814x_clk_init(void)
-{
-       u32 bs1;
-       u8 cpu_freq;
-
-       clkdev_add_table(mcs814x_chip_clks, ARRAY_SIZE(mcs814x_chip_clks));
-
-       /* read the bootstrap registers to know the exact clocking scheme */
-       bs1 = readl_relaxed(mcs814x_sysdbg_base + SYSDBG_BS1);
-       cpu_freq = (bs1 >> CPU_FREQ_SHIFT) & CPU_FREQ_MASK;
-
-       pr_info("CPU frequency: %lu (kHz)\n", cpu_freq_table[cpu_freq]);
-       clk_cpu.rate = cpu_freq * KHZ;
-
-       /* read SDRAM frequency */
-       if (bs1 & SDRAM_FREQ_BIT)
-               clk_sdram.rate = 100 * MHZ;
-       else
-               clk_sdram.rate = 133 * MHZ;
-
-       pr_info("SDRAM frequency: %lu (MHz)\n", clk_sdram.rate / MHZ);
-}
-
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/common.c b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/common.c
deleted file mode 100644 (file)
index 68b0a0d..0000000
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * arch/arm/mach-mcs814x/common.c
- *
- * Core functions for Moschip MCS814x SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/mcs814x.h>
-#include <mach/cpu.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-void __iomem *mcs814x_sysdbg_base;
-
-static struct map_desc mcs814x_io_desc[] __initdata = {
-       {
-               .virtual        = MCS814X_IO_BASE,
-               .pfn            = __phys_to_pfn(MCS814X_IO_START),
-               .length         = MCS814X_IO_SIZE,
-               .type           = MT_DEVICE
-       },
-};
-
-struct cpu_mode {
-       const char *name;
-       int gpio_start;
-       int gpio_end;
-};
-
-static const struct cpu_mode cpu_modes[] = {
-       {
-               .name           = "I2S",
-               .gpio_start     = 4,
-               .gpio_end       = 8,
-       },
-       {
-               .name           = "UART",
-               .gpio_start     = 4,
-               .gpio_end       = 9,
-       },
-       {
-               .name           = "External MII",
-               .gpio_start     = 0,
-               .gpio_end       = 16,
-       },
-       {
-               .name           = "Normal",
-               .gpio_start     = -1,
-               .gpio_end       = -1,
-       },
-};
-
-static void mcs814x_eth_hardware_filter_set(u8 value)
-{
-       u32 reg;
-
-       reg = readl_relaxed(MCS814X_VIRT_BASE + MCS814X_DBGLED);
-       if (value)
-               reg |= 0x80;
-       else
-               reg &= ~0x80;
-       writel_relaxed(reg, MCS814X_VIRT_BASE + MCS814X_DBGLED);
-}
-
-static void mcs814x_eth_led_cfg_set(u8 cfg)
-{
-       u32 reg;
-
-       reg = readl_relaxed(mcs814x_sysdbg_base + SYSDBG_BS2);
-       reg &= ~LED_CFG_MASK;
-       reg |= cfg;
-       writel_relaxed(reg, mcs814x_sysdbg_base + SYSDBG_BS2);
-}
-
-static void mcs814x_eth_buffer_shifting_set(u8 value)
-{
-       u8 reg;
-
-       reg = readb_relaxed(mcs814x_sysdbg_base + SYSDBG_SYSCTL_MAC);
-       if (value)
-               reg |= BUF_SHIFT_BIT;
-       else
-               reg &= ~BUF_SHIFT_BIT;
-       writeb_relaxed(reg, mcs814x_sysdbg_base + SYSDBG_SYSCTL_MAC);
-}
-
-static struct of_device_id mcs814x_eth_ids[] __initdata = {
-       { .compatible = "moschip,nuport-mac", },
-       { /* sentinel */ },
-};
-
-/* Configure platform specific knobs based on ethernet device node
- * properties */
-static void mcs814x_eth_init(void)
-{
-       struct device_node *np;
-       const unsigned int *intspec;
-
-       np = of_find_matching_node(NULL, mcs814x_eth_ids);
-       if (!np)
-               return;
-
-       /* hardware filter must always be enabled */
-       mcs814x_eth_hardware_filter_set(1);
-
-       intspec = of_get_property(np, "nuport-mac,buffer-shifting", NULL);
-       if (!intspec)
-               mcs814x_eth_buffer_shifting_set(0);
-       else
-               mcs814x_eth_buffer_shifting_set(1);
-
-       intspec = of_get_property(np, "nuport-mac,link-activity", NULL);
-       if (intspec)
-               mcs814x_eth_led_cfg_set(be32_to_cpup(intspec));
-
-       of_node_put(np);
-}
-
-void __init mcs814x_init_machine(void)
-{
-       u32 bs2, cpu_mode;
-       int gpio;
-
-       bs2 = readl_relaxed(mcs814x_sysdbg_base + SYSDBG_BS2);
-       cpu_mode = (bs2 >> CPU_MODE_SHIFT) & CPU_MODE_MASK;
-
-       pr_info("CPU mode: %s\n", cpu_modes[cpu_mode].name);
-
-       /* request the gpios since the pins are muxed for functionnality */
-       for (gpio = cpu_modes[cpu_mode].gpio_start;
-               gpio == cpu_modes[cpu_mode].gpio_end; gpio++) {
-               if (gpio != -1)
-                       gpio_request(gpio, cpu_modes[cpu_mode].name);
-       }
-
-       mcs814x_eth_init();
-}
-
-void __init mcs814x_map_io(void)
-{
-       iotable_init(mcs814x_io_desc, ARRAY_SIZE(mcs814x_io_desc));
-
-       mcs814x_sysdbg_base = ioremap(MCS814X_IO_START + MCS814X_SYSDBG,
-                                       MCS814X_SYSDBG_SIZE);
-       if (!mcs814x_sysdbg_base)
-               panic("unable to remap sysdbg base");
-}
-
-void mcs814x_restart(char mode, const char *cmd)
-{
-       writel_relaxed(~(1 << 31), mcs814x_sysdbg_base);
-}
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/common.h b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/common.h
deleted file mode 100644 (file)
index e523abe..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __ARCH_MCS814X_COMMON_H
-#define __ARCH_MCS814X_COMMON_H
-
-#include <asm/mach/time.h>
-
-void mcs814x_map_io(void);
-void mcs814x_clk_init(void);
-void mcs814x_of_irq_init(void);
-void mcs814x_init_machine(void);
-void mcs814x_handle_irq(struct pt_regs *regs);
-void mcs814x_restart(char mode, const char *cmd);
-extern struct sys_timer mcs814x_timer;
-extern void __iomem *mcs814x_sysdbg_base;
-
-#endif /* __ARCH_MCS814X_COMMON_H */
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/cpu.h b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/cpu.h
deleted file mode 100644 (file)
index 1ef3c4a..0000000
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_ARCH_CPU_H__
-#define __ASM_ARCH_CPU_H__
-
-#include <asm/cputype.h>
-
-#define MCS8140_ID     0x41069260      /* ARM926EJ-S */
-#define MCS814X_MASK   0xff0ffff0
-
-#ifdef CONFIG_MCS8140
-/* Moschip MCS8140 is based on an ARM926EJ-S core */
-#define soc_is_mcs8140()       ((read_cpuid_id() & MCS814X_MASK) == MCS8140_ID)
-#else
-#define soc_is_mcs8140()       (0)
-#endif /* !CONFIG_MCS8140 */
-
-#endif /* __ASM_ARCH_CPU_H__ */
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/debug-macro.S b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/debug-macro.S
deleted file mode 100644 (file)
index 93ecea4..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <mach/mcs814x.h>
-
-                .macro  addruart, rp, rv, tmp
-               ldr     \rp, =MCS814X_PHYS_BASE
-               ldr     \rv, =MCS814X_VIRT_BASE
-               orr     \rp, \rp, #MCS814X_UART
-               orr     \rv, \rv, #MCS814X_UART
-                .endm
-
-#define UART_SHIFT     2
-#include <asm/hardware/debug-8250.S>
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/entry-macro.S b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/entry-macro.S
deleted file mode 100644 (file)
index 16d2d6d..0000000
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <mach/mcs814x.h>
-                .macro  disable_fiq
-                .endm
-
-               .macro arch_ret_to_user, tmp1, tmp2
-               .endm
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/gpio.h b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/gpio.h
deleted file mode 100644 (file)
index 20240c2..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-/* new generic GPIO API */
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep  __gpio_cansleep
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-       return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-       return -EINVAL;
-}
-
-#endif
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/hardware.h b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/hardware.h
deleted file mode 100644 (file)
index 529f648..0000000
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "mcs814x.h"
-
-#endif
-
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/io.h b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/io.h
deleted file mode 100644 (file)
index 80e56f6..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT         0xffffffff
-
-/*
- * We don't support ins[lb]/outs[lb].  Make them fault.
- */
-#define __raw_readsb(p, d, l)  do { *(int *)0 = 0; } while (0)
-#define __raw_readsl(p, d, l)  do { *(int *)0 = 0; } while (0)
-#define __raw_writesb(p, d, l) do { *(int *)0 = 0; } while (0)
-#define __raw_writesl(p, d, l) do { *(int *)0 = 0; } while (0)
-
-#define __io(a)                __typesafe_io(a)
-#define __mem_pci(a)   (a)
-
-#endif
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/irqs.h b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/irqs.h
deleted file mode 100644 (file)
index 7b9e07c..0000000
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define FIQ_START      0
-
-#define NR_IRQS                32
-
-#endif
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/mcs814x.h b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/mcs814x.h
deleted file mode 100644 (file)
index 8252d33..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_MCS814X_H
-#define __ASM_ARCH_MCS814X_H
-
-#define MCS814X_IO_BASE                0xF0000000
-#define MCS814X_IO_START       0x40000000
-#define MCS814X_IO_SIZE                0x00100000
-
-/* IRQ controller register offset */
-#define MCS814X_IRQ_ICR                0x00
-#define MCS814X_IRQ_ISR                0x04
-#define MCS814X_IRQ_MASK       0x20
-#define MCS814X_IRQ_STS0       0x40
-
-#define MCS814X_PHYS_BASE      0x40000000
-#define MCS814X_VIRT_BASE      MCS814X_IO_BASE
-
-#define MCS814X_UART           0x000DC000
-#define MCS814X_DBGLED         0x000EC000
-#define MCS814X_SYSDBG         0x000F8000
-#define MCS814X_SYSDBG_SIZE    0x50
-
-/* System configuration and bootstrap registers */
-#define SYSDBG_BS1             0x00
-#define  CPU_FREQ_SHIFT                27
-#define  CPU_FREQ_MASK         0x0F
-#define  SDRAM_FREQ_BIT                (1 << 22)
-
-#define SYSDBG_BS2             0x04
-#define  LED_CFG_MASK          0x03
-#define  CPU_MODE_SHIFT                23
-#define  CPU_MODE_MASK         0x03
-
-#define SYSDBG_SYSCTL_MAC      0x1d
-#define  BUF_SHIFT_BIT         (1 << 0)
-
-#define SYSDBG_SYSCTL          0x08
-#define  SYSCTL_EMAC           (1 << 0)
-#define  SYSCTL_EPHY           (1 << 0) /* active low */
-#define  SYSCTL_CIPHER         (1 << 16)
-
-#define SYSDBG_PLL_CTL         0x3C
-
-#endif /* __ASM_ARCH_MCS814X_H */
-
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/memory.h b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/memory.h
deleted file mode 100644 (file)
index ad87c7b..0000000
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET               UL(0x00000000)
-
-#endif
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/param.h b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/param.h
deleted file mode 100644 (file)
index 7ffe70b..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_PARAM_H
-#define __ASM_ARCH_PARAM_H
-
-#define HZ 100
-
-#endif
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/system.h b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/system.h
deleted file mode 100644 (file)
index cf5453d..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-       cpu_do_idle();
-}
-#endif
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/timex.h b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/timex.h
deleted file mode 100644 (file)
index f05c8ee..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * Timex specification for MCS814X
- */
-#define CLOCK_TICK_RATE                100
-
-#endif
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/uncompress.h b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/include/mach/uncompress.h
deleted file mode 100644 (file)
index cf3ed9a..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <linux/serial_reg.h>
-#include <asm/io.h>
-#include <mach/mcs814x.h>
-#include <mach/cpu.h>
-
-#define UART_SHIFT     (2)
-
-/* cannot be static because the code will be inlined */
-void __iomem *uart_base;
-
-static inline void putc(int c)
-{
-       while (!(__raw_readb(uart_base + (UART_LSR << UART_SHIFT)) & UART_LSR_TEMT));
-       __raw_writeb(c, uart_base + (UART_TX << UART_SHIFT));
-}
-
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-       if (soc_is_mcs8140())
-               uart_base = (void __iomem *)(MCS814X_PHYS_BASE +MCS814X_UART);
-}
-
-#define arch_decomp_wdog()
-
-#endif
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/irq.c b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/irq.c
deleted file mode 100644 (file)
index b49e511..0000000
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Moschip MCS814x generic interrupt controller routines
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under the GPLv2
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/irqdomain.h>
-
-#include <asm/exception.h>
-#include <asm/mach/irq.h>
-#include <mach/mcs814x.h>
-
-static void __iomem *mcs814x_intc_base;
-
-static void __init mcs814x_alloc_gc(void __iomem *base, unsigned int irq_start,
-                                       unsigned int num)
-{
-       struct irq_chip_generic *gc;
