ipq40xx: Fix DTS status parameter values
authorSven Eckelmann <sven.eckelmann@openmesh.com>
Mon, 19 Mar 2018 11:23:00 +0000 (12:23 +0100)
committerMathias Kresin <dev@kresin.me>
Fri, 23 Mar 2018 19:31:49 +0000 (20:31 +0100)
The "Devicetree Speciļ¬cation, Release v0.2 - 2.3.4 status" [1] only allows
the "okay" value for an operational device. The "ok" value will be accepted
by the kernel but should be avoided.

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts

index 772465c..1ccd9f9 100644 (file)
@@ -60,7 +60,7 @@
                        compatible = "qcom,tcsr";
                        reg = <0x194b000 0x100>;
                        qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-                       status = "ok";
+                       status = "okay";
                };
 
                tcsr@1949000 {
                };
 
                usb2: usb2@60f8800 {
-                       status = "ok";
+                       status = "okay";
                };
 
                serial@78af000 {
                        pinctrl-0 = <&serial_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
 
                crypto@8e3a000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                watchdog@b017000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                ess-switch@c000000 {
 };
 
 &blsp_dma {
-       status = "ok";
+       status = "okay";
 };
 
 &spi_0 {
        pinctrl-0 = <&spi_0_pins>;
        pinctrl-names = "default";
-       status = "ok";
+       status = "okay";
        cs-gpios = <&tlmm 54 0>;
 
        m25p80@0 {
 };
 
 &cryptobam {
-       status = "ok";
+       status = "okay";
 };
 
 &gmac0 {
 };
 
 &usb2_hs_phy {
-       status = "ok";
+       status = "okay";
 };
 
 &wifi0 {
index 7e5d123..2b40b9e 100644 (file)
                };
 
                usb2@60f8800 {
-                       status = "ok";
+                       status = "okay";
                };
 
                serial@78af000 {
                        pinctrl-0 = <&serial_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
 
                usb3@8af8800 {
-                       status = "ok";
+                       status = "okay";
                };
 
                crypto@8e3a000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                wifi@a000000 {
                };
 
                watchdog@b017000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                ess-switch@c000000 {
 };
 
 &cryptobam {
-       status = "ok";
+       status = "okay";
 };
 
 &blsp_dma {
-       status = "ok";
+       status = "okay";
 };
 
 &tlmm {
 &spi_0 { /* BLSP1 QUP1 */
        pinctrl-0 = <&spi_0_pins>;
        pinctrl-names = "default";
-       status = "ok";
+       status = "okay";
        cs-gpios = <&tlmm 54 0>,
                   <&tlmm 59 0>;
 
 };
 
 &usb3_ss_phy {
-       status = "ok";
+       status = "okay";
 };
 
 &usb3_hs_phy {
-       status = "ok";
+       status = "okay";
 };
 
 &usb2_hs_phy {
-       status = "ok";
+       status = "okay";
 };
index 99fe8af..753adf9 100644 (file)
                };
 
                blsp_dma: dma@7884000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                spi_0: spi@78b5000 {
                        pinctrl-0 = <&spi_0_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                        cs-gpios = <&tlmm 12 0>;
 
                        mx25l25635e@0 {
                        pinctrl-0 = <&i2c_0_pins>;
                        pinctrl-names = "default";
 
-                       status = "ok";
+                       status = "okay";
                };
 
                serial@78af000 {
                        pinctrl-0 = <&serial_0_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
 
                serial@78b0000 {
                        pinctrl-0 = <&serial_1_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
 
                usb3_ss_phy: ssphy@9a000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                usb3_hs_phy: hsphy@a6000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                usb3: usb3@8af8800 {
-                       status = "ok";
+                       status = "okay";
                };
 
                usb2_hs_phy: hsphy@a8000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                usb2: usb2@60f8800 {
-                       status = "ok";
+                       status = "okay";
                };
 
                cryptobam: dma@8e04000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                crypto@8e3a000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                watchdog@b017000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                qpic_bam: dma@7984000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                nand: qpic-nand@79b0000 {
                        pinctrl-0 = <&nand_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
        };
 };
index f5ca3d5..65e802b 100644 (file)
                };
 
                usb2@60f8800 {
-                       status = "ok";
+                       status = "okay";
                };
 
                serial@78af000 {
                        pinctrl-0 = <&serial_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
 
                usb3@8af8800 {
-                       status = "ok";
+                       status = "okay";
                };
 
                crypto@8e3a000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                wifi@a000000 {
                };
 
                watchdog@b017000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                qca8075: ess-switch@c000000 {
 };
 
 &cryptobam {
-       status = "ok";
+       status = "okay";
 };
 
 &blsp_dma {
-       status = "ok";
+       status = "okay";
 };
 
 &spi_0 { /* BLSP1 QUP1 */
        pinctrl-0 = <&spi_0_pins>;
        pinctrl-names = "default";
-       status = "ok";
+       status = "okay";
        cs-gpios = <&tlmm 54 0>;
 
        mx25l25635f@0 {
                #size-cells = <0>;
                reg = <0>;
                spi-max-frequency = <24000000>;
-               status = "ok";
+               status = "okay";
                m25p,fast-read;
 
                partitions {
 };
 
 &usb3_ss_phy {
-       status = "ok";
+       status = "okay";
 };
 
 &usb3_hs_phy {
-       status = "ok";
+       status = "okay";
 };
 
 &usb2_hs_phy {
-       status = "ok";
+       status = "okay";
 };