-       struct irq_chip_type *ct;
-
-       gc = irq_alloc_generic_chip("mcs814x-intc", 1,
-                       irq_start, base, handle_level_irq);
-       if (!gc)
-               panic("unable to allocate generic irq chip");
-
-       ct = gc->chip_types;
-       ct->chip.irq_ack = irq_gc_unmask_enable_reg;
-       ct->chip.irq_mask = irq_gc_mask_clr_bit;
-       ct->chip.irq_unmask = irq_gc_mask_set_bit;
-       ct->regs.mask = MCS814X_IRQ_MASK;
-       ct->regs.enable = MCS814X_IRQ_ICR;
-
-       irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
-               IRQ_NOREQUEST, 0);
-
-       /* Clear all interrupts */
-       writel_relaxed(0xffffffff, base + MCS814X_IRQ_ICR);
-}
-
-asmlinkage void __exception_irq_entry mcs814x_handle_irq(struct pt_regs *regs)
-{
-       u32 status, irq;
-
-       do {
-               /* read the status register */
-               status = __raw_readl(mcs814x_intc_base + MCS814X_IRQ_STS0);
-               if (!status)
-                       break;
-
-               irq = ffs(status) - 1;
-               status |= (1 << irq);
-               /* clear the interrupt */
-               __raw_writel(status, mcs814x_intc_base + MCS814X_IRQ_STS0);
-               /* call the generic handler */
-               handle_IRQ(irq, regs);
-
-       } while (1);
-}
-
-static const struct of_device_id mcs814x_intc_ids[] = {
-       { .compatible = "moschip,mcs814x-intc" },
-       { /* sentinel */ },
-};
-
-void __init mcs814x_of_irq_init(void)
-{
-       struct device_node *np;
-
-       np = of_find_matching_node(NULL, mcs814x_intc_ids);
-       if (!np)
-               panic("unable to find compatible intc node in dtb\n");
-
-       mcs814x_intc_base = of_iomap(np, 0);
-       if (!mcs814x_intc_base)
-               panic("unable to map intc cpu registers\n");
-
-       irq_domain_add_simple(np, 0);
-
-       of_node_put(np);
-
-       mcs814x_alloc_gc(mcs814x_intc_base, 0, 32);
-}
-
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/timer.c b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/timer.c
deleted file mode 100644 (file)
index 571f9e8..0000000
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Moschip MCS814x timer routines
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under GPLv2
- */
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/mach/time.h>
-#include <mach/mcs814x.h>
-
-/* Timer block registers */
-#define TIMER_VAL      0x00
-#define TIMER_CTL      0x04
-#define  TIMER_CTL_EN  0x01
-#define  TIMER_CTL_DBG 0x02
-
-static u32 last_reload;
-static u32 timer_correct;
-static u32 clock_rate;
-static u32 timer_reload_value;
-static void __iomem *mcs814x_timer_base;
-
-static inline unsigned long ticks2usecs(u32 x)
-{
-       return x / (clock_rate / 1000000);
-}
-
-/*
- * Returns number of ms since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-static unsigned long mcs814x_gettimeoffset(void)
-{
-       u32 ticks = readl_relaxed(mcs814x_timer_base + TIMER_VAL);
-
-       if (ticks < last_reload)
-               return ticks2usecs(ticks + (u32)(0xffffffff - last_reload));
-       else
-               return ticks2usecs(ticks - last_reload);
-}
-
-
-static irqreturn_t mcs814x_timer_interrupt(int irq, void *dev_id)
-{
-       u32 count = readl_relaxed(mcs814x_timer_base + TIMER_VAL);
-
-       /* take into account delay up to this moment */
-       last_reload = count + timer_correct + timer_reload_value;
-
-       if (last_reload < timer_reload_value) {
-               last_reload = timer_reload_value;
-       } else {
-               if (timer_correct == 0)
-                       timer_correct = readl_relaxed(mcs814x_timer_base + TIMER_VAL) - count;
-       }
-       writel_relaxed(last_reload, mcs814x_timer_base + TIMER_VAL);
-
-       timer_tick();
-
-       return IRQ_HANDLED;
-}
-
-static struct irqaction mcs814x_timer_irq = {
-       .name           = "mcs814x-timer",
-       .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-       .handler        = mcs814x_timer_interrupt,
-};
-
-static struct of_device_id mcs814x_timer_ids[] = {
-       { .compatible = "moschip,mcs814x-timer" },
-       { /* sentinel */ },
-};
-
-static void __init mcs814x_of_timer_init(void)
-{
-       struct device_node *np;
-       const unsigned int *intspec;
-
-       np = of_find_matching_node(NULL, mcs814x_timer_ids);
-       if (!np)
-               panic("unable to find compatible timer node in dtb");
-
-       mcs814x_timer_base = of_iomap(np, 0);
-       if (!mcs814x_timer_base)
-               panic("unable to remap timer cpu registers");
-
-       intspec = of_get_property(np, "interrupts", NULL);
-       if (!intspec)
-               panic("no interrupts property for timer");
-
-       mcs814x_timer_irq.irq = be32_to_cpup(intspec);
-}
-
-static void __init mcs814x_timer_init(void)
-{
-       struct clk *clk;
-
-       clk = clk_get_sys("timer0", NULL);
-       if (IS_ERR_OR_NULL(clk))
-               panic("unable to get timer0 clock");
-
-       clock_rate = clk_get_rate(clk);
-
-       mcs814x_of_timer_init();
-
-       pr_info("Timer frequency: %d (kHz)\n", clock_rate / 1000);
-
-       timer_reload_value = 0xffffffff - (clock_rate / HZ);
-
-       /* disable timer */
-       writel_relaxed(~TIMER_CTL_EN, mcs814x_timer_base + TIMER_CTL);
-       writel_relaxed(timer_reload_value, mcs814x_timer_base + TIMER_VAL);
-       last_reload = timer_reload_value;
-
-       setup_irq(mcs814x_timer_irq.irq, &mcs814x_timer_irq);
-       /* enable timer, stop timer in debug mode */
-       writel_relaxed(TIMER_CTL_EN | TIMER_CTL_DBG,
-               mcs814x_timer_base + TIMER_CTL);
-}
-
-struct sys_timer mcs814x_timer = {
-       .init   = mcs814x_timer_init,
-       .offset = mcs814x_gettimeoffset,
-};
diff --git a/target/linux/mcs814x/files-3.3/drivers/char/hw_random/mcs814x-rng.c b/target/linux/mcs814x/files-3.3/drivers/char/hw_random/mcs814x-rng.c
deleted file mode 100644 (file)
index 5e3d8f2..0000000
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * RNG driver for Moschip MCS814x SoC
- *
- * Copyright 2012 (C), Florian Fainelli <florian@openwrt.org>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/hw_random.h>
-#include <linux/io.h>
-#include <linux/of.h>
-
-#define STAT   0x00
-#define RND    0x04
-
-struct mcs814x_rng_priv {
-       void __iomem    *regs;
-};
-
-static int mcs814x_rng_data_read(struct hwrng *rng, u32 *buffer)
-{
-       struct mcs814x_rng_priv *priv = (struct mcs814x_rng_priv *)rng->priv;
-
-       *buffer = readl_relaxed(priv->regs + RND);
-
-       return 4;
-}
-
-static int mcs814x_rng_probe(struct platform_device *pdev)
-{
-       struct resource *res;
-       struct mcs814x_rng_priv *priv;
-       struct hwrng *rng;
-       int ret;
-
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!res)
-               return -ENODEV;
-
-       priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-       if (!priv) {
-               ret = -ENOMEM;
-               goto out;
-       }
-
-       rng = kzalloc(sizeof(*rng), GFP_KERNEL);
-       if (!rng) {
-               ret = -ENOMEM;
-               goto out_priv;
-       }
-
-       platform_set_drvdata(pdev, rng);
-       rng->priv = (unsigned long)priv;
-       rng->name = pdev->name;
-       rng->data_read = mcs814x_rng_data_read;
-
-       priv->regs = devm_request_and_ioremap(&pdev->dev, res);
-       if (!priv->regs) {
-               ret = -ENOMEM;
-               goto out_rng;
-       }
-
-       ret = hwrng_register(rng);
-       if (ret) {
-               dev_err(&pdev->dev, "failed to register hwrng driver\n");
-               goto out;
-       }
-
-       dev_info(&pdev->dev, "registered\n");
-
-       return ret;
-
-out_rng:
-       platform_set_drvdata(pdev, NULL);
-       kfree(rng);
-out_priv:
-       kfree(priv);
-out:
-       return ret;
-}
-
-static int mcs814x_rng_remove(struct platform_device *pdev)
-{
-       struct hwrng *rng = platform_get_drvdata(pdev);
-       struct mcs814x_rng_priv *priv = (struct mcs814x_rng_priv *)rng->priv;
-
-       hwrng_unregister(rng);
-       kfree(priv);
-       kfree(rng);
-       platform_set_drvdata(pdev, NULL);
-
-       return 0;
-}
-
-static const struct of_device_id mcs814x_rng_ids[] = {
-       { .compatible = "moschip,mcs814x-rng", },
-       { /* sentinel */ },
-};
-
-static struct platform_driver mcs814x_rng_driver = {
-       .driver = {
-               .name   = "mcs814x-rng",
-               .owner  = THIS_MODULE,
-               .of_match_table = mcs814x_rng_ids,
-       },
-       .probe  = mcs814x_rng_probe,
-       .remove = __devexit_p(mcs814x_rng_remove),
-};
-
-module_platform_driver(mcs814x_rng_driver);
-
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-MODULE_DESCRIPTION("H/W Random Number Generator (RNG) for Moschip MCS814x");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/mcs814x/files-3.3/drivers/gpio/gpio-mcs814x.c b/target/linux/mcs814x/files-3.3/drivers/gpio/gpio-mcs814x.c
deleted file mode 100644 (file)
index f138229..0000000
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Moschip MCS814x GPIO support
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under the GPLv2
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-struct mcs814x_gpio_chip {
-       void __iomem *regs;
-       struct gpio_chip chip;
-};
-
-#define GPIO_PIN       0x00
-#define GPIO_DIR       0x04
-
-#define to_mcs814x_gpio_chip(x)        container_of(x, struct mcs814x_gpio_chip, chip)
-
-static int mcs814x_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-       struct mcs814x_gpio_chip *mcs814x = to_mcs814x_gpio_chip(chip);
-
-       return readl_relaxed(mcs814x->regs + GPIO_PIN) & (1 << offset);
-}
-
-static void mcs814x_gpio_set(struct gpio_chip *chip,
-                               unsigned offset, int value)
-{
-       struct mcs814x_gpio_chip *mcs814x = to_mcs814x_gpio_chip(chip);
-       u32 mask;
-
-       mask = readl_relaxed(mcs814x->regs + GPIO_PIN);
-       if (value)
-               mask |= (1 << offset);
-       else
-               mask &= ~(1 << offset);
-       writel_relaxed(mask, mcs814x->regs + GPIO_PIN);
-}
-
-static int mcs814x_gpio_direction_output(struct gpio_chip *chip,
-                                       unsigned offset, int value)
-{
-       struct mcs814x_gpio_chip *mcs814x = to_mcs814x_gpio_chip(chip);
-       u32 mask;
-
-       mask = readl_relaxed(mcs814x->regs + GPIO_DIR);
-       mask &= ~(1 << offset);
-       writel_relaxed(mask, mcs814x->regs + GPIO_DIR);
-
-       return 0;
-}
-
-static int mcs814x_gpio_direction_input(struct gpio_chip *chip,
-                                       unsigned offset)
-{
-       struct mcs814x_gpio_chip *mcs814x = to_mcs814x_gpio_chip(chip);
-       u32 mask;
-
-       mask = readl_relaxed(mcs814x->regs + GPIO_DIR);
-       mask |= (1 << offset);
-       writel_relaxed(mask, mcs814x->regs + GPIO_DIR);
-
-       return 0;
-}
-
-static int __devinit mcs814x_gpio_probe(struct platform_device *pdev)
-{
-       struct resource *res;
-       struct mcs814x_gpio_chip *mcs814x_chip;
-       int ret;
-       const unsigned int *num_gpios;
-
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!res)
-               return -ENODEV;
-
-       num_gpios = of_get_property(pdev->dev.of_node, "num-gpios", NULL);
-       if (!num_gpios)
-               dev_err(&pdev->dev, "FIXME: no num-gpios property\n");
-
-       mcs814x_chip = kzalloc(sizeof(*mcs814x_chip), GFP_KERNEL);
-       if (!mcs814x_chip)
-               return -ENOMEM;
-
-       mcs814x_chip->regs = devm_request_and_ioremap(&pdev->dev, res);
-       if (!mcs814x_chip->regs) {
-               ret = -ENOMEM;
-               goto out;
-       }
-
-       platform_set_drvdata(pdev, mcs814x_chip);
-
-#ifdef CONFIG_OF_GPIO
-       mcs814x_chip->chip.of_node = pdev->dev.of_node;
-#endif
-
-       mcs814x_chip->chip.label = pdev->name;
-       mcs814x_chip->chip.get = mcs814x_gpio_get;
-       mcs814x_chip->chip.set = mcs814x_gpio_set;
-       mcs814x_chip->chip.direction_input = mcs814x_gpio_direction_input;
-       mcs814x_chip->chip.direction_output = mcs814x_gpio_direction_output;
-       mcs814x_chip->chip.ngpio = be32_to_cpup(num_gpios);
-       /* we want dynamic base allocation */
-       mcs814x_chip->chip.base = -1;
-
-       ret = gpiochip_add(&mcs814x_chip->chip);
-       if (ret) {
-               dev_err(&pdev->dev, "failed to register gpiochip\n");
-               goto out;
-       }
-
-       return 0;
-
-out:
-       platform_set_drvdata(pdev, NULL);
-       kfree(mcs814x_chip);
-       return ret;
-}
-
-static struct of_device_id mcs814x_gpio_ids[] __devinitdata = {
-       { .compatible = "moschip,mcs814x-gpio" },
-       { /* sentinel */ },
-};
-
-static struct platform_driver mcs814x_gpio_driver = {
-       .driver = {
-               .name   = "mcs814x-gpio",
-               .owner  = THIS_MODULE,
-               .of_match_table = mcs814x_gpio_ids,
-       },
-       .probe  = mcs814x_gpio_probe,
-};
-
-int __init mcs814x_gpio_init(void)
-{
-       return platform_driver_register(&mcs814x_gpio_driver);
-}
-postcore_initcall(mcs814x_gpio_init);
diff --git a/target/linux/mcs814x/files-3.3/drivers/net/ethernet/mcs8140/Kconfig b/target/linux/mcs814x/files-3.3/drivers/net/ethernet/mcs8140/Kconfig
deleted file mode 100644 (file)
index 8fa38a4..0000000
+++ /dev/null
@@ -1,4 +0,0 @@
-config  NUPORT_ETHERNET_DRIVER
-       tristate "MCS8140 Ethernet driver"
-       depends on ETHERNET && ARCH_MCS814X
-          help
diff --git a/target/linux/mcs814x/files-3.3/drivers/net/ethernet/mcs8140/Makefile b/target/linux/mcs814x/files-3.3/drivers/net/ethernet/mcs8140/Makefile
deleted file mode 100644 (file)
index 9719c51..0000000
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_NUPORT_ETHERNET_DRIVER)   += mcs8140.o
-
-mcs8140-objs  := nuport_mac.o 
diff --git a/target/linux/mcs814x/files-3.3/drivers/net/ethernet/mcs8140/nuport_mac.c b/target/linux/mcs814x/files-3.3/drivers/net/ethernet/mcs8140/nuport_mac.c
deleted file mode 100644 (file)
index f11f425..0000000
+++ /dev/null
@@ -1,1206 +0,0 @@
-/*
- * Moschip MCS8140 Ethernet MAC driver
- *
- * Copyright (C) 2003, Moschip Semiconductors
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under GPLv2
- */
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_mdio.h>
-#include <linux/of_net.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/phy.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/unaligned.h>
-#include <asm/sizes.h>
-
-/* Hardware registers */
-#define MAC_BASE_ADDR          ((priv->mac_base))
-
-#define CTRL_REG               (MAC_BASE_ADDR)
-#define  MII_BUSY              (1 << 0)
-#define  MII_WRITE             (1 << 1)
-#define  RX_ENABLE             (1 << 2)
-#define  TX_ENABLE             (1 << 3)
-#define  DEFER_CHECK           (1 << 5)
-#define  STRIP_PAD             (1 << 8)
-#define  DRTRY_DISABLE         (1 << 10)
-#define  FULL_DUPLEX           (1 << 20)
-#define  HBD_DISABLE           (1 << 28)
-#define MAC_ADDR_HIGH_REG      (MAC_BASE_ADDR + 0x04)
-#define MAC_ADDR_LOW_REG       (MAC_BASE_ADDR + 0x08)
-#define MII_ADDR_REG           (MAC_BASE_ADDR + 0x14)
-#define  MII_ADDR_SHIFT                (11)
-#define  MII_REG_SHIFT         (6)
-#define MII_DATA_REG           (MAC_BASE_ADDR + 0x18)
-/* Link interrupt registers */
-#define LINK_INT_CSR           (MAC_BASE_ADDR + 0xD0)
-#define  LINK_INT_EN           (1 << 0)
-#define  LINK_PHY_ADDR_SHIFT   (1)
-#define  LINK_PHY_REG_SHIFT    (6)
-#define  LINK_BIT_UP_SHIFT     (11)
-#define  LINK_UP               (1 << 16)
-#define LINK_INT_POLL_TIME     (MAC_BASE_ADDR + 0xD4)
-#define  LINK_POLL_MASK                ((1 << 20) - 1)
-
-#define DMA_CHAN_WIDTH         32
-#define DMA_RX_CHAN            0
-#define DMA_TX_CHAN            2
-
-/* Receive DMA registers */
-#define RX_DMA_BASE            ((priv->dma_base) + \
-                               (DMA_CHAN_WIDTH * DMA_RX_CHAN))
-#define RX_BUFFER_ADDR         (RX_DMA_BASE + 0x00)
-#define RX_MAX_BYTES           (RX_DMA_BASE + 0x04)
-#define RX_ACT_BYTES           (RX_DMA_BASE + 0x08)
-#define RX_START_DMA           (RX_DMA_BASE + 0x0C)
-#define  RX_DMA_ENABLE         (1 << 0)
-#define  RX_DMA_RESET          (1 << 1)
-#define  RX_DMA_STATUS_FIFO    (1 << 12)
-#define RX_DMA_ENH             (RX_DMA_BASE + 0x14)
-#define  RX_DMA_INT_ENABLE     (1 << 1)
-
-/* Transmit DMA registers */
-#define TX_DMA_BASE            ((priv->dma_base) + \
-                               (DMA_CHAN_WIDTH * DMA_TX_CHAN))
-#define TX_BUFFER_ADDR         (TX_DMA_BASE + 0x00)
-#define TX_PKT_BYTES           (TX_DMA_BASE + 0x04)
-#define TX_BYTES_SENT          (TX_DMA_BASE + 0x08)
-#define TX_START_DMA           (TX_DMA_BASE + 0x0C)
-#define  TX_DMA_ENABLE         (1 << 0)
-#define  TX_DMA_START_FRAME    (1 << 2)
-#define  TX_DMA_END_FRAME      (1 << 3)
-#define  TX_DMA_PAD_DISABLE    (1 << 8)
-#define  TX_DMA_CRC_DISABLE    (1 << 9)
-#define  TX_DMA_FIFO_FULL      (1 << 16)
-#define  TX_DMA_FIFO_EMPTY     (1 << 17)
-#define  TX_DMA_STATUS_AVAIL   (1 << 18)
-#define  TX_DMA_RESET          (1 << 24)
-#define TX_DMA_STATUS          (TX_DMA_BASE + 0x10)
-#define TX_DMA_ENH             (TX_DMA_BASE + 0x14)
-#define  TX_DMA_ENH_ENABLE     (1 << 0)
-#define  TX_DMA_INT_FIFO       (1 << 1)
-
-#define RX_ALLOC_SIZE          SZ_2K
-#define MAX_ETH_FRAME_SIZE     1536
-#define RX_SKB_TAILROOM                128
-#define RX_SKB_HEADROOM                (RX_ALLOC_SIZE  - \
-                               (MAX_ETH_FRAME_SIZE + RX_SKB_TAILROOM) + 0)
-
-                       /* WDT     Late COL    Lenght     COL      Type */
-#define ERROR_FILTER_MASK ((1<<14) | (1<<15) | (1<<16) | (1<<17) | (0<<18) | \
-                       /* MII    Dribbling    CRC    Len/type   Control */\
-                       (1<<19) | (1<<20) | (1<<21) | (0<<24) | (1<<25) | \
-                       /* Unsup   Missed */\
-                       (1<<26) | (0<<31))
-#define  TX_RING_SIZE  30
-#define  RX_RING_SIZE  30
-
-static inline u32 nuport_mac_readl(void __iomem *reg)
-{
-       return readl_relaxed(reg);
-}
-
-static inline u8 nuport_mac_readb(void __iomem *reg)
-{
-       return readb_relaxed(reg);
-}
-
-static inline void nuport_mac_writel(u32 value, void __iomem *reg)
-{
-       writel_relaxed(value, reg);
-}
-
-static inline void nuport_mac_writeb(u8 value, void __iomem *reg)
-{
-       writel_relaxed(value, reg);
-}
-
-/* MAC private data */
-struct nuport_mac_priv {
-       spinlock_t lock;
-
-       void __iomem    *mac_base;
-       void __iomem    *dma_base;
-
-       int             rx_irq;
-       int             tx_irq;
-       int             link_irq;
-       struct clk      *emac_clk;
-       struct clk      *ephy_clk;
-
-       /* Transmit buffers */
-       struct sk_buff *tx_skb[TX_RING_SIZE];
-       dma_addr_t tx_addr;
-       unsigned int valid_txskb[TX_RING_SIZE];
-       unsigned int cur_tx;
-       unsigned int dma_tx;
-       unsigned int tx_full;
-
-       /* Receive buffers */
-       struct sk_buff *rx_skb[RX_RING_SIZE];
-       dma_addr_t rx_addr;
-       unsigned int irq_rxskb[RX_RING_SIZE];
-       int pkt_len[RX_RING_SIZE];
-       unsigned int cur_rx;
-       unsigned int dma_rx;
-       unsigned int rx_full;
-
-       unsigned int first_pkt;
-
-       /* Private data */
-       struct napi_struct napi;
-       struct net_device       *dev;
-       struct platform_device  *pdev;
-       struct mii_bus          *mii_bus;
-       struct phy_device       *phydev;
-       struct device_node      *phy_node;
-       phy_interface_t         phy_interface;
-       int                     old_link;
-       int                     old_duplex;
-       u32                     msg_level;
-       unsigned int            buffer_shifting_len;
-};
-
-static inline int nuport_mac_mii_busy_wait(struct nuport_mac_priv *priv)
-{
-       unsigned long curr;
-       unsigned long finish = jiffies + 3 * HZ;
-
-       do {
-               curr = jiffies;
-               if (!(nuport_mac_readl(MII_ADDR_REG) & MII_BUSY))
-                       return 0;
-               cpu_relax();
-       } while (!time_after_eq(curr, finish));
-
-       return -EBUSY;
-}
-
-/* Read from PHY registers */
-static int nuport_mac_mii_read(struct mii_bus *bus,
-                               int mii_id, int regnum)
-{
-       struct net_device *dev = bus->priv;
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-       int ret;
-       u32 val = 0;
-
-       ret = nuport_mac_mii_busy_wait(priv);
-       if (ret)
-               return ret;
-
-       val |= (mii_id << MII_ADDR_SHIFT) | (regnum << MII_REG_SHIFT) | MII_BUSY;
-       nuport_mac_writel(val, MII_ADDR_REG);
-       ret = nuport_mac_mii_busy_wait(priv);
-       if (ret)
-               return ret;
-
-       return nuport_mac_readl(MII_DATA_REG);
-}
-
-static int nuport_mac_mii_write(struct mii_bus *bus, int mii_id,
-                               int regnum, u16 value)
-{
-       struct net_device *dev = bus->priv;
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-       int ret;
-       u32 val = 0;
-
-       ret = nuport_mac_mii_busy_wait(priv);
-       if (ret)
-               return ret;
-
-       val |= (mii_id << MII_ADDR_SHIFT) | (regnum << MII_REG_SHIFT);
-       val |= MII_BUSY | MII_WRITE;
-       nuport_mac_writel(value, MII_DATA_REG);
-       nuport_mac_writel(val, MII_ADDR_REG);
-
-       return nuport_mac_mii_busy_wait(priv);
-}
-
-static int nuport_mac_mii_reset(struct mii_bus *bus)
-{
-       return 0;
-}
-
-static int nuport_mac_start_tx_dma(struct nuport_mac_priv *priv,
-                                       struct sk_buff *skb)
-{
-       u32 reg;
-       unsigned int timeout = 2048;
-
-       while (timeout--) {
-               reg = nuport_mac_readl(TX_START_DMA);
-               if (!(reg & TX_DMA_ENABLE)) {
-                       netdev_dbg(priv->dev, "dma ready\n");
-                       break;
-               }
-               cpu_relax();
-       }
-
-       if (!timeout)
-               return -EBUSY;
-
-       priv->tx_addr = dma_map_single(&priv->pdev->dev, skb->data,
-                       skb->len, DMA_TO_DEVICE);
-       if (dma_mapping_error(&priv->pdev->dev, priv->tx_addr))
-               return -ENOMEM;
-
-       /* enable enhanced mode */
-       nuport_mac_writel(TX_DMA_ENH_ENABLE, TX_DMA_ENH);
-       nuport_mac_writel(priv->tx_addr, TX_BUFFER_ADDR);
-       nuport_mac_writel((skb->len) - 1, TX_PKT_BYTES);
-       wmb();
-       reg = TX_DMA_ENABLE | TX_DMA_START_FRAME | TX_DMA_END_FRAME;
-       nuport_mac_writel(reg, TX_START_DMA);
-
-       return 0;
-}
-
-static void nuport_mac_reset_tx_dma(struct nuport_mac_priv *priv)
-{
-       u32 reg;
-
-       reg = nuport_mac_readl(TX_START_DMA);
-       reg |= TX_DMA_RESET;
-       nuport_mac_writel(reg, TX_START_DMA);
-}
-
-static int nuport_mac_start_rx_dma(struct nuport_mac_priv *priv,
-                                       struct sk_buff *skb)
-{
-       u32 reg;
-       unsigned int timeout = 2048;
-
-       while (timeout--) {
-               reg = nuport_mac_readl(RX_START_DMA);
-               if (!(reg & RX_DMA_ENABLE)) {
-                       netdev_dbg(priv->dev, "dma ready\n");
-                       break;
-               }
-               cpu_relax();
-       }
-
-       if (!timeout)
-               return -EBUSY;
-
-       priv->rx_addr = dma_map_single(&priv->pdev->dev, skb->data,
-                               RX_ALLOC_SIZE, DMA_FROM_DEVICE);
-       if (dma_mapping_error(&priv->pdev->dev, priv->rx_addr))
-               return -ENOMEM;
-
-       nuport_mac_writel(priv->rx_addr, RX_BUFFER_ADDR);
-       wmb();
-       nuport_mac_writel(RX_DMA_ENABLE, RX_START_DMA);
-
-       return 0;
-}
-
-static void nuport_mac_reset_rx_dma(struct nuport_mac_priv *priv)
-{
-       u32 reg;
-
-       reg = nuport_mac_readl(RX_START_DMA);
-       reg |= RX_DMA_RESET;
-       nuport_mac_writel(reg, RX_START_DMA);
-}
-
-/* I suppose this might do something, but I am not sure actually */
-static void nuport_mac_disable_rx_dma(struct nuport_mac_priv *priv)
-{
-       u32 reg;
-
-       reg = nuport_mac_readl(RX_DMA_ENH);
-       reg &= ~RX_DMA_INT_ENABLE;
-       nuport_mac_writel(reg, RX_DMA_ENH);
-}
-
-static void nuport_mac_enable_rx_dma(struct nuport_mac_priv *priv)
-{
-       u32 reg;
-
-       reg = nuport_mac_readl(RX_DMA_ENH);
-       reg |= RX_DMA_INT_ENABLE;
-       nuport_mac_writel(reg, RX_DMA_ENH);
-}
-
-/* Add packets to the transmit queue */
-static int nuport_mac_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-       unsigned long flags;
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-       int ret;
-
-       if (netif_queue_stopped(dev)) {
-               netdev_warn(dev, "netif queue was stopped, restarting\n");
-               netif_start_queue(dev);
-       }
-
-       spin_lock_irqsave(&priv->lock, flags);
-       if (priv->first_pkt) {
-               ret = nuport_mac_start_tx_dma(priv, skb);
-               if (ret) {
-                       netif_stop_queue(dev);
-                       spin_unlock_irqrestore(&priv->lock, flags);
-                       netdev_err(dev, "transmit path busy\n");
-                       return NETDEV_TX_BUSY;
-               }
-               priv->first_pkt = 0;
-       }
-
-       priv->tx_skb[priv->cur_tx] = skb;
-       dev->stats.tx_bytes += skb->len;
-       dev->stats.tx_packets++;
-       priv->valid_txskb[priv->cur_tx] = 1;
-       priv->cur_tx++;
-       dev->trans_start = jiffies;
-
-       if (priv->cur_tx >= TX_RING_SIZE)
-               priv->cur_tx = 0;
-
-       spin_unlock_irqrestore(&priv->lock, flags);
-
-       if (priv->valid_txskb[priv->cur_tx]) {
-               priv->tx_full = 1;
-               netdev_err(dev, "stopping queue\n");
-               netif_stop_queue(dev);
-       }
-
-       return NETDEV_TX_OK;
-}
-
-static void nuport_mac_adjust_link(struct net_device *dev)
-{
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-       struct phy_device *phydev = priv->phydev;
-       unsigned int status_changed = 0;
-       u32 reg;
-
-       BUG_ON(!phydev);
-
-       if (priv->old_link != phydev->link) {
-               status_changed = 1;
-               priv->old_link = phydev->link;
-       }
-
-       if (phydev->link && (priv->old_duplex != phydev->duplex)) {
-               reg = nuport_mac_readl(CTRL_REG);
-               if (phydev->duplex == DUPLEX_FULL)
-                       reg |= DUPLEX_FULL;
-               else
-                       reg &= ~DUPLEX_FULL;
-               nuport_mac_writel(reg, CTRL_REG);
-
-               status_changed = 1;
-               priv->old_duplex = phydev->duplex;
-       }
-
-       if (!status_changed)
-               return;
-
-       pr_info("%s: link %s", dev->name, phydev->link ?
-               "UP" : "DOWN");
-       if (phydev->link) {
-               pr_cont(" - %d/%s", phydev->speed,
-               phydev->duplex == DUPLEX_FULL ? "full" : "half");
-       }
-       pr_cont("\n");
-}
-
-static irqreturn_t nuport_mac_link_interrupt(int irq, void *dev_id)
-{
-       struct net_device *dev = dev_id;
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-       u32 reg;
-       u8 phy_addr;
-       unsigned long flags;
-       irqreturn_t ret = IRQ_HANDLED;
-
-       spin_lock_irqsave(&priv->lock, flags);
-       reg = nuport_mac_readl(LINK_INT_CSR);
-       phy_addr = (reg >> LINK_PHY_ADDR_SHIFT) & (PHY_MAX_ADDR - 1);
-
-       if (phy_addr != priv->phydev->addr) {
-               netdev_err(dev, "spurious PHY irq (phy: %d)\n", phy_addr);
-               ret = IRQ_NONE;
-               goto out;
-       }
-
-       priv->phydev->link = (reg & LINK_UP);
-       nuport_mac_adjust_link(dev);
-
-out:
-       spin_unlock_irqrestore(&priv->lock, flags);
-       return ret;
-}
-
-static irqreturn_t nuport_mac_tx_interrupt(int irq, void *dev_id)
-{
-       struct net_device *dev = (struct net_device *)dev_id;
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-       struct sk_buff *skb;
-       unsigned long flags;
-       int ret;
-       u32 reg;
-
-       spin_lock_irqsave(&priv->lock, flags);
-       /* clear status word available if ready */
-       reg = nuport_mac_readl(TX_START_DMA);
-       if (reg & TX_DMA_STATUS_AVAIL) {
-               nuport_mac_writel(reg, TX_START_DMA);
-               reg = nuport_mac_readl(TX_DMA_STATUS);
-
-               if (reg & 1)
-                       dev->stats.tx_errors++;
-       } else
-               netdev_dbg(dev, "no status word: %08x\n", reg);
-
-       skb = priv->tx_skb[priv->dma_tx];
-       priv->tx_skb[priv->dma_tx] = NULL;
-       priv->valid_txskb[priv->dma_tx] = 0;
-       dma_unmap_single(&priv->pdev->dev, priv->rx_addr, skb->len,
-                               DMA_TO_DEVICE);
-       dev_kfree_skb_irq(skb);
-
-       priv->dma_tx++;
-       if (priv->dma_tx >= TX_RING_SIZE)
-               priv->dma_tx = 0;
-
-       if (!priv->valid_txskb[priv->dma_tx])
-               priv->first_pkt = 1;
-       else {
-               ret = nuport_mac_start_tx_dma(priv, priv->tx_skb[priv->dma_tx]);
-               if (ret)
-                       netdev_err(dev, "failed to restart TX dma\n");
-       }
-
-       if (priv->tx_full) {
-               netdev_dbg(dev, "restarting transmit queue\n");
-               netif_wake_queue(dev);
-               priv->tx_full = 0;
-       }
-
-       spin_unlock_irqrestore(&priv->lock, flags);
-
-       return IRQ_HANDLED;
-}
-
-static unsigned int nuport_mac_has_work(struct nuport_mac_priv *priv)
-{
-       unsigned int i;
-
-       for (i = 0; i < RX_RING_SIZE; i++)
-               if (priv->rx_skb[i])
-                       return 1;
-
-       return 0;
-}
-
-static irqreturn_t nuport_mac_rx_interrupt(int irq, void *dev_id)
-{
-       struct net_device *dev = (struct net_device *)dev_id;
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-       unsigned long flags;
-       int ret;
-
-       spin_lock_irqsave(&priv->lock, flags);
-       if (!priv->rx_full) {
-               priv->pkt_len[priv->dma_rx] = nuport_mac_readl(RX_ACT_BYTES) - 4;
-               priv->irq_rxskb[priv->dma_rx] = 0;
-               priv->dma_rx++;
-
-               if (priv->dma_rx >= RX_RING_SIZE)
-                       priv->dma_rx = 0;
-       } else
-               priv->rx_full = 0;
-
-       if (priv->irq_rxskb[priv->dma_rx] == 1) {
-               ret = nuport_mac_start_rx_dma(priv, priv->rx_skb[priv->dma_rx]);
-               if (ret)
-                       netdev_err(dev, "failed to start rx dma\n");
-       } else {
-               priv->rx_full = 1;
-               netdev_dbg(dev, "RX ring full\n");
-       }
-
-       if (likely(nuport_mac_has_work(priv))) {
-               /* find a way to disable DMA rx irq */
-               nuport_mac_disable_rx_dma(priv);
-               napi_schedule(&priv->napi);
-       }
-       spin_unlock_irqrestore(&priv->lock, flags);
-
-       return IRQ_HANDLED;
-}
-
-/* Process received packets in tasklet */
-static int nuport_mac_rx(struct net_device *dev, int limit)
-{
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-       struct sk_buff *skb;
-       int len, status;
-       int count = 0;
-
-       while (count < limit && !priv->irq_rxskb[priv->cur_rx]) {
-               skb = priv->rx_skb[priv->cur_rx];
-               len = priv->pkt_len[priv->cur_rx];
-
-               /* Remove 2 bytes added by RX buffer shifting */
-               len = len - priv->buffer_shifting_len;
-               skb->data = skb->data + priv->buffer_shifting_len;
-
-               /* Get packet status */
-               status = get_unaligned((u32 *) (skb->data + len));
-
-               dma_unmap_single(&priv->pdev->dev, priv->rx_addr, skb->len,
-                               DMA_FROM_DEVICE);
-
-               /* packet filter failed */
-               if (!(status & (1 << 30))) {
-                       dev_kfree_skb_irq(skb);
-                       goto exit;
-               }
-
-               /* missed frame */
-               if (status & (1 << 31)) {
-                       dev->stats.rx_missed_errors++;
-                       dev_kfree_skb_irq(skb);
-                       goto exit;
-               }
-
-               /* Not ethernet type */
-               if ((!(status & (1 << 18))) || (status & ERROR_FILTER_MASK))
-                       dev->stats.rx_errors++;
-
-               if (len > MAX_ETH_FRAME_SIZE) {
-                       dev_kfree_skb_irq(skb);
-                       goto exit;
-               } else
-                       skb_put(skb, len);
-
-               skb->protocol = eth_type_trans(skb, dev);
-               dev->stats.rx_packets++;
-
-               if (status & (1 << 29))
-                       skb->pkt_type = PACKET_OTHERHOST;
-               if (status & (1 << 27))
-                       skb->pkt_type = PACKET_MULTICAST;
-               if (status & (1 << 28))
-                       skb->pkt_type = PACKET_BROADCAST;
-
-               skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-               /* Pass the received packet to network layer */
-               status = netif_receive_skb(skb);
-               if (status != NET_RX_DROP)
-                       dev->stats.rx_bytes += len - 4; /* Without CRC */
-               else
-                       dev->stats.rx_dropped++;
-
-               dev->last_rx = jiffies;
-
-exit:
-               skb = netdev_alloc_skb(dev, RX_ALLOC_SIZE);
-               if (!skb)
-                       goto out;
-
-               skb_reserve(skb, RX_SKB_HEADROOM);
-               priv->rx_skb[priv->cur_rx] = skb;
-               priv->irq_rxskb[priv->cur_rx] = 1;
-               priv->cur_rx++;
-
-               if (priv->cur_rx >= RX_RING_SIZE)
-                       priv->cur_rx = 0;
-               count++;
-       }
-out:
-       return count;
-}
-
-static int nuport_mac_poll(struct napi_struct *napi, int budget)
-{
-       struct nuport_mac_priv *priv =
-               container_of(napi, struct nuport_mac_priv, napi);
-       struct net_device *dev = priv->dev;
-       int work_done;
-
-       work_done = nuport_mac_rx(dev, budget);
-
-       if (work_done < budget) {
-               napi_complete(napi);
-               nuport_mac_enable_rx_dma(priv);
-       }
-
-       return work_done;
-}
-
-static void nuport_mac_init_tx_ring(struct nuport_mac_priv *priv)
-{
-       int i;
-
-       priv->cur_tx = priv->dma_tx = priv->tx_full = 0;
-       for (i = 0; i < TX_RING_SIZE; i++) {
-               priv->tx_skb[i] = NULL;
-               priv->valid_txskb[i] = 0;
-       }
-       priv->first_pkt = 1;
-}
-
-static int nuport_mac_init_rx_ring(struct net_device *dev)
-{
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-       struct sk_buff *skb;
-       int i;
-
-       priv->cur_rx = priv->dma_rx = priv->rx_full = 0;
-
-       for (i = 0; i < RX_RING_SIZE; i++) {
-               skb = netdev_alloc_skb(dev, RX_ALLOC_SIZE);
-               if (!skb)
-                       return -ENOMEM;
-               skb_reserve(skb, RX_SKB_HEADROOM);
-               priv->rx_skb[i] = skb;
-               priv->irq_rxskb[i] = 1;
-       }
-
-       return 0;
-}
-
-static void nuport_mac_free_rx_ring(struct nuport_mac_priv *priv)
-{
-       int i;
-
-       for (i = 0; i < RX_RING_SIZE; i++) {
-               if (!priv->rx_skb[i])
-                       continue;
-
-               dev_kfree_skb(priv->rx_skb[i]);
-               priv->rx_skb[i] = NULL;
-       }
-
-       if (priv->rx_addr)
-               dma_unmap_single(&priv->pdev->dev, priv->rx_addr, RX_ALLOC_SIZE,
-                               DMA_TO_DEVICE);
-}
-
-static void nuport_mac_read_mac_address(struct net_device *dev)
-{
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-       int i;
-
-       for (i = 0; i < 4; i++)
-               dev->dev_addr[i] = nuport_mac_readb(MAC_ADDR_LOW_REG + i);
-       dev->dev_addr[4] = nuport_mac_readb(MAC_ADDR_HIGH_REG);
-       dev->dev_addr[5] = nuport_mac_readb(MAC_ADDR_HIGH_REG + 1);
-
-       if (!is_valid_ether_addr(dev->dev_addr)) {
-               dev_info(&priv->pdev->dev, "using random address\n");
-               random_ether_addr(dev->dev_addr);
-       }
-}
-
-static int nuport_mac_change_mac_address(struct net_device *dev, void *mac_addr)
-{
-       struct sockaddr *addr = mac_addr;
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-       unsigned long *temp = (unsigned long *)dev->dev_addr;
-       u32 high, low;
-
-       if (netif_running(dev))
-               return -EBUSY;
-
-       memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
-
-       spin_lock_irq(&priv->lock);
-
-       nuport_mac_writel(*temp, MAC_ADDR_LOW_REG);
-       temp = (unsigned long *)(dev->dev_addr + 4);
-       nuport_mac_writel(*temp, MAC_ADDR_HIGH_REG);
-
-       low = nuport_mac_readl(MAC_ADDR_LOW_REG);
-       high = nuport_mac_readl(MAC_ADDR_HIGH_REG);
-
-       spin_unlock_irq(&priv->lock);
-
-       return 0;
-}
-
-static int nuport_mac_open(struct net_device *dev)
-{
-       int ret;
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-       unsigned long flags;
-       u32 reg = 0;
-
-       ret = clk_enable(priv->emac_clk);
-       if (ret) {
-               netdev_err(dev, "failed to enable EMAC clock\n");
-               return ret;
-       }
-
-       /* Set MAC into full duplex mode by default */
-       reg |= RX_ENABLE | TX_ENABLE;
-       reg |= DEFER_CHECK | STRIP_PAD | DRTRY_DISABLE;
-       reg |= FULL_DUPLEX | HBD_DISABLE;
-       nuport_mac_writel(reg, CTRL_REG);
-
-       /* set mac address in hardware in case it was not already */
-       nuport_mac_change_mac_address(dev, dev->dev_addr);
-
-       ret = request_irq(priv->link_irq, &nuport_mac_link_interrupt,
-                               0, dev->name, dev);
-       if (ret) {
-               netdev_err(dev, "unable to request link interrupt\n");
-               goto out_emac_clk;
-       }
-
-       ret = request_irq(priv->tx_irq, &nuport_mac_tx_interrupt,
-                               0, dev->name, dev);
-       if (ret) {
-               netdev_err(dev, "unable to request rx interrupt\n");
-               goto out_link_irq;
-       }
-
-       /* Enable link interrupt monitoring for our PHY address */
-       reg = LINK_INT_EN | (priv->phydev->addr << LINK_PHY_ADDR_SHIFT);
-       /* MII_BMSR register to be watched */
-       reg |= (1 << LINK_PHY_REG_SHIFT);
-       /* BMSR_STATUS to be watched in particular */
-       reg |= (2 << LINK_BIT_UP_SHIFT);
-
-       spin_lock_irqsave(&priv->lock, flags);
-       nuport_mac_writel(reg, LINK_INT_CSR);
-       nuport_mac_writel(LINK_POLL_MASK, LINK_INT_POLL_TIME);
-       spin_unlock_irqrestore(&priv->lock, flags);
-
-       phy_start(priv->phydev);
-
-       ret = request_irq(priv->rx_irq, &nuport_mac_rx_interrupt,
-                               0, dev->name, dev);
-       if (ret) {
-               netdev_err(dev, "unable to request tx interrupt\n");
-               goto out_tx_irq;
-       }
-
-       netif_start_queue(dev);
-
-       nuport_mac_init_tx_ring(priv);
-
-       ret = nuport_mac_init_rx_ring(dev);
-       if (ret) {
-               netdev_err(dev, "rx ring init failed\n");
-               goto out_rx_skb;
-       }
-
-       nuport_mac_reset_tx_dma(priv);
-       nuport_mac_reset_rx_dma(priv);
-
-       /* Start RX DMA */
-       spin_lock_irqsave(&priv->lock, flags);
-       ret = nuport_mac_start_rx_dma(priv, priv->rx_skb[0]);
-       spin_unlock_irqrestore(&priv->lock, flags);
-
-       napi_enable(&priv->napi);
-
-       return ret;
-
-out_rx_skb:
-       nuport_mac_free_rx_ring(priv);
-       free_irq(priv->rx_irq, dev);
-out_tx_irq:
-       free_irq(priv->tx_irq, dev);
-out_link_irq:
-       free_irq(priv->link_irq, dev);
-out_emac_clk:
-       clk_disable(priv->emac_clk);
-       return ret;
-}
-
-static int nuport_mac_close(struct net_device *dev)
-{
-       u32 reg;
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-
-       spin_lock_irq(&priv->lock);
-       reg = nuport_mac_readl(CTRL_REG);
-       reg &= ~(RX_ENABLE | TX_ENABLE);
-       nuport_mac_writel(reg, CTRL_REG);
-
-       napi_disable(&priv->napi);
-       netif_stop_queue(dev);
-
-       free_irq(priv->link_irq, dev);
-       /* disable PHY polling */
-       nuport_mac_writel(0, LINK_INT_CSR);
-       nuport_mac_writel(0, LINK_INT_POLL_TIME);
-       phy_stop(priv->phydev);
-
-       free_irq(priv->tx_irq, dev);
-       free_irq(priv->rx_irq, dev);
-       spin_unlock_irq(&priv->lock);
-
-       nuport_mac_free_rx_ring(priv);
-
-       clk_disable(priv->emac_clk);
-
-       return 0;
-}
-
-static void nuport_mac_tx_timeout(struct net_device *dev)
-{
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-       unsigned int i;
-
-       netdev_warn(dev, "transmit timeout, attempting recovery\n");
-
-       netdev_info(dev, "TX DMA regs\n");
-       for (i = 0; i < DMA_CHAN_WIDTH; i += 4)
-               netdev_info(dev, "[%02x]: 0x%08x\n", i, nuport_mac_readl(TX_DMA_BASE + i));
-       netdev_info(dev, "RX DMA regs\n");
-       for (i = 0; i < DMA_CHAN_WIDTH; i += 4)
-               netdev_info(dev, "[%02x]: 0x%08x\n", i, nuport_mac_readl(RX_DMA_BASE + i));
-
-       nuport_mac_init_tx_ring(priv);
-       nuport_mac_reset_tx_dma(priv);
-
-       netif_wake_queue(dev);
-}
-
-static int nuport_mac_mii_probe(struct net_device *dev)
-{
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-       struct phy_device *phydev = NULL;
-       int ret;
-
-       ret = clk_enable(priv->ephy_clk);
-       if (ret) {
-               netdev_err(dev, "unable to enable ePHY clk\n");
-               return ret;
-       }
-
-       phydev = phy_find_first(priv->mii_bus);
-       if (!phydev) {
-               netdev_err(dev, "no PHYs found\n");
-               ret = -ENODEV;
-               goto out;
-       }
-
-       phydev = of_phy_connect(dev, priv->phy_node,
-                       nuport_mac_adjust_link, 0,
-                       priv->phy_interface);
-       if (IS_ERR(phydev)) {
-               netdev_err(dev, "could not attach PHY\n");
-               ret = PTR_ERR(phydev);
-               goto out;
-       }
-
-       phydev->supported &= PHY_BASIC_FEATURES;
-       phydev->advertising = phydev->supported;
-       priv->phydev = phydev;
-       priv->old_link = 1;
-       priv->old_duplex = DUPLEX_FULL;
-
-       dev_info(&priv->pdev->dev, "attached PHY driver [%s] "
-               "(mii_bus:phy_addr=%d)\n",
-               phydev->drv->name, phydev->addr);
-
-       return 0;
-
-out:
-       /* disable the Ethernet PHY clock for the moment */
-       clk_disable(priv->ephy_clk);
-
-       return ret;
-}
-
-static void nuport_mac_ethtool_drvinfo(struct net_device *dev,
-                                       struct ethtool_drvinfo *info)
-{
-       strncpy(info->driver, "nuport-mac", sizeof(info->driver));
-       strncpy(info->version, "0.1", sizeof(info->version));
-       strncpy(info->fw_version, "N/A", sizeof(info->fw_version));
-       strncpy(info->bus_info, "internal", sizeof(info->bus_info));
-       info->n_stats = 0;
-       info->testinfo_len = 0;
-       info->regdump_len = 0;
-       info->eedump_len = 0;
-}
-
-static int nuport_mac_ethtool_get_settings(struct net_device *dev,
-                                       struct ethtool_cmd *cmd)
-{
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-
-       if (priv->phydev)
-               return phy_ethtool_gset(priv->phydev, cmd);
-
-       return -EINVAL;
-}
-
-static int nuport_mac_ethtool_set_settings(struct net_device *dev,
-                                       struct ethtool_cmd *cmd)
-{
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-
-       if (priv->phydev)
-               return phy_ethtool_sset(priv->phydev, cmd);
-
-       return -EINVAL;
-}
-
-static void nuport_mac_set_msglevel(struct net_device *dev, u32 msg_level)
-{
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-
-       priv->msg_level = msg_level;
-}
-
-static u32 nuport_mac_get_msglevel(struct net_device *dev)
-{
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-
-       return priv->msg_level;
-}
-
-static const struct ethtool_ops nuport_mac_ethtool_ops = {
-       .get_drvinfo            = nuport_mac_ethtool_drvinfo,
-       .get_link               = ethtool_op_get_link,
-       .get_settings           = nuport_mac_ethtool_get_settings,
-       .set_settings           = nuport_mac_ethtool_set_settings,
-       .set_msglevel           = nuport_mac_set_msglevel,
-       .get_msglevel           = nuport_mac_get_msglevel,
-};
-
-static const struct net_device_ops nuport_mac_ops = {
-       .ndo_open               = nuport_mac_open,
-       .ndo_stop               = nuport_mac_close,
-       .ndo_start_xmit         = nuport_mac_start_xmit,
-       .ndo_change_mtu         = eth_change_mtu,
-       .ndo_validate_addr      = eth_validate_addr,
-       .ndo_set_mac_address    = nuport_mac_change_mac_address,
-       .ndo_tx_timeout         = nuport_mac_tx_timeout,
-};
-
-static int __init nuport_mac_probe(struct platform_device *pdev)
-{
-       struct net_device *dev;
-       struct nuport_mac_priv *priv = NULL;
-       struct resource *regs, *dma;
-       int ret = 0;
-       int rx_irq, tx_irq, link_irq;
-       int i;
-       const unsigned int *intspec;
-
-       dev = alloc_etherdev(sizeof(struct nuport_mac_priv));
-       if (!dev) {
-               dev_err(&pdev->dev, "no memory for net_device\n");
-               return -ENOMEM;
-       }
-
-       regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       dma = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-       if (!regs || !dma) {
-               dev_err(&pdev->dev, "failed to get regs resources\n");
-               ret = -ENODEV;
-               goto out;
-       }
-
-       rx_irq = platform_get_irq(pdev, 0);
-       tx_irq = platform_get_irq(pdev, 1);
-       link_irq = platform_get_irq(pdev, 2);
-       if (rx_irq < 0 || tx_irq < 0 || link_irq < 0) {
-               ret = -ENODEV;
-               goto out;
-       }
-
-       platform_set_drvdata(pdev, dev);
-       SET_NETDEV_DEV(dev, &pdev->dev);
-       priv = netdev_priv(dev);
-       priv->pdev = pdev;
-       priv->dev = dev;
-       spin_lock_init(&priv->lock);
-
-       intspec = of_get_property(pdev->dev.of_node,
-                               "nuport-mac,buffer-shifting", NULL);
-       if (!intspec)
-               priv->buffer_shifting_len = 0;
-       else
-               priv->buffer_shifting_len = 2;
-
-       priv->mac_base = devm_request_and_ioremap(&pdev->dev, regs);
-       if (!priv->mac_base) {
-               dev_err(&pdev->dev, "failed to remap regs\n");
-               ret = -ENOMEM;
-               goto out_platform;
-       }
-
-       priv->dma_base = devm_request_and_ioremap(&pdev->dev, dma);
-       if (!priv->dma_base) {
-               dev_err(&pdev->dev, "failed to remap dma-regs\n");
-               ret = -ENOMEM;
-               goto out_platform;
-       }
-
-       priv->emac_clk = clk_get(&pdev->dev, "emac");
-       if (IS_ERR_OR_NULL(priv->emac_clk)) {
-               dev_err(&pdev->dev, "failed to get emac clk\n");
-               ret = PTR_ERR(priv->emac_clk);
-               goto out_platform;
-       }
-
-       priv->ephy_clk = clk_get(&pdev->dev, "ephy");
-       if (IS_ERR_OR_NULL(priv->ephy_clk)) {
-               dev_err(&pdev->dev, "failed to get ephy clk\n");
-               ret = PTR_ERR(priv->ephy_clk);
-               goto out_platform;
-       }
-
-       priv->link_irq = link_irq;
-       priv->rx_irq = rx_irq;
-       priv->tx_irq = tx_irq;
-       priv->msg_level = NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK;
-       dev->netdev_ops = &nuport_mac_ops;
-       dev->ethtool_ops = &nuport_mac_ethtool_ops;
-       dev->watchdog_timeo = HZ;
-       dev->flags = IFF_BROADCAST;     /* Supports Broadcast */
-       dev->tx_queue_len = TX_RING_SIZE / 2;
-
-       netif_napi_add(dev, &priv->napi, nuport_mac_poll, 64);
-
-       priv->phy_node = of_parse_phandle(pdev->dev.of_node, "phy", 0);
-       if (!priv->phy_node) {
-               dev_err(&pdev->dev, "no associated PHY\n");
-               ret = -ENODEV;
-               goto out;
-       }
-
-       priv->phy_interface = of_get_phy_mode(pdev->dev.of_node);
-       if (priv->phy_interface < 0) {
-               dev_err(&pdev->dev, "invalid PHY mode\n");
-               ret = -EINVAL;
-               goto out;
-       }
-
-       priv->mii_bus = mdiobus_alloc();
-       if (!priv->mii_bus) {
-               dev_err(&pdev->dev, "mii bus allocation failed\n");
-               goto out;
-       }
-
-       priv->mii_bus->priv = dev;
-       priv->mii_bus->read = nuport_mac_mii_read;
-       priv->mii_bus->write = nuport_mac_mii_write;
-       priv->mii_bus->reset = nuport_mac_mii_reset;
-       priv->mii_bus->name = "nuport-mac-mii";
-       priv->mii_bus->phy_mask = (1 << 0);
-       snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
-       priv->mii_bus->irq = kzalloc(PHY_MAX_ADDR * sizeof(int), GFP_KERNEL);
-       if (!priv->mii_bus->irq) {
-               dev_err(&pdev->dev, "failed to allocate mii_bus irqs\n");
-               ret = -ENOMEM;
-               goto out_mdio;
-       }
-
-       /* We support PHY interrupts routed back to the MAC */
-       for (i = 0; i < PHY_MAX_ADDR; i++)
-               priv->mii_bus->irq[i] = PHY_IGNORE_INTERRUPT;
-
-       ret = of_mdiobus_register(priv->mii_bus, pdev->dev.of_node);
-       if (ret) {
-               dev_err(&pdev->dev, "failed to register mii_bus\n");
-               goto out_mdio_irq;
-       }
-
-       ret = nuport_mac_mii_probe(dev);
-       if (ret) {
-               dev_err(&pdev->dev, "failed to probe MII bus\n");
-               goto out_mdio_unregister;
-       }
-
-       ret = register_netdev(dev);
-       if (ret) {
-               dev_err(&pdev->dev, "failed to register net_device\n");
-               goto out_mdio_probe;
-       }
-
-       /* read existing mac address */
-       nuport_mac_read_mac_address(dev);
-
-       dev_info(&pdev->dev, "registered (MAC: %pM)\n", dev->dev_addr);
-
-       return ret;
-
-out_mdio_probe:
-       phy_disconnect(priv->phydev);
-out_mdio_unregister:
-       mdiobus_unregister(priv->mii_bus);
-out_mdio_irq:
-       kfree(priv->mii_bus->irq);
-out_mdio:
-       mdiobus_free(priv->mii_bus);
-out_platform:
-       platform_set_drvdata(pdev, NULL);
-out:
-       clk_put(priv->ephy_clk);
-       clk_put(priv->emac_clk);
-       free_netdev(dev);
-       platform_set_drvdata(pdev, NULL);
-       return ret;
-}
-
-static int nuport_mac_remove(struct platform_device *pdev)
-{
-       struct net_device *dev = platform_get_drvdata(pdev);
-       struct nuport_mac_priv *priv = netdev_priv(dev);
-
-       unregister_netdev(dev);
-       phy_disconnect(priv->phydev);
-       mdiobus_unregister(priv->mii_bus);
-       kfree(priv->mii_bus->irq);
-       mdiobus_free(priv->mii_bus);
-       clk_put(priv->ephy_clk);
-       clk_put(priv->emac_clk);
-       free_netdev(dev);
-
-       platform_set_drvdata(pdev, NULL);
-
-       return 0;
-}
-
-static struct of_device_id nuport_eth_ids[] __initdata = {
-       {.compatible = "moschip,nuport-mac",},
-       { /* sentinel */ },
-};
-
-static struct platform_driver nuport_eth_driver = {
-       .driver = {
-               .name = "nuport-mac",
-               .owner = THIS_MODULE,
-               .of_match_table = nuport_eth_ids,
-       },
-       .probe  = nuport_mac_probe,
-       .remove = __devexit_p(nuport_mac_remove),
-};
-
-module_platform_driver(nuport_eth_driver);
-
-MODULE_AUTHOR("Moschip Semiconductors Ltd.");
-MODULE_DESCRIPTION("Moschip MCS8140 Ethernet MAC driver");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/mcs814x/files-3.3/drivers/net/phy/mcs814x.c b/target/linux/mcs814x/files-3.3/drivers/net/phy/mcs814x.c
deleted file mode 100644 (file)
index e92176e..0000000
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Driver for Moschip MCS814x internal PHY
- *
- * Copyright (c) 2012 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/phy.h>
-
-MODULE_DESCRIPTION("Moschip MCS814x PHY driver");
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-MODULE_LICENSE("GPL");
-
-/* Nothing special about this PHY but its OUI (O) */
-static struct phy_driver mcs8140_driver = {
-       .phy_id         = 0,
-       .name           = "Moschip MCS8140",
-       .phy_id_mask    = 0x02,
-       .features       = PHY_BASIC_FEATURES,
-       .config_aneg    = &genphy_config_aneg,
-       .read_status    = &genphy_read_status,
-       .suspend        = genphy_suspend,
-       .resume         = genphy_resume,
-       .driver         = { .owner = THIS_MODULE,},
-};
-
-static int __init mcs814x_phy_init(void)
-{
-       return phy_driver_register(&mcs8140_driver);
-}
-
-static void __exit mcs814x_phy_exit(void)
-{
-       phy_driver_unregister(&mcs8140_driver);
-}
-
-module_init(mcs814x_phy_init);
-module_exit(mcs814x_phy_exit);
-
-static struct mdio_device_id __maybe_unused mcs814x_phy_tbl[] = {
-       { 0x0, 0x0ffffff0 },
-       { }
-};
-
-MODULE_DEVICE_TABLE(mdio, mcs814x_phy_tbl);
diff --git a/target/linux/mcs814x/files-3.3/drivers/usb/host/ehci-mcs814x.c b/target/linux/mcs814x/files-3.3/drivers/usb/host/ehci-mcs814x.c
deleted file mode 100644 (file)
index 183155e..0000000
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * MCS814X EHCI Host Controller Driver
- *
- * Based on "ehci-fsl.c" by Randy Vinson <rvinson@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-#define MCS814X_EHCI_CAPS_OFFSET       0x68
-
-static int mcs814x_ehci_init(struct usb_hcd *hcd)
-{
-       struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-       int retval = 0;
-
-       ehci->caps = hcd->regs + MCS814X_EHCI_CAPS_OFFSET;
-       ehci->regs = hcd->regs
-               + HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
-       ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-       ehci_reset(ehci);
-
-       retval = ehci_init(hcd);
-       if (retval) {
-               pr_err("ehci_init failed\n");
-               return retval;
-       }
-
-       ehci_port_power(ehci, 0);
-
-       return retval;
-}
-
-static const struct hc_driver mcs814x_ehci_hc_driver = {
-       .description            = hcd_name,
-       .product_desc           = "MCS814X EHCI Host Controller",
-       .hcd_priv_size          = sizeof(struct ehci_hcd),
-       .irq                    = ehci_irq,
-       .flags                  = HCD_MEMORY | HCD_USB2,
-       .reset                  = mcs814x_ehci_init,
-       .start                  = ehci_run,
-       .stop                   = ehci_stop,
-       .shutdown               = ehci_shutdown,
-       .urb_enqueue            = ehci_urb_enqueue,
-       .urb_dequeue            = ehci_urb_dequeue,
-       .endpoint_disable       = ehci_endpoint_disable,
-       .get_frame_number       = ehci_get_frame,
-       .hub_status_data        = ehci_hub_status_data,
-       .hub_control            = ehci_hub_control,
-#if defined(CONFIG_PM)
-       .bus_suspend            = ehci_bus_suspend,
-       .bus_resume             = ehci_bus_resume,
-#endif
-       .relinquish_port        = ehci_relinquish_port,
-       .port_handed_over       = ehci_port_handed_over,
-
-       .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
-};
-
-static int mcs814x_ehci_probe(struct platform_device *pdev)
-{
-       struct usb_hcd *hcd;
-       const struct hc_driver *driver = &mcs814x_ehci_hc_driver;
-       struct resource *res;
-       int irq;
-       int retval;
-
-       if (usb_disabled())
-               return -ENODEV;
-
-       res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-       if (!res) {
-               dev_err(&pdev->dev,
-                       "Found HC with no IRQ. Check %s setup!\n",
-                       dev_name(&pdev->dev));
-               return -ENODEV;
-       }
-       irq = res->start;
-
-       pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-       pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
-
-       hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
-       if (!hcd) {
-               retval = -ENOMEM;
-               goto fail_create_hcd;
-       }
-
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!res) {
-               dev_err(&pdev->dev,
-                       "Found HC with no register addr. Check %s setup!\n",
-                       dev_name(&pdev->dev));
-               retval = -ENODEV;
-               goto fail_request_resource;
-       }
-       hcd->rsrc_start = res->start;
-       hcd->rsrc_len = resource_size(res);
-
-       if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
-                               driver->description)) {
-               dev_dbg(&pdev->dev, "controller already in use\n");
-               retval = -EBUSY;
-               goto fail_request_resource;
-       }
-
-       hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-       if (hcd->regs == NULL) {
-               dev_dbg(&pdev->dev, "error mapping memory\n");
-               retval = -EFAULT;
-               goto fail_ioremap;
-       }
-
-       retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
-       if (retval)
-               goto fail_add_hcd;
-
-       dev_info(&pdev->dev, "added MCS814X EHCI driver\n");
-
-       return retval;
-
-fail_add_hcd:
-       iounmap(hcd->regs);
-fail_ioremap:
-       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-fail_request_resource:
-       usb_put_hcd(hcd);
-fail_create_hcd:
-       dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
-       return retval;
-}
-
-static int mcs814x_ehci_remove(struct platform_device *pdev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-       usb_remove_hcd(hcd);
-       iounmap(hcd->regs);
-       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-       usb_put_hcd(hcd);
-
-       return 0;
-}
-
-MODULE_ALIAS("platform:mcs814x-ehci");
-
-static const struct of_device_id mcs814x_ehci_id[] = {
-       { .compatible = "moschip,mcs814x-ehci" },
-       { .compatible = "usb-ehci" },
-       { /* sentinel */ },
-};
-
-static struct platform_driver mcs814x_ehci_driver = {
-       .probe = mcs814x_ehci_probe,
-       .remove = mcs814x_ehci_remove,
-       .driver = {
-               .name = "mcs814x-ehci",
-               .of_match_table = mcs814x_ehci_id,
-       },
-};
diff --git a/target/linux/mcs814x/files-3.3/drivers/usb/host/ohci-mcs814x.c b/target/linux/mcs814x/files-3.3/drivers/usb/host/ohci-mcs814x.c
deleted file mode 100644 (file)
index ef4cb51..0000000
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- *
- * Bus Glue for Moschip MCS814x.
- *
- * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Russell King et al.
- *
- * Modified for LH7A404 from ohci-sa1111.c
- *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
- *
- * Modified for pxa27x from ohci-lh7a404.c
- *  by Nick Bane <nick@cecomputing.co.uk> 26-8-2004
- *
- * Modified for mcs814x from ohci-mcs814x.c
- *  by Lennert Buytenhek <buytenh@wantstofly.org> 28-2-2006
- *  Based on an earlier driver by Ray Lehtiniemi
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/device.h>
-#include <linux/signal.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-static int usb_hcd_mcs814x_probe(const struct hc_driver *driver,
-                        struct platform_device *pdev)
-{
-       int retval;
-       struct usb_hcd *hcd;
-
-       if (pdev->resource[1].flags != IORESOURCE_IRQ) {
-               pr_debug("resource[1] is not IORESOURCE_IRQ");
-               return -ENOMEM;
-       }
-
-       pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-       pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
-
-       hcd = usb_create_hcd(driver, &pdev->dev, "mcs814x");
-       if (hcd == NULL)
-               return -ENOMEM;
-
-       hcd->rsrc_start = pdev->resource[0].start;
-       hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
-       if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-               usb_put_hcd(hcd);
-               retval = -EBUSY;
-               goto err1;
-       }
-
-       hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-       if (hcd->regs == NULL) {
-               pr_debug("ioremap failed");
-               retval = -ENOMEM;
-               goto err2;
-       }
-
-       ohci_hcd_init(hcd_to_ohci(hcd));
-
-       retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
-       if (retval == 0)
-               return retval;
-
-       iounmap(hcd->regs);
-err2:
-       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err1:
-       usb_put_hcd(hcd);
-
-       return retval;
-}
-
-static void usb_hcd_mcs814x_remove(struct usb_hcd *hcd,
-                       struct platform_device *pdev)
-{
-       usb_remove_hcd(hcd);
-       iounmap(hcd->regs);
-       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-       usb_put_hcd(hcd);
-}
-
-static int __devinit ohci_mcs814x_start(struct usb_hcd *hcd)
-{
-       struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-       int ret;
-
-       ret = ohci_init(ohci);
-       if (ret < 0)
-               return ret;
-
-       ret = ohci_run(ohci);
-       if (ret < 0) {
-               ohci_err(ohci, "can't start %s", hcd->self.bus_name);
-               ohci_stop(hcd);
-               return ret;
-       }
-
-       return 0;
-}
-
-static struct hc_driver ohci_mcs814x_hc_driver = {
-       .description            = hcd_name,
-       .product_desc           = "MCS814X OHCI",
-       .hcd_priv_size          = sizeof(struct ohci_hcd),
-       .irq                    = ohci_irq,
-       .flags                  = HCD_USB11 | HCD_MEMORY,
-       .start                  = ohci_mcs814x_start,
-       .stop                   = ohci_stop,
-       .shutdown               = ohci_shutdown,
-       .urb_enqueue            = ohci_urb_enqueue,
-       .urb_dequeue            = ohci_urb_dequeue,
-       .endpoint_disable       = ohci_endpoint_disable,
-       .get_frame_number       = ohci_get_frame,
-       .hub_status_data        = ohci_hub_status_data,
-       .hub_control            = ohci_hub_control,
-#ifdef CONFIG_PM
-       .bus_suspend            = ohci_bus_suspend,
-       .bus_resume             = ohci_bus_resume,
-#endif
-       .start_port_reset       = ohci_start_port_reset,
-};
-
-extern int usb_disabled(void);
-
-static int ohci_hcd_mcs814x_drv_probe(struct platform_device *pdev)
-{
-       int ret;
-
-       ret = -ENODEV;
-       if (!usb_disabled())
-               ret = usb_hcd_mcs814x_probe(&ohci_mcs814x_hc_driver, pdev);
-
-       return ret;
-}
-
-static int ohci_hcd_mcs814x_drv_remove(struct platform_device *pdev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-       usb_hcd_mcs814x_remove(hcd, pdev);
-
-       return 0;
-}
-
-#ifdef CONFIG_PM
-static int ohci_hcd_mcs814x_drv_suspend(struct platform_device *pdev, pm_message_t state)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(pdev);
-       struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-
-       if (time_before(jiffies, ohci->next_statechange))
-               msleep(5);
-       ohci->next_statechange = jiffies;
-
-       hcd->state = HC_STATE_SUSPENDED;
-
-       return 0;
-}
-
-static int ohci_hcd_mcs814x_drv_resume(struct platform_device *pdev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(pdev);
-       struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-       int status;
-
-       if (time_before(jiffies, ohci->next_statechange))
-               msleep(5);
-       ohci->next_statechange = jiffies;
-
-       ohci_finish_controller_resume(hcd);
-       return 0;
-}
-#endif
-
-static const struct of_device_id mcs814x_ohci_id[] = {
-       { .compatible = "moschip,mcs814x-ohci" },
-       { .compatible = "ohci-le" },
-       { /* sentinel */ },
-};
-
-static struct platform_driver ohci_hcd_mcs814x_driver = {
-       .probe          = ohci_hcd_mcs814x_drv_probe,
-       .remove         = ohci_hcd_mcs814x_drv_remove,
-       .shutdown       = usb_hcd_platform_shutdown,
-#ifdef CONFIG_PM
-       .suspend        = ohci_hcd_mcs814x_drv_suspend,
-       .resume         = ohci_hcd_mcs814x_drv_resume,
-#endif
-       .driver         = {
-               .name   = "mcs814x-ohci",
-               .owner  = THIS_MODULE,
-               .of_match_table = mcs814x_ohci_id,
-       },
-};
-
-MODULE_ALIAS("platform:mcs814x-ohci");
diff --git a/target/linux/mcs814x/files-3.3/drivers/watchdog/mcs814x_wdt.c b/target/linux/mcs814x/files-3.3/drivers/watchdog/mcs814x_wdt.c
deleted file mode 100644 (file)
index ca69e8f..0000000
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * Moschip MCS814x Watchdog driver
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/of.h>
-
-#define WDT_COUNT      0x00
-#define WDT_CTRL       0x04
-#define  WDT_CTRL_EN   0x1
-
-/* watchdog frequency */
-#define WDT_MAX_VALUE  (0xffffffff)
-
-struct mcs814x_wdt {
-       void __iomem            *regs;
-       spinlock_t              lock;
-       struct watchdog_device  wdt_dev;
-       struct clk              *clk;
-};
-
-static int mcs814x_wdt_start(struct watchdog_device *dev)
-{
-       struct mcs814x_wdt *wdt = watchdog_get_drvdata(dev);
-       u32 reg;
-
-       spin_lock(&wdt->lock);
-       reg = readl_relaxed(wdt->regs + WDT_CTRL);
-       reg |= WDT_CTRL_EN;
-       writel_relaxed(reg, wdt->regs + WDT_CTRL);
-       spin_unlock(&wdt->lock);
-
-       return 0;
-}
-
-static int mcs814x_wdt_stop(struct watchdog_device *dev)
-{
-       struct mcs814x_wdt *wdt = watchdog_get_drvdata(dev);
-       u32 reg;
-
-       spin_lock(&wdt->lock);
-       reg = readl_relaxed(wdt->regs + WDT_CTRL);
-       reg &= ~WDT_CTRL_EN;
-       writel_relaxed(reg, wdt->regs + WDT_CTRL);
-       spin_unlock(&wdt->lock);
-
-       return 0;
-}
-
-static int mcs814x_wdt_set_timeout(struct watchdog_device *dev,
-                               unsigned int new_timeout)
-{
-       struct mcs814x_wdt *wdt = watchdog_get_drvdata(dev);
-
-       spin_lock(&wdt->lock);
-       /* watchdog counts upward and rollover (0xfffffff -> 0)
-        * triggers the reboot
-        */
-       writel_relaxed(WDT_MAX_VALUE - (new_timeout * clk_get_rate(wdt->clk)),
-               wdt->regs + WDT_COUNT);
-       spin_unlock(&wdt->lock);
-
-       return 0;
-}
-
-static int mcs814x_wdt_ping(struct watchdog_device *dev)
-{
-       /* restart the watchdog */
-       mcs814x_wdt_stop(dev);
-       mcs814x_wdt_set_timeout(dev, dev->timeout);
-       mcs814x_wdt_start(dev);
-
-       return 0;
-}
-
-static const struct watchdog_info mcs814x_wdt_ident = {
-       .options        = WDIOF_CARDRESET | WDIOF_SETTIMEOUT |
-                         WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
-       .identity       = "MCS814x Watchdog",
-};
-
-static struct watchdog_ops mcs814x_wdt_ops = {
-       .owner          = THIS_MODULE,
-       .start          = mcs814x_wdt_start,
-       .stop           = mcs814x_wdt_stop,
-       .set_timeout    = mcs814x_wdt_set_timeout,
-       .ping           = mcs814x_wdt_ping,
-};
-
-static int __devinit mcs814x_wdt_probe(struct platform_device *pdev)
-{
-       struct resource *res;
-       struct mcs814x_wdt *wdt;
-       int ret;
-       struct clk *clk;
-
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!res)
-               return -ENODEV;
-
-       clk = clk_get(NULL, "wdt");
-       if (IS_ERR_OR_NULL(clk)) {
-               dev_err(&pdev->dev, "failed to get watchdog clock\n");
-               return PTR_ERR(clk);
-       }
-
-       wdt = kzalloc(sizeof(*wdt), GFP_KERNEL);
-       if (!wdt) {
-               ret = -ENOMEM;
-               goto out_clk;
-       }
-
-       spin_lock_init(&wdt->lock);
-       wdt->clk = clk;
-       wdt->wdt_dev.info = &mcs814x_wdt_ident;
-       wdt->wdt_dev.ops = &mcs814x_wdt_ops;
-       wdt->wdt_dev.min_timeout = 1;
-       /* approximately 10995 secs */
-       wdt->wdt_dev.max_timeout = (WDT_MAX_VALUE / clk_get_rate(clk));
-
-       platform_set_drvdata(pdev, wdt);
-
-       /* only ioremap registers, because the register is shared */
-       wdt->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-       if (!wdt->regs) {
-               ret = -ENOMEM;
-               goto out;
-       }
-
-       watchdog_set_drvdata(&wdt->wdt_dev, wdt);
-
-       ret = watchdog_register_device(&wdt->wdt_dev);
-       if (ret) {
-               dev_err(&pdev->dev, "cannot register watchdog: %d\n", ret);
-               goto out;
-       }
-
-       dev_info(&pdev->dev, "registered\n");
-       return 0;
-
-out:
-       platform_set_drvdata(pdev, NULL);
-       kfree(wdt);
-out_clk:
-       clk_put(clk);
-       return ret;
-}
-
-static int __devexit mcs814x_wdt_remove(struct platform_device *pdev)
-{
-       struct mcs814x_wdt *wdt = platform_get_drvdata(pdev);
-
-       clk_put(wdt->clk);
-       watchdog_unregister_device(&wdt->wdt_dev);
-       watchdog_set_drvdata(&wdt->wdt_dev, NULL);
-       kfree(wdt);
-       platform_set_drvdata(pdev, NULL);
-
-       return 0;
-}
-
-static const struct of_device_id mcs814x_wdt_ids[] = {
-       { .compatible = "moschip,mcs814x-wdt", },
-       { /* sentinel */ },
-};
-
-static struct platform_driver mcs814x_wdt_driver = {
-       .driver = {
-               .name   = "mcs814x-wdt",
-               .owner  = THIS_MODULE,
-               .of_match_table = mcs814x_wdt_ids,
-       },
-       .probe          = mcs814x_wdt_probe,
-       .remove         = __devexit_p(mcs814x_wdt_remove),
-};
-
-module_platform_driver(mcs814x_wdt_driver);
-
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-MODULE_DESCRIPTION("Moschip MCS814x Watchdog driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-MODULE_ALIAS("platform:mcs814x-wdt");
index 7f8722d6bd9a64a5da9574a52dc1c1c9d842f216..4c8af97d223ee700a73d9eb3bbc8c96b3de40a42 100644 (file)
@@ -9,11 +9,7 @@ include $(INCLUDE_DIR)/image.mk
 
 TARGET_DTBS := rbt-832 dlan-usb-extender
 
-ifeq ($(KERNEL_PATCHVER),3.3)
-DTBS_DIR:=
-else
 DTBS_DIR:=dts/
-endif
 
 LOADADDR:=0x00008000
 
diff --git a/target/linux/mcs814x/patches-3.3/001-platform.patch b/target/linux/mcs814x/patches-3.3/001-platform.patch
deleted file mode 100644 (file)
index 8cfed8c..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -869,6 +869,21 @@ config ARCH_EXYNOS
-       help
-         Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
-+config ARCH_MCS814X
-+      bool "Moschip MCS814x"
-+      select FIQ
-+      select GENERIC_IRQ_CHIP
-+      select GENERIC_GPIO
-+      select ARCH_REQUIRE_GPIOLIB
-+      select CLKDEV_LOOKUP
-+      select ARCH_USES_GETTIMEOFFSET
-+      select NEED_MACH_MEMORY_H
-+      select USB_ARCH_HAS_OHCI
-+      select USB_ARCH_HAS_EHCI
-+      select MULTI_IRQ_HANDLER
-+      help
-+        Support for Moschip MCS814x SoCs (MCS8140).
-+
- config ARCH_SHARK
-       bool "Shark"
-       select CPU_SA110
-@@ -1065,6 +1080,8 @@ source "arch/arm/plat-samsung/Kconfig"
- source "arch/arm/plat-s3c24xx/Kconfig"
- source "arch/arm/plat-s5p/Kconfig"
-+source "arch/arm/mach-mcs814x/Kconfig"
-+
- source "arch/arm/plat-spear/Kconfig"
- if ARCH_S3C2410
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -179,6 +179,7 @@ machine-$(CONFIG_ARCH_S3C64XX)             := s3c64
- machine-$(CONFIG_ARCH_S5P64X0)                := s5p64x0
- machine-$(CONFIG_ARCH_S5PC100)                := s5pc100
- machine-$(CONFIG_ARCH_S5PV210)                := s5pv210
-+machine-$(CONFIG_ARCH_MCS814X)                := mcs814x
- machine-$(CONFIG_ARCH_EXYNOS4)                := exynos
- machine-$(CONFIG_ARCH_SA1100)         := sa1100
- machine-$(CONFIG_ARCH_SHARK)          := shark
diff --git a/target/linux/mcs814x/patches-3.3/003-ethernet.patch b/target/linux/mcs814x/patches-3.3/003-ethernet.patch
deleted file mode 100644 (file)
index ff4faab..0000000
+++ /dev/null
@@ -1,16 +0,0 @@
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -176,4 +176,6 @@ source "drivers/net/ethernet/via/Kconfig
- source "drivers/net/ethernet/xilinx/Kconfig"
- source "drivers/net/ethernet/xircom/Kconfig"
-+source "drivers/net/ethernet/mcs8140/Kconfig"
-+
- endif # ETHERNET
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -74,3 +74,4 @@ obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundr
- obj-$(CONFIG_NET_VENDOR_VIA) += via/
- obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
- obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
-+obj-$(CONFIG_NUPORT_ETHERNET_DRIVER) += mcs8140/
diff --git a/target/linux/mcs814x/patches-3.3/004-usb.patch b/target/linux/mcs814x/patches-3.3/004-usb.patch
deleted file mode 100644 (file)
index 47f7478..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1381,6 +1381,11 @@ MODULE_LICENSE ("GPL");
- #define        PLATFORM_DRIVER         ehci_mv_driver
- #endif
-+#ifdef CONFIG_ARCH_MCS814X
-+#include "ehci-mcs814x.c"
-+#define PLATFORM_DRIVER               mcs814x_ehci_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
-     !defined(XILINX_OF_PLATFORM_DRIVER)
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1121,6 +1121,12 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER               ohci_xls_driver
- #endif
-+#ifdef CONFIG_ARCH_MCS814X
-+#include "ohci-mcs814x.c"
-+#define PLATFORM_DRIVER               ohci_hcd_mcs814x_driver
-+#endif
-+
-+
- #if   !defined(PCI_DRIVER) &&         \
-       !defined(PLATFORM_DRIVER) &&    \
-       !defined(OMAP1_PLATFORM_DRIVER) &&      \
diff --git a/target/linux/mcs814x/patches-3.3/005-mcs814x_rng.patch b/target/linux/mcs814x/patches-3.3/005-mcs814x_rng.patch
deleted file mode 100644 (file)
index 7f7ce8e..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/char/hw_random/Kconfig
-+++ b/drivers/char/hw_random/Kconfig
-@@ -188,6 +188,18 @@ config HW_RANDOM_TX4939
-         If unsure, say Y.
-+config HW_RANDOM_MCS814X
-+      tristate "Moschip MCS814x Random Number Generator"
-+      depends on HW_RANDOM && ARCH_MCS814X
-+      ---help---
-+        This driver provides kernel-side support for the Random Number
-+        Generator hardware found on Moschip MCS814x processors.
-+
-+        To compile this driver as a module, choose M here: the
-+        module will be called mcs814x-rng.
-+
-+        If unusure, say Y.
-+
- config HW_RANDOM_MXC_RNGA
-       tristate "Freescale i.MX RNGA Random Number Generator"
-       depends on HW_RANDOM && ARCH_HAS_RNGA
---- a/drivers/char/hw_random/Makefile
-+++ b/drivers/char/hw_random/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng
- obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
- obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
- obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
-+obj-$(CONFIG_HW_RANDOM_MCS814X) += mcs814x-rng.o
- obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
- obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
- obj-$(CONFIG_HW_RANDOM_NOMADIK) += nomadik-rng.o
diff --git a/target/linux/mcs814x/patches-3.3/006-mcs814x_wdt.patch b/target/linux/mcs814x/patches-3.3/006-mcs814x_wdt.patch
deleted file mode 100644 (file)
index 83547aa..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -343,6 +343,12 @@ config IMX2_WDT
-         To compile this driver as a module, choose M here: the
-         module will be called imx2_wdt.
-+config MCS814X_WATCHDOG
-+      tristate "Moschip MCS814x watchdog"
-+      depends on WATCHDOG_CORE && ARCH_MCS814X
-+      help
-+        Support for the Moschip MCS814x SoCs on-chip watchdog timer.
-+
- # AVR32 Architecture
- config AT32AP700X_WDT
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -53,6 +53,7 @@ obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3
- obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
- obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
- obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
-+obj-$(CONFIG_MCS814X_WATCHDOG) += mcs814x_wdt.o
- # AVR32 Architecture
- obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/target/linux/mcs814x/patches-3.3/008-mcs814x_gpio.patch b/target/linux/mcs814x/patches-3.3/008-mcs814x_gpio.patch
deleted file mode 100644 (file)
index c19a9ba..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -450,6 +450,12 @@ config GPIO_MC33880
-         SPI driver for Freescale MC33880 high-side/low-side switch.
-         This provides GPIO interface supporting inputs and outputs.
-+config GPIO_MCS814X
-+      tristate "Moschip MCS814x GPIO support"
-+      depends on ARCH_MCS814X
-+      help
-+         GPIO driver for Moschip MCS814x SoC gpio controllers.
-+
- config GPIO_74X164
-       tristate "74x164 serial-in/parallel-out 8-bits shift register"
-       depends on SPI_MASTER
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_GPIO_MAX7300)   += gpio-max73
- obj-$(CONFIG_GPIO_MAX7301)    += gpio-max7301.o
- obj-$(CONFIG_GPIO_MAX732X)    += gpio-max732x.o
- obj-$(CONFIG_GPIO_MC33880)    += gpio-mc33880.o
-+obj-$(CONFIG_GPIO_MCS814X)    += gpio-mcs814x.o
- obj-$(CONFIG_GPIO_MCP23S08)   += gpio-mcp23s08.o
- obj-$(CONFIG_GPIO_ML_IOH)     += gpio-ml-ioh.o
- obj-$(CONFIG_GPIO_MPC5200)    += gpio-mpc5200.o
diff --git a/target/linux/mcs814x/patches-3.3/010-fdt_config_cmdline_extend.patch b/target/linux/mcs814x/patches-3.3/010-fdt_config_cmdline_extend.patch
deleted file mode 100644 (file)
index 8735fd8..0000000
+++ /dev/null
@@ -1,140 +0,0 @@
-The old logic assumes CMDLINE_FROM_BOOTLOADER vs. CMDLINE_FORCE and
-ignores CMDLINE_EXTEND.  Here's the old logic:
-
-- CONFIG_CMDLINE_FORCE=true
-    CONFIG_CMDLINE
-- dt bootargs=non-empty:
-    dt bootargs
-- dt bootargs=empty, @data is non-empty string
-    @data is left unchanged
-- dt bootargs=empty, @data is empty string
-    CONFIG_CMDLINE (or "" if that's not defined)
-
-The new logic is now documented in of_fdt.h and is copied here for
-reference:
-
-- CONFIG_CMDLINE_FORCE=true
-    CONFIG_CMDLINE
-- CONFIG_CMDLINE_EXTEND=true, @data is non-empty string
-    @data + dt bootargs (even if dt bootargs are empty)
-- CONFIG_CMDLINE_EXTEND=true, @data is empty string
-    CONFIG_CMDLINE + dt bootargs (even if dt bootargs are empty)
-- CMDLINE_FROM_BOOTLOADER=true, dt bootargs=non-empty:
-    dt bootargs
-- CMDLINE_FROM_BOOTLOADER=true, dt bootargs=empty, @data is non-empty string
-    @data is left unchanged
-- CMDLINE_FROM_BOOTLOADER=true, dt bootargs=empty, @data is empty string
-    CONFIG_CMDLINE (or "" if that's not defined)
-
-Signed-off-by: Doug Anderson <diand...@chromium.org>
-CC: devicetree-discuss@lists.ozlabs.org
-CC: Grant Likely <grant.lik...@secretlab.ca>
-CC: Benjamin Herrenschmidt <b...@kernel.crashing.org>
-CC: Rob Herring <rob.herr...@calxeda.com>
----
-
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -663,6 +663,29 @@ int __init early_init_dt_scan_memory(uns
-       return 0;
- }
-+/*
-+ * Convert configs to something easy to use in C code
-+ */
-+#if defined(CONFIG_CMDLINE_FORCE)
-+static const int overwrite_incoming_cmdline = 1;
-+static const int read_dt_cmdline;
-+static const int concat_cmdline;
-+#elif defined(CONFIG_CMDLINE_EXTEND)
-+static const int overwrite_incoming_cmdline;
-+static const int read_dt_cmdline = 1;
-+static const int concat_cmdline = 1;
-+#else /* CMDLINE_FROM_BOOTLOADER */
-+static const int overwrite_incoming_cmdline;
-+static const int read_dt_cmdline = 1;
-+static const int concat_cmdline;
-+#endif
-+
-+#ifdef CONFIG_CMDLINE
-+static const char *config_cmdline = CONFIG_CMDLINE;
-+#else
-+static const char *config_cmdline = "";
-+#endif
-+
- int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
-                                    int depth, void *data)
- {
-@@ -677,22 +700,26 @@ int __init early_init_dt_scan_chosen(uns
-       early_init_dt_check_for_initrd(node);
--      /* Retrieve command line */
--      p = of_get_flat_dt_prop(node, "bootargs", &l);
--      if (p != NULL && l > 0)
--              strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
--
--      /*
--       * CONFIG_CMDLINE is meant to be a default in case nothing else
--       * managed to set the command line, unless CONFIG_CMDLINE_FORCE
--       * is set in which case we override whatever was found earlier.
--       */
--#ifdef CONFIG_CMDLINE
--#ifndef CONFIG_CMDLINE_FORCE
--      if (!((char *)data)[0])
--#endif
--              strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
--#endif /* CONFIG_CMDLINE */
-+      /* Put CONFIG_CMDLINE in if forced or if data had nothing in it to start */
-+      if (overwrite_incoming_cmdline || !((char *)data)[0])
-+              strlcpy(data, config_cmdline, COMMAND_LINE_SIZE);
-+
-+      /* Retrieve command line unless forcing */
-+      if (read_dt_cmdline) {
-+              p = of_get_flat_dt_prop(node, "bootargs", &l);
-+              if (p != NULL && l > 0) {
-+                      if (concat_cmdline) {
-+                              strlcat(data, " ", COMMAND_LINE_SIZE);
-+                              strlcat(data, p, min_t(int, (int)l,
-+                                              COMMAND_LINE_SIZE));
-+                      } else
-+                              strlcpy(data, p, min_t(int, (int)l,
-+                                              COMMAND_LINE_SIZE));
-+              }
-+      }
-+ 
-+        pr_debug("Command line is: %s\n", (char*)data);
-+ 
-       pr_debug("Command line is: %s\n", (char*)data);
---- a/include/linux/of_fdt.h
-+++ b/include/linux/of_fdt.h
-@@ -91,6 +91,27 @@ extern int of_flat_dt_is_compatible(unsi
- extern int of_flat_dt_match(unsigned long node, const char *const *matches);
- extern unsigned long of_get_flat_dt_root(void);
-+/*
-+ * early_init_dt_scan_chosen - scan the device tree for ramdisk and bootargs
-+ *
-+ * The boot arguments will be placed into the memory pointed to by @data.
-+ * That memory should be COMMAND_LINE_SIZE big and initialized to be a valid
-+ * (possibly empty) string.  Logic for what will be in @data after this
-+ * function finishes:
-+ *
-+ * - CONFIG_CMDLINE_FORCE=true
-+ *     CONFIG_CMDLINE
-+ * - CONFIG_CMDLINE_EXTEND=true, @data is non-empty string
-+ *     @data + dt bootargs (even if dt bootargs are empty)
-+ * - CONFIG_CMDLINE_EXTEND=true, @data is empty string
-+ *     CONFIG_CMDLINE + dt bootargs (even if dt bootargs are empty)
-+ * - CMDLINE_FROM_BOOTLOADER=true, dt bootargs=non-empty:
-+ *     dt bootargs
-+ * - CMDLINE_FROM_BOOTLOADER=true, dt bootargs=empty, @data is non-empty string
-+ *     @data is left unchanged
-+ * - CMDLINE_FROM_BOOTLOADER=true, dt bootargs=empty, @data is empty string
-+ *     CONFIG_CMDLINE (or "" if that's not defined)
-+ */
- extern int early_init_dt_scan_chosen(unsigned long node, const char *uname,
-                                    int depth, void *data);
- extern void early_init_dt_check_for_initrd(unsigned long node);
diff --git a/target/linux/mcs814x/patches-3.3/011-mcs814x_internal_phy.patch b/target/linux/mcs814x/patches-3.3/011-mcs814x_internal_phy.patch
deleted file mode 100644 (file)
index 1b546d7..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -135,6 +135,10 @@ config MICREL_PHY
-       ---help---
-         Currently has a driver for the KSZ8041
-+config MCS814X_PHY
-+      tristate "Driver for the Moschip MCS814x internal PHY"
-+      depends on ARCH_MCS814X
-+
- config FIXED_PHY
-       bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
-       depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -38,3 +38,4 @@ obj-$(CONFIG_STE10XP)                += ste10Xp.o
- obj-$(CONFIG_MICREL_PHY)      += micrel.o
- obj-$(CONFIG_MDIO_OCTEON)     += mdio-octeon.o
- obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
-+obj-$(CONFIG_MCS814X_PHY)     += mcs814x.o
diff --git a/target/linux/mcs814x/patches-3.3/012-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/mcs814x/patches-3.3/012-mtd-cfi_cmdset_0002-force-word-write.patch
deleted file mode 100644 (file)
index 89738a3..0000000
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -39,9 +39,9 @@
- #include <linux/mtd/xip.h>
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
--#define MAX_WORD_RETRIES 3
-+#define MAX_WORD_RETRIES 10
- #define SST49LF004B           0x0060
- #define SST49LF040B           0x0050
diff --git a/target/linux/mcs814x/patches-3.3/013-ohci_workarounds.patch b/target/linux/mcs814x/patches-3.3/013-ohci_workarounds.patch
deleted file mode 100644 (file)
index 9b905a7..0000000
+++ /dev/null
@@ -1,64 +0,0 @@
---- a/drivers/usb/host/ohci.h
-+++ b/drivers/usb/host/ohci.h
-@@ -114,7 +114,7 @@ struct td {
-       /* PSW is only for ISO.  Only 1 PSW entry is used, but on
-        * big-endian PPC hardware that's the second entry.
-        */
--#define MAXPSW        2
-+#define MAXPSW        8
-       __hc16          hwPSW [MAXPSW];
-       /* rest are purely for the driver's use */
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -497,6 +497,7 @@ static int ohci_init (struct ohci_hcd *o
- {
-       int ret;
-       struct usb_hcd *hcd = ohci_to_hcd(ohci);
-+      u32 hcca_area;
-       if (distrust_firmware)
-               ohci->flags |= OHCI_QUIRK_HUB_POWER;
-@@ -550,11 +551,13 @@ static int ohci_init (struct ohci_hcd *o
-       if (ohci->hcca)
-               return 0;
--      ohci->hcca = dma_alloc_coherent (hcd->self.controller,
--                      sizeof *ohci->hcca, &ohci->hcca_dma, 0);
-+      hcca_area = ohci_readl(ohci, &ohci->regs->hcca);
-+      ohci->hcca = ioremap_nocache(hcca_area, sizeof *ohci->hcca);
-       if (!ohci->hcca)
-               return -ENOMEM;
-+      ohci->hcca_dma = hcca_area;
-+
-       if ((ret = ohci_mem_init (ohci)) < 0)
-               ohci_stop (hcd);
-       else {
-@@ -572,6 +575,7 @@ static int ohci_init (struct ohci_hcd *o
-  */
- static int ohci_run (struct ohci_hcd *ohci)
- {
-+      int                     i = 0;
-       u32                     mask, val;
-       int                     first = ohci->fminterval == 0;
-       struct usb_hcd          *hcd = ohci_to_hcd(ohci);
-@@ -622,6 +626,8 @@ static int ohci_run (struct ohci_hcd *oh
-       msleep(val);
-       memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
-+      for (i = 0; i < NUM_INTS; i++)
-+              ohci->hcca->int_table[i] = 0;
-       /* 2msec timelimit here means no irqs/preempt */
-       spin_lock_irq (&ohci->lock);
-@@ -909,9 +915,6 @@ static void ohci_stop (struct usb_hcd *h
-       remove_debug_files (ohci);
-       ohci_mem_cleanup (ohci);
-       if (ohci->hcca) {
--              dma_free_coherent (hcd->self.controller,
--                              sizeof *ohci->hcca,
--                              ohci->hcca, ohci->hcca_dma);
-               ohci->hcca = NULL;
-               ohci->hcca_dma = 0;
-       }